OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
linux/arch/arm/kernel/debug.S

158 lines
2.6 KiB
ArmAsm
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
/*
* linux/arch/arm/kernel/debug.S
*
* Copyright (C) 1994-1999 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* 32-bit debugging code
*/
#include <linux/linkage.h>
ARM: create a common IOMEM definition Several platforms create IOMEM defines for casting to 'void __iomem *', and other platforms are incorrectly using __io() macro for the same purpose. This creates a common definition and removes all the platform specific versions. Rather than try to make linux/io.h and asm/io.h assembly safe, the assembly version of IOMEM is moved into asm/assembler.h. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: David Brown <davidb@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Shawn Guo <shawn.guo@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Paul Walmsley <paul@pwsan.com> Acked-by: Viresh Kumar <viresh.kumar@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Colin Cross <ccross@android.com> Cc: Olof Johansson <olof@lixom.net> Cc: Stephen Warren <swarren@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-03-10 17:30:31 +01:00
#include <asm/assembler.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
.text
/*
* Some debugging routines (useful if you've got MM problems and
* printk isn't working). For DEBUGGING ONLY!!! Do not leave
* references to these in a production kernel!
*/
ARM: move debug macros to common location Based on suggestion by Russell King, create a common location for debug macros and select the included debug macro file using config option. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk>
2012-08-31 07:03:46 +02:00
#if !defined(CONFIG_DEBUG_SEMIHOSTING)
#include CONFIG_DEBUG_LL_INCLUDE
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
arm: return both physical and virtual addresses from addruart Rather than checking the MMU status in every instance of addruart, do it once in kernel/debug.S, and change the existing addruart macros to return both physical and virtual addresses. The main debug code can then select the appropriate address to use. This will also allow us to retreive the address of a uart for the MMU state that we're not current in. Updated with fixes for OMAP from Jason Wang <jason77.wang@gmail.com> and Tony Lindgren <tony@atomide.com>, and fix for versatile express from Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-07-06 12:30:06 +02:00
#ifdef CONFIG_MMU
.macro addruart_current, rx, tmp1, tmp2
ARM: add an extra temp register to the low level debugging addruart macro Some platforms (like OMAP not to name it) are doing rather complicated hacks just to determine the base UART address to use. Let's give their addruart macro some slack by providing an extra work register which will allow for much needed cleanups. This is basically a no-op as this commit is only adding the extra argument to the macro but no one is using it yet. Signed-off-by: nicolas Pitre <nicolas.pitre@linaro.org> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-09-01 04:55:46 +02:00
addruart \tmp1, \tmp2, \rx
arm: return both physical and virtual addresses from addruart Rather than checking the MMU status in every instance of addruart, do it once in kernel/debug.S, and change the existing addruart macros to return both physical and virtual addresses. The main debug code can then select the appropriate address to use. This will also allow us to retreive the address of a uart for the MMU state that we're not current in. Updated with fixes for OMAP from Jason Wang <jason77.wang@gmail.com> and Tony Lindgren <tony@atomide.com>, and fix for versatile express from Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-07-06 12:30:06 +02:00
mrc p15, 0, \rx, c1, c0
tst \rx, #1
moveq \rx, \tmp1
movne \rx, \tmp2
.endm
#else /* !CONFIG_MMU */
.macro addruart_current, rx, tmp1, tmp2
ARM: unify MMU/!MMU addruart calls Remove the needless differences between MMU/!MMU addruart calls. This allows to use the same addruart macro on SoC level. Useful for SoC consisting of multiple CPUs with and without MMU such as Freescale Vybrid. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-20 00:03:50 +02:00
addruart \rx, \tmp1, \tmp2
arm: return both physical and virtual addresses from addruart Rather than checking the MMU status in every instance of addruart, do it once in kernel/debug.S, and change the existing addruart macros to return both physical and virtual addresses. The main debug code can then select the appropriate address to use. This will also allow us to retreive the address of a uart for the MMU state that we're not current in. Updated with fixes for OMAP from Jason Wang <jason77.wang@gmail.com> and Tony Lindgren <tony@atomide.com>, and fix for versatile express from Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-07-06 12:30:06 +02:00
.endm
#endif /* CONFIG_MMU */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
/*
* Useful debugging routines
*/
ENTRY(printhex8)
mov r1, #8
b printhex
[ARM] 5227/1: Add the ENDPROC declarations to the .S files This declaration specifies the "function" type and size for various assembly functions, mainly needed for generating the correct branch instructions in Thumb-2. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-28 12:22:32 +02:00
ENDPROC(printhex8)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
ENTRY(printhex4)
mov r1, #4
b printhex
[ARM] 5227/1: Add the ENDPROC declarations to the .S files This declaration specifies the "function" type and size for various assembly functions, mainly needed for generating the correct branch instructions in Thumb-2. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-28 12:22:32 +02:00
ENDPROC(printhex4)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
ENTRY(printhex2)
mov r1, #2
ARM: 8703/1: debug.S: move hexbuf to a writable section This was located in .text which is meant to be read-only. And in the XIP case this shortcut simply doesn't work and may trigger a Flash controller mode switch and crash the kernel. Move it to the .bss area. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-10-06 20:36:58 +02:00
printhex: adr r2, hexbuf_rel
ldr r3, [r2]
add r2, r2, r3
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
add r3, r2, r1
mov r1, #0
strb r1, [r3]
1: and r1, r0, #15
mov r0, r0, lsr #4
cmp r1, #10
addlt r1, r1, #'0'
addge r1, r1, #'a' - 10
strb r1, [r3, #-1]!
teq r3, r2
bne 1b
mov r0, r2
b printascii
[ARM] 5227/1: Add the ENDPROC declarations to the .S files This declaration specifies the "function" type and size for various assembly functions, mainly needed for generating the correct branch instructions in Thumb-2. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-28 12:22:32 +02:00
ENDPROC(printhex2)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
ARM: 8703/1: debug.S: move hexbuf to a writable section This was located in .text which is meant to be read-only. And in the XIP case this shortcut simply doesn't work and may trigger a Flash controller mode switch and crash the kernel. Move it to the .bss area. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-10-06 20:36:58 +02:00
.pushsection .bss
hexbuf_addr: .space 16
.popsection
.align
hexbuf_rel: .long hexbuf_addr - .
ARM: 7137/1: Fix error upon adding LL debug Upon adding new board LL debug support, if the resultant code addition would not cause PC relative offset of "hexbuf" from "adr r2, hexbuf" (+2) instruction to be representable in a shifted 8-bit value (hence indirectly putting higher aligment requirement on larger offsets), following error occurs, arch/arm/kernel/debug.S: Assembler messages: arch/arm/kernel/debug.S:138: Error: invalid constant (428) after fixup Fix it by bringing "hexbuf" closer so that "adr" can have the offset. Signed-off-by: Afzal Mohammed <afzal@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-20 20:32:07 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
.ltorg
ARM: 7338/1: add support for early console output via semihosting This is a very simple method for code running in an emulator, or under the supervision of a debugger, to use I/O facilities on the controlling host. Tested with OpenOCD, and ARM's Fast Models. Details on semihosting can be found in chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-22 21:58:03 +01:00
#ifndef CONFIG_DEBUG_SEMIHOSTING
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
ENTRY(printascii)
arm: return both physical and virtual addresses from addruart Rather than checking the MMU status in every instance of addruart, do it once in kernel/debug.S, and change the existing addruart macros to return both physical and virtual addresses. The main debug code can then select the appropriate address to use. This will also allow us to retreive the address of a uart for the MMU state that we're not current in. Updated with fixes for OMAP from Jason Wang <jason77.wang@gmail.com> and Tony Lindgren <tony@atomide.com>, and fix for versatile express from Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-07-06 12:30:06 +02:00
addruart_current r3, r1, r2
ARM: 8717/2: debug printch/printascii: translate '\n' to "\r\n" not "\n\r" Some terminals apparently have issues with "\n\r" and mess up the display. Let's use the traditional "\r\n" ordering. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reported-by: Chris Brandt <Chris.Brandt@renesas.com> Tested-by: Chris Brandt <Chris.Brandt@renesas.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-11-02 21:58:41 +01:00
1: teq r0, #0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
ldrneb r1, [r0], #1
teqne r1, #0
ARM: 8717/2: debug printch/printascii: translate '\n' to "\r\n" not "\n\r" Some terminals apparently have issues with "\n\r" and mess up the display. Let's use the traditional "\r\n" ordering. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reported-by: Chris Brandt <Chris.Brandt@renesas.com> Tested-by: Chris Brandt <Chris.Brandt@renesas.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-11-02 21:58:41 +01:00
reteq lr
2: teq r1, #'\n'
bne 3f
mov r1, #'\r'
waituart r2, r3
senduart r1, r3
busyuart r2, r3
mov r1, #'\n'
3: waituart r2, r3
senduart r1, r3
busyuart r2, r3
b 1b
[ARM] 5227/1: Add the ENDPROC declarations to the .S files This declaration specifies the "function" type and size for various assembly functions, mainly needed for generating the correct branch instructions in Thumb-2. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-28 12:22:32 +02:00
ENDPROC(printascii)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
ENTRY(printch)
arm: return both physical and virtual addresses from addruart Rather than checking the MMU status in every instance of addruart, do it once in kernel/debug.S, and change the existing addruart macros to return both physical and virtual addresses. The main debug code can then select the appropriate address to use. This will also allow us to retreive the address of a uart for the MMU state that we're not current in. Updated with fixes for OMAP from Jason Wang <jason77.wang@gmail.com> and Tony Lindgren <tony@atomide.com>, and fix for versatile express from Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-07-06 12:30:06 +02:00
addruart_current r3, r1, r2
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
mov r1, r0
mov r0, #0
ARM: 8717/2: debug printch/printascii: translate '\n' to "\r\n" not "\n\r" Some terminals apparently have issues with "\n\r" and mess up the display. Let's use the traditional "\r\n" ordering. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reported-by: Chris Brandt <Chris.Brandt@renesas.com> Tested-by: Chris Brandt <Chris.Brandt@renesas.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-11-02 21:58:41 +01:00
b 2b
[ARM] 5227/1: Add the ENDPROC declarations to the .S files This declaration specifies the "function" type and size for various assembly functions, mainly needed for generating the correct branch instructions in Thumb-2. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-28 12:22:32 +02:00
ENDPROC(printch)
ARM: 7338/1: add support for early console output via semihosting This is a very simple method for code running in an emulator, or under the supervision of a debugger, to use I/O facilities on the controlling host. Tested with OpenOCD, and ARM's Fast Models. Details on semihosting can be found in chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-22 21:58:03 +01:00
ARM: compile fix for DEBUG_LL=y && MMU=n debug_ll_addr is only used on machines with an MMU so it can be #ifdef'ed out safely. This fixes: arch/arm/kernel/debug.S: Assembler messages: arch/arm/kernel/debug.S:104: Error: too many positional arguments The problem was introduced in e5c5f2a ARM: implement debug_ll_io_init(). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Stephen Warren <swarren@nvidia.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-16 15:32:06 +01:00
#ifdef CONFIG_MMU
ARM: implement debug_ll_io_init() When using DEBUG_LL, the UART's (or other HW's) registers are mapped into early page tables based on the results of assembly macro addruart. Later, when the page tables are replaced, the same virtual address must remain valid. Historically, this has been ensured by using defines from <mach/iomap.h> in both the implementation of addruart, and the machine's .map_io() function. However, with the move to single zImage, we wish to remove <mach/iomap.h>. To enable this, the macro addruart may be used when constructing the late page tables too; addruart is exposed as a C function debug_ll_addr(), and used to set up the required mapping in debug_ll_io_init(), which may called on an opt-in basis from a machine's .map_io() function. Signed-off-by: Rob Herring <rob.herring@calxeda.com> [swarren: Mask map.virtual with PAGE_MASK. Checked for NULL results from debug_ll_addr (e.g. when selected UART isn't valid). Fixed compile when either !CONFIG_DEBUG_LL or CONFIG_DEBUG_SEMIHOSTING.] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-10-22 19:42:54 +02:00
ENTRY(debug_ll_addr)
addruart r2, r3, ip
str r2, [r0]
str r3, [r1]
ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ ARMv6 and greater introduced a new instruction ("bx") which can be used to return from function calls. Recent CPUs perform better when the "bx lr" instruction is used rather than the "mov pc, lr" instruction, and this sequence is strongly recommended to be used by the ARM architecture manual (section A.4.1.1). We provide a new macro "ret" with all its variants for the condition code which will resolve to the appropriate instruction. Rather than doing this piecemeal, and miss some instances, change all the "mov pc" instances to use the new macro, with the exception of the "movs" instruction and the kprobes code. This allows us to detect the "mov pc, lr" case and fix it up - and also gives us the possibility of deploying this for other registers depending on the CPU selection. Reported-by: Will Deacon <will.deacon@arm.com> Tested-by: Stephen Warren <swarren@nvidia.com> # Tegra Jetson TK1 Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> # mioa701_bootresume.S Tested-by: Andrew Lunn <andrew@lunn.ch> # Kirkwood Tested-by: Shawn Guo <shawn.guo@freescale.com> Tested-by: Tony Lindgren <tony@atomide.com> # OMAPs Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> # Armada XP, 375, 385 Acked-by: Sekhar Nori <nsekhar@ti.com> # DaVinci Acked-by: Christoffer Dall <christoffer.dall@linaro.org> # kvm/hyp Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> # PXA3xx Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> # Xen Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> # ARMv7M Tested-by: Simon Horman <horms+renesas@verge.net.au> # Shmobile Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-30 17:29:12 +02:00
ret lr
ARM: implement debug_ll_io_init() When using DEBUG_LL, the UART's (or other HW's) registers are mapped into early page tables based on the results of assembly macro addruart. Later, when the page tables are replaced, the same virtual address must remain valid. Historically, this has been ensured by using defines from <mach/iomap.h> in both the implementation of addruart, and the machine's .map_io() function. However, with the move to single zImage, we wish to remove <mach/iomap.h>. To enable this, the macro addruart may be used when constructing the late page tables too; addruart is exposed as a C function debug_ll_addr(), and used to set up the required mapping in debug_ll_io_init(), which may called on an opt-in basis from a machine's .map_io() function. Signed-off-by: Rob Herring <rob.herring@calxeda.com> [swarren: Mask map.virtual with PAGE_MASK. Checked for NULL results from debug_ll_addr (e.g. when selected UART isn't valid). Fixed compile when either !CONFIG_DEBUG_LL or CONFIG_DEBUG_SEMIHOSTING.] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-10-22 19:42:54 +02:00
ENDPROC(debug_ll_addr)
ARM: compile fix for DEBUG_LL=y && MMU=n debug_ll_addr is only used on machines with an MMU so it can be #ifdef'ed out safely. This fixes: arch/arm/kernel/debug.S: Assembler messages: arch/arm/kernel/debug.S:104: Error: too many positional arguments The problem was introduced in e5c5f2a ARM: implement debug_ll_io_init(). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Stephen Warren <swarren@nvidia.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-16 15:32:06 +01:00
#endif
ARM: implement debug_ll_io_init() When using DEBUG_LL, the UART's (or other HW's) registers are mapped into early page tables based on the results of assembly macro addruart. Later, when the page tables are replaced, the same virtual address must remain valid. Historically, this has been ensured by using defines from <mach/iomap.h> in both the implementation of addruart, and the machine's .map_io() function. However, with the move to single zImage, we wish to remove <mach/iomap.h>. To enable this, the macro addruart may be used when constructing the late page tables too; addruart is exposed as a C function debug_ll_addr(), and used to set up the required mapping in debug_ll_io_init(), which may called on an opt-in basis from a machine's .map_io() function. Signed-off-by: Rob Herring <rob.herring@calxeda.com> [swarren: Mask map.virtual with PAGE_MASK. Checked for NULL results from debug_ll_addr (e.g. when selected UART isn't valid). Fixed compile when either !CONFIG_DEBUG_LL or CONFIG_DEBUG_SEMIHOSTING.] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-10-22 19:42:54 +02:00
ARM: 7338/1: add support for early console output via semihosting This is a very simple method for code running in an emulator, or under the supervision of a debugger, to use I/O facilities on the controlling host. Tested with OpenOCD, and ARM's Fast Models. Details on semihosting can be found in chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-22 21:58:03 +01:00
#else
ENTRY(printascii)
mov r1, r0
mov r0, #0x04 @ SYS_WRITE0
ARM( svc #0x123456 )
ARM: 8704/1: semihosting: use proper instruction on v7m processors The svc instruction doesn't exist on v7m processors. Semihosting ops are invoked with the bkpt instruction instead. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-10-06 20:39:57 +02:00
#ifdef CONFIG_CPU_V7M
THUMB( bkpt #0xab )
#else
ARM: 7338/1: add support for early console output via semihosting This is a very simple method for code running in an emulator, or under the supervision of a debugger, to use I/O facilities on the controlling host. Tested with OpenOCD, and ARM's Fast Models. Details on semihosting can be found in chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-22 21:58:03 +01:00
THUMB( svc #0xab )
ARM: 8704/1: semihosting: use proper instruction on v7m processors The svc instruction doesn't exist on v7m processors. Semihosting ops are invoked with the bkpt instruction instead. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-10-06 20:39:57 +02:00
#endif
ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ ARMv6 and greater introduced a new instruction ("bx") which can be used to return from function calls. Recent CPUs perform better when the "bx lr" instruction is used rather than the "mov pc, lr" instruction, and this sequence is strongly recommended to be used by the ARM architecture manual (section A.4.1.1). We provide a new macro "ret" with all its variants for the condition code which will resolve to the appropriate instruction. Rather than doing this piecemeal, and miss some instances, change all the "mov pc" instances to use the new macro, with the exception of the "movs" instruction and the kprobes code. This allows us to detect the "mov pc, lr" case and fix it up - and also gives us the possibility of deploying this for other registers depending on the CPU selection. Reported-by: Will Deacon <will.deacon@arm.com> Tested-by: Stephen Warren <swarren@nvidia.com> # Tegra Jetson TK1 Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> # mioa701_bootresume.S Tested-by: Andrew Lunn <andrew@lunn.ch> # Kirkwood Tested-by: Shawn Guo <shawn.guo@freescale.com> Tested-by: Tony Lindgren <tony@atomide.com> # OMAPs Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> # Armada XP, 375, 385 Acked-by: Sekhar Nori <nsekhar@ti.com> # DaVinci Acked-by: Christoffer Dall <christoffer.dall@linaro.org> # kvm/hyp Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> # PXA3xx Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> # Xen Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> # ARMv7M Tested-by: Simon Horman <horms+renesas@verge.net.au> # Shmobile Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-30 17:29:12 +02:00
ret lr
ARM: 7338/1: add support for early console output via semihosting This is a very simple method for code running in an emulator, or under the supervision of a debugger, to use I/O facilities on the controlling host. Tested with OpenOCD, and ARM's Fast Models. Details on semihosting can be found in chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-22 21:58:03 +01:00
ENDPROC(printascii)
ENTRY(printch)
ARM: 8703/1: debug.S: move hexbuf to a writable section This was located in .text which is meant to be read-only. And in the XIP case this shortcut simply doesn't work and may trigger a Flash controller mode switch and crash the kernel. Move it to the .bss area. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-10-06 20:36:58 +02:00
adr r1, hexbuf_rel
ldr r2, [r1]
add r1, r1, r2
ARM: 7338/1: add support for early console output via semihosting This is a very simple method for code running in an emulator, or under the supervision of a debugger, to use I/O facilities on the controlling host. Tested with OpenOCD, and ARM's Fast Models. Details on semihosting can be found in chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-22 21:58:03 +01:00
strb r0, [r1]
mov r0, #0x03 @ SYS_WRITEC
ARM( svc #0x123456 )
ARM: 8704/1: semihosting: use proper instruction on v7m processors The svc instruction doesn't exist on v7m processors. Semihosting ops are invoked with the bkpt instruction instead. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-10-06 20:39:57 +02:00
#ifdef CONFIG_CPU_V7M
THUMB( bkpt #0xab )
#else
ARM: 7338/1: add support for early console output via semihosting This is a very simple method for code running in an emulator, or under the supervision of a debugger, to use I/O facilities on the controlling host. Tested with OpenOCD, and ARM's Fast Models. Details on semihosting can be found in chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-22 21:58:03 +01:00
THUMB( svc #0xab )
ARM: 8704/1: semihosting: use proper instruction on v7m processors The svc instruction doesn't exist on v7m processors. Semihosting ops are invoked with the bkpt instruction instead. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-10-06 20:39:57 +02:00
#endif
ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ ARMv6 and greater introduced a new instruction ("bx") which can be used to return from function calls. Recent CPUs perform better when the "bx lr" instruction is used rather than the "mov pc, lr" instruction, and this sequence is strongly recommended to be used by the ARM architecture manual (section A.4.1.1). We provide a new macro "ret" with all its variants for the condition code which will resolve to the appropriate instruction. Rather than doing this piecemeal, and miss some instances, change all the "mov pc" instances to use the new macro, with the exception of the "movs" instruction and the kprobes code. This allows us to detect the "mov pc, lr" case and fix it up - and also gives us the possibility of deploying this for other registers depending on the CPU selection. Reported-by: Will Deacon <will.deacon@arm.com> Tested-by: Stephen Warren <swarren@nvidia.com> # Tegra Jetson TK1 Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> # mioa701_bootresume.S Tested-by: Andrew Lunn <andrew@lunn.ch> # Kirkwood Tested-by: Shawn Guo <shawn.guo@freescale.com> Tested-by: Tony Lindgren <tony@atomide.com> # OMAPs Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> # Armada XP, 375, 385 Acked-by: Sekhar Nori <nsekhar@ti.com> # DaVinci Acked-by: Christoffer Dall <christoffer.dall@linaro.org> # kvm/hyp Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> # PXA3xx Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> # Xen Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> # ARMv7M Tested-by: Simon Horman <horms+renesas@verge.net.au> # Shmobile Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-30 17:29:12 +02:00
ret lr
ARM: 7338/1: add support for early console output via semihosting This is a very simple method for code running in an emulator, or under the supervision of a debugger, to use I/O facilities on the controlling host. Tested with OpenOCD, and ARM's Fast Models. Details on semihosting can be found in chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-22 21:58:03 +01:00
ENDPROC(printch)
ARM: implement debug_ll_io_init() When using DEBUG_LL, the UART's (or other HW's) registers are mapped into early page tables based on the results of assembly macro addruart. Later, when the page tables are replaced, the same virtual address must remain valid. Historically, this has been ensured by using defines from <mach/iomap.h> in both the implementation of addruart, and the machine's .map_io() function. However, with the move to single zImage, we wish to remove <mach/iomap.h>. To enable this, the macro addruart may be used when constructing the late page tables too; addruart is exposed as a C function debug_ll_addr(), and used to set up the required mapping in debug_ll_io_init(), which may called on an opt-in basis from a machine's .map_io() function. Signed-off-by: Rob Herring <rob.herring@calxeda.com> [swarren: Mask map.virtual with PAGE_MASK. Checked for NULL results from debug_ll_addr (e.g. when selected UART isn't valid). Fixed compile when either !CONFIG_DEBUG_LL or CONFIG_DEBUG_SEMIHOSTING.] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-10-22 19:42:54 +02:00
ENTRY(debug_ll_addr)
mov r2, #0
str r2, [r0]
str r2, [r1]
ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ ARMv6 and greater introduced a new instruction ("bx") which can be used to return from function calls. Recent CPUs perform better when the "bx lr" instruction is used rather than the "mov pc, lr" instruction, and this sequence is strongly recommended to be used by the ARM architecture manual (section A.4.1.1). We provide a new macro "ret" with all its variants for the condition code which will resolve to the appropriate instruction. Rather than doing this piecemeal, and miss some instances, change all the "mov pc" instances to use the new macro, with the exception of the "movs" instruction and the kprobes code. This allows us to detect the "mov pc, lr" case and fix it up - and also gives us the possibility of deploying this for other registers depending on the CPU selection. Reported-by: Will Deacon <will.deacon@arm.com> Tested-by: Stephen Warren <swarren@nvidia.com> # Tegra Jetson TK1 Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> # mioa701_bootresume.S Tested-by: Andrew Lunn <andrew@lunn.ch> # Kirkwood Tested-by: Shawn Guo <shawn.guo@freescale.com> Tested-by: Tony Lindgren <tony@atomide.com> # OMAPs Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> # Armada XP, 375, 385 Acked-by: Sekhar Nori <nsekhar@ti.com> # DaVinci Acked-by: Christoffer Dall <christoffer.dall@linaro.org> # kvm/hyp Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> # PXA3xx Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> # Xen Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> # ARMv7M Tested-by: Simon Horman <horms+renesas@verge.net.au> # Shmobile Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-30 17:29:12 +02:00
ret lr
ARM: implement debug_ll_io_init() When using DEBUG_LL, the UART's (or other HW's) registers are mapped into early page tables based on the results of assembly macro addruart. Later, when the page tables are replaced, the same virtual address must remain valid. Historically, this has been ensured by using defines from <mach/iomap.h> in both the implementation of addruart, and the machine's .map_io() function. However, with the move to single zImage, we wish to remove <mach/iomap.h>. To enable this, the macro addruart may be used when constructing the late page tables too; addruart is exposed as a C function debug_ll_addr(), and used to set up the required mapping in debug_ll_io_init(), which may called on an opt-in basis from a machine's .map_io() function. Signed-off-by: Rob Herring <rob.herring@calxeda.com> [swarren: Mask map.virtual with PAGE_MASK. Checked for NULL results from debug_ll_addr (e.g. when selected UART isn't valid). Fixed compile when either !CONFIG_DEBUG_LL or CONFIG_DEBUG_SEMIHOSTING.] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-10-22 19:42:54 +02:00
ENDPROC(debug_ll_addr)
ARM: 7338/1: add support for early console output via semihosting This is a very simple method for code running in an emulator, or under the supervision of a debugger, to use I/O facilities on the controlling host. Tested with OpenOCD, and ARM's Fast Models. Details on semihosting can be found in chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-22 21:58:03 +01:00
#endif