linux/arch/arm/mach-omap1/board-sx1.c

377 lines
9.0 KiB
C
Raw Normal View History

/*
* linux/arch/arm/mach-omap1/board-sx1.c
*
* Modified from board-generic.c
*
* Support for the Siemens SX1 mobile phone.
*
* Original version : Vladimir Ananiev (Vovan888-at-gmail com)
*
* Maintainters : Vladimir Ananiev (aka Vovan888), Sergge
* oslik.ru
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/input.h>
#include <linux/platform_device.h>
#include <linux/notifier.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/types.h>
#include <linux/i2c.h>
#include <linux/errno.h>
#include <linux/export.h>
#include <linux/omapfb.h>
#include <linux/platform_data/keypad-omap.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/flash.h>
#include <mach/mux.h>
ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h Based on earlier discussions[1] we attempted to find a suitable location for the omap DMA header in commit 2b6c4e73 (ARM: OMAP: DMA: Move plat/dma.h to plat-omap/dma-omap.h) until the conversion to dmaengine is complete. Unfortunately that was before I was able to try to test compile of the ARM multiplatform builds for omap2+, and the end result was not very good. So I'm creating yet another all over the place patch to cut the last dependency for building omap2+ for ARM multiplatform. After this, we have finally removed the driver dependencies to the arch/arm code, except for few drivers that are being worked on. The other option was to make the <plat-omap/dma-omap.h> path to work, but we'd have to add some new header directory to for multiplatform builds. Or we would have to manually include arch/arm/plat-omap/include again from arch/arm/Makefile for omap2+. Neither of these alternatives sound appealing as they will likely lead addition of various other headers exposed to the drivers, which we want to avoid for the multiplatform kernels. Since we already have a minimal include/linux/omap-dma.h, let's just use that instead and add a note to it to not use the custom omap DMA functions any longer where possible. Note that converting omap DMA to dmaengine depends on dmaengine supporting automatically incrementing the FIFO address at the device end, and converting all the remaining legacy drivers. So it's going to be few more merge windows. [1] https://patchwork.kernel.org/patch/1519591/# cc: Russell King <linux@arm.linux.org.uk> cc: Kevin Hilman <khilman@ti.com> cc: "Benoît Cousson" <b-cousson@ti.com> cc: Herbert Xu <herbert@gondor.apana.org.au> cc: "David S. Miller" <davem@davemloft.net> cc: Vinod Koul <vinod.koul@intel.com> cc: Dan Williams <djbw@fb.com> cc: Mauro Carvalho Chehab <mchehab@infradead.org> cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> cc: David Woodhouse <dwmw2@infradead.org> cc: Kyungmin Park <kyungmin.park@samsung.com> cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> cc: Tomi Valkeinen <tomi.valkeinen@ti.com> cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> cc: Hans Verkuil <hans.verkuil@cisco.com> cc: Vaibhav Hiremath <hvaibhav@ti.com> cc: Lokesh Vutla <lokeshvutla@ti.com> cc: Rusty Russell <rusty@rustcorp.com.au> cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> cc: Afzal Mohammed <afzal@ti.com> cc: linux-crypto@vger.kernel.org cc: linux-media@vger.kernel.org cc: linux-mtd@lists.infradead.org cc: linux-usb@vger.kernel.org cc: linux-fbdev@vger.kernel.org Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-11-30 17:41:50 +01:00
#include <linux/omap-dma.h>
#include <mach/tc.h>
#include <mach/board-sx1.h>
#include <mach/hardware.h>
#include <mach/usb.h>
#include "common.h"
/* Write to I2C device */
int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value)
{
struct i2c_adapter *adap;
int err;
struct i2c_msg msg[1];
unsigned char data[2];
adap = i2c_get_adapter(0);
if (!adap)
return -ENODEV;
msg->addr = devaddr; /* I2C address of chip */
msg->flags = 0;
msg->len = 2;
msg->buf = data;
data[0] = regoffset; /* register num */
data[1] = value; /* register data */
err = i2c_transfer(adap, msg, 1);
i2c_put_adapter(adap);
if (err >= 0)
return 0;
return err;
}
/* Read from I2C device */
int sx1_i2c_read_byte(u8 devaddr, u8 regoffset, u8 *value)
{
struct i2c_adapter *adap;
int err;
struct i2c_msg msg[1];
unsigned char data[2];
adap = i2c_get_adapter(0);
if (!adap)
return -ENODEV;
msg->addr = devaddr; /* I2C address of chip */
msg->flags = 0;
msg->len = 1;
msg->buf = data;
data[0] = regoffset; /* register num */
err = i2c_transfer(adap, msg, 1);
msg->addr = devaddr; /* I2C address */
msg->flags = I2C_M_RD;
msg->len = 1;
msg->buf = data;
err = i2c_transfer(adap, msg, 1);
*value = data[0];
i2c_put_adapter(adap);
if (err >= 0)
return 0;
return err;
}
/* set keyboard backlight intensity */
int sx1_setkeylight(u8 keylight)
{
if (keylight > SOFIA_MAX_LIGHT_VAL)
keylight = SOFIA_MAX_LIGHT_VAL;
return sx1_i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_KEYLIGHT_REG, keylight);
}
/* get current keylight intensity */
int sx1_getkeylight(u8 * keylight)
{
return sx1_i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_KEYLIGHT_REG, keylight);
}
/* set LCD backlight intensity */
int sx1_setbacklight(u8 backlight)
{
if (backlight > SOFIA_MAX_LIGHT_VAL)
backlight = SOFIA_MAX_LIGHT_VAL;
return sx1_i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_BACKLIGHT_REG,
backlight);
}
/* get current LCD backlight intensity */
int sx1_getbacklight (u8 * backlight)
{
return sx1_i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_BACKLIGHT_REG,
backlight);
}
/* set LCD backlight power on/off */
int sx1_setmmipower(u8 onoff)
{
int err;
u8 dat = 0;
err = sx1_i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, &dat);
if (err < 0)
return err;
if (onoff)
dat |= SOFIA_MMILIGHT_POWER;
else
dat &= ~SOFIA_MMILIGHT_POWER;
return sx1_i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, dat);
}
/* set USB power on/off */
int sx1_setusbpower(u8 onoff)
{
int err;
u8 dat = 0;
err = sx1_i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, &dat);
if (err < 0)
return err;
if (onoff)
dat |= SOFIA_USB_POWER;
else
dat &= ~SOFIA_USB_POWER;
return sx1_i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, dat);
}
EXPORT_SYMBOL(sx1_setkeylight);
EXPORT_SYMBOL(sx1_getkeylight);
EXPORT_SYMBOL(sx1_setbacklight);
EXPORT_SYMBOL(sx1_getbacklight);
EXPORT_SYMBOL(sx1_setmmipower);
EXPORT_SYMBOL(sx1_setusbpower);
/*----------- Keypad -------------------------*/
static const unsigned int sx1_keymap[] = {
KEY(3, 5, GROUP_0 | 117), /* camera Qt::Key_F17 */
KEY(4, 0, GROUP_0 | 114), /* voice memo Qt::Key_F14 */
KEY(4, 1, GROUP_2 | 114), /* voice memo */
KEY(4, 2, GROUP_3 | 114), /* voice memo */
KEY(0, 0, GROUP_1 | KEY_F12), /* red button Qt::Key_Hangup */
KEY(3, 4, GROUP_1 | KEY_LEFT),
KEY(3, 2, GROUP_1 | KEY_DOWN),
KEY(3, 1, GROUP_1 | KEY_RIGHT),
KEY(3, 0, GROUP_1 | KEY_UP),
KEY(3, 3, GROUP_1 | KEY_POWER), /* joystick press or Qt::Key_Select */
KEY(0, 5, GROUP_1 | KEY_1),
KEY(0, 4, GROUP_1 | KEY_2),
KEY(0, 3, GROUP_1 | KEY_3),
KEY(4, 3, GROUP_1 | KEY_4),
KEY(4, 4, GROUP_1 | KEY_5),
KEY(4, 5, GROUP_1 | KEY_KPASTERISK),/* "*" */
KEY(1, 4, GROUP_1 | KEY_6),
KEY(1, 5, GROUP_1 | KEY_7),
KEY(1, 3, GROUP_1 | KEY_8),
KEY(2, 3, GROUP_1 | KEY_9),
KEY(2, 5, GROUP_1 | KEY_0),
KEY(2, 4, GROUP_1 | 113), /* # F13 Toggle input method Qt::Key_F13 */
KEY(1, 0, GROUP_1 | KEY_F11), /* green button Qt::Key_Call */
KEY(2, 1, GROUP_1 | KEY_YEN), /* left soft Qt::Key_Context1 */
KEY(2, 2, GROUP_1 | KEY_F8), /* right soft Qt::Key_Back */
KEY(1, 2, GROUP_1 | KEY_LEFTSHIFT), /* shift */
KEY(1, 1, GROUP_1 | KEY_BACKSPACE), /* C (clear) */
KEY(2, 0, GROUP_1 | KEY_F7), /* menu Qt::Key_Menu */
};
static struct resource sx1_kp_resources[] = {
[0] = {
.start = INT_KEYBOARD,
.end = INT_KEYBOARD,
.flags = IORESOURCE_IRQ,
},
};
static const struct matrix_keymap_data sx1_keymap_data = {
.keymap = sx1_keymap,
.keymap_size = ARRAY_SIZE(sx1_keymap),
};
static struct omap_kp_platform_data sx1_kp_data = {
.rows = 6,
.cols = 6,
.keymap_data = &sx1_keymap_data,
.delay = 80,
};
static struct platform_device sx1_kp_device = {
.name = "omap-keypad",
.id = -1,
.dev = {
.platform_data = &sx1_kp_data,
},
.num_resources = ARRAY_SIZE(sx1_kp_resources),
.resource = sx1_kp_resources,
};
/*----------- MTD -------------------------*/
static struct mtd_partition sx1_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
{
.name = "bootloader",
.offset = 0x01800000,
.size = SZ_128K,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
/* bootloader params in the next sector */
{
.name = "params",
.offset = MTDPART_OFS_APPEND,
.size = SZ_128K,
.mask_flags = 0,
},
/* kernel */
{
.name = "kernel",
.offset = MTDPART_OFS_APPEND,
.size = SZ_2M - 2 * SZ_128K,
.mask_flags = 0
},
/* file system */
{
.name = "filesystem",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
.mask_flags = 0
}
};
static struct physmap_flash_data sx1_flash_data = {
.width = 2,
.set_vpp = omap1_set_vpp,
.parts = sx1_partitions,
.nr_parts = ARRAY_SIZE(sx1_partitions),
};
#ifdef CONFIG_SX1_OLD_FLASH
/* MTD Intel StrataFlash - old flashes */
static struct resource sx1_old_flash_resource[] = {
[0] = {
.start = OMAP_CS0_PHYS, /* Physical */
.end = OMAP_CS0_PHYS + SZ_16M - 1,,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = OMAP_CS1_PHYS,
.end = OMAP_CS1_PHYS + SZ_8M - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device sx1_flash_device = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &sx1_flash_data,
},
.num_resources = 2,
.resource = &sx1_old_flash_resource,
};
#else
/* MTD Intel 4000 flash - new flashes */
static struct resource sx1_new_flash_resource = {
.start = OMAP_CS0_PHYS,
.end = OMAP_CS0_PHYS + SZ_32M - 1,
.flags = IORESOURCE_MEM,
};
static struct platform_device sx1_flash_device = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &sx1_flash_data,
},
.num_resources = 1,
.resource = &sx1_new_flash_resource,
};
#endif
/*----------- USB -------------------------*/
static struct omap_usb_config sx1_usb_config __initdata = {
.otg = 0,
.register_dev = 1,
.register_host = 0,
.hmc_mode = 0,
.pins[0] = 2,
.pins[1] = 0,
.pins[2] = 0,
};
/*----------- LCD -------------------------*/
static struct omap_lcd_config sx1_lcd_config __initdata = {
.ctrl_name = "internal",
};
/*-----------------------------------------*/
static struct platform_device *sx1_devices[] __initdata = {
&sx1_flash_device,
&sx1_kp_device,
};
/*-----------------------------------------*/
static void __init omap_sx1_init(void)
{
/* mux pins for uarts */
omap_cfg_reg(UART1_TX);
omap_cfg_reg(UART1_RTS);
omap_cfg_reg(UART2_TX);
omap_cfg_reg(UART2_RTS);
omap_cfg_reg(UART3_TX);
omap_cfg_reg(UART3_RX);
platform_add_devices(sx1_devices, ARRAY_SIZE(sx1_devices));
omap_serial_init();
omap_register_i2c_bus(1, 100, NULL, 0);
omap1_usb_init(&sx1_usb_config);
sx1_mmc_init();
/* turn on USB power */
/* sx1_setusbpower(1); can't do it here because i2c is not ready */
gpio_request(1, "A_IRDA_OFF");
gpio_request(11, "A_SWITCH");
gpio_request(15, "A_USB_ON");
gpio_direction_output(1, 1); /*A_IRDA_OFF = 1 */
gpio_direction_output(11, 0); /*A_SWITCH = 0 */
gpio_direction_output(15, 0); /*A_USB_ON = 0 */
omapfb_set_lcd_config(&sx1_lcd_config);
}
MACHINE_START(SX1, "OMAP310 based Siemens SX1")
.atag_offset = 0x100,
.map_io = omap15xx_map_io,
.init_early = omap1_init_early,
.init_irq = omap1_init_irq,
.init_machine = omap_sx1_init,
.init_late = omap1_init_late,
.init_time = omap1_timer_init,
.restart = omap1_restart,
MACHINE_END