2005-04-17 00:20:36 +02:00
|
|
|
/*
|
|
|
|
* arch/ppc/platforms/prpmc750_setup.c
|
|
|
|
*
|
|
|
|
* Board setup routines for Motorola PrPMC750
|
|
|
|
*
|
|
|
|
* Author: Matt Porter <mporter@mvista.com>
|
|
|
|
*
|
|
|
|
* 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under
|
|
|
|
* the terms of the GNU General Public License version 2. This program
|
|
|
|
* is licensed "as is" without any warranty of any kind, whether express
|
|
|
|
* or implied.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/config.h>
|
|
|
|
#include <linux/stddef.h>
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/errno.h>
|
|
|
|
#include <linux/reboot.h>
|
|
|
|
#include <linux/pci.h>
|
|
|
|
#include <linux/kdev_t.h>
|
|
|
|
#include <linux/types.h>
|
|
|
|
#include <linux/major.h>
|
|
|
|
#include <linux/initrd.h>
|
|
|
|
#include <linux/console.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/seq_file.h>
|
|
|
|
#include <linux/ide.h>
|
|
|
|
#include <linux/root_dev.h>
|
|
|
|
#include <linux/slab.h>
|
2005-07-27 20:44:10 +02:00
|
|
|
#include <linux/serial_reg.h>
|
2005-04-17 00:20:36 +02:00
|
|
|
|
|
|
|
#include <asm/byteorder.h>
|
|
|
|
#include <asm/system.h>
|
|
|
|
#include <asm/pgtable.h>
|
|
|
|
#include <asm/page.h>
|
|
|
|
#include <asm/dma.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
#include <asm/irq.h>
|
|
|
|
#include <asm/machdep.h>
|
|
|
|
#include <asm/pci-bridge.h>
|
|
|
|
#include <asm/uaccess.h>
|
|
|
|
#include <asm/time.h>
|
|
|
|
#include <asm/open_pic.h>
|
|
|
|
#include <asm/bootinfo.h>
|
|
|
|
#include <asm/hawk.h>
|
|
|
|
|
|
|
|
#include "prpmc750.h"
|
|
|
|
|
|
|
|
extern unsigned long loops_per_jiffy;
|
|
|
|
|
|
|
|
extern void gen550_progress(char *, unsigned short);
|
|
|
|
|
|
|
|
static u_char prpmc750_openpic_initsenses[] __initdata =
|
|
|
|
{
|
|
|
|
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PRPMC750_INT_HOSTINT0 */
|
|
|
|
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PRPMC750_INT_UART */
|
|
|
|
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PRPMC750_INT_DEBUGINT */
|
|
|
|
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PRPMC750_INT_HAWK_WDT */
|
|
|
|
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PRPMC750_INT_UNUSED */
|
|
|
|
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PRPMC750_INT_ABORT */
|
|
|
|
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PRPMC750_INT_HOSTINT1 */
|
|
|
|
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PRPMC750_INT_HOSTINT2 */
|
|
|
|
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PRPMC750_INT_HOSTINT3 */
|
|
|
|
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PRPMC750_INT_PMC_INTA */
|
|
|
|
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PRPMC750_INT_PMC_INTB */
|
|
|
|
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PRPMC750_INT_PMC_INTC */
|
|
|
|
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PRPMC750_INT_PMC_INTD */
|
|
|
|
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PRPMC750_INT_UNUSED */
|
|
|
|
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PRPMC750_INT_UNUSED */
|
|
|
|
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PRPMC750_INT_UNUSED */
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Motorola PrPMC750/PrPMC800 in PrPMCBASE or PrPMC-Carrier
|
|
|
|
* Combined irq tables. Only Base has IDSEL 14, only Carrier has 21 and 22.
|
|
|
|
*/
|
|
|
|
static inline int
|
|
|
|
prpmc_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
|
|
|
|
{
|
|
|
|
static char pci_irq_table[][4] =
|
|
|
|
/*
|
|
|
|
* PCI IDSEL/INTPIN->INTLINE
|
|
|
|
* A B C D
|
|
|
|
*/
|
|
|
|
{
|
|
|
|
{12, 0, 0, 0}, /* IDSEL 14 - Ethernet, base */
|
|
|
|
{0, 0, 0, 0}, /* IDSEL 15 - unused */
|
|
|
|
{10, 11, 12, 9}, /* IDSEL 16 - PMC A1, PMC1 */
|
|
|
|
{10, 11, 12, 9}, /* IDSEL 17 - PrPMC-A-B, PMC2-B */
|
|
|
|
{11, 12, 9, 10}, /* IDSEL 18 - PMC A1-B, PMC1-B */
|
|
|
|
{0, 0, 0, 0}, /* IDSEL 19 - unused */
|
|
|
|
{9, 10, 11, 12}, /* IDSEL 20 - P2P Bridge */
|
|
|
|
{11, 12, 9, 10}, /* IDSEL 21 - PMC A2, carrier */
|
|
|
|
{12, 9, 10, 11}, /* IDSEL 22 - PMC A2-B, carrier */
|
|
|
|
};
|
|
|
|
const long min_idsel = 14, max_idsel = 22, irqs_per_slot = 4;
|
|
|
|
return PCI_IRQ_TABLE_LOOKUP;
|
|
|
|
};
|
|
|
|
|
|
|
|
static void __init prpmc750_pcibios_fixup(void)
|
|
|
|
{
|
|
|
|
struct pci_dev *dev;
|
|
|
|
unsigned short wtmp;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Kludge to clean up after PPC6BUG which doesn't
|
|
|
|
* configure the CL5446 VGA card. Also the
|
|
|
|
* resource subsystem doesn't fixup the
|
|
|
|
* PCI mem resources on the CL5446.
|
|
|
|
*/
|
|
|
|
if ((dev = pci_get_device(PCI_VENDOR_ID_CIRRUS,
|
|
|
|
PCI_DEVICE_ID_CIRRUS_5446, 0))) {
|
|
|
|
dev->resource[0].start += PRPMC750_PCI_PHY_MEM_OFFSET;
|
|
|
|
dev->resource[0].end += PRPMC750_PCI_PHY_MEM_OFFSET;
|
|
|
|
pci_read_config_word(dev, PCI_COMMAND, &wtmp);
|
|
|
|
pci_write_config_word(dev, PCI_COMMAND, wtmp | 3);
|
|
|
|
/* Enable Color mode in MISC reg */
|
|
|
|
outb(0x03, 0x3c2);
|
|
|
|
/* Select DRAM config reg */
|
|
|
|
outb(0x0f, 0x3c4);
|
|
|
|
/* Set proper DRAM config */
|
|
|
|
outb(0xdf, 0x3c5);
|
|
|
|
pci_dev_put(dev);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void __init prpmc750_find_bridges(void)
|
|
|
|
{
|
|
|
|
struct pci_controller *hose;
|
|
|
|
|
|
|
|
hose = pcibios_alloc_controller();
|
|
|
|
if (!hose)
|
|
|
|
return;
|
|
|
|
|
|
|
|
hose->first_busno = 0;
|
|
|
|
hose->last_busno = 0xff;
|
|
|
|
hose->io_base_virt = (void *)PRPMC750_ISA_IO_BASE;
|
|
|
|
hose->pci_mem_offset = PRPMC750_PCI_PHY_MEM_OFFSET;
|
|
|
|
|
|
|
|
pci_init_resource(&hose->io_resource,
|
|
|
|
PRPMC750_PCI_IO_START,
|
|
|
|
PRPMC750_PCI_IO_END,
|
|
|
|
IORESOURCE_IO, "PCI host bridge");
|
|
|
|
|
|
|
|
pci_init_resource(&hose->mem_resources[0],
|
|
|
|
PRPMC750_PROC_PCI_MEM_START,
|
|
|
|
PRPMC750_PROC_PCI_MEM_END,
|
|
|
|
IORESOURCE_MEM, "PCI host bridge");
|
|
|
|
|
|
|
|
hose->io_space.start = PRPMC750_PCI_IO_START;
|
|
|
|
hose->io_space.end = PRPMC750_PCI_IO_END;
|
|
|
|
hose->mem_space.start = PRPMC750_PCI_MEM_START;
|
|
|
|
hose->mem_space.end = PRPMC750_PCI_MEM_END - HAWK_MPIC_SIZE;
|
|
|
|
|
|
|
|
if (hawk_init(hose, PRPMC750_HAWK_PPC_REG_BASE,
|
|
|
|
PRPMC750_PROC_PCI_MEM_START,
|
|
|
|
PRPMC750_PROC_PCI_MEM_END - HAWK_MPIC_SIZE,
|
|
|
|
PRPMC750_PROC_PCI_IO_START, PRPMC750_PROC_PCI_IO_END,
|
|
|
|
PRPMC750_PROC_PCI_MEM_END - HAWK_MPIC_SIZE + 1)
|
|
|
|
!= 0) {
|
|
|
|
printk(KERN_CRIT "Could not initialize host bridge\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
|
|
|
|
|
|
|
|
ppc_md.pcibios_fixup = prpmc750_pcibios_fixup;
|
|
|
|
ppc_md.pci_swizzle = common_swizzle;
|
|
|
|
ppc_md.pci_map_irq = prpmc_map_irq;
|
|
|
|
}
|
|
|
|
static int prpmc750_show_cpuinfo(struct seq_file *m)
|
|
|
|
{
|
|
|
|
seq_printf(m, "machine\t\t: PrPMC750\n");
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __init prpmc750_setup_arch(void)
|
|
|
|
{
|
|
|
|
/* init to some ~sane value until calibrate_delay() runs */
|
|
|
|
loops_per_jiffy = 50000000 / HZ;
|
|
|
|
|
|
|
|
/* Lookup PCI host bridges */
|
|
|
|
prpmc750_find_bridges();
|
|
|
|
|
|
|
|
#ifdef CONFIG_BLK_DEV_INITRD
|
|
|
|
if (initrd_start)
|
|
|
|
ROOT_DEV = Root_RAM0;
|
|
|
|
else
|
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_ROOT_NFS
|
|
|
|
ROOT_DEV = Root_NFS;
|
|
|
|
#else
|
|
|
|
ROOT_DEV = Root_SDA2;
|
|
|
|
#endif
|
|
|
|
|
|
|
|
OpenPIC_InitSenses = prpmc750_openpic_initsenses;
|
|
|
|
OpenPIC_NumInitSenses = sizeof(prpmc750_openpic_initsenses);
|
|
|
|
|
|
|
|
printk(KERN_INFO "Port by MontaVista Software, Inc. "
|
|
|
|
"(source@mvista.com)\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Compute the PrPMC750's bus speed using the baud clock as a
|
|
|
|
* reference.
|
|
|
|
*/
|
|
|
|
static unsigned long __init prpmc750_get_bus_speed(void)
|
|
|
|
{
|
|
|
|
unsigned long tbl_start, tbl_end;
|
|
|
|
unsigned long current_state, old_state, bus_speed;
|
|
|
|
unsigned char lcr, dll, dlm;
|
|
|
|
int baud_divisor, count;
|
|
|
|
|
|
|
|
/* Read the UART's baud clock divisor */
|
|
|
|
lcr = readb(PRPMC750_SERIAL_0_LCR);
|
|
|
|
writeb(lcr | UART_LCR_DLAB, PRPMC750_SERIAL_0_LCR);
|
|
|
|
dll = readb(PRPMC750_SERIAL_0_DLL);
|
|
|
|
dlm = readb(PRPMC750_SERIAL_0_DLM);
|
|
|
|
writeb(lcr & ~UART_LCR_DLAB, PRPMC750_SERIAL_0_LCR);
|
|
|
|
baud_divisor = (dlm << 8) | dll;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Use the baud clock divisor and base baud clock
|
|
|
|
* to determine the baud rate and use that as
|
|
|
|
* the number of baud clock edges we use for
|
|
|
|
* the time base sample. Make it half the baud
|
|
|
|
* rate.
|
|
|
|
*/
|
|
|
|
count = PRPMC750_BASE_BAUD / (baud_divisor * 16);
|
|
|
|
|
|
|
|
/* Find the first edge of the baud clock */
|
|
|
|
old_state = readb(PRPMC750_STATUS_REG) & PRPMC750_BAUDOUT_MASK;
|
|
|
|
do {
|
|
|
|
current_state = readb(PRPMC750_STATUS_REG) &
|
|
|
|
PRPMC750_BAUDOUT_MASK;
|
|
|
|
} while (old_state == current_state);
|
|
|
|
|
|
|
|
old_state = current_state;
|
|
|
|
|
|
|
|
/* Get the starting time base value */
|
|
|
|
tbl_start = get_tbl();
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Loop until we have found a number of edges equal
|
|
|
|
* to half the count (half the baud rate)
|
|
|
|
*/
|
|
|
|
do {
|
|
|
|
do {
|
|
|
|
current_state = readb(PRPMC750_STATUS_REG) &
|
|
|
|
PRPMC750_BAUDOUT_MASK;
|
|
|
|
} while (old_state == current_state);
|
|
|
|
old_state = current_state;
|
|
|
|
} while (--count);
|
|
|
|
|
|
|
|
/* Get the ending time base value */
|
|
|
|
tbl_end = get_tbl();
|
|
|
|
|
|
|
|
/* Compute bus speed */
|
|
|
|
bus_speed = (tbl_end - tbl_start) * 128;
|
|
|
|
|
|
|
|
return bus_speed;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __init prpmc750_calibrate_decr(void)
|
|
|
|
{
|
|
|
|
unsigned long freq;
|
|
|
|
int divisor = 4;
|
|
|
|
|
|
|
|
freq = prpmc750_get_bus_speed();
|
|
|
|
|
|
|
|
tb_ticks_per_jiffy = freq / (HZ * divisor);
|
|
|
|
tb_to_us = mulhwu_scale_factor(freq / divisor, 1000000);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void prpmc750_restart(char *cmd)
|
|
|
|
{
|
|
|
|
local_irq_disable();
|
|
|
|
writeb(PRPMC750_MODRST_MASK, PRPMC750_MODRST_REG);
|
|
|
|
while (1) ;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void prpmc750_halt(void)
|
|
|
|
{
|
|
|
|
local_irq_disable();
|
|
|
|
while (1) ;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void prpmc750_power_off(void)
|
|
|
|
{
|
|
|
|
prpmc750_halt();
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __init prpmc750_init_IRQ(void)
|
|
|
|
{
|
|
|
|
openpic_init(0);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Set BAT 3 to map 0xf0000000 to end of physical memory space.
|
|
|
|
*/
|
|
|
|
static __inline__ void prpmc750_set_bat(void)
|
|
|
|
{
|
|
|
|
mb();
|
|
|
|
mtspr(SPRN_DBAT1U, 0xf0001ffe);
|
|
|
|
mtspr(SPRN_DBAT1L, 0xf000002a);
|
|
|
|
mb();
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* We need to read the Falcon/Hawk memory controller
|
|
|
|
* to properly determine this value
|
|
|
|
*/
|
|
|
|
static unsigned long __init prpmc750_find_end_of_memory(void)
|
|
|
|
{
|
|
|
|
/* Read the memory size from the Hawk SMC */
|
|
|
|
return hawk_get_mem_size(PRPMC750_HAWK_SMC_BASE);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __init prpmc750_map_io(void)
|
|
|
|
{
|
|
|
|
io_block_mapping(PRPMC750_ISA_IO_BASE, PRPMC750_ISA_IO_BASE,
|
|
|
|
0x10000000, _PAGE_IO);
|
|
|
|
#if 0
|
|
|
|
io_block_mapping(0xf0000000, 0xc0000000, 0x08000000, _PAGE_IO);
|
|
|
|
#endif
|
|
|
|
io_block_mapping(0xf8000000, 0xf8000000, 0x08000000, _PAGE_IO);
|
|
|
|
}
|
|
|
|
|
|
|
|
void __init
|
|
|
|
platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
|
|
|
|
unsigned long r6, unsigned long r7)
|
|
|
|
{
|
|
|
|
parse_bootinfo(find_bootinfo());
|
|
|
|
|
|
|
|
/* Cover the Hawk registers with a BAT */
|
|
|
|
prpmc750_set_bat();
|
|
|
|
|
|
|
|
isa_io_base = PRPMC750_ISA_IO_BASE;
|
|
|
|
isa_mem_base = PRPMC750_ISA_MEM_BASE;
|
|
|
|
pci_dram_offset = PRPMC750_PCI_DRAM_OFFSET;
|
|
|
|
|
|
|
|
ppc_md.setup_arch = prpmc750_setup_arch;
|
|
|
|
ppc_md.show_cpuinfo = prpmc750_show_cpuinfo;
|
|
|
|
ppc_md.init_IRQ = prpmc750_init_IRQ;
|
|
|
|
ppc_md.get_irq = openpic_get_irq;
|
|
|
|
|
|
|
|
ppc_md.find_end_of_memory = prpmc750_find_end_of_memory;
|
|
|
|
ppc_md.setup_io_mappings = prpmc750_map_io;
|
|
|
|
|
|
|
|
ppc_md.restart = prpmc750_restart;
|
|
|
|
ppc_md.power_off = prpmc750_power_off;
|
|
|
|
ppc_md.halt = prpmc750_halt;
|
|
|
|
|
|
|
|
/* PrPMC750 has no timekeeper part */
|
|
|
|
ppc_md.time_init = NULL;
|
|
|
|
ppc_md.get_rtc_time = NULL;
|
|
|
|
ppc_md.set_rtc_time = NULL;
|
|
|
|
ppc_md.calibrate_decr = prpmc750_calibrate_decr;
|
|
|
|
|
|
|
|
#ifdef CONFIG_SERIAL_TEXT_DEBUG
|
|
|
|
ppc_md.progress = gen550_progress;
|
|
|
|
#endif /* CONFIG_SERIAL_TEXT_DEBUG */
|
|
|
|
}
|