2009-12-01 15:36:29 +01:00
|
|
|
/*
|
|
|
|
* Libata based driver for Apple "macio" family of PATA controllers
|
|
|
|
*
|
|
|
|
* Copyright 2008/2009 Benjamin Herrenschmidt, IBM Corp
|
|
|
|
* <benh@kernel.crashing.org>
|
|
|
|
*
|
|
|
|
* Some bits and pieces from drivers/ide/ppc/pmac.c
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
|
|
|
#undef DEBUG
|
|
|
|
#undef DEBUG_DMA
|
|
|
|
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/blkdev.h>
|
|
|
|
#include <linux/ata.h>
|
|
|
|
#include <linux/libata.h>
|
|
|
|
#include <linux/adb.h>
|
|
|
|
#include <linux/pmu.h>
|
|
|
|
#include <linux/scatterlist.h>
|
|
|
|
#include <linux/of.h>
|
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 09:04:11 +01:00
|
|
|
#include <linux/gfp.h>
|
2016-02-05 21:58:12 +01:00
|
|
|
#include <linux/pci.h>
|
2009-12-01 15:36:29 +01:00
|
|
|
|
|
|
|
#include <scsi/scsi.h>
|
|
|
|
#include <scsi/scsi_host.h>
|
|
|
|
#include <scsi/scsi_device.h>
|
|
|
|
|
|
|
|
#include <asm/macio.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
#include <asm/dbdma.h>
|
|
|
|
#include <asm/machdep.h>
|
|
|
|
#include <asm/pmac_feature.h>
|
|
|
|
#include <asm/mediabay.h>
|
|
|
|
|
|
|
|
#ifdef DEBUG_DMA
|
|
|
|
#define dev_dbgdma(dev, format, arg...) \
|
|
|
|
dev_printk(KERN_DEBUG , dev , format , ## arg)
|
|
|
|
#else
|
|
|
|
#define dev_dbgdma(dev, format, arg...) \
|
|
|
|
({ if (0) dev_printk(KERN_DEBUG, dev, format, ##arg); 0; })
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#define DRV_NAME "pata_macio"
|
|
|
|
#define DRV_VERSION "0.9"
|
|
|
|
|
|
|
|
/* Models of macio ATA controller */
|
|
|
|
enum {
|
|
|
|
controller_ohare, /* OHare based */
|
|
|
|
controller_heathrow, /* Heathrow/Paddington */
|
|
|
|
controller_kl_ata3, /* KeyLargo ATA-3 */
|
|
|
|
controller_kl_ata4, /* KeyLargo ATA-4 */
|
|
|
|
controller_un_ata6, /* UniNorth2 ATA-6 */
|
|
|
|
controller_k2_ata6, /* K2 ATA-6 */
|
|
|
|
controller_sh_ata6, /* Shasta ATA-6 */
|
|
|
|
};
|
|
|
|
|
|
|
|
static const char* macio_ata_names[] = {
|
|
|
|
"OHare ATA", /* OHare based */
|
|
|
|
"Heathrow ATA", /* Heathrow/Paddington */
|
|
|
|
"KeyLargo ATA-3", /* KeyLargo ATA-3 (MDMA only) */
|
|
|
|
"KeyLargo ATA-4", /* KeyLargo ATA-4 (UDMA/66) */
|
|
|
|
"UniNorth ATA-6", /* UniNorth2 ATA-6 (UDMA/100) */
|
|
|
|
"K2 ATA-6", /* K2 ATA-6 (UDMA/100) */
|
|
|
|
"Shasta ATA-6", /* Shasta ATA-6 (UDMA/133) */
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Extra registers, both 32-bit little-endian
|
|
|
|
*/
|
|
|
|
#define IDE_TIMING_CONFIG 0x200
|
|
|
|
#define IDE_INTERRUPT 0x300
|
|
|
|
|
|
|
|
/* Kauai (U2) ATA has different register setup */
|
|
|
|
#define IDE_KAUAI_PIO_CONFIG 0x200
|
|
|
|
#define IDE_KAUAI_ULTRA_CONFIG 0x210
|
|
|
|
#define IDE_KAUAI_POLL_CONFIG 0x220
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Timing configuration register definitions
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* Number of IDE_SYSCLK_NS ticks, argument is in nanoseconds */
|
|
|
|
#define SYSCLK_TICKS(t) (((t) + IDE_SYSCLK_NS - 1) / IDE_SYSCLK_NS)
|
|
|
|
#define SYSCLK_TICKS_66(t) (((t) + IDE_SYSCLK_66_NS - 1) / IDE_SYSCLK_66_NS)
|
|
|
|
#define IDE_SYSCLK_NS 30 /* 33Mhz cell */
|
|
|
|
#define IDE_SYSCLK_66_NS 15 /* 66Mhz cell */
|
|
|
|
|
|
|
|
/* 133Mhz cell, found in shasta.
|
|
|
|
* See comments about 100 Mhz Uninorth 2...
|
|
|
|
* Note that PIO_MASK and MDMA_MASK seem to overlap, that's just
|
|
|
|
* weird and I don't now why .. at this stage
|
|
|
|
*/
|
|
|
|
#define TR_133_PIOREG_PIO_MASK 0xff000fff
|
|
|
|
#define TR_133_PIOREG_MDMA_MASK 0x00fff800
|
|
|
|
#define TR_133_UDMAREG_UDMA_MASK 0x0003ffff
|
|
|
|
#define TR_133_UDMAREG_UDMA_EN 0x00000001
|
|
|
|
|
|
|
|
/* 100Mhz cell, found in Uninorth 2 and K2. It appears as a pci device
|
|
|
|
* (106b/0033) on uninorth or K2 internal PCI bus and it's clock is
|
|
|
|
* controlled like gem or fw. It appears to be an evolution of keylargo
|
|
|
|
* ATA4 with a timing register extended to 2x32bits registers (one
|
|
|
|
* for PIO & MWDMA and one for UDMA, and a similar DBDMA channel.
|
|
|
|
* It has it's own local feature control register as well.
|
|
|
|
*
|
|
|
|
* After scratching my mind over the timing values, at least for PIO
|
|
|
|
* and MDMA, I think I've figured the format of the timing register,
|
|
|
|
* though I use pre-calculated tables for UDMA as usual...
|
|
|
|
*/
|
|
|
|
#define TR_100_PIO_ADDRSETUP_MASK 0xff000000 /* Size of field unknown */
|
|
|
|
#define TR_100_PIO_ADDRSETUP_SHIFT 24
|
|
|
|
#define TR_100_MDMA_MASK 0x00fff000
|
|
|
|
#define TR_100_MDMA_RECOVERY_MASK 0x00fc0000
|
|
|
|
#define TR_100_MDMA_RECOVERY_SHIFT 18
|
|
|
|
#define TR_100_MDMA_ACCESS_MASK 0x0003f000
|
|
|
|
#define TR_100_MDMA_ACCESS_SHIFT 12
|
|
|
|
#define TR_100_PIO_MASK 0xff000fff
|
|
|
|
#define TR_100_PIO_RECOVERY_MASK 0x00000fc0
|
|
|
|
#define TR_100_PIO_RECOVERY_SHIFT 6
|
|
|
|
#define TR_100_PIO_ACCESS_MASK 0x0000003f
|
|
|
|
#define TR_100_PIO_ACCESS_SHIFT 0
|
|
|
|
|
|
|
|
#define TR_100_UDMAREG_UDMA_MASK 0x0000ffff
|
|
|
|
#define TR_100_UDMAREG_UDMA_EN 0x00000001
|
|
|
|
|
|
|
|
|
|
|
|
/* 66Mhz cell, found in KeyLargo. Can do ultra mode 0 to 2 on
|
|
|
|
* 40 connector cable and to 4 on 80 connector one.
|
|
|
|
* Clock unit is 15ns (66Mhz)
|
|
|
|
*
|
|
|
|
* 3 Values can be programmed:
|
|
|
|
* - Write data setup, which appears to match the cycle time. They
|
|
|
|
* also call it DIOW setup.
|
|
|
|
* - Ready to pause time (from spec)
|
|
|
|
* - Address setup. That one is weird. I don't see where exactly
|
|
|
|
* it fits in UDMA cycles, I got it's name from an obscure piece
|
|
|
|
* of commented out code in Darwin. They leave it to 0, we do as
|
|
|
|
* well, despite a comment that would lead to think it has a
|
|
|
|
* min value of 45ns.
|
|
|
|
* Apple also add 60ns to the write data setup (or cycle time ?) on
|
|
|
|
* reads.
|
|
|
|
*/
|
|
|
|
#define TR_66_UDMA_MASK 0xfff00000
|
|
|
|
#define TR_66_UDMA_EN 0x00100000 /* Enable Ultra mode for DMA */
|
|
|
|
#define TR_66_PIO_ADDRSETUP_MASK 0xe0000000 /* Address setup */
|
|
|
|
#define TR_66_PIO_ADDRSETUP_SHIFT 29
|
|
|
|
#define TR_66_UDMA_RDY2PAUS_MASK 0x1e000000 /* Ready 2 pause time */
|
|
|
|
#define TR_66_UDMA_RDY2PAUS_SHIFT 25
|
|
|
|
#define TR_66_UDMA_WRDATASETUP_MASK 0x01e00000 /* Write data setup time */
|
|
|
|
#define TR_66_UDMA_WRDATASETUP_SHIFT 21
|
|
|
|
#define TR_66_MDMA_MASK 0x000ffc00
|
|
|
|
#define TR_66_MDMA_RECOVERY_MASK 0x000f8000
|
|
|
|
#define TR_66_MDMA_RECOVERY_SHIFT 15
|
|
|
|
#define TR_66_MDMA_ACCESS_MASK 0x00007c00
|
|
|
|
#define TR_66_MDMA_ACCESS_SHIFT 10
|
|
|
|
#define TR_66_PIO_MASK 0xe00003ff
|
|
|
|
#define TR_66_PIO_RECOVERY_MASK 0x000003e0
|
|
|
|
#define TR_66_PIO_RECOVERY_SHIFT 5
|
|
|
|
#define TR_66_PIO_ACCESS_MASK 0x0000001f
|
|
|
|
#define TR_66_PIO_ACCESS_SHIFT 0
|
|
|
|
|
|
|
|
/* 33Mhz cell, found in OHare, Heathrow (& Paddington) and KeyLargo
|
|
|
|
* Can do pio & mdma modes, clock unit is 30ns (33Mhz)
|
|
|
|
*
|
|
|
|
* The access time and recovery time can be programmed. Some older
|
|
|
|
* Darwin code base limit OHare to 150ns cycle time. I decided to do
|
|
|
|
* the same here fore safety against broken old hardware ;)
|
|
|
|
* The HalfTick bit, when set, adds half a clock (15ns) to the access
|
|
|
|
* time and removes one from recovery. It's not supported on KeyLargo
|
|
|
|
* implementation afaik. The E bit appears to be set for PIO mode 0 and
|
|
|
|
* is used to reach long timings used in this mode.
|
|
|
|
*/
|
|
|
|
#define TR_33_MDMA_MASK 0x003ff800
|
|
|
|
#define TR_33_MDMA_RECOVERY_MASK 0x001f0000
|
|
|
|
#define TR_33_MDMA_RECOVERY_SHIFT 16
|
|
|
|
#define TR_33_MDMA_ACCESS_MASK 0x0000f800
|
|
|
|
#define TR_33_MDMA_ACCESS_SHIFT 11
|
|
|
|
#define TR_33_MDMA_HALFTICK 0x00200000
|
|
|
|
#define TR_33_PIO_MASK 0x000007ff
|
|
|
|
#define TR_33_PIO_E 0x00000400
|
|
|
|
#define TR_33_PIO_RECOVERY_MASK 0x000003e0
|
|
|
|
#define TR_33_PIO_RECOVERY_SHIFT 5
|
|
|
|
#define TR_33_PIO_ACCESS_MASK 0x0000001f
|
|
|
|
#define TR_33_PIO_ACCESS_SHIFT 0
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Interrupt register definitions. Only present on newer cells
|
|
|
|
* (Keylargo and later afaik) so we don't use it.
|
|
|
|
*/
|
|
|
|
#define IDE_INTR_DMA 0x80000000
|
|
|
|
#define IDE_INTR_DEVICE 0x40000000
|
|
|
|
|
|
|
|
/*
|
|
|
|
* FCR Register on Kauai. Not sure what bit 0x4 is ...
|
|
|
|
*/
|
|
|
|
#define KAUAI_FCR_UATA_MAGIC 0x00000004
|
|
|
|
#define KAUAI_FCR_UATA_RESET_N 0x00000002
|
|
|
|
#define KAUAI_FCR_UATA_ENABLE 0x00000001
|
|
|
|
|
|
|
|
|
|
|
|
/* Allow up to 256 DBDMA commands per xfer */
|
|
|
|
#define MAX_DCMDS 256
|
|
|
|
|
|
|
|
/* Don't let a DMA segment go all the way to 64K */
|
|
|
|
#define MAX_DBDMA_SEG 0xff00
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Wait 1s for disk to answer on IDE bus after a hard reset
|
|
|
|
* of the device (via GPIO/FCR).
|
|
|
|
*
|
|
|
|
* Some devices seem to "pollute" the bus even after dropping
|
|
|
|
* the BSY bit (typically some combo drives slave on the UDMA
|
|
|
|
* bus) after a hard reset. Since we hard reset all drives on
|
|
|
|
* KeyLargo ATA66, we have to keep that delay around. I may end
|
|
|
|
* up not hard resetting anymore on these and keep the delay only
|
|
|
|
* for older interfaces instead (we have to reset when coming
|
|
|
|
* from MacOS...) --BenH.
|
|
|
|
*/
|
|
|
|
#define IDE_WAKEUP_DELAY_MS 1000
|
|
|
|
|
|
|
|
struct pata_macio_timing;
|
|
|
|
|
|
|
|
struct pata_macio_priv {
|
|
|
|
int kind;
|
|
|
|
int aapl_bus_id;
|
|
|
|
int mediabay : 1;
|
|
|
|
struct device_node *node;
|
|
|
|
struct macio_dev *mdev;
|
|
|
|
struct pci_dev *pdev;
|
|
|
|
struct device *dev;
|
|
|
|
int irq;
|
|
|
|
u32 treg[2][2];
|
|
|
|
void __iomem *tfregs;
|
|
|
|
void __iomem *kauai_fcr;
|
|
|
|
struct dbdma_cmd * dma_table_cpu;
|
|
|
|
dma_addr_t dma_table_dma;
|
|
|
|
struct ata_host *host;
|
|
|
|
const struct pata_macio_timing *timings;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Previous variants of this driver used to calculate timings
|
|
|
|
* for various variants of the chip and use tables for others.
|
|
|
|
*
|
|
|
|
* Not only was this confusing, but in addition, it isn't clear
|
|
|
|
* whether our calculation code was correct. It didn't entirely
|
|
|
|
* match the darwin code and whatever documentation I could find
|
|
|
|
* on these cells
|
|
|
|
*
|
|
|
|
* I decided to entirely rely on a table instead for this version
|
|
|
|
* of the driver. Also, because I don't really care about derated
|
|
|
|
* modes and really old HW other than making it work, I'm not going
|
|
|
|
* to calculate / snoop timing values for something else than the
|
|
|
|
* standard modes.
|
|
|
|
*/
|
|
|
|
struct pata_macio_timing {
|
|
|
|
int mode;
|
|
|
|
u32 reg1; /* Bits to set in first timing reg */
|
|
|
|
u32 reg2; /* Bits to set in second timing reg */
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct pata_macio_timing pata_macio_ohare_timings[] = {
|
|
|
|
{ XFER_PIO_0, 0x00000526, 0, },
|
|
|
|
{ XFER_PIO_1, 0x00000085, 0, },
|
|
|
|
{ XFER_PIO_2, 0x00000025, 0, },
|
|
|
|
{ XFER_PIO_3, 0x00000025, 0, },
|
|
|
|
{ XFER_PIO_4, 0x00000025, 0, },
|
|
|
|
{ XFER_MW_DMA_0, 0x00074000, 0, },
|
|
|
|
{ XFER_MW_DMA_1, 0x00221000, 0, },
|
|
|
|
{ XFER_MW_DMA_2, 0x00211000, 0, },
|
|
|
|
{ -1, 0, 0 }
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct pata_macio_timing pata_macio_heathrow_timings[] = {
|
|
|
|
{ XFER_PIO_0, 0x00000526, 0, },
|
|
|
|
{ XFER_PIO_1, 0x00000085, 0, },
|
|
|
|
{ XFER_PIO_2, 0x00000025, 0, },
|
|
|
|
{ XFER_PIO_3, 0x00000025, 0, },
|
|
|
|
{ XFER_PIO_4, 0x00000025, 0, },
|
|
|
|
{ XFER_MW_DMA_0, 0x00074000, 0, },
|
|
|
|
{ XFER_MW_DMA_1, 0x00221000, 0, },
|
|
|
|
{ XFER_MW_DMA_2, 0x00211000, 0, },
|
|
|
|
{ -1, 0, 0 }
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct pata_macio_timing pata_macio_kl33_timings[] = {
|
|
|
|
{ XFER_PIO_0, 0x00000526, 0, },
|
|
|
|
{ XFER_PIO_1, 0x00000085, 0, },
|
|
|
|
{ XFER_PIO_2, 0x00000025, 0, },
|
|
|
|
{ XFER_PIO_3, 0x00000025, 0, },
|
|
|
|
{ XFER_PIO_4, 0x00000025, 0, },
|
|
|
|
{ XFER_MW_DMA_0, 0x00084000, 0, },
|
|
|
|
{ XFER_MW_DMA_1, 0x00021800, 0, },
|
|
|
|
{ XFER_MW_DMA_2, 0x00011800, 0, },
|
|
|
|
{ -1, 0, 0 }
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct pata_macio_timing pata_macio_kl66_timings[] = {
|
|
|
|
{ XFER_PIO_0, 0x0000038c, 0, },
|
|
|
|
{ XFER_PIO_1, 0x0000020a, 0, },
|
|
|
|
{ XFER_PIO_2, 0x00000127, 0, },
|
|
|
|
{ XFER_PIO_3, 0x000000c6, 0, },
|
|
|
|
{ XFER_PIO_4, 0x00000065, 0, },
|
|
|
|
{ XFER_MW_DMA_0, 0x00084000, 0, },
|
|
|
|
{ XFER_MW_DMA_1, 0x00029800, 0, },
|
|
|
|
{ XFER_MW_DMA_2, 0x00019400, 0, },
|
|
|
|
{ XFER_UDMA_0, 0x19100000, 0, },
|
|
|
|
{ XFER_UDMA_1, 0x14d00000, 0, },
|
|
|
|
{ XFER_UDMA_2, 0x10900000, 0, },
|
|
|
|
{ XFER_UDMA_3, 0x0c700000, 0, },
|
|
|
|
{ XFER_UDMA_4, 0x0c500000, 0, },
|
|
|
|
{ -1, 0, 0 }
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct pata_macio_timing pata_macio_kauai_timings[] = {
|
|
|
|
{ XFER_PIO_0, 0x08000a92, 0, },
|
|
|
|
{ XFER_PIO_1, 0x0800060f, 0, },
|
|
|
|
{ XFER_PIO_2, 0x0800038b, 0, },
|
|
|
|
{ XFER_PIO_3, 0x05000249, 0, },
|
|
|
|
{ XFER_PIO_4, 0x04000148, 0, },
|
|
|
|
{ XFER_MW_DMA_0, 0x00618000, 0, },
|
|
|
|
{ XFER_MW_DMA_1, 0x00209000, 0, },
|
|
|
|
{ XFER_MW_DMA_2, 0x00148000, 0, },
|
|
|
|
{ XFER_UDMA_0, 0, 0x000070c1, },
|
|
|
|
{ XFER_UDMA_1, 0, 0x00005d81, },
|
|
|
|
{ XFER_UDMA_2, 0, 0x00004a61, },
|
|
|
|
{ XFER_UDMA_3, 0, 0x00003a51, },
|
|
|
|
{ XFER_UDMA_4, 0, 0x00002a31, },
|
|
|
|
{ XFER_UDMA_5, 0, 0x00002921, },
|
|
|
|
{ -1, 0, 0 }
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct pata_macio_timing pata_macio_shasta_timings[] = {
|
|
|
|
{ XFER_PIO_0, 0x0a000c97, 0, },
|
|
|
|
{ XFER_PIO_1, 0x07000712, 0, },
|
|
|
|
{ XFER_PIO_2, 0x040003cd, 0, },
|
|
|
|
{ XFER_PIO_3, 0x0500028b, 0, },
|
|
|
|
{ XFER_PIO_4, 0x0400010a, 0, },
|
|
|
|
{ XFER_MW_DMA_0, 0x00820800, 0, },
|
|
|
|
{ XFER_MW_DMA_1, 0x0028b000, 0, },
|
|
|
|
{ XFER_MW_DMA_2, 0x001ca000, 0, },
|
|
|
|
{ XFER_UDMA_0, 0, 0x00035901, },
|
|
|
|
{ XFER_UDMA_1, 0, 0x000348b1, },
|
|
|
|
{ XFER_UDMA_2, 0, 0x00033881, },
|
|
|
|
{ XFER_UDMA_3, 0, 0x00033861, },
|
|
|
|
{ XFER_UDMA_4, 0, 0x00033841, },
|
|
|
|
{ XFER_UDMA_5, 0, 0x00033031, },
|
|
|
|
{ XFER_UDMA_6, 0, 0x00033021, },
|
|
|
|
{ -1, 0, 0 }
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct pata_macio_timing *pata_macio_find_timing(
|
|
|
|
struct pata_macio_priv *priv,
|
|
|
|
int mode)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; priv->timings[i].mode > 0; i++) {
|
|
|
|
if (priv->timings[i].mode == mode)
|
|
|
|
return &priv->timings[i];
|
|
|
|
}
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static void pata_macio_apply_timings(struct ata_port *ap, unsigned int device)
|
|
|
|
{
|
|
|
|
struct pata_macio_priv *priv = ap->private_data;
|
|
|
|
void __iomem *rbase = ap->ioaddr.cmd_addr;
|
|
|
|
|
|
|
|
if (priv->kind == controller_sh_ata6 ||
|
|
|
|
priv->kind == controller_un_ata6 ||
|
|
|
|
priv->kind == controller_k2_ata6) {
|
|
|
|
writel(priv->treg[device][0], rbase + IDE_KAUAI_PIO_CONFIG);
|
|
|
|
writel(priv->treg[device][1], rbase + IDE_KAUAI_ULTRA_CONFIG);
|
|
|
|
} else
|
|
|
|
writel(priv->treg[device][0], rbase + IDE_TIMING_CONFIG);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void pata_macio_dev_select(struct ata_port *ap, unsigned int device)
|
|
|
|
{
|
|
|
|
ata_sff_dev_select(ap, device);
|
|
|
|
|
|
|
|
/* Apply timings */
|
|
|
|
pata_macio_apply_timings(ap, device);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void pata_macio_set_timings(struct ata_port *ap,
|
|
|
|
struct ata_device *adev)
|
|
|
|
{
|
|
|
|
struct pata_macio_priv *priv = ap->private_data;
|
|
|
|
const struct pata_macio_timing *t;
|
|
|
|
|
|
|
|
dev_dbg(priv->dev, "Set timings: DEV=%d,PIO=0x%x (%s),DMA=0x%x (%s)\n",
|
|
|
|
adev->devno,
|
|
|
|
adev->pio_mode,
|
|
|
|
ata_mode_string(ata_xfer_mode2mask(adev->pio_mode)),
|
|
|
|
adev->dma_mode,
|
|
|
|
ata_mode_string(ata_xfer_mode2mask(adev->dma_mode)));
|
|
|
|
|
|
|
|
/* First clear timings */
|
|
|
|
priv->treg[adev->devno][0] = priv->treg[adev->devno][1] = 0;
|
|
|
|
|
|
|
|
/* Now get the PIO timings */
|
|
|
|
t = pata_macio_find_timing(priv, adev->pio_mode);
|
|
|
|
if (t == NULL) {
|
|
|
|
dev_warn(priv->dev, "Invalid PIO timing requested: 0x%x\n",
|
|
|
|
adev->pio_mode);
|
|
|
|
t = pata_macio_find_timing(priv, XFER_PIO_0);
|
|
|
|
}
|
|
|
|
BUG_ON(t == NULL);
|
|
|
|
|
|
|
|
/* PIO timings only ever use the first treg */
|
|
|
|
priv->treg[adev->devno][0] |= t->reg1;
|
|
|
|
|
|
|
|
/* Now get DMA timings */
|
|
|
|
t = pata_macio_find_timing(priv, adev->dma_mode);
|
|
|
|
if (t == NULL || (t->reg1 == 0 && t->reg2 == 0)) {
|
|
|
|
dev_dbg(priv->dev, "DMA timing not set yet, using MW_DMA_0\n");
|
|
|
|
t = pata_macio_find_timing(priv, XFER_MW_DMA_0);
|
|
|
|
}
|
|
|
|
BUG_ON(t == NULL);
|
|
|
|
|
|
|
|
/* DMA timings can use both tregs */
|
|
|
|
priv->treg[adev->devno][0] |= t->reg1;
|
|
|
|
priv->treg[adev->devno][1] |= t->reg2;
|
|
|
|
|
|
|
|
dev_dbg(priv->dev, " -> %08x %08x\n",
|
|
|
|
priv->treg[adev->devno][0],
|
|
|
|
priv->treg[adev->devno][1]);
|
|
|
|
|
|
|
|
/* Apply to hardware */
|
|
|
|
pata_macio_apply_timings(ap, adev->devno);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Blast some well known "safe" values to the timing registers at init or
|
|
|
|
* wakeup from sleep time, before we do real calculation
|
|
|
|
*/
|
|
|
|
static void pata_macio_default_timings(struct pata_macio_priv *priv)
|
|
|
|
{
|
|
|
|
unsigned int value, value2 = 0;
|
|
|
|
|
|
|
|
switch(priv->kind) {
|
|
|
|
case controller_sh_ata6:
|
|
|
|
value = 0x0a820c97;
|
|
|
|
value2 = 0x00033031;
|
|
|
|
break;
|
|
|
|
case controller_un_ata6:
|
|
|
|
case controller_k2_ata6:
|
|
|
|
value = 0x08618a92;
|
|
|
|
value2 = 0x00002921;
|
|
|
|
break;
|
|
|
|
case controller_kl_ata4:
|
|
|
|
value = 0x0008438c;
|
|
|
|
break;
|
|
|
|
case controller_kl_ata3:
|
|
|
|
value = 0x00084526;
|
|
|
|
break;
|
|
|
|
case controller_heathrow:
|
|
|
|
case controller_ohare:
|
|
|
|
default:
|
|
|
|
value = 0x00074526;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
priv->treg[0][0] = priv->treg[1][0] = value;
|
|
|
|
priv->treg[0][1] = priv->treg[1][1] = value2;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int pata_macio_cable_detect(struct ata_port *ap)
|
|
|
|
{
|
|
|
|
struct pata_macio_priv *priv = ap->private_data;
|
|
|
|
|
|
|
|
/* Get cable type from device-tree */
|
|
|
|
if (priv->kind == controller_kl_ata4 ||
|
|
|
|
priv->kind == controller_un_ata6 ||
|
|
|
|
priv->kind == controller_k2_ata6 ||
|
|
|
|
priv->kind == controller_sh_ata6) {
|
|
|
|
const char* cable = of_get_property(priv->node, "cable-type",
|
|
|
|
NULL);
|
|
|
|
struct device_node *root = of_find_node_by_path("/");
|
|
|
|
const char *model = of_get_property(root, "model", NULL);
|
|
|
|
|
|
|
|
if (cable && !strncmp(cable, "80-", 3)) {
|
|
|
|
/* Some drives fail to detect 80c cable in PowerBook
|
|
|
|
* These machine use proprietary short IDE cable
|
|
|
|
* anyway
|
|
|
|
*/
|
|
|
|
if (!strncmp(model, "PowerBook", 9))
|
|
|
|
return ATA_CBL_PATA40_SHORT;
|
|
|
|
else
|
|
|
|
return ATA_CBL_PATA80;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* G5's seem to have incorrect cable type in device-tree.
|
|
|
|
* Let's assume they always have a 80 conductor cable, this seem to
|
|
|
|
* be always the case unless the user mucked around
|
|
|
|
*/
|
|
|
|
if (of_device_is_compatible(priv->node, "K2-UATA") ||
|
|
|
|
of_device_is_compatible(priv->node, "shasta-ata"))
|
|
|
|
return ATA_CBL_PATA80;
|
|
|
|
|
|
|
|
/* Anything else is 40 connectors */
|
|
|
|
return ATA_CBL_PATA40;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void pata_macio_qc_prep(struct ata_queued_cmd *qc)
|
|
|
|
{
|
|
|
|
unsigned int write = (qc->tf.flags & ATA_TFLAG_WRITE);
|
|
|
|
struct ata_port *ap = qc->ap;
|
|
|
|
struct pata_macio_priv *priv = ap->private_data;
|
|
|
|
struct scatterlist *sg;
|
|
|
|
struct dbdma_cmd *table;
|
|
|
|
unsigned int si, pi;
|
|
|
|
|
|
|
|
dev_dbgdma(priv->dev, "%s: qc %p flags %lx, write %d dev %d\n",
|
|
|
|
__func__, qc, qc->flags, write, qc->dev->devno);
|
|
|
|
|
|
|
|
if (!(qc->flags & ATA_QCFLAG_DMAMAP))
|
|
|
|
return;
|
|
|
|
|
|
|
|
table = (struct dbdma_cmd *) priv->dma_table_cpu;
|
|
|
|
|
|
|
|
pi = 0;
|
|
|
|
for_each_sg(qc->sg, sg, qc->n_elem, si) {
|
|
|
|
u32 addr, sg_len, len;
|
|
|
|
|
|
|
|
/* determine if physical DMA addr spans 64K boundary.
|
|
|
|
* Note h/w doesn't support 64-bit, so we unconditionally
|
|
|
|
* truncate dma_addr_t to u32.
|
|
|
|
*/
|
|
|
|
addr = (u32) sg_dma_address(sg);
|
|
|
|
sg_len = sg_dma_len(sg);
|
|
|
|
|
|
|
|
while (sg_len) {
|
|
|
|
/* table overflow should never happen */
|
|
|
|
BUG_ON (pi++ >= MAX_DCMDS);
|
|
|
|
|
|
|
|
len = (sg_len < MAX_DBDMA_SEG) ? sg_len : MAX_DBDMA_SEG;
|
2015-02-03 06:36:21 +01:00
|
|
|
table->command = cpu_to_le16(write ? OUTPUT_MORE: INPUT_MORE);
|
|
|
|
table->req_count = cpu_to_le16(len);
|
|
|
|
table->phy_addr = cpu_to_le32(addr);
|
2009-12-01 15:36:29 +01:00
|
|
|
table->cmd_dep = 0;
|
|
|
|
table->xfer_status = 0;
|
|
|
|
table->res_count = 0;
|
|
|
|
addr += len;
|
|
|
|
sg_len -= len;
|
|
|
|
++table;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Should never happen according to Tejun */
|
|
|
|
BUG_ON(!pi);
|
|
|
|
|
|
|
|
/* Convert the last command to an input/output */
|
|
|
|
table--;
|
2015-02-03 06:36:21 +01:00
|
|
|
table->command = cpu_to_le16(write ? OUTPUT_LAST: INPUT_LAST);
|
2009-12-01 15:36:29 +01:00
|
|
|
table++;
|
|
|
|
|
|
|
|
/* Add the stop command to the end of the list */
|
|
|
|
memset(table, 0, sizeof(struct dbdma_cmd));
|
2015-02-03 06:36:21 +01:00
|
|
|
table->command = cpu_to_le16(DBDMA_STOP);
|
2009-12-01 15:36:29 +01:00
|
|
|
|
|
|
|
dev_dbgdma(priv->dev, "%s: %d DMA list entries\n", __func__, pi);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static void pata_macio_freeze(struct ata_port *ap)
|
|
|
|
{
|
|
|
|
struct dbdma_regs __iomem *dma_regs = ap->ioaddr.bmdma_addr;
|
|
|
|
|
|
|
|
if (dma_regs) {
|
|
|
|
unsigned int timeout = 1000000;
|
|
|
|
|
|
|
|
/* Make sure DMA controller is stopped */
|
|
|
|
writel((RUN|PAUSE|FLUSH|WAKE|DEAD) << 16, &dma_regs->control);
|
|
|
|
while (--timeout && (readl(&dma_regs->status) & RUN))
|
|
|
|
udelay(1);
|
|
|
|
}
|
|
|
|
|
|
|
|
ata_sff_freeze(ap);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static void pata_macio_bmdma_setup(struct ata_queued_cmd *qc)
|
|
|
|
{
|
|
|
|
struct ata_port *ap = qc->ap;
|
|
|
|
struct pata_macio_priv *priv = ap->private_data;
|
|
|
|
struct dbdma_regs __iomem *dma_regs = ap->ioaddr.bmdma_addr;
|
|
|
|
int dev = qc->dev->devno;
|
|
|
|
|
|
|
|
dev_dbgdma(priv->dev, "%s: qc %p\n", __func__, qc);
|
|
|
|
|
|
|
|
/* Make sure DMA commands updates are visible */
|
|
|
|
writel(priv->dma_table_dma, &dma_regs->cmdptr);
|
|
|
|
|
|
|
|
/* On KeyLargo 66Mhz cell, we need to add 60ns to wrDataSetup on
|
|
|
|
* UDMA reads
|
|
|
|
*/
|
|
|
|
if (priv->kind == controller_kl_ata4 &&
|
|
|
|
(priv->treg[dev][0] & TR_66_UDMA_EN)) {
|
|
|
|
void __iomem *rbase = ap->ioaddr.cmd_addr;
|
|
|
|
u32 reg = priv->treg[dev][0];
|
|
|
|
|
|
|
|
if (!(qc->tf.flags & ATA_TFLAG_WRITE))
|
|
|
|
reg += 0x00800000;
|
|
|
|
writel(reg, rbase + IDE_TIMING_CONFIG);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* issue r/w command */
|
|
|
|
ap->ops->sff_exec_command(ap, &qc->tf);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void pata_macio_bmdma_start(struct ata_queued_cmd *qc)
|
|
|
|
{
|
|
|
|
struct ata_port *ap = qc->ap;
|
|
|
|
struct pata_macio_priv *priv = ap->private_data;
|
|
|
|
struct dbdma_regs __iomem *dma_regs = ap->ioaddr.bmdma_addr;
|
|
|
|
|
|
|
|
dev_dbgdma(priv->dev, "%s: qc %p\n", __func__, qc);
|
|
|
|
|
|
|
|
writel((RUN << 16) | RUN, &dma_regs->control);
|
|
|
|
/* Make sure it gets to the controller right now */
|
|
|
|
(void)readl(&dma_regs->control);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void pata_macio_bmdma_stop(struct ata_queued_cmd *qc)
|
|
|
|
{
|
|
|
|
struct ata_port *ap = qc->ap;
|
|
|
|
struct pata_macio_priv *priv = ap->private_data;
|
|
|
|
struct dbdma_regs __iomem *dma_regs = ap->ioaddr.bmdma_addr;
|
|
|
|
unsigned int timeout = 1000000;
|
|
|
|
|
|
|
|
dev_dbgdma(priv->dev, "%s: qc %p\n", __func__, qc);
|
|
|
|
|
|
|
|
/* Stop the DMA engine and wait for it to full halt */
|
|
|
|
writel (((RUN|WAKE|DEAD) << 16), &dma_regs->control);
|
|
|
|
while (--timeout && (readl(&dma_regs->status) & RUN))
|
|
|
|
udelay(1);
|
|
|
|
}
|
|
|
|
|
|
|
|
static u8 pata_macio_bmdma_status(struct ata_port *ap)
|
|
|
|
{
|
|
|
|
struct pata_macio_priv *priv = ap->private_data;
|
|
|
|
struct dbdma_regs __iomem *dma_regs = ap->ioaddr.bmdma_addr;
|
|
|
|
u32 dstat, rstat = ATA_DMA_INTR;
|
|
|
|
unsigned long timeout = 0;
|
|
|
|
|
|
|
|
dstat = readl(&dma_regs->status);
|
|
|
|
|
|
|
|
dev_dbgdma(priv->dev, "%s: dstat=%x\n", __func__, dstat);
|
|
|
|
|
|
|
|
/* We have two things to deal with here:
|
|
|
|
*
|
|
|
|
* - The dbdma won't stop if the command was started
|
|
|
|
* but completed with an error without transferring all
|
|
|
|
* datas. This happens when bad blocks are met during
|
|
|
|
* a multi-block transfer.
|
|
|
|
*
|
|
|
|
* - The dbdma fifo hasn't yet finished flushing to
|
|
|
|
* to system memory when the disk interrupt occurs.
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* First check for errors */
|
|
|
|
if ((dstat & (RUN|DEAD)) != RUN)
|
|
|
|
rstat |= ATA_DMA_ERR;
|
|
|
|
|
|
|
|
/* If ACTIVE is cleared, the STOP command has been hit and
|
|
|
|
* the transfer is complete. If not, we have to flush the
|
|
|
|
* channel.
|
|
|
|
*/
|
|
|
|
if ((dstat & ACTIVE) == 0)
|
|
|
|
return rstat;
|
|
|
|
|
|
|
|
dev_dbgdma(priv->dev, "%s: DMA still active, flushing...\n", __func__);
|
|
|
|
|
|
|
|
/* If dbdma didn't execute the STOP command yet, the
|
|
|
|
* active bit is still set. We consider that we aren't
|
|
|
|
* sharing interrupts (which is hopefully the case with
|
|
|
|
* those controllers) and so we just try to flush the
|
|
|
|
* channel for pending data in the fifo
|
|
|
|
*/
|
|
|
|
udelay(1);
|
|
|
|
writel((FLUSH << 16) | FLUSH, &dma_regs->control);
|
|
|
|
for (;;) {
|
|
|
|
udelay(1);
|
|
|
|
dstat = readl(&dma_regs->status);
|
|
|
|
if ((dstat & FLUSH) == 0)
|
|
|
|
break;
|
|
|
|
if (++timeout > 1000) {
|
|
|
|
dev_warn(priv->dev, "timeout flushing DMA\n");
|
|
|
|
rstat |= ATA_DMA_ERR;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return rstat;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* port_start is when we allocate the DMA command list */
|
|
|
|
static int pata_macio_port_start(struct ata_port *ap)
|
|
|
|
{
|
|
|
|
struct pata_macio_priv *priv = ap->private_data;
|
|
|
|
|
|
|
|
if (ap->ioaddr.bmdma_addr == NULL)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
/* Allocate space for the DBDMA commands.
|
|
|
|
*
|
|
|
|
* The +2 is +1 for the stop command and +1 to allow for
|
|
|
|
* aligning the start address to a multiple of 16 bytes.
|
|
|
|
*/
|
|
|
|
priv->dma_table_cpu =
|
|
|
|
dmam_alloc_coherent(priv->dev,
|
|
|
|
(MAX_DCMDS + 2) * sizeof(struct dbdma_cmd),
|
|
|
|
&priv->dma_table_dma, GFP_KERNEL);
|
|
|
|
if (priv->dma_table_cpu == NULL) {
|
|
|
|
dev_err(priv->dev, "Unable to allocate DMA command list\n");
|
|
|
|
ap->ioaddr.bmdma_addr = NULL;
|
libata-sff: clean up BMDMA initialization
When BMDMA initialization failed or BMDMA was not available for
whatever reason, bmdma_addr was left at zero and used as an indication
that BMDMA shouldn't be used. This leads to the following problems.
p1. For BMDMA drivers which don't use traditional BMDMA register,
ata_bmdma_mode_filter() incorrectly inhibits DMA modes. Those
drivers either have to inherit from ata_sff_port_ops or clear
->mode_filter explicitly.
p2. non-BMDMA drivers call into BMDMA PRD table allocation. It
doesn't actually allocate PRD table if bmdma_addr is not
initialized but is still confusing.
p3. For BMDMA drivers which don't use traditional BMDMA register, some
methods might not be invoked as expected (e.g. bmdma_stop from
ata_sff_post_internal_cmd()).
p4. SFF drivers w/ custom DMA interface implement noop BMDMA ops
worrying libata core might call into one of them.
These problems are caused by the muddy line between SFF and BMDMA and
the assumption that all BMDMA controllers initialize bmdma_addr.
This patch fixes p1 and p2 by removing the bmdma_addr assumption and
moving prd allocation to BMDMA port start. Later patches will fix the
remaining issues.
This patch improves BMDMA initialization such that
* When BMDMA register initialization fails, falls back to PIO instead
of failing. ata_pci_bmdma_init() never fails now.
* When ata_pci_bmdma_init() falls back to PIO, it clears
ap->mwdma_mask and udma_mask instead of depending on
ata_bmdma_mode_filter(). This makes ata_bmdma_mode_filter()
unnecessary thus resolving p1.
* ata_port_start() which actually is BMDMA specific is moved to
ata_bmdma_port_start(). ata_port_start() and ata_sff_port_start()
are killed.
* ata_sff_port_start32() is moved and renamed to
ata_bmdma_port_start32().
Drivers which no longer call into PRD table allocation are...
pdc_adma, sata_inic162x, sata_qstor, sata_sx4, pata_cmd640 and all
drivers which inherit from ata_sff_port_ops.
pata_icside sets ->port_start to ATA_OP_NULL as it doesn't need PRD
but is a BMDMA controller and doesn't have custom port_start like
other such controllers.
Note that with the previous patch which makes all and only BMDMA
drivers inherit from ata_bmdma_port_ops, this change doesn't break
drivers which need PRD table.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-05-10 21:41:34 +02:00
|
|
|
ap->mwdma_mask = 0;
|
|
|
|
ap->udma_mask = 0;
|
2009-12-01 15:36:29 +01:00
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void pata_macio_irq_clear(struct ata_port *ap)
|
|
|
|
{
|
|
|
|
struct pata_macio_priv *priv = ap->private_data;
|
|
|
|
|
|
|
|
/* Nothing to do here */
|
|
|
|
|
|
|
|
dev_dbgdma(priv->dev, "%s\n", __func__);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void pata_macio_reset_hw(struct pata_macio_priv *priv, int resume)
|
|
|
|
{
|
|
|
|
dev_dbg(priv->dev, "Enabling & resetting... \n");
|
|
|
|
|
|
|
|
if (priv->mediabay)
|
|
|
|
return;
|
|
|
|
|
|
|
|
if (priv->kind == controller_ohare && !resume) {
|
|
|
|
/* The code below is having trouble on some ohare machines
|
|
|
|
* (timing related ?). Until I can put my hand on one of these
|
|
|
|
* units, I keep the old way
|
|
|
|
*/
|
|
|
|
ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, priv->node, 0, 1);
|
|
|
|
} else {
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
/* Reset and enable controller */
|
|
|
|
rc = ppc_md.feature_call(PMAC_FTR_IDE_RESET,
|
|
|
|
priv->node, priv->aapl_bus_id, 1);
|
|
|
|
ppc_md.feature_call(PMAC_FTR_IDE_ENABLE,
|
|
|
|
priv->node, priv->aapl_bus_id, 1);
|
|
|
|
msleep(10);
|
|
|
|
/* Only bother waiting if there's a reset control */
|
|
|
|
if (rc == 0) {
|
|
|
|
ppc_md.feature_call(PMAC_FTR_IDE_RESET,
|
|
|
|
priv->node, priv->aapl_bus_id, 0);
|
|
|
|
msleep(IDE_WAKEUP_DELAY_MS);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* If resuming a PCI device, restore the config space here */
|
|
|
|
if (priv->pdev && resume) {
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
pci_restore_state(priv->pdev);
|
|
|
|
rc = pcim_enable_device(priv->pdev);
|
|
|
|
if (rc)
|
2011-04-16 00:51:58 +02:00
|
|
|
dev_err(&priv->pdev->dev,
|
|
|
|
"Failed to enable device after resume (%d)\n",
|
|
|
|
rc);
|
2009-12-01 15:36:29 +01:00
|
|
|
else
|
|
|
|
pci_set_master(priv->pdev);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* On Kauai, initialize the FCR. We don't perform a reset, doesn't really
|
|
|
|
* seem necessary and speeds up the boot process
|
|
|
|
*/
|
|
|
|
if (priv->kauai_fcr)
|
|
|
|
writel(KAUAI_FCR_UATA_MAGIC |
|
|
|
|
KAUAI_FCR_UATA_RESET_N |
|
|
|
|
KAUAI_FCR_UATA_ENABLE, priv->kauai_fcr);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Hook the standard slave config to fixup some HW related alignment
|
|
|
|
* restrictions
|
|
|
|
*/
|
|
|
|
static int pata_macio_slave_config(struct scsi_device *sdev)
|
|
|
|
{
|
|
|
|
struct ata_port *ap = ata_shost_to_port(sdev->host);
|
|
|
|
struct pata_macio_priv *priv = ap->private_data;
|
|
|
|
struct ata_device *dev;
|
|
|
|
u16 cmd;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
/* First call original */
|
|
|
|
rc = ata_scsi_slave_config(sdev);
|
|
|
|
if (rc)
|
|
|
|
return rc;
|
|
|
|
|
|
|
|
/* This is lifted from sata_nv */
|
|
|
|
dev = &ap->link.device[sdev->id];
|
|
|
|
|
|
|
|
/* OHare has issues with non cache aligned DMA on some chipsets */
|
|
|
|
if (priv->kind == controller_ohare) {
|
|
|
|
blk_queue_update_dma_alignment(sdev->request_queue, 31);
|
|
|
|
blk_queue_update_dma_pad(sdev->request_queue, 31);
|
|
|
|
|
|
|
|
/* Tell the world about it */
|
ata: Convert ata_<foo>_printk(KERN_<LEVEL> to ata_<foo>_<level>
Saves text by removing nearly duplicated text format strings by
creating ata_<foo>_printk functions and printf extension %pV.
ata defconfig size shrinks ~5% (~8KB), allyesconfig ~2.5% (~13KB)
Format string duplication comes from:
#define ata_link_printk(link, lv, fmt, args...) do { \
if (sata_pmp_attached((link)->ap) || (link)->ap->slave_link) \
printk("%sata%u.%02u: "fmt, lv, (link)->ap->print_id, \
(link)->pmp , ##args); \
else \
printk("%sata%u: "fmt, lv, (link)->ap->print_id , ##args); \
} while(0)
Coalesce long formats.
$ size drivers/ata/built-in.*
text data bss dec hex filename
544969 73893 116584 735446 b38d6 drivers/ata/built-in.allyesconfig.ata.o
558429 73893 117864 750186 b726a drivers/ata/built-in.allyesconfig.dev_level.o
141328 14689 4220 160237 271ed drivers/ata/built-in.defconfig.ata.o
149567 14689 4220 168476 2921c drivers/ata/built-in.defconfig.dev_level.o
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-04-16 00:51:59 +02:00
|
|
|
ata_dev_info(dev, "OHare alignment limits applied\n");
|
2009-12-01 15:36:29 +01:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* We only have issues with ATAPI */
|
|
|
|
if (dev->class != ATA_DEV_ATAPI)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
/* Shasta and K2 seem to have "issues" with reads ... */
|
|
|
|
if (priv->kind == controller_sh_ata6 || priv->kind == controller_k2_ata6) {
|
|
|
|
/* Allright these are bad, apply restrictions */
|
|
|
|
blk_queue_update_dma_alignment(sdev->request_queue, 15);
|
|
|
|
blk_queue_update_dma_pad(sdev->request_queue, 15);
|
|
|
|
|
|
|
|
/* We enable MWI and hack cache line size directly here, this
|
|
|
|
* is specific to this chipset and not normal values, we happen
|
|
|
|
* to somewhat know what we are doing here (which is basically
|
|
|
|
* to do the same Apple does and pray they did not get it wrong :-)
|
|
|
|
*/
|
|
|
|
BUG_ON(!priv->pdev);
|
|
|
|
pci_write_config_byte(priv->pdev, PCI_CACHE_LINE_SIZE, 0x08);
|
|
|
|
pci_read_config_word(priv->pdev, PCI_COMMAND, &cmd);
|
|
|
|
pci_write_config_word(priv->pdev, PCI_COMMAND,
|
|
|
|
cmd | PCI_COMMAND_INVALIDATE);
|
|
|
|
|
|
|
|
/* Tell the world about it */
|
ata: Convert ata_<foo>_printk(KERN_<LEVEL> to ata_<foo>_<level>
Saves text by removing nearly duplicated text format strings by
creating ata_<foo>_printk functions and printf extension %pV.
ata defconfig size shrinks ~5% (~8KB), allyesconfig ~2.5% (~13KB)
Format string duplication comes from:
#define ata_link_printk(link, lv, fmt, args...) do { \
if (sata_pmp_attached((link)->ap) || (link)->ap->slave_link) \
printk("%sata%u.%02u: "fmt, lv, (link)->ap->print_id, \
(link)->pmp , ##args); \
else \
printk("%sata%u: "fmt, lv, (link)->ap->print_id , ##args); \
} while(0)
Coalesce long formats.
$ size drivers/ata/built-in.*
text data bss dec hex filename
544969 73893 116584 735446 b38d6 drivers/ata/built-in.allyesconfig.ata.o
558429 73893 117864 750186 b726a drivers/ata/built-in.allyesconfig.dev_level.o
141328 14689 4220 160237 271ed drivers/ata/built-in.defconfig.ata.o
149567 14689 4220 168476 2921c drivers/ata/built-in.defconfig.dev_level.o
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-04-16 00:51:59 +02:00
|
|
|
ata_dev_info(dev, "K2/Shasta alignment limits applied\n");
|
2009-12-01 15:36:29 +01:00
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2014-05-07 17:17:44 +02:00
|
|
|
#ifdef CONFIG_PM_SLEEP
|
2009-12-01 15:36:29 +01:00
|
|
|
static int pata_macio_do_suspend(struct pata_macio_priv *priv, pm_message_t mesg)
|
|
|
|
{
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
/* First, core libata suspend to do most of the work */
|
|
|
|
rc = ata_host_suspend(priv->host, mesg);
|
|
|
|
if (rc)
|
|
|
|
return rc;
|
|
|
|
|
|
|
|
/* Restore to default timings */
|
|
|
|
pata_macio_default_timings(priv);
|
|
|
|
|
|
|
|
/* Mask interrupt. Not strictly necessary but old driver did
|
|
|
|
* it and I'd rather not change that here */
|
|
|
|
disable_irq(priv->irq);
|
|
|
|
|
|
|
|
/* The media bay will handle itself just fine */
|
|
|
|
if (priv->mediabay)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
/* Kauai has bus control FCRs directly here */
|
|
|
|
if (priv->kauai_fcr) {
|
|
|
|
u32 fcr = readl(priv->kauai_fcr);
|
|
|
|
fcr &= ~(KAUAI_FCR_UATA_RESET_N | KAUAI_FCR_UATA_ENABLE);
|
|
|
|
writel(fcr, priv->kauai_fcr);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* For PCI, save state and disable DMA. No need to call
|
|
|
|
* pci_set_power_state(), the HW doesn't do D states that
|
|
|
|
* way, the platform code will take care of suspending the
|
|
|
|
* ASIC properly
|
|
|
|
*/
|
|
|
|
if (priv->pdev) {
|
|
|
|
pci_save_state(priv->pdev);
|
|
|
|
pci_disable_device(priv->pdev);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Disable the bus on older machines and the cell on kauai */
|
|
|
|
ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, priv->node,
|
|
|
|
priv->aapl_bus_id, 0);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int pata_macio_do_resume(struct pata_macio_priv *priv)
|
|
|
|
{
|
|
|
|
/* Reset and re-enable the HW */
|
|
|
|
pata_macio_reset_hw(priv, 1);
|
|
|
|
|
|
|
|
/* Sanitize drive timings */
|
|
|
|
pata_macio_apply_timings(priv->host->ports[0], 0);
|
|
|
|
|
|
|
|
/* We want our IRQ back ! */
|
|
|
|
enable_irq(priv->irq);
|
|
|
|
|
|
|
|
/* Let the libata core take it from there */
|
|
|
|
ata_host_resume(priv->host);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
2014-05-07 17:17:44 +02:00
|
|
|
#endif /* CONFIG_PM_SLEEP */
|
2009-12-01 15:36:29 +01:00
|
|
|
|
|
|
|
static struct scsi_host_template pata_macio_sht = {
|
|
|
|
ATA_BASE_SHT(DRV_NAME),
|
|
|
|
.sg_tablesize = MAX_DCMDS,
|
|
|
|
/* We may not need that strict one */
|
|
|
|
.dma_boundary = ATA_DMA_BOUNDARY,
|
|
|
|
.slave_configure = pata_macio_slave_config,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct ata_port_operations pata_macio_ops = {
|
2010-05-10 21:41:33 +02:00
|
|
|
.inherits = &ata_bmdma_port_ops,
|
2009-12-01 15:36:29 +01:00
|
|
|
|
|
|
|
.freeze = pata_macio_freeze,
|
|
|
|
.set_piomode = pata_macio_set_timings,
|
|
|
|
.set_dmamode = pata_macio_set_timings,
|
|
|
|
.cable_detect = pata_macio_cable_detect,
|
|
|
|
.sff_dev_select = pata_macio_dev_select,
|
|
|
|
.qc_prep = pata_macio_qc_prep,
|
|
|
|
.bmdma_setup = pata_macio_bmdma_setup,
|
|
|
|
.bmdma_start = pata_macio_bmdma_start,
|
|
|
|
.bmdma_stop = pata_macio_bmdma_stop,
|
|
|
|
.bmdma_status = pata_macio_bmdma_status,
|
|
|
|
.port_start = pata_macio_port_start,
|
|
|
|
.sff_irq_clear = pata_macio_irq_clear,
|
|
|
|
};
|
|
|
|
|
2012-12-21 22:19:58 +01:00
|
|
|
static void pata_macio_invariants(struct pata_macio_priv *priv)
|
2009-12-01 15:36:29 +01:00
|
|
|
{
|
|
|
|
const int *bidp;
|
|
|
|
|
|
|
|
/* Identify the type of controller */
|
|
|
|
if (of_device_is_compatible(priv->node, "shasta-ata")) {
|
|
|
|
priv->kind = controller_sh_ata6;
|
|
|
|
priv->timings = pata_macio_shasta_timings;
|
|
|
|
} else if (of_device_is_compatible(priv->node, "kauai-ata")) {
|
|
|
|
priv->kind = controller_un_ata6;
|
|
|
|
priv->timings = pata_macio_kauai_timings;
|
|
|
|
} else if (of_device_is_compatible(priv->node, "K2-UATA")) {
|
|
|
|
priv->kind = controller_k2_ata6;
|
|
|
|
priv->timings = pata_macio_kauai_timings;
|
|
|
|
} else if (of_device_is_compatible(priv->node, "keylargo-ata")) {
|
|
|
|
if (strcmp(priv->node->name, "ata-4") == 0) {
|
|
|
|
priv->kind = controller_kl_ata4;
|
|
|
|
priv->timings = pata_macio_kl66_timings;
|
|
|
|
} else {
|
|
|
|
priv->kind = controller_kl_ata3;
|
|
|
|
priv->timings = pata_macio_kl33_timings;
|
|
|
|
}
|
|
|
|
} else if (of_device_is_compatible(priv->node, "heathrow-ata")) {
|
|
|
|
priv->kind = controller_heathrow;
|
|
|
|
priv->timings = pata_macio_heathrow_timings;
|
|
|
|
} else {
|
|
|
|
priv->kind = controller_ohare;
|
|
|
|
priv->timings = pata_macio_ohare_timings;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* XXX FIXME --- setup priv->mediabay here */
|
|
|
|
|
|
|
|
/* Get Apple bus ID (for clock and ASIC control) */
|
|
|
|
bidp = of_get_property(priv->node, "AAPL,bus-id", NULL);
|
|
|
|
priv->aapl_bus_id = bidp ? *bidp : 0;
|
|
|
|
|
|
|
|
/* Fixup missing Apple bus ID in case of media-bay */
|
|
|
|
if (priv->mediabay && bidp == 0)
|
|
|
|
priv->aapl_bus_id = 1;
|
|
|
|
}
|
|
|
|
|
2012-12-21 22:19:58 +01:00
|
|
|
static void pata_macio_setup_ios(struct ata_ioports *ioaddr,
|
|
|
|
void __iomem * base, void __iomem * dma)
|
2009-12-01 15:36:29 +01:00
|
|
|
{
|
|
|
|
/* cmd_addr is the base of regs for that port */
|
|
|
|
ioaddr->cmd_addr = base;
|
|
|
|
|
|
|
|
/* taskfile registers */
|
|
|
|
ioaddr->data_addr = base + (ATA_REG_DATA << 4);
|
|
|
|
ioaddr->error_addr = base + (ATA_REG_ERR << 4);
|
|
|
|
ioaddr->feature_addr = base + (ATA_REG_FEATURE << 4);
|
|
|
|
ioaddr->nsect_addr = base + (ATA_REG_NSECT << 4);
|
|
|
|
ioaddr->lbal_addr = base + (ATA_REG_LBAL << 4);
|
|
|
|
ioaddr->lbam_addr = base + (ATA_REG_LBAM << 4);
|
|
|
|
ioaddr->lbah_addr = base + (ATA_REG_LBAH << 4);
|
|
|
|
ioaddr->device_addr = base + (ATA_REG_DEVICE << 4);
|
|
|
|
ioaddr->status_addr = base + (ATA_REG_STATUS << 4);
|
|
|
|
ioaddr->command_addr = base + (ATA_REG_CMD << 4);
|
|
|
|
ioaddr->altstatus_addr = base + 0x160;
|
|
|
|
ioaddr->ctl_addr = base + 0x160;
|
|
|
|
ioaddr->bmdma_addr = dma;
|
|
|
|
}
|
|
|
|
|
2012-12-21 22:19:58 +01:00
|
|
|
static void pmac_macio_calc_timing_masks(struct pata_macio_priv *priv,
|
|
|
|
struct ata_port_info *pinfo)
|
2009-12-01 15:36:29 +01:00
|
|
|
{
|
|
|
|
int i = 0;
|
|
|
|
|
|
|
|
pinfo->pio_mask = 0;
|
|
|
|
pinfo->mwdma_mask = 0;
|
|
|
|
pinfo->udma_mask = 0;
|
|
|
|
|
|
|
|
while (priv->timings[i].mode > 0) {
|
|
|
|
unsigned int mask = 1U << (priv->timings[i].mode & 0x0f);
|
|
|
|
switch(priv->timings[i].mode & 0xf0) {
|
|
|
|
case 0x00: /* PIO */
|
|
|
|
pinfo->pio_mask |= (mask >> 8);
|
|
|
|
break;
|
|
|
|
case 0x20: /* MWDMA */
|
|
|
|
pinfo->mwdma_mask |= mask;
|
|
|
|
break;
|
|
|
|
case 0x40: /* UDMA */
|
|
|
|
pinfo->udma_mask |= mask;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
i++;
|
|
|
|
}
|
|
|
|
dev_dbg(priv->dev, "Supported masks: PIO=%lx, MWDMA=%lx, UDMA=%lx\n",
|
|
|
|
pinfo->pio_mask, pinfo->mwdma_mask, pinfo->udma_mask);
|
|
|
|
}
|
|
|
|
|
2012-12-21 22:19:58 +01:00
|
|
|
static int pata_macio_common_init(struct pata_macio_priv *priv,
|
|
|
|
resource_size_t tfregs,
|
|
|
|
resource_size_t dmaregs,
|
|
|
|
resource_size_t fcregs,
|
|
|
|
unsigned long irq)
|
2009-12-01 15:36:29 +01:00
|
|
|
{
|
|
|
|
struct ata_port_info pinfo;
|
|
|
|
const struct ata_port_info *ppi[] = { &pinfo, NULL };
|
|
|
|
void __iomem *dma_regs = NULL;
|
|
|
|
|
|
|
|
/* Fill up privates with various invariants collected from the
|
|
|
|
* device-tree
|
|
|
|
*/
|
|
|
|
pata_macio_invariants(priv);
|
|
|
|
|
|
|
|
/* Make sure we have sane initial timings in the cache */
|
|
|
|
pata_macio_default_timings(priv);
|
|
|
|
|
|
|
|
/* Not sure what the real max is but we know it's less than 64K, let's
|
|
|
|
* use 64K minus 256
|
|
|
|
*/
|
|
|
|
dma_set_max_seg_size(priv->dev, MAX_DBDMA_SEG);
|
|
|
|
|
|
|
|
/* Allocate libata host for 1 port */
|
|
|
|
memset(&pinfo, 0, sizeof(struct ata_port_info));
|
|
|
|
pmac_macio_calc_timing_masks(priv, &pinfo);
|
2011-02-04 20:05:48 +01:00
|
|
|
pinfo.flags = ATA_FLAG_SLAVE_POSS;
|
2009-12-01 15:36:29 +01:00
|
|
|
pinfo.port_ops = &pata_macio_ops;
|
|
|
|
pinfo.private_data = priv;
|
|
|
|
|
|
|
|
priv->host = ata_host_alloc_pinfo(priv->dev, ppi, 1);
|
|
|
|
if (priv->host == NULL) {
|
|
|
|
dev_err(priv->dev, "Failed to allocate ATA port structure\n");
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Setup the private data in host too */
|
|
|
|
priv->host->private_data = priv;
|
|
|
|
|
|
|
|
/* Map base registers */
|
|
|
|
priv->tfregs = devm_ioremap(priv->dev, tfregs, 0x100);
|
|
|
|
if (priv->tfregs == NULL) {
|
|
|
|
dev_err(priv->dev, "Failed to map ATA ports\n");
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
priv->host->iomap = &priv->tfregs;
|
|
|
|
|
|
|
|
/* Map DMA regs */
|
|
|
|
if (dmaregs != 0) {
|
|
|
|
dma_regs = devm_ioremap(priv->dev, dmaregs,
|
|
|
|
sizeof(struct dbdma_regs));
|
|
|
|
if (dma_regs == NULL)
|
|
|
|
dev_warn(priv->dev, "Failed to map ATA DMA registers\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
/* If chip has local feature control, map those regs too */
|
|
|
|
if (fcregs != 0) {
|
|
|
|
priv->kauai_fcr = devm_ioremap(priv->dev, fcregs, 4);
|
|
|
|
if (priv->kauai_fcr == NULL) {
|
|
|
|
dev_err(priv->dev, "Failed to map ATA FCR register\n");
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Setup port data structure */
|
|
|
|
pata_macio_setup_ios(&priv->host->ports[0]->ioaddr,
|
|
|
|
priv->tfregs, dma_regs);
|
|
|
|
priv->host->ports[0]->private_data = priv;
|
|
|
|
|
|
|
|
/* hard-reset the controller */
|
|
|
|
pata_macio_reset_hw(priv, 0);
|
|
|
|
pata_macio_apply_timings(priv->host->ports[0], 0);
|
|
|
|
|
|
|
|
/* Enable bus master if necessary */
|
|
|
|
if (priv->pdev && dma_regs)
|
|
|
|
pci_set_master(priv->pdev);
|
|
|
|
|
|
|
|
dev_info(priv->dev, "Activating pata-macio chipset %s, Apple bus ID %d\n",
|
|
|
|
macio_ata_names[priv->kind], priv->aapl_bus_id);
|
|
|
|
|
|
|
|
/* Start it up */
|
|
|
|
priv->irq = irq;
|
2010-05-19 22:10:21 +02:00
|
|
|
return ata_host_activate(priv->host, irq, ata_bmdma_interrupt, 0,
|
2009-12-01 15:36:29 +01:00
|
|
|
&pata_macio_sht);
|
|
|
|
}
|
|
|
|
|
2012-12-21 22:19:58 +01:00
|
|
|
static int pata_macio_attach(struct macio_dev *mdev,
|
|
|
|
const struct of_device_id *match)
|
2009-12-01 15:36:29 +01:00
|
|
|
{
|
|
|
|
struct pata_macio_priv *priv;
|
|
|
|
resource_size_t tfregs, dmaregs = 0;
|
|
|
|
unsigned long irq;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
/* Check for broken device-trees */
|
|
|
|
if (macio_resource_count(mdev) == 0) {
|
|
|
|
dev_err(&mdev->ofdev.dev,
|
|
|
|
"No addresses for controller\n");
|
|
|
|
return -ENXIO;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Enable managed resources */
|
|
|
|
macio_enable_devres(mdev);
|
|
|
|
|
|
|
|
/* Allocate and init private data structure */
|
|
|
|
priv = devm_kzalloc(&mdev->ofdev.dev,
|
|
|
|
sizeof(struct pata_macio_priv), GFP_KERNEL);
|
|
|
|
if (priv == NULL) {
|
|
|
|
dev_err(&mdev->ofdev.dev,
|
|
|
|
"Failed to allocate private memory\n");
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
2010-04-14 01:12:29 +02:00
|
|
|
priv->node = of_node_get(mdev->ofdev.dev.of_node);
|
2009-12-01 15:36:29 +01:00
|
|
|
priv->mdev = mdev;
|
|
|
|
priv->dev = &mdev->ofdev.dev;
|
|
|
|
|
|
|
|
/* Request memory resource for taskfile registers */
|
|
|
|
if (macio_request_resource(mdev, 0, "pata-macio")) {
|
|
|
|
dev_err(&mdev->ofdev.dev,
|
|
|
|
"Cannot obtain taskfile resource\n");
|
|
|
|
return -EBUSY;
|
|
|
|
}
|
|
|
|
tfregs = macio_resource_start(mdev, 0);
|
|
|
|
|
|
|
|
/* Request resources for DMA registers if any */
|
|
|
|
if (macio_resource_count(mdev) >= 2) {
|
|
|
|
if (macio_request_resource(mdev, 1, "pata-macio-dma"))
|
|
|
|
dev_err(&mdev->ofdev.dev,
|
|
|
|
"Cannot obtain DMA resource\n");
|
|
|
|
else
|
|
|
|
dmaregs = macio_resource_start(mdev, 1);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Fixup missing IRQ for some old implementations with broken
|
|
|
|
* device-trees.
|
|
|
|
*
|
|
|
|
* This is a bit bogus, it should be fixed in the device-tree itself,
|
|
|
|
* via the existing macio fixups, based on the type of interrupt
|
|
|
|
* controller in the machine. However, I have no test HW for this case,
|
|
|
|
* and this trick works well enough on those old machines...
|
|
|
|
*/
|
|
|
|
if (macio_irq_count(mdev) == 0) {
|
|
|
|
dev_warn(&mdev->ofdev.dev,
|
|
|
|
"No interrupts for controller, using 13\n");
|
|
|
|
irq = irq_create_mapping(NULL, 13);
|
|
|
|
} else
|
|
|
|
irq = macio_irq(mdev, 0);
|
|
|
|
|
|
|
|
/* Prevvent media bay callbacks until fully registered */
|
|
|
|
lock_media_bay(priv->mdev->media_bay);
|
|
|
|
|
|
|
|
/* Get register addresses and call common initialization */
|
|
|
|
rc = pata_macio_common_init(priv,
|
|
|
|
tfregs, /* Taskfile regs */
|
|
|
|
dmaregs, /* DBDMA regs */
|
|
|
|
0, /* Feature control */
|
|
|
|
irq);
|
|
|
|
unlock_media_bay(priv->mdev->media_bay);
|
|
|
|
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
2012-12-21 22:19:58 +01:00
|
|
|
static int pata_macio_detach(struct macio_dev *mdev)
|
2009-12-01 15:36:29 +01:00
|
|
|
{
|
|
|
|
struct ata_host *host = macio_get_drvdata(mdev);
|
|
|
|
struct pata_macio_priv *priv = host->private_data;
|
|
|
|
|
|
|
|
lock_media_bay(priv->mdev->media_bay);
|
|
|
|
|
|
|
|
/* Make sure the mediabay callback doesn't try to access
|
|
|
|
* dead stuff
|
|
|
|
*/
|
|
|
|
priv->host->private_data = NULL;
|
|
|
|
|
|
|
|
ata_host_detach(host);
|
|
|
|
|
|
|
|
unlock_media_bay(priv->mdev->media_bay);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2014-05-07 17:17:44 +02:00
|
|
|
#ifdef CONFIG_PM_SLEEP
|
2009-12-01 15:36:29 +01:00
|
|
|
static int pata_macio_suspend(struct macio_dev *mdev, pm_message_t mesg)
|
|
|
|
{
|
|
|
|
struct ata_host *host = macio_get_drvdata(mdev);
|
|
|
|
|
|
|
|
return pata_macio_do_suspend(host->private_data, mesg);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int pata_macio_resume(struct macio_dev *mdev)
|
|
|
|
{
|
|
|
|
struct ata_host *host = macio_get_drvdata(mdev);
|
|
|
|
|
|
|
|
return pata_macio_do_resume(host->private_data);
|
|
|
|
}
|
2014-05-07 17:17:44 +02:00
|
|
|
#endif /* CONFIG_PM_SLEEP */
|
2009-12-01 15:36:29 +01:00
|
|
|
|
|
|
|
#ifdef CONFIG_PMAC_MEDIABAY
|
|
|
|
static void pata_macio_mb_event(struct macio_dev* mdev, int mb_state)
|
|
|
|
{
|
|
|
|
struct ata_host *host = macio_get_drvdata(mdev);
|
|
|
|
struct ata_port *ap;
|
|
|
|
struct ata_eh_info *ehi;
|
|
|
|
struct ata_device *dev;
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
if (!host || !host->private_data)
|
|
|
|
return;
|
|
|
|
ap = host->ports[0];
|
|
|
|
spin_lock_irqsave(ap->lock, flags);
|
|
|
|
ehi = &ap->link.eh_info;
|
|
|
|
if (mb_state == MB_CD) {
|
|
|
|
ata_ehi_push_desc(ehi, "mediabay plug");
|
|
|
|
ata_ehi_hotplugged(ehi);
|
|
|
|
ata_port_freeze(ap);
|
|
|
|
} else {
|
|
|
|
ata_ehi_push_desc(ehi, "mediabay unplug");
|
|
|
|
ata_for_each_dev(dev, &ap->link, ALL)
|
|
|
|
dev->flags |= ATA_DFLAG_DETACH;
|
|
|
|
ata_port_abort(ap);
|
|
|
|
}
|
|
|
|
spin_unlock_irqrestore(ap->lock, flags);
|
|
|
|
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_PMAC_MEDIABAY */
|
|
|
|
|
|
|
|
|
2012-12-21 22:19:58 +01:00
|
|
|
static int pata_macio_pci_attach(struct pci_dev *pdev,
|
|
|
|
const struct pci_device_id *id)
|
2009-12-01 15:36:29 +01:00
|
|
|
{
|
|
|
|
struct pata_macio_priv *priv;
|
|
|
|
struct device_node *np;
|
|
|
|
resource_size_t rbase;
|
|
|
|
|
|
|
|
/* We cannot use a MacIO controller without its OF device node */
|
|
|
|
np = pci_device_to_OF_node(pdev);
|
|
|
|
if (np == NULL) {
|
|
|
|
dev_err(&pdev->dev,
|
|
|
|
"Cannot find OF device node for controller\n");
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Check that it can be enabled */
|
|
|
|
if (pcim_enable_device(pdev)) {
|
|
|
|
dev_err(&pdev->dev,
|
|
|
|
"Cannot enable controller PCI device\n");
|
|
|
|
return -ENXIO;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Allocate and init private data structure */
|
|
|
|
priv = devm_kzalloc(&pdev->dev,
|
|
|
|
sizeof(struct pata_macio_priv), GFP_KERNEL);
|
|
|
|
if (priv == NULL) {
|
|
|
|
dev_err(&pdev->dev,
|
|
|
|
"Failed to allocate private memory\n");
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
priv->node = of_node_get(np);
|
|
|
|
priv->pdev = pdev;
|
|
|
|
priv->dev = &pdev->dev;
|
|
|
|
|
|
|
|
/* Get MMIO regions */
|
|
|
|
if (pci_request_regions(pdev, "pata-macio")) {
|
|
|
|
dev_err(&pdev->dev,
|
|
|
|
"Cannot obtain PCI resources\n");
|
|
|
|
return -EBUSY;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Get register addresses and call common initialization */
|
|
|
|
rbase = pci_resource_start(pdev, 0);
|
|
|
|
if (pata_macio_common_init(priv,
|
|
|
|
rbase + 0x2000, /* Taskfile regs */
|
|
|
|
rbase + 0x1000, /* DBDMA regs */
|
|
|
|
rbase, /* Feature control */
|
|
|
|
pdev->irq))
|
|
|
|
return -ENXIO;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2012-12-21 22:19:58 +01:00
|
|
|
static void pata_macio_pci_detach(struct pci_dev *pdev)
|
2009-12-01 15:36:29 +01:00
|
|
|
{
|
2013-06-03 07:05:36 +02:00
|
|
|
struct ata_host *host = pci_get_drvdata(pdev);
|
2009-12-01 15:36:29 +01:00
|
|
|
|
|
|
|
ata_host_detach(host);
|
|
|
|
}
|
|
|
|
|
2014-05-07 17:17:44 +02:00
|
|
|
#ifdef CONFIG_PM_SLEEP
|
2009-12-01 15:36:29 +01:00
|
|
|
static int pata_macio_pci_suspend(struct pci_dev *pdev, pm_message_t mesg)
|
|
|
|
{
|
2013-06-03 07:05:36 +02:00
|
|
|
struct ata_host *host = pci_get_drvdata(pdev);
|
2009-12-01 15:36:29 +01:00
|
|
|
|
|
|
|
return pata_macio_do_suspend(host->private_data, mesg);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int pata_macio_pci_resume(struct pci_dev *pdev)
|
|
|
|
{
|
2013-06-03 07:05:36 +02:00
|
|
|
struct ata_host *host = pci_get_drvdata(pdev);
|
2009-12-01 15:36:29 +01:00
|
|
|
|
|
|
|
return pata_macio_do_resume(host->private_data);
|
|
|
|
}
|
2014-05-07 17:17:44 +02:00
|
|
|
#endif /* CONFIG_PM_SLEEP */
|
2009-12-01 15:36:29 +01:00
|
|
|
|
2017-03-01 20:33:28 +01:00
|
|
|
static const struct of_device_id pata_macio_match[] =
|
2009-12-01 15:36:29 +01:00
|
|
|
{
|
|
|
|
{
|
|
|
|
.name = "IDE",
|
|
|
|
},
|
|
|
|
{
|
|
|
|
.name = "ATA",
|
|
|
|
},
|
|
|
|
{
|
|
|
|
.type = "ide",
|
|
|
|
},
|
|
|
|
{
|
|
|
|
.type = "ata",
|
|
|
|
},
|
|
|
|
{},
|
|
|
|
};
|
2015-09-17 13:19:45 +02:00
|
|
|
MODULE_DEVICE_TABLE(of, pata_macio_match);
|
2009-12-01 15:36:29 +01:00
|
|
|
|
|
|
|
static struct macio_driver pata_macio_driver =
|
|
|
|
{
|
2010-06-02 09:09:18 +02:00
|
|
|
.driver = {
|
|
|
|
.name = "pata-macio",
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
.of_match_table = pata_macio_match,
|
|
|
|
},
|
2009-12-01 15:36:29 +01:00
|
|
|
.probe = pata_macio_attach,
|
|
|
|
.remove = pata_macio_detach,
|
2014-05-07 17:17:44 +02:00
|
|
|
#ifdef CONFIG_PM_SLEEP
|
2009-12-01 15:36:29 +01:00
|
|
|
.suspend = pata_macio_suspend,
|
|
|
|
.resume = pata_macio_resume,
|
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_PMAC_MEDIABAY
|
|
|
|
.mediabay_event = pata_macio_mb_event,
|
|
|
|
#endif
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct pci_device_id pata_macio_pci_match[] = {
|
|
|
|
{ PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_UNI_N_ATA), 0 },
|
|
|
|
{ PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_IPID_ATA100), 0 },
|
|
|
|
{ PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_K2_ATA100), 0 },
|
|
|
|
{ PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_SH_ATA), 0 },
|
|
|
|
{ PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_IPID2_ATA), 0 },
|
|
|
|
{},
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct pci_driver pata_macio_pci_driver = {
|
|
|
|
.name = "pata-pci-macio",
|
|
|
|
.id_table = pata_macio_pci_match,
|
|
|
|
.probe = pata_macio_pci_attach,
|
|
|
|
.remove = pata_macio_pci_detach,
|
2014-05-07 17:17:44 +02:00
|
|
|
#ifdef CONFIG_PM_SLEEP
|
2009-12-01 15:36:29 +01:00
|
|
|
.suspend = pata_macio_pci_suspend,
|
|
|
|
.resume = pata_macio_pci_resume,
|
|
|
|
#endif
|
|
|
|
.driver = {
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, pata_macio_pci_match);
|
|
|
|
|
|
|
|
|
|
|
|
static int __init pata_macio_init(void)
|
|
|
|
{
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
if (!machine_is(powermac))
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
rc = pci_register_driver(&pata_macio_pci_driver);
|
|
|
|
if (rc)
|
|
|
|
return rc;
|
|
|
|
rc = macio_register_driver(&pata_macio_driver);
|
|
|
|
if (rc) {
|
|
|
|
pci_unregister_driver(&pata_macio_pci_driver);
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __exit pata_macio_exit(void)
|
|
|
|
{
|
|
|
|
macio_unregister_driver(&pata_macio_driver);
|
|
|
|
pci_unregister_driver(&pata_macio_pci_driver);
|
|
|
|
}
|
|
|
|
|
|
|
|
module_init(pata_macio_init);
|
|
|
|
module_exit(pata_macio_exit);
|
|
|
|
|
|
|
|
MODULE_AUTHOR("Benjamin Herrenschmidt");
|
|
|
|
MODULE_DESCRIPTION("Apple MacIO PATA driver");
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
MODULE_VERSION(DRV_VERSION);
|