OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
linux/arch/arm/mach-pxa/Kconfig

538 lines
10 KiB
Plaintext
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
if ARCH_PXA
[ARM] pxa: PXA3xx base support Signed-off-by: eric miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-09-12 04:13:17 +02:00
menu "Intel PXA2xx/PXA3xx Implementations"
if PXA3xx
menu "Supported PXA3xx Processor Variants"
config CPU_PXA300
bool "PXA300 (codename Monahans-L)"
config CPU_PXA310
bool "PXA310 (codename Monahans-LV)"
select CPU_PXA300
config CPU_PXA320
bool "PXA320 (codename Monahans-P)"
[ARM] pxa: add base support for PXA930 (aka Tavor-P) Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-11 06:45:39 +02:00
config CPU_PXA930
bool "PXA930 (codename Tavor-P)"
[ARM] pxa: introduced cpu_is_pxa935() and cpu_is_pxa9xx() Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-11-26 08:39:39 +01:00
config CPU_PXA935
bool "PXA935 (codename Tavor-P65)"
[ARM] pxa: PXA3xx base support Signed-off-by: eric miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-09-12 04:13:17 +02:00
endmenu
endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
[ARM] 4867/1: Adds flash, udc, mci support for gumstix F boards This patch implements support for Gumstix-F flash, udc and mci. Fixes since the last time are: - Steve Sakoman as maintainer - cleanup for udc and mci setup Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-03-15 05:11:07 +01:00
config ARCH_GUMSTIX
[ARM] pxa/gumstix: fix incorrect init done by am200 Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Andre Puschmann <andre.puschmann@imms.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-09 15:14:29 +01:00
bool "Gumstix XScale 255 boards"
select PXA25x
[ARM] 4867/1: Adds flash, udc, mci support for gumstix F boards This patch implements support for Gumstix-F flash, udc and mci. Fixes since the last time are: - Steve Sakoman as maintainer - cleanup for udc and mci setup Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-03-15 05:11:07 +01:00
help
[ARM] pxa/gumstix: fix incorrect init done by am200 Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Andre Puschmann <andre.puschmann@imms.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-09 15:14:29 +01:00
Say Y here if you intend to run this kernel on
Basix, Connex, ws-200ax, ws-400ax systems
[ARM] 4867/1: Adds flash, udc, mci support for gumstix F boards This patch implements support for Gumstix-F flash, udc and mci. Fixes since the last time are: - Steve Sakoman as maintainer - cleanup for udc and mci setup Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-03-15 05:11:07 +01:00
[ARM] pxa/gumstix: fix incorrect init done by am200 Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Andre Puschmann <andre.puschmann@imms.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-09 15:14:29 +01:00
choice
prompt "Gumstix Carrier/Expansion Board"
[ARM] 5143/1: pxa: further cleanup PXA Kconfig by removing one unnecessary menu level Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-02 14:50:09 +02:00
depends on ARCH_GUMSTIX
[ARM] pxa/gumstix: fix incorrect init done by am200 Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Andre Puschmann <andre.puschmann@imms.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-09 15:14:29 +01:00
config GUMSTIX_AM200EPD
bool "Enable AM200EPD board support"
[ARM] 5354/1: mach-pxa: add AM300 platform driver v3 This patch adds support for the AM300 platform driver which uses the E-Ink broadsheetfb display driver. Cc: Eric Miao <eric.miao@marvell.com> Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-01-01 17:51:01 +01:00
config GUMSTIX_AM300EPD
bool "Enable AM300EPD board support"
[ARM] pxa/gumstix: fix incorrect init done by am200 Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Andre Puschmann <andre.puschmann@imms.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-09 15:14:29 +01:00
endchoice
[ARM] 5143/1: pxa: further cleanup PXA Kconfig by removing one unnecessary menu level Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-02 14:50:09 +02:00
[ARM] pxa: initial support for the Imote2 platform Changes made as suggested by Eric Miao (including fix to map_io silly mistake!). Originally designed by Intel, now sold by Crossbow (www.xbow.com). Very little actually on board. The patch includes sensors and similar as found on commonly occurring daughter boards. Some of the drivers are not in mainline as yet as they are either part of the IIO subsystem or need a lot of work before submission. What is the position wrt to putting them in i2c board configs etc? Support for these boards has been maintained outside the kernel for a long time, but now that there is a good da9030 pmic driver available the last major hurdle no longer exists. All comments welcomed. The Imote2's big brother (stargate2) will follow once any problems with this one have been cleaned up and a few bits and bobs have been added to the da903x driver. Hopefully the cc2420 driver will get cleaned up and submitted in the not too distant future as well. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-12 21:43:09 +01:00
config MACH_INTELMOTE2
bool "Intel Mote 2 Platform"
select PXA27x
select IWMMXT
select PXA_HAVE_BOARD_IRQS
[ARM] 5143/1: pxa: further cleanup PXA Kconfig by removing one unnecessary menu level Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-02 14:50:09 +02:00
[ARM] pxa: Stargate 2 board support Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-05-16 20:20:39 +02:00
config MACH_STARGATE2
bool "Intel Stargate 2 Platform"
select PXA27x
select IWMMXT
select PXA_HAVE_BOARD_IRQS
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
config ARCH_LUBBOCK
bool "Intel DBPXA250 Development Platform"
select PXA25x
select SA1111
[ARM] pxa: introduce PXA_HAVE_BOARD_IRQS Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-22 12:09:38 +02:00
select PXA_HAVE_BOARD_IRQS
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
[ARM] 3417/1: add support for logicpd pxa270 card engine Patch from Lennert Buytenhek Add support for the LogicPD PXA270 Card Engine. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-28 22:08:13 +02:00
config MACH_LOGICPD_PXA270
bool "LogicPD PXA270 Card Engine Development Platform"
select PXA27x
[ARM] pxa: make LogicPD 270 use the generic PWM backlight driver Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-18 14:11:02 +02:00
select HAVE_PWM
[ARM] pxa: introduce PXA_HAVE_BOARD_IRQS Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-22 12:09:38 +02:00
select PXA_HAVE_BOARD_IRQS
[ARM] 3417/1: add support for logicpd pxa270 card engine Patch from Lennert Buytenhek Add support for the LogicPD PXA270 Card Engine. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-28 22:08:13 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
config MACH_MAINSTONE
bool "Intel HCDDBBVA0 Development Platform"
select PXA27x
[ARM] pxa: make mainstone use the generic PWM backlight driver Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-13 22:47:01 +02:00
select HAVE_PWM
[ARM] pxa: introduce PXA_HAVE_BOARD_IRQS Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-22 12:09:38 +02:00
select PXA_HAVE_BOARD_IRQS
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
[ARM] 5277/1: Add basic support for MobilePro 900/c This patch adds basic support for the Mobilepro 900/c mini-laptop. At present it won't do much more than build and boot. Signed-off-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-02 21:15:35 +02:00
config MACH_MP900C
bool "Nec Mobilepro 900/c"
select PXA25x
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
config ARCH_PXA_IDP
bool "Accelent Xscale IDP"
select PXA25x
config PXA_SHARPSL
[PATCH] SharpSL: Add new ARM PXA machines Spitz and Borzoi with partial Akita Support Add the platform support code for two new Sharp Zaurus Models, Spitz (SL-C3000) and Borzoi (SL-C3100). This patch also adds most of the foundations for Akita (SL-C1000) Support. The missing link for Akita is the driver for its I2C io expander. Once this has been finished, the missing Kconfig option and machine declaration can easily be added to this code. Signed-Off-by: Richard Purdie <rpurdie@rpsys.net> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13 10:25:34 +02:00
bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
select SHARP_SCOOP
select SHARP_PARAM
help
Say Y here if you intend to run this kernel on a
[PATCH] SharpSL: Add new ARM PXA machines Spitz and Borzoi with partial Akita Support Add the platform support code for two new Sharp Zaurus Models, Spitz (SL-C3000) and Borzoi (SL-C3100). This patch also adds most of the foundations for Akita (SL-C1000) Support. The missing link for Akita is the driver for its I2C io expander. Once this has been finished, the missing Kconfig option and machine declaration can easily be added to this code. Signed-Off-by: Richard Purdie <rpurdie@rpsys.net> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13 10:25:34 +02:00
Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
[ARM] 3088/1: PXA: Add machine support for the Sharp SL-6000x series of PDAs Patch from Dirk Opfer This patch adds basic machine support for the Sharp SL-6000x (Tosa) PDAs. Signed-off-by: Dirk Opfer Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-06 15:27:52 +01:00
SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
handheld computer.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
[ARM] pxa: fix the corgi_ssp.c dependency issue in {corgi,spitz}_defconfig Separate building of corgi_ssp.c, and introduce a new hidden config option CONFIG_CORGI_SSP_DEPRECATED for this. Aslo mark corgi_ts.c and corgi_bl.c as deprecated. This unbreaks the legacy configs in {corgi,spitz}_defconfig, however, SPI based ADS7846 touchscreen driver and a new SPI-based corgi_lcd.c driver with integrated backlight support are recommended. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-10-21 05:36:19 +02:00
config CORGI_SSP_DEPRECATED
bool
select PXA_SSP
help
This option will include corgi_ssp.c and corgi_lcd.c
that corgi_ts.c and other legacy drivers (corgi_bl.c
and sharpsl_pm.c) may depend on.
[ARM] 5142/1: pxa: move move zaurus declarations to proper place Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-01 16:45:10 +02:00
config MACH_POODLE
bool "Enable Sharp SL-5600 (Poodle) Support"
depends on PXA_SHARPSL
select PXA25x
select SHARP_LOCOMO
select PXA_SSP
config MACH_CORGI
bool "Enable Sharp SL-C700 (Corgi) Support"
depends on PXA_SHARPSL
select PXA25x
select PXA_SHARP_C7xx
config MACH_SHEPHERD
bool "Enable Sharp SL-C750 (Shepherd) Support"
depends on PXA_SHARPSL
select PXA25x
select PXA_SHARP_C7xx
config MACH_HUSKY
bool "Enable Sharp SL-C760 (Husky) Support"
depends on PXA_SHARPSL
select PXA25x
select PXA_SHARP_C7xx
config MACH_AKITA
bool "Enable Sharp SL-1000 (Akita) Support"
depends on PXA_SHARPSL
select PXA27x
select PXA_SHARP_Cxx00
select MACH_SPITZ
select I2C
select I2C_PXA
config MACH_SPITZ
bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
depends on PXA_SHARPSL
select PXA27x
select PXA_SHARP_Cxx00
config MACH_BORZOI
bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
depends on PXA_SHARPSL
select PXA27x
select PXA_SHARP_Cxx00
config MACH_TOSA
bool "Enable Sharp SL-6000x (Tosa) Support"
depends on PXA_SHARPSL
select PXA25x
[ARM] pxa: introduce PXA_HAVE_BOARD_IRQS Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-22 12:09:38 +02:00
select PXA_HAVE_BOARD_IRQS
[ARM] 5142/1: pxa: move move zaurus declarations to proper place Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-01 16:45:10 +02:00
Basic support for the Arcom/Eurotech Viper SBC. Signed-off-by: Marc Zyngier <marc.zyngier@altran.com>
2008-08-14 17:20:31 +02:00
config ARCH_VIPER
bool "Arcom/Eurotech VIPER SBC"
select PXA25x
select ISA
select I2C_GPIO
select HAVE_PWM
select PXA_HAVE_BOARD_IRQS
select PXA_HAVE_ISA_IRQS
[ARM] 5142/1: pxa: move move zaurus declarations to proper place Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-01 16:45:10 +02:00
[ARM] 4649/1: Base support for pxa-based Toshiba e-series PDAs. This patch contains the base code to boot the Toshiba e330, e740, e750, e400, and e800 PDAs. Signed-off-by: Ian Molton <spyro@f2s.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-19 13:16:56 +01:00
config ARCH_PXA_ESERIES
bool "PXA based Toshiba e-series PDAs"
select PXA25x
[ARM] pxa: introduce PXA_HAVE_BOARD_IRQS Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-22 12:09:38 +02:00
select PXA_HAVE_BOARD_IRQS
[ARM] 4649/1: Base support for pxa-based Toshiba e-series PDAs. This patch contains the base code to boot the Toshiba e330, e740, e750, e400, and e800 PDAs. Signed-off-by: Ian Molton <spyro@f2s.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-19 13:16:56 +01:00
config MACH_E330
bool "Toshiba e330"
default y
depends on ARCH_PXA_ESERIES
help
Say Y here if you intend to run this kernel on a Toshiba
e330 family PDA.
Add e350 support Signed-off-by: Ian Molton <spyro@f2s.com>
2008-06-25 23:39:31 +02:00
config MACH_E350
bool "Toshiba e350"
default y
depends on ARCH_PXA_ESERIES
help
Say Y here if you intend to run this kernel on a Toshiba
e350 family PDA.
[ARM] 4649/1: Base support for pxa-based Toshiba e-series PDAs. This patch contains the base code to boot the Toshiba e330, e740, e750, e400, and e800 PDAs. Signed-off-by: Ian Molton <spyro@f2s.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-19 13:16:56 +01:00
config MACH_E740
bool "Toshiba e740"
default y
depends on ARCH_PXA_ESERIES
Support for LCD on e740 e750 e400 and e800 e-series PDAs Signed-off-by: Ian Molton <spyro@f2s.com>
2008-07-10 21:17:27 +02:00
select FB_W100
[ARM] 4649/1: Base support for pxa-based Toshiba e-series PDAs. This patch contains the base code to boot the Toshiba e330, e740, e750, e400, and e800 PDAs. Signed-off-by: Ian Molton <spyro@f2s.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-19 13:16:56 +01:00
help
Say Y here if you intend to run this kernel on a Toshiba
e740 family PDA.
config MACH_E750
bool "Toshiba e750"
default y
depends on ARCH_PXA_ESERIES
Support for LCD on e740 e750 e400 and e800 e-series PDAs Signed-off-by: Ian Molton <spyro@f2s.com>
2008-07-10 21:17:27 +02:00
select FB_W100
[ARM] 4649/1: Base support for pxa-based Toshiba e-series PDAs. This patch contains the base code to boot the Toshiba e330, e740, e750, e400, and e800 PDAs. Signed-off-by: Ian Molton <spyro@f2s.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-19 13:16:56 +01:00
help
Say Y here if you intend to run this kernel on a Toshiba
e750 family PDA.
config MACH_E400
bool "Toshiba e400"
default y
depends on ARCH_PXA_ESERIES
help
Say Y here if you intend to run this kernel on a Toshiba
e400 family PDA.
config MACH_E800
bool "Toshiba e800"
default y
depends on ARCH_PXA_ESERIES
Support for LCD on e740 e750 e400 and e800 e-series PDAs Signed-off-by: Ian Molton <spyro@f2s.com>
2008-07-10 21:17:27 +02:00
select FB_W100
[ARM] 4649/1: Base support for pxa-based Toshiba e-series PDAs. This patch contains the base code to boot the Toshiba e330, e740, e750, e400, and e800 PDAs. Signed-off-by: Ian Molton <spyro@f2s.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-19 13:16:56 +01:00
help
Say Y here if you intend to run this kernel on a Toshiba
e800 family PDA.
[ARM] 5204/1: Trizeps4 SOM update - use MFP-API for GPIO - support TRIZEPS4WL module - cleanups Signed-off-by: Jrgen Schindele <linux@schindele.name> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-18 22:45:03 +02:00
config TRIZEPS_PXA
bool "PXA based Keith und Koep Trizeps DIMM-Modules"
[ARM] pxa: add basic support for HP iPAQ h5000 This patch adds HP iPAQ h5000's (h5400, h5500) basic definitions. Kernel will able to boot, work via serial console, mount filesystems placed on flashes and run USB gadgets (g_ether by default). Other device drivers (frame buffer, LCD, touchscreen, backlight, bluetooth, w1/battery, ...) are depend on SAMCOP and MediaQ SoCs/MFDs, drivers to which will be submitted too, after massive cleanups. This machine will be used as "real user" for these new drivers. This is an updated version of the patch, which contains fixes proposed on linux-arm-kernel mailing list. Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Milan Plzik <milan.plzik@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-10-23 21:06:56 +02:00
config MACH_H5000
bool "HP iPAQ h5000"
select PXA25x
[ARM] 3666/1: TRIZEPS4 [1/5] core Patch from Jrgen Schindele This patch adds support for Trizeps4 SoM and ConXS-evalboard from "Keith und Koep" This DIMM-module is based on PXA270. Signed-off-by: Jrgen Schindele <linux@schindele.name> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 17:01:43 +02:00
config MACH_TRIZEPS4
bool "Keith und Koep Trizeps4 DIMM-Module"
[ARM] 5204/1: Trizeps4 SOM update - use MFP-API for GPIO - support TRIZEPS4WL module - cleanups Signed-off-by: Jrgen Schindele <linux@schindele.name> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-18 22:45:03 +02:00
depends on TRIZEPS_PXA
select TRIZEPS_PCMCIA
[ARM] 3666/1: TRIZEPS4 [1/5] core Patch from Jrgen Schindele This patch adds support for Trizeps4 SoM and ConXS-evalboard from "Keith und Koep" This DIMM-module is based on PXA270. Signed-off-by: Jrgen Schindele <linux@schindele.name> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 17:01:43 +02:00
select PXA27x
[ARM] 5204/1: Trizeps4 SOM update - use MFP-API for GPIO - support TRIZEPS4WL module - cleanups Signed-off-by: Jrgen Schindele <linux@schindele.name> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-18 22:45:03 +02:00
config MACH_TRIZEPS4WL
bool "Keith und Koep Trizeps4-WL DIMM-Module"
depends on TRIZEPS_PXA
select TRIZEPS_PCMCIA
[ARM] 3666/1: TRIZEPS4 [1/5] core Patch from Jrgen Schindele This patch adds support for Trizeps4 SoM and ConXS-evalboard from "Keith und Koep" This DIMM-module is based on PXA270. Signed-off-by: Jrgen Schindele <linux@schindele.name> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 17:01:43 +02:00
select PXA27x
[ARM] 5204/1: Trizeps4 SOM update - use MFP-API for GPIO - support TRIZEPS4WL module - cleanups Signed-off-by: Jrgen Schindele <linux@schindele.name> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-18 22:45:03 +02:00
select PXA_SSP
choice
prompt "Select base board for Trizeps module"
depends on TRIZEPS_PXA
[ARM] 3666/1: TRIZEPS4 [1/5] core Patch from Jrgen Schindele This patch adds support for Trizeps4 SoM and ConXS-evalboard from "Keith und Koep" This DIMM-module is based on PXA270. Signed-off-by: Jrgen Schindele <linux@schindele.name> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 17:01:43 +02:00
[ARM] 5204/1: Trizeps4 SOM update - use MFP-API for GPIO - support TRIZEPS4WL module - cleanups Signed-off-by: Jrgen Schindele <linux@schindele.name> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-18 22:45:03 +02:00
config MACH_TRIZEPS_CONXS
[ARM] 5143/1: pxa: further cleanup PXA Kconfig by removing one unnecessary menu level Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-02 14:50:09 +02:00
bool "ConXS Eval Board"
[ARM] 5204/1: Trizeps4 SOM update - use MFP-API for GPIO - support TRIZEPS4WL module - cleanups Signed-off-by: Jrgen Schindele <linux@schindele.name> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-18 22:45:03 +02:00
config MACH_TRIZEPS_UCONXS
bool "uConXS Eval Board"
config MACH_TRIZEPS_ANY
bool "another Board"
endchoice
config TRIZEPS_PCMCIA
bool
help
Enable PCMCIA support for Trizeps modules
[ARM] 5143/1: pxa: further cleanup PXA Kconfig by removing one unnecessary menu level Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-02 14:50:09 +02:00
[ARM] 4475/2: EM-x270 board support Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-18 12:31:46 +02:00
config MACH_EM_X270
bool "CompuLab EM-x270 platform"
select PXA27x
[ARM] pxa: add eXeda platform support Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-02-02 07:57:55 +01:00
config MACH_EXEDA
bool "CompuLab eXeda platform"
select PXA27x
[ARM] 4762/1: Basic support for Toradex Colibri module This patch adds support for Toradex' PXA27x based Colibri module. It's kept as simple as possible to only provide basic functionality. A default config is also included. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-23 14:54:50 +01:00
config MACH_COLIBRI
[ARM] pxa: rename colibri.c to colibri-pxa270.c Namespace cleanup: rename colibri.c to colibri-pxa270.c and change some names in colibri.h. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-13 16:37:08 +01:00
bool "Toradex Colibri PXA270"
[ARM] 4762/1: Basic support for Toradex Colibri module This patch adds support for Toradex' PXA27x based Colibri module. It's kept as simple as possible to only provide basic functionality. A default config is also included. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-23 14:54:50 +01:00
select PXA27x
[ARM] pxa: add basic support for Colibri PXA300 module This patch add basic support for Toradex' Colibri PXA300 module. Ethernet is enabled conditionally, depdending on CONFIG_AX88796. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-13 16:37:09 +01:00
config MACH_COLIBRI300
[ARM] pxa: Refactor Colibri board support code - Move common function for all Colibri PXA3xx boards to the newly added colibri-pxa3xx.c - Drop some unnecessary defines from colibri.h - Make Kconfig reflect the fact that code for colibri 300 module does also work for the 310 model - Give up on the huge pin config table which was messed up with lots of #ifdefs and switch over to locally defined tables for configured functions Cc: Matthias Meier <matthias.j.meier@gmx.net> Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23 02:04:17 +01:00
bool "Toradex Colibri PXA300/310"
[ARM] pxa: add basic support for Colibri PXA300 module This patch add basic support for Toradex' Colibri PXA300 module. Ethernet is enabled conditionally, depdending on CONFIG_AX88796. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-13 16:37:09 +01:00
select PXA3xx
select CPU_PXA300
[ARM] pxa: Colibri PXA320 module basics This adds basic support for Colibri PXA320 modules. The file colibri-320.c only contains settings specific to this module, such as the Ethernet interface. Cc: Matthias Meier <matthias.j.meier@gmx.net> Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23 02:04:18 +01:00
config MACH_COLIBRI320
bool "Toradex Colibri PXA320"
select PXA3xx
select CPU_PXA320
[ARM] pxa: PXA3xx base support Signed-off-by: eric miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-09-12 04:13:17 +02:00
config MACH_ZYLONITE
[ARM] pxa: add codename zylonite for PXA3xx Development Platform Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-22 09:07:05 +02:00
bool "PXA3xx Development Platform (aka Zylonite)"
[ARM] pxa: PXA3xx base support Signed-off-by: eric miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-09-12 04:13:17 +02:00
select PXA3xx
[ARM] 5111/2: zylonite: Configure SSP SSP3 is connected to the voice PCM of the WM9713 audio codec on the Zylonite so configure the MFPs appropriately and select SSP support. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-10 18:52:10 +02:00
select PXA_SSP
[ARM] pxa: make zylonite use the generic PWM backlight driver Patch mostly by Eric Miao, minor edits by rmk. Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-13 22:46:34 +02:00
select HAVE_PWM
[ARM] pxa: allow IRQ_BOARD_END to be customized and make zylonite to use it The default value is 16 IRQs. Zylonite needs 32, ASIC3 based boards need 70. My problem is still that due to the way IRQ_GPIO is hardcoded, ASIC3 based boards need 70 IRQs starting at IRQ_BOARD_START. If I define ASIC3 IRQs similar to LoCoMo or SA1111, things break as soon as something selects PXA_HAVE_BOARD_IRQS. Increasing the default number of board IRQs to 70 instead doesn't seem very nice. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-17 11:47:57 +02:00
select PXA_HAVE_BOARD_IRQS
[ARM] pxa: PXA3xx base support Signed-off-by: eric miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-09-12 04:13:17 +02:00
[ARM] pxa: add basic support for Littleton (PXA3xx Form Factor Platform) Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-12-13 03:41:43 +01:00
config MACH_LITTLETON
bool "PXA3xx Form Factor Platform (aka Littleton)"
select PXA3xx
select PXA_SSP
[ARM] pxa: add base support for PXA930 Evaluation Board (aka TavorEVB) Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-11 06:59:38 +02:00
config MACH_TAVOREVB
bool "PXA930 Evaluation Board (aka TavorEVB)"
select PXA3xx
[ARM] Kconfig typo fix: "PXA930" -> "CPU_PXA930". Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-02 16:14:15 +02:00
select CPU_PXA930
[ARM] pxa: add base support for PXA930 Evaluation Board (aka TavorEVB) Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-11 06:59:38 +02:00
[ARM] pxa: add base support for PXA930 Handheld Platform (aka SAAR) Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-11 08:02:20 +02:00
config MACH_SAAR
bool "PXA930 Handheld Platform (aka SAAR)"
select PXA3xx
[ARM] Kconfig typo fix: "PXA930" -> "CPU_PXA930". Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-02 16:14:15 +02:00
select CPU_PXA930
[ARM] pxa: add base support for PXA930 Handheld Platform (aka SAAR) Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-11 08:02:20 +02:00
[ARM] 4576/1: CM-X270 machine support This patch provides core support for CM-X270 platform. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-09-23 16:59:26 +02:00
config MACH_ARMCORE
[ARM] 5282/1: pxa: add CM-X255 support Signed-off-by: Russ Dill <russ.dill@gmail.com> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-05 11:26:55 +02:00
bool "CompuLab CM-X255/CM-X270 modules"
[ARM] 4576/1: CM-X270 machine support This patch provides core support for CM-X270 platform. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-09-23 16:59:26 +02:00
select PXA27x
select IWMMXT
[ARM] 5282/1: pxa: add CM-X255 support Signed-off-by: Russ Dill <russ.dill@gmail.com> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-05 11:26:55 +02:00
select PXA25x
select PXA_SSP
[ARM] 4576/1: CM-X270 machine support This patch provides core support for CM-X270 platform. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-09-23 16:59:26 +02:00
[ARM] 5215/2: Add support for CM-X300 board This patch adds core support for CM-X300 board based on PXA300 processor Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-26 15:03:44 +02:00
config MACH_CM_X300
bool "CompuLab CM-X300 modules"
select PXA3xx
select CPU_PXA300
[ARM] 4576/1: CM-X270 machine support This patch provides core support for CM-X270 platform. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-09-23 16:59:26 +02:00
[ARM] pxa: add basic support for HP iPAQ hx4700 PDAs This includes - IrDA (pxafixp_ir), - Buttons (gpio-keys), - ASIC3 IRQ/GPIOs (asic3), - EGPIOs (htc-egpio), - ATI Imageon w3220 framebuffer (w100fb), - Backlight (pwm-backlight), - StrataFlash (physmap), - Battery monitor (ds1wm,w1_ds2760,ds2760_battery) - USB gadget support (pxa27x_udc,gpio_vbus). - bq24022 battery charger (pda_power,bq24022) - TSC2046 touchscreen (ads7846) Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-05-28 07:05:18 +02:00
config MACH_H4700
bool "HP iPAQ hx4700"
select PXA27x
select IWMMXT
select PXA_SSP
select HAVE_PWM
select PXA_HAVE_BOARD_IRQS
[ARM] 4664/1: Add basic support for HTC Magician PDA phones This includes irda, gpio keys, pxafb, backlight, ohci and flash (read-only). Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-22 17:59:11 +01:00
config MACH_MAGICIAN
bool "Enable HTC Magician Support"
select PXA27x
select IWMMXT
[ARM] pxa/magician: select PXA_SSP for touchscreen and sound Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-02-09 17:34:06 +01:00
select PXA_SSP
[ARM] pxa/magician: Enable backlight Magician uses the generic PWM backlight driver, so select HAVE_PWM. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-01-17 18:45:40 +01:00
select HAVE_PWM
[ARM] pxa: introduce PXA_HAVE_BOARD_IRQS Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-22 12:09:38 +02:00
select PXA_HAVE_BOARD_IRQS
[ARM] 4664/1: Add basic support for HTC Magician PDA phones This includes irda, gpio keys, pxafb, backlight, ohci and flash (read-only). Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-22 17:59:11 +01:00
[ARM] 5355/1: Adding support for the HTC Himalaya and its framebuffer Patch adds support for the HTC Himalaya device. It includes hardware definitions and w100fb support. Signed-off-by: Zbynek Michl <Zbynek.Michl@seznam.cz> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-01-02 00:26:13 +01:00
config MACH_HIMALAYA
bool "HTC Himalaya Support"
select CPU_PXA26x
select FB_W100
[ARM] 5202/1: pxa: Added Mitac Mio A701 smartphone support. The Mio A701 support features : - GSM support - Bluetooth support - GPS support - LED/Vibrator support - Suspend/Resume support (very dependant on Mio FlashRam) - Screen/Backlight support - Keys/Keyboard support - USB udc support - MMC/SDIO support - Flash Memory support - Battery/AC plugin support Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-17 10:34:30 +02:00
config MACH_MIOA701
bool "Mitac Mio A701 Support"
select PXA27x
select IWMMXT
select HAVE_PWM
select GPIO_SYSFS
help
Say Y here if you intend to run this kernel on a
MIO A701. Currently there is only basic support
for this PDA.
[ARM] 4664/1: Add basic support for HTC Magician PDA phones This includes irda, gpio keys, pxafb, backlight, ohci and flash (read-only). Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-22 17:59:11 +01:00
[ARM] 4744/1: pcm027: add support for phyCORE-PXA270 CPU module This patch adds main support for the generic phyCORE-PXA270 CPU module (aka PCM-027). Its as generic as possible to support any kind of baseboard. Note: Neither the CPU module nor the pcm027.c implementation can work without a baseboard support. Baseboard support can be added by the PCM-990 or any custom variant. V2: After comments by Eric Miao: - Currently unsupported devices moved into separate patch - direct call of baseboard initialisation V3: After comments by Russell King - sort include files - setting RTC bit for power control removed - style problems fixed (discovered by checkpatch.pl) Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-08 08:44:23 +01:00
config MACH_PCM027
bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
select PXA27x
select IWMMXT
[ARM] 5088/3: pxa2xx: add pxa2xx_set_spi_info to register pxa2xx-spi platform devices Add a function to dynamically allocate and register pxa2xx-spi platform devices, to be used by PXA2xx and PXA3xx based systems. Switch pcm027 and lubbock to use it. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-13 10:17:31 +02:00
select PXA_SSP
[ARM] pxa: introduce PXA_HAVE_BOARD_IRQS Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-22 12:09:38 +02:00
select PXA_HAVE_BOARD_IRQS
[ARM] 4744/1: pcm027: add support for phyCORE-PXA270 CPU module This patch adds main support for the generic phyCORE-PXA270 CPU module (aka PCM-027). Its as generic as possible to support any kind of baseboard. Note: Neither the CPU module nor the pcm027.c implementation can work without a baseboard support. Baseboard support can be added by the PCM-990 or any custom variant. V2: After comments by Eric Miao: - Currently unsupported devices moved into separate patch - direct call of baseboard initialisation V3: After comments by Russell King - sort include files - setting RTC bit for power control removed - style problems fixed (discovered by checkpatch.pl) Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-08 08:44:23 +01:00
[ARM] 5153/1: Add support for PalmTX handheld computer PalmTX is PXA27x based device with wifi, bluetooth, touchscreen, sdio slot, irda, keypad, nand flash, pxa framebuffer, serial and usb gadget interface. Supported by this patch is pxafb, touchscreen, irda, keypad and sdio slot. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-07 18:25:46 +02:00
config ARCH_PXA_PALM
bool "PXA based Palm PDAs"
select HAVE_PWM
[ARM] pxa: Palm Tungsten E2 basic support This contains support for keypad, MMC, AC97, LCD and backlight. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-24 00:29:29 +01:00
config MACH_PALMTE2
bool "Palm Tungsten|E2"
default y
depends on ARCH_PXA_PALM
select PXA25x
help
Say Y here if you intend to run this kernel on a Palm Tungsten|E2
handheld computer.
[ARM] pxa: PalmT5 initial support Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-11-20 00:58:38 +01:00
config MACH_PALMT5
bool "Palm Tungsten|T5"
default y
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
help
Say Y here if you intend to run this kernel on a Palm Tungsten|T5
handheld computer.
[ARM] 5153/1: Add support for PalmTX handheld computer PalmTX is PXA27x based device with wifi, bluetooth, touchscreen, sdio slot, irda, keypad, nand flash, pxa framebuffer, serial and usb gadget interface. Supported by this patch is pxafb, touchscreen, irda, keypad and sdio slot. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-07 18:25:46 +02:00
config MACH_PALMTX
bool "Palm T|X"
default y
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
help
Say Y here if you intend to run this kernel on a Palm T|X
handheld computer.
[ARM] 5238/2: Very basic Palm Zire 72 support This patch contains very basic support of Palm Zire 72. Signed-off-by: Sergey Lapin <slapin@ossfans.org> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-29 16:47:52 +02:00
config MACH_PALMZ72
bool "Palm Zire 72"
default y
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
help
Say Y here if you intend to run this kernel on Palm Zire 72
handheld computer.
[ARM] pxa: PalmLD initial support Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-11-20 22:50:46 +01:00
config MACH_PALMLD
bool "Palm LifeDrive"
default y
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
help
Say Y here if you intend to run this kernel on a Palm LifeDrive
handheld computer.
[ARM] 5238/2: Very basic Palm Zire 72 support This patch contains very basic support of Palm Zire 72. Signed-off-by: Sergey Lapin <slapin@ossfans.org> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-29 16:47:52 +02:00
[ARM] 4747/1: pcm027: support for pcm990 baseboard for phyCORE-PXA270 This patch adds baseboard support for the phyCORE-PXA270 development kit (aka PCM-990). This example shows how to use some phyCORE-PXA270 CPU module features on a baseboard in a standard manner. It could be used as a starting point for custom baseboard development. V2: After comments by Eric Miao: - IRQ chained handler fixed - video/graphic support moved to separate patch - ifdef/endif hell reduced ;-) V3: After comments by Russell King - initialise the mmci platform data statically V4: After comments by Russell King - wrong return value in pcm990_mci_init() fixed Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-08 08:52:04 +01:00
config MACH_PCM990_BASEBOARD
bool "PHYTEC PCM-990 development board"
[ARM] 5094/1: pcm990: Add framebuffer and backlight support PCM990 boards can be assembled with either a Sharp STN or a NEC TFT LCD. This patch adds support for these displays and for the backlight, using the pwm_bl driver. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-13 12:50:44 +02:00
select HAVE_PWM
[ARM] 5143/1: pxa: further cleanup PXA Kconfig by removing one unnecessary menu level Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-02 14:50:09 +02:00
depends on MACH_PCM027
[ARM] 4747/1: pcm027: support for pcm990 baseboard for phyCORE-PXA270 This patch adds baseboard support for the phyCORE-PXA270 development kit (aka PCM-990). This example shows how to use some phyCORE-PXA270 CPU module features on a baseboard in a standard manner. It could be used as a starting point for custom baseboard development. V2: After comments by Eric Miao: - IRQ chained handler fixed - video/graphic support moved to separate patch - ifdef/endif hell reduced ;-) V3: After comments by Russell King - initialise the mmci platform data statically V4: After comments by Russell King - wrong return value in pcm990_mci_init() fixed Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-08 08:52:04 +01:00
[PATCH] SharpSL: Add new ARM PXA machines Spitz and Borzoi with partial Akita Support Add the platform support code for two new Sharp Zaurus Models, Spitz (SL-C3000) and Borzoi (SL-C3100). This patch also adds most of the foundations for Akita (SL-C1000) Support. The missing link for Akita is the driver for its I2C io expander. Once this has been finished, the missing Kconfig option and machine declaration can easily be added to this code. Signed-Off-by: Richard Purdie <rpurdie@rpsys.net> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13 10:25:34 +02:00
choice
[ARM] 5094/1: pcm990: Add framebuffer and backlight support PCM990 boards can be assembled with either a Sharp STN or a NEC TFT LCD. This patch adds support for these displays and for the backlight, using the pwm_bl driver. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-13 12:50:44 +02:00
prompt "display on pcm990"
depends on MACH_PCM990_BASEBOARD
[PATCH] SharpSL: Add new ARM PXA machines Spitz and Borzoi with partial Akita Support Add the platform support code for two new Sharp Zaurus Models, Spitz (SL-C3000) and Borzoi (SL-C3100). This patch also adds most of the foundations for Akita (SL-C1000) Support. The missing link for Akita is the driver for its I2C io expander. Once this has been finished, the missing Kconfig option and machine declaration can easily be added to this code. Signed-Off-by: Richard Purdie <rpurdie@rpsys.net> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13 10:25:34 +02:00
[ARM] 5094/1: pcm990: Add framebuffer and backlight support PCM990 boards can be assembled with either a Sharp STN or a NEC TFT LCD. This patch adds support for these displays and for the backlight, using the pwm_bl driver. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-13 12:50:44 +02:00
config PCM990_DISPLAY_SHARP
bool "sharp lq084v1dg21 stn display"
[PATCH] SharpSL: Add new ARM PXA machines Spitz and Borzoi with partial Akita Support Add the platform support code for two new Sharp Zaurus Models, Spitz (SL-C3000) and Borzoi (SL-C3100). This patch also adds most of the foundations for Akita (SL-C1000) Support. The missing link for Akita is the driver for its I2C io expander. Once this has been finished, the missing Kconfig option and machine declaration can easily be added to this code. Signed-Off-by: Richard Purdie <rpurdie@rpsys.net> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13 10:25:34 +02:00
[ARM] 5094/1: pcm990: Add framebuffer and backlight support PCM990 boards can be assembled with either a Sharp STN or a NEC TFT LCD. This patch adds support for these displays and for the backlight, using the pwm_bl driver. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-13 12:50:44 +02:00
config PCM990_DISPLAY_NEC
bool "nec nl6448bc20_18d tft display"
[PATCH] SharpSL: Add new ARM PXA machines Spitz and Borzoi with partial Akita Support Add the platform support code for two new Sharp Zaurus Models, Spitz (SL-C3000) and Borzoi (SL-C3100). This patch also adds most of the foundations for Akita (SL-C1000) Support. The missing link for Akita is the driver for its I2C io expander. Once this has been finished, the missing Kconfig option and machine declaration can easily be added to this code. Signed-Off-by: Richard Purdie <rpurdie@rpsys.net> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13 10:25:34 +02:00
[ARM] 5094/1: pcm990: Add framebuffer and backlight support PCM990 boards can be assembled with either a Sharp STN or a NEC TFT LCD. This patch adds support for these displays and for the backlight, using the pwm_bl driver. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-13 12:50:44 +02:00
config PCM990_DISPLAY_NONE
bool "no display"
[PATCH] SharpSL: Add new ARM PXA machines Spitz and Borzoi with partial Akita Support Add the platform support code for two new Sharp Zaurus Models, Spitz (SL-C3000) and Borzoi (SL-C3100). This patch also adds most of the foundations for Akita (SL-C1000) Support. The missing link for Akita is the driver for its I2C io expander. Once this has been finished, the missing Kconfig option and machine declaration can easily be added to this code. Signed-Off-by: Richard Purdie <rpurdie@rpsys.net> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13 10:25:34 +02:00
[ARM] 4747/1: pcm027: support for pcm990 baseboard for phyCORE-PXA270 This patch adds baseboard support for the phyCORE-PXA270 development kit (aka PCM-990). This example shows how to use some phyCORE-PXA270 CPU module features on a baseboard in a standard manner. It could be used as a starting point for custom baseboard development. V2: After comments by Eric Miao: - IRQ chained handler fixed - video/graphic support moved to separate patch - ifdef/endif hell reduced ;-) V3: After comments by Russell King - initialise the mmci platform data statically V4: After comments by Russell King - wrong return value in pcm990_mci_init() fixed Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-08 08:52:04 +01:00
endchoice
[PATCH] SharpSL: Add new ARM PXA machines Spitz and Borzoi with partial Akita Support Add the platform support code for two new Sharp Zaurus Models, Spitz (SL-C3000) and Borzoi (SL-C3100). This patch also adds most of the foundations for Akita (SL-C1000) Support. The missing link for Akita is the driver for its I2C io expander. Once this has been finished, the missing Kconfig option and machine declaration can easily be added to this code. Signed-Off-by: Richard Purdie <rpurdie@rpsys.net> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13 10:25:34 +02:00
[ARM] pxa: add initial support for Cogent CSB726 board Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-02-16 18:40:55 +01:00
config MACH_CSB726
bool "Enable Cogent CSB726 System On a Module"
select PXA27x
select IWMMXT
help
Say Y here if you intend to run this kernel on a Cogent
CSB726 System On Module.
[ARM] pxa: add support for CSB701 baseboard CSB701 is one of baseboards that can be used with CSB726 SOM. This currently adds support for button and LED on the board. More to come later. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-02-16 18:40:57 +01:00
config CSB726_CSB701
bool "Enable supprot for CSB701 baseboard"
depends on MACH_CSB726
[ARM] 5162/1: Common code for the Motorola EZX GSM phones Common code for the different EZX GSM phones. Functions to control framebuffer, backlight power, OHCI and UART init. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09 09:08:17 +02:00
config PXA_EZX
bool "Motorola EZX Platform"
select PXA27x
select IWMMXT
select HAVE_PWM
config MACH_EZX_A780
bool "Motorola EZX A780"
default y
depends on PXA_EZX
config MACH_EZX_E680
bool "Motorola EZX E680"
default y
depends on PXA_EZX
config MACH_EZX_A1200
bool "Motorola EZX A1200"
default y
depends on PXA_EZX
config MACH_EZX_A910
bool "Motorola EZX A910"
default y
depends on PXA_EZX
config MACH_EZX_E6
bool "Motorola EZX E6"
default y
depends on PXA_EZX
config MACH_EZX_E2
bool "Motorola EZX E2"
default y
depends on PXA_EZX
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
endmenu
config PXA25x
bool
[ARM] Arrange for platforms to select appropriate CPU support Rather than: config CPU_BLAH bool depends on ARCH_FOO || MACH_BAR default y if ARCH_FOO || MACH_BAR arrange for ARCH_FOO and MACH_BAR to select CPU_BLAH directly. Acked-by: Nicolas Pitre <nico@marvell.com> Acked-by: Andrew Victor <linux@maxim.org.za> Acked-by: Brian Swetland <swetland@google.com> Acked-by: Eric Miao <eric.miao@marvell.com> Acked-by: Nicolas Bellido <ml@acolin.be> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-26 11:55:14 +01:00
select CPU_XSCALE
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
help
Select code specific to PXA21x/25x/26x variants
config PXA27x
bool
[ARM] Arrange for platforms to select appropriate CPU support Rather than: config CPU_BLAH bool depends on ARCH_FOO || MACH_BAR default y if ARCH_FOO || MACH_BAR arrange for ARCH_FOO and MACH_BAR to select CPU_BLAH directly. Acked-by: Nicolas Pitre <nico@marvell.com> Acked-by: Andrew Victor <linux@maxim.org.za> Acked-by: Brian Swetland <swetland@google.com> Acked-by: Eric Miao <eric.miao@marvell.com> Acked-by: Nicolas Bellido <ml@acolin.be> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-26 11:55:14 +01:00
select CPU_XSCALE
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
help
Select code specific to PXA27x variants
[ARM] pxa: add support for additional GPIOs on PXA26x Original patch from Marek Vasut, the problems with PXA26x are: 1. there are additional 4 GPIOs 86,87,88,89 have their direction bits inverted in GPDR2, as well as their alternate function bits being '1' for their GPIO functionality in GAFRx 2. there is no easy way to decide if the processor is a pxa26x or a pxa250/pxa255 at run-time, so the assumption here is the pxa26x will be treated as one of the pxa25x variants, and board code should have a better knowledge of the processor it is featured Introduce pxa26x_init_irq() for the second purpose, and treat the additional GPIOs > 85 on PXA25x specially. Kconfig option CONFIG_CPU_PXA26x is introduced to optimize the code a bit when PXA26x support isn't needed. Board config options have to select this to enable the support for PXA26x. __gpio_is_inverted() will be optimized way when CONFIG_CPU_PXA26x isn't selected. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-11-26 11:12:04 +01:00
config CPU_PXA26x
bool
select PXA25x
help
Select code specific to PXA26x (codename Dalhart)
[ARM] pxa: PXA3xx base support Signed-off-by: eric miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-09-12 04:13:17 +02:00
config PXA3xx
bool
[ARM] Arrange for platforms to select appropriate CPU support Rather than: config CPU_BLAH bool depends on ARCH_FOO || MACH_BAR default y if ARCH_FOO || MACH_BAR arrange for ARCH_FOO and MACH_BAR to select CPU_BLAH directly. Acked-by: Nicolas Pitre <nico@marvell.com> Acked-by: Andrew Victor <linux@maxim.org.za> Acked-by: Brian Swetland <swetland@google.com> Acked-by: Eric Miao <eric.miao@marvell.com> Acked-by: Nicolas Bellido <ml@acolin.be> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-26 11:55:14 +01:00
select CPU_XSC3
[ARM] pxa: PXA3xx base support Signed-off-by: eric miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-09-12 04:13:17 +02:00
help
Select code specific to PXA3xx variants
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
config PXA_SHARP_C7xx
bool
[ARM] 3098/1: pxa2xx disable ssp irq Patch from Liam Girdwood This patch allows users of the pxa SSP driver to register their own irq handlers instead of using the default SSP handler. It also cleans up the CKEN clock and irq detection as the values are now stored in a table. This patch replaces 2845/1 Changes:- o Added flags parameter to ssp_init() o Added SSP_NO_IRQ flag to disable registering of ssp irq handler (for drivers that want to register their own handler) o Cleaned up clock and irq detection, values are now stored in table. o Added build changes to allow other drivers (e.g audio) to select the ssp driver. o corgi_ssp.c changed to use new interface. Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-10 18:45:39 +01:00
select PXA_SSP
[ARM] 3228/1: SharpSL: Move PM code to arch/arm/common Patch from Richard Purdie This patch moves a large chunk of the sharpsl_pm driver to arch/arm/common so that it can be reused on other devices such as the SL-5500 (collie). It also abstracts some functions from the core into the machine and platform specific parts of the driver to aid reuse. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-05 21:44:55 +01:00
select SHARPSL_PM
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
help
Enable support for all Sharp C7xx models
[PATCH] SharpSL: Add new ARM PXA machines Spitz and Borzoi with partial Akita Support Add the platform support code for two new Sharp Zaurus Models, Spitz (SL-C3000) and Borzoi (SL-C3100). This patch also adds most of the foundations for Akita (SL-C1000) Support. The missing link for Akita is the driver for its I2C io expander. Once this has been finished, the missing Kconfig option and machine declaration can easily be added to this code. Signed-Off-by: Richard Purdie <rpurdie@rpsys.net> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13 10:25:34 +02:00
config PXA_SHARP_Cxx00
bool
[ARM] 3098/1: pxa2xx disable ssp irq Patch from Liam Girdwood This patch allows users of the pxa SSP driver to register their own irq handlers instead of using the default SSP handler. It also cleans up the CKEN clock and irq detection as the values are now stored in a table. This patch replaces 2845/1 Changes:- o Added flags parameter to ssp_init() o Added SSP_NO_IRQ flag to disable registering of ssp irq handler (for drivers that want to register their own handler) o Cleaned up clock and irq detection, values are now stored in table. o Added build changes to allow other drivers (e.g audio) to select the ssp driver. o corgi_ssp.c changed to use new interface. Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-10 18:45:39 +01:00
select PXA_SSP
[ARM] 3228/1: SharpSL: Move PM code to arch/arm/common Patch from Richard Purdie This patch moves a large chunk of the sharpsl_pm driver to arch/arm/common so that it can be reused on other devices such as the SL-5500 (collie). It also abstracts some functions from the core into the machine and platform specific parts of the driver to aid reuse. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-05 21:44:55 +01:00
select SHARPSL_PM
[PATCH] SharpSL: Add new ARM PXA machines Spitz and Borzoi with partial Akita Support Add the platform support code for two new Sharp Zaurus Models, Spitz (SL-C3000) and Borzoi (SL-C3100). This patch also adds most of the foundations for Akita (SL-C1000) Support. The missing link for Akita is the driver for its I2C io expander. Once this has been finished, the missing Kconfig option and machine declaration can easily be added to this code. Signed-Off-by: Richard Purdie <rpurdie@rpsys.net> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13 10:25:34 +02:00
help
Enable common support for Sharp Cxx00 models
[ARM] 3098/1: pxa2xx disable ssp irq Patch from Liam Girdwood This patch allows users of the pxa SSP driver to register their own irq handlers instead of using the default SSP handler. It also cleans up the CKEN clock and irq detection as the values are now stored in a table. This patch replaces 2845/1 Changes:- o Added flags parameter to ssp_init() o Added SSP_NO_IRQ flag to disable registering of ssp irq handler (for drivers that want to register their own handler) o Cleaned up clock and irq detection, values are now stored in table. o Added build changes to allow other drivers (e.g audio) to select the ssp driver. o corgi_ssp.c changed to use new interface. Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-10 18:45:39 +01:00
config PXA_SSP
tristate
help
Enable support for PXA2xx SSP ports
[ARM] pxa: Add PXA support for PWM API Patch mainly from Eric Miao, with minor edits by rmk. Note: PWM0 and PWM2 share the same register I/O space and clock gating on pxa{27x, 3xx}, thus PWM2 is treated in the driver as a child PWM of PWM0. And this is also true for PWM1/3. Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-13 22:44:04 +02:00
[ARM] 5150/1: Tosa: support built-in bluetooth power-up The driver is pretty much generic and will be later shared with a few other devices, like hx4700 ipaq. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-05 10:02:48 +02:00
config TOSA_BT
tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
depends on MACH_TOSA
select RFKILL
help
This is a simple driver that is able to control
the state of built in bluetooth chip on tosa.
Merge branch 'pxa-tosa' into pxa Conflicts: arch/arm/mach-pxa/Kconfig arch/arm/mach-pxa/tosa.c arch/arm/mach-pxa/spitz.c
2008-07-12 22:43:01 +02:00
[ARM] pxa: introduce PXA_HAVE_BOARD_IRQS Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-22 12:09:38 +02:00
config PXA_HAVE_BOARD_IRQS
bool
[ARM] 5233/1: Allow PXA to have ISA IRQs numbered 0-15 Allow PXA IRQs to be numbered starting at 16, leaving 0 to 15 for the ISA IRQs, if needed. This patch depends on RMK's PXA_HAVE_BOARD_IRQS patch. Signed-off-by: Marc Zyngier <marc.zyngier@altran.com> Acked-by: Russel King <linux@arm.linux.org.uk> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-01 14:03:32 +02:00
config PXA_HAVE_ISA_IRQS
bool
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
endif