linux/drivers/scsi/ipr.c

9142 lines
254 KiB
C
Raw Normal View History

/*
* ipr.c -- driver for IBM Power Linux RAID adapters
*
* Written By: Brian King <brking@us.ibm.com>, IBM Corporation
*
* Copyright (C) 2003, 2004 IBM Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
/*
* Notes:
*
* This driver is used to control the following SCSI adapters:
*
* IBM iSeries: 5702, 5703, 2780, 5709, 570A, 570B
*
* IBM pSeries: PCI-X Dual Channel Ultra 320 SCSI RAID Adapter
* PCI-X Dual Channel Ultra 320 SCSI Adapter
* PCI-X Dual Channel Ultra 320 SCSI RAID Enablement Card
* Embedded SCSI adapter on p615 and p655 systems
*
* Supported Hardware Features:
* - Ultra 320 SCSI controller
* - PCI-X host interface
* - Embedded PowerPC RISC Processor and Hardware XOR DMA Engine
* - Non-Volatile Write Cache
* - Supports attachment of non-RAID disks, tape, and optical devices
* - RAID Levels 0, 5, 10
* - Hot spare
* - Background Parity Checking
* - Background Data Scrubbing
* - Ability to increase the capacity of an existing RAID 5 disk array
* by adding disks
*
* Driver Features:
* - Tagged command queuing
* - Adapter microcode download
* - PCI hot plug
* - SCSI device hot plug
*
*/
#include <linux/fs.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/kernel.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 09:04:11 +01:00
#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/wait.h>
#include <linux/spinlock.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/blkdev.h>
#include <linux/firmware.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/libata.h>
#include <linux/hdreg.h>
#include <linux/reboot.h>
#include <linux/stringify.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/processor.h>
#include <scsi/scsi.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsi_eh.h>
#include <scsi/scsi_cmnd.h>
#include "ipr.h"
/*
* Global Data
*/
static LIST_HEAD(ipr_ioa_head);
static unsigned int ipr_log_level = IPR_DEFAULT_LOG_LEVEL;
static unsigned int ipr_max_speed = 1;
static int ipr_testmode = 0;
static unsigned int ipr_fastfail = 0;
static unsigned int ipr_transop_timeout = 0;
static unsigned int ipr_debug = 0;
static unsigned int ipr_max_devs = IPR_DEFAULT_SIS64_DEVS;
static unsigned int ipr_dual_ioa_raid = 1;
static DEFINE_SPINLOCK(ipr_driver_lock);
/* This table describes the differences between DMA controller chips */
static const struct ipr_chip_cfg_t ipr_chip_cfg[] = {
{ /* Gemstone, Citrine, Obsidian, and Obsidian-E */
.mailbox = 0x0042C,
.cache_line_size = 0x20,
{
.set_interrupt_mask_reg = 0x0022C,
.clr_interrupt_mask_reg = 0x00230,
.clr_interrupt_mask_reg32 = 0x00230,
.sense_interrupt_mask_reg = 0x0022C,
.sense_interrupt_mask_reg32 = 0x0022C,
.clr_interrupt_reg = 0x00228,
.clr_interrupt_reg32 = 0x00228,
.sense_interrupt_reg = 0x00224,
.sense_interrupt_reg32 = 0x00224,
.ioarrin_reg = 0x00404,
.sense_uproc_interrupt_reg = 0x00214,
.sense_uproc_interrupt_reg32 = 0x00214,
.set_uproc_interrupt_reg = 0x00214,
.set_uproc_interrupt_reg32 = 0x00214,
.clr_uproc_interrupt_reg = 0x00218,
.clr_uproc_interrupt_reg32 = 0x00218
}
},
{ /* Snipe and Scamp */
.mailbox = 0x0052C,
.cache_line_size = 0x20,
{
.set_interrupt_mask_reg = 0x00288,
.clr_interrupt_mask_reg = 0x0028C,
.clr_interrupt_mask_reg32 = 0x0028C,
.sense_interrupt_mask_reg = 0x00288,
.sense_interrupt_mask_reg32 = 0x00288,
.clr_interrupt_reg = 0x00284,
.clr_interrupt_reg32 = 0x00284,
.sense_interrupt_reg = 0x00280,
.sense_interrupt_reg32 = 0x00280,
.ioarrin_reg = 0x00504,
.sense_uproc_interrupt_reg = 0x00290,
.sense_uproc_interrupt_reg32 = 0x00290,
.set_uproc_interrupt_reg = 0x00290,
.set_uproc_interrupt_reg32 = 0x00290,
.clr_uproc_interrupt_reg = 0x00294,
.clr_uproc_interrupt_reg32 = 0x00294
}
},
{ /* CRoC */
.mailbox = 0x00040,
.cache_line_size = 0x20,
{
.set_interrupt_mask_reg = 0x00010,
.clr_interrupt_mask_reg = 0x00018,
.clr_interrupt_mask_reg32 = 0x0001C,
.sense_interrupt_mask_reg = 0x00010,
.sense_interrupt_mask_reg32 = 0x00014,
.clr_interrupt_reg = 0x00008,
.clr_interrupt_reg32 = 0x0000C,
.sense_interrupt_reg = 0x00000,
.sense_interrupt_reg32 = 0x00004,
.ioarrin_reg = 0x00070,
.sense_uproc_interrupt_reg = 0x00020,
.sense_uproc_interrupt_reg32 = 0x00024,
.set_uproc_interrupt_reg = 0x00020,
.set_uproc_interrupt_reg32 = 0x00024,
.clr_uproc_interrupt_reg = 0x00028,
.clr_uproc_interrupt_reg32 = 0x0002C,
.init_feedback_reg = 0x0005C,
.dump_addr_reg = 0x00064,
.dump_data_reg = 0x00068,
.endian_swap_reg = 0x00084
}
},
};
static const struct ipr_chip_t ipr_chip[] = {
{ PCI_VENDOR_ID_MYLEX, PCI_DEVICE_ID_IBM_GEMSTONE, IPR_USE_LSI, IPR_SIS32, IPR_PCI_CFG, &ipr_chip_cfg[0] },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE, IPR_USE_LSI, IPR_SIS32, IPR_PCI_CFG, &ipr_chip_cfg[0] },
{ PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_OBSIDIAN, IPR_USE_LSI, IPR_SIS32, IPR_PCI_CFG, &ipr_chip_cfg[0] },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN, IPR_USE_LSI, IPR_SIS32, IPR_PCI_CFG, &ipr_chip_cfg[0] },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN_E, IPR_USE_MSI, IPR_SIS32, IPR_PCI_CFG, &ipr_chip_cfg[0] },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_SNIPE, IPR_USE_LSI, IPR_SIS32, IPR_PCI_CFG, &ipr_chip_cfg[1] },
{ PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_SCAMP, IPR_USE_LSI, IPR_SIS32, IPR_PCI_CFG, &ipr_chip_cfg[1] },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_FPGA_E2, IPR_USE_MSI, IPR_SIS64, IPR_MMIO, &ipr_chip_cfg[2] },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_ASIC_E2, IPR_USE_MSI, IPR_SIS64, IPR_MMIO, &ipr_chip_cfg[2] }
};
static int ipr_max_bus_speeds [] = {
IPR_80MBs_SCSI_RATE, IPR_U160_SCSI_RATE, IPR_U320_SCSI_RATE
};
MODULE_AUTHOR("Brian King <brking@us.ibm.com>");
MODULE_DESCRIPTION("IBM Power RAID SCSI Adapter Driver");
module_param_named(max_speed, ipr_max_speed, uint, 0);
MODULE_PARM_DESC(max_speed, "Maximum bus speed (0-2). Default: 1=U160. Speeds: 0=80 MB/s, 1=U160, 2=U320");
module_param_named(log_level, ipr_log_level, uint, 0);
MODULE_PARM_DESC(log_level, "Set to 0 - 4 for increasing verbosity of device driver");
module_param_named(testmode, ipr_testmode, int, 0);
MODULE_PARM_DESC(testmode, "DANGEROUS!!! Allows unsupported configurations");
module_param_named(fastfail, ipr_fastfail, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(fastfail, "Reduce timeouts and retries");
module_param_named(transop_timeout, ipr_transop_timeout, int, 0);
MODULE_PARM_DESC(transop_timeout, "Time in seconds to wait for adapter to come operational (default: 300)");
module_param_named(debug, ipr_debug, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Enable device driver debugging logging. Set to 1 to enable. (default: 0)");
module_param_named(dual_ioa_raid, ipr_dual_ioa_raid, int, 0);
MODULE_PARM_DESC(dual_ioa_raid, "Enable dual adapter RAID support. Set to 1 to enable. (default: 1)");
module_param_named(max_devs, ipr_max_devs, int, 0);
MODULE_PARM_DESC(max_devs, "Specify the maximum number of physical devices. "
"[Default=" __stringify(IPR_DEFAULT_SIS64_DEVS) "]");
MODULE_LICENSE("GPL");
MODULE_VERSION(IPR_DRIVER_VERSION);
/* A constant array of IOASCs/URCs/Error Messages */
static const
struct ipr_error_table_t ipr_error_table[] = {
{0x00000000, 1, IPR_DEFAULT_LOG_LEVEL,
"8155: An unknown error was received"},
{0x00330000, 0, 0,
"Soft underlength error"},
{0x005A0000, 0, 0,
"Command to be cancelled not found"},
{0x00808000, 0, 0,
"Qualified success"},
{0x01080000, 1, IPR_DEFAULT_LOG_LEVEL,
"FFFE: Soft device bus error recovered by the IOA"},
{0x01088100, 0, IPR_DEFAULT_LOG_LEVEL,
"4101: Soft device bus fabric error"},
{0x01100100, 0, IPR_DEFAULT_LOG_LEVEL,
"FFFC: Logical block guard error recovered by the device"},
{0x01100300, 0, IPR_DEFAULT_LOG_LEVEL,
"FFFC: Logical block reference tag error recovered by the device"},
{0x01108300, 0, IPR_DEFAULT_LOG_LEVEL,
"4171: Recovered scatter list tag / sequence number error"},
{0x01109000, 0, IPR_DEFAULT_LOG_LEVEL,
"FF3D: Recovered logical block CRC error on IOA to Host transfer"},
{0x01109200, 0, IPR_DEFAULT_LOG_LEVEL,
"4171: Recovered logical block sequence number error on IOA to Host transfer"},
{0x0110A000, 0, IPR_DEFAULT_LOG_LEVEL,
"FFFD: Recovered logical block reference tag error detected by the IOA"},
{0x0110A100, 0, IPR_DEFAULT_LOG_LEVEL,
"FFFD: Logical block guard error recovered by the IOA"},
{0x01170600, 0, IPR_DEFAULT_LOG_LEVEL,
"FFF9: Device sector reassign successful"},
{0x01170900, 0, IPR_DEFAULT_LOG_LEVEL,
"FFF7: Media error recovered by device rewrite procedures"},
{0x01180200, 0, IPR_DEFAULT_LOG_LEVEL,
"7001: IOA sector reassignment successful"},
{0x01180500, 0, IPR_DEFAULT_LOG_LEVEL,
"FFF9: Soft media error. Sector reassignment recommended"},
{0x01180600, 0, IPR_DEFAULT_LOG_LEVEL,
"FFF7: Media error recovered by IOA rewrite procedures"},
{0x01418000, 0, IPR_DEFAULT_LOG_LEVEL,
"FF3D: Soft PCI bus error recovered by the IOA"},
{0x01440000, 1, IPR_DEFAULT_LOG_LEVEL,
"FFF6: Device hardware error recovered by the IOA"},
{0x01448100, 0, IPR_DEFAULT_LOG_LEVEL,
"FFF6: Device hardware error recovered by the device"},
{0x01448200, 1, IPR_DEFAULT_LOG_LEVEL,
"FF3D: Soft IOA error recovered by the IOA"},
{0x01448300, 0, IPR_DEFAULT_LOG_LEVEL,
"FFFA: Undefined device response recovered by the IOA"},
{0x014A0000, 1, IPR_DEFAULT_LOG_LEVEL,
"FFF6: Device bus error, message or command phase"},
{0x014A8000, 0, IPR_DEFAULT_LOG_LEVEL,
"FFFE: Task Management Function failed"},
{0x015D0000, 0, IPR_DEFAULT_LOG_LEVEL,
"FFF6: Failure prediction threshold exceeded"},
{0x015D9200, 0, IPR_DEFAULT_LOG_LEVEL,
"8009: Impending cache battery pack failure"},
{0x02040400, 0, 0,
"34FF: Disk device format in progress"},
{0x02048000, 0, IPR_DEFAULT_LOG_LEVEL,
"9070: IOA requested reset"},
{0x023F0000, 0, 0,
"Synchronization required"},
{0x024E0000, 0, 0,
"No ready, IOA shutdown"},
{0x025A0000, 0, 0,
"Not ready, IOA has been shutdown"},
{0x02670100, 0, IPR_DEFAULT_LOG_LEVEL,
"3020: Storage subsystem configuration error"},
{0x03110B00, 0, 0,
"FFF5: Medium error, data unreadable, recommend reassign"},
{0x03110C00, 0, 0,
"7000: Medium error, data unreadable, do not reassign"},
{0x03310000, 0, IPR_DEFAULT_LOG_LEVEL,
"FFF3: Disk media format bad"},
{0x04050000, 0, IPR_DEFAULT_LOG_LEVEL,
"3002: Addressed device failed to respond to selection"},
{0x04080000, 1, IPR_DEFAULT_LOG_LEVEL,
"3100: Device bus error"},
{0x04080100, 0, IPR_DEFAULT_LOG_LEVEL,
"3109: IOA timed out a device command"},
{0x04088000, 0, 0,
"3120: SCSI bus is not operational"},
{0x04088100, 0, IPR_DEFAULT_LOG_LEVEL,
"4100: Hard device bus fabric error"},
{0x04100100, 0, IPR_DEFAULT_LOG_LEVEL,
"310C: Logical block guard error detected by the device"},
{0x04100300, 0, IPR_DEFAULT_LOG_LEVEL,
"310C: Logical block reference tag error detected by the device"},
{0x04108300, 1, IPR_DEFAULT_LOG_LEVEL,
"4170: Scatter list tag / sequence number error"},
{0x04109000, 1, IPR_DEFAULT_LOG_LEVEL,
"8150: Logical block CRC error on IOA to Host transfer"},
{0x04109200, 1, IPR_DEFAULT_LOG_LEVEL,
"4170: Logical block sequence number error on IOA to Host transfer"},
{0x0410A000, 0, IPR_DEFAULT_LOG_LEVEL,
"310D: Logical block reference tag error detected by the IOA"},
{0x0410A100, 0, IPR_DEFAULT_LOG_LEVEL,
"310D: Logical block guard error detected by the IOA"},
{0x04118000, 0, IPR_DEFAULT_LOG_LEVEL,
"9000: IOA reserved area data check"},
{0x04118100, 0, IPR_DEFAULT_LOG_LEVEL,
"9001: IOA reserved area invalid data pattern"},
{0x04118200, 0, IPR_DEFAULT_LOG_LEVEL,
"9002: IOA reserved area LRC error"},
{0x04118300, 1, IPR_DEFAULT_LOG_LEVEL,
"Hardware Error, IOA metadata access error"},
{0x04320000, 0, IPR_DEFAULT_LOG_LEVEL,
"102E: Out of alternate sectors for disk storage"},
{0x04330000, 1, IPR_DEFAULT_LOG_LEVEL,
"FFF4: Data transfer underlength error"},
{0x04338000, 1, IPR_DEFAULT_LOG_LEVEL,
"FFF4: Data transfer overlength error"},
{0x043E0100, 0, IPR_DEFAULT_LOG_LEVEL,
"3400: Logical unit failure"},
{0x04408500, 0, IPR_DEFAULT_LOG_LEVEL,
"FFF4: Device microcode is corrupt"},
{0x04418000, 1, IPR_DEFAULT_LOG_LEVEL,
"8150: PCI bus error"},
{0x04430000, 1, 0,
"Unsupported device bus message received"},
{0x04440000, 1, IPR_DEFAULT_LOG_LEVEL,
"FFF4: Disk device problem"},
{0x04448200, 1, IPR_DEFAULT_LOG_LEVEL,
"8150: Permanent IOA failure"},
{0x04448300, 0, IPR_DEFAULT_LOG_LEVEL,
"3010: Disk device returned wrong response to IOA"},
{0x04448400, 0, IPR_DEFAULT_LOG_LEVEL,
"8151: IOA microcode error"},
{0x04448500, 0, 0,
"Device bus status error"},
{0x04448600, 0, IPR_DEFAULT_LOG_LEVEL,
"8157: IOA error requiring IOA reset to recover"},
{0x04448700, 0, 0,
"ATA device status error"},
{0x04490000, 0, 0,
"Message reject received from the device"},
{0x04449200, 0, IPR_DEFAULT_LOG_LEVEL,
"8008: A permanent cache battery pack failure occurred"},
{0x0444A000, 0, IPR_DEFAULT_LOG_LEVEL,
"9090: Disk unit has been modified after the last known status"},
{0x0444A200, 0, IPR_DEFAULT_LOG_LEVEL,
"9081: IOA detected device error"},
{0x0444A300, 0, IPR_DEFAULT_LOG_LEVEL,
"9082: IOA detected device error"},
{0x044A0000, 1, IPR_DEFAULT_LOG_LEVEL,
"3110: Device bus error, message or command phase"},
{0x044A8000, 1, IPR_DEFAULT_LOG_LEVEL,
"3110: SAS Command / Task Management Function failed"},
{0x04670400, 0, IPR_DEFAULT_LOG_LEVEL,
"9091: Incorrect hardware configuration change has been detected"},
{0x04678000, 0, IPR_DEFAULT_LOG_LEVEL,
"9073: Invalid multi-adapter configuration"},
{0x04678100, 0, IPR_DEFAULT_LOG_LEVEL,
"4010: Incorrect connection between cascaded expanders"},
{0x04678200, 0, IPR_DEFAULT_LOG_LEVEL,
"4020: Connections exceed IOA design limits"},
{0x04678300, 0, IPR_DEFAULT_LOG_LEVEL,
"4030: Incorrect multipath connection"},
{0x04679000, 0, IPR_DEFAULT_LOG_LEVEL,
"4110: Unsupported enclosure function"},
{0x046E0000, 0, IPR_DEFAULT_LOG_LEVEL,
"FFF4: Command to logical unit failed"},
{0x05240000, 1, 0,
"Illegal request, invalid request type or request packet"},
{0x05250000, 0, 0,
"Illegal request, invalid resource handle"},
{0x05258000, 0, 0,
"Illegal request, commands not allowed to this device"},
{0x05258100, 0, 0,
"Illegal request, command not allowed to a secondary adapter"},
{0x05258200, 0, 0,
"Illegal request, command not allowed to a non-optimized resource"},
{0x05260000, 0, 0,
"Illegal request, invalid field in parameter list"},
{0x05260100, 0, 0,
"Illegal request, parameter not supported"},
{0x05260200, 0, 0,
"Illegal request, parameter value invalid"},
{0x052C0000, 0, 0,
"Illegal request, command sequence error"},
{0x052C8000, 1, 0,
"Illegal request, dual adapter support not enabled"},
{0x06040500, 0, IPR_DEFAULT_LOG_LEVEL,
"9031: Array protection temporarily suspended, protection resuming"},
{0x06040600, 0, IPR_DEFAULT_LOG_LEVEL,
"9040: Array protection temporarily suspended, protection resuming"},
{0x06288000, 0, IPR_DEFAULT_LOG_LEVEL,
"3140: Device bus not ready to ready transition"},
{0x06290000, 0, IPR_DEFAULT_LOG_LEVEL,
"FFFB: SCSI bus was reset"},
{0x06290500, 0, 0,
"FFFE: SCSI bus transition to single ended"},
{0x06290600, 0, 0,
"FFFE: SCSI bus transition to LVD"},
{0x06298000, 0, IPR_DEFAULT_LOG_LEVEL,
"FFFB: SCSI bus was reset by another initiator"},
{0x063F0300, 0, IPR_DEFAULT_LOG_LEVEL,
"3029: A device replacement has occurred"},
{0x064C8000, 0, IPR_DEFAULT_LOG_LEVEL,
"9051: IOA cache data exists for a missing or failed device"},
{0x064C8100, 0, IPR_DEFAULT_LOG_LEVEL,
"9055: Auxiliary cache IOA contains cache data needed by the primary IOA"},
{0x06670100, 0, IPR_DEFAULT_LOG_LEVEL,
"9025: Disk unit is not supported at its physical location"},
{0x06670600, 0, IPR_DEFAULT_LOG_LEVEL,
"3020: IOA detected a SCSI bus configuration error"},
{0x06678000, 0, IPR_DEFAULT_LOG_LEVEL,
"3150: SCSI bus configuration error"},
{0x06678100, 0, IPR_DEFAULT_LOG_LEVEL,
"9074: Asymmetric advanced function disk configuration"},
{0x06678300, 0, IPR_DEFAULT_LOG_LEVEL,
"4040: Incomplete multipath connection between IOA and enclosure"},
{0x06678400, 0, IPR_DEFAULT_LOG_LEVEL,
"4041: Incomplete multipath connection between enclosure and device"},
{0x06678500, 0, IPR_DEFAULT_LOG_LEVEL,
"9075: Incomplete multipath connection between IOA and remote IOA"},
{0x06678600, 0, IPR_DEFAULT_LOG_LEVEL,
"9076: Configuration error, missing remote IOA"},
{0x06679100, 0, IPR_DEFAULT_LOG_LEVEL,
"4050: Enclosure does not support a required multipath function"},
{0x06690000, 0, IPR_DEFAULT_LOG_LEVEL,
"4070: Logically bad block written on device"},
{0x06690200, 0, IPR_DEFAULT_LOG_LEVEL,
"9041: Array protection temporarily suspended"},
{0x06698200, 0, IPR_DEFAULT_LOG_LEVEL,
"9042: Corrupt array parity detected on specified device"},
{0x066B0200, 0, IPR_DEFAULT_LOG_LEVEL,
"9030: Array no longer protected due to missing or failed disk unit"},
{0x066B8000, 0, IPR_DEFAULT_LOG_LEVEL,
"9071: Link operational transition"},
{0x066B8100, 0, IPR_DEFAULT_LOG_LEVEL,
"9072: Link not operational transition"},
{0x066B8200, 0, IPR_DEFAULT_LOG_LEVEL,
"9032: Array exposed but still protected"},
{0x066B8300, 0, IPR_DEFAULT_LOG_LEVEL + 1,
"70DD: Device forced failed by disrupt device command"},
{0x066B9100, 0, IPR_DEFAULT_LOG_LEVEL,
"4061: Multipath redundancy level got better"},
{0x066B9200, 0, IPR_DEFAULT_LOG_LEVEL,
"4060: Multipath redundancy level got worse"},
{0x07270000, 0, 0,
"Failure due to other device"},
{0x07278000, 0, IPR_DEFAULT_LOG_LEVEL,
"9008: IOA does not support functions expected by devices"},
{0x07278100, 0, IPR_DEFAULT_LOG_LEVEL,
"9010: Cache data associated with attached devices cannot be found"},
{0x07278200, 0, IPR_DEFAULT_LOG_LEVEL,
"9011: Cache data belongs to devices other than those attached"},
{0x07278400, 0, IPR_DEFAULT_LOG_LEVEL,
"9020: Array missing 2 or more devices with only 1 device present"},
{0x07278500, 0, IPR_DEFAULT_LOG_LEVEL,
"9021: Array missing 2 or more devices with 2 or more devices present"},
{0x07278600, 0, IPR_DEFAULT_LOG_LEVEL,
"9022: Exposed array is missing a required device"},
{0x07278700, 0, IPR_DEFAULT_LOG_LEVEL,
"9023: Array member(s) not at required physical locations"},
{0x07278800, 0, IPR_DEFAULT_LOG_LEVEL,
"9024: Array not functional due to present hardware configuration"},
{0x07278900, 0, IPR_DEFAULT_LOG_LEVEL,
"9026: Array not functional due to present hardware configuration"},
{0x07278A00, 0, IPR_DEFAULT_LOG_LEVEL,
"9027: Array is missing a device and parity is out of sync"},
{0x07278B00, 0, IPR_DEFAULT_LOG_LEVEL,
"9028: Maximum number of arrays already exist"},
{0x07278C00, 0, IPR_DEFAULT_LOG_LEVEL,
"9050: Required cache data cannot be located for a disk unit"},
{0x07278D00, 0, IPR_DEFAULT_LOG_LEVEL,
"9052: Cache data exists for a device that has been modified"},
{0x07278F00, 0, IPR_DEFAULT_LOG_LEVEL,
"9054: IOA resources not available due to previous problems"},
{0x07279100, 0, IPR_DEFAULT_LOG_LEVEL,
"9092: Disk unit requires initialization before use"},
{0x07279200, 0, IPR_DEFAULT_LOG_LEVEL,
"9029: Incorrect hardware configuration change has been detected"},
{0x07279600, 0, IPR_DEFAULT_LOG_LEVEL,
"9060: One or more disk pairs are missing from an array"},
{0x07279700, 0, IPR_DEFAULT_LOG_LEVEL,
"9061: One or more disks are missing from an array"},
{0x07279800, 0, IPR_DEFAULT_LOG_LEVEL,
"9062: One or more disks are missing from an array"},
{0x07279900, 0, IPR_DEFAULT_LOG_LEVEL,
"9063: Maximum number of functional arrays has been exceeded"},
{0x0B260000, 0, 0,
"Aborted command, invalid descriptor"},
{0x0B5A0000, 0, 0,
"Command terminated by host"}
};
static const struct ipr_ses_table_entry ipr_ses_table[] = {
{ "2104-DL1 ", "XXXXXXXXXXXXXXXX", 80 },
{ "2104-TL1 ", "XXXXXXXXXXXXXXXX", 80 },
{ "HSBP07M P U2SCSI", "XXXXXXXXXXXXXXXX", 80 }, /* Hidive 7 slot */
{ "HSBP05M P U2SCSI", "XXXXXXXXXXXXXXXX", 80 }, /* Hidive 5 slot */
{ "HSBP05M S U2SCSI", "XXXXXXXXXXXXXXXX", 80 }, /* Bowtie */
{ "HSBP06E ASU2SCSI", "XXXXXXXXXXXXXXXX", 80 }, /* MartinFenning */
{ "2104-DU3 ", "XXXXXXXXXXXXXXXX", 160 },
{ "2104-TU3 ", "XXXXXXXXXXXXXXXX", 160 },
{ "HSBP04C RSU2SCSI", "XXXXXXX*XXXXXXXX", 160 },
{ "HSBP06E RSU2SCSI", "XXXXXXX*XXXXXXXX", 160 },
{ "St V1S2 ", "XXXXXXXXXXXXXXXX", 160 },
{ "HSBPD4M PU3SCSI", "XXXXXXX*XXXXXXXX", 160 },
{ "VSBPD1H U3SCSI", "XXXXXXX*XXXXXXXX", 160 }
};
/*
* Function Prototypes
*/
static int ipr_reset_alert(struct ipr_cmnd *);
static void ipr_process_ccn(struct ipr_cmnd *);
static void ipr_process_error(struct ipr_cmnd *);
static void ipr_reset_ioa_job(struct ipr_cmnd *);
static void ipr_initiate_ioa_reset(struct ipr_ioa_cfg *,
enum ipr_shutdown_type);
#ifdef CONFIG_SCSI_IPR_TRACE
/**
* ipr_trc_hook - Add a trace entry to the driver trace
* @ipr_cmd: ipr command struct
* @type: trace type
* @add_data: additional data
*
* Return value:
* none
**/
static void ipr_trc_hook(struct ipr_cmnd *ipr_cmd,
u8 type, u32 add_data)
{
struct ipr_trace_entry *trace_entry;
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
trace_entry = &ioa_cfg->trace[ioa_cfg->trace_index++];
trace_entry->time = jiffies;
trace_entry->op_code = ipr_cmd->ioarcb.cmd_pkt.cdb[0];
trace_entry->type = type;
if (ipr_cmd->ioa_cfg->sis64)
trace_entry->ata_op_code = ipr_cmd->i.ata_ioadl.regs.command;
else
trace_entry->ata_op_code = ipr_cmd->ioarcb.u.add_data.u.regs.command;
trace_entry->cmd_index = ipr_cmd->cmd_index & 0xff;
trace_entry->res_handle = ipr_cmd->ioarcb.res_handle;
trace_entry->u.add_data = add_data;
}
#else
#define ipr_trc_hook(ipr_cmd, type, add_data) do { } while(0)
#endif
/**
* ipr_reinit_ipr_cmnd - Re-initialize an IPR Cmnd block for reuse
* @ipr_cmd: ipr command struct
*
* Return value:
* none
**/
static void ipr_reinit_ipr_cmnd(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
struct ipr_ioasa *ioasa = &ipr_cmd->s.ioasa;
struct ipr_ioasa64 *ioasa64 = &ipr_cmd->s.ioasa64;
dma_addr_t dma_addr = ipr_cmd->dma_addr;
memset(&ioarcb->cmd_pkt, 0, sizeof(struct ipr_cmd_pkt));
ioarcb->data_transfer_length = 0;
ioarcb->read_data_transfer_length = 0;
ioarcb->ioadl_len = 0;
ioarcb->read_ioadl_len = 0;
if (ipr_cmd->ioa_cfg->sis64) {
ioarcb->u.sis64_addr_data.data_ioadl_addr =
cpu_to_be64(dma_addr + offsetof(struct ipr_cmnd, i.ioadl64));
ioasa64->u.gata.status = 0;
} else {
ioarcb->write_ioadl_addr =
cpu_to_be32(dma_addr + offsetof(struct ipr_cmnd, i.ioadl));
ioarcb->read_ioadl_addr = ioarcb->write_ioadl_addr;
ioasa->u.gata.status = 0;
}
ioasa->hdr.ioasc = 0;
ioasa->hdr.residual_data_len = 0;
ipr_cmd->scsi_cmd = NULL;
ipr_cmd->qc = NULL;
ipr_cmd->sense_buffer[0] = 0;
ipr_cmd->dma_use_sg = 0;
}
/**
* ipr_init_ipr_cmnd - Initialize an IPR Cmnd block
* @ipr_cmd: ipr command struct
*
* Return value:
* none
**/
static void ipr_init_ipr_cmnd(struct ipr_cmnd *ipr_cmd)
{
ipr_reinit_ipr_cmnd(ipr_cmd);
ipr_cmd->u.scratch = 0;
ipr_cmd->sibling = NULL;
init_timer(&ipr_cmd->timer);
}
/**
* ipr_get_free_ipr_cmnd - Get a free IPR Cmnd block
* @ioa_cfg: ioa config struct
*
* Return value:
* pointer to ipr command struct
**/
static
struct ipr_cmnd *ipr_get_free_ipr_cmnd(struct ipr_ioa_cfg *ioa_cfg)
{
struct ipr_cmnd *ipr_cmd;
ipr_cmd = list_entry(ioa_cfg->free_q.next, struct ipr_cmnd, queue);
list_del(&ipr_cmd->queue);
ipr_init_ipr_cmnd(ipr_cmd);
return ipr_cmd;
}
/**
* ipr_mask_and_clear_interrupts - Mask all and clear specified interrupts
* @ioa_cfg: ioa config struct
* @clr_ints: interrupts to clear
*
* This function masks all interrupts on the adapter, then clears the
* interrupts specified in the mask
*
* Return value:
* none
**/
static void ipr_mask_and_clear_interrupts(struct ipr_ioa_cfg *ioa_cfg,
u32 clr_ints)
{
volatile u32 int_reg;
/* Stop new interrupts */
ioa_cfg->allow_interrupts = 0;
/* Set interrupt mask to stop all new interrupts */
if (ioa_cfg->sis64)
writeq(~0, ioa_cfg->regs.set_interrupt_mask_reg);
else
writel(~0, ioa_cfg->regs.set_interrupt_mask_reg);
/* Clear any pending interrupts */
if (ioa_cfg->sis64)
writel(~0, ioa_cfg->regs.clr_interrupt_reg);
writel(clr_ints, ioa_cfg->regs.clr_interrupt_reg32);
int_reg = readl(ioa_cfg->regs.sense_interrupt_reg);
}
/**
* ipr_save_pcix_cmd_reg - Save PCI-X command register
* @ioa_cfg: ioa config struct
*
* Return value:
* 0 on success / -EIO on failure
**/
static int ipr_save_pcix_cmd_reg(struct ipr_ioa_cfg *ioa_cfg)
{
int pcix_cmd_reg = pci_find_capability(ioa_cfg->pdev, PCI_CAP_ID_PCIX);
if (pcix_cmd_reg == 0)
return 0;
if (pci_read_config_word(ioa_cfg->pdev, pcix_cmd_reg + PCI_X_CMD,
&ioa_cfg->saved_pcix_cmd_reg) != PCIBIOS_SUCCESSFUL) {
dev_err(&ioa_cfg->pdev->dev, "Failed to save PCI-X command register\n");
return -EIO;
}
ioa_cfg->saved_pcix_cmd_reg |= PCI_X_CMD_DPERR_E | PCI_X_CMD_ERO;
return 0;
}
/**
* ipr_set_pcix_cmd_reg - Setup PCI-X command register
* @ioa_cfg: ioa config struct
*
* Return value:
* 0 on success / -EIO on failure
**/
static int ipr_set_pcix_cmd_reg(struct ipr_ioa_cfg *ioa_cfg)
{
int pcix_cmd_reg = pci_find_capability(ioa_cfg->pdev, PCI_CAP_ID_PCIX);
if (pcix_cmd_reg) {
if (pci_write_config_word(ioa_cfg->pdev, pcix_cmd_reg + PCI_X_CMD,
ioa_cfg->saved_pcix_cmd_reg) != PCIBIOS_SUCCESSFUL) {
dev_err(&ioa_cfg->pdev->dev, "Failed to setup PCI-X command register\n");
return -EIO;
}
}
return 0;
}
/**
* ipr_sata_eh_done - done function for aborted SATA commands
* @ipr_cmd: ipr command struct
*
* This function is invoked for ops generated to SATA
* devices which are being aborted.
*
* Return value:
* none
**/
static void ipr_sata_eh_done(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
struct ata_queued_cmd *qc = ipr_cmd->qc;
struct ipr_sata_port *sata_port = qc->ap->private_data;
qc->err_mask |= AC_ERR_OTHER;
sata_port->ioasa.status |= ATA_BUSY;
list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
ata_qc_complete(qc);
}
/**
* ipr_scsi_eh_done - mid-layer done function for aborted ops
* @ipr_cmd: ipr command struct
*
* This function is invoked by the interrupt handler for
* ops generated by the SCSI mid-layer which are being aborted.
*
* Return value:
* none
**/
static void ipr_scsi_eh_done(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd;
scsi_cmd->result |= (DID_ERROR << 16);
scsi_dma_unmap(ipr_cmd->scsi_cmd);
scsi_cmd->scsi_done(scsi_cmd);
list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
}
/**
* ipr_fail_all_ops - Fails all outstanding ops.
* @ioa_cfg: ioa config struct
*
* This function fails all outstanding ops.
*
* Return value:
* none
**/
static void ipr_fail_all_ops(struct ipr_ioa_cfg *ioa_cfg)
{
struct ipr_cmnd *ipr_cmd, *temp;
ENTER;
list_for_each_entry_safe(ipr_cmd, temp, &ioa_cfg->pending_q, queue) {
list_del(&ipr_cmd->queue);
ipr_cmd->s.ioasa.hdr.ioasc = cpu_to_be32(IPR_IOASC_IOA_WAS_RESET);
ipr_cmd->s.ioasa.hdr.ilid = cpu_to_be32(IPR_DRIVER_ILID);
if (ipr_cmd->scsi_cmd)
ipr_cmd->done = ipr_scsi_eh_done;
else if (ipr_cmd->qc)
ipr_cmd->done = ipr_sata_eh_done;
ipr_trc_hook(ipr_cmd, IPR_TRACE_FINISH, IPR_IOASC_IOA_WAS_RESET);
del_timer(&ipr_cmd->timer);
ipr_cmd->done(ipr_cmd);
}
LEAVE;
}
/**
* ipr_send_command - Send driver initiated requests.
* @ipr_cmd: ipr command struct
*
* This function sends a command to the adapter using the correct write call.
* In the case of sis64, calculate the ioarcb size required. Then or in the
* appropriate bits.
*
* Return value:
* none
**/
static void ipr_send_command(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
dma_addr_t send_dma_addr = ipr_cmd->dma_addr;
if (ioa_cfg->sis64) {
/* The default size is 256 bytes */
send_dma_addr |= 0x1;
/* If the number of ioadls * size of ioadl > 128 bytes,
then use a 512 byte ioarcb */
if (ipr_cmd->dma_use_sg * sizeof(struct ipr_ioadl64_desc) > 128 )
send_dma_addr |= 0x4;
writeq(send_dma_addr, ioa_cfg->regs.ioarrin_reg);
} else
writel(send_dma_addr, ioa_cfg->regs.ioarrin_reg);
}
/**
* ipr_do_req - Send driver initiated requests.
* @ipr_cmd: ipr command struct
* @done: done function
* @timeout_func: timeout function
* @timeout: timeout value
*
* This function sends the specified command to the adapter with the
* timeout given. The done function is invoked on command completion.
*
* Return value:
* none
**/
static void ipr_do_req(struct ipr_cmnd *ipr_cmd,
void (*done) (struct ipr_cmnd *),
void (*timeout_func) (struct ipr_cmnd *), u32 timeout)
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
list_add_tail(&ipr_cmd->queue, &ioa_cfg->pending_q);
ipr_cmd->done = done;
ipr_cmd->timer.data = (unsigned long) ipr_cmd;
ipr_cmd->timer.expires = jiffies + timeout;
ipr_cmd->timer.function = (void (*)(unsigned long))timeout_func;
add_timer(&ipr_cmd->timer);
ipr_trc_hook(ipr_cmd, IPR_TRACE_START, 0);
mb();
ipr_send_command(ipr_cmd);
}
/**
* ipr_internal_cmd_done - Op done function for an internally generated op.
* @ipr_cmd: ipr command struct
*
* This function is the op done function for an internally generated,
* blocking op. It simply wakes the sleeping thread.
*
* Return value:
* none
**/
static void ipr_internal_cmd_done(struct ipr_cmnd *ipr_cmd)
{
if (ipr_cmd->sibling)
ipr_cmd->sibling = NULL;
else
complete(&ipr_cmd->completion);
}
/**
* ipr_init_ioadl - initialize the ioadl for the correct SIS type
* @ipr_cmd: ipr command struct
* @dma_addr: dma address
* @len: transfer length
* @flags: ioadl flag value
*
* This function initializes an ioadl in the case where there is only a single
* descriptor.
*
* Return value:
* nothing
**/
static void ipr_init_ioadl(struct ipr_cmnd *ipr_cmd, dma_addr_t dma_addr,
u32 len, int flags)
{
struct ipr_ioadl_desc *ioadl = ipr_cmd->i.ioadl;
struct ipr_ioadl64_desc *ioadl64 = ipr_cmd->i.ioadl64;
ipr_cmd->dma_use_sg = 1;
if (ipr_cmd->ioa_cfg->sis64) {
ioadl64->flags = cpu_to_be32(flags);
ioadl64->data_len = cpu_to_be32(len);
ioadl64->address = cpu_to_be64(dma_addr);
ipr_cmd->ioarcb.ioadl_len =
cpu_to_be32(sizeof(struct ipr_ioadl64_desc));
ipr_cmd->ioarcb.data_transfer_length = cpu_to_be32(len);
} else {
ioadl->flags_and_data_len = cpu_to_be32(flags | len);
ioadl->address = cpu_to_be32(dma_addr);
if (flags == IPR_IOADL_FLAGS_READ_LAST) {
ipr_cmd->ioarcb.read_ioadl_len =
cpu_to_be32(sizeof(struct ipr_ioadl_desc));
ipr_cmd->ioarcb.read_data_transfer_length = cpu_to_be32(len);
} else {
ipr_cmd->ioarcb.ioadl_len =
cpu_to_be32(sizeof(struct ipr_ioadl_desc));
ipr_cmd->ioarcb.data_transfer_length = cpu_to_be32(len);
}
}
}
/**
* ipr_send_blocking_cmd - Send command and sleep on its completion.
* @ipr_cmd: ipr command struct
* @timeout_func: function to invoke if command times out
* @timeout: timeout
*
* Return value:
* none
**/
static void ipr_send_blocking_cmd(struct ipr_cmnd *ipr_cmd,
void (*timeout_func) (struct ipr_cmnd *ipr_cmd),
u32 timeout)
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
init_completion(&ipr_cmd->completion);
ipr_do_req(ipr_cmd, ipr_internal_cmd_done, timeout_func, timeout);
spin_unlock_irq(ioa_cfg->host->host_lock);
wait_for_completion(&ipr_cmd->completion);
spin_lock_irq(ioa_cfg->host->host_lock);
}
/**
* ipr_send_hcam - Send an HCAM to the adapter.
* @ioa_cfg: ioa config struct
* @type: HCAM type
* @hostrcb: hostrcb struct
*
* This function will send a Host Controlled Async command to the adapter.
* If HCAMs are currently not allowed to be issued to the adapter, it will
* place the hostrcb on the free queue.
*
* Return value:
* none
**/
static void ipr_send_hcam(struct ipr_ioa_cfg *ioa_cfg, u8 type,
struct ipr_hostrcb *hostrcb)
{
struct ipr_cmnd *ipr_cmd;
struct ipr_ioarcb *ioarcb;
if (ioa_cfg->allow_cmds) {
ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg);
list_add_tail(&ipr_cmd->queue, &ioa_cfg->pending_q);
list_add_tail(&hostrcb->queue, &ioa_cfg->hostrcb_pending_q);
ipr_cmd->u.hostrcb = hostrcb;
ioarcb = &ipr_cmd->ioarcb;
ioarcb->res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE);
ioarcb->cmd_pkt.request_type = IPR_RQTYPE_HCAM;
ioarcb->cmd_pkt.cdb[0] = IPR_HOST_CONTROLLED_ASYNC;
ioarcb->cmd_pkt.cdb[1] = type;
ioarcb->cmd_pkt.cdb[7] = (sizeof(hostrcb->hcam) >> 8) & 0xff;
ioarcb->cmd_pkt.cdb[8] = sizeof(hostrcb->hcam) & 0xff;
ipr_init_ioadl(ipr_cmd, hostrcb->hostrcb_dma,
sizeof(hostrcb->hcam), IPR_IOADL_FLAGS_READ_LAST);
if (type == IPR_HCAM_CDB_OP_CODE_CONFIG_CHANGE)
ipr_cmd->done = ipr_process_ccn;
else
ipr_cmd->done = ipr_process_error;
ipr_trc_hook(ipr_cmd, IPR_TRACE_START, IPR_IOA_RES_ADDR);
mb();
ipr_send_command(ipr_cmd);
} else {
list_add_tail(&hostrcb->queue, &ioa_cfg->hostrcb_free_q);
}
}
/**
* ipr_update_ata_class - Update the ata class in the resource entry
* @res: resource entry struct
* @proto: cfgte device bus protocol value
*
* Return value:
* none
**/
static void ipr_update_ata_class(struct ipr_resource_entry *res, unsigned int proto)
{
switch(proto) {
case IPR_PROTO_SATA:
case IPR_PROTO_SAS_STP:
res->ata_class = ATA_DEV_ATA;
break;
case IPR_PROTO_SATA_ATAPI:
case IPR_PROTO_SAS_STP_ATAPI:
res->ata_class = ATA_DEV_ATAPI;
break;
default:
res->ata_class = ATA_DEV_UNKNOWN;
break;
};
}
/**
* ipr_init_res_entry - Initialize a resource entry struct.
* @res: resource entry struct
* @cfgtew: config table entry wrapper struct
*
* Return value:
* none
**/
static void ipr_init_res_entry(struct ipr_resource_entry *res,
struct ipr_config_table_entry_wrapper *cfgtew)
{
int found = 0;
unsigned int proto;
struct ipr_ioa_cfg *ioa_cfg = res->ioa_cfg;
struct ipr_resource_entry *gscsi_res = NULL;
res->needs_sync_complete = 0;
res->in_erp = 0;
res->add_to_ml = 0;
res->del_from_ml = 0;
res->resetting_device = 0;
res->sdev = NULL;
res->sata_port = NULL;
if (ioa_cfg->sis64) {
proto = cfgtew->u.cfgte64->proto;
res->res_flags = cfgtew->u.cfgte64->res_flags;
res->qmodel = IPR_QUEUEING_MODEL64(res);
res->type = cfgtew->u.cfgte64->res_type;
memcpy(res->res_path, &cfgtew->u.cfgte64->res_path,
sizeof(res->res_path));
res->bus = 0;
res->lun = scsilun_to_int(&res->dev_lun);
if (res->type == IPR_RES_TYPE_GENERIC_SCSI) {
list_for_each_entry(gscsi_res, &ioa_cfg->used_res_q, queue) {
if (gscsi_res->dev_id == cfgtew->u.cfgte64->dev_id) {
found = 1;
res->target = gscsi_res->target;
break;
}
}
if (!found) {
res->target = find_first_zero_bit(ioa_cfg->target_ids,
ioa_cfg->max_devs_supported);
set_bit(res->target, ioa_cfg->target_ids);
}
memcpy(&res->dev_lun.scsi_lun, &cfgtew->u.cfgte64->lun,
sizeof(res->dev_lun.scsi_lun));
} else if (res->type == IPR_RES_TYPE_IOAFP) {
res->bus = IPR_IOAFP_VIRTUAL_BUS;
res->target = 0;
} else if (res->type == IPR_RES_TYPE_ARRAY) {
res->bus = IPR_ARRAY_VIRTUAL_BUS;
res->target = find_first_zero_bit(ioa_cfg->array_ids,
ioa_cfg->max_devs_supported);
set_bit(res->target, ioa_cfg->array_ids);
} else if (res->type == IPR_RES_TYPE_VOLUME_SET) {
res->bus = IPR_VSET_VIRTUAL_BUS;
res->target = find_first_zero_bit(ioa_cfg->vset_ids,
ioa_cfg->max_devs_supported);
set_bit(res->target, ioa_cfg->vset_ids);
} else {
res->target = find_first_zero_bit(ioa_cfg->target_ids,
ioa_cfg->max_devs_supported);
set_bit(res->target, ioa_cfg->target_ids);
}
} else {
proto = cfgtew->u.cfgte->proto;
res->qmodel = IPR_QUEUEING_MODEL(res);
res->flags = cfgtew->u.cfgte->flags;
if (res->flags & IPR_IS_IOA_RESOURCE)
res->type = IPR_RES_TYPE_IOAFP;
else
res->type = cfgtew->u.cfgte->rsvd_subtype & 0x0f;
res->bus = cfgtew->u.cfgte->res_addr.bus;
res->target = cfgtew->u.cfgte->res_addr.target;
res->lun = cfgtew->u.cfgte->res_addr.lun;
res->lun_wwn = get_unaligned_be64(cfgtew->u.cfgte->lun_wwn);
}
ipr_update_ata_class(res, proto);
}
/**
* ipr_is_same_device - Determine if two devices are the same.
* @res: resource entry struct
* @cfgtew: config table entry wrapper struct
*
* Return value:
* 1 if the devices are the same / 0 otherwise
**/
static int ipr_is_same_device(struct ipr_resource_entry *res,
struct ipr_config_table_entry_wrapper *cfgtew)
{
if (res->ioa_cfg->sis64) {
if (!memcmp(&res->dev_id, &cfgtew->u.cfgte64->dev_id,
sizeof(cfgtew->u.cfgte64->dev_id)) &&
!memcmp(&res->lun, &cfgtew->u.cfgte64->lun,
sizeof(cfgtew->u.cfgte64->lun))) {
return 1;
}
} else {
if (res->bus == cfgtew->u.cfgte->res_addr.bus &&
res->target == cfgtew->u.cfgte->res_addr.target &&
res->lun == cfgtew->u.cfgte->res_addr.lun)
return 1;
}
return 0;
}
/**
* ipr_format_res_path - Format the resource path for printing.
* @res_path: resource path
* @buf: buffer
*
* Return value:
* pointer to buffer
**/
static char *ipr_format_res_path(u8 *res_path, char *buffer, int len)
{
int i;
char *p = buffer;
*p = '\0';
p += snprintf(p, buffer + len - p, "%02X", res_path[0]);
for (i = 1; res_path[i] != 0xff && ((i * 3) < len); i++)
p += snprintf(p, buffer + len - p, "-%02X", res_path[i]);
return buffer;
}
/**
* ipr_update_res_entry - Update the resource entry.
* @res: resource entry struct
* @cfgtew: config table entry wrapper struct
*
* Return value:
* none
**/
static void ipr_update_res_entry(struct ipr_resource_entry *res,
struct ipr_config_table_entry_wrapper *cfgtew)
{
char buffer[IPR_MAX_RES_PATH_LENGTH];
unsigned int proto;
int new_path = 0;
if (res->ioa_cfg->sis64) {
res->flags = cfgtew->u.cfgte64->flags;
res->res_flags = cfgtew->u.cfgte64->res_flags;
res->type = cfgtew->u.cfgte64->res_type;
memcpy(&res->std_inq_data, &cfgtew->u.cfgte64->std_inq_data,
sizeof(struct ipr_std_inq_data));
res->qmodel = IPR_QUEUEING_MODEL64(res);
proto = cfgtew->u.cfgte64->proto;
res->res_handle = cfgtew->u.cfgte64->res_handle;
res->dev_id = cfgtew->u.cfgte64->dev_id;
memcpy(&res->dev_lun.scsi_lun, &cfgtew->u.cfgte64->lun,
sizeof(res->dev_lun.scsi_lun));
if (memcmp(res->res_path, &cfgtew->u.cfgte64->res_path,
sizeof(res->res_path))) {
memcpy(res->res_path, &cfgtew->u.cfgte64->res_path,
sizeof(res->res_path));
new_path = 1;
}
if (res->sdev && new_path)
sdev_printk(KERN_INFO, res->sdev, "Resource path: %s\n",
ipr_format_res_path(res->res_path, buffer,
sizeof(buffer)));
} else {
res->flags = cfgtew->u.cfgte->flags;
if (res->flags & IPR_IS_IOA_RESOURCE)
res->type = IPR_RES_TYPE_IOAFP;
else
res->type = cfgtew->u.cfgte->rsvd_subtype & 0x0f;
memcpy(&res->std_inq_data, &cfgtew->u.cfgte->std_inq_data,
sizeof(struct ipr_std_inq_data));
res->qmodel = IPR_QUEUEING_MODEL(res);
proto = cfgtew->u.cfgte->proto;
res->res_handle = cfgtew->u.cfgte->res_handle;
}
ipr_update_ata_class(res, proto);
}
/**
* ipr_clear_res_target - Clear the bit in the bit map representing the target
* for the resource.
* @res: resource entry struct
* @cfgtew: config table entry wrapper struct
*
* Return value:
* none
**/
static void ipr_clear_res_target(struct ipr_resource_entry *res)
{
struct ipr_resource_entry *gscsi_res = NULL;
struct ipr_ioa_cfg *ioa_cfg = res->ioa_cfg;
if (!ioa_cfg->sis64)
return;
if (res->bus == IPR_ARRAY_VIRTUAL_BUS)
clear_bit(res->target, ioa_cfg->array_ids);
else if (res->bus == IPR_VSET_VIRTUAL_BUS)
clear_bit(res->target, ioa_cfg->vset_ids);
else if (res->bus == 0 && res->type == IPR_RES_TYPE_GENERIC_SCSI) {
list_for_each_entry(gscsi_res, &ioa_cfg->used_res_q, queue)
if (gscsi_res->dev_id == res->dev_id && gscsi_res != res)
return;
clear_bit(res->target, ioa_cfg->target_ids);
} else if (res->bus == 0)
clear_bit(res->target, ioa_cfg->target_ids);
}
/**
* ipr_handle_config_change - Handle a config change from the adapter
* @ioa_cfg: ioa config struct
* @hostrcb: hostrcb
*
* Return value:
* none
**/
static void ipr_handle_config_change(struct ipr_ioa_cfg *ioa_cfg,
struct ipr_hostrcb *hostrcb)
{
struct ipr_resource_entry *res = NULL;
struct ipr_config_table_entry_wrapper cfgtew;
__be32 cc_res_handle;
u32 is_ndn = 1;
if (ioa_cfg->sis64) {
cfgtew.u.cfgte64 = &hostrcb->hcam.u.ccn.u.cfgte64;
cc_res_handle = cfgtew.u.cfgte64->res_handle;
} else {
cfgtew.u.cfgte = &hostrcb->hcam.u.ccn.u.cfgte;
cc_res_handle = cfgtew.u.cfgte->res_handle;
}
list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
if (res->res_handle == cc_res_handle) {
is_ndn = 0;
break;
}
}
if (is_ndn) {
if (list_empty(&ioa_cfg->free_res_q)) {
ipr_send_hcam(ioa_cfg,
IPR_HCAM_CDB_OP_CODE_CONFIG_CHANGE,
hostrcb);
return;
}
res = list_entry(ioa_cfg->free_res_q.next,
struct ipr_resource_entry, queue);
list_del(&res->queue);
ipr_init_res_entry(res, &cfgtew);
list_add_tail(&res->queue, &ioa_cfg->used_res_q);
}
ipr_update_res_entry(res, &cfgtew);
if (hostrcb->hcam.notify_type == IPR_HOST_RCB_NOTIF_TYPE_REM_ENTRY) {
if (res->sdev) {
res->del_from_ml = 1;
res->res_handle = IPR_INVALID_RES_HANDLE;
if (ioa_cfg->allow_ml_add_del)
schedule_work(&ioa_cfg->work_q);
} else {
ipr_clear_res_target(res);
list_move_tail(&res->queue, &ioa_cfg->free_res_q);
}
} else if (!res->sdev) {
res->add_to_ml = 1;
if (ioa_cfg->allow_ml_add_del)
schedule_work(&ioa_cfg->work_q);
}
ipr_send_hcam(ioa_cfg, IPR_HCAM_CDB_OP_CODE_CONFIG_CHANGE, hostrcb);
}
/**
* ipr_process_ccn - Op done function for a CCN.
* @ipr_cmd: ipr command struct
*
* This function is the op done function for a configuration
* change notification host controlled async from the adapter.
*
* Return value:
* none
**/
static void ipr_process_ccn(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
struct ipr_hostrcb *hostrcb = ipr_cmd->u.hostrcb;
u32 ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc);
list_del(&hostrcb->queue);
list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
if (ioasc) {
if (ioasc != IPR_IOASC_IOA_WAS_RESET)
dev_err(&ioa_cfg->pdev->dev,
"Host RCB failed with IOASC: 0x%08X\n", ioasc);
ipr_send_hcam(ioa_cfg, IPR_HCAM_CDB_OP_CODE_CONFIG_CHANGE, hostrcb);
} else {
ipr_handle_config_change(ioa_cfg, hostrcb);
}
}
/**
* strip_and_pad_whitespace - Strip and pad trailing whitespace.
* @i: index into buffer
* @buf: string to modify
*
* This function will strip all trailing whitespace, pad the end
* of the string with a single space, and NULL terminate the string.
*
* Return value:
* new length of string
**/
static int strip_and_pad_whitespace(int i, char *buf)
{
while (i && buf[i] == ' ')
i--;
buf[i+1] = ' ';
buf[i+2] = '\0';
return i + 2;
}
/**
* ipr_log_vpd_compact - Log the passed extended VPD compactly.
* @prefix: string to print at start of printk
* @hostrcb: hostrcb pointer
* @vpd: vendor/product id/sn struct
*
* Return value:
* none
**/
static void ipr_log_vpd_compact(char *prefix, struct ipr_hostrcb *hostrcb,
struct ipr_vpd *vpd)
{
char buffer[IPR_VENDOR_ID_LEN + IPR_PROD_ID_LEN + IPR_SERIAL_NUM_LEN + 3];
int i = 0;
memcpy(buffer, vpd->vpids.vendor_id, IPR_VENDOR_ID_LEN);
i = strip_and_pad_whitespace(IPR_VENDOR_ID_LEN - 1, buffer);
memcpy(&buffer[i], vpd->vpids.product_id, IPR_PROD_ID_LEN);
i = strip_and_pad_whitespace(i + IPR_PROD_ID_LEN - 1, buffer);
memcpy(&buffer[i], vpd->sn, IPR_SERIAL_NUM_LEN);
buffer[IPR_SERIAL_NUM_LEN + i] = '\0';
ipr_hcam_err(hostrcb, "%s VPID/SN: %s\n", prefix, buffer);
}
/**
* ipr_log_vpd - Log the passed VPD to the error log.
* @vpd: vendor/product id/sn struct
*
* Return value:
* none
**/
static void ipr_log_vpd(struct ipr_vpd *vpd)
{
char buffer[IPR_VENDOR_ID_LEN + IPR_PROD_ID_LEN
+ IPR_SERIAL_NUM_LEN];
memcpy(buffer, vpd->vpids.vendor_id, IPR_VENDOR_ID_LEN);
memcpy(buffer + IPR_VENDOR_ID_LEN, vpd->vpids.product_id,
IPR_PROD_ID_LEN);
buffer[IPR_VENDOR_ID_LEN + IPR_PROD_ID_LEN] = '\0';
ipr_err("Vendor/Product ID: %s\n", buffer);
memcpy(buffer, vpd->sn, IPR_SERIAL_NUM_LEN);
buffer[IPR_SERIAL_NUM_LEN] = '\0';
ipr_err(" Serial Number: %s\n", buffer);
}
/**
* ipr_log_ext_vpd_compact - Log the passed extended VPD compactly.
* @prefix: string to print at start of printk
* @hostrcb: hostrcb pointer
* @vpd: vendor/product id/sn/wwn struct
*
* Return value:
* none
**/
static void ipr_log_ext_vpd_compact(char *prefix, struct ipr_hostrcb *hostrcb,
struct ipr_ext_vpd *vpd)
{
ipr_log_vpd_compact(prefix, hostrcb, &vpd->vpd);
ipr_hcam_err(hostrcb, "%s WWN: %08X%08X\n", prefix,
be32_to_cpu(vpd->wwid[0]), be32_to_cpu(vpd->wwid[1]));
}
/**
* ipr_log_ext_vpd - Log the passed extended VPD to the error log.
* @vpd: vendor/product id/sn/wwn struct
*
* Return value:
* none
**/
static void ipr_log_ext_vpd(struct ipr_ext_vpd *vpd)
{
ipr_log_vpd(&vpd->vpd);
ipr_err(" WWN: %08X%08X\n", be32_to_cpu(vpd->wwid[0]),
be32_to_cpu(vpd->wwid[1]));
}
/**
* ipr_log_enhanced_cache_error - Log a cache error.
* @ioa_cfg: ioa config struct
* @hostrcb: hostrcb struct
*
* Return value:
* none
**/
static void ipr_log_enhanced_cache_error(struct ipr_ioa_cfg *ioa_cfg,
struct ipr_hostrcb *hostrcb)
{
struct ipr_hostrcb_type_12_error *error;
if (ioa_cfg->sis64)
error = &hostrcb->hcam.u.error64.u.type_12_error;
else
error = &hostrcb->hcam.u.error.u.type_12_error;
ipr_err("-----Current Configuration-----\n");
ipr_err("Cache Directory Card Information:\n");
ipr_log_ext_vpd(&error->ioa_vpd);
ipr_err("Adapter Card Information:\n");
ipr_log_ext_vpd(&error->cfc_vpd);
ipr_err("-----Expected Configuration-----\n");
ipr_err("Cache Directory Card Information:\n");
ipr_log_ext_vpd(&error->ioa_last_attached_to_cfc_vpd);
ipr_err("Adapter Card Information:\n");
ipr_log_ext_vpd(&error->cfc_last_attached_to_ioa_vpd);
ipr_err("Additional IOA Data: %08X %08X %08X\n",
be32_to_cpu(error->ioa_data[0]),
be32_to_cpu(error->ioa_data[1]),
be32_to_cpu(error->ioa_data[2]));
}
/**
* ipr_log_cache_error - Log a cache error.
* @ioa_cfg: ioa config struct
* @hostrcb: hostrcb struct
*
* Return value:
* none
**/
static void ipr_log_cache_error(struct ipr_ioa_cfg *ioa_cfg,
struct ipr_hostrcb *hostrcb)
{
struct ipr_hostrcb_type_02_error *error =
&hostrcb->hcam.u.error.u.type_02_error;
ipr_err("-----Current Configuration-----\n");
ipr_err("Cache Directory Card Information:\n");
ipr_log_vpd(&error->ioa_vpd);
ipr_err("Adapter Card Information:\n");
ipr_log_vpd(&error->cfc_vpd);
ipr_err("-----Expected Configuration-----\n");
ipr_err("Cache Directory Card Information:\n");
ipr_log_vpd(&error->ioa_last_attached_to_cfc_vpd);
ipr_err("Adapter Card Information:\n");
ipr_log_vpd(&error->cfc_last_attached_to_ioa_vpd);
ipr_err("Additional IOA Data: %08X %08X %08X\n",
be32_to_cpu(error->ioa_data[0]),
be32_to_cpu(error->ioa_data[1]),
be32_to_cpu(error->ioa_data[2]));
}
/**
* ipr_log_enhanced_config_error - Log a configuration error.
* @ioa_cfg: ioa config struct
* @hostrcb: hostrcb struct
*
* Return value:
* none
**/
static void ipr_log_enhanced_config_error(struct ipr_ioa_cfg *ioa_cfg,
struct ipr_hostrcb *hostrcb)
{
int errors_logged, i;
struct ipr_hostrcb_device_data_entry_enhanced *dev_entry;
struct ipr_hostrcb_type_13_error *error;
error = &hostrcb->hcam.u.error.u.type_13_error;
errors_logged = be32_to_cpu(error->errors_logged);
ipr_err("Device Errors Detected/Logged: %d/%d\n",
be32_to_cpu(error->errors_detected), errors_logged);
dev_entry = error->dev;
for (i = 0; i < errors_logged; i++, dev_entry++) {
ipr_err_separator;
ipr_phys_res_err(ioa_cfg, dev_entry->dev_res_addr, "Device %d", i + 1);
ipr_log_ext_vpd(&dev_entry->vpd);
ipr_err("-----New Device Information-----\n");
ipr_log_ext_vpd(&dev_entry->new_vpd);
ipr_err("Cache Directory Card Information:\n");
ipr_log_ext_vpd(&dev_entry->ioa_last_with_dev_vpd);
ipr_err("Adapter Card Information:\n");
ipr_log_ext_vpd(&dev_entry->cfc_last_with_dev_vpd);
}
}
/**
* ipr_log_sis64_config_error - Log a device error.
* @ioa_cfg: ioa config struct
* @hostrcb: hostrcb struct
*
* Return value:
* none
**/
static void ipr_log_sis64_config_error(struct ipr_ioa_cfg *ioa_cfg,
struct ipr_hostrcb *hostrcb)
{
int errors_logged, i;
struct ipr_hostrcb64_device_data_entry_enhanced *dev_entry;
struct ipr_hostrcb_type_23_error *error;
char buffer[IPR_MAX_RES_PATH_LENGTH];
error = &hostrcb->hcam.u.error64.u.type_23_error;
errors_logged = be32_to_cpu(error->errors_logged);
ipr_err("Device Errors Detected/Logged: %d/%d\n",
be32_to_cpu(error->errors_detected), errors_logged);
dev_entry = error->dev;
for (i = 0; i < errors_logged; i++, dev_entry++) {
ipr_err_separator;
ipr_err("Device %d : %s", i + 1,
ipr_format_res_path(dev_entry->res_path, buffer,
sizeof(buffer)));
ipr_log_ext_vpd(&dev_entry->vpd);
ipr_err("-----New Device Information-----\n");
ipr_log_ext_vpd(&dev_entry->new_vpd);
ipr_err("Cache Directory Card Information:\n");
ipr_log_ext_vpd(&dev_entry->ioa_last_with_dev_vpd);
ipr_err("Adapter Card Information:\n");
ipr_log_ext_vpd(&dev_entry->cfc_last_with_dev_vpd);
}
}
/**
* ipr_log_config_error - Log a configuration error.
* @ioa_cfg: ioa config struct
* @hostrcb: hostrcb struct
*
* Return value:
* none
**/
static void ipr_log_config_error(struct ipr_ioa_cfg *ioa_cfg,
struct ipr_hostrcb *hostrcb)
{
int errors_logged, i;
struct ipr_hostrcb_device_data_entry *dev_entry;
struct ipr_hostrcb_type_03_error *error;
error = &hostrcb->hcam.u.error.u.type_03_error;
errors_logged = be32_to_cpu(error->errors_logged);
ipr_err("Device Errors Detected/Logged: %d/%d\n",
be32_to_cpu(error->errors_detected), errors_logged);
dev_entry = error->dev;
for (i = 0; i < errors_logged; i++, dev_entry++) {
ipr_err_separator;
ipr_phys_res_err(ioa_cfg, dev_entry->dev_res_addr, "Device %d", i + 1);
ipr_log_vpd(&dev_entry->vpd);
ipr_err("-----New Device Information-----\n");
ipr_log_vpd(&dev_entry->new_vpd);
ipr_err("Cache Directory Card Information:\n");
ipr_log_vpd(&dev_entry->ioa_last_with_dev_vpd);
ipr_err("Adapter Card Information:\n");
ipr_log_vpd(&dev_entry->cfc_last_with_dev_vpd);
ipr_err("Additional IOA Data: %08X %08X %08X %08X %08X\n",
be32_to_cpu(dev_entry->ioa_data[0]),
be32_to_cpu(dev_entry->ioa_data[1]),
be32_to_cpu(dev_entry->ioa_data[2]),
be32_to_cpu(dev_entry->ioa_data[3]),
be32_to_cpu(dev_entry->ioa_data[4]));
}
}
/**
* ipr_log_enhanced_array_error - Log an array configuration error.
* @ioa_cfg: ioa config struct
* @hostrcb: hostrcb struct
*
* Return value:
* none
**/
static void ipr_log_enhanced_array_error(struct ipr_ioa_cfg *ioa_cfg,
struct ipr_hostrcb *hostrcb)
{
int i, num_entries;
struct ipr_hostrcb_type_14_error *error;
struct ipr_hostrcb_array_data_entry_enhanced *array_entry;
const u8 zero_sn[IPR_SERIAL_NUM_LEN] = { [0 ... IPR_SERIAL_NUM_LEN-1] = '0' };
error = &hostrcb->hcam.u.error.u.type_14_error;
ipr_err_separator;
ipr_err("RAID %s Array Configuration: %d:%d:%d:%d\n",
error->protection_level,
ioa_cfg->host->host_no,
error->last_func_vset_res_addr.bus,
error->last_func_vset_res_addr.target,
error->last_func_vset_res_addr.lun);
ipr_err_separator;
array_entry = error->array_member;
num_entries = min_t(u32, be32_to_cpu(error->num_entries),
sizeof(error->array_member));
for (i = 0; i < num_entries; i++, array_entry++) {
if (!memcmp(array_entry->vpd.vpd.sn, zero_sn, IPR_SERIAL_NUM_LEN))
continue;
if (be32_to_cpu(error->exposed_mode_adn) == i)
ipr_err("Exposed Array Member %d:\n", i);
else
ipr_err("Array Member %d:\n", i);
ipr_log_ext_vpd(&array_entry->vpd);
ipr_phys_res_err(ioa_cfg, array_entry->dev_res_addr, "Current Location");
ipr_phys_res_err(ioa_cfg, array_entry->expected_dev_res_addr,
"Expected Location");
ipr_err_separator;
}
}
/**
* ipr_log_array_error - Log an array configuration error.
* @ioa_cfg: ioa config struct
* @hostrcb: hostrcb struct
*
* Return value:
* none
**/
static void ipr_log_array_error(struct ipr_ioa_cfg *ioa_cfg,
struct ipr_hostrcb *hostrcb)
{
int i;
struct ipr_hostrcb_type_04_error *error;
struct ipr_hostrcb_array_data_entry *array_entry;
const u8 zero_sn[IPR_SERIAL_NUM_LEN] = { [0 ... IPR_SERIAL_NUM_LEN-1] = '0' };
error = &hostrcb->hcam.u.error.u.type_04_error;
ipr_err_separator;
ipr_err("RAID %s Array Configuration: %d:%d:%d:%d\n",
error->protection_level,
ioa_cfg->host->host_no,
error->last_func_vset_res_addr.bus,
error->last_func_vset_res_addr.target,
error->last_func_vset_res_addr.lun);
ipr_err_separator;
array_entry = error->array_member;
for (i = 0; i < 18; i++) {
if (!memcmp(array_entry->vpd.sn, zero_sn, IPR_SERIAL_NUM_LEN))
continue;
if (be32_to_cpu(error->exposed_mode_adn) == i)
ipr_err("Exposed Array Member %d:\n", i);
else
ipr_err("Array Member %d:\n", i);
ipr_log_vpd(&array_entry->vpd);
ipr_phys_res_err(ioa_cfg, array_entry->dev_res_addr, "Current Location");
ipr_phys_res_err(ioa_cfg, array_entry->expected_dev_res_addr,
"Expected Location");
ipr_err_separator;
if (i == 9)
array_entry = error->array_member2;
else
array_entry++;
}
}
/**
* ipr_log_hex_data - Log additional hex IOA error data.
* @ioa_cfg: ioa config struct
* @data: IOA error data
* @len: data length
*
* Return value:
* none
**/
static void ipr_log_hex_data(struct ipr_ioa_cfg *ioa_cfg, u32 *data, int len)
{
int i;
if (len == 0)
return;
if (ioa_cfg->log_level <= IPR_DEFAULT_LOG_LEVEL)
len = min_t(int, len, IPR_DEFAULT_MAX_ERROR_DUMP);
for (i = 0; i < len / 4; i += 4) {
ipr_err("%08X: %08X %08X %08X %08X\n", i*4,
be32_to_cpu(data[i]),
be32_to_cpu(data[i+1]),
be32_to_cpu(data[i+2]),
be32_to_cpu(data[i+3]));
}
}
/**
* ipr_log_enhanced_dual_ioa_error - Log an enhanced dual adapter error.
* @ioa_cfg: ioa config struct
* @hostrcb: hostrcb struct
*
* Return value:
* none
**/
static void ipr_log_enhanced_dual_ioa_error(struct ipr_ioa_cfg *ioa_cfg,
struct ipr_hostrcb *hostrcb)
{
struct ipr_hostrcb_type_17_error *error;
if (ioa_cfg->sis64)
error = &hostrcb->hcam.u.error64.u.type_17_error;
else
error = &hostrcb->hcam.u.error.u.type_17_error;
error->failure_reason[sizeof(error->failure_reason) - 1] = '\0';
strim(error->failure_reason);
ipr_hcam_err(hostrcb, "%s [PRC: %08X]\n", error->failure_reason,
be32_to_cpu(hostrcb->hcam.u.error.prc));
ipr_log_ext_vpd_compact("Remote IOA", hostrcb, &error->vpd);
ipr_log_hex_data(ioa_cfg, error->data,
be32_to_cpu(hostrcb->hcam.length) -
(offsetof(struct ipr_hostrcb_error, u) +
offsetof(struct ipr_hostrcb_type_17_error, data)));
}
/**
* ipr_log_dual_ioa_error - Log a dual adapter error.
* @ioa_cfg: ioa config struct
* @hostrcb: hostrcb struct
*
* Return value:
* none
**/
static void ipr_log_dual_ioa_error(struct ipr_ioa_cfg *ioa_cfg,
struct ipr_hostrcb *hostrcb)
{
struct ipr_hostrcb_type_07_error *error;
error = &hostrcb->hcam.u.error.u.type_07_error;
error->failure_reason[sizeof(error->failure_reason) - 1] = '\0';
strim(error->failure_reason);
ipr_hcam_err(hostrcb, "%s [PRC: %08X]\n", error->failure_reason,
be32_to_cpu(hostrcb->hcam.u.error.prc));
ipr_log_vpd_compact("Remote IOA", hostrcb, &error->vpd);
ipr_log_hex_data(ioa_cfg, error->data,
be32_to_cpu(hostrcb->hcam.length) -
(offsetof(struct ipr_hostrcb_error, u) +
offsetof(struct ipr_hostrcb_type_07_error, data)));
}
static const struct {
u8 active;
char *desc;
} path_active_desc[] = {
{ IPR_PATH_NO_INFO, "Path" },
{ IPR_PATH_ACTIVE, "Active path" },
{ IPR_PATH_NOT_ACTIVE, "Inactive path" }
};
static const struct {
u8 state;
char *desc;
} path_state_desc[] = {
{ IPR_PATH_STATE_NO_INFO, "has no path state information available" },
{ IPR_PATH_HEALTHY, "is healthy" },
{ IPR_PATH_DEGRADED, "is degraded" },
{ IPR_PATH_FAILED, "is failed" }
};
/**
* ipr_log_fabric_path - Log a fabric path error
* @hostrcb: hostrcb struct
* @fabric: fabric descriptor
*
* Return value:
* none
**/
static void ipr_log_fabric_path(struct ipr_hostrcb *hostrcb,
struct ipr_hostrcb_fabric_desc *fabric)
{
int i, j;
u8 path_state = fabric->path_state;
u8 active = path_state & IPR_PATH_ACTIVE_MASK;
u8 state = path_state & IPR_PATH_STATE_MASK;
for (i = 0; i < ARRAY_SIZE(path_active_desc); i++) {
if (path_active_desc[i].active != active)
continue;
for (j = 0; j < ARRAY_SIZE(path_state_desc); j++) {
if (path_state_desc[j].state != state)
continue;
if (fabric->cascaded_expander == 0xff && fabric->phy == 0xff) {
ipr_hcam_err(hostrcb, "%s %s: IOA Port=%d\n",
path_active_desc[i].desc, path_state_desc[j].desc,
fabric->ioa_port);
} else if (fabric->cascaded_expander == 0xff) {
ipr_hcam_err(hostrcb, "%s %s: IOA Port=%d, Phy=%d\n",
path_active_desc[i].desc, path_state_desc[j].desc,
fabric->ioa_port, fabric->phy);
} else if (fabric->phy == 0xff) {
ipr_hcam_err(hostrcb, "%s %s: IOA Port=%d, Cascade=%d\n",
path_active_desc[i].desc, path_state_desc[j].desc,
fabric->ioa_port, fabric->cascaded_expander);
} else {
ipr_hcam_err(hostrcb, "%s %s: IOA Port=%d, Cascade=%d, Phy=%d\n",
path_active_desc[i].desc, path_state_desc[j].desc,
fabric->ioa_port, fabric->cascaded_expander, fabric->phy);
}
return;
}
}
ipr_err("Path state=%02X IOA Port=%d Cascade=%d Phy=%d\n", path_state,
fabric->ioa_port, fabric->cascaded_expander, fabric->phy);
}
/**
* ipr_log64_fabric_path - Log a fabric path error
* @hostrcb: hostrcb struct
* @fabric: fabric descriptor
*
* Return value:
* none
**/
static void ipr_log64_fabric_path(struct ipr_hostrcb *hostrcb,
struct ipr_hostrcb64_fabric_desc *fabric)
{
int i, j;
u8 path_state = fabric->path_state;
u8 active = path_state & IPR_PATH_ACTIVE_MASK;
u8 state = path_state & IPR_PATH_STATE_MASK;
char buffer[IPR_MAX_RES_PATH_LENGTH];
for (i = 0; i < ARRAY_SIZE(path_active_desc); i++) {
if (path_active_desc[i].active != active)
continue;
for (j = 0; j < ARRAY_SIZE(path_state_desc); j++) {
if (path_state_desc[j].state != state)
continue;
ipr_hcam_err(hostrcb, "%s %s: Resource Path=%s\n",
path_active_desc[i].desc, path_state_desc[j].desc,
ipr_format_res_path(fabric->res_path, buffer,
sizeof(buffer)));
return;
}
}
ipr_err("Path state=%02X Resource Path=%s\n", path_state,
ipr_format_res_path(fabric->res_path, buffer, sizeof(buffer)));
}
static const struct {
u8 type;
char *desc;
} path_type_desc[] = {
{ IPR_PATH_CFG_IOA_PORT, "IOA port" },
{ IPR_PATH_CFG_EXP_PORT, "Expander port" },
{ IPR_PATH_CFG_DEVICE_PORT, "Device port" },
{ IPR_PATH_CFG_DEVICE_LUN, "Device LUN" }
};
static const struct {
u8 status;
char *desc;
} path_status_desc[] = {
{ IPR_PATH_CFG_NO_PROB, "Functional" },
{ IPR_PATH_CFG_DEGRADED, "Degraded" },
{ IPR_PATH_CFG_FAILED, "Failed" },
{ IPR_PATH_CFG_SUSPECT, "Suspect" },
{ IPR_PATH_NOT_DETECTED, "Missing" },
{ IPR_PATH_INCORRECT_CONN, "Incorrectly connected" }
};
static const char *link_rate[] = {
"unknown",
"disabled",
"phy reset problem",
"spinup hold",
"port selector",
"unknown",
"unknown",
"unknown",
"1.5Gbps",
"3.0Gbps",
"unknown",
"unknown",
"unknown",
"unknown",
"unknown",
"unknown"
};
/**
* ipr_log_path_elem - Log a fabric path element.
* @hostrcb: hostrcb struct
* @cfg: fabric path element struct
*
* Return value:
* none
**/
static void ipr_log_path_elem(struct ipr_hostrcb *hostrcb,
struct ipr_hostrcb_config_element *cfg)
{
int i, j;
u8 type = cfg->type_status & IPR_PATH_CFG_TYPE_MASK;
u8 status = cfg->type_status & IPR_PATH_CFG_STATUS_MASK;
if (type == IPR_PATH_CFG_NOT_EXIST)
return;
for (i = 0; i < ARRAY_SIZE(path_type_desc); i++) {
if (path_type_desc[i].type != type)
continue;
for (j = 0; j < ARRAY_SIZE(path_status_desc); j++) {
if (path_status_desc[j].status != status)
continue;
if (type == IPR_PATH_CFG_IOA_PORT) {
ipr_hcam_err(hostrcb, "%s %s: Phy=%d, Link rate=%s, WWN=%08X%08X\n",
path_status_desc[j].desc, path_type_desc[i].desc,
cfg->phy, link_rate[cfg->link_rate & IPR_PHY_LINK_RATE_MASK],
be32_to_cpu(cfg->wwid[0]), be32_to_cpu(cfg->wwid[1]));
} else {
if (cfg->cascaded_expander == 0xff && cfg->phy == 0xff) {
ipr_hcam_err(hostrcb, "%s %s: Link rate=%s, WWN=%08X%08X\n",
path_status_desc[j].desc, path_type_desc[i].desc,
link_rate[cfg->link_rate & IPR_PHY_LINK_RATE_MASK],
be32_to_cpu(cfg->wwid[0]), be32_to_cpu(cfg->wwid[1]));
} else if (cfg->cascaded_expander == 0xff) {
ipr_hcam_err(hostrcb, "%s %s: Phy=%d, Link rate=%s, "
"WWN=%08X%08X\n", path_status_desc[j].desc,
path_type_desc[i].desc, cfg->phy,
link_rate[cfg->link_rate & IPR_PHY_LINK_RATE_MASK],
be32_to_cpu(cfg->wwid[0]), be32_to_cpu(cfg->wwid[1]));
} else if (cfg->phy == 0xff) {
ipr_hcam_err(hostrcb, "%s %s: Cascade=%d, Link rate=%s, "
"WWN=%08X%08X\n", path_status_desc[j].desc,
path_type_desc[i].desc, cfg->cascaded_expander,
link_rate[cfg->link_rate & IPR_PHY_LINK_RATE_MASK],
be32_to_cpu(cfg->wwid[0]), be32_to_cpu(cfg->wwid[1]));
} else {
ipr_hcam_err(hostrcb, "%s %s: Cascade=%d, Phy=%d, Link rate=%s "
"WWN=%08X%08X\n", path_status_desc[j].desc,
path_type_desc[i].desc, cfg->cascaded_expander, cfg->phy,
link_rate[cfg->link_rate & IPR_PHY_LINK_RATE_MASK],
be32_to_cpu(cfg->wwid[0]), be32_to_cpu(cfg->wwid[1]));
}
}
return;
}
}
ipr_hcam_err(hostrcb, "Path element=%02X: Cascade=%d Phy=%d Link rate=%s "
"WWN=%08X%08X\n", cfg->type_status, cfg->cascaded_expander, cfg->phy,
link_rate[cfg->link_rate & IPR_PHY_LINK_RATE_MASK],
be32_to_cpu(cfg->wwid[0]), be32_to_cpu(cfg->wwid[1]));
}
/**
* ipr_log64_path_elem - Log a fabric path element.
* @hostrcb: hostrcb struct
* @cfg: fabric path element struct
*
* Return value:
* none
**/
static void ipr_log64_path_elem(struct ipr_hostrcb *hostrcb,
struct ipr_hostrcb64_config_element *cfg)
{
int i, j;
u8 desc_id = cfg->descriptor_id & IPR_DESCRIPTOR_MASK;
u8 type = cfg->type_status & IPR_PATH_CFG_TYPE_MASK;
u8 status = cfg->type_status & IPR_PATH_CFG_STATUS_MASK;
char buffer[IPR_MAX_RES_PATH_LENGTH];
if (type == IPR_PATH_CFG_NOT_EXIST || desc_id != IPR_DESCRIPTOR_SIS64)
return;
for (i = 0; i < ARRAY_SIZE(path_type_desc); i++) {
if (path_type_desc[i].type != type)
continue;
for (j = 0; j < ARRAY_SIZE(path_status_desc); j++) {
if (path_status_desc[j].status != status)
continue;
ipr_hcam_err(hostrcb, "%s %s: Resource Path=%s, Link rate=%s, WWN=%08X%08X\n",
path_status_desc[j].desc, path_type_desc[i].desc,
ipr_format_res_path(cfg->res_path, buffer,
sizeof(buffer)),
link_rate[cfg->link_rate & IPR_PHY_LINK_RATE_MASK],
be32_to_cpu(cfg->wwid[0]), be32_to_cpu(cfg->wwid[1]));
return;
}
}
ipr_hcam_err(hostrcb, "Path element=%02X: Resource Path=%s, Link rate=%s "
"WWN=%08X%08X\n", cfg->type_status,
ipr_format_res_path(cfg->res_path, buffer, sizeof(buffer)),
link_rate[cfg->link_rate & IPR_PHY_LINK_RATE_MASK],
be32_to_cpu(cfg->wwid[0]), be32_to_cpu(cfg->wwid[1]));
}
/**
* ipr_log_fabric_error - Log a fabric error.
* @ioa_cfg: ioa config struct
* @hostrcb: hostrcb struct
*
* Return value:
* none
**/
static void ipr_log_fabric_error(struct ipr_ioa_cfg *ioa_cfg,
struct ipr_hostrcb *hostrcb)
{
struct ipr_hostrcb_type_20_error *error;
struct ipr_hostrcb_fabric_desc *fabric;
struct ipr_hostrcb_config_element *cfg;
int i, add_len;
error = &hostrcb->hcam.u.error.u.type_20_error;
error->failure_reason[sizeof(error->failure_reason) - 1] = '\0';
ipr_hcam_err(hostrcb, "%s\n", error->failure_reason);
add_len = be32_to_cpu(hostrcb->hcam.length) -
(offsetof(struct ipr_hostrcb_error, u) +
offsetof(struct ipr_hostrcb_type_20_error, desc));
for (i = 0, fabric = error->desc; i < error->num_entries; i++) {
ipr_log_fabric_path(hostrcb, fabric);
for_each_fabric_cfg(fabric, cfg)
ipr_log_path_elem(hostrcb, cfg);
add_len -= be16_to_cpu(fabric->length);
fabric = (struct ipr_hostrcb_fabric_desc *)
((unsigned long)fabric + be16_to_cpu(fabric->length));
}
ipr_log_hex_data(ioa_cfg, (u32 *)fabric, add_len);
}
/**
* ipr_log_sis64_array_error - Log a sis64 array error.
* @ioa_cfg: ioa config struct
* @hostrcb: hostrcb struct
*
* Return value:
* none
**/
static void ipr_log_sis64_array_error(struct ipr_ioa_cfg *ioa_cfg,
struct ipr_hostrcb *hostrcb)
{
int i, num_entries;
struct ipr_hostrcb_type_24_error *error;
struct ipr_hostrcb64_array_data_entry *array_entry;
char buffer[IPR_MAX_RES_PATH_LENGTH];
const u8 zero_sn[IPR_SERIAL_NUM_LEN] = { [0 ... IPR_SERIAL_NUM_LEN-1] = '0' };
error = &hostrcb->hcam.u.error64.u.type_24_error;
ipr_err_separator;
ipr_err("RAID %s Array Configuration: %s\n",
error->protection_level,
ipr_format_res_path(error->last_res_path, buffer, sizeof(buffer)));
ipr_err_separator;
array_entry = error->array_member;
num_entries = min_t(u32, be32_to_cpu(error->num_entries),
sizeof(error->array_member));
for (i = 0; i < num_entries; i++, array_entry++) {
if (!memcmp(array_entry->vpd.vpd.sn, zero_sn, IPR_SERIAL_NUM_LEN))
continue;
if (error->exposed_mode_adn == i)
ipr_err("Exposed Array Member %d:\n", i);
else
ipr_err("Array Member %d:\n", i);
ipr_err("Array Member %d:\n", i);
ipr_log_ext_vpd(&array_entry->vpd);
ipr_err("Current Location: %s",
ipr_format_res_path(array_entry->res_path, buffer,
sizeof(buffer)));
ipr_err("Expected Location: %s",
ipr_format_res_path(array_entry->expected_res_path,
buffer, sizeof(buffer)));
ipr_err_separator;
}
}
/**
* ipr_log_sis64_fabric_error - Log a sis64 fabric error.
* @ioa_cfg: ioa config struct
* @hostrcb: hostrcb struct
*
* Return value:
* none
**/
static void ipr_log_sis64_fabric_error(struct ipr_ioa_cfg *ioa_cfg,
struct ipr_hostrcb *hostrcb)
{
struct ipr_hostrcb_type_30_error *error;
struct ipr_hostrcb64_fabric_desc *fabric;
struct ipr_hostrcb64_config_element *cfg;
int i, add_len;
error = &hostrcb->hcam.u.error64.u.type_30_error;
error->failure_reason[sizeof(error->failure_reason) - 1] = '\0';
ipr_hcam_err(hostrcb, "%s\n", error->failure_reason);
add_len = be32_to_cpu(hostrcb->hcam.length) -
(offsetof(struct ipr_hostrcb64_error, u) +
offsetof(struct ipr_hostrcb_type_30_error, desc));
for (i = 0, fabric = error->desc; i < error->num_entries; i++) {
ipr_log64_fabric_path(hostrcb, fabric);
for_each_fabric_cfg(fabric, cfg)
ipr_log64_path_elem(hostrcb, cfg);
add_len -= be16_to_cpu(fabric->length);
fabric = (struct ipr_hostrcb64_fabric_desc *)
((unsigned long)fabric + be16_to_cpu(fabric->length));
}
ipr_log_hex_data(ioa_cfg, (u32 *)fabric, add_len);
}
/**
* ipr_log_generic_error - Log an adapter error.
* @ioa_cfg: ioa config struct
* @hostrcb: hostrcb struct
*
* Return value:
* none
**/
static void ipr_log_generic_error(struct ipr_ioa_cfg *ioa_cfg,
struct ipr_hostrcb *hostrcb)
{
ipr_log_hex_data(ioa_cfg, hostrcb->hcam.u.raw.data,
be32_to_cpu(hostrcb->hcam.length));
}
/**
* ipr_get_error - Find the specfied IOASC in the ipr_error_table.
* @ioasc: IOASC
*
* This function will return the index of into the ipr_error_table
* for the specified IOASC. If the IOASC is not in the table,
* 0 will be returned, which points to the entry used for unknown errors.
*
* Return value:
* index into the ipr_error_table
**/
static u32 ipr_get_error(u32 ioasc)
{
int i;
for (i = 0; i < ARRAY_SIZE(ipr_error_table); i++)
if (ipr_error_table[i].ioasc == (ioasc & IPR_IOASC_IOASC_MASK))
return i;
return 0;
}
/**
* ipr_handle_log_data - Log an adapter error.
* @ioa_cfg: ioa config struct
* @hostrcb: hostrcb struct
*
* This function logs an adapter error to the system.
*
* Return value:
* none
**/
static void ipr_handle_log_data(struct ipr_ioa_cfg *ioa_cfg,
struct ipr_hostrcb *hostrcb)
{
u32 ioasc;
int error_index;
if (hostrcb->hcam.notify_type != IPR_HOST_RCB_NOTIF_TYPE_ERROR_LOG_ENTRY)
return;
if (hostrcb->hcam.notifications_lost == IPR_HOST_RCB_NOTIFICATIONS_LOST)
dev_err(&ioa_cfg->pdev->dev, "Error notifications lost\n");
if (ioa_cfg->sis64)
ioasc = be32_to_cpu(hostrcb->hcam.u.error64.fd_ioasc);
else
ioasc = be32_to_cpu(hostrcb->hcam.u.error.fd_ioasc);
if (!ioa_cfg->sis64 && (ioasc == IPR_IOASC_BUS_WAS_RESET ||
ioasc == IPR_IOASC_BUS_WAS_RESET_BY_OTHER)) {
/* Tell the midlayer we had a bus reset so it will handle the UA properly */
scsi_report_bus_reset(ioa_cfg->host,
hostrcb->hcam.u.error.fd_res_addr.bus);
}
error_index = ipr_get_error(ioasc);
if (!ipr_error_table[error_index].log_hcam)
return;
ipr_hcam_err(hostrcb, "%s\n", ipr_error_table[error_index].error);
/* Set indication we have logged an error */
ioa_cfg->errors_logged++;
if (ioa_cfg->log_level < ipr_error_table[error_index].log_hcam)
return;
if (be32_to_cpu(hostrcb->hcam.length) > sizeof(hostrcb->hcam.u.raw))
hostrcb->hcam.length = cpu_to_be32(sizeof(hostrcb->hcam.u.raw));
switch (hostrcb->hcam.overlay_id) {
case IPR_HOST_RCB_OVERLAY_ID_2:
ipr_log_cache_error(ioa_cfg, hostrcb);
break;
case IPR_HOST_RCB_OVERLAY_ID_3:
ipr_log_config_error(ioa_cfg, hostrcb);
break;
case IPR_HOST_RCB_OVERLAY_ID_4:
case IPR_HOST_RCB_OVERLAY_ID_6:
ipr_log_array_error(ioa_cfg, hostrcb);
break;
case IPR_HOST_RCB_OVERLAY_ID_7:
ipr_log_dual_ioa_error(ioa_cfg, hostrcb);
break;
case IPR_HOST_RCB_OVERLAY_ID_12:
ipr_log_enhanced_cache_error(ioa_cfg, hostrcb);
break;
case IPR_HOST_RCB_OVERLAY_ID_13:
ipr_log_enhanced_config_error(ioa_cfg, hostrcb);
break;
case IPR_HOST_RCB_OVERLAY_ID_14:
case IPR_HOST_RCB_OVERLAY_ID_16:
ipr_log_enhanced_array_error(ioa_cfg, hostrcb);
break;
case IPR_HOST_RCB_OVERLAY_ID_17:
ipr_log_enhanced_dual_ioa_error(ioa_cfg, hostrcb);
break;
case IPR_HOST_RCB_OVERLAY_ID_20:
ipr_log_fabric_error(ioa_cfg, hostrcb);
break;
case IPR_HOST_RCB_OVERLAY_ID_23:
ipr_log_sis64_config_error(ioa_cfg, hostrcb);
break;
case IPR_HOST_RCB_OVERLAY_ID_24:
case IPR_HOST_RCB_OVERLAY_ID_26:
ipr_log_sis64_array_error(ioa_cfg, hostrcb);
break;
case IPR_HOST_RCB_OVERLAY_ID_30:
ipr_log_sis64_fabric_error(ioa_cfg, hostrcb);
break;
case IPR_HOST_RCB_OVERLAY_ID_1:
case IPR_HOST_RCB_OVERLAY_ID_DEFAULT:
default:
ipr_log_generic_error(ioa_cfg, hostrcb);
break;
}
}
/**
* ipr_process_error - Op done function for an adapter error log.
* @ipr_cmd: ipr command struct
*
* This function is the op done function for an error log host
* controlled async from the adapter. It will log the error and
* send the HCAM back to the adapter.
*
* Return value:
* none
**/
static void ipr_process_error(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
struct ipr_hostrcb *hostrcb = ipr_cmd->u.hostrcb;
u32 ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc);
u32 fd_ioasc;
if (ioa_cfg->sis64)
fd_ioasc = be32_to_cpu(hostrcb->hcam.u.error64.fd_ioasc);
else
fd_ioasc = be32_to_cpu(hostrcb->hcam.u.error.fd_ioasc);
list_del(&hostrcb->queue);
list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
if (!ioasc) {
ipr_handle_log_data(ioa_cfg, hostrcb);
if (fd_ioasc == IPR_IOASC_NR_IOA_RESET_REQUIRED)
ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_ABBREV);
} else if (ioasc != IPR_IOASC_IOA_WAS_RESET) {
dev_err(&ioa_cfg->pdev->dev,
"Host RCB failed with IOASC: 0x%08X\n", ioasc);
}
ipr_send_hcam(ioa_cfg, IPR_HCAM_CDB_OP_CODE_LOG_DATA, hostrcb);
}
/**
* ipr_timeout - An internally generated op has timed out.
* @ipr_cmd: ipr command struct
*
* This function blocks host requests and initiates an
* adapter reset.
*
* Return value:
* none
**/
static void ipr_timeout(struct ipr_cmnd *ipr_cmd)
{
unsigned long lock_flags = 0;
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
ENTER;
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
ioa_cfg->errors_logged++;
dev_err(&ioa_cfg->pdev->dev,
"Adapter being reset due to command timeout.\n");
if (WAIT_FOR_DUMP == ioa_cfg->sdt_state)
ioa_cfg->sdt_state = GET_DUMP;
if (!ioa_cfg->in_reset_reload || ioa_cfg->reset_cmd == ipr_cmd)
ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
LEAVE;
}
/**
* ipr_oper_timeout - Adapter timed out transitioning to operational
* @ipr_cmd: ipr command struct
*
* This function blocks host requests and initiates an
* adapter reset.
*
* Return value:
* none
**/
static void ipr_oper_timeout(struct ipr_cmnd *ipr_cmd)
{
unsigned long lock_flags = 0;
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
ENTER;
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
ioa_cfg->errors_logged++;
dev_err(&ioa_cfg->pdev->dev,
"Adapter timed out transitioning to operational.\n");
if (WAIT_FOR_DUMP == ioa_cfg->sdt_state)
ioa_cfg->sdt_state = GET_DUMP;
if (!ioa_cfg->in_reset_reload || ioa_cfg->reset_cmd == ipr_cmd) {
if (ipr_fastfail)
ioa_cfg->reset_retries += IPR_NUM_RESET_RELOAD_RETRIES;
ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
}
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
LEAVE;
}
/**
* ipr_reset_reload - Reset/Reload the IOA
* @ioa_cfg: ioa config struct
* @shutdown_type: shutdown type
*
* This function resets the adapter and re-initializes it.
* This function assumes that all new host commands have been stopped.
* Return value:
* SUCCESS / FAILED
**/
static int ipr_reset_reload(struct ipr_ioa_cfg *ioa_cfg,
enum ipr_shutdown_type shutdown_type)
{
if (!ioa_cfg->in_reset_reload)
ipr_initiate_ioa_reset(ioa_cfg, shutdown_type);
spin_unlock_irq(ioa_cfg->host->host_lock);
wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
spin_lock_irq(ioa_cfg->host->host_lock);
/* If we got hit with a host reset while we were already resetting
the adapter for some reason, and the reset failed. */
if (ioa_cfg->ioa_is_dead) {
ipr_trace;
return FAILED;
}
return SUCCESS;
}
/**
* ipr_find_ses_entry - Find matching SES in SES table
* @res: resource entry struct of SES
*
* Return value:
* pointer to SES table entry / NULL on failure
**/
static const struct ipr_ses_table_entry *
ipr_find_ses_entry(struct ipr_resource_entry *res)
{
int i, j, matches;
struct ipr_std_inq_vpids *vpids;
const struct ipr_ses_table_entry *ste = ipr_ses_table;
for (i = 0; i < ARRAY_SIZE(ipr_ses_table); i++, ste++) {
for (j = 0, matches = 0; j < IPR_PROD_ID_LEN; j++) {
if (ste->compare_product_id_byte[j] == 'X') {
vpids = &res->std_inq_data.vpids;
if (vpids->product_id[j] == ste->product_id[j])
matches++;
else
break;
} else
matches++;
}
if (matches == IPR_PROD_ID_LEN)
return ste;
}
return NULL;
}
/**
* ipr_get_max_scsi_speed - Determine max SCSI speed for a given bus
* @ioa_cfg: ioa config struct
* @bus: SCSI bus
* @bus_width: bus width
*
* Return value:
* SCSI bus speed in units of 100KHz, 1600 is 160 MHz
* For a 2-byte wide SCSI bus, the maximum transfer speed is
* twice the maximum transfer rate (e.g. for a wide enabled bus,
* max 160MHz = max 320MB/sec).
**/
static u32 ipr_get_max_scsi_speed(struct ipr_ioa_cfg *ioa_cfg, u8 bus, u8 bus_width)
{
struct ipr_resource_entry *res;
const struct ipr_ses_table_entry *ste;
u32 max_xfer_rate = IPR_MAX_SCSI_RATE(bus_width);
/* Loop through each config table entry in the config table buffer */
list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
if (!(IPR_IS_SES_DEVICE(res->std_inq_data)))
continue;
if (bus != res->bus)
continue;
if (!(ste = ipr_find_ses_entry(res)))
continue;
max_xfer_rate = (ste->max_bus_speed_limit * 10) / (bus_width / 8);
}
return max_xfer_rate;
}
/**
* ipr_wait_iodbg_ack - Wait for an IODEBUG ACK from the IOA
* @ioa_cfg: ioa config struct
* @max_delay: max delay in micro-seconds to wait
*
* Waits for an IODEBUG ACK from the IOA, doing busy looping.
*
* Return value:
* 0 on success / other on failure
**/
static int ipr_wait_iodbg_ack(struct ipr_ioa_cfg *ioa_cfg, int max_delay)
{
volatile u32 pcii_reg;
int delay = 1;
/* Read interrupt reg until IOA signals IO Debug Acknowledge */
while (delay < max_delay) {
pcii_reg = readl(ioa_cfg->regs.sense_interrupt_reg);
if (pcii_reg & IPR_PCII_IO_DEBUG_ACKNOWLEDGE)
return 0;
/* udelay cannot be used if delay is more than a few milliseconds */
if ((delay / 1000) > MAX_UDELAY_MS)
mdelay(delay / 1000);
else
udelay(delay);
delay += delay;
}
return -EIO;
}
/**
* ipr_get_sis64_dump_data_section - Dump IOA memory
* @ioa_cfg: ioa config struct
* @start_addr: adapter address to dump
* @dest: destination kernel buffer
* @length_in_words: length to dump in 4 byte words
*
* Return value:
* 0 on success
**/
static int ipr_get_sis64_dump_data_section(struct ipr_ioa_cfg *ioa_cfg,
u32 start_addr,
__be32 *dest, u32 length_in_words)
{
int i;
for (i = 0; i < length_in_words; i++) {
writel(start_addr+(i*4), ioa_cfg->regs.dump_addr_reg);
*dest = cpu_to_be32(readl(ioa_cfg->regs.dump_data_reg));
dest++;
}
return 0;
}
/**
* ipr_get_ldump_data_section - Dump IOA memory
* @ioa_cfg: ioa config struct
* @start_addr: adapter address to dump
* @dest: destination kernel buffer
* @length_in_words: length to dump in 4 byte words
*
* Return value:
* 0 on success / -EIO on failure
**/
static int ipr_get_ldump_data_section(struct ipr_ioa_cfg *ioa_cfg,
u32 start_addr,
__be32 *dest, u32 length_in_words)
{
volatile u32 temp_pcii_reg;
int i, delay = 0;
if (ioa_cfg->sis64)
return ipr_get_sis64_dump_data_section(ioa_cfg, start_addr,
dest, length_in_words);
/* Write IOA interrupt reg starting LDUMP state */
writel((IPR_UPROCI_RESET_ALERT | IPR_UPROCI_IO_DEBUG_ALERT),
ioa_cfg->regs.set_uproc_interrupt_reg32);
/* Wait for IO debug acknowledge */
if (ipr_wait_iodbg_ack(ioa_cfg,
IPR_LDUMP_MAX_LONG_ACK_DELAY_IN_USEC)) {
dev_err(&ioa_cfg->pdev->dev,
"IOA dump long data transfer timeout\n");
return -EIO;
}
/* Signal LDUMP interlocked - clear IO debug ack */
writel(IPR_PCII_IO_DEBUG_ACKNOWLEDGE,
ioa_cfg->regs.clr_interrupt_reg);
/* Write Mailbox with starting address */
writel(start_addr, ioa_cfg->ioa_mailbox);
/* Signal address valid - clear IOA Reset alert */
writel(IPR_UPROCI_RESET_ALERT,
ioa_cfg->regs.clr_uproc_interrupt_reg32);
for (i = 0; i < length_in_words; i++) {
/* Wait for IO debug acknowledge */
if (ipr_wait_iodbg_ack(ioa_cfg,
IPR_LDUMP_MAX_SHORT_ACK_DELAY_IN_USEC)) {
dev_err(&ioa_cfg->pdev->dev,
"IOA dump short data transfer timeout\n");
return -EIO;
}
/* Read data from mailbox and increment destination pointer */
*dest = cpu_to_be32(readl(ioa_cfg->ioa_mailbox));
dest++;
/* For all but the last word of data, signal data received */
if (i < (length_in_words - 1)) {
/* Signal dump data received - Clear IO debug Ack */
writel(IPR_PCII_IO_DEBUG_ACKNOWLEDGE,
ioa_cfg->regs.clr_interrupt_reg);
}
}
/* Signal end of block transfer. Set reset alert then clear IO debug ack */
writel(IPR_UPROCI_RESET_ALERT,
ioa_cfg->regs.set_uproc_interrupt_reg32);
writel(IPR_UPROCI_IO_DEBUG_ALERT,
ioa_cfg->regs.clr_uproc_interrupt_reg32);
/* Signal dump data received - Clear IO debug Ack */
writel(IPR_PCII_IO_DEBUG_ACKNOWLEDGE,
ioa_cfg->regs.clr_interrupt_reg);
/* Wait for IOA to signal LDUMP exit - IOA reset alert will be cleared */
while (delay < IPR_LDUMP_MAX_SHORT_ACK_DELAY_IN_USEC) {
temp_pcii_reg =
readl(ioa_cfg->regs.sense_uproc_interrupt_reg32);
if (!(temp_pcii_reg & IPR_UPROCI_RESET_ALERT))
return 0;
udelay(10);
delay += 10;
}
return 0;
}
#ifdef CONFIG_SCSI_IPR_DUMP
/**
* ipr_sdt_copy - Copy Smart Dump Table to kernel buffer
* @ioa_cfg: ioa config struct
* @pci_address: adapter address
* @length: length of data to copy
*
* Copy data from PCI adapter to kernel buffer.
* Note: length MUST be a 4 byte multiple
* Return value:
* 0 on success / other on failure
**/
static int ipr_sdt_copy(struct ipr_ioa_cfg *ioa_cfg,
unsigned long pci_address, u32 length)
{
int bytes_copied = 0;
int cur_len, rc, rem_len, rem_page_len;
__be32 *page;
unsigned long lock_flags = 0;
struct ipr_ioa_dump *ioa_dump = &ioa_cfg->dump->ioa_dump;
while (bytes_copied < length &&
(ioa_dump->hdr.len + bytes_copied) < IPR_MAX_IOA_DUMP_SIZE) {
if (ioa_dump->page_offset >= PAGE_SIZE ||
ioa_dump->page_offset == 0) {
page = (__be32 *)__get_free_page(GFP_ATOMIC);
if (!page) {
ipr_trace;
return bytes_copied;
}
ioa_dump->page_offset = 0;
ioa_dump->ioa_data[ioa_dump->next_page_index] = page;
ioa_dump->next_page_index++;
} else
page = ioa_dump->ioa_data[ioa_dump->next_page_index - 1];
rem_len = length - bytes_copied;
rem_page_len = PAGE_SIZE - ioa_dump->page_offset;
cur_len = min(rem_len, rem_page_len);
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
if (ioa_cfg->sdt_state == ABORT_DUMP) {
rc = -EIO;
} else {
rc = ipr_get_ldump_data_section(ioa_cfg,
pci_address + bytes_copied,
&page[ioa_dump->page_offset / 4],
(cur_len / sizeof(u32)));
}
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
if (!rc) {
ioa_dump->page_offset += cur_len;
bytes_copied += cur_len;
} else {
ipr_trace;
break;
}
schedule();
}
return bytes_copied;
}
/**
* ipr_init_dump_entry_hdr - Initialize a dump entry header.
* @hdr: dump entry header struct
*
* Return value:
* nothing
**/
static void ipr_init_dump_entry_hdr(struct ipr_dump_entry_header *hdr)
{
hdr->eye_catcher = IPR_DUMP_EYE_CATCHER;
hdr->num_elems = 1;
hdr->offset = sizeof(*hdr);
hdr->status = IPR_DUMP_STATUS_SUCCESS;
}
/**
* ipr_dump_ioa_type_data - Fill in the adapter type in the dump.
* @ioa_cfg: ioa config struct
* @driver_dump: driver dump struct
*
* Return value:
* nothing
**/
static void ipr_dump_ioa_type_data(struct ipr_ioa_cfg *ioa_cfg,
struct ipr_driver_dump *driver_dump)
{
struct ipr_inquiry_page3 *ucode_vpd = &ioa_cfg->vpd_cbs->page3_data;
ipr_init_dump_entry_hdr(&driver_dump->ioa_type_entry.hdr);
driver_dump->ioa_type_entry.hdr.len =
sizeof(struct ipr_dump_ioa_type_entry) -
sizeof(struct ipr_dump_entry_header);
driver_dump->ioa_type_entry.hdr.data_type = IPR_DUMP_DATA_TYPE_BINARY;
driver_dump->ioa_type_entry.hdr.id = IPR_DUMP_DRIVER_TYPE_ID;
driver_dump->ioa_type_entry.type = ioa_cfg->type;
driver_dump->ioa_type_entry.fw_version = (ucode_vpd->major_release << 24) |
(ucode_vpd->card_type << 16) | (ucode_vpd->minor_release[0] << 8) |
ucode_vpd->minor_release[1];
driver_dump->hdr.num_entries++;
}
/**
* ipr_dump_version_data - Fill in the driver version in the dump.
* @ioa_cfg: ioa config struct
* @driver_dump: driver dump struct
*
* Return value:
* nothing
**/
static void ipr_dump_version_data(struct ipr_ioa_cfg *ioa_cfg,
struct ipr_driver_dump *driver_dump)
{
ipr_init_dump_entry_hdr(&driver_dump->version_entry.hdr);
driver_dump->version_entry.hdr.len =
sizeof(struct ipr_dump_version_entry) -
sizeof(struct ipr_dump_entry_header);
driver_dump->version_entry.hdr.data_type = IPR_DUMP_DATA_TYPE_ASCII;
driver_dump->version_entry.hdr.id = IPR_DUMP_DRIVER_VERSION_ID;
strcpy(driver_dump->version_entry.version, IPR_DRIVER_VERSION);
driver_dump->hdr.num_entries++;
}
/**
* ipr_dump_trace_data - Fill in the IOA trace in the dump.
* @ioa_cfg: ioa config struct
* @driver_dump: driver dump struct
*
* Return value:
* nothing
**/
static void ipr_dump_trace_data(struct ipr_ioa_cfg *ioa_cfg,
struct ipr_driver_dump *driver_dump)
{
ipr_init_dump_entry_hdr(&driver_dump->trace_entry.hdr);
driver_dump->trace_entry.hdr.len =
sizeof(struct ipr_dump_trace_entry) -
sizeof(struct ipr_dump_entry_header);
driver_dump->trace_entry.hdr.data_type = IPR_DUMP_DATA_TYPE_BINARY;
driver_dump->trace_entry.hdr.id = IPR_DUMP_TRACE_ID;
memcpy(driver_dump->trace_entry.trace, ioa_cfg->trace, IPR_TRACE_SIZE);
driver_dump->hdr.num_entries++;
}
/**
* ipr_dump_location_data - Fill in the IOA location in the dump.
* @ioa_cfg: ioa config struct
* @driver_dump: driver dump struct
*
* Return value:
* nothing
**/
static void ipr_dump_location_data(struct ipr_ioa_cfg *ioa_cfg,
struct ipr_driver_dump *driver_dump)
{
ipr_init_dump_entry_hdr(&driver_dump->location_entry.hdr);
driver_dump->location_entry.hdr.len =
sizeof(struct ipr_dump_location_entry) -
sizeof(struct ipr_dump_entry_header);
driver_dump->location_entry.hdr.data_type = IPR_DUMP_DATA_TYPE_ASCII;
driver_dump->location_entry.hdr.id = IPR_DUMP_LOCATION_ID;
strcpy(driver_dump->location_entry.location, dev_name(&ioa_cfg->pdev->dev));
driver_dump->hdr.num_entries++;
}
/**
* ipr_get_ioa_dump - Perform a dump of the driver and adapter.
* @ioa_cfg: ioa config struct
* @dump: dump struct
*
* Return value:
* nothing
**/
static void ipr_get_ioa_dump(struct ipr_ioa_cfg *ioa_cfg, struct ipr_dump *dump)
{
unsigned long start_addr, sdt_word;
unsigned long lock_flags = 0;
struct ipr_driver_dump *driver_dump = &dump->driver_dump;
struct ipr_ioa_dump *ioa_dump = &dump->ioa_dump;
u32 num_entries, start_off, end_off;
u32 bytes_to_copy, bytes_copied, rc;
struct ipr_sdt *sdt;
int valid = 1;
int i;
ENTER;
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
if (ioa_cfg->sdt_state != GET_DUMP) {
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return;
}
start_addr = readl(ioa_cfg->ioa_mailbox);
if (!ioa_cfg->sis64 && !ipr_sdt_is_fmt2(start_addr)) {
dev_err(&ioa_cfg->pdev->dev,
"Invalid dump table format: %lx\n", start_addr);
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return;
}
dev_err(&ioa_cfg->pdev->dev, "Dump of IOA initiated\n");
driver_dump->hdr.eye_catcher = IPR_DUMP_EYE_CATCHER;
/* Initialize the overall dump header */
driver_dump->hdr.len = sizeof(struct ipr_driver_dump);
driver_dump->hdr.num_entries = 1;
driver_dump->hdr.first_entry_offset = sizeof(struct ipr_dump_header);
driver_dump->hdr.status = IPR_DUMP_STATUS_SUCCESS;
driver_dump->hdr.os = IPR_DUMP_OS_LINUX;
driver_dump->hdr.driver_name = IPR_DUMP_DRIVER_NAME;
ipr_dump_version_data(ioa_cfg, driver_dump);
ipr_dump_location_data(ioa_cfg, driver_dump);
ipr_dump_ioa_type_data(ioa_cfg, driver_dump);
ipr_dump_trace_data(ioa_cfg, driver_dump);
/* Update dump_header */
driver_dump->hdr.len += sizeof(struct ipr_dump_entry_header);
/* IOA Dump entry */
ipr_init_dump_entry_hdr(&ioa_dump->hdr);
ioa_dump->hdr.len = 0;
ioa_dump->hdr.data_type = IPR_DUMP_DATA_TYPE_BINARY;
ioa_dump->hdr.id = IPR_DUMP_IOA_DUMP_ID;
/* First entries in sdt are actually a list of dump addresses and
lengths to gather the real dump data. sdt represents the pointer
to the ioa generated dump table. Dump data will be extracted based
on entries in this table */
sdt = &ioa_dump->sdt;
rc = ipr_get_ldump_data_section(ioa_cfg, start_addr, (__be32 *)sdt,
sizeof(struct ipr_sdt) / sizeof(__be32));
/* Smart Dump table is ready to use and the first entry is valid */
if (rc || ((be32_to_cpu(sdt->hdr.state) != IPR_FMT3_SDT_READY_TO_USE) &&
(be32_to_cpu(sdt->hdr.state) != IPR_FMT2_SDT_READY_TO_USE))) {
dev_err(&ioa_cfg->pdev->dev,
"Dump of IOA failed. Dump table not valid: %d, %X.\n",
rc, be32_to_cpu(sdt->hdr.state));
driver_dump->hdr.status = IPR_DUMP_STATUS_FAILED;
ioa_cfg->sdt_state = DUMP_OBTAINED;
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return;
}
num_entries = be32_to_cpu(sdt->hdr.num_entries_used);
if (num_entries > IPR_NUM_SDT_ENTRIES)
num_entries = IPR_NUM_SDT_ENTRIES;
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
for (i = 0; i < num_entries; i++) {
if (ioa_dump->hdr.len > IPR_MAX_IOA_DUMP_SIZE) {
driver_dump->hdr.status = IPR_DUMP_STATUS_QUAL_SUCCESS;
break;
}
if (sdt->entry[i].flags & IPR_SDT_VALID_ENTRY) {
sdt_word = be32_to_cpu(sdt->entry[i].start_token);
if (ioa_cfg->sis64)
bytes_to_copy = be32_to_cpu(sdt->entry[i].end_token);
else {
start_off = sdt_word & IPR_FMT2_MBX_ADDR_MASK;
end_off = be32_to_cpu(sdt->entry[i].end_token);
if (ipr_sdt_is_fmt2(sdt_word) && sdt_word)
bytes_to_copy = end_off - start_off;
else
valid = 0;
}
if (valid) {
if (bytes_to_copy > IPR_MAX_IOA_DUMP_SIZE) {
sdt->entry[i].flags &= ~IPR_SDT_VALID_ENTRY;
continue;
}
/* Copy data from adapter to driver buffers */
bytes_copied = ipr_sdt_copy(ioa_cfg, sdt_word,
bytes_to_copy);
ioa_dump->hdr.len += bytes_copied;
if (bytes_copied != bytes_to_copy) {
driver_dump->hdr.status = IPR_DUMP_STATUS_QUAL_SUCCESS;
break;
}
}
}
}
dev_err(&ioa_cfg->pdev->dev, "Dump of IOA completed.\n");
/* Update dump_header */
driver_dump->hdr.len += ioa_dump->hdr.len;
wmb();
ioa_cfg->sdt_state = DUMP_OBTAINED;
LEAVE;
}
#else
#define ipr_get_ioa_dump(ioa_cfg, dump) do { } while(0)
#endif
/**
* ipr_release_dump - Free adapter dump memory
* @kref: kref struct
*
* Return value:
* nothing
**/
static void ipr_release_dump(struct kref *kref)
{
struct ipr_dump *dump = container_of(kref,struct ipr_dump,kref);
struct ipr_ioa_cfg *ioa_cfg = dump->ioa_cfg;
unsigned long lock_flags = 0;
int i;
ENTER;
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
ioa_cfg->dump = NULL;
ioa_cfg->sdt_state = INACTIVE;
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
for (i = 0; i < dump->ioa_dump.next_page_index; i++)
free_page((unsigned long) dump->ioa_dump.ioa_data[i]);
kfree(dump);
LEAVE;
}
/**
* ipr_worker_thread - Worker thread
* @work: ioa config struct
*
* Called at task level from a work thread. This function takes care
* of adding and removing device from the mid-layer as configuration
* changes are detected by the adapter.
*
* Return value:
* nothing
**/
static void ipr_worker_thread(struct work_struct *work)
{
unsigned long lock_flags;
struct ipr_resource_entry *res;
struct scsi_device *sdev;
struct ipr_dump *dump;
struct ipr_ioa_cfg *ioa_cfg =
container_of(work, struct ipr_ioa_cfg, work_q);
u8 bus, target, lun;
int did_work;
ENTER;
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
if (ioa_cfg->sdt_state == GET_DUMP) {
dump = ioa_cfg->dump;
if (!dump) {
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return;
}
kref_get(&dump->kref);
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
ipr_get_ioa_dump(ioa_cfg, dump);
kref_put(&dump->kref, ipr_release_dump);
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
if (ioa_cfg->sdt_state == DUMP_OBTAINED)
ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return;
}
restart:
do {
did_work = 0;
if (!ioa_cfg->allow_cmds || !ioa_cfg->allow_ml_add_del) {
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return;
}
list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
if (res->del_from_ml && res->sdev) {
did_work = 1;
sdev = res->sdev;
if (!scsi_device_get(sdev)) {
list_move_tail(&res->queue, &ioa_cfg->free_res_q);
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
scsi_remove_device(sdev);
scsi_device_put(sdev);
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
}
break;
}
}
} while(did_work);
list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
if (res->add_to_ml) {
bus = res->bus;
target = res->target;
lun = res->lun;
res->add_to_ml = 0;
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
scsi_add_device(ioa_cfg->host, bus, target, lun);
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
goto restart;
}
}
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
kobject_uevent(&ioa_cfg->host->shost_dev.kobj, KOBJ_CHANGE);
LEAVE;
}
#ifdef CONFIG_SCSI_IPR_TRACE
/**
* ipr_read_trace - Dump the adapter trace
* @filp: open sysfs file
* @kobj: kobject struct
sysfs: add parameter "struct bin_attribute *" in .read/.write methods for sysfs binary attributes Well, first of all, I don't want to change so many files either. What I do: Adding a new parameter "struct bin_attribute *" in the .read/.write methods for the sysfs binary attributes. In fact, only the four lines change in fs/sysfs/bin.c and include/linux/sysfs.h do the real work. But I have to update all the files that use binary attributes to make them compatible with the new .read and .write methods. I'm not sure if I missed any. :( Why I do this: For a sysfs attribute, we can get a pointer pointing to the struct attribute in the .show/.store method, while we can't do this for the binary attributes. I don't know why this is different, but this does make it not so handy to use the binary attributes as the regular ones. So I think this patch is reasonable. :) Who benefits from it: The patch that exposes ACPI tables in sysfs requires such an improvement. All the table binary attributes share the same .read method. Parameter "struct bin_attribute *" is used to get the table signature and instance number which are used to distinguish different ACPI table binary attributes. Without this parameter, we need to offer different .read methods for different ACPI table binary attributes. This is impossible as there are various ACPI tables on different platforms, and we don't know what they are until they are loaded. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-09 07:57:22 +02:00
* @bin_attr: bin_attribute struct
* @buf: buffer
* @off: offset
* @count: buffer size
*
* Return value:
* number of bytes printed to buffer
**/
static ssize_t ipr_read_trace(struct file *filp, struct kobject *kobj,
sysfs: add parameter "struct bin_attribute *" in .read/.write methods for sysfs binary attributes Well, first of all, I don't want to change so many files either. What I do: Adding a new parameter "struct bin_attribute *" in the .read/.write methods for the sysfs binary attributes. In fact, only the four lines change in fs/sysfs/bin.c and include/linux/sysfs.h do the real work. But I have to update all the files that use binary attributes to make them compatible with the new .read and .write methods. I'm not sure if I missed any. :( Why I do this: For a sysfs attribute, we can get a pointer pointing to the struct attribute in the .show/.store method, while we can't do this for the binary attributes. I don't know why this is different, but this does make it not so handy to use the binary attributes as the regular ones. So I think this patch is reasonable. :) Who benefits from it: The patch that exposes ACPI tables in sysfs requires such an improvement. All the table binary attributes share the same .read method. Parameter "struct bin_attribute *" is used to get the table signature and instance number which are used to distinguish different ACPI table binary attributes. Without this parameter, we need to offer different .read methods for different ACPI table binary attributes. This is impossible as there are various ACPI tables on different platforms, and we don't know what they are until they are loaded. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-09 07:57:22 +02:00
struct bin_attribute *bin_attr,
char *buf, loff_t off, size_t count)
{
struct device *dev = container_of(kobj, struct device, kobj);
struct Scsi_Host *shost = class_to_shost(dev);
struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
unsigned long lock_flags = 0;
ssize_t ret;
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
ret = memory_read_from_buffer(buf, count, &off, ioa_cfg->trace,
IPR_TRACE_SIZE);
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return ret;
}
static struct bin_attribute ipr_trace_attr = {
.attr = {
.name = "trace",
.mode = S_IRUGO,
},
.size = 0,
.read = ipr_read_trace,
};
#endif
/**
* ipr_show_fw_version - Show the firmware version
* @dev: class device struct
* @buf: buffer
*
* Return value:
* number of bytes printed to buffer
**/
static ssize_t ipr_show_fw_version(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
struct ipr_inquiry_page3 *ucode_vpd = &ioa_cfg->vpd_cbs->page3_data;
unsigned long lock_flags = 0;
int len;
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
len = snprintf(buf, PAGE_SIZE, "%02X%02X%02X%02X\n",
ucode_vpd->major_release, ucode_vpd->card_type,
ucode_vpd->minor_release[0],
ucode_vpd->minor_release[1]);
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return len;
}
static struct device_attribute ipr_fw_version_attr = {
.attr = {
.name = "fw_version",
.mode = S_IRUGO,
},
.show = ipr_show_fw_version,
};
/**
* ipr_show_log_level - Show the adapter's error logging level
* @dev: class device struct
* @buf: buffer
*
* Return value:
* number of bytes printed to buffer
**/
static ssize_t ipr_show_log_level(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
unsigned long lock_flags = 0;
int len;
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
len = snprintf(buf, PAGE_SIZE, "%d\n", ioa_cfg->log_level);
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return len;
}
/**
* ipr_store_log_level - Change the adapter's error logging level
* @dev: class device struct
* @buf: buffer
*
* Return value:
* number of bytes printed to buffer
**/
static ssize_t ipr_store_log_level(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
unsigned long lock_flags = 0;
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
ioa_cfg->log_level = simple_strtoul(buf, NULL, 10);
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return strlen(buf);
}
static struct device_attribute ipr_log_level_attr = {
.attr = {
.name = "log_level",
.mode = S_IRUGO | S_IWUSR,
},
.show = ipr_show_log_level,
.store = ipr_store_log_level
};
/**
* ipr_store_diagnostics - IOA Diagnostics interface
* @dev: device struct
* @buf: buffer
* @count: buffer size
*
* This function will reset the adapter and wait a reasonable
* amount of time for any errors that the adapter might log.
*
* Return value:
* count on success / other on failure
**/
static ssize_t ipr_store_diagnostics(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
unsigned long lock_flags = 0;
int rc = count;
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
while(ioa_cfg->in_reset_reload) {
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
}
ioa_cfg->errors_logged = 0;
ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NORMAL);
if (ioa_cfg->in_reset_reload) {
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
/* Wait for a second for any errors to be logged */
msleep(1000);
} else {
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return -EIO;
}
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
if (ioa_cfg->in_reset_reload || ioa_cfg->errors_logged)
rc = -EIO;
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return rc;
}
static struct device_attribute ipr_diagnostics_attr = {
.attr = {
.name = "run_diagnostics",
.mode = S_IWUSR,
},
.store = ipr_store_diagnostics
};
/**
* ipr_show_adapter_state - Show the adapter's state
* @class_dev: device struct
* @buf: buffer
*
* Return value:
* number of bytes printed to buffer
**/
static ssize_t ipr_show_adapter_state(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
unsigned long lock_flags = 0;
int len;
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
if (ioa_cfg->ioa_is_dead)
len = snprintf(buf, PAGE_SIZE, "offline\n");
else
len = snprintf(buf, PAGE_SIZE, "online\n");
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return len;
}
/**
* ipr_store_adapter_state - Change adapter state
* @dev: device struct
* @buf: buffer
* @count: buffer size
*
* This function will change the adapter's state.
*
* Return value:
* count on success / other on failure
**/
static ssize_t ipr_store_adapter_state(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
unsigned long lock_flags;
int result = count;
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
if (ioa_cfg->ioa_is_dead && !strncmp(buf, "online", 6)) {
ioa_cfg->ioa_is_dead = 0;
ioa_cfg->reset_retries = 0;
ioa_cfg->in_ioa_bringdown = 0;
ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
}
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
return result;
}
static struct device_attribute ipr_ioa_state_attr = {
.attr = {
.name = "online_state",
.mode = S_IRUGO | S_IWUSR,
},
.show = ipr_show_adapter_state,
.store = ipr_store_adapter_state
};
/**
* ipr_store_reset_adapter - Reset the adapter
* @dev: device struct
* @buf: buffer
* @count: buffer size
*
* This function will reset the adapter.
*
* Return value:
* count on success / other on failure
**/
static ssize_t ipr_store_reset_adapter(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
unsigned long lock_flags;
int result = count;
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
if (!ioa_cfg->in_reset_reload)
ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NORMAL);
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
return result;
}
static struct device_attribute ipr_ioa_reset_attr = {
.attr = {
.name = "reset_host",
.mode = S_IWUSR,
},
.store = ipr_store_reset_adapter
};
/**
* ipr_alloc_ucode_buffer - Allocates a microcode download buffer
* @buf_len: buffer length
*
* Allocates a DMA'able buffer in chunks and assembles a scatter/gather
* list to use for microcode download
*
* Return value:
* pointer to sglist / NULL on failure
**/
static struct ipr_sglist *ipr_alloc_ucode_buffer(int buf_len)
{
int sg_size, order, bsize_elem, num_elem, i, j;
struct ipr_sglist *sglist;
struct scatterlist *scatterlist;
struct page *page;
/* Get the minimum size per scatter/gather element */
sg_size = buf_len / (IPR_MAX_SGLIST - 1);
/* Get the actual size per element */
order = get_order(sg_size);
/* Determine the actual number of bytes per element */
bsize_elem = PAGE_SIZE * (1 << order);
/* Determine the actual number of sg entries needed */
if (buf_len % bsize_elem)
num_elem = (buf_len / bsize_elem) + 1;
else
num_elem = buf_len / bsize_elem;
/* Allocate a scatter/gather list for the DMA */
sglist = kzalloc(sizeof(struct ipr_sglist) +
(sizeof(struct scatterlist) * (num_elem - 1)),
GFP_KERNEL);
if (sglist == NULL) {
ipr_trace;
return NULL;
}
scatterlist = sglist->scatterlist;
sg_init_table(scatterlist, num_elem);
sglist->order = order;
sglist->num_sg = num_elem;
/* Allocate a bunch of sg elements */
for (i = 0; i < num_elem; i++) {
page = alloc_pages(GFP_KERNEL, order);
if (!page) {
ipr_trace;
/* Free up what we already allocated */
for (j = i - 1; j >= 0; j--)
__free_pages(sg_page(&scatterlist[j]), order);
kfree(sglist);
return NULL;
}
sg_set_page(&scatterlist[i], page, 0, 0);
}
return sglist;
}
/**
* ipr_free_ucode_buffer - Frees a microcode download buffer
* @p_dnld: scatter/gather list pointer
*
* Free a DMA'able ucode download buffer previously allocated with
* ipr_alloc_ucode_buffer
*
* Return value:
* nothing
**/
static void ipr_free_ucode_buffer(struct ipr_sglist *sglist)
{
int i;
for (i = 0; i < sglist->num_sg; i++)
__free_pages(sg_page(&sglist->scatterlist[i]), sglist->order);
kfree(sglist);
}
/**
* ipr_copy_ucode_buffer - Copy user buffer to kernel buffer
* @sglist: scatter/gather list pointer
* @buffer: buffer pointer
* @len: buffer length
*
* Copy a microcode image from a user buffer into a buffer allocated by
* ipr_alloc_ucode_buffer
*
* Return value:
* 0 on success / other on failure
**/
static int ipr_copy_ucode_buffer(struct ipr_sglist *sglist,
u8 *buffer, u32 len)
{
int bsize_elem, i, result = 0;
struct scatterlist *scatterlist;
void *kaddr;
/* Determine the actual number of bytes per element */
bsize_elem = PAGE_SIZE * (1 << sglist->order);
scatterlist = sglist->scatterlist;
for (i = 0; i < (len / bsize_elem); i++, buffer += bsize_elem) {
struct page *page = sg_page(&scatterlist[i]);
kaddr = kmap(page);
memcpy(kaddr, buffer, bsize_elem);
kunmap(page);
scatterlist[i].length = bsize_elem;
if (result != 0) {
ipr_trace;
return result;
}
}
if (len % bsize_elem) {
struct page *page = sg_page(&scatterlist[i]);
kaddr = kmap(page);
memcpy(kaddr, buffer, len % bsize_elem);
kunmap(page);
scatterlist[i].length = len % bsize_elem;
}
sglist->buffer_len = len;
return result;
}
/**
* ipr_build_ucode_ioadl64 - Build a microcode download IOADL
* @ipr_cmd: ipr command struct
* @sglist: scatter/gather list
*
* Builds a microcode download IOA data list (IOADL).
*
**/
static void ipr_build_ucode_ioadl64(struct ipr_cmnd *ipr_cmd,
struct ipr_sglist *sglist)
{
struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
struct ipr_ioadl64_desc *ioadl64 = ipr_cmd->i.ioadl64;
struct scatterlist *scatterlist = sglist->scatterlist;
int i;
ipr_cmd->dma_use_sg = sglist->num_dma_sg;
ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ;
ioarcb->data_transfer_length = cpu_to_be32(sglist->buffer_len);
ioarcb->ioadl_len =
cpu_to_be32(sizeof(struct ipr_ioadl64_desc) * ipr_cmd->dma_use_sg);
for (i = 0; i < ipr_cmd->dma_use_sg; i++) {
ioadl64[i].flags = cpu_to_be32(IPR_IOADL_FLAGS_WRITE);
ioadl64[i].data_len = cpu_to_be32(sg_dma_len(&scatterlist[i]));
ioadl64[i].address = cpu_to_be64(sg_dma_address(&scatterlist[i]));
}
ioadl64[i-1].flags |= cpu_to_be32(IPR_IOADL_FLAGS_LAST);
}
/**
* ipr_build_ucode_ioadl - Build a microcode download IOADL
* @ipr_cmd: ipr command struct
* @sglist: scatter/gather list
*
* Builds a microcode download IOA data list (IOADL).
*
**/
static void ipr_build_ucode_ioadl(struct ipr_cmnd *ipr_cmd,
struct ipr_sglist *sglist)
{
struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
struct ipr_ioadl_desc *ioadl = ipr_cmd->i.ioadl;
struct scatterlist *scatterlist = sglist->scatterlist;
int i;
ipr_cmd->dma_use_sg = sglist->num_dma_sg;
ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ;
ioarcb->data_transfer_length = cpu_to_be32(sglist->buffer_len);
ioarcb->ioadl_len =
cpu_to_be32(sizeof(struct ipr_ioadl_desc) * ipr_cmd->dma_use_sg);
for (i = 0; i < ipr_cmd->dma_use_sg; i++) {
ioadl[i].flags_and_data_len =
cpu_to_be32(IPR_IOADL_FLAGS_WRITE | sg_dma_len(&scatterlist[i]));
ioadl[i].address =
cpu_to_be32(sg_dma_address(&scatterlist[i]));
}
ioadl[i-1].flags_and_data_len |=
cpu_to_be32(IPR_IOADL_FLAGS_LAST);
}
/**
* ipr_update_ioa_ucode - Update IOA's microcode
* @ioa_cfg: ioa config struct
* @sglist: scatter/gather list
*
* Initiate an adapter reset to update the IOA's microcode
*
* Return value:
* 0 on success / -EIO on failure
**/
static int ipr_update_ioa_ucode(struct ipr_ioa_cfg *ioa_cfg,
struct ipr_sglist *sglist)
{
unsigned long lock_flags;
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
while(ioa_cfg->in_reset_reload) {
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
}
if (ioa_cfg->ucode_sglist) {
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
dev_err(&ioa_cfg->pdev->dev,
"Microcode download already in progress\n");
return -EIO;
}
sglist->num_dma_sg = pci_map_sg(ioa_cfg->pdev, sglist->scatterlist,
sglist->num_sg, DMA_TO_DEVICE);
if (!sglist->num_dma_sg) {
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
dev_err(&ioa_cfg->pdev->dev,
"Failed to map microcode download buffer!\n");
return -EIO;
}
ioa_cfg->ucode_sglist = sglist;
ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NORMAL);
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
ioa_cfg->ucode_sglist = NULL;
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return 0;
}
/**
* ipr_store_update_fw - Update the firmware on the adapter
* @class_dev: device struct
* @buf: buffer
* @count: buffer size
*
* This function will update the firmware on the adapter.
*
* Return value:
* count on success / other on failure
**/
static ssize_t ipr_store_update_fw(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
struct ipr_ucode_image_header *image_hdr;
const struct firmware *fw_entry;
struct ipr_sglist *sglist;
char fname[100];
char *src;
int len, result, dnld_size;
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
len = snprintf(fname, 99, "%s", buf);
fname[len-1] = '\0';
if(request_firmware(&fw_entry, fname, &ioa_cfg->pdev->dev)) {
dev_err(&ioa_cfg->pdev->dev, "Firmware file %s not found\n", fname);
return -EIO;
}
image_hdr = (struct ipr_ucode_image_header *)fw_entry->data;
if (be32_to_cpu(image_hdr->header_length) > fw_entry->size ||
(ioa_cfg->vpd_cbs->page3_data.card_type &&
ioa_cfg->vpd_cbs->page3_data.card_type != image_hdr->card_type)) {
dev_err(&ioa_cfg->pdev->dev, "Invalid microcode buffer\n");
release_firmware(fw_entry);
return -EINVAL;
}
src = (u8 *)image_hdr + be32_to_cpu(image_hdr->header_length);
dnld_size = fw_entry->size - be32_to_cpu(image_hdr->header_length);
sglist = ipr_alloc_ucode_buffer(dnld_size);
if (!sglist) {
dev_err(&ioa_cfg->pdev->dev, "Microcode buffer allocation failed\n");
release_firmware(fw_entry);
return -ENOMEM;
}
result = ipr_copy_ucode_buffer(sglist, src, dnld_size);
if (result) {
dev_err(&ioa_cfg->pdev->dev,
"Microcode buffer copy to DMA buffer failed\n");
goto out;
}
result = ipr_update_ioa_ucode(ioa_cfg, sglist);
if (!result)
result = count;
out:
ipr_free_ucode_buffer(sglist);
release_firmware(fw_entry);
return result;
}
static struct device_attribute ipr_update_fw_attr = {
.attr = {
.name = "update_fw",
.mode = S_IWUSR,
},
.store = ipr_store_update_fw
};
/**
* ipr_show_fw_type - Show the adapter's firmware type.
* @dev: class device struct
* @buf: buffer
*
* Return value:
* number of bytes printed to buffer
**/
static ssize_t ipr_show_fw_type(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
unsigned long lock_flags = 0;
int len;
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
len = snprintf(buf, PAGE_SIZE, "%d\n", ioa_cfg->sis64);
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return len;
}
static struct device_attribute ipr_ioa_fw_type_attr = {
.attr = {
.name = "fw_type",
.mode = S_IRUGO,
},
.show = ipr_show_fw_type
};
static struct device_attribute *ipr_ioa_attrs[] = {
&ipr_fw_version_attr,
&ipr_log_level_attr,
&ipr_diagnostics_attr,
&ipr_ioa_state_attr,
&ipr_ioa_reset_attr,
&ipr_update_fw_attr,
&ipr_ioa_fw_type_attr,
NULL,
};
#ifdef CONFIG_SCSI_IPR_DUMP
/**
* ipr_read_dump - Dump the adapter
* @filp: open sysfs file
* @kobj: kobject struct
sysfs: add parameter "struct bin_attribute *" in .read/.write methods for sysfs binary attributes Well, first of all, I don't want to change so many files either. What I do: Adding a new parameter "struct bin_attribute *" in the .read/.write methods for the sysfs binary attributes. In fact, only the four lines change in fs/sysfs/bin.c and include/linux/sysfs.h do the real work. But I have to update all the files that use binary attributes to make them compatible with the new .read and .write methods. I'm not sure if I missed any. :( Why I do this: For a sysfs attribute, we can get a pointer pointing to the struct attribute in the .show/.store method, while we can't do this for the binary attributes. I don't know why this is different, but this does make it not so handy to use the binary attributes as the regular ones. So I think this patch is reasonable. :) Who benefits from it: The patch that exposes ACPI tables in sysfs requires such an improvement. All the table binary attributes share the same .read method. Parameter "struct bin_attribute *" is used to get the table signature and instance number which are used to distinguish different ACPI table binary attributes. Without this parameter, we need to offer different .read methods for different ACPI table binary attributes. This is impossible as there are various ACPI tables on different platforms, and we don't know what they are until they are loaded. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-09 07:57:22 +02:00
* @bin_attr: bin_attribute struct
* @buf: buffer
* @off: offset
* @count: buffer size
*
* Return value:
* number of bytes printed to buffer
**/
static ssize_t ipr_read_dump(struct file *filp, struct kobject *kobj,
sysfs: add parameter "struct bin_attribute *" in .read/.write methods for sysfs binary attributes Well, first of all, I don't want to change so many files either. What I do: Adding a new parameter "struct bin_attribute *" in the .read/.write methods for the sysfs binary attributes. In fact, only the four lines change in fs/sysfs/bin.c and include/linux/sysfs.h do the real work. But I have to update all the files that use binary attributes to make them compatible with the new .read and .write methods. I'm not sure if I missed any. :( Why I do this: For a sysfs attribute, we can get a pointer pointing to the struct attribute in the .show/.store method, while we can't do this for the binary attributes. I don't know why this is different, but this does make it not so handy to use the binary attributes as the regular ones. So I think this patch is reasonable. :) Who benefits from it: The patch that exposes ACPI tables in sysfs requires such an improvement. All the table binary attributes share the same .read method. Parameter "struct bin_attribute *" is used to get the table signature and instance number which are used to distinguish different ACPI table binary attributes. Without this parameter, we need to offer different .read methods for different ACPI table binary attributes. This is impossible as there are various ACPI tables on different platforms, and we don't know what they are until they are loaded. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-09 07:57:22 +02:00
struct bin_attribute *bin_attr,
char *buf, loff_t off, size_t count)
{
struct device *cdev = container_of(kobj, struct device, kobj);
struct Scsi_Host *shost = class_to_shost(cdev);
struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
struct ipr_dump *dump;
unsigned long lock_flags = 0;
char *src;
int len;
size_t rc = count;
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
dump = ioa_cfg->dump;
if (ioa_cfg->sdt_state != DUMP_OBTAINED || !dump) {
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return 0;
}
kref_get(&dump->kref);
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
if (off > dump->driver_dump.hdr.len) {
kref_put(&dump->kref, ipr_release_dump);
return 0;
}
if (off + count > dump->driver_dump.hdr.len) {
count = dump->driver_dump.hdr.len - off;
rc = count;
}
if (count && off < sizeof(dump->driver_dump)) {
if (off + count > sizeof(dump->driver_dump))
len = sizeof(dump->driver_dump) - off;
else
len = count;
src = (u8 *)&dump->driver_dump + off;
memcpy(buf, src, len);
buf += len;
off += len;
count -= len;
}
off -= sizeof(dump->driver_dump);
if (count && off < offsetof(struct ipr_ioa_dump, ioa_data)) {
if (off + count > offsetof(struct ipr_ioa_dump, ioa_data))
len = offsetof(struct ipr_ioa_dump, ioa_data) - off;
else
len = count;
src = (u8 *)&dump->ioa_dump + off;
memcpy(buf, src, len);
buf += len;
off += len;
count -= len;
}
off -= offsetof(struct ipr_ioa_dump, ioa_data);
while (count) {
if ((off & PAGE_MASK) != ((off + count) & PAGE_MASK))
len = PAGE_ALIGN(off) - off;
else
len = count;
src = (u8 *)dump->ioa_dump.ioa_data[(off & PAGE_MASK) >> PAGE_SHIFT];
src += off & ~PAGE_MASK;
memcpy(buf, src, len);
buf += len;
off += len;
count -= len;
}
kref_put(&dump->kref, ipr_release_dump);
return rc;
}
/**
* ipr_alloc_dump - Prepare for adapter dump
* @ioa_cfg: ioa config struct
*
* Return value:
* 0 on success / other on failure
**/
static int ipr_alloc_dump(struct ipr_ioa_cfg *ioa_cfg)
{
struct ipr_dump *dump;
unsigned long lock_flags = 0;
dump = kzalloc(sizeof(struct ipr_dump), GFP_KERNEL);
if (!dump) {
ipr_err("Dump memory allocation failed\n");
return -ENOMEM;
}
kref_init(&dump->kref);
dump->ioa_cfg = ioa_cfg;
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
if (INACTIVE != ioa_cfg->sdt_state) {
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
kfree(dump);
return 0;
}
ioa_cfg->dump = dump;
ioa_cfg->sdt_state = WAIT_FOR_DUMP;
if (ioa_cfg->ioa_is_dead && !ioa_cfg->dump_taken) {
ioa_cfg->dump_taken = 1;
schedule_work(&ioa_cfg->work_q);
}
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return 0;
}
/**
* ipr_free_dump - Free adapter dump memory
* @ioa_cfg: ioa config struct
*
* Return value:
* 0 on success / other on failure
**/
static int ipr_free_dump(struct ipr_ioa_cfg *ioa_cfg)
{
struct ipr_dump *dump;
unsigned long lock_flags = 0;
ENTER;
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
dump = ioa_cfg->dump;
if (!dump) {
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return 0;
}
ioa_cfg->dump = NULL;
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
kref_put(&dump->kref, ipr_release_dump);
LEAVE;
return 0;
}
/**
* ipr_write_dump - Setup dump state of adapter
* @filp: open sysfs file
* @kobj: kobject struct
sysfs: add parameter "struct bin_attribute *" in .read/.write methods for sysfs binary attributes Well, first of all, I don't want to change so many files either. What I do: Adding a new parameter "struct bin_attribute *" in the .read/.write methods for the sysfs binary attributes. In fact, only the four lines change in fs/sysfs/bin.c and include/linux/sysfs.h do the real work. But I have to update all the files that use binary attributes to make them compatible with the new .read and .write methods. I'm not sure if I missed any. :( Why I do this: For a sysfs attribute, we can get a pointer pointing to the struct attribute in the .show/.store method, while we can't do this for the binary attributes. I don't know why this is different, but this does make it not so handy to use the binary attributes as the regular ones. So I think this patch is reasonable. :) Who benefits from it: The patch that exposes ACPI tables in sysfs requires such an improvement. All the table binary attributes share the same .read method. Parameter "struct bin_attribute *" is used to get the table signature and instance number which are used to distinguish different ACPI table binary attributes. Without this parameter, we need to offer different .read methods for different ACPI table binary attributes. This is impossible as there are various ACPI tables on different platforms, and we don't know what they are until they are loaded. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-09 07:57:22 +02:00
* @bin_attr: bin_attribute struct
* @buf: buffer
* @off: offset
* @count: buffer size
*
* Return value:
* number of bytes printed to buffer
**/
static ssize_t ipr_write_dump(struct file *filp, struct kobject *kobj,
sysfs: add parameter "struct bin_attribute *" in .read/.write methods for sysfs binary attributes Well, first of all, I don't want to change so many files either. What I do: Adding a new parameter "struct bin_attribute *" in the .read/.write methods for the sysfs binary attributes. In fact, only the four lines change in fs/sysfs/bin.c and include/linux/sysfs.h do the real work. But I have to update all the files that use binary attributes to make them compatible with the new .read and .write methods. I'm not sure if I missed any. :( Why I do this: For a sysfs attribute, we can get a pointer pointing to the struct attribute in the .show/.store method, while we can't do this for the binary attributes. I don't know why this is different, but this does make it not so handy to use the binary attributes as the regular ones. So I think this patch is reasonable. :) Who benefits from it: The patch that exposes ACPI tables in sysfs requires such an improvement. All the table binary attributes share the same .read method. Parameter "struct bin_attribute *" is used to get the table signature and instance number which are used to distinguish different ACPI table binary attributes. Without this parameter, we need to offer different .read methods for different ACPI table binary attributes. This is impossible as there are various ACPI tables on different platforms, and we don't know what they are until they are loaded. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-09 07:57:22 +02:00
struct bin_attribute *bin_attr,
char *buf, loff_t off, size_t count)
{
struct device *cdev = container_of(kobj, struct device, kobj);
struct Scsi_Host *shost = class_to_shost(cdev);
struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
int rc;
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
if (buf[0] == '1')
rc = ipr_alloc_dump(ioa_cfg);
else if (buf[0] == '0')
rc = ipr_free_dump(ioa_cfg);
else
return -EINVAL;
if (rc)
return rc;
else
return count;
}
static struct bin_attribute ipr_dump_attr = {
.attr = {
.name = "dump",
.mode = S_IRUSR | S_IWUSR,
},
.size = 0,
.read = ipr_read_dump,
.write = ipr_write_dump
};
#else
static int ipr_free_dump(struct ipr_ioa_cfg *ioa_cfg) { return 0; };
#endif
/**
* ipr_change_queue_depth - Change the device's queue depth
* @sdev: scsi device struct
* @qdepth: depth to set
* @reason: calling context
*
* Return value:
* actual depth set
**/
static int ipr_change_queue_depth(struct scsi_device *sdev, int qdepth,
int reason)
{
struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)sdev->host->hostdata;
struct ipr_resource_entry *res;
unsigned long lock_flags = 0;
if (reason != SCSI_QDEPTH_DEFAULT)
return -EOPNOTSUPP;
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
res = (struct ipr_resource_entry *)sdev->hostdata;
if (res && ipr_is_gata(res) && qdepth > IPR_MAX_CMD_PER_ATA_LUN)
qdepth = IPR_MAX_CMD_PER_ATA_LUN;
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
return sdev->queue_depth;
}
/**
* ipr_change_queue_type - Change the device's queue type
* @dsev: scsi device struct
* @tag_type: type of tags to use
*
* Return value:
* actual queue type set
**/
static int ipr_change_queue_type(struct scsi_device *sdev, int tag_type)
{
struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)sdev->host->hostdata;
struct ipr_resource_entry *res;
unsigned long lock_flags = 0;
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
res = (struct ipr_resource_entry *)sdev->hostdata;
if (res) {
if (ipr_is_gscsi(res) && sdev->tagged_supported) {
/*
* We don't bother quiescing the device here since the
* adapter firmware does it for us.
*/
scsi_set_tag_type(sdev, tag_type);
if (tag_type)
scsi_activate_tcq(sdev, sdev->queue_depth);
else
scsi_deactivate_tcq(sdev, sdev->queue_depth);
} else
tag_type = 0;
} else
tag_type = 0;
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return tag_type;
}
/**
* ipr_show_adapter_handle - Show the adapter's resource handle for this device
* @dev: device struct
* @attr: device attribute structure
* @buf: buffer
*
* Return value:
* number of bytes printed to buffer
**/
static ssize_t ipr_show_adapter_handle(struct device *dev, struct device_attribute *attr, char *buf)
{
struct scsi_device *sdev = to_scsi_device(dev);
struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)sdev->host->hostdata;
struct ipr_resource_entry *res;
unsigned long lock_flags = 0;
ssize_t len = -ENXIO;
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
res = (struct ipr_resource_entry *)sdev->hostdata;
if (res)
len = snprintf(buf, PAGE_SIZE, "%08X\n", res->res_handle);
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return len;
}
static struct device_attribute ipr_adapter_handle_attr = {
.attr = {
.name = "adapter_handle",
.mode = S_IRUSR,
},
.show = ipr_show_adapter_handle
};
/**
* ipr_show_resource_path - Show the resource path or the resource address for
* this device.
* @dev: device struct
* @attr: device attribute structure
* @buf: buffer
*
* Return value:
* number of bytes printed to buffer
**/
static ssize_t ipr_show_resource_path(struct device *dev, struct device_attribute *attr, char *buf)
{
struct scsi_device *sdev = to_scsi_device(dev);
struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)sdev->host->hostdata;
struct ipr_resource_entry *res;
unsigned long lock_flags = 0;
ssize_t len = -ENXIO;
char buffer[IPR_MAX_RES_PATH_LENGTH];
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
res = (struct ipr_resource_entry *)sdev->hostdata;
if (res && ioa_cfg->sis64)
len = snprintf(buf, PAGE_SIZE, "%s\n",
ipr_format_res_path(res->res_path, buffer,
sizeof(buffer)));
else if (res)
len = snprintf(buf, PAGE_SIZE, "%d:%d:%d:%d\n", ioa_cfg->host->host_no,
res->bus, res->target, res->lun);
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return len;
}
static struct device_attribute ipr_resource_path_attr = {
.attr = {
.name = "resource_path",
.mode = S_IRUGO,
},
.show = ipr_show_resource_path
};
/**
* ipr_show_device_id - Show the device_id for this device.
* @dev: device struct
* @attr: device attribute structure
* @buf: buffer
*
* Return value:
* number of bytes printed to buffer
**/
static ssize_t ipr_show_device_id(struct device *dev, struct device_attribute *attr, char *buf)
{
struct scsi_device *sdev = to_scsi_device(dev);
struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)sdev->host->hostdata;
struct ipr_resource_entry *res;
unsigned long lock_flags = 0;
ssize_t len = -ENXIO;
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
res = (struct ipr_resource_entry *)sdev->hostdata;
if (res && ioa_cfg->sis64)
len = snprintf(buf, PAGE_SIZE, "0x%llx\n", res->dev_id);
else if (res)
len = snprintf(buf, PAGE_SIZE, "0x%llx\n", res->lun_wwn);
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return len;
}
static struct device_attribute ipr_device_id_attr = {
.attr = {
.name = "device_id",
.mode = S_IRUGO,
},
.show = ipr_show_device_id
};
/**
* ipr_show_resource_type - Show the resource type for this device.
* @dev: device struct
* @attr: device attribute structure
* @buf: buffer
*
* Return value:
* number of bytes printed to buffer
**/
static ssize_t ipr_show_resource_type(struct device *dev, struct device_attribute *attr, char *buf)
{
struct scsi_device *sdev = to_scsi_device(dev);
struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)sdev->host->hostdata;
struct ipr_resource_entry *res;
unsigned long lock_flags = 0;
ssize_t len = -ENXIO;
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
res = (struct ipr_resource_entry *)sdev->hostdata;
if (res)
len = snprintf(buf, PAGE_SIZE, "%x\n", res->type);
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return len;
}
static struct device_attribute ipr_resource_type_attr = {
.attr = {
.name = "resource_type",
.mode = S_IRUGO,
},
.show = ipr_show_resource_type
};
static struct device_attribute *ipr_dev_attrs[] = {
&ipr_adapter_handle_attr,
&ipr_resource_path_attr,
&ipr_device_id_attr,
&ipr_resource_type_attr,
NULL,
};
/**
* ipr_biosparam - Return the HSC mapping
* @sdev: scsi device struct
* @block_device: block device pointer
* @capacity: capacity of the device
* @parm: Array containing returned HSC values.
*
* This function generates the HSC parms that fdisk uses.
* We want to make sure we return something that places partitions
* on 4k boundaries for best performance with the IOA.
*
* Return value:
* 0 on success
**/
static int ipr_biosparam(struct scsi_device *sdev,
struct block_device *block_device,
sector_t capacity, int *parm)
{
int heads, sectors;
sector_t cylinders;
heads = 128;
sectors = 32;
cylinders = capacity;
sector_div(cylinders, (128 * 32));
/* return result */
parm[0] = heads;
parm[1] = sectors;
parm[2] = cylinders;
return 0;
}
/**
* ipr_find_starget - Find target based on bus/target.
* @starget: scsi target struct
*
* Return value:
* resource entry pointer if found / NULL if not found
**/
static struct ipr_resource_entry *ipr_find_starget(struct scsi_target *starget)
{
struct Scsi_Host *shost = dev_to_shost(&starget->dev);
struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) shost->hostdata;
struct ipr_resource_entry *res;
list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
if ((res->bus == starget->channel) &&
(res->target == starget->id) &&
(res->lun == 0)) {
return res;
}
}
return NULL;
}
static struct ata_port_info sata_port_info;
/**
* ipr_target_alloc - Prepare for commands to a SCSI target
* @starget: scsi target struct
*
* If the device is a SATA device, this function allocates an
* ATA port with libata, else it does nothing.
*
* Return value:
* 0 on success / non-0 on failure
**/
static int ipr_target_alloc(struct scsi_target *starget)
{
struct Scsi_Host *shost = dev_to_shost(&starget->dev);
struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) shost->hostdata;
struct ipr_sata_port *sata_port;
struct ata_port *ap;
struct ipr_resource_entry *res;
unsigned long lock_flags;
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
res = ipr_find_starget(starget);
starget->hostdata = NULL;
if (res && ipr_is_gata(res)) {
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
sata_port = kzalloc(sizeof(*sata_port), GFP_KERNEL);
if (!sata_port)
return -ENOMEM;
ap = ata_sas_port_alloc(&ioa_cfg->ata_host, &sata_port_info, shost);
if (ap) {
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
sata_port->ioa_cfg = ioa_cfg;
sata_port->ap = ap;
sata_port->res = res;
res->sata_port = sata_port;
ap->private_data = sata_port;
starget->hostdata = sata_port;
} else {
kfree(sata_port);
return -ENOMEM;
}
}
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return 0;
}
/**
* ipr_target_destroy - Destroy a SCSI target
* @starget: scsi target struct
*
* If the device was a SATA device, this function frees the libata
* ATA port, else it does nothing.
*
**/
static void ipr_target_destroy(struct scsi_target *starget)
{
struct ipr_sata_port *sata_port = starget->hostdata;
struct Scsi_Host *shost = dev_to_shost(&starget->dev);
struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) shost->hostdata;
if (ioa_cfg->sis64) {
if (starget->channel == IPR_ARRAY_VIRTUAL_BUS)
clear_bit(starget->id, ioa_cfg->array_ids);
else if (starget->channel == IPR_VSET_VIRTUAL_BUS)
clear_bit(starget->id, ioa_cfg->vset_ids);
else if (starget->channel == 0)
clear_bit(starget->id, ioa_cfg->target_ids);
}
if (sata_port) {
starget->hostdata = NULL;
ata_sas_port_destroy(sata_port->ap);
kfree(sata_port);
}
}
/**
* ipr_find_sdev - Find device based on bus/target/lun.
* @sdev: scsi device struct
*
* Return value:
* resource entry pointer if found / NULL if not found
**/
static struct ipr_resource_entry *ipr_find_sdev(struct scsi_device *sdev)
{
struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) sdev->host->hostdata;
struct ipr_resource_entry *res;
list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
if ((res->bus == sdev->channel) &&
(res->target == sdev->id) &&
(res->lun == sdev->lun))
return res;
}
return NULL;
}
/**
* ipr_slave_destroy - Unconfigure a SCSI device
* @sdev: scsi device struct
*
* Return value:
* nothing
**/
static void ipr_slave_destroy(struct scsi_device *sdev)
{
struct ipr_resource_entry *res;
struct ipr_ioa_cfg *ioa_cfg;
unsigned long lock_flags = 0;
ioa_cfg = (struct ipr_ioa_cfg *) sdev->host->hostdata;
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
res = (struct ipr_resource_entry *) sdev->hostdata;
if (res) {
if (res->sata_port)
res->sata_port->ap->link.device[0].class = ATA_DEV_NONE;
sdev->hostdata = NULL;
res->sdev = NULL;
res->sata_port = NULL;
}
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
}
/**
* ipr_slave_configure - Configure a SCSI device
* @sdev: scsi device struct
*
* This function configures the specified scsi device.
*
* Return value:
* 0 on success
**/
static int ipr_slave_configure(struct scsi_device *sdev)
{
struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) sdev->host->hostdata;
struct ipr_resource_entry *res;
struct ata_port *ap = NULL;
unsigned long lock_flags = 0;
char buffer[IPR_MAX_RES_PATH_LENGTH];
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
res = sdev->hostdata;
if (res) {
if (ipr_is_af_dasd_device(res))
sdev->type = TYPE_RAID;
if (ipr_is_af_dasd_device(res) || ipr_is_ioa_resource(res)) {
sdev->scsi_level = 4;
sdev->no_uld_attach = 1;
}
if (ipr_is_vset_device(res)) {
blk_queue_rq_timeout(sdev->request_queue,
IPR_VSET_RW_TIMEOUT);
blk_queue_max_hw_sectors(sdev->request_queue, IPR_VSET_MAX_SECTORS);
}
if (ipr_is_gata(res) && res->sata_port)
ap = res->sata_port->ap;
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
if (ap) {
scsi_adjust_queue_depth(sdev, 0, IPR_MAX_CMD_PER_ATA_LUN);
ata_sas_slave_configure(sdev, ap);
} else
scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun);
if (ioa_cfg->sis64)
sdev_printk(KERN_INFO, sdev, "Resource path: %s\n",
ipr_format_res_path(res->res_path, buffer,
sizeof(buffer)));
return 0;
}
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return 0;
}
/**
* ipr_ata_slave_alloc - Prepare for commands to a SATA device
* @sdev: scsi device struct
*
* This function initializes an ATA port so that future commands
* sent through queuecommand will work.
*
* Return value:
* 0 on success
**/
static int ipr_ata_slave_alloc(struct scsi_device *sdev)
{
struct ipr_sata_port *sata_port = NULL;
int rc = -ENXIO;
ENTER;
if (sdev->sdev_target)
sata_port = sdev->sdev_target->hostdata;
if (sata_port)
rc = ata_sas_port_init(sata_port->ap);
if (rc)
ipr_slave_destroy(sdev);
LEAVE;
return rc;
}
/**
* ipr_slave_alloc - Prepare for commands to a device.
* @sdev: scsi device struct
*
* This function saves a pointer to the resource entry
* in the scsi device struct if the device exists. We
* can then use this pointer in ipr_queuecommand when
* handling new commands.
*
* Return value:
* 0 on success / -ENXIO if device does not exist
**/
static int ipr_slave_alloc(struct scsi_device *sdev)
{
struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) sdev->host->hostdata;
struct ipr_resource_entry *res;
unsigned long lock_flags;
int rc = -ENXIO;
sdev->hostdata = NULL;
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
res = ipr_find_sdev(sdev);
if (res) {
res->sdev = sdev;
res->add_to_ml = 0;
res->in_erp = 0;
sdev->hostdata = res;
if (!ipr_is_naca_model(res))
res->needs_sync_complete = 1;
rc = 0;
if (ipr_is_gata(res)) {
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return ipr_ata_slave_alloc(sdev);
}
}
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return rc;
}
/**
* ipr_eh_host_reset - Reset the host adapter
* @scsi_cmd: scsi command struct
*
* Return value:
* SUCCESS / FAILED
**/
static int __ipr_eh_host_reset(struct scsi_cmnd * scsi_cmd)
{
struct ipr_ioa_cfg *ioa_cfg;
int rc;
ENTER;
ioa_cfg = (struct ipr_ioa_cfg *) scsi_cmd->device->host->hostdata;
dev_err(&ioa_cfg->pdev->dev,
"Adapter being reset as a result of error recovery.\n");
if (WAIT_FOR_DUMP == ioa_cfg->sdt_state)
ioa_cfg->sdt_state = GET_DUMP;
rc = ipr_reset_reload(ioa_cfg, IPR_SHUTDOWN_ABBREV);
LEAVE;
return rc;
}
static int ipr_eh_host_reset(struct scsi_cmnd * cmd)
{
int rc;
spin_lock_irq(cmd->device->host->host_lock);
rc = __ipr_eh_host_reset(cmd);
spin_unlock_irq(cmd->device->host->host_lock);
return rc;
}
/**
* ipr_device_reset - Reset the device
* @ioa_cfg: ioa config struct
* @res: resource entry struct
*
* This function issues a device reset to the affected device.
* If the device is a SCSI device, a LUN reset will be sent
* to the device first. If that does not work, a target reset
* will be sent. If the device is a SATA device, a PHY reset will
* be sent.
*
* Return value:
* 0 on success / non-zero on failure
**/
static int ipr_device_reset(struct ipr_ioa_cfg *ioa_cfg,
struct ipr_resource_entry *res)
{
struct ipr_cmnd *ipr_cmd;
struct ipr_ioarcb *ioarcb;
struct ipr_cmd_pkt *cmd_pkt;
struct ipr_ioarcb_ata_regs *regs;
u32 ioasc;
ENTER;
ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg);
ioarcb = &ipr_cmd->ioarcb;
cmd_pkt = &ioarcb->cmd_pkt;
if (ipr_cmd->ioa_cfg->sis64) {
regs = &ipr_cmd->i.ata_ioadl.regs;
ioarcb->add_cmd_parms_offset = cpu_to_be16(sizeof(*ioarcb));
} else
regs = &ioarcb->u.add_data.u.regs;
ioarcb->res_handle = res->res_handle;
cmd_pkt->request_type = IPR_RQTYPE_IOACMD;
cmd_pkt->cdb[0] = IPR_RESET_DEVICE;
if (ipr_is_gata(res)) {
cmd_pkt->cdb[2] = IPR_ATA_PHY_RESET;
ioarcb->add_cmd_parms_len = cpu_to_be16(sizeof(regs->flags));
regs->flags |= IPR_ATA_FLAG_STATUS_ON_GOOD_COMPLETION;
}
ipr_send_blocking_cmd(ipr_cmd, ipr_timeout, IPR_DEVICE_RESET_TIMEOUT);
ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc);
list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
if (ipr_is_gata(res) && res->sata_port && ioasc != IPR_IOASC_IOA_WAS_RESET) {
if (ipr_cmd->ioa_cfg->sis64)
memcpy(&res->sata_port->ioasa, &ipr_cmd->s.ioasa64.u.gata,
sizeof(struct ipr_ioasa_gata));
else
memcpy(&res->sata_port->ioasa, &ipr_cmd->s.ioasa.u.gata,
sizeof(struct ipr_ioasa_gata));
}
LEAVE;
return (IPR_IOASC_SENSE_KEY(ioasc) ? -EIO : 0);
}
/**
* ipr_sata_reset - Reset the SATA port
* @link: SATA link to reset
* @classes: class of the attached device
*
* This function issues a SATA phy reset to the affected ATA link.
*
* Return value:
* 0 on success / non-zero on failure
**/
static int ipr_sata_reset(struct ata_link *link, unsigned int *classes,
unsigned long deadline)
{
struct ipr_sata_port *sata_port = link->ap->private_data;
struct ipr_ioa_cfg *ioa_cfg = sata_port->ioa_cfg;
struct ipr_resource_entry *res;
unsigned long lock_flags = 0;
int rc = -ENXIO;
ENTER;
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
while(ioa_cfg->in_reset_reload) {
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
}
res = sata_port->res;
if (res) {
rc = ipr_device_reset(ioa_cfg, res);
*classes = res->ata_class;
}
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
LEAVE;
return rc;
}
/**
* ipr_eh_dev_reset - Reset the device
* @scsi_cmd: scsi command struct
*
* This function issues a device reset to the affected device.
* A LUN reset will be sent to the device first. If that does
* not work, a target reset will be sent.
*
* Return value:
* SUCCESS / FAILED
**/
static int __ipr_eh_dev_reset(struct scsi_cmnd * scsi_cmd)
{
struct ipr_cmnd *ipr_cmd;
struct ipr_ioa_cfg *ioa_cfg;
struct ipr_resource_entry *res;
struct ata_port *ap;
int rc = 0;
ENTER;
ioa_cfg = (struct ipr_ioa_cfg *) scsi_cmd->device->host->hostdata;
res = scsi_cmd->device->hostdata;
if (!res)
return FAILED;
/*
* If we are currently going through reset/reload, return failed. This will force the
* mid-layer to call ipr_eh_host_reset, which will then go to sleep and wait for the
* reset to complete
*/
if (ioa_cfg->in_reset_reload)
return FAILED;
if (ioa_cfg->ioa_is_dead)
return FAILED;
list_for_each_entry(ipr_cmd, &ioa_cfg->pending_q, queue) {
if (ipr_cmd->ioarcb.res_handle == res->res_handle) {
if (ipr_cmd->scsi_cmd)
ipr_cmd->done = ipr_scsi_eh_done;
if (ipr_cmd->qc)
ipr_cmd->done = ipr_sata_eh_done;
if (ipr_cmd->qc && !(ipr_cmd->qc->flags & ATA_QCFLAG_FAILED)) {
ipr_cmd->qc->err_mask |= AC_ERR_TIMEOUT;
ipr_cmd->qc->flags |= ATA_QCFLAG_FAILED;
}
}
}
res->resetting_device = 1;
scmd_printk(KERN_ERR, scsi_cmd, "Resetting device\n");
if (ipr_is_gata(res) && res->sata_port) {
ap = res->sata_port->ap;
spin_unlock_irq(scsi_cmd->device->host->host_lock);
libata: make reset related methods proper port operations Currently reset methods are not specified directly in the ata_port_operations table. If a LLD wants to use custom reset methods, it should construct and use a error_handler which uses those reset methods. It's done this way for two reasons. First, the ops table already contained too many methods and adding four more of them would noticeably increase the amount of necessary boilerplate code all over low level drivers. Second, as ->error_handler uses those reset methods, it can get confusing. ie. By overriding ->error_handler, those reset ops can be made useless making layering a bit hazy. Now that ops table uses inheritance, the first problem doesn't exist anymore. The second isn't completely solved but is relieved by providing default values - most drivers can just override what it has implemented and don't have to concern itself about higher level callbacks. In fact, there currently is no driver which actually modifies error handling behavior. Drivers which override ->error_handler just wraps the standard error handler only to prepare the controller for EH. I don't think making ops layering strict has any noticeable benefit. This patch makes ->prereset, ->softreset, ->hardreset, ->postreset and their PMP counterparts propoer ops. Default ops are provided in the base ops tables and drivers are converted to override individual reset methods instead of creating custom error_handler. * ata_std_error_handler() doesn't use sata_std_hardreset() if SCRs aren't accessible. sata_promise doesn't need to use separate error_handlers for PATA and SATA anymore. * softreset is broken for sata_inic162x and sata_sx4. As libata now always prefers hardreset, this doesn't really matter but the ops are forced to NULL using ATA_OP_NULL for documentation purpose. * pata_hpt374 needs to use different prereset for the first and second PCI functions. This used to be done by branching from hpt374_error_handler(). The proper way to do this is to use separate ops and port_info tables for each function. Converted. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-03-25 04:22:50 +01:00
ata_std_error_handler(ap);
spin_lock_irq(scsi_cmd->device->host->host_lock);
list_for_each_entry(ipr_cmd, &ioa_cfg->pending_q, queue) {
if (ipr_cmd->ioarcb.res_handle == res->res_handle) {
rc = -EIO;
break;
}
}
} else
rc = ipr_device_reset(ioa_cfg, res);
res->resetting_device = 0;
LEAVE;
return (rc ? FAILED : SUCCESS);
}
static int ipr_eh_dev_reset(struct scsi_cmnd * cmd)
{
int rc;
spin_lock_irq(cmd->device->host->host_lock);
rc = __ipr_eh_dev_reset(cmd);
spin_unlock_irq(cmd->device->host->host_lock);
return rc;
}
/**
* ipr_bus_reset_done - Op done function for bus reset.
* @ipr_cmd: ipr command struct
*
* This function is the op done function for a bus reset
*
* Return value:
* none
**/
static void ipr_bus_reset_done(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
struct ipr_resource_entry *res;
ENTER;
if (!ioa_cfg->sis64)
list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
if (res->res_handle == ipr_cmd->ioarcb.res_handle) {
scsi_report_bus_reset(ioa_cfg->host, res->bus);
break;
}
}
/*
* If abort has not completed, indicate the reset has, else call the
* abort's done function to wake the sleeping eh thread
*/
if (ipr_cmd->sibling->sibling)
ipr_cmd->sibling->sibling = NULL;
else
ipr_cmd->sibling->done(ipr_cmd->sibling);
list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
LEAVE;
}
/**
* ipr_abort_timeout - An abort task has timed out
* @ipr_cmd: ipr command struct
*
* This function handles when an abort task times out. If this
* happens we issue a bus reset since we have resources tied
* up that must be freed before returning to the midlayer.
*
* Return value:
* none
**/
static void ipr_abort_timeout(struct ipr_cmnd *ipr_cmd)
{
struct ipr_cmnd *reset_cmd;
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
struct ipr_cmd_pkt *cmd_pkt;
unsigned long lock_flags = 0;
ENTER;
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
if (ipr_cmd->completion.done || ioa_cfg->in_reset_reload) {
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return;
}
sdev_printk(KERN_ERR, ipr_cmd->u.sdev, "Abort timed out. Resetting bus.\n");
reset_cmd = ipr_get_free_ipr_cmnd(ioa_cfg);
ipr_cmd->sibling = reset_cmd;
reset_cmd->sibling = ipr_cmd;
reset_cmd->ioarcb.res_handle = ipr_cmd->ioarcb.res_handle;
cmd_pkt = &reset_cmd->ioarcb.cmd_pkt;
cmd_pkt->request_type = IPR_RQTYPE_IOACMD;
cmd_pkt->cdb[0] = IPR_RESET_DEVICE;
cmd_pkt->cdb[2] = IPR_RESET_TYPE_SELECT | IPR_BUS_RESET;
ipr_do_req(reset_cmd, ipr_bus_reset_done, ipr_timeout, IPR_DEVICE_RESET_TIMEOUT);
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
LEAVE;
}
/**
* ipr_cancel_op - Cancel specified op
* @scsi_cmd: scsi command struct
*
* This function cancels specified op.
*
* Return value:
* SUCCESS / FAILED
**/
static int ipr_cancel_op(struct scsi_cmnd * scsi_cmd)
{
struct ipr_cmnd *ipr_cmd;
struct ipr_ioa_cfg *ioa_cfg;
struct ipr_resource_entry *res;
struct ipr_cmd_pkt *cmd_pkt;
u32 ioasc;
int op_found = 0;
ENTER;
ioa_cfg = (struct ipr_ioa_cfg *)scsi_cmd->device->host->hostdata;
res = scsi_cmd->device->hostdata;
/* If we are currently going through reset/reload, return failed.
* This will force the mid-layer to call ipr_eh_host_reset,
* which will then go to sleep and wait for the reset to complete
*/
if (ioa_cfg->in_reset_reload || ioa_cfg->ioa_is_dead)
return FAILED;
if (!res || !ipr_is_gscsi(res))
return FAILED;
list_for_each_entry(ipr_cmd, &ioa_cfg->pending_q, queue) {
if (ipr_cmd->scsi_cmd == scsi_cmd) {
ipr_cmd->done = ipr_scsi_eh_done;
op_found = 1;
break;
}
}
if (!op_found)
return SUCCESS;
ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg);
ipr_cmd->ioarcb.res_handle = res->res_handle;
cmd_pkt = &ipr_cmd->ioarcb.cmd_pkt;
cmd_pkt->request_type = IPR_RQTYPE_IOACMD;
cmd_pkt->cdb[0] = IPR_CANCEL_ALL_REQUESTS;
ipr_cmd->u.sdev = scsi_cmd->device;
scmd_printk(KERN_ERR, scsi_cmd, "Aborting command: %02X\n",
scsi_cmd->cmnd[0]);
ipr_send_blocking_cmd(ipr_cmd, ipr_abort_timeout, IPR_CANCEL_ALL_TIMEOUT);
ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc);
/*
* If the abort task timed out and we sent a bus reset, we will get
* one the following responses to the abort
*/
if (ioasc == IPR_IOASC_BUS_WAS_RESET || ioasc == IPR_IOASC_SYNC_REQUIRED) {
ioasc = 0;
ipr_trace;
}
list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
if (!ipr_is_naca_model(res))
res->needs_sync_complete = 1;
LEAVE;
return (IPR_IOASC_SENSE_KEY(ioasc) ? FAILED : SUCCESS);
}
/**
* ipr_eh_abort - Abort a single op
* @scsi_cmd: scsi command struct
*
* Return value:
* SUCCESS / FAILED
**/
static int ipr_eh_abort(struct scsi_cmnd * scsi_cmd)
{
unsigned long flags;
int rc;
ENTER;
spin_lock_irqsave(scsi_cmd->device->host->host_lock, flags);
rc = ipr_cancel_op(scsi_cmd);
spin_unlock_irqrestore(scsi_cmd->device->host->host_lock, flags);
LEAVE;
return rc;
}
/**
* ipr_handle_other_interrupt - Handle "other" interrupts
* @ioa_cfg: ioa config struct
* @int_reg: interrupt register
*
* Return value:
* IRQ_NONE / IRQ_HANDLED
**/
static irqreturn_t ipr_handle_other_interrupt(struct ipr_ioa_cfg *ioa_cfg,
volatile u32 int_reg)
{
irqreturn_t rc = IRQ_HANDLED;
if (int_reg & IPR_PCII_IOA_TRANS_TO_OPER) {
/* Mask the interrupt */
writel(IPR_PCII_IOA_TRANS_TO_OPER, ioa_cfg->regs.set_interrupt_mask_reg);
/* Clear the interrupt */
writel(IPR_PCII_IOA_TRANS_TO_OPER, ioa_cfg->regs.clr_interrupt_reg);
int_reg = readl(ioa_cfg->regs.sense_interrupt_reg);
list_del(&ioa_cfg->reset_cmd->queue);
del_timer(&ioa_cfg->reset_cmd->timer);
ipr_reset_ioa_job(ioa_cfg->reset_cmd);
} else {
if (int_reg & IPR_PCII_IOA_UNIT_CHECKED)
ioa_cfg->ioa_unit_checked = 1;
else
dev_err(&ioa_cfg->pdev->dev,
"Permanent IOA failure. 0x%08X\n", int_reg);
if (WAIT_FOR_DUMP == ioa_cfg->sdt_state)
ioa_cfg->sdt_state = GET_DUMP;
ipr_mask_and_clear_interrupts(ioa_cfg, ~0);
ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
}
return rc;
}
/**
* ipr_isr_eh - Interrupt service routine error handler
* @ioa_cfg: ioa config struct
* @msg: message to log
*
* Return value:
* none
**/
static void ipr_isr_eh(struct ipr_ioa_cfg *ioa_cfg, char *msg)
{
ioa_cfg->errors_logged++;
dev_err(&ioa_cfg->pdev->dev, "%s\n", msg);
if (WAIT_FOR_DUMP == ioa_cfg->sdt_state)
ioa_cfg->sdt_state = GET_DUMP;
ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
}
/**
* ipr_isr - Interrupt service routine
* @irq: irq number
* @devp: pointer to ioa config struct
*
* Return value:
* IRQ_NONE / IRQ_HANDLED
**/
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:55:46 +02:00
static irqreturn_t ipr_isr(int irq, void *devp)
{
struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)devp;
unsigned long lock_flags = 0;
volatile u32 int_reg, int_mask_reg;
u32 ioasc;
u16 cmd_index;
int num_hrrq = 0;
struct ipr_cmnd *ipr_cmd;
irqreturn_t rc = IRQ_NONE;
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
/* If interrupts are disabled, ignore the interrupt */
if (!ioa_cfg->allow_interrupts) {
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return IRQ_NONE;
}
int_mask_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg32);
int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32) & ~int_mask_reg;
/* If an interrupt on the adapter did not occur, ignore it.
* Or in the case of SIS 64, check for a stage change interrupt.
*/
if (unlikely((int_reg & IPR_PCII_OPER_INTERRUPTS) == 0)) {
if (ioa_cfg->sis64) {
int_mask_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg);
int_reg = readl(ioa_cfg->regs.sense_interrupt_reg) & ~int_mask_reg;
if (int_reg & IPR_PCII_IPL_STAGE_CHANGE) {
/* clear stage change */
writel(IPR_PCII_IPL_STAGE_CHANGE, ioa_cfg->regs.clr_interrupt_reg);
int_reg = readl(ioa_cfg->regs.sense_interrupt_reg) & ~int_mask_reg;
list_del(&ioa_cfg->reset_cmd->queue);
del_timer(&ioa_cfg->reset_cmd->timer);
ipr_reset_ioa_job(ioa_cfg->reset_cmd);
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return IRQ_HANDLED;
}
}
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return IRQ_NONE;
}
while (1) {
ipr_cmd = NULL;
while ((be32_to_cpu(*ioa_cfg->hrrq_curr) & IPR_HRRQ_TOGGLE_BIT) ==
ioa_cfg->toggle_bit) {
cmd_index = (be32_to_cpu(*ioa_cfg->hrrq_curr) &
IPR_HRRQ_REQ_RESP_HANDLE_MASK) >> IPR_HRRQ_REQ_RESP_HANDLE_SHIFT;
if (unlikely(cmd_index >= IPR_NUM_CMD_BLKS)) {
ipr_isr_eh(ioa_cfg, "Invalid response handle from IOA");
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return IRQ_HANDLED;
}
ipr_cmd = ioa_cfg->ipr_cmnd_list[cmd_index];
ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc);
ipr_trc_hook(ipr_cmd, IPR_TRACE_FINISH, ioasc);
list_del(&ipr_cmd->queue);
del_timer(&ipr_cmd->timer);
ipr_cmd->done(ipr_cmd);
rc = IRQ_HANDLED;
if (ioa_cfg->hrrq_curr < ioa_cfg->hrrq_end) {
ioa_cfg->hrrq_curr++;
} else {
ioa_cfg->hrrq_curr = ioa_cfg->hrrq_start;
ioa_cfg->toggle_bit ^= 1u;
}
}
if (ipr_cmd != NULL) {
/* Clear the PCI interrupt */
do {
writel(IPR_PCII_HRRQ_UPDATED, ioa_cfg->regs.clr_interrupt_reg32);
int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32) & ~int_mask_reg;
} while (int_reg & IPR_PCII_HRRQ_UPDATED &&
num_hrrq++ < IPR_MAX_HRRQ_RETRIES);
if (int_reg & IPR_PCII_HRRQ_UPDATED) {
ipr_isr_eh(ioa_cfg, "Error clearing HRRQ");
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return IRQ_HANDLED;
}
} else
break;
}
if (unlikely(rc == IRQ_NONE))
rc = ipr_handle_other_interrupt(ioa_cfg, int_reg);
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return rc;
}
/**
* ipr_build_ioadl64 - Build a scatter/gather list and map the buffer
* @ioa_cfg: ioa config struct
* @ipr_cmd: ipr command struct
*
* Return value:
* 0 on success / -1 on failure
**/
static int ipr_build_ioadl64(struct ipr_ioa_cfg *ioa_cfg,
struct ipr_cmnd *ipr_cmd)
{
int i, nseg;
struct scatterlist *sg;
u32 length;
u32 ioadl_flags = 0;
struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd;
struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
struct ipr_ioadl64_desc *ioadl64 = ipr_cmd->i.ioadl64;
length = scsi_bufflen(scsi_cmd);
if (!length)
return 0;
nseg = scsi_dma_map(scsi_cmd);
if (nseg < 0) {
dev_err(&ioa_cfg->pdev->dev, "pci_map_sg failed!\n");
return -1;
}
ipr_cmd->dma_use_sg = nseg;
ioarcb->data_transfer_length = cpu_to_be32(length);
ioarcb->ioadl_len =
cpu_to_be32(sizeof(struct ipr_ioadl64_desc) * ipr_cmd->dma_use_sg);
if (scsi_cmd->sc_data_direction == DMA_TO_DEVICE) {
ioadl_flags = IPR_IOADL_FLAGS_WRITE;
ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ;
} else if (scsi_cmd->sc_data_direction == DMA_FROM_DEVICE)
ioadl_flags = IPR_IOADL_FLAGS_READ;
scsi_for_each_sg(scsi_cmd, sg, ipr_cmd->dma_use_sg, i) {
ioadl64[i].flags = cpu_to_be32(ioadl_flags);
ioadl64[i].data_len = cpu_to_be32(sg_dma_len(sg));
ioadl64[i].address = cpu_to_be64(sg_dma_address(sg));
}
ioadl64[i-1].flags |= cpu_to_be32(IPR_IOADL_FLAGS_LAST);
return 0;
}
/**
* ipr_build_ioadl - Build a scatter/gather list and map the buffer
* @ioa_cfg: ioa config struct
* @ipr_cmd: ipr command struct
*
* Return value:
* 0 on success / -1 on failure
**/
static int ipr_build_ioadl(struct ipr_ioa_cfg *ioa_cfg,
struct ipr_cmnd *ipr_cmd)
{
int i, nseg;
struct scatterlist *sg;
u32 length;
u32 ioadl_flags = 0;
struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd;
struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
struct ipr_ioadl_desc *ioadl = ipr_cmd->i.ioadl;
length = scsi_bufflen(scsi_cmd);
if (!length)
return 0;
nseg = scsi_dma_map(scsi_cmd);
if (nseg < 0) {
dev_err(&ioa_cfg->pdev->dev, "pci_map_sg failed!\n");
return -1;
}
ipr_cmd->dma_use_sg = nseg;
if (scsi_cmd->sc_data_direction == DMA_TO_DEVICE) {
ioadl_flags = IPR_IOADL_FLAGS_WRITE;
ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ;
ioarcb->data_transfer_length = cpu_to_be32(length);
ioarcb->ioadl_len =
cpu_to_be32(sizeof(struct ipr_ioadl_desc) * ipr_cmd->dma_use_sg);
} else if (scsi_cmd->sc_data_direction == DMA_FROM_DEVICE) {
ioadl_flags = IPR_IOADL_FLAGS_READ;
ioarcb->read_data_transfer_length = cpu_to_be32(length);
ioarcb->read_ioadl_len =
cpu_to_be32(sizeof(struct ipr_ioadl_desc) * ipr_cmd->dma_use_sg);
}
if (ipr_cmd->dma_use_sg <= ARRAY_SIZE(ioarcb->u.add_data.u.ioadl)) {
ioadl = ioarcb->u.add_data.u.ioadl;
ioarcb->write_ioadl_addr = cpu_to_be32((ipr_cmd->dma_addr) +
offsetof(struct ipr_ioarcb, u.add_data));
ioarcb->read_ioadl_addr = ioarcb->write_ioadl_addr;
}
scsi_for_each_sg(scsi_cmd, sg, ipr_cmd->dma_use_sg, i) {
ioadl[i].flags_and_data_len =
cpu_to_be32(ioadl_flags | sg_dma_len(sg));
ioadl[i].address = cpu_to_be32(sg_dma_address(sg));
}
ioadl[i-1].flags_and_data_len |= cpu_to_be32(IPR_IOADL_FLAGS_LAST);
return 0;
}
/**
* ipr_get_task_attributes - Translate SPI Q-Tag to task attributes
* @scsi_cmd: scsi command struct
*
* Return value:
* task attributes
**/
static u8 ipr_get_task_attributes(struct scsi_cmnd *scsi_cmd)
{
u8 tag[2];
u8 rc = IPR_FLAGS_LO_UNTAGGED_TASK;
if (scsi_populate_tag_msg(scsi_cmd, tag)) {
switch (tag[0]) {
case MSG_SIMPLE_TAG:
rc = IPR_FLAGS_LO_SIMPLE_TASK;
break;
case MSG_HEAD_TAG:
rc = IPR_FLAGS_LO_HEAD_OF_Q_TASK;
break;
case MSG_ORDERED_TAG:
rc = IPR_FLAGS_LO_ORDERED_TASK;
break;
};
}
return rc;
}
/**
* ipr_erp_done - Process completion of ERP for a device
* @ipr_cmd: ipr command struct
*
* This function copies the sense buffer into the scsi_cmd
* struct and pushes the scsi_done function.
*
* Return value:
* nothing
**/
static void ipr_erp_done(struct ipr_cmnd *ipr_cmd)
{
struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd;
struct ipr_resource_entry *res = scsi_cmd->device->hostdata;
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
u32 ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc);
if (IPR_IOASC_SENSE_KEY(ioasc) > 0) {
scsi_cmd->result |= (DID_ERROR << 16);
scmd_printk(KERN_ERR, scsi_cmd,
"Request Sense failed with IOASC: 0x%08X\n", ioasc);
} else {
memcpy(scsi_cmd->sense_buffer, ipr_cmd->sense_buffer,
SCSI_SENSE_BUFFERSIZE);
}
if (res) {
if (!ipr_is_naca_model(res))
res->needs_sync_complete = 1;
res->in_erp = 0;
}
scsi_dma_unmap(ipr_cmd->scsi_cmd);
list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
scsi_cmd->scsi_done(scsi_cmd);
}
/**
* ipr_reinit_ipr_cmnd_for_erp - Re-initialize a cmnd block to be used for ERP
* @ipr_cmd: ipr command struct
*
* Return value:
* none
**/
static void ipr_reinit_ipr_cmnd_for_erp(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
struct ipr_ioasa *ioasa = &ipr_cmd->s.ioasa;
dma_addr_t dma_addr = ipr_cmd->dma_addr;
memset(&ioarcb->cmd_pkt, 0, sizeof(struct ipr_cmd_pkt));
ioarcb->data_transfer_length = 0;
ioarcb->read_data_transfer_length = 0;
ioarcb->ioadl_len = 0;
ioarcb->read_ioadl_len = 0;
ioasa->hdr.ioasc = 0;
ioasa->hdr.residual_data_len = 0;
if (ipr_cmd->ioa_cfg->sis64)
ioarcb->u.sis64_addr_data.data_ioadl_addr =
cpu_to_be64(dma_addr + offsetof(struct ipr_cmnd, i.ioadl64));
else {
ioarcb->write_ioadl_addr =
cpu_to_be32(dma_addr + offsetof(struct ipr_cmnd, i.ioadl));
ioarcb->read_ioadl_addr = ioarcb->write_ioadl_addr;
}
}
/**
* ipr_erp_request_sense - Send request sense to a device
* @ipr_cmd: ipr command struct
*
* This function sends a request sense to a device as a result
* of a check condition.
*
* Return value:
* nothing
**/
static void ipr_erp_request_sense(struct ipr_cmnd *ipr_cmd)
{
struct ipr_cmd_pkt *cmd_pkt = &ipr_cmd->ioarcb.cmd_pkt;
u32 ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc);
if (IPR_IOASC_SENSE_KEY(ioasc) > 0) {
ipr_erp_done(ipr_cmd);
return;
}
ipr_reinit_ipr_cmnd_for_erp(ipr_cmd);
cmd_pkt->request_type = IPR_RQTYPE_SCSICDB;
cmd_pkt->cdb[0] = REQUEST_SENSE;
cmd_pkt->cdb[4] = SCSI_SENSE_BUFFERSIZE;
cmd_pkt->flags_hi |= IPR_FLAGS_HI_SYNC_OVERRIDE;
cmd_pkt->flags_hi |= IPR_FLAGS_HI_NO_ULEN_CHK;
cmd_pkt->timeout = cpu_to_be16(IPR_REQUEST_SENSE_TIMEOUT / HZ);
ipr_init_ioadl(ipr_cmd, ipr_cmd->sense_buffer_dma,
SCSI_SENSE_BUFFERSIZE, IPR_IOADL_FLAGS_READ_LAST);
ipr_do_req(ipr_cmd, ipr_erp_done, ipr_timeout,
IPR_REQUEST_SENSE_TIMEOUT * 2);
}
/**
* ipr_erp_cancel_all - Send cancel all to a device
* @ipr_cmd: ipr command struct
*
* This function sends a cancel all to a device to clear the
* queue. If we are running TCQ on the device, QERR is set to 1,
* which means all outstanding ops have been dropped on the floor.
* Cancel all will return them to us.
*
* Return value:
* nothing
**/
static void ipr_erp_cancel_all(struct ipr_cmnd *ipr_cmd)
{
struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd;
struct ipr_resource_entry *res = scsi_cmd->device->hostdata;
struct ipr_cmd_pkt *cmd_pkt;
res->in_erp = 1;
ipr_reinit_ipr_cmnd_for_erp(ipr_cmd);
if (!scsi_get_tag_type(scsi_cmd->device)) {
ipr_erp_request_sense(ipr_cmd);
return;
}
cmd_pkt = &ipr_cmd->ioarcb.cmd_pkt;
cmd_pkt->request_type = IPR_RQTYPE_IOACMD;
cmd_pkt->cdb[0] = IPR_CANCEL_ALL_REQUESTS;
ipr_do_req(ipr_cmd, ipr_erp_request_sense, ipr_timeout,
IPR_CANCEL_ALL_TIMEOUT);
}
/**
* ipr_dump_ioasa - Dump contents of IOASA
* @ioa_cfg: ioa config struct
* @ipr_cmd: ipr command struct
* @res: resource entry struct
*
* This function is invoked by the interrupt handler when ops
* fail. It will log the IOASA if appropriate. Only called
* for GPDD ops.
*
* Return value:
* none
**/
static void ipr_dump_ioasa(struct ipr_ioa_cfg *ioa_cfg,
struct ipr_cmnd *ipr_cmd, struct ipr_resource_entry *res)
{
int i;
u16 data_len;
u32 ioasc, fd_ioasc;
struct ipr_ioasa *ioasa = &ipr_cmd->s.ioasa;
__be32 *ioasa_data = (__be32 *)ioasa;
int error_index;
ioasc = be32_to_cpu(ioasa->hdr.ioasc) & IPR_IOASC_IOASC_MASK;
fd_ioasc = be32_to_cpu(ioasa->hdr.fd_ioasc) & IPR_IOASC_IOASC_MASK;
if (0 == ioasc)
return;
if (ioa_cfg->log_level < IPR_DEFAULT_LOG_LEVEL)
return;
if (ioasc == IPR_IOASC_BUS_WAS_RESET && fd_ioasc)
error_index = ipr_get_error(fd_ioasc);
else
error_index = ipr_get_error(ioasc);
if (ioa_cfg->log_level < IPR_MAX_LOG_LEVEL) {
/* Don't log an error if the IOA already logged one */
if (ioasa->hdr.ilid != 0)
return;
if (!ipr_is_gscsi(res))
return;
if (ipr_error_table[error_index].log_ioasa == 0)
return;
}
ipr_res_err(ioa_cfg, res, "%s\n", ipr_error_table[error_index].error);
data_len = be16_to_cpu(ioasa->hdr.ret_stat_len);
if (ioa_cfg->sis64 && sizeof(struct ipr_ioasa64) < data_len)
data_len = sizeof(struct ipr_ioasa64);
else if (!ioa_cfg->sis64 && sizeof(struct ipr_ioasa) < data_len)
data_len = sizeof(struct ipr_ioasa);
ipr_err("IOASA Dump:\n");
for (i = 0; i < data_len / 4; i += 4) {
ipr_err("%08X: %08X %08X %08X %08X\n", i*4,
be32_to_cpu(ioasa_data[i]),
be32_to_cpu(ioasa_data[i+1]),
be32_to_cpu(ioasa_data[i+2]),
be32_to_cpu(ioasa_data[i+3]));
}
}
/**
* ipr_gen_sense - Generate SCSI sense data from an IOASA
* @ioasa: IOASA
* @sense_buf: sense data buffer
*
* Return value:
* none
**/
static void ipr_gen_sense(struct ipr_cmnd *ipr_cmd)
{
u32 failing_lba;
u8 *sense_buf = ipr_cmd->scsi_cmd->sense_buffer;
struct ipr_resource_entry *res = ipr_cmd->scsi_cmd->device->hostdata;
struct ipr_ioasa *ioasa = &ipr_cmd->s.ioasa;
u32 ioasc = be32_to_cpu(ioasa->hdr.ioasc);
memset(sense_buf, 0, SCSI_SENSE_BUFFERSIZE);
if (ioasc >= IPR_FIRST_DRIVER_IOASC)
return;
ipr_cmd->scsi_cmd->result = SAM_STAT_CHECK_CONDITION;
if (ipr_is_vset_device(res) &&
ioasc == IPR_IOASC_MED_DO_NOT_REALLOC &&
ioasa->u.vset.failing_lba_hi != 0) {
sense_buf[0] = 0x72;
sense_buf[1] = IPR_IOASC_SENSE_KEY(ioasc);
sense_buf[2] = IPR_IOASC_SENSE_CODE(ioasc);
sense_buf[3] = IPR_IOASC_SENSE_QUAL(ioasc);
sense_buf[7] = 12;
sense_buf[8] = 0;
sense_buf[9] = 0x0A;
sense_buf[10] = 0x80;
failing_lba = be32_to_cpu(ioasa->u.vset.failing_lba_hi);
sense_buf[12] = (failing_lba & 0xff000000) >> 24;
sense_buf[13] = (failing_lba & 0x00ff0000) >> 16;
sense_buf[14] = (failing_lba & 0x0000ff00) >> 8;
sense_buf[15] = failing_lba & 0x000000ff;
failing_lba = be32_to_cpu(ioasa->u.vset.failing_lba_lo);
sense_buf[16] = (failing_lba & 0xff000000) >> 24;
sense_buf[17] = (failing_lba & 0x00ff0000) >> 16;
sense_buf[18] = (failing_lba & 0x0000ff00) >> 8;
sense_buf[19] = failing_lba & 0x000000ff;
} else {
sense_buf[0] = 0x70;
sense_buf[2] = IPR_IOASC_SENSE_KEY(ioasc);
sense_buf[12] = IPR_IOASC_SENSE_CODE(ioasc);
sense_buf[13] = IPR_IOASC_SENSE_QUAL(ioasc);
/* Illegal request */
if ((IPR_IOASC_SENSE_KEY(ioasc) == 0x05) &&
(be32_to_cpu(ioasa->hdr.ioasc_specific) & IPR_FIELD_POINTER_VALID)) {
sense_buf[7] = 10; /* additional length */
/* IOARCB was in error */
if (IPR_IOASC_SENSE_CODE(ioasc) == 0x24)
sense_buf[15] = 0xC0;
else /* Parameter data was invalid */
sense_buf[15] = 0x80;
sense_buf[16] =
((IPR_FIELD_POINTER_MASK &
be32_to_cpu(ioasa->hdr.ioasc_specific)) >> 8) & 0xff;
sense_buf[17] =
(IPR_FIELD_POINTER_MASK &
be32_to_cpu(ioasa->hdr.ioasc_specific)) & 0xff;
} else {
if (ioasc == IPR_IOASC_MED_DO_NOT_REALLOC) {
if (ipr_is_vset_device(res))
failing_lba = be32_to_cpu(ioasa->u.vset.failing_lba_lo);
else
failing_lba = be32_to_cpu(ioasa->u.dasd.failing_lba);
sense_buf[0] |= 0x80; /* Or in the Valid bit */
sense_buf[3] = (failing_lba & 0xff000000) >> 24;
sense_buf[4] = (failing_lba & 0x00ff0000) >> 16;
sense_buf[5] = (failing_lba & 0x0000ff00) >> 8;
sense_buf[6] = failing_lba & 0x000000ff;
}
sense_buf[7] = 6; /* additional length */
}
}
}
/**
* ipr_get_autosense - Copy autosense data to sense buffer
* @ipr_cmd: ipr command struct
*
* This function copies the autosense buffer to the buffer
* in the scsi_cmd, if there is autosense available.
*
* Return value:
* 1 if autosense was available / 0 if not
**/
static int ipr_get_autosense(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioasa *ioasa = &ipr_cmd->s.ioasa;
struct ipr_ioasa64 *ioasa64 = &ipr_cmd->s.ioasa64;
if ((be32_to_cpu(ioasa->hdr.ioasc_specific) & IPR_AUTOSENSE_VALID) == 0)
return 0;
if (ipr_cmd->ioa_cfg->sis64)
memcpy(ipr_cmd->scsi_cmd->sense_buffer, ioasa64->auto_sense.data,
min_t(u16, be16_to_cpu(ioasa64->auto_sense.auto_sense_len),
SCSI_SENSE_BUFFERSIZE));
else
memcpy(ipr_cmd->scsi_cmd->sense_buffer, ioasa->auto_sense.data,
min_t(u16, be16_to_cpu(ioasa->auto_sense.auto_sense_len),
SCSI_SENSE_BUFFERSIZE));
return 1;
}
/**
* ipr_erp_start - Process an error response for a SCSI op
* @ioa_cfg: ioa config struct
* @ipr_cmd: ipr command struct
*
* This function determines whether or not to initiate ERP
* on the affected device.
*
* Return value:
* nothing
**/
static void ipr_erp_start(struct ipr_ioa_cfg *ioa_cfg,
struct ipr_cmnd *ipr_cmd)
{
struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd;
struct ipr_resource_entry *res = scsi_cmd->device->hostdata;
u32 ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc);
u32 masked_ioasc = ioasc & IPR_IOASC_IOASC_MASK;
if (!res) {
ipr_scsi_eh_done(ipr_cmd);
return;
}
if (!ipr_is_gscsi(res) && masked_ioasc != IPR_IOASC_HW_DEV_BUS_STATUS)
ipr_gen_sense(ipr_cmd);
ipr_dump_ioasa(ioa_cfg, ipr_cmd, res);
switch (masked_ioasc) {
case IPR_IOASC_ABORTED_CMD_TERM_BY_HOST:
if (ipr_is_naca_model(res))
scsi_cmd->result |= (DID_ABORT << 16);
else
scsi_cmd->result |= (DID_IMM_RETRY << 16);
break;
case IPR_IOASC_IR_RESOURCE_HANDLE:
case IPR_IOASC_IR_NO_CMDS_TO_2ND_IOA:
scsi_cmd->result |= (DID_NO_CONNECT << 16);
break;
case IPR_IOASC_HW_SEL_TIMEOUT:
scsi_cmd->result |= (DID_NO_CONNECT << 16);
if (!ipr_is_naca_model(res))
res->needs_sync_complete = 1;
break;
case IPR_IOASC_SYNC_REQUIRED:
if (!res->in_erp)
res->needs_sync_complete = 1;
scsi_cmd->result |= (DID_IMM_RETRY << 16);
break;
case IPR_IOASC_MED_DO_NOT_REALLOC: /* prevent retries */
case IPR_IOASA_IR_DUAL_IOA_DISABLED:
scsi_cmd->result |= (DID_PASSTHROUGH << 16);
break;
case IPR_IOASC_BUS_WAS_RESET:
case IPR_IOASC_BUS_WAS_RESET_BY_OTHER:
/*
* Report the bus reset and ask for a retry. The device
* will give CC/UA the next command.
*/
if (!res->resetting_device)
scsi_report_bus_reset(ioa_cfg->host, scsi_cmd->device->channel);
scsi_cmd->result |= (DID_ERROR << 16);
if (!ipr_is_naca_model(res))
res->needs_sync_complete = 1;
break;
case IPR_IOASC_HW_DEV_BUS_STATUS:
scsi_cmd->result |= IPR_IOASC_SENSE_STATUS(ioasc);
if (IPR_IOASC_SENSE_STATUS(ioasc) == SAM_STAT_CHECK_CONDITION) {
if (!ipr_get_autosense(ipr_cmd)) {
if (!ipr_is_naca_model(res)) {
ipr_erp_cancel_all(ipr_cmd);
return;
}
}
}
if (!ipr_is_naca_model(res))
res->needs_sync_complete = 1;
break;
case IPR_IOASC_NR_INIT_CMD_REQUIRED:
break;
default:
if (IPR_IOASC_SENSE_KEY(ioasc) > RECOVERED_ERROR)
scsi_cmd->result |= (DID_ERROR << 16);
if (!ipr_is_vset_device(res) && !ipr_is_naca_model(res))
res->needs_sync_complete = 1;
break;
}
scsi_dma_unmap(ipr_cmd->scsi_cmd);
list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
scsi_cmd->scsi_done(scsi_cmd);
}
/**
* ipr_scsi_done - mid-layer done function
* @ipr_cmd: ipr command struct
*
* This function is invoked by the interrupt handler for
* ops generated by the SCSI mid-layer
*
* Return value:
* none
**/
static void ipr_scsi_done(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd;
u32 ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc);
scsi_set_resid(scsi_cmd, be32_to_cpu(ipr_cmd->s.ioasa.hdr.residual_data_len));
if (likely(IPR_IOASC_SENSE_KEY(ioasc) == 0)) {
scsi_dma_unmap(ipr_cmd->scsi_cmd);
list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
scsi_cmd->scsi_done(scsi_cmd);
} else
ipr_erp_start(ioa_cfg, ipr_cmd);
}
/**
* ipr_queuecommand - Queue a mid-layer request
* @scsi_cmd: scsi command struct
* @done: done function
*
* This function queues a request generated by the mid-layer.
*
* Return value:
* 0 on success
* SCSI_MLQUEUE_DEVICE_BUSY if device is busy
* SCSI_MLQUEUE_HOST_BUSY if host is busy
**/
static int ipr_queuecommand(struct scsi_cmnd *scsi_cmd,
void (*done) (struct scsi_cmnd *))
{
struct ipr_ioa_cfg *ioa_cfg;
struct ipr_resource_entry *res;
struct ipr_ioarcb *ioarcb;
struct ipr_cmnd *ipr_cmd;
int rc = 0;
scsi_cmd->scsi_done = done;
ioa_cfg = (struct ipr_ioa_cfg *)scsi_cmd->device->host->hostdata;
res = scsi_cmd->device->hostdata;
scsi_cmd->result = (DID_OK << 16);
/*
* We are currently blocking all devices due to a host reset
* We have told the host to stop giving us new requests, but
* ERP ops don't count. FIXME
*/
if (unlikely(!ioa_cfg->allow_cmds && !ioa_cfg->ioa_is_dead))
return SCSI_MLQUEUE_HOST_BUSY;
/*
* FIXME - Create scsi_set_host_offline interface
* and the ioa_is_dead check can be removed
*/
if (unlikely(ioa_cfg->ioa_is_dead || !res)) {
memset(scsi_cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
scsi_cmd->result = (DID_NO_CONNECT << 16);
scsi_cmd->scsi_done(scsi_cmd);
return 0;
}
if (ipr_is_gata(res) && res->sata_port)
return ata_sas_queuecmd(scsi_cmd, done, res->sata_port->ap);
ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg);
ioarcb = &ipr_cmd->ioarcb;
list_add_tail(&ipr_cmd->queue, &ioa_cfg->pending_q);
memcpy(ioarcb->cmd_pkt.cdb, scsi_cmd->cmnd, scsi_cmd->cmd_len);
ipr_cmd->scsi_cmd = scsi_cmd;
ioarcb->res_handle = res->res_handle;
ipr_cmd->done = ipr_scsi_done;
ipr_trc_hook(ipr_cmd, IPR_TRACE_START, IPR_GET_RES_PHYS_LOC(res));
if (ipr_is_gscsi(res) || ipr_is_vset_device(res)) {
if (scsi_cmd->underflow == 0)
ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_NO_ULEN_CHK;
if (res->needs_sync_complete) {
ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_SYNC_COMPLETE;
res->needs_sync_complete = 0;
}
ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_NO_LINK_DESC;
ioarcb->cmd_pkt.flags_lo |= IPR_FLAGS_LO_DELAY_AFTER_RST;
ioarcb->cmd_pkt.flags_lo |= IPR_FLAGS_LO_ALIGNED_BFR;
ioarcb->cmd_pkt.flags_lo |= ipr_get_task_attributes(scsi_cmd);
}
if (scsi_cmd->cmnd[0] >= 0xC0 &&
(!ipr_is_gscsi(res) || scsi_cmd->cmnd[0] == IPR_QUERY_RSRC_STATE))
ioarcb->cmd_pkt.request_type = IPR_RQTYPE_IOACMD;
if (likely(rc == 0)) {
if (ioa_cfg->sis64)
rc = ipr_build_ioadl64(ioa_cfg, ipr_cmd);
else
rc = ipr_build_ioadl(ioa_cfg, ipr_cmd);
}
if (likely(rc == 0)) {
mb();
ipr_send_command(ipr_cmd);
} else {
list_move_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
return SCSI_MLQUEUE_HOST_BUSY;
}
return 0;
}
/**
* ipr_ioctl - IOCTL handler
* @sdev: scsi device struct
* @cmd: IOCTL cmd
* @arg: IOCTL arg
*
* Return value:
* 0 on success / other on failure
**/
static int ipr_ioctl(struct scsi_device *sdev, int cmd, void __user *arg)
{
struct ipr_resource_entry *res;
res = (struct ipr_resource_entry *)sdev->hostdata;
if (res && ipr_is_gata(res)) {
if (cmd == HDIO_GET_IDENTITY)
return -ENOTTY;
return ata_sas_scsi_ioctl(res->sata_port->ap, sdev, cmd, arg);
}
return -EINVAL;
}
/**
* ipr_info - Get information about the card/driver
* @scsi_host: scsi host struct
*
* Return value:
* pointer to buffer with description string
**/
static const char * ipr_ioa_info(struct Scsi_Host *host)
{
static char buffer[512];
struct ipr_ioa_cfg *ioa_cfg;
unsigned long lock_flags = 0;
ioa_cfg = (struct ipr_ioa_cfg *) host->hostdata;
spin_lock_irqsave(host->host_lock, lock_flags);
sprintf(buffer, "IBM %X Storage Adapter", ioa_cfg->type);
spin_unlock_irqrestore(host->host_lock, lock_flags);
return buffer;
}
static struct scsi_host_template driver_template = {
.module = THIS_MODULE,
.name = "IPR",
.info = ipr_ioa_info,
.ioctl = ipr_ioctl,
.queuecommand = ipr_queuecommand,
.eh_abort_handler = ipr_eh_abort,
.eh_device_reset_handler = ipr_eh_dev_reset,
.eh_host_reset_handler = ipr_eh_host_reset,
.slave_alloc = ipr_slave_alloc,
.slave_configure = ipr_slave_configure,
.slave_destroy = ipr_slave_destroy,
.target_alloc = ipr_target_alloc,
.target_destroy = ipr_target_destroy,
.change_queue_depth = ipr_change_queue_depth,
.change_queue_type = ipr_change_queue_type,
.bios_param = ipr_biosparam,
.can_queue = IPR_MAX_COMMANDS,
.this_id = -1,
.sg_tablesize = IPR_MAX_SGLIST,
.max_sectors = IPR_IOA_MAX_SECTORS,
.cmd_per_lun = IPR_MAX_CMD_PER_LUN,
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = ipr_ioa_attrs,
.sdev_attrs = ipr_dev_attrs,
.proc_name = IPR_NAME
};
/**
* ipr_ata_phy_reset - libata phy_reset handler
* @ap: ata port to reset
*
**/
static void ipr_ata_phy_reset(struct ata_port *ap)
{
unsigned long flags;
struct ipr_sata_port *sata_port = ap->private_data;
struct ipr_resource_entry *res = sata_port->res;
struct ipr_ioa_cfg *ioa_cfg = sata_port->ioa_cfg;
int rc;
ENTER;
spin_lock_irqsave(ioa_cfg->host->host_lock, flags);
while(ioa_cfg->in_reset_reload) {
spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags);
wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
spin_lock_irqsave(ioa_cfg->host->host_lock, flags);
}
if (!ioa_cfg->allow_cmds)
goto out_unlock;
rc = ipr_device_reset(ioa_cfg, res);
if (rc) {
ap->link.device[0].class = ATA_DEV_NONE;
goto out_unlock;
}
ap->link.device[0].class = res->ata_class;
if (ap->link.device[0].class == ATA_DEV_UNKNOWN)
ap->link.device[0].class = ATA_DEV_NONE;
out_unlock:
spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags);
LEAVE;
}
/**
* ipr_ata_post_internal - Cleanup after an internal command
* @qc: ATA queued command
*
* Return value:
* none
**/
static void ipr_ata_post_internal(struct ata_queued_cmd *qc)
{
struct ipr_sata_port *sata_port = qc->ap->private_data;
struct ipr_ioa_cfg *ioa_cfg = sata_port->ioa_cfg;
struct ipr_cmnd *ipr_cmd;
unsigned long flags;
spin_lock_irqsave(ioa_cfg->host->host_lock, flags);
while(ioa_cfg->in_reset_reload) {
spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags);
wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
spin_lock_irqsave(ioa_cfg->host->host_lock, flags);
}
list_for_each_entry(ipr_cmd, &ioa_cfg->pending_q, queue) {
if (ipr_cmd->qc == qc) {
ipr_device_reset(ioa_cfg, sata_port->res);
break;
}
}
spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags);
}
/**
* ipr_copy_sata_tf - Copy a SATA taskfile to an IOA data structure
* @regs: destination
* @tf: source ATA taskfile
*
* Return value:
* none
**/
static void ipr_copy_sata_tf(struct ipr_ioarcb_ata_regs *regs,
struct ata_taskfile *tf)
{
regs->feature = tf->feature;
regs->nsect = tf->nsect;
regs->lbal = tf->lbal;
regs->lbam = tf->lbam;
regs->lbah = tf->lbah;
regs->device = tf->device;
regs->command = tf->command;
regs->hob_feature = tf->hob_feature;
regs->hob_nsect = tf->hob_nsect;
regs->hob_lbal = tf->hob_lbal;
regs->hob_lbam = tf->hob_lbam;
regs->hob_lbah = tf->hob_lbah;
regs->ctl = tf->ctl;
}
/**
* ipr_sata_done - done function for SATA commands
* @ipr_cmd: ipr command struct
*
* This function is invoked by the interrupt handler for
* ops generated by the SCSI mid-layer to SATA devices
*
* Return value:
* none
**/
static void ipr_sata_done(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
struct ata_queued_cmd *qc = ipr_cmd->qc;
struct ipr_sata_port *sata_port = qc->ap->private_data;
struct ipr_resource_entry *res = sata_port->res;
u32 ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc);
if (ipr_cmd->ioa_cfg->sis64)
memcpy(&sata_port->ioasa, &ipr_cmd->s.ioasa64.u.gata,
sizeof(struct ipr_ioasa_gata));
else
memcpy(&sata_port->ioasa, &ipr_cmd->s.ioasa.u.gata,
sizeof(struct ipr_ioasa_gata));
ipr_dump_ioasa(ioa_cfg, ipr_cmd, res);
if (be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc_specific) & IPR_ATA_DEVICE_WAS_RESET)
scsi_report_device_reset(ioa_cfg->host, res->bus, res->target);
if (IPR_IOASC_SENSE_KEY(ioasc) > RECOVERED_ERROR)
qc->err_mask |= __ac_err_mask(sata_port->ioasa.status);
else
qc->err_mask |= ac_err_mask(sata_port->ioasa.status);
list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
ata_qc_complete(qc);
}
/**
* ipr_build_ata_ioadl64 - Build an ATA scatter/gather list
* @ipr_cmd: ipr command struct
* @qc: ATA queued command
*
**/
static void ipr_build_ata_ioadl64(struct ipr_cmnd *ipr_cmd,
struct ata_queued_cmd *qc)
{
u32 ioadl_flags = 0;
struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
struct ipr_ioadl64_desc *ioadl64 = ipr_cmd->i.ioadl64;
struct ipr_ioadl64_desc *last_ioadl64 = NULL;
int len = qc->nbytes;
struct scatterlist *sg;
unsigned int si;
dma_addr_t dma_addr = ipr_cmd->dma_addr;
if (len == 0)
return;
if (qc->dma_dir == DMA_TO_DEVICE) {
ioadl_flags = IPR_IOADL_FLAGS_WRITE;
ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ;
} else if (qc->dma_dir == DMA_FROM_DEVICE)
ioadl_flags = IPR_IOADL_FLAGS_READ;
ioarcb->data_transfer_length = cpu_to_be32(len);
ioarcb->ioadl_len =
cpu_to_be32(sizeof(struct ipr_ioadl64_desc) * ipr_cmd->dma_use_sg);
ioarcb->u.sis64_addr_data.data_ioadl_addr =
cpu_to_be64(dma_addr + offsetof(struct ipr_cmnd, i.ata_ioadl));
for_each_sg(qc->sg, sg, qc->n_elem, si) {
ioadl64->flags = cpu_to_be32(ioadl_flags);
ioadl64->data_len = cpu_to_be32(sg_dma_len(sg));
ioadl64->address = cpu_to_be64(sg_dma_address(sg));
last_ioadl64 = ioadl64;
ioadl64++;
}
if (likely(last_ioadl64))
last_ioadl64->flags |= cpu_to_be32(IPR_IOADL_FLAGS_LAST);
}
/**
* ipr_build_ata_ioadl - Build an ATA scatter/gather list
* @ipr_cmd: ipr command struct
* @qc: ATA queued command
*
**/
static void ipr_build_ata_ioadl(struct ipr_cmnd *ipr_cmd,
struct ata_queued_cmd *qc)
{
u32 ioadl_flags = 0;
struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
struct ipr_ioadl_desc *ioadl = ipr_cmd->i.ioadl;
struct ipr_ioadl_desc *last_ioadl = NULL;
libata: eliminate the home grown dma padding in favour of that provided by the block layer ATA requires that all DMA transfers begin and end on word boundaries. Because of this, a large amount of machinery grew up in ide to adjust scatterlists on this basis. However, as of 2.5, the block layer has a dma_alignment variable which ensures both the beginning and length of a DMA transfer are aligned on the dma_alignment boundary. Although the block layer does adjust the beginning of the transfer to ensure this happens, it doesn't actually adjust the length, it merely makes sure that space is allocated for transfers beyond the declared length. The upshot of this is that scatterlists may be padded to any size between the actual length and the length adjusted to the dma_alignment safely knowing that memory is allocated in this region. Right at the moment, SCSI takes the default dma_aligment which is on a 512 byte boundary. Note that this aligment only applies to transfers coming in from user space. However, since all kernel allocations are automatically aligned on a minimum of 32 byte boundaries, it is safe to adjust them in this manner as well. tj: * Adjusting sg after padding is done in block layer. Make libata set queue alignment correctly for ATAPI devices and drop broken sg mangling from ata_sg_setup(). * Use request->raw_data_len for ATAPI transfer chunk size. * Killed qc->raw_nbytes. * Separated out killing qc->n_iter. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-02-19 11:36:56 +01:00
int len = qc->nbytes;
struct scatterlist *sg;
unsigned int si;
if (len == 0)
return;
if (qc->dma_dir == DMA_TO_DEVICE) {
ioadl_flags = IPR_IOADL_FLAGS_WRITE;
ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ;
ioarcb->data_transfer_length = cpu_to_be32(len);
ioarcb->ioadl_len =
cpu_to_be32(sizeof(struct ipr_ioadl_desc) * ipr_cmd->dma_use_sg);
} else if (qc->dma_dir == DMA_FROM_DEVICE) {
ioadl_flags = IPR_IOADL_FLAGS_READ;
ioarcb->read_data_transfer_length = cpu_to_be32(len);
ioarcb->read_ioadl_len =
cpu_to_be32(sizeof(struct ipr_ioadl_desc) * ipr_cmd->dma_use_sg);
}
for_each_sg(qc->sg, sg, qc->n_elem, si) {
ioadl->flags_and_data_len = cpu_to_be32(ioadl_flags | sg_dma_len(sg));
ioadl->address = cpu_to_be32(sg_dma_address(sg));
last_ioadl = ioadl;
ioadl++;
}
if (likely(last_ioadl))
last_ioadl->flags_and_data_len |= cpu_to_be32(IPR_IOADL_FLAGS_LAST);
}
/**
* ipr_qc_issue - Issue a SATA qc to a device
* @qc: queued command
*
* Return value:
* 0 if success
**/
static unsigned int ipr_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ipr_sata_port *sata_port = ap->private_data;
struct ipr_resource_entry *res = sata_port->res;
struct ipr_ioa_cfg *ioa_cfg = sata_port->ioa_cfg;
struct ipr_cmnd *ipr_cmd;
struct ipr_ioarcb *ioarcb;
struct ipr_ioarcb_ata_regs *regs;
if (unlikely(!ioa_cfg->allow_cmds || ioa_cfg->ioa_is_dead))
return AC_ERR_SYSTEM;
ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg);
ioarcb = &ipr_cmd->ioarcb;
if (ioa_cfg->sis64) {
regs = &ipr_cmd->i.ata_ioadl.regs;
ioarcb->add_cmd_parms_offset = cpu_to_be16(sizeof(*ioarcb));
} else
regs = &ioarcb->u.add_data.u.regs;
memset(regs, 0, sizeof(*regs));
ioarcb->add_cmd_parms_len = cpu_to_be16(sizeof(*regs));
list_add_tail(&ipr_cmd->queue, &ioa_cfg->pending_q);
ipr_cmd->qc = qc;
ipr_cmd->done = ipr_sata_done;
ipr_cmd->ioarcb.res_handle = res->res_handle;
ioarcb->cmd_pkt.request_type = IPR_RQTYPE_ATA_PASSTHRU;
ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_NO_LINK_DESC;
ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_NO_ULEN_CHK;
libata: eliminate the home grown dma padding in favour of that provided by the block layer ATA requires that all DMA transfers begin and end on word boundaries. Because of this, a large amount of machinery grew up in ide to adjust scatterlists on this basis. However, as of 2.5, the block layer has a dma_alignment variable which ensures both the beginning and length of a DMA transfer are aligned on the dma_alignment boundary. Although the block layer does adjust the beginning of the transfer to ensure this happens, it doesn't actually adjust the length, it merely makes sure that space is allocated for transfers beyond the declared length. The upshot of this is that scatterlists may be padded to any size between the actual length and the length adjusted to the dma_alignment safely knowing that memory is allocated in this region. Right at the moment, SCSI takes the default dma_aligment which is on a 512 byte boundary. Note that this aligment only applies to transfers coming in from user space. However, since all kernel allocations are automatically aligned on a minimum of 32 byte boundaries, it is safe to adjust them in this manner as well. tj: * Adjusting sg after padding is done in block layer. Make libata set queue alignment correctly for ATAPI devices and drop broken sg mangling from ata_sg_setup(). * Use request->raw_data_len for ATAPI transfer chunk size. * Killed qc->raw_nbytes. * Separated out killing qc->n_iter. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-02-19 11:36:56 +01:00
ipr_cmd->dma_use_sg = qc->n_elem;
if (ioa_cfg->sis64)
ipr_build_ata_ioadl64(ipr_cmd, qc);
else
ipr_build_ata_ioadl(ipr_cmd, qc);
regs->flags |= IPR_ATA_FLAG_STATUS_ON_GOOD_COMPLETION;
ipr_copy_sata_tf(regs, &qc->tf);
memcpy(ioarcb->cmd_pkt.cdb, qc->cdb, IPR_MAX_CDB_LEN);
ipr_trc_hook(ipr_cmd, IPR_TRACE_START, IPR_GET_RES_PHYS_LOC(res));
switch (qc->tf.protocol) {
case ATA_PROT_NODATA:
case ATA_PROT_PIO:
break;
case ATA_PROT_DMA:
regs->flags |= IPR_ATA_FLAG_XFER_TYPE_DMA;
break;
case ATAPI_PROT_PIO:
case ATAPI_PROT_NODATA:
regs->flags |= IPR_ATA_FLAG_PACKET_CMD;
break;
case ATAPI_PROT_DMA:
regs->flags |= IPR_ATA_FLAG_PACKET_CMD;
regs->flags |= IPR_ATA_FLAG_XFER_TYPE_DMA;
break;
default:
WARN_ON(1);
return AC_ERR_INVALID;
}
mb();
ipr_send_command(ipr_cmd);
return 0;
}
/**
* ipr_qc_fill_rtf - Read result TF
* @qc: ATA queued command
*
* Return value:
* true
**/
static bool ipr_qc_fill_rtf(struct ata_queued_cmd *qc)
{
struct ipr_sata_port *sata_port = qc->ap->private_data;
struct ipr_ioasa_gata *g = &sata_port->ioasa;
struct ata_taskfile *tf = &qc->result_tf;
tf->feature = g->error;
tf->nsect = g->nsect;
tf->lbal = g->lbal;
tf->lbam = g->lbam;
tf->lbah = g->lbah;
tf->device = g->device;
tf->command = g->status;
tf->hob_nsect = g->hob_nsect;
tf->hob_lbal = g->hob_lbal;
tf->hob_lbam = g->hob_lbam;
tf->hob_lbah = g->hob_lbah;
tf->ctl = g->alt_status;
return true;
}
static struct ata_port_operations ipr_sata_ops = {
.phy_reset = ipr_ata_phy_reset,
libata: make reset related methods proper port operations Currently reset methods are not specified directly in the ata_port_operations table. If a LLD wants to use custom reset methods, it should construct and use a error_handler which uses those reset methods. It's done this way for two reasons. First, the ops table already contained too many methods and adding four more of them would noticeably increase the amount of necessary boilerplate code all over low level drivers. Second, as ->error_handler uses those reset methods, it can get confusing. ie. By overriding ->error_handler, those reset ops can be made useless making layering a bit hazy. Now that ops table uses inheritance, the first problem doesn't exist anymore. The second isn't completely solved but is relieved by providing default values - most drivers can just override what it has implemented and don't have to concern itself about higher level callbacks. In fact, there currently is no driver which actually modifies error handling behavior. Drivers which override ->error_handler just wraps the standard error handler only to prepare the controller for EH. I don't think making ops layering strict has any noticeable benefit. This patch makes ->prereset, ->softreset, ->hardreset, ->postreset and their PMP counterparts propoer ops. Default ops are provided in the base ops tables and drivers are converted to override individual reset methods instead of creating custom error_handler. * ata_std_error_handler() doesn't use sata_std_hardreset() if SCRs aren't accessible. sata_promise doesn't need to use separate error_handlers for PATA and SATA anymore. * softreset is broken for sata_inic162x and sata_sx4. As libata now always prefers hardreset, this doesn't really matter but the ops are forced to NULL using ATA_OP_NULL for documentation purpose. * pata_hpt374 needs to use different prereset for the first and second PCI functions. This used to be done by branching from hpt374_error_handler(). The proper way to do this is to use separate ops and port_info tables for each function. Converted. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-03-25 04:22:50 +01:00
.hardreset = ipr_sata_reset,
.post_internal_cmd = ipr_ata_post_internal,
.qc_prep = ata_noop_qc_prep,
.qc_issue = ipr_qc_issue,
.qc_fill_rtf = ipr_qc_fill_rtf,
.port_start = ata_sas_port_start,
.port_stop = ata_sas_port_stop
};
static struct ata_port_info sata_port_info = {
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_SATA_RESET |
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA,
.pio_mask = 0x10, /* pio4 */
.mwdma_mask = 0x07,
.udma_mask = 0x7f, /* udma0-6 */
.port_ops = &ipr_sata_ops
};
#ifdef CONFIG_PPC_PSERIES
static const u16 ipr_blocked_processors[] = {
PV_NORTHSTAR,
PV_PULSAR,
PV_POWER4,
PV_ICESTAR,
PV_SSTAR,
PV_POWER4p,
PV_630,
PV_630p
};
/**
* ipr_invalid_adapter - Determine if this adapter is supported on this hardware
* @ioa_cfg: ioa cfg struct
*
* Adapters that use Gemstone revision < 3.1 do not work reliably on
* certain pSeries hardware. This function determines if the given
* adapter is in one of these confgurations or not.
*
* Return value:
* 1 if adapter is not supported / 0 if adapter is supported
**/
static int ipr_invalid_adapter(struct ipr_ioa_cfg *ioa_cfg)
{
int i;
if ((ioa_cfg->type == 0x5702) && (ioa_cfg->pdev->revision < 4)) {
for (i = 0; i < ARRAY_SIZE(ipr_blocked_processors); i++){
if (__is_processor(ipr_blocked_processors[i]))
return 1;
}
}
return 0;
}
#else
#define ipr_invalid_adapter(ioa_cfg) 0
#endif
/**
* ipr_ioa_bringdown_done - IOA bring down completion.
* @ipr_cmd: ipr command struct
*
* This function processes the completion of an adapter bring down.
* It wakes any reset sleepers.
*
* Return value:
* IPR_RC_JOB_RETURN
**/
static int ipr_ioa_bringdown_done(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
ENTER;
ioa_cfg->in_reset_reload = 0;
ioa_cfg->reset_retries = 0;
list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
wake_up_all(&ioa_cfg->reset_wait_q);
spin_unlock_irq(ioa_cfg->host->host_lock);
scsi_unblock_requests(ioa_cfg->host);
spin_lock_irq(ioa_cfg->host->host_lock);
LEAVE;
return IPR_RC_JOB_RETURN;
}
/**
* ipr_ioa_reset_done - IOA reset completion.
* @ipr_cmd: ipr command struct
*
* This function processes the completion of an adapter reset.
* It schedules any necessary mid-layer add/removes and
* wakes any reset sleepers.
*
* Return value:
* IPR_RC_JOB_RETURN
**/
static int ipr_ioa_reset_done(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
struct ipr_resource_entry *res;
struct ipr_hostrcb *hostrcb, *temp;
int i = 0;
ENTER;
ioa_cfg->in_reset_reload = 0;
ioa_cfg->allow_cmds = 1;
ioa_cfg->reset_cmd = NULL;
ioa_cfg->doorbell |= IPR_RUNTIME_RESET;
list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
if (ioa_cfg->allow_ml_add_del && (res->add_to_ml || res->del_from_ml)) {
ipr_trace;
break;
}
}
schedule_work(&ioa_cfg->work_q);
list_for_each_entry_safe(hostrcb, temp, &ioa_cfg->hostrcb_free_q, queue) {
list_del(&hostrcb->queue);
if (i++ < IPR_NUM_LOG_HCAMS)
ipr_send_hcam(ioa_cfg, IPR_HCAM_CDB_OP_CODE_LOG_DATA, hostrcb);
else
ipr_send_hcam(ioa_cfg, IPR_HCAM_CDB_OP_CODE_CONFIG_CHANGE, hostrcb);
}
scsi_report_bus_reset(ioa_cfg->host, IPR_VSET_BUS);
dev_info(&ioa_cfg->pdev->dev, "IOA initialized.\n");
ioa_cfg->reset_retries = 0;
list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
wake_up_all(&ioa_cfg->reset_wait_q);
[SCSI] ipr: fix lockdep warning from ipr_ioa_reset_done To fix the following lockdep warning we turn the spin_unlock_irq() into a spin_unlock() and similarly for the corresponding spin_lock_irq(). We can do this because there is no need to enable interrupts in this path (thanks to Bring King for the tip). Badness at kernel/lockdep.c:2193 NIP: c0000000000855d0 LR: c0000000000855b4 CTR: c0000000000482d0 REGS: c00000000fffb8d0 TRAP: 0700 Not tainted (2.6.28-rc5-autokern1) MSR: 8000000000021032 <ME,IR,DR> CR: 28000022 XER: 00000004 TASK = c00000000091fa80[0] 'swapper' THREAD: c000000000a3c000 CPU: 0 GPR00: 0000000000000000 c00000000fffbb50 c000000000a3c2e0 0000000000000001 GPR04: 000000000000a580 c0000000003870d4 0000000000000000 0000000000000001 GPR08: 0000000000000000 c00000000112fdf0 c0000000008ed918 c000000000abcfd0 GPR12: 0000000048000088 c000000000a7f300 0000000000000000 0000000002100000 GPR16: c000000000644bd0 c000000000643390 0000000000000000 00000000003d0c00 GPR20: 00000000028372d8 c0000000007372d8 0000000002837548 c000000000737548 GPR24: c000000000644660 00000000028372d8 000000000000001a c000000076760000 GPR28: 0000000000000004 c0000000004e8450 c0000000009aafb0 c00000000091fa80 NIP [c0000000000855d0] .trace_hardirqs_on_caller+0x10c/0x194 LR [c0000000000855b4] .trace_hardirqs_on_caller+0xf0/0x194 Call Trace: [c00000000fffbb50] [c00000000fffbbe0] 0xc00000000fffbbe0 (unreliable) [c00000000fffbbe0] [c0000000004e8450] ._spin_unlock_irq+0x38/0x5c [c00000000fffbc70] [c0000000003870d4] .ipr_ioa_reset_done+0x204/0x284 [c00000000fffbd10] [c00000000037d234] .ipr_reset_ioa_job+0xc4/0xec [c00000000fffbda0] [c000000000385ce0] .ipr_isr+0x208/0x484 [c00000000fffbe50] [c0000000000aaf3c] .handle_IRQ_event+0x58/0xd4 [c00000000fffbef0] [c0000000000ad978] .handle_fasteoi_irq+0x110/0x1ac [c00000000fffbf90] [c000000000025214] .call_handle_irq+0x1c/0x2c [c000000000a3f9a0] [c00000000000d168] .do_IRQ+0x120/0x210 [c000000000a3fa40] [c000000000004804] hardware_interrupt_entry+0x1c/0x98 --- Exception: 501 at .pseries_dedicated_idle_sleep+0xec/0x1cc LR = .pseries_dedicated_idle_sleep+0xdc/0x1cc [c000000000a3fd30] [c000000000038208] .pseries_dedicated_idle_sleep+0x74/0x1cc (unreliable) [c000000000a3fdd0] [c000000000012134] .cpu_idle+0x114/0x1dc [c000000000a3fe60] [c0000000004ecb18] .rest_init+0x7c/0x94 [c000000000a3fee0] [c000000000700a40] .start_kernel+0x4b8/0x4e0 [c000000000a3ff90] [c000000000008368] .start_here_common+0x1c/0x34 Instruction dump: e92d01b0 80090894 2f800000 41be002c 481ed1d1 60000000 2fa30000 419e0080 e93e8090 80090000 2f800000 409e0070 <0fe00000> 48000068 7fe3fb78 38800001 Signed-off-by: Mark Nelson <markn@au1.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-10 02:23:20 +01:00
spin_unlock(ioa_cfg->host->host_lock);
scsi_unblock_requests(ioa_cfg->host);
[SCSI] ipr: fix lockdep warning from ipr_ioa_reset_done To fix the following lockdep warning we turn the spin_unlock_irq() into a spin_unlock() and similarly for the corresponding spin_lock_irq(). We can do this because there is no need to enable interrupts in this path (thanks to Bring King for the tip). Badness at kernel/lockdep.c:2193 NIP: c0000000000855d0 LR: c0000000000855b4 CTR: c0000000000482d0 REGS: c00000000fffb8d0 TRAP: 0700 Not tainted (2.6.28-rc5-autokern1) MSR: 8000000000021032 <ME,IR,DR> CR: 28000022 XER: 00000004 TASK = c00000000091fa80[0] 'swapper' THREAD: c000000000a3c000 CPU: 0 GPR00: 0000000000000000 c00000000fffbb50 c000000000a3c2e0 0000000000000001 GPR04: 000000000000a580 c0000000003870d4 0000000000000000 0000000000000001 GPR08: 0000000000000000 c00000000112fdf0 c0000000008ed918 c000000000abcfd0 GPR12: 0000000048000088 c000000000a7f300 0000000000000000 0000000002100000 GPR16: c000000000644bd0 c000000000643390 0000000000000000 00000000003d0c00 GPR20: 00000000028372d8 c0000000007372d8 0000000002837548 c000000000737548 GPR24: c000000000644660 00000000028372d8 000000000000001a c000000076760000 GPR28: 0000000000000004 c0000000004e8450 c0000000009aafb0 c00000000091fa80 NIP [c0000000000855d0] .trace_hardirqs_on_caller+0x10c/0x194 LR [c0000000000855b4] .trace_hardirqs_on_caller+0xf0/0x194 Call Trace: [c00000000fffbb50] [c00000000fffbbe0] 0xc00000000fffbbe0 (unreliable) [c00000000fffbbe0] [c0000000004e8450] ._spin_unlock_irq+0x38/0x5c [c00000000fffbc70] [c0000000003870d4] .ipr_ioa_reset_done+0x204/0x284 [c00000000fffbd10] [c00000000037d234] .ipr_reset_ioa_job+0xc4/0xec [c00000000fffbda0] [c000000000385ce0] .ipr_isr+0x208/0x484 [c00000000fffbe50] [c0000000000aaf3c] .handle_IRQ_event+0x58/0xd4 [c00000000fffbef0] [c0000000000ad978] .handle_fasteoi_irq+0x110/0x1ac [c00000000fffbf90] [c000000000025214] .call_handle_irq+0x1c/0x2c [c000000000a3f9a0] [c00000000000d168] .do_IRQ+0x120/0x210 [c000000000a3fa40] [c000000000004804] hardware_interrupt_entry+0x1c/0x98 --- Exception: 501 at .pseries_dedicated_idle_sleep+0xec/0x1cc LR = .pseries_dedicated_idle_sleep+0xdc/0x1cc [c000000000a3fd30] [c000000000038208] .pseries_dedicated_idle_sleep+0x74/0x1cc (unreliable) [c000000000a3fdd0] [c000000000012134] .cpu_idle+0x114/0x1dc [c000000000a3fe60] [c0000000004ecb18] .rest_init+0x7c/0x94 [c000000000a3fee0] [c000000000700a40] .start_kernel+0x4b8/0x4e0 [c000000000a3ff90] [c000000000008368] .start_here_common+0x1c/0x34 Instruction dump: e92d01b0 80090894 2f800000 41be002c 481ed1d1 60000000 2fa30000 419e0080 e93e8090 80090000 2f800000 409e0070 <0fe00000> 48000068 7fe3fb78 38800001 Signed-off-by: Mark Nelson <markn@au1.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-10 02:23:20 +01:00
spin_lock(ioa_cfg->host->host_lock);
if (!ioa_cfg->allow_cmds)
scsi_block_requests(ioa_cfg->host);
LEAVE;
return IPR_RC_JOB_RETURN;
}
/**
* ipr_set_sup_dev_dflt - Initialize a Set Supported Device buffer
* @supported_dev: supported device struct
* @vpids: vendor product id struct
*
* Return value:
* none
**/
static void ipr_set_sup_dev_dflt(struct ipr_supported_device *supported_dev,
struct ipr_std_inq_vpids *vpids)
{
memset(supported_dev, 0, sizeof(struct ipr_supported_device));
memcpy(&supported_dev->vpids, vpids, sizeof(struct ipr_std_inq_vpids));
supported_dev->num_records = 1;
supported_dev->data_length =
cpu_to_be16(sizeof(struct ipr_supported_device));
supported_dev->reserved = 0;
}
/**
* ipr_set_supported_devs - Send Set Supported Devices for a device
* @ipr_cmd: ipr command struct
*
* This function sends a Set Supported Devices to the adapter
*
* Return value:
* IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
**/
static int ipr_set_supported_devs(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
struct ipr_supported_device *supp_dev = &ioa_cfg->vpd_cbs->supp_dev;
struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
struct ipr_resource_entry *res = ipr_cmd->u.res;
ipr_cmd->job_step = ipr_ioa_reset_done;
list_for_each_entry_continue(res, &ioa_cfg->used_res_q, queue) {
if (!ipr_is_scsi_disk(res))
continue;
ipr_cmd->u.res = res;
ipr_set_sup_dev_dflt(supp_dev, &res->std_inq_data.vpids);
ioarcb->res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE);
ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ;
ioarcb->cmd_pkt.request_type = IPR_RQTYPE_IOACMD;
ioarcb->cmd_pkt.cdb[0] = IPR_SET_SUPPORTED_DEVICES;
ioarcb->cmd_pkt.cdb[1] = IPR_SET_ALL_SUPPORTED_DEVICES;
ioarcb->cmd_pkt.cdb[7] = (sizeof(struct ipr_supported_device) >> 8) & 0xff;
ioarcb->cmd_pkt.cdb[8] = sizeof(struct ipr_supported_device) & 0xff;
ipr_init_ioadl(ipr_cmd,
ioa_cfg->vpd_cbs_dma +
offsetof(struct ipr_misc_cbs, supp_dev),
sizeof(struct ipr_supported_device),
IPR_IOADL_FLAGS_WRITE_LAST);
ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout,
IPR_SET_SUP_DEVICE_TIMEOUT);
if (!ioa_cfg->sis64)
ipr_cmd->job_step = ipr_set_supported_devs;
return IPR_RC_JOB_RETURN;
}
return IPR_RC_JOB_CONTINUE;
}
/**
* ipr_get_mode_page - Locate specified mode page
* @mode_pages: mode page buffer
* @page_code: page code to find
* @len: minimum required length for mode page
*
* Return value:
* pointer to mode page / NULL on failure
**/
static void *ipr_get_mode_page(struct ipr_mode_pages *mode_pages,
u32 page_code, u32 len)
{
struct ipr_mode_page_hdr *mode_hdr;
u32 page_length;
u32 length;
if (!mode_pages || (mode_pages->hdr.length == 0))
return NULL;
length = (mode_pages->hdr.length + 1) - 4 - mode_pages->hdr.block_desc_len;
mode_hdr = (struct ipr_mode_page_hdr *)
(mode_pages->data + mode_pages->hdr.block_desc_len);
while (length) {
if (IPR_GET_MODE_PAGE_CODE(mode_hdr) == page_code) {
if (mode_hdr->page_length >= (len - sizeof(struct ipr_mode_page_hdr)))
return mode_hdr;
break;
} else {
page_length = (sizeof(struct ipr_mode_page_hdr) +
mode_hdr->page_length);
length -= page_length;
mode_hdr = (struct ipr_mode_page_hdr *)
((unsigned long)mode_hdr + page_length);
}
}
return NULL;
}
/**
* ipr_check_term_power - Check for term power errors
* @ioa_cfg: ioa config struct
* @mode_pages: IOAFP mode pages buffer
*
* Check the IOAFP's mode page 28 for term power errors
*
* Return value:
* nothing
**/
static void ipr_check_term_power(struct ipr_ioa_cfg *ioa_cfg,
struct ipr_mode_pages *mode_pages)
{
int i;
int entry_length;
struct ipr_dev_bus_entry *bus;
struct ipr_mode_page28 *mode_page;
mode_page = ipr_get_mode_page(mode_pages, 0x28,
sizeof(struct ipr_mode_page28));
entry_length = mode_page->entry_length;
bus = mode_page->bus;
for (i = 0; i < mode_page->num_entries; i++) {
if (bus->flags & IPR_SCSI_ATTR_NO_TERM_PWR) {
dev_err(&ioa_cfg->pdev->dev,
"Term power is absent on scsi bus %d\n",
bus->res_addr.bus);
}
bus = (struct ipr_dev_bus_entry *)((char *)bus + entry_length);
}
}
/**
* ipr_scsi_bus_speed_limit - Limit the SCSI speed based on SES table
* @ioa_cfg: ioa config struct
*
* Looks through the config table checking for SES devices. If
* the SES device is in the SES table indicating a maximum SCSI
* bus speed, the speed is limited for the bus.
*
* Return value:
* none
**/
static void ipr_scsi_bus_speed_limit(struct ipr_ioa_cfg *ioa_cfg)
{
u32 max_xfer_rate;
int i;
for (i = 0; i < IPR_MAX_NUM_BUSES; i++) {
max_xfer_rate = ipr_get_max_scsi_speed(ioa_cfg, i,
ioa_cfg->bus_attr[i].bus_width);
if (max_xfer_rate < ioa_cfg->bus_attr[i].max_xfer_rate)
ioa_cfg->bus_attr[i].max_xfer_rate = max_xfer_rate;
}
}
/**
* ipr_modify_ioafp_mode_page_28 - Modify IOAFP Mode Page 28
* @ioa_cfg: ioa config struct
* @mode_pages: mode page 28 buffer
*
* Updates mode page 28 based on driver configuration
*
* Return value:
* none
**/
static void ipr_modify_ioafp_mode_page_28(struct ipr_ioa_cfg *ioa_cfg,
struct ipr_mode_pages *mode_pages)
{
int i, entry_length;
struct ipr_dev_bus_entry *bus;
struct ipr_bus_attributes *bus_attr;
struct ipr_mode_page28 *mode_page;
mode_page = ipr_get_mode_page(mode_pages, 0x28,
sizeof(struct ipr_mode_page28));
entry_length = mode_page->entry_length;
/* Loop for each device bus entry */
for (i = 0, bus = mode_page->bus;
i < mode_page->num_entries;
i++, bus = (struct ipr_dev_bus_entry *)((u8 *)bus + entry_length)) {
if (bus->res_addr.bus > IPR_MAX_NUM_BUSES) {
dev_err(&ioa_cfg->pdev->dev,
"Invalid resource address reported: 0x%08X\n",
IPR_GET_PHYS_LOC(bus->res_addr));
continue;
}
bus_attr = &ioa_cfg->bus_attr[i];
bus->extended_reset_delay = IPR_EXTENDED_RESET_DELAY;
bus->bus_width = bus_attr->bus_width;
bus->max_xfer_rate = cpu_to_be32(bus_attr->max_xfer_rate);
bus->flags &= ~IPR_SCSI_ATTR_QAS_MASK;
if (bus_attr->qas_enabled)
bus->flags |= IPR_SCSI_ATTR_ENABLE_QAS;
else
bus->flags |= IPR_SCSI_ATTR_DISABLE_QAS;
}
}
/**
* ipr_build_mode_select - Build a mode select command
* @ipr_cmd: ipr command struct
* @res_handle: resource handle to send command to
* @parm: Byte 2 of Mode Sense command
* @dma_addr: DMA buffer address
* @xfer_len: data transfer length
*
* Return value:
* none
**/
static void ipr_build_mode_select(struct ipr_cmnd *ipr_cmd,
__be32 res_handle, u8 parm,
dma_addr_t dma_addr, u8 xfer_len)
{
struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
ioarcb->res_handle = res_handle;
ioarcb->cmd_pkt.request_type = IPR_RQTYPE_SCSICDB;
ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ;
ioarcb->cmd_pkt.cdb[0] = MODE_SELECT;
ioarcb->cmd_pkt.cdb[1] = parm;
ioarcb->cmd_pkt.cdb[4] = xfer_len;
ipr_init_ioadl(ipr_cmd, dma_addr, xfer_len, IPR_IOADL_FLAGS_WRITE_LAST);
}
/**
* ipr_ioafp_mode_select_page28 - Issue Mode Select Page 28 to IOA
* @ipr_cmd: ipr command struct
*
* This function sets up the SCSI bus attributes and sends
* a Mode Select for Page 28 to activate them.
*
* Return value:
* IPR_RC_JOB_RETURN
**/
static int ipr_ioafp_mode_select_page28(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
struct ipr_mode_pages *mode_pages = &ioa_cfg->vpd_cbs->mode_pages;
int length;
ENTER;
ipr_scsi_bus_speed_limit(ioa_cfg);
ipr_check_term_power(ioa_cfg, mode_pages);
ipr_modify_ioafp_mode_page_28(ioa_cfg, mode_pages);
length = mode_pages->hdr.length + 1;
mode_pages->hdr.length = 0;
ipr_build_mode_select(ipr_cmd, cpu_to_be32(IPR_IOA_RES_HANDLE), 0x11,
ioa_cfg->vpd_cbs_dma + offsetof(struct ipr_misc_cbs, mode_pages),
length);
ipr_cmd->job_step = ipr_set_supported_devs;
ipr_cmd->u.res = list_entry(ioa_cfg->used_res_q.next,
struct ipr_resource_entry, queue);
ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, IPR_INTERNAL_TIMEOUT);
LEAVE;
return IPR_RC_JOB_RETURN;
}
/**
* ipr_build_mode_sense - Builds a mode sense command
* @ipr_cmd: ipr command struct
* @res: resource entry struct
* @parm: Byte 2 of mode sense command
* @dma_addr: DMA address of mode sense buffer
* @xfer_len: Size of DMA buffer
*
* Return value:
* none
**/
static void ipr_build_mode_sense(struct ipr_cmnd *ipr_cmd,
__be32 res_handle,
u8 parm, dma_addr_t dma_addr, u8 xfer_len)
{
struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
ioarcb->res_handle = res_handle;
ioarcb->cmd_pkt.cdb[0] = MODE_SENSE;
ioarcb->cmd_pkt.cdb[2] = parm;
ioarcb->cmd_pkt.cdb[4] = xfer_len;
ioarcb->cmd_pkt.request_type = IPR_RQTYPE_SCSICDB;
ipr_init_ioadl(ipr_cmd, dma_addr, xfer_len, IPR_IOADL_FLAGS_READ_LAST);
}
/**
* ipr_reset_cmd_failed - Handle failure of IOA reset command
* @ipr_cmd: ipr command struct
*
* This function handles the failure of an IOA bringup command.
*
* Return value:
* IPR_RC_JOB_RETURN
**/
static int ipr_reset_cmd_failed(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
u32 ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc);
dev_err(&ioa_cfg->pdev->dev,
"0x%02X failed with IOASC: 0x%08X\n",
ipr_cmd->ioarcb.cmd_pkt.cdb[0], ioasc);
ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
return IPR_RC_JOB_RETURN;
}
/**
* ipr_reset_mode_sense_failed - Handle failure of IOAFP mode sense
* @ipr_cmd: ipr command struct
*
* This function handles the failure of a Mode Sense to the IOAFP.
* Some adapters do not handle all mode pages.
*
* Return value:
* IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
**/
static int ipr_reset_mode_sense_failed(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
u32 ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc);
if (ioasc == IPR_IOASC_IR_INVALID_REQ_TYPE_OR_PKT) {
ipr_cmd->job_step = ipr_set_supported_devs;
ipr_cmd->u.res = list_entry(ioa_cfg->used_res_q.next,
struct ipr_resource_entry, queue);
return IPR_RC_JOB_CONTINUE;
}
return ipr_reset_cmd_failed(ipr_cmd);
}
/**
* ipr_ioafp_mode_sense_page28 - Issue Mode Sense Page 28 to IOA
* @ipr_cmd: ipr command struct
*
* This function send a Page 28 mode sense to the IOA to
* retrieve SCSI bus attributes.
*
* Return value:
* IPR_RC_JOB_RETURN
**/
static int ipr_ioafp_mode_sense_page28(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
ENTER;
ipr_build_mode_sense(ipr_cmd, cpu_to_be32(IPR_IOA_RES_HANDLE),
0x28, ioa_cfg->vpd_cbs_dma +
offsetof(struct ipr_misc_cbs, mode_pages),
sizeof(struct ipr_mode_pages));
ipr_cmd->job_step = ipr_ioafp_mode_select_page28;
ipr_cmd->job_step_failed = ipr_reset_mode_sense_failed;
ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, IPR_INTERNAL_TIMEOUT);
LEAVE;
return IPR_RC_JOB_RETURN;
}
/**
* ipr_ioafp_mode_select_page24 - Issue Mode Select to IOA
* @ipr_cmd: ipr command struct
*
* This function enables dual IOA RAID support if possible.
*
* Return value:
* IPR_RC_JOB_RETURN
**/
static int ipr_ioafp_mode_select_page24(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
struct ipr_mode_pages *mode_pages = &ioa_cfg->vpd_cbs->mode_pages;
struct ipr_mode_page24 *mode_page;
int length;
ENTER;
mode_page = ipr_get_mode_page(mode_pages, 0x24,
sizeof(struct ipr_mode_page24));
if (mode_page)
mode_page->flags |= IPR_ENABLE_DUAL_IOA_AF;
length = mode_pages->hdr.length + 1;
mode_pages->hdr.length = 0;
ipr_build_mode_select(ipr_cmd, cpu_to_be32(IPR_IOA_RES_HANDLE), 0x11,
ioa_cfg->vpd_cbs_dma + offsetof(struct ipr_misc_cbs, mode_pages),
length);
ipr_cmd->job_step = ipr_ioafp_mode_sense_page28;
ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, IPR_INTERNAL_TIMEOUT);
LEAVE;
return IPR_RC_JOB_RETURN;
}
/**
* ipr_reset_mode_sense_page24_failed - Handle failure of IOAFP mode sense
* @ipr_cmd: ipr command struct
*
* This function handles the failure of a Mode Sense to the IOAFP.
* Some adapters do not handle all mode pages.
*
* Return value:
* IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
**/
static int ipr_reset_mode_sense_page24_failed(struct ipr_cmnd *ipr_cmd)
{
u32 ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc);
if (ioasc == IPR_IOASC_IR_INVALID_REQ_TYPE_OR_PKT) {
ipr_cmd->job_step = ipr_ioafp_mode_sense_page28;
return IPR_RC_JOB_CONTINUE;
}
return ipr_reset_cmd_failed(ipr_cmd);
}
/**
* ipr_ioafp_mode_sense_page24 - Issue Page 24 Mode Sense to IOA
* @ipr_cmd: ipr command struct
*
* This function send a mode sense to the IOA to retrieve
* the IOA Advanced Function Control mode page.
*
* Return value:
* IPR_RC_JOB_RETURN
**/
static int ipr_ioafp_mode_sense_page24(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
ENTER;
ipr_build_mode_sense(ipr_cmd, cpu_to_be32(IPR_IOA_RES_HANDLE),
0x24, ioa_cfg->vpd_cbs_dma +
offsetof(struct ipr_misc_cbs, mode_pages),
sizeof(struct ipr_mode_pages));
ipr_cmd->job_step = ipr_ioafp_mode_select_page24;
ipr_cmd->job_step_failed = ipr_reset_mode_sense_page24_failed;
ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, IPR_INTERNAL_TIMEOUT);
LEAVE;
return IPR_RC_JOB_RETURN;
}
/**
* ipr_init_res_table - Initialize the resource table
* @ipr_cmd: ipr command struct
*
* This function looks through the existing resource table, comparing
* it with the config table. This function will take care of old/new
* devices and schedule adding/removing them from the mid-layer
* as appropriate.
*
* Return value:
* IPR_RC_JOB_CONTINUE
**/
static int ipr_init_res_table(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
struct ipr_resource_entry *res, *temp;
struct ipr_config_table_entry_wrapper cfgtew;
int entries, found, flag, i;
LIST_HEAD(old_res);
ENTER;
if (ioa_cfg->sis64)
flag = ioa_cfg->u.cfg_table64->hdr64.flags;
else
flag = ioa_cfg->u.cfg_table->hdr.flags;
if (flag & IPR_UCODE_DOWNLOAD_REQ)
dev_err(&ioa_cfg->pdev->dev, "Microcode download required\n");
list_for_each_entry_safe(res, temp, &ioa_cfg->used_res_q, queue)
list_move_tail(&res->queue, &old_res);
if (ioa_cfg->sis64)
entries = be16_to_cpu(ioa_cfg->u.cfg_table64->hdr64.num_entries);
else
entries = ioa_cfg->u.cfg_table->hdr.num_entries;
for (i = 0; i < entries; i++) {
if (ioa_cfg->sis64)
cfgtew.u.cfgte64 = &ioa_cfg->u.cfg_table64->dev[i];
else
cfgtew.u.cfgte = &ioa_cfg->u.cfg_table->dev[i];
found = 0;
list_for_each_entry_safe(res, temp, &old_res, queue) {
if (ipr_is_same_device(res, &cfgtew)) {
list_move_tail(&res->queue, &ioa_cfg->used_res_q);
found = 1;
break;
}
}
if (!found) {
if (list_empty(&ioa_cfg->free_res_q)) {
dev_err(&ioa_cfg->pdev->dev, "Too many devices attached\n");
break;
}
found = 1;
res = list_entry(ioa_cfg->free_res_q.next,
struct ipr_resource_entry, queue);
list_move_tail(&res->queue, &ioa_cfg->used_res_q);
ipr_init_res_entry(res, &cfgtew);
res->add_to_ml = 1;
} else if (res->sdev && (ipr_is_vset_device(res) || ipr_is_scsi_disk(res)))
res->sdev->allow_restart = 1;
if (found)
ipr_update_res_entry(res, &cfgtew);
}
list_for_each_entry_safe(res, temp, &old_res, queue) {
if (res->sdev) {
res->del_from_ml = 1;
res->res_handle = IPR_INVALID_RES_HANDLE;
list_move_tail(&res->queue, &ioa_cfg->used_res_q);
}
}
list_for_each_entry_safe(res, temp, &old_res, queue) {
ipr_clear_res_target(res);
list_move_tail(&res->queue, &ioa_cfg->free_res_q);
}
if (ioa_cfg->dual_raid && ipr_dual_ioa_raid)
ipr_cmd->job_step = ipr_ioafp_mode_sense_page24;
else
ipr_cmd->job_step = ipr_ioafp_mode_sense_page28;
LEAVE;
return IPR_RC_JOB_CONTINUE;
}
/**
* ipr_ioafp_query_ioa_cfg - Send a Query IOA Config to the adapter.
* @ipr_cmd: ipr command struct
*
* This function sends a Query IOA Configuration command
* to the adapter to retrieve the IOA configuration table.
*
* Return value:
* IPR_RC_JOB_RETURN
**/
static int ipr_ioafp_query_ioa_cfg(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
struct ipr_inquiry_page3 *ucode_vpd = &ioa_cfg->vpd_cbs->page3_data;
struct ipr_inquiry_cap *cap = &ioa_cfg->vpd_cbs->cap;
ENTER;
if (cap->cap & IPR_CAP_DUAL_IOA_RAID)
ioa_cfg->dual_raid = 1;
dev_info(&ioa_cfg->pdev->dev, "Adapter firmware version: %02X%02X%02X%02X\n",
ucode_vpd->major_release, ucode_vpd->card_type,
ucode_vpd->minor_release[0], ucode_vpd->minor_release[1]);
ioarcb->cmd_pkt.request_type = IPR_RQTYPE_IOACMD;
ioarcb->res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE);
ioarcb->cmd_pkt.cdb[0] = IPR_QUERY_IOA_CONFIG;
ioarcb->cmd_pkt.cdb[6] = (ioa_cfg->cfg_table_size >> 16) & 0xff;
ioarcb->cmd_pkt.cdb[7] = (ioa_cfg->cfg_table_size >> 8) & 0xff;
ioarcb->cmd_pkt.cdb[8] = ioa_cfg->cfg_table_size & 0xff;
ipr_init_ioadl(ipr_cmd, ioa_cfg->cfg_table_dma, ioa_cfg->cfg_table_size,
IPR_IOADL_FLAGS_READ_LAST);
ipr_cmd->job_step = ipr_init_res_table;
ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, IPR_INTERNAL_TIMEOUT);
LEAVE;
return IPR_RC_JOB_RETURN;
}
/**
* ipr_ioafp_inquiry - Send an Inquiry to the adapter.
* @ipr_cmd: ipr command struct
*
* This utility function sends an inquiry to the adapter.
*
* Return value:
* none
**/
static void ipr_ioafp_inquiry(struct ipr_cmnd *ipr_cmd, u8 flags, u8 page,
dma_addr_t dma_addr, u8 xfer_len)
{
struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
ENTER;
ioarcb->cmd_pkt.request_type = IPR_RQTYPE_SCSICDB;
ioarcb->res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE);
ioarcb->cmd_pkt.cdb[0] = INQUIRY;
ioarcb->cmd_pkt.cdb[1] = flags;
ioarcb->cmd_pkt.cdb[2] = page;
ioarcb->cmd_pkt.cdb[4] = xfer_len;
ipr_init_ioadl(ipr_cmd, dma_addr, xfer_len, IPR_IOADL_FLAGS_READ_LAST);
ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, IPR_INTERNAL_TIMEOUT);
LEAVE;
}
/**
* ipr_inquiry_page_supported - Is the given inquiry page supported
* @page0: inquiry page 0 buffer
* @page: page code.
*
* This function determines if the specified inquiry page is supported.
*
* Return value:
* 1 if page is supported / 0 if not
**/
static int ipr_inquiry_page_supported(struct ipr_inquiry_page0 *page0, u8 page)
{
int i;
for (i = 0; i < min_t(u8, page0->len, IPR_INQUIRY_PAGE0_ENTRIES); i++)
if (page0->page[i] == page)
return 1;
return 0;
}
/**
* ipr_ioafp_cap_inquiry - Send a Page 0xD0 Inquiry to the adapter.
* @ipr_cmd: ipr command struct
*
* This function sends a Page 0xD0 inquiry to the adapter
* to retrieve adapter capabilities.
*
* Return value:
* IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
**/
static int ipr_ioafp_cap_inquiry(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
struct ipr_inquiry_page0 *page0 = &ioa_cfg->vpd_cbs->page0_data;
struct ipr_inquiry_cap *cap = &ioa_cfg->vpd_cbs->cap;
ENTER;
ipr_cmd->job_step = ipr_ioafp_query_ioa_cfg;
memset(cap, 0, sizeof(*cap));
if (ipr_inquiry_page_supported(page0, 0xD0)) {
ipr_ioafp_inquiry(ipr_cmd, 1, 0xD0,
ioa_cfg->vpd_cbs_dma + offsetof(struct ipr_misc_cbs, cap),
sizeof(struct ipr_inquiry_cap));
return IPR_RC_JOB_RETURN;
}
LEAVE;
return IPR_RC_JOB_CONTINUE;
}
/**
* ipr_ioafp_page3_inquiry - Send a Page 3 Inquiry to the adapter.
* @ipr_cmd: ipr command struct
*
* This function sends a Page 3 inquiry to the adapter
* to retrieve software VPD information.
*
* Return value:
* IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
**/
static int ipr_ioafp_page3_inquiry(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
ENTER;
ipr_cmd->job_step = ipr_ioafp_cap_inquiry;
ipr_ioafp_inquiry(ipr_cmd, 1, 3,
ioa_cfg->vpd_cbs_dma + offsetof(struct ipr_misc_cbs, page3_data),
sizeof(struct ipr_inquiry_page3));
LEAVE;
return IPR_RC_JOB_RETURN;
}
/**
* ipr_ioafp_page0_inquiry - Send a Page 0 Inquiry to the adapter.
* @ipr_cmd: ipr command struct
*
* This function sends a Page 0 inquiry to the adapter
* to retrieve supported inquiry pages.
*
* Return value:
* IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
**/
static int ipr_ioafp_page0_inquiry(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
char type[5];
ENTER;
/* Grab the type out of the VPD and store it away */
memcpy(type, ioa_cfg->vpd_cbs->ioa_vpd.std_inq_data.vpids.product_id, 4);
type[4] = '\0';
ioa_cfg->type = simple_strtoul((char *)type, NULL, 16);
ipr_cmd->job_step = ipr_ioafp_page3_inquiry;
ipr_ioafp_inquiry(ipr_cmd, 1, 0,
ioa_cfg->vpd_cbs_dma + offsetof(struct ipr_misc_cbs, page0_data),
sizeof(struct ipr_inquiry_page0));
LEAVE;
return IPR_RC_JOB_RETURN;
}
/**
* ipr_ioafp_std_inquiry - Send a Standard Inquiry to the adapter.
* @ipr_cmd: ipr command struct
*
* This function sends a standard inquiry to the adapter.
*
* Return value:
* IPR_RC_JOB_RETURN
**/
static int ipr_ioafp_std_inquiry(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
ENTER;
ipr_cmd->job_step = ipr_ioafp_page0_inquiry;
ipr_ioafp_inquiry(ipr_cmd, 0, 0,
ioa_cfg->vpd_cbs_dma + offsetof(struct ipr_misc_cbs, ioa_vpd),
sizeof(struct ipr_ioa_vpd));
LEAVE;
return IPR_RC_JOB_RETURN;
}
/**
* ipr_ioafp_identify_hrrq - Send Identify Host RRQ.
* @ipr_cmd: ipr command struct
*
* This function send an Identify Host Request Response Queue
* command to establish the HRRQ with the adapter.
*
* Return value:
* IPR_RC_JOB_RETURN
**/
static int ipr_ioafp_identify_hrrq(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
ENTER;
dev_info(&ioa_cfg->pdev->dev, "Starting IOA initialization sequence.\n");
ioarcb->cmd_pkt.cdb[0] = IPR_ID_HOST_RR_Q;
ioarcb->res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE);
ioarcb->cmd_pkt.request_type = IPR_RQTYPE_IOACMD;
if (ioa_cfg->sis64)
ioarcb->cmd_pkt.cdb[1] = 0x1;
ioarcb->cmd_pkt.cdb[2] =
((u64) ioa_cfg->host_rrq_dma >> 24) & 0xff;
ioarcb->cmd_pkt.cdb[3] =
((u64) ioa_cfg->host_rrq_dma >> 16) & 0xff;
ioarcb->cmd_pkt.cdb[4] =
((u64) ioa_cfg->host_rrq_dma >> 8) & 0xff;
ioarcb->cmd_pkt.cdb[5] =
((u64) ioa_cfg->host_rrq_dma) & 0xff;
ioarcb->cmd_pkt.cdb[7] =
((sizeof(u32) * IPR_NUM_CMD_BLKS) >> 8) & 0xff;
ioarcb->cmd_pkt.cdb[8] =
(sizeof(u32) * IPR_NUM_CMD_BLKS) & 0xff;
if (ioa_cfg->sis64) {
ioarcb->cmd_pkt.cdb[10] =
((u64) ioa_cfg->host_rrq_dma >> 56) & 0xff;
ioarcb->cmd_pkt.cdb[11] =
((u64) ioa_cfg->host_rrq_dma >> 48) & 0xff;
ioarcb->cmd_pkt.cdb[12] =
((u64) ioa_cfg->host_rrq_dma >> 40) & 0xff;
ioarcb->cmd_pkt.cdb[13] =
((u64) ioa_cfg->host_rrq_dma >> 32) & 0xff;
}
ipr_cmd->job_step = ipr_ioafp_std_inquiry;
ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, IPR_INTERNAL_TIMEOUT);
LEAVE;
return IPR_RC_JOB_RETURN;
}
/**
* ipr_reset_timer_done - Adapter reset timer function
* @ipr_cmd: ipr command struct
*
* Description: This function is used in adapter reset processing
* for timing events. If the reset_cmd pointer in the IOA
* config struct is not this adapter's we are doing nested
* resets and fail_all_ops will take care of freeing the
* command block.
*
* Return value:
* none
**/
static void ipr_reset_timer_done(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
unsigned long lock_flags = 0;
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
if (ioa_cfg->reset_cmd == ipr_cmd) {
list_del(&ipr_cmd->queue);
ipr_cmd->done(ipr_cmd);
}
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
}
/**
* ipr_reset_start_timer - Start a timer for adapter reset job
* @ipr_cmd: ipr command struct
* @timeout: timeout value
*
* Description: This function is used in adapter reset processing
* for timing events. If the reset_cmd pointer in the IOA
* config struct is not this adapter's we are doing nested
* resets and fail_all_ops will take care of freeing the
* command block.
*
* Return value:
* none
**/
static void ipr_reset_start_timer(struct ipr_cmnd *ipr_cmd,
unsigned long timeout)
{
list_add_tail(&ipr_cmd->queue, &ipr_cmd->ioa_cfg->pending_q);
ipr_cmd->done = ipr_reset_ioa_job;
ipr_cmd->timer.data = (unsigned long) ipr_cmd;
ipr_cmd->timer.expires = jiffies + timeout;
ipr_cmd->timer.function = (void (*)(unsigned long))ipr_reset_timer_done;
add_timer(&ipr_cmd->timer);
}
/**
* ipr_init_ioa_mem - Initialize ioa_cfg control block
* @ioa_cfg: ioa cfg struct
*
* Return value:
* nothing
**/
static void ipr_init_ioa_mem(struct ipr_ioa_cfg *ioa_cfg)
{
memset(ioa_cfg->host_rrq, 0, sizeof(u32) * IPR_NUM_CMD_BLKS);
/* Initialize Host RRQ pointers */
ioa_cfg->hrrq_start = ioa_cfg->host_rrq;
ioa_cfg->hrrq_end = &ioa_cfg->host_rrq[IPR_NUM_CMD_BLKS - 1];
ioa_cfg->hrrq_curr = ioa_cfg->hrrq_start;
ioa_cfg->toggle_bit = 1;
/* Zero out config table */
memset(ioa_cfg->u.cfg_table, 0, ioa_cfg->cfg_table_size);
}
/**
* ipr_reset_next_stage - Process IPL stage change based on feedback register.
* @ipr_cmd: ipr command struct
*
* Return value:
* IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
**/
static int ipr_reset_next_stage(struct ipr_cmnd *ipr_cmd)
{
unsigned long stage, stage_time;
u32 feedback;
volatile u32 int_reg;
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
u64 maskval = 0;
feedback = readl(ioa_cfg->regs.init_feedback_reg);
stage = feedback & IPR_IPL_INIT_STAGE_MASK;
stage_time = feedback & IPR_IPL_INIT_STAGE_TIME_MASK;
ipr_dbg("IPL stage = 0x%lx, IPL stage time = %ld\n", stage, stage_time);
/* sanity check the stage_time value */
if (stage_time == 0)
stage_time = IPR_IPL_INIT_DEFAULT_STAGE_TIME;
else if (stage_time < IPR_IPL_INIT_MIN_STAGE_TIME)
stage_time = IPR_IPL_INIT_MIN_STAGE_TIME;
else if (stage_time > IPR_LONG_OPERATIONAL_TIMEOUT)
stage_time = IPR_LONG_OPERATIONAL_TIMEOUT;
if (stage == IPR_IPL_INIT_STAGE_UNKNOWN) {
writel(IPR_PCII_IPL_STAGE_CHANGE, ioa_cfg->regs.set_interrupt_mask_reg);
int_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg);
stage_time = ioa_cfg->transop_timeout;
ipr_cmd->job_step = ipr_ioafp_identify_hrrq;
} else if (stage == IPR_IPL_INIT_STAGE_TRANSOP) {
int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32);
if (int_reg & IPR_PCII_IOA_TRANS_TO_OPER) {
ipr_cmd->job_step = ipr_ioafp_identify_hrrq;
maskval = IPR_PCII_IPL_STAGE_CHANGE;
maskval = (maskval << 32) | IPR_PCII_IOA_TRANS_TO_OPER;
writeq(maskval, ioa_cfg->regs.set_interrupt_mask_reg);
int_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg);
return IPR_RC_JOB_CONTINUE;
}
}
ipr_cmd->timer.data = (unsigned long) ipr_cmd;
ipr_cmd->timer.expires = jiffies + stage_time * HZ;
ipr_cmd->timer.function = (void (*)(unsigned long))ipr_oper_timeout;
ipr_cmd->done = ipr_reset_ioa_job;
add_timer(&ipr_cmd->timer);
list_add_tail(&ipr_cmd->queue, &ioa_cfg->pending_q);
return IPR_RC_JOB_RETURN;
}
/**
* ipr_reset_enable_ioa - Enable the IOA following a reset.
* @ipr_cmd: ipr command struct
*
* This function reinitializes some control blocks and
* enables destructive diagnostics on the adapter.
*
* Return value:
* IPR_RC_JOB_RETURN
**/
static int ipr_reset_enable_ioa(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
volatile u32 int_reg;
volatile u64 maskval;
ENTER;
ipr_cmd->job_step = ipr_ioafp_identify_hrrq;
ipr_init_ioa_mem(ioa_cfg);
ioa_cfg->allow_interrupts = 1;
if (ioa_cfg->sis64) {
/* Set the adapter to the correct endian mode. */
writel(IPR_ENDIAN_SWAP_KEY, ioa_cfg->regs.endian_swap_reg);
int_reg = readl(ioa_cfg->regs.endian_swap_reg);
}
int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32);
if (int_reg & IPR_PCII_IOA_TRANS_TO_OPER) {
writel((IPR_PCII_ERROR_INTERRUPTS | IPR_PCII_HRRQ_UPDATED),
ioa_cfg->regs.clr_interrupt_mask_reg32);
int_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg);
return IPR_RC_JOB_CONTINUE;
}
/* Enable destructive diagnostics on IOA */
writel(ioa_cfg->doorbell, ioa_cfg->regs.set_uproc_interrupt_reg32);
if (ioa_cfg->sis64) {
maskval = IPR_PCII_IPL_STAGE_CHANGE;
maskval = (maskval << 32) | IPR_PCII_OPER_INTERRUPTS;
writeq(maskval, ioa_cfg->regs.clr_interrupt_mask_reg);
} else
writel(IPR_PCII_OPER_INTERRUPTS, ioa_cfg->regs.clr_interrupt_mask_reg32);
int_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg);
dev_info(&ioa_cfg->pdev->dev, "Initializing IOA.\n");
if (ioa_cfg->sis64) {
ipr_cmd->job_step = ipr_reset_next_stage;
return IPR_RC_JOB_CONTINUE;
}
ipr_cmd->timer.data = (unsigned long) ipr_cmd;
ipr_cmd->timer.expires = jiffies + (ioa_cfg->transop_timeout * HZ);
ipr_cmd->timer.function = (void (*)(unsigned long))ipr_oper_timeout;
ipr_cmd->done = ipr_reset_ioa_job;
add_timer(&ipr_cmd->timer);
list_add_tail(&ipr_cmd->queue, &ioa_cfg->pending_q);
LEAVE;
return IPR_RC_JOB_RETURN;
}
/**
* ipr_reset_wait_for_dump - Wait for a dump to timeout.
* @ipr_cmd: ipr command struct
*
* This function is invoked when an adapter dump has run out
* of processing time.
*
* Return value:
* IPR_RC_JOB_CONTINUE
**/
static int ipr_reset_wait_for_dump(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
if (ioa_cfg->sdt_state == GET_DUMP)
ioa_cfg->sdt_state = ABORT_DUMP;
ipr_cmd->job_step = ipr_reset_alert;
return IPR_RC_JOB_CONTINUE;
}
/**
* ipr_unit_check_no_data - Log a unit check/no data error log
* @ioa_cfg: ioa config struct
*
* Logs an error indicating the adapter unit checked, but for some
* reason, we were unable to fetch the unit check buffer.
*
* Return value:
* nothing
**/
static void ipr_unit_check_no_data(struct ipr_ioa_cfg *ioa_cfg)
{
ioa_cfg->errors_logged++;
dev_err(&ioa_cfg->pdev->dev, "IOA unit check with no data\n");
}
/**
* ipr_get_unit_check_buffer - Get the unit check buffer from the IOA
* @ioa_cfg: ioa config struct
*
* Fetches the unit check buffer from the adapter by clocking the data
* through the mailbox register.
*
* Return value:
* nothing
**/
static void ipr_get_unit_check_buffer(struct ipr_ioa_cfg *ioa_cfg)
{
unsigned long mailbox;
struct ipr_hostrcb *hostrcb;
struct ipr_uc_sdt sdt;
int rc, length;
u32 ioasc;
mailbox = readl(ioa_cfg->ioa_mailbox);
if (!ioa_cfg->sis64 && !ipr_sdt_is_fmt2(mailbox)) {
ipr_unit_check_no_data(ioa_cfg);
return;
}
memset(&sdt, 0, sizeof(struct ipr_uc_sdt));
rc = ipr_get_ldump_data_section(ioa_cfg, mailbox, (__be32 *) &sdt,
(sizeof(struct ipr_uc_sdt)) / sizeof(__be32));
if (rc || !(sdt.entry[0].flags & IPR_SDT_VALID_ENTRY) ||
((be32_to_cpu(sdt.hdr.state) != IPR_FMT3_SDT_READY_TO_USE) &&
(be32_to_cpu(sdt.hdr.state) != IPR_FMT2_SDT_READY_TO_USE))) {
ipr_unit_check_no_data(ioa_cfg);
return;
}
/* Find length of the first sdt entry (UC buffer) */
if (be32_to_cpu(sdt.hdr.state) == IPR_FMT3_SDT_READY_TO_USE)
length = be32_to_cpu(sdt.entry[0].end_token);
else
length = (be32_to_cpu(sdt.entry[0].end_token) -
be32_to_cpu(sdt.entry[0].start_token)) &
IPR_FMT2_MBX_ADDR_MASK;
hostrcb = list_entry(ioa_cfg->hostrcb_free_q.next,
struct ipr_hostrcb, queue);
list_del(&hostrcb->queue);
memset(&hostrcb->hcam, 0, sizeof(hostrcb->hcam));
rc = ipr_get_ldump_data_section(ioa_cfg,
be32_to_cpu(sdt.entry[0].start_token),
(__be32 *)&hostrcb->hcam,
min(length, (int)sizeof(hostrcb->hcam)) / sizeof(__be32));
if (!rc) {
ipr_handle_log_data(ioa_cfg, hostrcb);
ioasc = be32_to_cpu(hostrcb->hcam.u.error.fd_ioasc);
if (ioasc == IPR_IOASC_NR_IOA_RESET_REQUIRED &&
ioa_cfg->sdt_state == GET_DUMP)
ioa_cfg->sdt_state = WAIT_FOR_DUMP;
} else
ipr_unit_check_no_data(ioa_cfg);
list_add_tail(&hostrcb->queue, &ioa_cfg->hostrcb_free_q);
}
/**
* ipr_reset_restore_cfg_space - Restore PCI config space.
* @ipr_cmd: ipr command struct
*
* Description: This function restores the saved PCI config space of
* the adapter, fails all outstanding ops back to the callers, and
* fetches the dump/unit check if applicable to this reset.
*
* Return value:
* IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
**/
static int ipr_reset_restore_cfg_space(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
volatile u32 int_reg;
int rc;
ENTER;
[SCSI] ipr: fix EEH recovery After commits c82f63e411f1b58427c103bd95af2863b1c96dd1 (PCI: check saved state before restore) and 4b77b0a2ba27d64f58f16d8d4d48d8319dda36ff (PCI: Clear saved_state after the state has been restored) PCI drivers are prevented from restoring the device standard configuration registers twice in a row. These changes introduced a regression on ipr EEH recovery. The ipr device driver saves the PCI state only during the device probe and restores it on ipr_reset_restore_cfg_space() during IOA resets. This behavior is causing the EEH recovery to fail after the second error detected, since the registers are not being restored. One possible solution would be saving the registers after restoring them. The problem with this approach is that while recovering from an EEH error if pci_save_state() results in an EEH error, the adapter/slot will be reset, and end up back in ipr_reset_restore_cfg_space(), but it won't have a valid saved state to restore, so pci_restore_state() will fail. The following patch introduces a workaround for this problem, hacking around the PCI API by setting pdev->state_saved = true before we do the restore. It fixes the EEH regression and prevents that we hit another EEH error during EEH recovery. [jejb: fix is a hack ... Jesse and Rafael will fix properly] Signed-off-by: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: stable@kernel.org Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-11-25 23:13:43 +01:00
ioa_cfg->pdev->state_saved = true;
rc = pci_restore_state(ioa_cfg->pdev);
if (rc != PCIBIOS_SUCCESSFUL) {
ipr_cmd->s.ioasa.hdr.ioasc = cpu_to_be32(IPR_IOASC_PCI_ACCESS_ERROR);
return IPR_RC_JOB_CONTINUE;
}
if (ipr_set_pcix_cmd_reg(ioa_cfg)) {
ipr_cmd->s.ioasa.hdr.ioasc = cpu_to_be32(IPR_IOASC_PCI_ACCESS_ERROR);
return IPR_RC_JOB_CONTINUE;
}
ipr_fail_all_ops(ioa_cfg);
if (ioa_cfg->sis64) {
/* Set the adapter to the correct endian mode. */
writel(IPR_ENDIAN_SWAP_KEY, ioa_cfg->regs.endian_swap_reg);
int_reg = readl(ioa_cfg->regs.endian_swap_reg);
}
if (ioa_cfg->ioa_unit_checked) {
ioa_cfg->ioa_unit_checked = 0;
ipr_get_unit_check_buffer(ioa_cfg);
ipr_cmd->job_step = ipr_reset_alert;
ipr_reset_start_timer(ipr_cmd, 0);
return IPR_RC_JOB_RETURN;
}
if (ioa_cfg->in_ioa_bringdown) {
ipr_cmd->job_step = ipr_ioa_bringdown_done;
} else {
ipr_cmd->job_step = ipr_reset_enable_ioa;
if (GET_DUMP == ioa_cfg->sdt_state) {
ipr_reset_start_timer(ipr_cmd, IPR_DUMP_TIMEOUT);
ipr_cmd->job_step = ipr_reset_wait_for_dump;
schedule_work(&ioa_cfg->work_q);
return IPR_RC_JOB_RETURN;
}
}
LEAVE;
return IPR_RC_JOB_CONTINUE;
}
/**
* ipr_reset_bist_done - BIST has completed on the adapter.
* @ipr_cmd: ipr command struct
*
* Description: Unblock config space and resume the reset process.
*
* Return value:
* IPR_RC_JOB_CONTINUE
**/
static int ipr_reset_bist_done(struct ipr_cmnd *ipr_cmd)
{
ENTER;
pci_unblock_user_cfg_access(ipr_cmd->ioa_cfg->pdev);
ipr_cmd->job_step = ipr_reset_restore_cfg_space;
LEAVE;
return IPR_RC_JOB_CONTINUE;
}
/**
* ipr_reset_start_bist - Run BIST on the adapter.
* @ipr_cmd: ipr command struct
*
* Description: This function runs BIST on the adapter, then delays 2 seconds.
*
* Return value:
* IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
**/
static int ipr_reset_start_bist(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
int rc = PCIBIOS_SUCCESSFUL;
ENTER;
pci_block_user_cfg_access(ioa_cfg->pdev);
if (ioa_cfg->ipr_chip->bist_method == IPR_MMIO)
writel(IPR_UPROCI_SIS64_START_BIST,
ioa_cfg->regs.set_uproc_interrupt_reg32);
else
rc = pci_write_config_byte(ioa_cfg->pdev, PCI_BIST, PCI_BIST_START);
if (rc == PCIBIOS_SUCCESSFUL) {
ipr_cmd->job_step = ipr_reset_bist_done;
ipr_reset_start_timer(ipr_cmd, IPR_WAIT_FOR_BIST_TIMEOUT);
rc = IPR_RC_JOB_RETURN;
} else {
pci_unblock_user_cfg_access(ipr_cmd->ioa_cfg->pdev);
ipr_cmd->s.ioasa.hdr.ioasc = cpu_to_be32(IPR_IOASC_PCI_ACCESS_ERROR);
rc = IPR_RC_JOB_CONTINUE;
}
LEAVE;
return rc;
}
/**
* ipr_reset_slot_reset_done - Clear PCI reset to the adapter
* @ipr_cmd: ipr command struct
*
* Description: This clears PCI reset to the adapter and delays two seconds.
*
* Return value:
* IPR_RC_JOB_RETURN
**/
static int ipr_reset_slot_reset_done(struct ipr_cmnd *ipr_cmd)
{
ENTER;
pci_set_pcie_reset_state(ipr_cmd->ioa_cfg->pdev, pcie_deassert_reset);
ipr_cmd->job_step = ipr_reset_bist_done;
ipr_reset_start_timer(ipr_cmd, IPR_WAIT_FOR_BIST_TIMEOUT);
LEAVE;
return IPR_RC_JOB_RETURN;
}
/**
* ipr_reset_slot_reset - Reset the PCI slot of the adapter.
* @ipr_cmd: ipr command struct
*
* Description: This asserts PCI reset to the adapter.
*
* Return value:
* IPR_RC_JOB_RETURN
**/
static int ipr_reset_slot_reset(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
struct pci_dev *pdev = ioa_cfg->pdev;
ENTER;
pci_block_user_cfg_access(pdev);
pci_set_pcie_reset_state(pdev, pcie_warm_reset);
ipr_cmd->job_step = ipr_reset_slot_reset_done;
ipr_reset_start_timer(ipr_cmd, IPR_PCI_RESET_TIMEOUT);
LEAVE;
return IPR_RC_JOB_RETURN;
}
/**
* ipr_reset_allowed - Query whether or not IOA can be reset
* @ioa_cfg: ioa config struct
*
* Return value:
* 0 if reset not allowed / non-zero if reset is allowed
**/
static int ipr_reset_allowed(struct ipr_ioa_cfg *ioa_cfg)
{
volatile u32 temp_reg;
temp_reg = readl(ioa_cfg->regs.sense_interrupt_reg);
return ((temp_reg & IPR_PCII_CRITICAL_OPERATION) == 0);
}
/**
* ipr_reset_wait_to_start_bist - Wait for permission to reset IOA.
* @ipr_cmd: ipr command struct
*
* Description: This function waits for adapter permission to run BIST,
* then runs BIST. If the adapter does not give permission after a
* reasonable time, we will reset the adapter anyway. The impact of
* resetting the adapter without warning the adapter is the risk of
* losing the persistent error log on the adapter. If the adapter is
* reset while it is writing to the flash on the adapter, the flash
* segment will have bad ECC and be zeroed.
*
* Return value:
* IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
**/
static int ipr_reset_wait_to_start_bist(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
int rc = IPR_RC_JOB_RETURN;
if (!ipr_reset_allowed(ioa_cfg) && ipr_cmd->u.time_left) {
ipr_cmd->u.time_left -= IPR_CHECK_FOR_RESET_TIMEOUT;
ipr_reset_start_timer(ipr_cmd, IPR_CHECK_FOR_RESET_TIMEOUT);
} else {
ipr_cmd->job_step = ioa_cfg->reset;
rc = IPR_RC_JOB_CONTINUE;
}
return rc;
}
/**
* ipr_reset_alert - Alert the adapter of a pending reset
* @ipr_cmd: ipr command struct
*
* Description: This function alerts the adapter that it will be reset.
* If memory space is not currently enabled, proceed directly
* to running BIST on the adapter. The timer must always be started
* so we guarantee we do not run BIST from ipr_isr.
*
* Return value:
* IPR_RC_JOB_RETURN
**/
static int ipr_reset_alert(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
u16 cmd_reg;
int rc;
ENTER;
rc = pci_read_config_word(ioa_cfg->pdev, PCI_COMMAND, &cmd_reg);
if ((rc == PCIBIOS_SUCCESSFUL) && (cmd_reg & PCI_COMMAND_MEMORY)) {
ipr_mask_and_clear_interrupts(ioa_cfg, ~0);
writel(IPR_UPROCI_RESET_ALERT, ioa_cfg->regs.set_uproc_interrupt_reg32);
ipr_cmd->job_step = ipr_reset_wait_to_start_bist;
} else {
ipr_cmd->job_step = ioa_cfg->reset;
}
ipr_cmd->u.time_left = IPR_WAIT_FOR_RESET_TIMEOUT;
ipr_reset_start_timer(ipr_cmd, IPR_CHECK_FOR_RESET_TIMEOUT);
LEAVE;
return IPR_RC_JOB_RETURN;
}
/**
* ipr_reset_ucode_download_done - Microcode download completion
* @ipr_cmd: ipr command struct
*
* Description: This function unmaps the microcode download buffer.
*
* Return value:
* IPR_RC_JOB_CONTINUE
**/
static int ipr_reset_ucode_download_done(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
struct ipr_sglist *sglist = ioa_cfg->ucode_sglist;
pci_unmap_sg(ioa_cfg->pdev, sglist->scatterlist,
sglist->num_sg, DMA_TO_DEVICE);
ipr_cmd->job_step = ipr_reset_alert;
return IPR_RC_JOB_CONTINUE;
}
/**
* ipr_reset_ucode_download - Download microcode to the adapter
* @ipr_cmd: ipr command struct
*
* Description: This function checks to see if it there is microcode
* to download to the adapter. If there is, a download is performed.
*
* Return value:
* IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
**/
static int ipr_reset_ucode_download(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
struct ipr_sglist *sglist = ioa_cfg->ucode_sglist;
ENTER;
ipr_cmd->job_step = ipr_reset_alert;
if (!sglist)
return IPR_RC_JOB_CONTINUE;
ipr_cmd->ioarcb.res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE);
ipr_cmd->ioarcb.cmd_pkt.request_type = IPR_RQTYPE_SCSICDB;
ipr_cmd->ioarcb.cmd_pkt.cdb[0] = WRITE_BUFFER;
ipr_cmd->ioarcb.cmd_pkt.cdb[1] = IPR_WR_BUF_DOWNLOAD_AND_SAVE;
ipr_cmd->ioarcb.cmd_pkt.cdb[6] = (sglist->buffer_len & 0xff0000) >> 16;
ipr_cmd->ioarcb.cmd_pkt.cdb[7] = (sglist->buffer_len & 0x00ff00) >> 8;
ipr_cmd->ioarcb.cmd_pkt.cdb[8] = sglist->buffer_len & 0x0000ff;
if (ioa_cfg->sis64)
ipr_build_ucode_ioadl64(ipr_cmd, sglist);
else
ipr_build_ucode_ioadl(ipr_cmd, sglist);
ipr_cmd->job_step = ipr_reset_ucode_download_done;
ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout,
IPR_WRITE_BUFFER_TIMEOUT);
LEAVE;
return IPR_RC_JOB_RETURN;
}
/**
* ipr_reset_shutdown_ioa - Shutdown the adapter
* @ipr_cmd: ipr command struct
*
* Description: This function issues an adapter shutdown of the
* specified type to the specified adapter as part of the
* adapter reset job.
*
* Return value:
* IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
**/
static int ipr_reset_shutdown_ioa(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
enum ipr_shutdown_type shutdown_type = ipr_cmd->u.shutdown_type;
unsigned long timeout;
int rc = IPR_RC_JOB_CONTINUE;
ENTER;
if (shutdown_type != IPR_SHUTDOWN_NONE && !ioa_cfg->ioa_is_dead) {
ipr_cmd->ioarcb.res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE);
ipr_cmd->ioarcb.cmd_pkt.request_type = IPR_RQTYPE_IOACMD;
ipr_cmd->ioarcb.cmd_pkt.cdb[0] = IPR_IOA_SHUTDOWN;
ipr_cmd->ioarcb.cmd_pkt.cdb[1] = shutdown_type;
if (shutdown_type == IPR_SHUTDOWN_NORMAL)
timeout = IPR_SHUTDOWN_TIMEOUT;
else if (shutdown_type == IPR_SHUTDOWN_PREPARE_FOR_NORMAL)
timeout = IPR_INTERNAL_TIMEOUT;
else if (ioa_cfg->dual_raid && ipr_dual_ioa_raid)
timeout = IPR_DUAL_IOA_ABBR_SHUTDOWN_TO;
else
timeout = IPR_ABBREV_SHUTDOWN_TIMEOUT;
ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, timeout);
rc = IPR_RC_JOB_RETURN;
ipr_cmd->job_step = ipr_reset_ucode_download;
} else
ipr_cmd->job_step = ipr_reset_alert;
LEAVE;
return rc;
}
/**
* ipr_reset_ioa_job - Adapter reset job
* @ipr_cmd: ipr command struct
*
* Description: This function is the job router for the adapter reset job.
*
* Return value:
* none
**/
static void ipr_reset_ioa_job(struct ipr_cmnd *ipr_cmd)
{
u32 rc, ioasc;
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
do {
ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc);
if (ioa_cfg->reset_cmd != ipr_cmd) {
/*
* We are doing nested adapter resets and this is
* not the current reset job.
*/
list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
return;
}
if (IPR_IOASC_SENSE_KEY(ioasc)) {
rc = ipr_cmd->job_step_failed(ipr_cmd);
if (rc == IPR_RC_JOB_RETURN)
return;
}
ipr_reinit_ipr_cmnd(ipr_cmd);
ipr_cmd->job_step_failed = ipr_reset_cmd_failed;
rc = ipr_cmd->job_step(ipr_cmd);
} while(rc == IPR_RC_JOB_CONTINUE);
}
/**
* _ipr_initiate_ioa_reset - Initiate an adapter reset
* @ioa_cfg: ioa config struct
* @job_step: first job step of reset job
* @shutdown_type: shutdown type
*
* Description: This function will initiate the reset of the given adapter
* starting at the selected job step.
* If the caller needs to wait on the completion of the reset,
* the caller must sleep on the reset_wait_q.
*
* Return value:
* none
**/
static void _ipr_initiate_ioa_reset(struct ipr_ioa_cfg *ioa_cfg,
int (*job_step) (struct ipr_cmnd *),
enum ipr_shutdown_type shutdown_type)
{
struct ipr_cmnd *ipr_cmd;
ioa_cfg->in_reset_reload = 1;
ioa_cfg->allow_cmds = 0;
scsi_block_requests(ioa_cfg->host);
ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg);
ioa_cfg->reset_cmd = ipr_cmd;
ipr_cmd->job_step = job_step;
ipr_cmd->u.shutdown_type = shutdown_type;
ipr_reset_ioa_job(ipr_cmd);
}
/**
* ipr_initiate_ioa_reset - Initiate an adapter reset
* @ioa_cfg: ioa config struct
* @shutdown_type: shutdown type
*
* Description: This function will initiate the reset of the given adapter.
* If the caller needs to wait on the completion of the reset,
* the caller must sleep on the reset_wait_q.
*
* Return value:
* none
**/
static void ipr_initiate_ioa_reset(struct ipr_ioa_cfg *ioa_cfg,
enum ipr_shutdown_type shutdown_type)
{
if (ioa_cfg->ioa_is_dead)
return;
if (ioa_cfg->in_reset_reload && ioa_cfg->sdt_state == GET_DUMP)
ioa_cfg->sdt_state = ABORT_DUMP;
if (ioa_cfg->reset_retries++ >= IPR_NUM_RESET_RELOAD_RETRIES) {
dev_err(&ioa_cfg->pdev->dev,
"IOA taken offline - error recovery failed\n");
ioa_cfg->reset_retries = 0;
ioa_cfg->ioa_is_dead = 1;
if (ioa_cfg->in_ioa_bringdown) {
ioa_cfg->reset_cmd = NULL;
ioa_cfg->in_reset_reload = 0;
ipr_fail_all_ops(ioa_cfg);
wake_up_all(&ioa_cfg->reset_wait_q);
spin_unlock_irq(ioa_cfg->host->host_lock);
scsi_unblock_requests(ioa_cfg->host);
spin_lock_irq(ioa_cfg->host->host_lock);
return;
} else {
ioa_cfg->in_ioa_bringdown = 1;
shutdown_type = IPR_SHUTDOWN_NONE;
}
}
_ipr_initiate_ioa_reset(ioa_cfg, ipr_reset_shutdown_ioa,
shutdown_type);
}
/**
* ipr_reset_freeze - Hold off all I/O activity
* @ipr_cmd: ipr command struct
*
* Description: If the PCI slot is frozen, hold off all I/O
* activity; then, as soon as the slot is available again,
* initiate an adapter reset.
*/
static int ipr_reset_freeze(struct ipr_cmnd *ipr_cmd)
{
/* Disallow new interrupts, avoid loop */
ipr_cmd->ioa_cfg->allow_interrupts = 0;
list_add_tail(&ipr_cmd->queue, &ipr_cmd->ioa_cfg->pending_q);
ipr_cmd->done = ipr_reset_ioa_job;
return IPR_RC_JOB_RETURN;
}
/**
* ipr_pci_frozen - Called when slot has experienced a PCI bus error.
* @pdev: PCI device struct
*
* Description: This routine is called to tell us that the PCI bus
* is down. Can't do anything here, except put the device driver
* into a holding pattern, waiting for the PCI bus to come back.
*/
static void ipr_pci_frozen(struct pci_dev *pdev)
{
unsigned long flags = 0;
struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(pdev);
spin_lock_irqsave(ioa_cfg->host->host_lock, flags);
_ipr_initiate_ioa_reset(ioa_cfg, ipr_reset_freeze, IPR_SHUTDOWN_NONE);
spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags);
}
/**
* ipr_pci_slot_reset - Called when PCI slot has been reset.
* @pdev: PCI device struct
*
* Description: This routine is called by the pci error recovery
* code after the PCI slot has been reset, just before we
* should resume normal operations.
*/
static pci_ers_result_t ipr_pci_slot_reset(struct pci_dev *pdev)
{
unsigned long flags = 0;
struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(pdev);
spin_lock_irqsave(ioa_cfg->host->host_lock, flags);
if (ioa_cfg->needs_warm_reset)
ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
else
_ipr_initiate_ioa_reset(ioa_cfg, ipr_reset_restore_cfg_space,
IPR_SHUTDOWN_NONE);
spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags);
return PCI_ERS_RESULT_RECOVERED;
}
/**
* ipr_pci_perm_failure - Called when PCI slot is dead for good.
* @pdev: PCI device struct
*
* Description: This routine is called when the PCI bus has
* permanently failed.
*/
static void ipr_pci_perm_failure(struct pci_dev *pdev)
{
unsigned long flags = 0;
struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(pdev);
spin_lock_irqsave(ioa_cfg->host->host_lock, flags);
if (ioa_cfg->sdt_state == WAIT_FOR_DUMP)
ioa_cfg->sdt_state = ABORT_DUMP;
ioa_cfg->reset_retries = IPR_NUM_RESET_RELOAD_RETRIES;
ioa_cfg->in_ioa_bringdown = 1;
ioa_cfg->allow_cmds = 0;
ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags);
}
/**
* ipr_pci_error_detected - Called when a PCI error is detected.
* @pdev: PCI device struct
* @state: PCI channel state
*
* Description: Called when a PCI error is detected.
*
* Return value:
* PCI_ERS_RESULT_NEED_RESET or PCI_ERS_RESULT_DISCONNECT
*/
static pci_ers_result_t ipr_pci_error_detected(struct pci_dev *pdev,
pci_channel_state_t state)
{
switch (state) {
case pci_channel_io_frozen:
ipr_pci_frozen(pdev);
return PCI_ERS_RESULT_NEED_RESET;
case pci_channel_io_perm_failure:
ipr_pci_perm_failure(pdev);
return PCI_ERS_RESULT_DISCONNECT;
break;
default:
break;
}
return PCI_ERS_RESULT_NEED_RESET;
}
/**
* ipr_probe_ioa_part2 - Initializes IOAs found in ipr_probe_ioa(..)
* @ioa_cfg: ioa cfg struct
*
* Description: This is the second phase of adapter intialization
* This function takes care of initilizing the adapter to the point
* where it can accept new commands.
* Return value:
* 0 on success / -EIO on failure
**/
static int __devinit ipr_probe_ioa_part2(struct ipr_ioa_cfg *ioa_cfg)
{
int rc = 0;
unsigned long host_lock_flags = 0;
ENTER;
spin_lock_irqsave(ioa_cfg->host->host_lock, host_lock_flags);
dev_dbg(&ioa_cfg->pdev->dev, "ioa_cfg adx: 0x%p\n", ioa_cfg);
if (ioa_cfg->needs_hard_reset) {
ioa_cfg->needs_hard_reset = 0;
ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
} else
_ipr_initiate_ioa_reset(ioa_cfg, ipr_reset_enable_ioa,
IPR_SHUTDOWN_NONE);
spin_unlock_irqrestore(ioa_cfg->host->host_lock, host_lock_flags);
wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
spin_lock_irqsave(ioa_cfg->host->host_lock, host_lock_flags);
if (ioa_cfg->ioa_is_dead) {
rc = -EIO;
} else if (ipr_invalid_adapter(ioa_cfg)) {
if (!ipr_testmode)
rc = -EIO;
dev_err(&ioa_cfg->pdev->dev,
"Adapter not supported in this hardware configuration.\n");
}
spin_unlock_irqrestore(ioa_cfg->host->host_lock, host_lock_flags);
LEAVE;
return rc;
}
/**
* ipr_free_cmd_blks - Frees command blocks allocated for an adapter
* @ioa_cfg: ioa config struct
*
* Return value:
* none
**/
static void ipr_free_cmd_blks(struct ipr_ioa_cfg *ioa_cfg)
{
int i;
for (i = 0; i < IPR_NUM_CMD_BLKS; i++) {
if (ioa_cfg->ipr_cmnd_list[i])
pci_pool_free(ioa_cfg->ipr_cmd_pool,
ioa_cfg->ipr_cmnd_list[i],
ioa_cfg->ipr_cmnd_list_dma[i]);
ioa_cfg->ipr_cmnd_list[i] = NULL;
}
if (ioa_cfg->ipr_cmd_pool)
pci_pool_destroy (ioa_cfg->ipr_cmd_pool);
ioa_cfg->ipr_cmd_pool = NULL;
}
/**
* ipr_free_mem - Frees memory allocated for an adapter
* @ioa_cfg: ioa cfg struct
*
* Return value:
* nothing
**/
static void ipr_free_mem(struct ipr_ioa_cfg *ioa_cfg)
{
int i;
kfree(ioa_cfg->res_entries);
pci_free_consistent(ioa_cfg->pdev, sizeof(struct ipr_misc_cbs),
ioa_cfg->vpd_cbs, ioa_cfg->vpd_cbs_dma);
ipr_free_cmd_blks(ioa_cfg);
pci_free_consistent(ioa_cfg->pdev, sizeof(u32) * IPR_NUM_CMD_BLKS,
ioa_cfg->host_rrq, ioa_cfg->host_rrq_dma);
pci_free_consistent(ioa_cfg->pdev, ioa_cfg->cfg_table_size,
ioa_cfg->u.cfg_table,
ioa_cfg->cfg_table_dma);
for (i = 0; i < IPR_NUM_HCAMS; i++) {
pci_free_consistent(ioa_cfg->pdev,
sizeof(struct ipr_hostrcb),
ioa_cfg->hostrcb[i],
ioa_cfg->hostrcb_dma[i]);
}
ipr_free_dump(ioa_cfg);
kfree(ioa_cfg->trace);
}
/**
* ipr_free_all_resources - Free all allocated resources for an adapter.
* @ipr_cmd: ipr command struct
*
* This function frees all allocated resources for the
* specified adapter.
*
* Return value:
* none
**/
static void ipr_free_all_resources(struct ipr_ioa_cfg *ioa_cfg)
{
struct pci_dev *pdev = ioa_cfg->pdev;
ENTER;
free_irq(pdev->irq, ioa_cfg);
pci_disable_msi(pdev);
iounmap(ioa_cfg->hdw_dma_regs);
pci_release_regions(pdev);
ipr_free_mem(ioa_cfg);
scsi_host_put(ioa_cfg->host);
pci_disable_device(pdev);
LEAVE;
}
/**
* ipr_alloc_cmd_blks - Allocate command blocks for an adapter
* @ioa_cfg: ioa config struct
*
* Return value:
* 0 on success / -ENOMEM on allocation failure
**/
static int __devinit ipr_alloc_cmd_blks(struct ipr_ioa_cfg *ioa_cfg)
{
struct ipr_cmnd *ipr_cmd;
struct ipr_ioarcb *ioarcb;
dma_addr_t dma_addr;
int i;
ioa_cfg->ipr_cmd_pool = pci_pool_create (IPR_NAME, ioa_cfg->pdev,
sizeof(struct ipr_cmnd), 16, 0);
if (!ioa_cfg->ipr_cmd_pool)
return -ENOMEM;
for (i = 0; i < IPR_NUM_CMD_BLKS; i++) {
ipr_cmd = pci_pool_alloc (ioa_cfg->ipr_cmd_pool, GFP_KERNEL, &dma_addr);
if (!ipr_cmd) {
ipr_free_cmd_blks(ioa_cfg);
return -ENOMEM;
}
memset(ipr_cmd, 0, sizeof(*ipr_cmd));
ioa_cfg->ipr_cmnd_list[i] = ipr_cmd;
ioa_cfg->ipr_cmnd_list_dma[i] = dma_addr;
ioarcb = &ipr_cmd->ioarcb;
ipr_cmd->dma_addr = dma_addr;
if (ioa_cfg->sis64)
ioarcb->a.ioarcb_host_pci_addr64 = cpu_to_be64(dma_addr);
else
ioarcb->a.ioarcb_host_pci_addr = cpu_to_be32(dma_addr);
ioarcb->host_response_handle = cpu_to_be32(i << 2);
if (ioa_cfg->sis64) {
ioarcb->u.sis64_addr_data.data_ioadl_addr =
cpu_to_be64(dma_addr + offsetof(struct ipr_cmnd, i.ioadl64));
ioarcb->u.sis64_addr_data.ioasa_host_pci_addr =
cpu_to_be64(dma_addr + offsetof(struct ipr_cmnd, s.ioasa64));
} else {
ioarcb->write_ioadl_addr =
cpu_to_be32(dma_addr + offsetof(struct ipr_cmnd, i.ioadl));
ioarcb->read_ioadl_addr = ioarcb->write_ioadl_addr;
ioarcb->ioasa_host_pci_addr =
cpu_to_be32(dma_addr + offsetof(struct ipr_cmnd, s.ioasa));
}
ioarcb->ioasa_len = cpu_to_be16(sizeof(struct ipr_ioasa));
ipr_cmd->cmd_index = i;
ipr_cmd->ioa_cfg = ioa_cfg;
ipr_cmd->sense_buffer_dma = dma_addr +
offsetof(struct ipr_cmnd, sense_buffer);
list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
}
return 0;
}
/**
* ipr_alloc_mem - Allocate memory for an adapter
* @ioa_cfg: ioa config struct
*
* Return value:
* 0 on success / non-zero for error
**/
static int __devinit ipr_alloc_mem(struct ipr_ioa_cfg *ioa_cfg)
{
struct pci_dev *pdev = ioa_cfg->pdev;
int i, rc = -ENOMEM;
ENTER;
ioa_cfg->res_entries = kzalloc(sizeof(struct ipr_resource_entry) *
ioa_cfg->max_devs_supported, GFP_KERNEL);
if (!ioa_cfg->res_entries)
goto out;
if (ioa_cfg->sis64) {
ioa_cfg->target_ids = kzalloc(sizeof(unsigned long) *
BITS_TO_LONGS(ioa_cfg->max_devs_supported), GFP_KERNEL);
ioa_cfg->array_ids = kzalloc(sizeof(unsigned long) *
BITS_TO_LONGS(ioa_cfg->max_devs_supported), GFP_KERNEL);
ioa_cfg->vset_ids = kzalloc(sizeof(unsigned long) *
BITS_TO_LONGS(ioa_cfg->max_devs_supported), GFP_KERNEL);
}
for (i = 0; i < ioa_cfg->max_devs_supported; i++) {
list_add_tail(&ioa_cfg->res_entries[i].queue, &ioa_cfg->free_res_q);
ioa_cfg->res_entries[i].ioa_cfg = ioa_cfg;
}
ioa_cfg->vpd_cbs = pci_alloc_consistent(ioa_cfg->pdev,
sizeof(struct ipr_misc_cbs),
&ioa_cfg->vpd_cbs_dma);
if (!ioa_cfg->vpd_cbs)
goto out_free_res_entries;
if (ipr_alloc_cmd_blks(ioa_cfg))
goto out_free_vpd_cbs;
ioa_cfg->host_rrq = pci_alloc_consistent(ioa_cfg->pdev,
sizeof(u32) * IPR_NUM_CMD_BLKS,
&ioa_cfg->host_rrq_dma);
if (!ioa_cfg->host_rrq)
goto out_ipr_free_cmd_blocks;
ioa_cfg->u.cfg_table = pci_alloc_consistent(ioa_cfg->pdev,
ioa_cfg->cfg_table_size,
&ioa_cfg->cfg_table_dma);
if (!ioa_cfg->u.cfg_table)
goto out_free_host_rrq;
for (i = 0; i < IPR_NUM_HCAMS; i++) {
ioa_cfg->hostrcb[i] = pci_alloc_consistent(ioa_cfg->pdev,
sizeof(struct ipr_hostrcb),
&ioa_cfg->hostrcb_dma[i]);
if (!ioa_cfg->hostrcb[i])
goto out_free_hostrcb_dma;
ioa_cfg->hostrcb[i]->hostrcb_dma =
ioa_cfg->hostrcb_dma[i] + offsetof(struct ipr_hostrcb, hcam);
ioa_cfg->hostrcb[i]->ioa_cfg = ioa_cfg;
list_add_tail(&ioa_cfg->hostrcb[i]->queue, &ioa_cfg->hostrcb_free_q);
}
ioa_cfg->trace = kzalloc(sizeof(struct ipr_trace_entry) *
IPR_NUM_TRACE_ENTRIES, GFP_KERNEL);
if (!ioa_cfg->trace)
goto out_free_hostrcb_dma;
rc = 0;
out:
LEAVE;
return rc;
out_free_hostrcb_dma:
while (i-- > 0) {
pci_free_consistent(pdev, sizeof(struct ipr_hostrcb),
ioa_cfg->hostrcb[i],
ioa_cfg->hostrcb_dma[i]);
}
pci_free_consistent(pdev, ioa_cfg->cfg_table_size,
ioa_cfg->u.cfg_table,
ioa_cfg->cfg_table_dma);
out_free_host_rrq:
pci_free_consistent(pdev, sizeof(u32) * IPR_NUM_CMD_BLKS,
ioa_cfg->host_rrq, ioa_cfg->host_rrq_dma);
out_ipr_free_cmd_blocks:
ipr_free_cmd_blks(ioa_cfg);
out_free_vpd_cbs:
pci_free_consistent(pdev, sizeof(struct ipr_misc_cbs),
ioa_cfg->vpd_cbs, ioa_cfg->vpd_cbs_dma);
out_free_res_entries:
kfree(ioa_cfg->res_entries);
goto out;
}
/**
* ipr_initialize_bus_attr - Initialize SCSI bus attributes to default values
* @ioa_cfg: ioa config struct
*
* Return value:
* none
**/
static void __devinit ipr_initialize_bus_attr(struct ipr_ioa_cfg *ioa_cfg)
{
int i;
for (i = 0; i < IPR_MAX_NUM_BUSES; i++) {
ioa_cfg->bus_attr[i].bus = i;
ioa_cfg->bus_attr[i].qas_enabled = 0;
ioa_cfg->bus_attr[i].bus_width = IPR_DEFAULT_BUS_WIDTH;
if (ipr_max_speed < ARRAY_SIZE(ipr_max_bus_speeds))
ioa_cfg->bus_attr[i].max_xfer_rate = ipr_max_bus_speeds[ipr_max_speed];
else
ioa_cfg->bus_attr[i].max_xfer_rate = IPR_U160_SCSI_RATE;
}
}
/**
* ipr_init_ioa_cfg - Initialize IOA config struct
* @ioa_cfg: ioa config struct
* @host: scsi host struct
* @pdev: PCI dev struct
*
* Return value:
* none
**/
static void __devinit ipr_init_ioa_cfg(struct ipr_ioa_cfg *ioa_cfg,
struct Scsi_Host *host, struct pci_dev *pdev)
{
const struct ipr_interrupt_offsets *p;
struct ipr_interrupts *t;
void __iomem *base;
ioa_cfg->host = host;
ioa_cfg->pdev = pdev;
ioa_cfg->log_level = ipr_log_level;
ioa_cfg->doorbell = IPR_DOORBELL;
sprintf(ioa_cfg->eye_catcher, IPR_EYECATCHER);
sprintf(ioa_cfg->trace_start, IPR_TRACE_START_LABEL);
sprintf(ioa_cfg->ipr_free_label, IPR_FREEQ_LABEL);
sprintf(ioa_cfg->ipr_pending_label, IPR_PENDQ_LABEL);
sprintf(ioa_cfg->cfg_table_start, IPR_CFG_TBL_START);
sprintf(ioa_cfg->resource_table_label, IPR_RES_TABLE_LABEL);
sprintf(ioa_cfg->ipr_hcam_label, IPR_HCAM_LABEL);
sprintf(ioa_cfg->ipr_cmd_label, IPR_CMD_LABEL);
INIT_LIST_HEAD(&ioa_cfg->free_q);
INIT_LIST_HEAD(&ioa_cfg->pending_q);
INIT_LIST_HEAD(&ioa_cfg->hostrcb_free_q);
INIT_LIST_HEAD(&ioa_cfg->hostrcb_pending_q);
INIT_LIST_HEAD(&ioa_cfg->free_res_q);
INIT_LIST_HEAD(&ioa_cfg->used_res_q);
INIT_WORK(&ioa_cfg->work_q, ipr_worker_thread);
init_waitqueue_head(&ioa_cfg->reset_wait_q);
init_waitqueue_head(&ioa_cfg->msi_wait_q);
ioa_cfg->sdt_state = INACTIVE;
ipr_initialize_bus_attr(ioa_cfg);
ioa_cfg->max_devs_supported = ipr_max_devs;
if (ioa_cfg->sis64) {
host->max_id = IPR_MAX_SIS64_TARGETS_PER_BUS;
host->max_lun = IPR_MAX_SIS64_LUNS_PER_TARGET;
if (ipr_max_devs > IPR_MAX_SIS64_DEVS)
ioa_cfg->max_devs_supported = IPR_MAX_SIS64_DEVS;
} else {
host->max_id = IPR_MAX_NUM_TARGETS_PER_BUS;
host->max_lun = IPR_MAX_NUM_LUNS_PER_TARGET;
if (ipr_max_devs > IPR_MAX_PHYSICAL_DEVS)
ioa_cfg->max_devs_supported = IPR_MAX_PHYSICAL_DEVS;
}
host->max_channel = IPR_MAX_BUS_TO_SCAN;
host->unique_id = host->host_no;
host->max_cmd_len = IPR_MAX_CDB_LEN;
pci_set_drvdata(pdev, ioa_cfg);
p = &ioa_cfg->chip_cfg->regs;
t = &ioa_cfg->regs;
base = ioa_cfg->hdw_dma_regs;
t->set_interrupt_mask_reg = base + p->set_interrupt_mask_reg;
t->clr_interrupt_mask_reg = base + p->clr_interrupt_mask_reg;
t->clr_interrupt_mask_reg32 = base + p->clr_interrupt_mask_reg32;
t->sense_interrupt_mask_reg = base + p->sense_interrupt_mask_reg;
t->sense_interrupt_mask_reg32 = base + p->sense_interrupt_mask_reg32;
t->clr_interrupt_reg = base + p->clr_interrupt_reg;
t->clr_interrupt_reg32 = base + p->clr_interrupt_reg32;
t->sense_interrupt_reg = base + p->sense_interrupt_reg;
t->sense_interrupt_reg32 = base + p->sense_interrupt_reg32;
t->ioarrin_reg = base + p->ioarrin_reg;
t->sense_uproc_interrupt_reg = base + p->sense_uproc_interrupt_reg;
t->sense_uproc_interrupt_reg32 = base + p->sense_uproc_interrupt_reg32;
t->set_uproc_interrupt_reg = base + p->set_uproc_interrupt_reg;
t->set_uproc_interrupt_reg32 = base + p->set_uproc_interrupt_reg32;
t->clr_uproc_interrupt_reg = base + p->clr_uproc_interrupt_reg;
t->clr_uproc_interrupt_reg32 = base + p->clr_uproc_interrupt_reg32;
if (ioa_cfg->sis64) {
t->init_feedback_reg = base + p->init_feedback_reg;
t->dump_addr_reg = base + p->dump_addr_reg;
t->dump_data_reg = base + p->dump_data_reg;
t->endian_swap_reg = base + p->endian_swap_reg;
}
}
/**
* ipr_get_chip_info - Find adapter chip information
* @dev_id: PCI device id struct
*
* Return value:
* ptr to chip information on success / NULL on failure
**/
static const struct ipr_chip_t * __devinit
ipr_get_chip_info(const struct pci_device_id *dev_id)
{
int i;
for (i = 0; i < ARRAY_SIZE(ipr_chip); i++)
if (ipr_chip[i].vendor == dev_id->vendor &&
ipr_chip[i].device == dev_id->device)
return &ipr_chip[i];
return NULL;
}
/**
* ipr_test_intr - Handle the interrupt generated in ipr_test_msi().
* @pdev: PCI device struct
*
* Description: Simply set the msi_received flag to 1 indicating that
* Message Signaled Interrupts are supported.
*
* Return value:
* 0 on success / non-zero on failure
**/
static irqreturn_t __devinit ipr_test_intr(int irq, void *devp)
{
struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)devp;
unsigned long lock_flags = 0;
irqreturn_t rc = IRQ_HANDLED;
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
ioa_cfg->msi_received = 1;
wake_up(&ioa_cfg->msi_wait_q);
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return rc;
}
/**
* ipr_test_msi - Test for Message Signaled Interrupt (MSI) support.
* @pdev: PCI device struct
*
* Description: The return value from pci_enable_msi() can not always be
* trusted. This routine sets up and initiates a test interrupt to determine
* if the interrupt is received via the ipr_test_intr() service routine.
* If the tests fails, the driver will fall back to LSI.
*
* Return value:
* 0 on success / non-zero on failure
**/
static int __devinit ipr_test_msi(struct ipr_ioa_cfg *ioa_cfg,
struct pci_dev *pdev)
{
int rc;
volatile u32 int_reg;
unsigned long lock_flags = 0;
ENTER;
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
init_waitqueue_head(&ioa_cfg->msi_wait_q);
ioa_cfg->msi_received = 0;
ipr_mask_and_clear_interrupts(ioa_cfg, ~IPR_PCII_IOA_TRANS_TO_OPER);
writel(IPR_PCII_IO_DEBUG_ACKNOWLEDGE, ioa_cfg->regs.clr_interrupt_mask_reg32);
int_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg);
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
rc = request_irq(pdev->irq, ipr_test_intr, 0, IPR_NAME, ioa_cfg);
if (rc) {
dev_err(&pdev->dev, "Can not assign irq %d\n", pdev->irq);
return rc;
} else if (ipr_debug)
dev_info(&pdev->dev, "IRQ assigned: %d\n", pdev->irq);
writel(IPR_PCII_IO_DEBUG_ACKNOWLEDGE, ioa_cfg->regs.sense_interrupt_reg32);
int_reg = readl(ioa_cfg->regs.sense_interrupt_reg);
wait_event_timeout(ioa_cfg->msi_wait_q, ioa_cfg->msi_received, HZ);
ipr_mask_and_clear_interrupts(ioa_cfg, ~IPR_PCII_IOA_TRANS_TO_OPER);
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
if (!ioa_cfg->msi_received) {
/* MSI test failed */
dev_info(&pdev->dev, "MSI test failed. Falling back to LSI.\n");
rc = -EOPNOTSUPP;
} else if (ipr_debug)
dev_info(&pdev->dev, "MSI test succeeded.\n");
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
free_irq(pdev->irq, ioa_cfg);
LEAVE;
return rc;
}
/**
* ipr_probe_ioa - Allocates memory and does first stage of initialization
* @pdev: PCI device struct
* @dev_id: PCI device id struct
*
* Return value:
* 0 on success / non-zero on failure
**/
static int __devinit ipr_probe_ioa(struct pci_dev *pdev,
const struct pci_device_id *dev_id)
{
struct ipr_ioa_cfg *ioa_cfg;
struct Scsi_Host *host;
unsigned long ipr_regs_pci;
void __iomem *ipr_regs;
int rc = PCIBIOS_SUCCESSFUL;
volatile u32 mask, uproc, interrupts;
ENTER;
if ((rc = pci_enable_device(pdev))) {
dev_err(&pdev->dev, "Cannot enable adapter\n");
goto out;
}
dev_info(&pdev->dev, "Found IOA with IRQ: %d\n", pdev->irq);
host = scsi_host_alloc(&driver_template, sizeof(*ioa_cfg));
if (!host) {
dev_err(&pdev->dev, "call to scsi_host_alloc failed!\n");
rc = -ENOMEM;
goto out_disable;
}
ioa_cfg = (struct ipr_ioa_cfg *)host->hostdata;
memset(ioa_cfg, 0, sizeof(struct ipr_ioa_cfg));
ata_host_init(&ioa_cfg->ata_host, &pdev->dev,
sata_port_info.flags, &ipr_sata_ops);
ioa_cfg->ipr_chip = ipr_get_chip_info(dev_id);
if (!ioa_cfg->ipr_chip) {
dev_err(&pdev->dev, "Unknown adapter chipset 0x%04X 0x%04X\n",
dev_id->vendor, dev_id->device);
goto out_scsi_host_put;
}
/* set SIS 32 or SIS 64 */
ioa_cfg->sis64 = ioa_cfg->ipr_chip->sis_type == IPR_SIS64 ? 1 : 0;
ioa_cfg->chip_cfg = ioa_cfg->ipr_chip->cfg;
if (ipr_transop_timeout)
ioa_cfg->transop_timeout = ipr_transop_timeout;
else if (dev_id->driver_data & IPR_USE_LONG_TRANSOP_TIMEOUT)
ioa_cfg->transop_timeout = IPR_LONG_OPERATIONAL_TIMEOUT;
else
ioa_cfg->transop_timeout = IPR_OPERATIONAL_TIMEOUT;
ioa_cfg->revid = pdev->revision;
ipr_regs_pci = pci_resource_start(pdev, 0);
rc = pci_request_regions(pdev, IPR_NAME);
if (rc < 0) {
dev_err(&pdev->dev,
"Couldn't register memory range of registers\n");
goto out_scsi_host_put;
}
ipr_regs = pci_ioremap_bar(pdev, 0);
if (!ipr_regs) {
dev_err(&pdev->dev,
"Couldn't map memory range of registers\n");
rc = -ENOMEM;
goto out_release_regions;
}
ioa_cfg->hdw_dma_regs = ipr_regs;
ioa_cfg->hdw_dma_regs_pci = ipr_regs_pci;
ioa_cfg->ioa_mailbox = ioa_cfg->chip_cfg->mailbox + ipr_regs;
ipr_init_ioa_cfg(ioa_cfg, host, pdev);
pci_set_master(pdev);
if (ioa_cfg->sis64) {
rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
if (rc < 0) {
dev_dbg(&pdev->dev, "Failed to set 64 bit PCI DMA mask\n");
rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
}
} else
rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc < 0) {
dev_err(&pdev->dev, "Failed to set PCI DMA mask\n");
goto cleanup_nomem;
}
rc = pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE,
ioa_cfg->chip_cfg->cache_line_size);
if (rc != PCIBIOS_SUCCESSFUL) {
dev_err(&pdev->dev, "Write of cache line size failed\n");
rc = -EIO;
goto cleanup_nomem;
}
/* Enable MSI style interrupts if they are supported. */
if (ioa_cfg->ipr_chip->intr_type == IPR_USE_MSI && !pci_enable_msi(pdev)) {
rc = ipr_test_msi(ioa_cfg, pdev);
if (rc == -EOPNOTSUPP)
pci_disable_msi(pdev);
else if (rc)
goto out_msi_disable;
else
dev_info(&pdev->dev, "MSI enabled with IRQ: %d\n", pdev->irq);
} else if (ipr_debug)
dev_info(&pdev->dev, "Cannot enable MSI.\n");
/* Save away PCI config space for use following IOA reset */
rc = pci_save_state(pdev);
if (rc != PCIBIOS_SUCCESSFUL) {
dev_err(&pdev->dev, "Failed to save PCI config space\n");
rc = -EIO;
goto cleanup_nomem;
}
if ((rc = ipr_save_pcix_cmd_reg(ioa_cfg)))
goto cleanup_nomem;
if ((rc = ipr_set_pcix_cmd_reg(ioa_cfg)))
goto cleanup_nomem;
if (ioa_cfg->sis64)
ioa_cfg->cfg_table_size = (sizeof(struct ipr_config_table_hdr64)
+ ((sizeof(struct ipr_config_table_entry64)
* ioa_cfg->max_devs_supported)));
else
ioa_cfg->cfg_table_size = (sizeof(struct ipr_config_table_hdr)
+ ((sizeof(struct ipr_config_table_entry)
* ioa_cfg->max_devs_supported)));
rc = ipr_alloc_mem(ioa_cfg);
if (rc < 0) {
dev_err(&pdev->dev,
"Couldn't allocate enough memory for device driver!\n");
goto cleanup_nomem;
}
/*
* If HRRQ updated interrupt is not masked, or reset alert is set,
* the card is in an unknown state and needs a hard reset
*/
mask = readl(ioa_cfg->regs.sense_interrupt_mask_reg32);
interrupts = readl(ioa_cfg->regs.sense_interrupt_reg32);
uproc = readl(ioa_cfg->regs.sense_uproc_interrupt_reg32);
if ((mask & IPR_PCII_HRRQ_UPDATED) == 0 || (uproc & IPR_UPROCI_RESET_ALERT))
ioa_cfg->needs_hard_reset = 1;
if (interrupts & IPR_PCII_ERROR_INTERRUPTS)
ioa_cfg->needs_hard_reset = 1;
if (interrupts & IPR_PCII_IOA_UNIT_CHECKED)
ioa_cfg->ioa_unit_checked = 1;
ipr_mask_and_clear_interrupts(ioa_cfg, ~IPR_PCII_IOA_TRANS_TO_OPER);
rc = request_irq(pdev->irq, ipr_isr,
ioa_cfg->msi_received ? 0 : IRQF_SHARED,
IPR_NAME, ioa_cfg);
if (rc) {
dev_err(&pdev->dev, "Couldn't register IRQ %d! rc=%d\n",
pdev->irq, rc);
goto cleanup_nolog;
}
if ((dev_id->driver_data & IPR_USE_PCI_WARM_RESET) ||
(dev_id->device == PCI_DEVICE_ID_IBM_OBSIDIAN_E && !ioa_cfg->revid)) {
ioa_cfg->needs_warm_reset = 1;
ioa_cfg->reset = ipr_reset_slot_reset;
} else
ioa_cfg->reset = ipr_reset_start_bist;
spin_lock(&ipr_driver_lock);
list_add_tail(&ioa_cfg->queue, &ipr_ioa_head);
spin_unlock(&ipr_driver_lock);
LEAVE;
out:
return rc;
cleanup_nolog:
ipr_free_mem(ioa_cfg);
cleanup_nomem:
iounmap(ipr_regs);
out_msi_disable:
pci_disable_msi(pdev);
out_release_regions:
pci_release_regions(pdev);
out_scsi_host_put:
scsi_host_put(host);
out_disable:
pci_disable_device(pdev);
goto out;
}
/**
* ipr_scan_vsets - Scans for VSET devices
* @ioa_cfg: ioa config struct
*
* Description: Since the VSET resources do not follow SAM in that we can have
* sparse LUNs with no LUN 0, we have to scan for these ourselves.
*
* Return value:
* none
**/
static void ipr_scan_vsets(struct ipr_ioa_cfg *ioa_cfg)
{
int target, lun;
for (target = 0; target < IPR_MAX_NUM_TARGETS_PER_BUS; target++)
for (lun = 0; lun < IPR_MAX_NUM_VSET_LUNS_PER_TARGET; lun++ )
scsi_add_device(ioa_cfg->host, IPR_VSET_BUS, target, lun);
}
/**
* ipr_initiate_ioa_bringdown - Bring down an adapter
* @ioa_cfg: ioa config struct
* @shutdown_type: shutdown type
*
* Description: This function will initiate bringing down the adapter.
* This consists of issuing an IOA shutdown to the adapter
* to flush the cache, and running BIST.
* If the caller needs to wait on the completion of the reset,
* the caller must sleep on the reset_wait_q.
*
* Return value:
* none
**/
static void ipr_initiate_ioa_bringdown(struct ipr_ioa_cfg *ioa_cfg,
enum ipr_shutdown_type shutdown_type)
{
ENTER;
if (ioa_cfg->sdt_state == WAIT_FOR_DUMP)
ioa_cfg->sdt_state = ABORT_DUMP;
ioa_cfg->reset_retries = 0;
ioa_cfg->in_ioa_bringdown = 1;
ipr_initiate_ioa_reset(ioa_cfg, shutdown_type);
LEAVE;
}
/**
* __ipr_remove - Remove a single adapter
* @pdev: pci device struct
*
* Adapter hot plug remove entry point.
*
* Return value:
* none
**/
static void __ipr_remove(struct pci_dev *pdev)
{
unsigned long host_lock_flags = 0;
struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(pdev);
ENTER;
spin_lock_irqsave(ioa_cfg->host->host_lock, host_lock_flags);
while(ioa_cfg->in_reset_reload) {
spin_unlock_irqrestore(ioa_cfg->host->host_lock, host_lock_flags);
wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
spin_lock_irqsave(ioa_cfg->host->host_lock, host_lock_flags);
}
ipr_initiate_ioa_bringdown(ioa_cfg, IPR_SHUTDOWN_NORMAL);
spin_unlock_irqrestore(ioa_cfg->host->host_lock, host_lock_flags);
wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
flush_scheduled_work();
spin_lock_irqsave(ioa_cfg->host->host_lock, host_lock_flags);
spin_lock(&ipr_driver_lock);
list_del(&ioa_cfg->queue);
spin_unlock(&ipr_driver_lock);
if (ioa_cfg->sdt_state == ABORT_DUMP)
ioa_cfg->sdt_state = WAIT_FOR_DUMP;
spin_unlock_irqrestore(ioa_cfg->host->host_lock, host_lock_flags);
ipr_free_all_resources(ioa_cfg);
LEAVE;
}
/**
* ipr_remove - IOA hot plug remove entry point
* @pdev: pci device struct
*
* Adapter hot plug remove entry point.
*
* Return value:
* none
**/
static void __devexit ipr_remove(struct pci_dev *pdev)
{
struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(pdev);
ENTER;
ipr_remove_trace_file(&ioa_cfg->host->shost_dev.kobj,
&ipr_trace_attr);
ipr_remove_dump_file(&ioa_cfg->host->shost_dev.kobj,
&ipr_dump_attr);
scsi_remove_host(ioa_cfg->host);
__ipr_remove(pdev);
LEAVE;
}
/**
* ipr_probe - Adapter hot plug add entry point
*
* Return value:
* 0 on success / non-zero on failure
**/
static int __devinit ipr_probe(struct pci_dev *pdev,
const struct pci_device_id *dev_id)
{
struct ipr_ioa_cfg *ioa_cfg;
int rc;
rc = ipr_probe_ioa(pdev, dev_id);
if (rc)
return rc;
ioa_cfg = pci_get_drvdata(pdev);
rc = ipr_probe_ioa_part2(ioa_cfg);
if (rc) {
__ipr_remove(pdev);
return rc;
}
rc = scsi_add_host(ioa_cfg->host, &pdev->dev);
if (rc) {
__ipr_remove(pdev);
return rc;
}
rc = ipr_create_trace_file(&ioa_cfg->host->shost_dev.kobj,
&ipr_trace_attr);
if (rc) {
scsi_remove_host(ioa_cfg->host);
__ipr_remove(pdev);
return rc;
}
rc = ipr_create_dump_file(&ioa_cfg->host->shost_dev.kobj,
&ipr_dump_attr);
if (rc) {
ipr_remove_trace_file(&ioa_cfg->host->shost_dev.kobj,
&ipr_trace_attr);
scsi_remove_host(ioa_cfg->host);
__ipr_remove(pdev);
return rc;
}
scsi_scan_host(ioa_cfg->host);
ipr_scan_vsets(ioa_cfg);
scsi_add_device(ioa_cfg->host, IPR_IOA_BUS, IPR_IOA_TARGET, IPR_IOA_LUN);
ioa_cfg->allow_ml_add_del = 1;
ioa_cfg->host->max_channel = IPR_VSET_BUS;
schedule_work(&ioa_cfg->work_q);
return 0;
}
/**
* ipr_shutdown - Shutdown handler.
* @pdev: pci device struct
*
* This function is invoked upon system shutdown/reboot. It will issue
* an adapter shutdown to the adapter to flush the write cache.
*
* Return value:
* none
**/
static void ipr_shutdown(struct pci_dev *pdev)
{
struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(pdev);
unsigned long lock_flags = 0;
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
while(ioa_cfg->in_reset_reload) {
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
}
ipr_initiate_ioa_bringdown(ioa_cfg, IPR_SHUTDOWN_NORMAL);
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
}
static struct pci_device_id ipr_pci_table[] __devinitdata = {
{ PCI_VENDOR_ID_MYLEX, PCI_DEVICE_ID_IBM_GEMSTONE,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_5702, 0, 0, 0 },
{ PCI_VENDOR_ID_MYLEX, PCI_DEVICE_ID_IBM_GEMSTONE,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_5703, 0, 0, 0 },
{ PCI_VENDOR_ID_MYLEX, PCI_DEVICE_ID_IBM_GEMSTONE,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_573D, 0, 0, 0 },
{ PCI_VENDOR_ID_MYLEX, PCI_DEVICE_ID_IBM_GEMSTONE,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_573E, 0, 0, 0 },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_571B, 0, 0, 0 },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572E, 0, 0, 0 },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_571A, 0, 0, 0 },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_575B, 0, 0,
IPR_USE_LONG_TRANSOP_TIMEOUT },
{ PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_OBSIDIAN,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572A, 0, 0, 0 },
{ PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_OBSIDIAN,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572B, 0, 0,
IPR_USE_LONG_TRANSOP_TIMEOUT },
{ PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_OBSIDIAN,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_575C, 0, 0,
IPR_USE_LONG_TRANSOP_TIMEOUT },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572A, 0, 0, 0 },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572B, 0, 0,
IPR_USE_LONG_TRANSOP_TIMEOUT},
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_575C, 0, 0,
IPR_USE_LONG_TRANSOP_TIMEOUT },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN_E,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_574E, 0, 0,
IPR_USE_LONG_TRANSOP_TIMEOUT },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN_E,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57B3, 0, 0, 0 },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN_E,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57CC, 0, 0, 0 },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN_E,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57B7, 0, 0,
IPR_USE_LONG_TRANSOP_TIMEOUT | IPR_USE_PCI_WARM_RESET },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_SNIPE,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_2780, 0, 0, 0 },
{ PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_SCAMP,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_571E, 0, 0, 0 },
{ PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_SCAMP,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_571F, 0, 0,
IPR_USE_LONG_TRANSOP_TIMEOUT },
{ PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_SCAMP,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572F, 0, 0,
IPR_USE_LONG_TRANSOP_TIMEOUT },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_FPGA_E2,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57B5, 0, 0, 0 },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_FPGA_E2,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_574D, 0, 0, 0 },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_FPGA_E2,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57B2, 0, 0, 0 },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_ASIC_E2,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57B4, 0, 0, 0 },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_ASIC_E2,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57B1, 0, 0, 0 },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_ASIC_E2,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57C6, 0, 0, 0 },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_ASIC_E2,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_575D, 0, 0, 0 },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_ASIC_E2,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57CE, 0, 0, 0 },
{ }
};
MODULE_DEVICE_TABLE(pci, ipr_pci_table);
static struct pci_error_handlers ipr_err_handler = {
.error_detected = ipr_pci_error_detected,
.slot_reset = ipr_pci_slot_reset,
};
static struct pci_driver ipr_driver = {
.name = IPR_NAME,
.id_table = ipr_pci_table,
.probe = ipr_probe,
.remove = __devexit_p(ipr_remove),
.shutdown = ipr_shutdown,
.err_handler = &ipr_err_handler,
};
/**
* ipr_halt_done - Shutdown prepare completion
*
* Return value:
* none
**/
static void ipr_halt_done(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
}
/**
* ipr_halt - Issue shutdown prepare to all adapters
*
* Return value:
* NOTIFY_OK on success / NOTIFY_DONE on failure
**/
static int ipr_halt(struct notifier_block *nb, ulong event, void *buf)
{
struct ipr_cmnd *ipr_cmd;
struct ipr_ioa_cfg *ioa_cfg;
unsigned long flags = 0;
if (event != SYS_RESTART && event != SYS_HALT && event != SYS_POWER_OFF)
return NOTIFY_DONE;
spin_lock(&ipr_driver_lock);
list_for_each_entry(ioa_cfg, &ipr_ioa_head, queue) {
spin_lock_irqsave(ioa_cfg->host->host_lock, flags);
if (!ioa_cfg->allow_cmds) {
spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags);
continue;
}
ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg);
ipr_cmd->ioarcb.res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE);
ipr_cmd->ioarcb.cmd_pkt.request_type = IPR_RQTYPE_IOACMD;
ipr_cmd->ioarcb.cmd_pkt.cdb[0] = IPR_IOA_SHUTDOWN;
ipr_cmd->ioarcb.cmd_pkt.cdb[1] = IPR_SHUTDOWN_PREPARE_FOR_NORMAL;
ipr_do_req(ipr_cmd, ipr_halt_done, ipr_timeout, IPR_DEVICE_RESET_TIMEOUT);
spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags);
}
spin_unlock(&ipr_driver_lock);
return NOTIFY_OK;
}
static struct notifier_block ipr_notifier = {
ipr_halt, NULL, 0
};
/**
* ipr_init - Module entry point
*
* Return value:
* 0 on success / negative value on failure
**/
static int __init ipr_init(void)
{
ipr_info("IBM Power RAID SCSI Device Driver version: %s %s\n",
IPR_DRIVER_VERSION, IPR_DRIVER_DATE);
register_reboot_notifier(&ipr_notifier);
return pci_register_driver(&ipr_driver);
}
/**
* ipr_exit - Module unload
*
* Module unload entry point.
*
* Return value:
* none
**/
static void __exit ipr_exit(void)
{
unregister_reboot_notifier(&ipr_notifier);
pci_unregister_driver(&ipr_driver);
}
module_init(ipr_init);
module_exit(ipr_exit);