2006-09-28 20:29:01 +02:00
|
|
|
/*
|
|
|
|
* libata-acpi.c
|
|
|
|
* Provides ACPI support for PATA/SATA.
|
|
|
|
*
|
|
|
|
* Copyright (C) 2006 Intel Corp.
|
|
|
|
* Copyright (C) 2006 Randy Dunlap
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/ata.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/device.h>
|
|
|
|
#include <linux/errno.h>
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/acpi.h>
|
|
|
|
#include <linux/libata.h>
|
|
|
|
#include <linux/pci.h>
|
|
|
|
#include "libata.h"
|
|
|
|
|
|
|
|
#include <acpi/acpi_bus.h>
|
|
|
|
#include <acpi/acnames.h>
|
|
|
|
#include <acpi/acnamesp.h>
|
|
|
|
#include <acpi/acparser.h>
|
|
|
|
#include <acpi/acexcep.h>
|
|
|
|
#include <acpi/acmacros.h>
|
|
|
|
#include <acpi/actypes.h>
|
|
|
|
|
|
|
|
#define NO_PORT_MULT 0xffff
|
2007-05-14 20:28:16 +02:00
|
|
|
#define SATA_ADR(root,pmp) (((root) << 16) | (pmp))
|
2006-09-28 20:29:01 +02:00
|
|
|
|
|
|
|
#define REGS_PER_GTF 7
|
2007-05-14 20:28:16 +02:00
|
|
|
struct ata_acpi_gtf {
|
|
|
|
u8 tf[REGS_PER_GTF]; /* regs. 0x1f1 - 0x1f7 */
|
|
|
|
} __packed;
|
2006-09-28 20:29:01 +02:00
|
|
|
|
2007-03-09 00:13:50 +01:00
|
|
|
/*
|
|
|
|
* Helper - belongs in the PCI layer somewhere eventually
|
|
|
|
*/
|
|
|
|
static int is_pci_dev(struct device *dev)
|
|
|
|
{
|
|
|
|
return (dev->bus == &pci_bus_type);
|
|
|
|
}
|
2006-09-28 20:29:01 +02:00
|
|
|
|
2007-05-14 20:28:16 +02:00
|
|
|
static void ata_acpi_associate_sata_port(struct ata_port *ap)
|
2006-09-28 20:29:01 +02:00
|
|
|
{
|
2007-05-14 20:28:16 +02:00
|
|
|
acpi_integer adr = SATA_ADR(ap->port_no, NO_PORT_MULT);
|
|
|
|
|
|
|
|
ap->device->acpi_handle = acpi_get_child(ap->host->acpi_handle, adr);
|
2006-09-28 20:29:01 +02:00
|
|
|
}
|
|
|
|
|
2007-05-14 20:28:16 +02:00
|
|
|
static void ata_acpi_associate_ide_port(struct ata_port *ap)
|
2006-09-28 20:29:01 +02:00
|
|
|
{
|
2007-05-14 20:28:16 +02:00
|
|
|
int max_devices, i;
|
2006-09-28 20:29:01 +02:00
|
|
|
|
2007-05-14 20:28:16 +02:00
|
|
|
ap->acpi_handle = acpi_get_child(ap->host->acpi_handle, ap->port_no);
|
|
|
|
if (!ap->acpi_handle)
|
|
|
|
return;
|
2006-09-28 20:29:01 +02:00
|
|
|
|
2007-05-14 20:28:16 +02:00
|
|
|
max_devices = 1;
|
|
|
|
if (ap->flags & ATA_FLAG_SLAVE_POSS)
|
|
|
|
max_devices++;
|
2006-09-28 20:29:01 +02:00
|
|
|
|
2007-05-14 20:28:16 +02:00
|
|
|
for (i = 0; i < max_devices; i++) {
|
|
|
|
struct ata_device *dev = &ap->device[i];
|
2006-09-28 20:29:01 +02:00
|
|
|
|
2007-05-14 20:28:16 +02:00
|
|
|
dev->acpi_handle = acpi_get_child(ap->acpi_handle, i);
|
2006-09-28 20:29:01 +02:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2007-05-14 20:28:16 +02:00
|
|
|
/**
|
|
|
|
* ata_acpi_associate - associate ATA host with ACPI objects
|
|
|
|
* @host: target ATA host
|
|
|
|
*
|
|
|
|
* Look up ACPI objects associated with @host and initialize
|
|
|
|
* acpi_handle fields of @host, its ports and devices accordingly.
|
|
|
|
*
|
|
|
|
* LOCKING:
|
|
|
|
* EH context.
|
|
|
|
*
|
|
|
|
* RETURNS:
|
|
|
|
* 0 on success, -errno on failure.
|
|
|
|
*/
|
|
|
|
void ata_acpi_associate(struct ata_host *host)
|
2006-09-28 20:29:01 +02:00
|
|
|
{
|
2007-05-14 20:28:16 +02:00
|
|
|
int i;
|
2006-09-28 20:29:01 +02:00
|
|
|
|
2007-05-14 20:28:16 +02:00
|
|
|
if (!is_pci_dev(host->dev) || libata_noacpi)
|
|
|
|
return;
|
2006-09-28 20:29:01 +02:00
|
|
|
|
2007-05-14 20:28:16 +02:00
|
|
|
host->acpi_handle = DEVICE_ACPI_HANDLE(host->dev);
|
|
|
|
if (!host->acpi_handle)
|
|
|
|
return;
|
2006-09-28 20:29:01 +02:00
|
|
|
|
2007-05-14 20:28:16 +02:00
|
|
|
for (i = 0; i < host->n_ports; i++) {
|
|
|
|
struct ata_port *ap = host->ports[i];
|
|
|
|
|
|
|
|
if (host->ports[0]->flags & ATA_FLAG_ACPI_SATA)
|
|
|
|
ata_acpi_associate_sata_port(ap);
|
|
|
|
else
|
|
|
|
ata_acpi_associate_ide_port(ap);
|
2006-09-28 20:29:01 +02:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
2007-05-14 20:28:16 +02:00
|
|
|
* ata_dev_get_GTF - get the drive bootup default taskfile settings
|
2007-05-05 16:50:38 +02:00
|
|
|
* @dev: target ATA device
|
2007-05-14 20:28:16 +02:00
|
|
|
* @gtf: output parameter for buffer containing _GTF taskfile arrays
|
|
|
|
* @ptr_to_free: pointer which should be freed
|
2006-09-28 20:29:01 +02:00
|
|
|
*
|
|
|
|
* This applies to both PATA and SATA drives.
|
|
|
|
*
|
|
|
|
* The _GTF method has no input parameters.
|
|
|
|
* It returns a variable number of register set values (registers
|
|
|
|
* hex 1F1..1F7, taskfiles).
|
|
|
|
* The <variable number> is not known in advance, so have ACPI-CA
|
|
|
|
* allocate the buffer as needed and return it, then free it later.
|
|
|
|
*
|
2007-05-14 20:28:16 +02:00
|
|
|
* LOCKING:
|
|
|
|
* EH context.
|
|
|
|
*
|
|
|
|
* RETURNS:
|
|
|
|
* Number of taskfiles on success, 0 if _GTF doesn't exist or doesn't
|
|
|
|
* contain valid data. -errno on other errors.
|
2006-09-28 20:29:01 +02:00
|
|
|
*/
|
2007-05-14 20:28:16 +02:00
|
|
|
static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf,
|
|
|
|
void **ptr_to_free)
|
2006-09-28 20:29:01 +02:00
|
|
|
{
|
2007-05-05 16:50:38 +02:00
|
|
|
struct ata_port *ap = dev->ap;
|
|
|
|
acpi_status status;
|
|
|
|
struct acpi_buffer output;
|
|
|
|
union acpi_object *out_obj;
|
2007-05-14 20:28:16 +02:00
|
|
|
int rc = 0;
|
2006-09-28 20:29:01 +02:00
|
|
|
|
2007-05-14 20:28:16 +02:00
|
|
|
/* set up output buffer */
|
|
|
|
output.length = ACPI_ALLOCATE_BUFFER;
|
|
|
|
output.pointer = NULL; /* ACPI-CA sets this; save/free it later */
|
2006-09-28 20:29:01 +02:00
|
|
|
|
2007-05-14 20:28:16 +02:00
|
|
|
if (!dev->acpi_handle)
|
2007-05-14 20:28:16 +02:00
|
|
|
goto out_free;
|
2006-09-28 20:29:01 +02:00
|
|
|
|
|
|
|
if (ata_msg_probe(ap))
|
2007-05-05 16:50:38 +02:00
|
|
|
ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER: port#: %d\n",
|
2007-02-21 08:36:33 +01:00
|
|
|
__FUNCTION__, ap->port_no);
|
2006-09-28 20:29:01 +02:00
|
|
|
|
2007-05-05 16:50:38 +02:00
|
|
|
if (!ata_dev_enabled(dev) || (ap->flags & ATA_FLAG_DISABLED)) {
|
2006-09-28 20:29:01 +02:00
|
|
|
if (ata_msg_probe(ap))
|
2007-05-05 16:50:38 +02:00
|
|
|
ata_dev_printk(dev, KERN_DEBUG, "%s: ERR: "
|
2006-09-28 20:29:01 +02:00
|
|
|
"ata_dev_present: %d, PORT_DISABLED: %lu\n",
|
2007-05-05 16:50:38 +02:00
|
|
|
__FUNCTION__, ata_dev_enabled(dev),
|
2006-09-28 20:29:01 +02:00
|
|
|
ap->flags & ATA_FLAG_DISABLED);
|
2007-05-14 20:28:16 +02:00
|
|
|
goto out_free;
|
2006-09-28 20:29:01 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
/* _GTF has no input parameters */
|
2007-05-14 20:28:16 +02:00
|
|
|
status = acpi_evaluate_object(dev->acpi_handle, "_GTF", NULL, &output);
|
|
|
|
|
2006-09-28 20:29:01 +02:00
|
|
|
if (ACPI_FAILURE(status)) {
|
2007-05-14 20:28:16 +02:00
|
|
|
if (status != AE_NOT_FOUND) {
|
|
|
|
ata_dev_printk(dev, KERN_WARNING,
|
|
|
|
"_GTF evaluation failed (AE 0x%x)\n",
|
|
|
|
status);
|
|
|
|
rc = -EIO;
|
|
|
|
}
|
|
|
|
goto out_free;
|
2006-09-28 20:29:01 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
if (!output.length || !output.pointer) {
|
|
|
|
if (ata_msg_probe(ap))
|
2007-05-05 16:50:38 +02:00
|
|
|
ata_dev_printk(dev, KERN_DEBUG, "%s: Run _GTF: "
|
2006-09-28 20:29:01 +02:00
|
|
|
"length or ptr is NULL (0x%llx, 0x%p)\n",
|
|
|
|
__FUNCTION__,
|
|
|
|
(unsigned long long)output.length,
|
|
|
|
output.pointer);
|
2007-05-14 20:28:16 +02:00
|
|
|
goto out_free;
|
2006-09-28 20:29:01 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
out_obj = output.pointer;
|
|
|
|
if (out_obj->type != ACPI_TYPE_BUFFER) {
|
|
|
|
if (ata_msg_probe(ap))
|
2007-05-05 16:50:38 +02:00
|
|
|
ata_dev_printk(dev, KERN_DEBUG, "%s: Run _GTF: "
|
2006-09-28 20:29:01 +02:00
|
|
|
"error: expected object type of "
|
|
|
|
" ACPI_TYPE_BUFFER, got 0x%x\n",
|
|
|
|
__FUNCTION__, out_obj->type);
|
2007-05-14 20:28:16 +02:00
|
|
|
rc = -EINVAL;
|
|
|
|
goto out_free;
|
2006-09-28 20:29:01 +02:00
|
|
|
}
|
|
|
|
|
2007-05-14 20:28:16 +02:00
|
|
|
if (out_obj->buffer.length % REGS_PER_GTF) {
|
2006-09-28 20:29:01 +02:00
|
|
|
if (ata_msg_drv(ap))
|
2007-05-05 16:50:38 +02:00
|
|
|
ata_dev_printk(dev, KERN_ERR,
|
2006-09-28 20:29:01 +02:00
|
|
|
"%s: unexpected GTF length (%d) or addr (0x%p)\n",
|
|
|
|
__FUNCTION__, out_obj->buffer.length,
|
|
|
|
out_obj->buffer.pointer);
|
2007-05-14 20:28:16 +02:00
|
|
|
rc = -EINVAL;
|
|
|
|
goto out_free;
|
2006-09-28 20:29:01 +02:00
|
|
|
}
|
|
|
|
|
2007-05-14 20:28:16 +02:00
|
|
|
*ptr_to_free = out_obj;
|
|
|
|
*gtf = (void *)out_obj->buffer.pointer;
|
|
|
|
rc = out_obj->buffer.length / REGS_PER_GTF;
|
|
|
|
|
2006-09-28 20:29:01 +02:00
|
|
|
if (ata_msg_probe(ap))
|
2007-05-05 16:50:38 +02:00
|
|
|
ata_dev_printk(dev, KERN_DEBUG, "%s: returning "
|
2007-05-14 20:28:16 +02:00
|
|
|
"gtf=%p, gtf_count=%d, ptr_to_free=%p\n",
|
|
|
|
__FUNCTION__, *gtf, rc, *ptr_to_free);
|
|
|
|
return rc;
|
|
|
|
|
|
|
|
out_free:
|
|
|
|
kfree(output.pointer);
|
|
|
|
return rc;
|
2006-09-28 20:29:01 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* taskfile_load_raw - send taskfile registers to host controller
|
2007-05-05 16:50:38 +02:00
|
|
|
* @dev: target ATA device
|
2006-09-28 20:29:01 +02:00
|
|
|
* @gtf: raw ATA taskfile register set (0x1f1 - 0x1f7)
|
|
|
|
*
|
|
|
|
* Outputs ATA taskfile to standard ATA host controller using MMIO
|
|
|
|
* or PIO as indicated by the ATA_FLAG_MMIO flag.
|
|
|
|
* Writes the control, feature, nsect, lbal, lbam, and lbah registers.
|
|
|
|
* Optionally (ATA_TFLAG_LBA48) writes hob_feature, hob_nsect,
|
|
|
|
* hob_lbal, hob_lbam, and hob_lbah.
|
|
|
|
*
|
|
|
|
* This function waits for idle (!BUSY and !DRQ) after writing
|
|
|
|
* registers. If the control register has a new value, this
|
|
|
|
* function also waits for idle after writing control and before
|
|
|
|
* writing the remaining registers.
|
|
|
|
*
|
2007-05-14 20:28:16 +02:00
|
|
|
* LOCKING:
|
|
|
|
* EH context.
|
|
|
|
*
|
|
|
|
* RETURNS:
|
|
|
|
* 0 on success, -errno on failure.
|
2006-09-28 20:29:01 +02:00
|
|
|
*/
|
2007-05-14 20:28:16 +02:00
|
|
|
static int taskfile_load_raw(struct ata_device *dev,
|
|
|
|
const struct ata_acpi_gtf *gtf)
|
2006-09-28 20:29:01 +02:00
|
|
|
{
|
2007-05-05 16:50:38 +02:00
|
|
|
struct ata_port *ap = dev->ap;
|
2007-05-14 20:28:16 +02:00
|
|
|
struct ata_taskfile tf, rtf;
|
|
|
|
unsigned int err_mask;
|
2007-02-25 03:05:01 +01:00
|
|
|
|
2007-05-14 20:28:16 +02:00
|
|
|
if ((gtf->tf[0] == 0) && (gtf->tf[1] == 0) && (gtf->tf[2] == 0)
|
|
|
|
&& (gtf->tf[3] == 0) && (gtf->tf[4] == 0) && (gtf->tf[5] == 0)
|
|
|
|
&& (gtf->tf[6] == 0))
|
|
|
|
return 0;
|
2006-09-28 20:29:01 +02:00
|
|
|
|
2007-05-05 16:50:38 +02:00
|
|
|
ata_tf_init(dev, &tf);
|
2007-02-25 03:05:01 +01:00
|
|
|
|
|
|
|
/* convert gtf to tf */
|
|
|
|
tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; /* TBD */
|
2007-04-22 19:06:46 +02:00
|
|
|
tf.protocol = ATA_PROT_NODATA;
|
2007-05-14 20:28:16 +02:00
|
|
|
tf.feature = gtf->tf[0]; /* 0x1f1 */
|
|
|
|
tf.nsect = gtf->tf[1]; /* 0x1f2 */
|
|
|
|
tf.lbal = gtf->tf[2]; /* 0x1f3 */
|
|
|
|
tf.lbam = gtf->tf[3]; /* 0x1f4 */
|
|
|
|
tf.lbah = gtf->tf[4]; /* 0x1f5 */
|
|
|
|
tf.device = gtf->tf[5]; /* 0x1f6 */
|
|
|
|
tf.command = gtf->tf[6]; /* 0x1f7 */
|
|
|
|
|
|
|
|
if (ata_msg_probe(ap))
|
|
|
|
ata_dev_printk(dev, KERN_DEBUG, "executing ACPI cmd "
|
|
|
|
"%02x/%02x:%02x:%02x:%02x:%02x:%02x\n",
|
|
|
|
tf.command, tf.feature, tf.nsect,
|
|
|
|
tf.lbal, tf.lbam, tf.lbah, tf.device);
|
|
|
|
|
|
|
|
rtf = tf;
|
|
|
|
err_mask = ata_exec_internal(dev, &rtf, NULL, DMA_NONE, NULL, 0);
|
|
|
|
if (err_mask) {
|
2007-05-05 16:50:38 +02:00
|
|
|
ata_dev_printk(dev, KERN_ERR,
|
2007-05-14 20:28:16 +02:00
|
|
|
"ACPI cmd %02x/%02x:%02x:%02x:%02x:%02x:%02x failed "
|
|
|
|
"(Emask=0x%x Stat=0x%02x Err=0x%02x)\n",
|
|
|
|
tf.command, tf.feature, tf.nsect, tf.lbal, tf.lbam,
|
|
|
|
tf.lbah, tf.device, err_mask, rtf.command, rtf.feature);
|
|
|
|
return -EIO;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
2006-09-28 20:29:01 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
2007-05-14 20:28:16 +02:00
|
|
|
* ata_dev_set_taskfiles - write the drive taskfile settings from _GTF
|
2007-05-05 16:50:38 +02:00
|
|
|
* @dev: target ATA device
|
2007-05-14 20:28:16 +02:00
|
|
|
* @gtf: pointer to array of _GTF taskfiles to execute
|
|
|
|
* @gtf_count: number of taskfiles
|
2006-09-28 20:29:01 +02:00
|
|
|
*
|
|
|
|
* This applies to both PATA and SATA drives.
|
|
|
|
*
|
2007-05-14 20:28:16 +02:00
|
|
|
* Execute taskfiles in @gtf.
|
|
|
|
*
|
|
|
|
* LOCKING:
|
|
|
|
* EH context.
|
|
|
|
*
|
|
|
|
* RETURNS:
|
|
|
|
* 0 on success, -errno on failure.
|
2006-09-28 20:29:01 +02:00
|
|
|
*/
|
2007-05-14 20:28:16 +02:00
|
|
|
static int ata_dev_set_taskfiles(struct ata_device *dev,
|
|
|
|
struct ata_acpi_gtf *gtf, int gtf_count)
|
2006-09-28 20:29:01 +02:00
|
|
|
{
|
2007-05-05 16:50:38 +02:00
|
|
|
struct ata_port *ap = dev->ap;
|
|
|
|
int ix;
|
2006-09-28 20:29:01 +02:00
|
|
|
|
|
|
|
if (ata_msg_probe(ap))
|
2007-05-05 16:50:38 +02:00
|
|
|
ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER: port#: %d\n",
|
2007-02-21 08:36:33 +01:00
|
|
|
__FUNCTION__, ap->port_no);
|
2006-09-28 20:29:01 +02:00
|
|
|
|
2007-05-14 20:28:16 +02:00
|
|
|
if (!(ap->flags & ATA_FLAG_ACPI_SATA))
|
2006-09-28 20:29:01 +02:00
|
|
|
return 0;
|
|
|
|
|
2007-05-05 16:50:38 +02:00
|
|
|
if (!ata_dev_enabled(dev) || (ap->flags & ATA_FLAG_DISABLED))
|
2007-05-14 20:28:16 +02:00
|
|
|
return -ENODEV;
|
2006-09-28 20:29:01 +02:00
|
|
|
|
2007-05-14 20:28:16 +02:00
|
|
|
/* send all TaskFile registers (0x1f1-0x1f7) *in*that*order* */
|
|
|
|
for (ix = 0; ix < gtf_count; ix++)
|
|
|
|
taskfile_load_raw(dev, gtf++);
|
2006-09-28 20:29:01 +02:00
|
|
|
|
2007-05-14 20:28:16 +02:00
|
|
|
return 0;
|
2006-09-28 20:29:01 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* ata_acpi_exec_tfs - get then write drive taskfile settings
|
|
|
|
* @ap: the ata_port for the drive
|
|
|
|
*
|
|
|
|
* This applies to both PATA and SATA drives.
|
|
|
|
*/
|
|
|
|
int ata_acpi_exec_tfs(struct ata_port *ap)
|
|
|
|
{
|
2007-05-14 20:28:16 +02:00
|
|
|
int ix, ret = 0;
|
2006-09-28 20:29:01 +02:00
|
|
|
|
2007-03-10 00:15:33 +01:00
|
|
|
/*
|
|
|
|
* TBD - implement PATA support. For now,
|
|
|
|
* we should not run GTF on PATA devices since some
|
|
|
|
* PATA require execution of GTM/STM before GTF.
|
|
|
|
*/
|
2007-05-14 20:28:15 +02:00
|
|
|
if (!(ap->flags & ATA_FLAG_ACPI_SATA))
|
2007-03-10 00:15:33 +01:00
|
|
|
return 0;
|
2006-09-28 20:29:01 +02:00
|
|
|
|
|
|
|
for (ix = 0; ix < ATA_MAX_DEVICES; ix++) {
|
2007-05-05 16:50:38 +02:00
|
|
|
struct ata_device *dev = &ap->device[ix];
|
2007-05-14 20:28:16 +02:00
|
|
|
struct ata_acpi_gtf *gtf = NULL;
|
|
|
|
int gtf_count;
|
|
|
|
void *ptr_to_free = NULL;
|
2007-05-05 16:50:38 +02:00
|
|
|
|
|
|
|
if (!ata_dev_enabled(dev))
|
2006-09-28 20:29:01 +02:00
|
|
|
continue;
|
|
|
|
|
2007-05-14 20:28:16 +02:00
|
|
|
ret = ata_dev_get_GTF(dev, >f, &ptr_to_free);
|
|
|
|
if (ret == 0)
|
|
|
|
continue;
|
2006-09-28 20:29:01 +02:00
|
|
|
if (ret < 0) {
|
|
|
|
if (ata_msg_probe(ap))
|
|
|
|
ata_port_printk(ap, KERN_DEBUG,
|
|
|
|
"%s: get_GTF error (%d)\n",
|
|
|
|
__FUNCTION__, ret);
|
|
|
|
break;
|
|
|
|
}
|
2007-05-14 20:28:16 +02:00
|
|
|
gtf_count = ret;
|
2006-09-28 20:29:01 +02:00
|
|
|
|
2007-05-14 20:28:16 +02:00
|
|
|
ret = ata_dev_set_taskfiles(dev, gtf, gtf_count);
|
|
|
|
kfree(ptr_to_free);
|
2006-09-28 20:29:01 +02:00
|
|
|
if (ret < 0) {
|
|
|
|
if (ata_msg_probe(ap))
|
|
|
|
ata_port_printk(ap, KERN_DEBUG,
|
|
|
|
"%s: set_taskfiles error (%d)\n",
|
|
|
|
__FUNCTION__, ret);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2006-09-28 20:29:12 +02:00
|
|
|
/**
|
|
|
|
* ata_acpi_push_id - send Identify data to drive
|
2007-05-05 16:50:38 +02:00
|
|
|
* @dev: target ATA device
|
2006-09-28 20:29:12 +02:00
|
|
|
*
|
|
|
|
* _SDD ACPI object: for SATA mode only
|
|
|
|
* Must be after Identify (Packet) Device -- uses its data
|
|
|
|
* ATM this function never returns a failure. It is an optional
|
|
|
|
* method and if it fails for whatever reason, we should still
|
|
|
|
* just keep going.
|
|
|
|
*/
|
2007-05-05 16:50:38 +02:00
|
|
|
int ata_acpi_push_id(struct ata_device *dev)
|
2006-09-28 20:29:12 +02:00
|
|
|
{
|
2007-05-05 16:50:38 +02:00
|
|
|
struct ata_port *ap = dev->ap;
|
|
|
|
int err;
|
|
|
|
acpi_status status;
|
|
|
|
struct acpi_object_list input;
|
|
|
|
union acpi_object in_params[1];
|
2006-09-28 20:29:12 +02:00
|
|
|
|
2007-05-14 20:28:16 +02:00
|
|
|
if (!dev->acpi_handle)
|
2006-09-28 20:29:12 +02:00
|
|
|
return 0;
|
|
|
|
|
|
|
|
if (ata_msg_probe(ap))
|
2007-05-05 16:50:38 +02:00
|
|
|
ata_dev_printk(dev, KERN_DEBUG, "%s: ix = %d, port#: %d\n",
|
|
|
|
__FUNCTION__, dev->devno, ap->port_no);
|
2006-09-28 20:29:12 +02:00
|
|
|
|
|
|
|
/* Don't continue if not a SATA device. */
|
2007-05-14 20:28:15 +02:00
|
|
|
if (!(ap->flags & ATA_FLAG_ACPI_SATA)) {
|
2006-09-28 20:29:12 +02:00
|
|
|
if (ata_msg_probe(ap))
|
2007-05-05 16:50:38 +02:00
|
|
|
ata_dev_printk(dev, KERN_DEBUG,
|
2006-09-28 20:29:12 +02:00
|
|
|
"%s: Not a SATA device\n", __FUNCTION__);
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Give the drive Identify data to the drive via the _SDD method */
|
|
|
|
/* _SDD: set up input parameters */
|
|
|
|
input.count = 1;
|
|
|
|
input.pointer = in_params;
|
|
|
|
in_params[0].type = ACPI_TYPE_BUFFER;
|
2007-05-05 16:50:38 +02:00
|
|
|
in_params[0].buffer.length = sizeof(dev->id[0]) * ATA_ID_WORDS;
|
|
|
|
in_params[0].buffer.pointer = (u8 *)dev->id;
|
2006-09-28 20:29:12 +02:00
|
|
|
/* Output buffer: _SDD has no output */
|
|
|
|
|
|
|
|
/* It's OK for _SDD to be missing too. */
|
2007-05-05 16:50:38 +02:00
|
|
|
swap_buf_le16(dev->id, ATA_ID_WORDS);
|
2007-05-14 20:28:16 +02:00
|
|
|
status = acpi_evaluate_object(dev->acpi_handle, "_SDD", &input, NULL);
|
2007-05-05 16:50:38 +02:00
|
|
|
swap_buf_le16(dev->id, ATA_ID_WORDS);
|
2006-09-28 20:29:12 +02:00
|
|
|
|
|
|
|
err = ACPI_FAILURE(status) ? -EIO : 0;
|
|
|
|
if (err < 0) {
|
|
|
|
if (ata_msg_probe(ap))
|
2007-05-05 16:50:38 +02:00
|
|
|
ata_dev_printk(dev, KERN_DEBUG,
|
2007-02-21 08:36:33 +01:00
|
|
|
"%s _SDD error: status = 0x%x\n",
|
|
|
|
__FUNCTION__, status);
|
2006-09-28 20:29:12 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
/* always return success */
|
|
|
|
out:
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
|