linux/drivers/ide/macide.c

132 lines
2.8 KiB
C
Raw Normal View History

/*
* Macintosh IDE Driver
*
* Copyright (C) 1998 by Michael Schmitz
*
* This driver was written based on information obtained from the MacOS IDE
* driver binary by Mikael Forselius
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*/
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/ide.h>
#include <asm/machw.h>
#include <asm/macintosh.h>
#include <asm/macints.h>
#include <asm/mac_baboon.h>
#define IDE_BASE 0x50F1A000 /* Base address of IDE controller */
/*
* Generic IDE registers as offsets from the base
* These match MkLinux so they should be correct.
*/
#define IDE_CONTROL 0x38 /* control/altstatus */
/*
* Mac-specific registers
*/
/*
* this register is odd; it doesn't seem to do much and it's
* not word-aligned like virtually every other hardware register
* on the Mac...
*/
#define IDE_IFR 0x101 /* (0x101) IDE interrupt flags on Quadra:
*
* Bit 0+1: some interrupt flags
* Bit 2+3: some interrupt enable
* Bit 4: ??
* Bit 5: IDE interrupt flag (any hwif)
* Bit 6: maybe IDE interrupt enable (any hwif) ??
* Bit 7: Any interrupt condition
*/
volatile unsigned char *ide_ifr = (unsigned char *) (IDE_BASE + IDE_IFR);
int macide_ack_intr(ide_hwif_t* hwif)
{
if (*ide_ifr & 0x20) {
*ide_ifr &= ~0x20;
return 1;
}
return 0;
}
static void __init macide_setup_ports(hw_regs_t *hw, unsigned long base,
int irq, ide_ack_intr_t *ack_intr)
{
int i;
memset(hw, 0, sizeof(*hw));
for (i = 0; i < 8; i++)
hw->io_ports_array[i] = base + i * 4;
hw->io_ports.ctl_addr = base + IDE_CONTROL;
hw->irq = irq;
hw->ack_intr = ack_intr;
hw->chipset = ide_generic;
}
static const char *mac_ide_name[] =
{ "Quadra", "Powerbook", "Powerbook Baboon" };
/*
* Probe for a Macintosh IDE interface
*/
ide: make remaining built-in only IDE host drivers modular (take 2) * Make remaining built-in only IDE host drivers modular, add ide-scan-pci.c file for probing PCI host drivers registered with IDE core (special case for built-in IDE and CONFIG_IDEPCI_PCIBUS_ORDER=y) and then take care of the ordering in which all IDE host drivers are probed when IDE is built-in during link time. * Move probing of gayle, falconide, macide, q40ide and buddha (m68k arch specific) host drivers, before PCI ones (no PCI on m68k), ide-cris (cris arch specific), cmd640 (x86 arch specific) and pmac (ppc arch specific). * Move probing of ide-cris (cris arch specific) host driver before cmd640 (x86 arch specific). * Move probing of mpc8xx (ppc specific) host driver before ide-pnp (depends on ISA and none of ppc platform that use mpc8xx supports ISA) and ide-h8300 (h8300 arch specific). * Add "probe_vlb" kernel parameter to cmd640 host driver and update Documentation/ide.txt accordingly. * Make IDE_ARM config option visible so it can also be disabled if needed. * Remove bogus comment from ide.c while at it. v2: * Fix two issues spotted by Sergei: - replace ENOMEM error value by ENOENT in ide-h8300 host driver - fix MODULE_PARM_DESC() in cmd640 host driver Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26 20:13:07 +01:00
static int __init macide_init(void)
{
ide_ack_intr_t *ack_intr;
unsigned long base;
int irq;
hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
if (!MACH_IS_MAC)
return -ENODEV;
switch (macintosh_config->ide_type) {
case MAC_IDE_QUADRA:
base = IDE_BASE;
ack_intr = macide_ack_intr;
irq = IRQ_NUBUS_F;
break;
case MAC_IDE_PB:
base = IDE_BASE;
ack_intr = macide_ack_intr;
irq = IRQ_NUBUS_C;
break;
case MAC_IDE_BABOON:
base = BABOON_BASE;
ack_intr = NULL;
irq = IRQ_BABOON_1;
break;
default:
ide: make remaining built-in only IDE host drivers modular (take 2) * Make remaining built-in only IDE host drivers modular, add ide-scan-pci.c file for probing PCI host drivers registered with IDE core (special case for built-in IDE and CONFIG_IDEPCI_PCIBUS_ORDER=y) and then take care of the ordering in which all IDE host drivers are probed when IDE is built-in during link time. * Move probing of gayle, falconide, macide, q40ide and buddha (m68k arch specific) host drivers, before PCI ones (no PCI on m68k), ide-cris (cris arch specific), cmd640 (x86 arch specific) and pmac (ppc arch specific). * Move probing of ide-cris (cris arch specific) host driver before cmd640 (x86 arch specific). * Move probing of mpc8xx (ppc specific) host driver before ide-pnp (depends on ISA and none of ppc platform that use mpc8xx supports ISA) and ide-h8300 (h8300 arch specific). * Add "probe_vlb" kernel parameter to cmd640 host driver and update Documentation/ide.txt accordingly. * Make IDE_ARM config option visible so it can also be disabled if needed. * Remove bogus comment from ide.c while at it. v2: * Fix two issues spotted by Sergei: - replace ENOMEM error value by ENOENT in ide-h8300 host driver - fix MODULE_PARM_DESC() in cmd640 host driver Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26 20:13:07 +01:00
return -ENODEV;
}
printk(KERN_INFO "ide: Macintosh %s IDE controller\n",
mac_ide_name[macintosh_config->ide_type - 1]);
macide_setup_ports(&hw, base, irq, ack_intr);
return ide_host_add(NULL, hws, NULL);
}
ide: make remaining built-in only IDE host drivers modular (take 2) * Make remaining built-in only IDE host drivers modular, add ide-scan-pci.c file for probing PCI host drivers registered with IDE core (special case for built-in IDE and CONFIG_IDEPCI_PCIBUS_ORDER=y) and then take care of the ordering in which all IDE host drivers are probed when IDE is built-in during link time. * Move probing of gayle, falconide, macide, q40ide and buddha (m68k arch specific) host drivers, before PCI ones (no PCI on m68k), ide-cris (cris arch specific), cmd640 (x86 arch specific) and pmac (ppc arch specific). * Move probing of ide-cris (cris arch specific) host driver before cmd640 (x86 arch specific). * Move probing of mpc8xx (ppc specific) host driver before ide-pnp (depends on ISA and none of ppc platform that use mpc8xx supports ISA) and ide-h8300 (h8300 arch specific). * Add "probe_vlb" kernel parameter to cmd640 host driver and update Documentation/ide.txt accordingly. * Make IDE_ARM config option visible so it can also be disabled if needed. * Remove bogus comment from ide.c while at it. v2: * Fix two issues spotted by Sergei: - replace ENOMEM error value by ENOENT in ide-h8300 host driver - fix MODULE_PARM_DESC() in cmd640 host driver Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26 20:13:07 +01:00
module_init(macide_init);
MODULE_LICENSE("GPL");