linux/net/mac80211/iface.c

315 lines
8.1 KiB
C
Raw Normal View History

/*
* Copyright 2002-2005, Instant802 Networks, Inc.
* Copyright 2005-2006, Devicescape Software, Inc.
* Copyright (c) 2006 Jiri Benc <jbenc@suse.cz>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/if_arp.h>
#include <linux/netdevice.h>
#include <linux/rtnetlink.h>
#include <net/mac80211.h>
#include "ieee80211_i.h"
#include "sta_info.h"
#include "debugfs_netdev.h"
#include "mesh.h"
void ieee80211_if_sdata_init(struct ieee80211_sub_if_data *sdata)
{
int i;
/* Default values for sub-interface parameters */
sdata->drop_unencrypted = 0;
for (i = 0; i < IEEE80211_FRAGMENT_MAX; i++)
skb_queue_head_init(&sdata->fragments[i].skb_list);
[MAC80211]: rework key handling This moves all the key handling code out from ieee80211_ioctl.c into key.c and also does the following changes including documentation updates in mac80211.h: 1) Turn off hardware acceleration for keys when the interface is down. This is necessary because otherwise monitor interfaces could be decrypting frames for other interfaces that are down at the moment. Also, it should go some way towards better suspend/resume support, in any case the routines used here could be used for that as well. Additionally, this makes the driver interface nicer, keys for a specific local MAC address are only ever present while an interface with that MAC address is enabled. 2) Change driver set_key() callback interface to allow only return values of -ENOSPC, -EOPNOTSUPP and 0, warn on all other return values. This allows debugging the stack when a driver notices it's handed a key while it is down. 3) Invert the flag meaning to KEY_FLAG_UPLOADED_TO_HARDWARE. 4) Remove REMOVE_ALL_KEYS command as it isn't used nor do we want to use it, we'll use DISABLE_KEY for each key. It is hard to use REMOVE_ALL_KEYS because we can handle multiple virtual interfaces with different key configuration, so we'd have to keep track of a lot of state for this and that isn't worth it. 5) Warn when disabling a key fails, it musn't. 6) Remove IEEE80211_HW_NO_TKIP_WMM_HWACCEL in favour of per-key IEEE80211_KEY_FLAG_WMM_STA to let driver sort it out itself. 7) Tell driver that a (non-WEP) key is used only for transmission by using an all-zeroes station MAC address when configuring. 8) Change the set_key() callback to have access to the local MAC address the key is being added for. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-28 23:01:55 +02:00
INIT_LIST_HEAD(&sdata->key_list);
}
static void ieee80211_if_sdata_deinit(struct ieee80211_sub_if_data *sdata)
{
int i;
for (i = 0; i < IEEE80211_FRAGMENT_MAX; i++) {
__skb_queue_purge(&sdata->fragments[i].skb_list);
}
}
/* Must be called with rtnl lock held. */
int ieee80211_if_add(struct net_device *dev, const char *name,
struct net_device **new_dev, int type,
struct vif_params *params)
{
struct net_device *ndev;
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_sub_if_data *sdata = NULL;
int ret;
ASSERT_RTNL();
ndev = alloc_netdev(sizeof(*sdata) + local->hw.vif_data_size,
name, ieee80211_if_setup);
if (!ndev)
return -ENOMEM;
ret = dev_alloc_name(ndev, ndev->name);
if (ret < 0)
goto fail;
memcpy(ndev->dev_addr, local->hw.wiphy->perm_addr, ETH_ALEN);
ndev->base_addr = dev->base_addr;
ndev->irq = dev->irq;
ndev->mem_start = dev->mem_start;
ndev->mem_end = dev->mem_end;
SET_NETDEV_DEV(ndev, wiphy_dev(local->hw.wiphy));
sdata = IEEE80211_DEV_TO_SUB_IF(ndev);
ndev->ieee80211_ptr = &sdata->wdev;
sdata->wdev.wiphy = local->hw.wiphy;
sdata->vif.type = IEEE80211_IF_TYPE_AP;
sdata->dev = ndev;
sdata->local = local;
ieee80211_if_sdata_init(sdata);
ret = register_netdevice(ndev);
if (ret)
goto fail;
ieee80211_debugfs_add_netdev(sdata);
ieee80211_if_set_type(ndev, type);
if (ieee80211_vif_is_mesh(&sdata->vif) &&
params && params->mesh_id_len)
ieee80211_if_sta_set_mesh_id(&sdata->u.sta,
params->mesh_id_len,
params->mesh_id);
/* we're under RTNL so all this is fine */
if (unlikely(local->reg_state == IEEE80211_DEV_UNREGISTERED)) {
__ieee80211_if_del(local, sdata);
return -ENODEV;
}
list_add_tail_rcu(&sdata->list, &local->interfaces);
if (new_dev)
*new_dev = ndev;
return 0;
fail:
free_netdev(ndev);
return ret;
}
void ieee80211_if_set_type(struct net_device *dev, int type)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
int oldtype = sdata->vif.type;
/*
* We need to call this function on the master interface
* which already has a hard_start_xmit routine assigned
* which must not be changed.
*/
if (dev != sdata->local->mdev)
dev->hard_start_xmit = ieee80211_subif_start_xmit;
/*
* Called even when register_netdevice fails, it would
* oops if assigned before initialising the rest.
*/
dev->uninit = ieee80211_if_reinit;
/* most have no BSS pointer */
sdata->bss = NULL;
sdata->vif.type = type;
sdata->basic_rates = 0;
switch (type) {
case IEEE80211_IF_TYPE_WDS:
/* nothing special */
break;
case IEEE80211_IF_TYPE_VLAN:
sdata->u.vlan.ap = NULL;
break;
case IEEE80211_IF_TYPE_AP:
sdata->u.ap.force_unicast_rateidx = -1;
sdata->u.ap.max_ratectrl_rateidx = -1;
skb_queue_head_init(&sdata->u.ap.ps_bc_buf);
sdata->bss = &sdata->u.ap;
INIT_LIST_HEAD(&sdata->u.ap.vlans);
break;
case IEEE80211_IF_TYPE_MESH_POINT:
case IEEE80211_IF_TYPE_STA:
case IEEE80211_IF_TYPE_IBSS: {
struct ieee80211_sub_if_data *msdata;
struct ieee80211_if_sta *ifsta;
ifsta = &sdata->u.sta;
INIT_WORK(&ifsta->work, ieee80211_sta_work);
setup_timer(&ifsta->timer, ieee80211_sta_timer,
(unsigned long) sdata);
skb_queue_head_init(&ifsta->skb_queue);
ifsta->capab = WLAN_CAPABILITY_ESS;
ifsta->auth_algs = IEEE80211_AUTH_ALG_OPEN |
IEEE80211_AUTH_ALG_SHARED_KEY;
ifsta->flags |= IEEE80211_STA_CREATE_IBSS |
IEEE80211_STA_WMM_ENABLED |
IEEE80211_STA_AUTO_BSSID_SEL |
IEEE80211_STA_AUTO_CHANNEL_SEL;
msdata = IEEE80211_DEV_TO_SUB_IF(sdata->local->mdev);
sdata->bss = &msdata->u.ap;
if (ieee80211_vif_is_mesh(&sdata->vif))
ieee80211_mesh_init_sdata(sdata);
break;
}
case IEEE80211_IF_TYPE_MNTR:
dev->type = ARPHRD_IEEE80211_RADIOTAP;
dev->hard_start_xmit = ieee80211_monitor_start_xmit;
sdata->u.mntr_flags = MONITOR_FLAG_CONTROL |
MONITOR_FLAG_OTHER_BSS;
break;
default:
printk(KERN_WARNING "%s: %s: Unknown interface type 0x%x",
dev->name, __func__, type);
}
ieee80211_debugfs_change_if_type(sdata, oldtype);
}
/* Must be called with rtnl lock held. */
void ieee80211_if_reinit(struct net_device *dev)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct sk_buff *skb;
int flushed;
ASSERT_RTNL();
[MAC80211]: rework key handling This moves all the key handling code out from ieee80211_ioctl.c into key.c and also does the following changes including documentation updates in mac80211.h: 1) Turn off hardware acceleration for keys when the interface is down. This is necessary because otherwise monitor interfaces could be decrypting frames for other interfaces that are down at the moment. Also, it should go some way towards better suspend/resume support, in any case the routines used here could be used for that as well. Additionally, this makes the driver interface nicer, keys for a specific local MAC address are only ever present while an interface with that MAC address is enabled. 2) Change driver set_key() callback interface to allow only return values of -ENOSPC, -EOPNOTSUPP and 0, warn on all other return values. This allows debugging the stack when a driver notices it's handed a key while it is down. 3) Invert the flag meaning to KEY_FLAG_UPLOADED_TO_HARDWARE. 4) Remove REMOVE_ALL_KEYS command as it isn't used nor do we want to use it, we'll use DISABLE_KEY for each key. It is hard to use REMOVE_ALL_KEYS because we can handle multiple virtual interfaces with different key configuration, so we'd have to keep track of a lot of state for this and that isn't worth it. 5) Warn when disabling a key fails, it musn't. 6) Remove IEEE80211_HW_NO_TKIP_WMM_HWACCEL in favour of per-key IEEE80211_KEY_FLAG_WMM_STA to let driver sort it out itself. 7) Tell driver that a (non-WEP) key is used only for transmission by using an all-zeroes station MAC address when configuring. 8) Change the set_key() callback to have access to the local MAC address the key is being added for. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-28 23:01:55 +02:00
ieee80211_free_keys(sdata);
ieee80211_if_sdata_deinit(sdata);
/* Need to handle mesh specially to allow eliding the function call */
if (ieee80211_vif_is_mesh(&sdata->vif))
mesh_rmc_free(dev);
switch (sdata->vif.type) {
case IEEE80211_IF_TYPE_INVALID:
/* cannot happen */
WARN_ON(1);
break;
case IEEE80211_IF_TYPE_AP: {
/* Remove all virtual interfaces that use this BSS
* as their sdata->bss */
struct ieee80211_sub_if_data *tsdata, *n;
struct beacon_data *beacon;
list_for_each_entry_safe(tsdata, n, &local->interfaces, list) {
if (tsdata != sdata && tsdata->bss == &sdata->u.ap) {
printk(KERN_DEBUG "%s: removing virtual "
"interface %s because its BSS interface"
" is being removed\n",
sdata->dev->name, tsdata->dev->name);
list_del_rcu(&tsdata->list);
/*
* We have lots of time and can afford
* to sync for each interface
*/
synchronize_rcu();
__ieee80211_if_del(local, tsdata);
}
}
beacon = sdata->u.ap.beacon;
rcu_assign_pointer(sdata->u.ap.beacon, NULL);
synchronize_rcu();
kfree(beacon);
while ((skb = skb_dequeue(&sdata->u.ap.ps_bc_buf))) {
local->total_ps_buffered--;
dev_kfree_skb(skb);
}
break;
}
case IEEE80211_IF_TYPE_WDS:
/* nothing to do */
break;
case IEEE80211_IF_TYPE_MESH_POINT:
case IEEE80211_IF_TYPE_STA:
case IEEE80211_IF_TYPE_IBSS:
kfree(sdata->u.sta.extra_ie);
sdata->u.sta.extra_ie = NULL;
kfree(sdata->u.sta.assocreq_ies);
sdata->u.sta.assocreq_ies = NULL;
kfree(sdata->u.sta.assocresp_ies);
sdata->u.sta.assocresp_ies = NULL;
if (sdata->u.sta.probe_resp) {
dev_kfree_skb(sdata->u.sta.probe_resp);
sdata->u.sta.probe_resp = NULL;
}
break;
case IEEE80211_IF_TYPE_MNTR:
dev->type = ARPHRD_ETHER;
break;
case IEEE80211_IF_TYPE_VLAN:
sdata->u.vlan.ap = NULL;
break;
}
flushed = sta_info_flush(local, sdata);
WARN_ON(flushed);
memset(&sdata->u, 0, sizeof(sdata->u));
ieee80211_if_sdata_init(sdata);
}
/* Must be called with rtnl lock held. */
void __ieee80211_if_del(struct ieee80211_local *local,
struct ieee80211_sub_if_data *sdata)
{
struct net_device *dev = sdata->dev;
ieee80211_debugfs_remove_netdev(sdata);
unregister_netdevice(dev);
/* Except master interface, the net_device will be freed by
* net_device->destructor (i. e. ieee80211_if_free). */
}
/* Must be called with rtnl lock held. */
int ieee80211_if_remove(struct net_device *dev, const char *name, int id)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_sub_if_data *sdata, *n;
ASSERT_RTNL();
list_for_each_entry_safe(sdata, n, &local->interfaces, list) {
if ((sdata->vif.type == id || id == -1) &&
strcmp(name, sdata->dev->name) == 0 &&
sdata->dev != local->mdev) {
list_del_rcu(&sdata->list);
synchronize_rcu();
__ieee80211_if_del(local, sdata);
return 0;
}
}
return -ENODEV;
}
void ieee80211_if_free(struct net_device *dev)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
ieee80211_if_sdata_deinit(sdata);
free_netdev(dev);
}