linux/fs/gfs2/glock.c

2061 lines
51 KiB
C
Raw Normal View History

/*
* Copyright (C) Sistina Software, Inc. 1997-2003 All rights reserved.
* Copyright (C) 2004-2008 Red Hat, Inc. All rights reserved.
*
* This copyrighted material is made available to anyone wishing to use,
* modify, copy, or redistribute it subject to the terms and conditions
* of the GNU General Public License version 2.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/buffer_head.h>
#include <linux/delay.h>
#include <linux/sort.h>
#include <linux/jhash.h>
#include <linux/kallsyms.h>
#include <linux/gfs2_ondisk.h>
#include <linux/list.h>
#include <linux/wait.h>
#include <linux/module.h>
#include <linux/uaccess.h>
#include <linux/seq_file.h>
#include <linux/debugfs.h>
#include <linux/kthread.h>
#include <linux/freezer.h>
#include <linux/workqueue.h>
#include <linux/jiffies.h>
#include <linux/rcupdate.h>
#include <linux/rculist_bl.h>
#include <linux/bit_spinlock.h>
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 11:38:36 +01:00
#include <linux/percpu.h>
#include <linux/list_sort.h>
#include <linux/lockref.h>
#include <linux/rhashtable.h>
#include "gfs2.h"
#include "incore.h"
#include "glock.h"
#include "glops.h"
#include "inode.h"
#include "lops.h"
#include "meta_io.h"
#include "quota.h"
#include "super.h"
#include "util.h"
#include "bmap.h"
#define CREATE_TRACE_POINTS
#include "trace_gfs2.h"
struct gfs2_glock_iter {
struct gfs2_sbd *sdp; /* incore superblock */
struct rhashtable_iter hti; /* rhashtable iterator */
struct gfs2_glock *gl; /* current glock struct */
loff_t last_pos; /* last position */
};
typedef void (*glock_examiner) (struct gfs2_glock * gl);
static void do_xmote(struct gfs2_glock *gl, struct gfs2_holder *gh, unsigned int target);
static struct dentry *gfs2_root;
static struct workqueue_struct *glock_workqueue;
struct workqueue_struct *gfs2_delete_workqueue;
static LIST_HEAD(lru_list);
static atomic_t lru_count = ATOMIC_INIT(0);
static DEFINE_SPINLOCK(lru_lock);
#define GFS2_GL_HASH_SHIFT 15
#define GFS2_GL_HASH_SIZE BIT(GFS2_GL_HASH_SHIFT)
static struct rhashtable_params ht_parms = {
.nelem_hint = GFS2_GL_HASH_SIZE * 3 / 4,
.key_len = sizeof(struct lm_lockname),
.key_offset = offsetof(struct gfs2_glock, gl_name),
.head_offset = offsetof(struct gfs2_glock, gl_node),
};
static struct rhashtable gl_hash_table;
void gfs2_glock_free(struct gfs2_glock *gl)
{
struct gfs2_sbd *sdp = gl->gl_name.ln_sbd;
if (gl->gl_ops->go_flags & GLOF_ASPACE) {
kmem_cache_free(gfs2_glock_aspace_cachep, gl);
} else {
kfree(gl->gl_lksb.sb_lvbptr);
kmem_cache_free(gfs2_glock_cachep, gl);
}
if (atomic_dec_and_test(&sdp->sd_glock_disposal))
wake_up(&sdp->sd_glock_wait);
}
/**
* gfs2_glock_hold() - increment reference count on glock
* @gl: The glock to hold
*
*/
static void gfs2_glock_hold(struct gfs2_glock *gl)
{
GLOCK_BUG_ON(gl, __lockref_is_dead(&gl->gl_lockref));
lockref_get(&gl->gl_lockref);
}
/**
* demote_ok - Check to see if it's ok to unlock a glock
* @gl: the glock
*
* Returns: 1 if it's ok
*/
static int demote_ok(const struct gfs2_glock *gl)
{
const struct gfs2_glock_operations *glops = gl->gl_ops;
if (gl->gl_state == LM_ST_UNLOCKED)
return 0;
if (!list_empty(&gl->gl_holders))
return 0;
if (glops->go_demote_ok)
return glops->go_demote_ok(gl);
return 1;
}
void gfs2_glock_add_to_lru(struct gfs2_glock *gl)
{
spin_lock(&lru_lock);
if (!list_empty(&gl->gl_lru))
list_del_init(&gl->gl_lru);
else
atomic_inc(&lru_count);
list_add_tail(&gl->gl_lru, &lru_list);
set_bit(GLF_LRU, &gl->gl_flags);
spin_unlock(&lru_lock);
}
static void gfs2_glock_remove_from_lru(struct gfs2_glock *gl)
{
spin_lock(&lru_lock);
if (!list_empty(&gl->gl_lru)) {
list_del_init(&gl->gl_lru);
atomic_dec(&lru_count);
clear_bit(GLF_LRU, &gl->gl_flags);
}
spin_unlock(&lru_lock);
}
/**
* gfs2_glock_put() - Decrement reference count on glock
* @gl: The glock to put
*
*/
void gfs2_glock_put(struct gfs2_glock *gl)
{
struct gfs2_sbd *sdp = gl->gl_name.ln_sbd;
struct address_space *mapping = gfs2_glock2aspace(gl);
if (lockref_put_or_lock(&gl->gl_lockref))
return;
lockref_mark_dead(&gl->gl_lockref);
gfs2_glock_remove_from_lru(gl);
spin_unlock(&gl->gl_lockref.lock);
rhashtable_remove_fast(&gl_hash_table, &gl->gl_node, ht_parms);
GLOCK_BUG_ON(gl, !list_empty(&gl->gl_holders));
GLOCK_BUG_ON(gl, mapping && mapping->nrpages);
trace_gfs2_glock_put(gl);
sdp->sd_lockstruct.ls_ops->lm_put_lock(gl);
}
/**
* may_grant - check if its ok to grant a new lock
* @gl: The glock
* @gh: The lock request which we wish to grant
*
* Returns: true if its ok to grant the lock
*/
static inline int may_grant(const struct gfs2_glock *gl, const struct gfs2_holder *gh)
{
const struct gfs2_holder *gh_head = list_entry(gl->gl_holders.next, const struct gfs2_holder, gh_list);
if ((gh->gh_state == LM_ST_EXCLUSIVE ||
gh_head->gh_state == LM_ST_EXCLUSIVE) && gh != gh_head)
return 0;
if (gl->gl_state == gh->gh_state)
return 1;
if (gh->gh_flags & GL_EXACT)
return 0;
if (gl->gl_state == LM_ST_EXCLUSIVE) {
if (gh->gh_state == LM_ST_SHARED && gh_head->gh_state == LM_ST_SHARED)
return 1;
if (gh->gh_state == LM_ST_DEFERRED && gh_head->gh_state == LM_ST_DEFERRED)
return 1;
}
if (gl->gl_state != LM_ST_UNLOCKED && (gh->gh_flags & LM_FLAG_ANY))
return 1;
return 0;
}
static void gfs2_holder_wake(struct gfs2_holder *gh)
{
clear_bit(HIF_WAIT, &gh->gh_iflags);
smp_mb__after_atomic();
wake_up_bit(&gh->gh_iflags, HIF_WAIT);
}
/**
* do_error - Something unexpected has happened during a lock request
*
*/
static void do_error(struct gfs2_glock *gl, const int ret)
{
struct gfs2_holder *gh, *tmp;
list_for_each_entry_safe(gh, tmp, &gl->gl_holders, gh_list) {
if (test_bit(HIF_HOLDER, &gh->gh_iflags))
continue;
if (ret & LM_OUT_ERROR)
gh->gh_error = -EIO;
else if (gh->gh_flags & (LM_FLAG_TRY | LM_FLAG_TRY_1CB))
gh->gh_error = GLR_TRYFAILED;
else
continue;
list_del_init(&gh->gh_list);
trace_gfs2_glock_queue(gh, 0);
gfs2_holder_wake(gh);
}
}
/**
* do_promote - promote as many requests as possible on the current queue
* @gl: The glock
*
* Returns: 1 if there is a blocked holder at the head of the list, or 2
* if a type specific operation is underway.
*/
static int do_promote(struct gfs2_glock *gl)
__releases(&gl->gl_lockref.lock)
__acquires(&gl->gl_lockref.lock)
{
const struct gfs2_glock_operations *glops = gl->gl_ops;
struct gfs2_holder *gh, *tmp;
int ret;
restart:
list_for_each_entry_safe(gh, tmp, &gl->gl_holders, gh_list) {
if (test_bit(HIF_HOLDER, &gh->gh_iflags))
continue;
if (may_grant(gl, gh)) {
if (gh->gh_list.prev == &gl->gl_holders &&
glops->go_lock) {
spin_unlock(&gl->gl_lockref.lock);
/* FIXME: eliminate this eventually */
ret = glops->go_lock(gh);
spin_lock(&gl->gl_lockref.lock);
if (ret) {
if (ret == 1)
return 2;
gh->gh_error = ret;
list_del_init(&gh->gh_list);
trace_gfs2_glock_queue(gh, 0);
gfs2_holder_wake(gh);
goto restart;
}
set_bit(HIF_HOLDER, &gh->gh_iflags);
trace_gfs2_promote(gh, 1);
gfs2_holder_wake(gh);
goto restart;
}
set_bit(HIF_HOLDER, &gh->gh_iflags);
trace_gfs2_promote(gh, 0);
gfs2_holder_wake(gh);
continue;
}
if (gh->gh_list.prev == &gl->gl_holders)
return 1;
do_error(gl, 0);
break;
}
return 0;
}
/**
* find_first_waiter - find the first gh that's waiting for the glock
* @gl: the glock
*/
static inline struct gfs2_holder *find_first_waiter(const struct gfs2_glock *gl)
{
struct gfs2_holder *gh;
list_for_each_entry(gh, &gl->gl_holders, gh_list) {
if (!test_bit(HIF_HOLDER, &gh->gh_iflags))
return gh;
}
return NULL;
}
/**
* state_change - record that the glock is now in a different state
* @gl: the glock
* @new_state the new state
*
*/
static void state_change(struct gfs2_glock *gl, unsigned int new_state)
{
int held1, held2;
held1 = (gl->gl_state != LM_ST_UNLOCKED);
held2 = (new_state != LM_ST_UNLOCKED);
if (held1 != held2) {
GLOCK_BUG_ON(gl, __lockref_is_dead(&gl->gl_lockref));
if (held2)
gl->gl_lockref.count++;
else
gl->gl_lockref.count--;
}
if (held1 && held2 && list_empty(&gl->gl_holders))
clear_bit(GLF_QUEUED, &gl->gl_flags);
if (new_state != gl->gl_target)
/* shorten our minimum hold time */
gl->gl_hold_time = max(gl->gl_hold_time - GL_GLOCK_HOLD_DECR,
GL_GLOCK_MIN_HOLD);
gl->gl_state = new_state;
gl->gl_tchange = jiffies;
}
static void gfs2_demote_wake(struct gfs2_glock *gl)
{
gl->gl_demote_state = LM_ST_EXCLUSIVE;
clear_bit(GLF_DEMOTE, &gl->gl_flags);
smp_mb__after_atomic();
wake_up_bit(&gl->gl_flags, GLF_DEMOTE);
}
/**
* finish_xmote - The DLM has replied to one of our lock requests
* @gl: The glock
* @ret: The status from the DLM
*
*/
static void finish_xmote(struct gfs2_glock *gl, unsigned int ret)
{
const struct gfs2_glock_operations *glops = gl->gl_ops;
struct gfs2_holder *gh;
unsigned state = ret & LM_OUT_ST_MASK;
int rv;
spin_lock(&gl->gl_lockref.lock);
trace_gfs2_glock_state_change(gl, state);
state_change(gl, state);
gh = find_first_waiter(gl);
/* Demote to UN request arrived during demote to SH or DF */
if (test_bit(GLF_DEMOTE_IN_PROGRESS, &gl->gl_flags) &&
state != LM_ST_UNLOCKED && gl->gl_demote_state == LM_ST_UNLOCKED)
gl->gl_target = LM_ST_UNLOCKED;
/* Check for state != intended state */
if (unlikely(state != gl->gl_target)) {
if (gh && !test_bit(GLF_DEMOTE_IN_PROGRESS, &gl->gl_flags)) {
/* move to back of queue and try next entry */
if (ret & LM_OUT_CANCELED) {
if ((gh->gh_flags & LM_FLAG_PRIORITY) == 0)
list_move_tail(&gh->gh_list, &gl->gl_holders);
gh = find_first_waiter(gl);
gl->gl_target = gh->gh_state;
goto retry;
}
/* Some error or failed "try lock" - report it */
if ((ret & LM_OUT_ERROR) ||
(gh->gh_flags & (LM_FLAG_TRY | LM_FLAG_TRY_1CB))) {
gl->gl_target = gl->gl_state;
do_error(gl, ret);
goto out;
}
}
switch(state) {
/* Unlocked due to conversion deadlock, try again */
case LM_ST_UNLOCKED:
retry:
do_xmote(gl, gh, gl->gl_target);
break;
/* Conversion fails, unlock and try again */
case LM_ST_SHARED:
case LM_ST_DEFERRED:
do_xmote(gl, gh, LM_ST_UNLOCKED);
break;
default: /* Everything else */
pr_err("wanted %u got %u\n", gl->gl_target, state);
GLOCK_BUG_ON(gl, 1);
}
spin_unlock(&gl->gl_lockref.lock);
return;
}
/* Fast path - we got what we asked for */
if (test_and_clear_bit(GLF_DEMOTE_IN_PROGRESS, &gl->gl_flags))
gfs2_demote_wake(gl);
if (state != LM_ST_UNLOCKED) {
if (glops->go_xmote_bh) {
spin_unlock(&gl->gl_lockref.lock);
rv = glops->go_xmote_bh(gl, gh);
spin_lock(&gl->gl_lockref.lock);
if (rv) {
do_error(gl, rv);
goto out;
}
}
rv = do_promote(gl);
if (rv == 2)
goto out_locked;
}
out:
clear_bit(GLF_LOCK, &gl->gl_flags);
out_locked:
spin_unlock(&gl->gl_lockref.lock);
}
/**
* do_xmote - Calls the DLM to change the state of a lock
* @gl: The lock state
* @gh: The holder (only for promotes)
* @target: The target lock state
*
*/
static void do_xmote(struct gfs2_glock *gl, struct gfs2_holder *gh, unsigned int target)
__releases(&gl->gl_lockref.lock)
__acquires(&gl->gl_lockref.lock)
{
const struct gfs2_glock_operations *glops = gl->gl_ops;
struct gfs2_sbd *sdp = gl->gl_name.ln_sbd;
unsigned int lck_flags = (unsigned int)(gh ? gh->gh_flags : 0);
int ret;
lck_flags &= (LM_FLAG_TRY | LM_FLAG_TRY_1CB | LM_FLAG_NOEXP |
LM_FLAG_PRIORITY);
GLOCK_BUG_ON(gl, gl->gl_state == target);
GLOCK_BUG_ON(gl, gl->gl_state == gl->gl_target);
if ((target == LM_ST_UNLOCKED || target == LM_ST_DEFERRED) &&
glops->go_inval) {
set_bit(GLF_INVALIDATE_IN_PROGRESS, &gl->gl_flags);
do_error(gl, 0); /* Fail queued try locks */
}
gl->gl_req = target;
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 11:38:36 +01:00
set_bit(GLF_BLOCKING, &gl->gl_flags);
if ((gl->gl_req == LM_ST_UNLOCKED) ||
(gl->gl_state == LM_ST_EXCLUSIVE) ||
(lck_flags & (LM_FLAG_TRY|LM_FLAG_TRY_1CB)))
clear_bit(GLF_BLOCKING, &gl->gl_flags);
spin_unlock(&gl->gl_lockref.lock);
if (glops->go_sync)
glops->go_sync(gl);
if (test_bit(GLF_INVALIDATE_IN_PROGRESS, &gl->gl_flags))
glops->go_inval(gl, target == LM_ST_DEFERRED ? 0 : DIO_METADATA);
clear_bit(GLF_INVALIDATE_IN_PROGRESS, &gl->gl_flags);
gfs2_glock_hold(gl);
if (sdp->sd_lockstruct.ls_ops->lm_lock) {
/* lock_dlm */
ret = sdp->sd_lockstruct.ls_ops->lm_lock(gl, target, lck_flags);
if (ret == -EINVAL && gl->gl_target == LM_ST_UNLOCKED &&
target == LM_ST_UNLOCKED &&
test_bit(SDF_SKIP_DLM_UNLOCK, &sdp->sd_flags)) {
finish_xmote(gl, target);
if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
gfs2_glock_put(gl);
}
else if (ret) {
pr_err("lm_lock ret %d\n", ret);
GLOCK_BUG_ON(gl, 1);
}
} else { /* lock_nolock */
finish_xmote(gl, target);
if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
gfs2_glock_put(gl);
}
spin_lock(&gl->gl_lockref.lock);
}
/**
* find_first_holder - find the first "holder" gh
* @gl: the glock
*/
static inline struct gfs2_holder *find_first_holder(const struct gfs2_glock *gl)
{
struct gfs2_holder *gh;
if (!list_empty(&gl->gl_holders)) {
gh = list_entry(gl->gl_holders.next, struct gfs2_holder, gh_list);
if (test_bit(HIF_HOLDER, &gh->gh_iflags))
return gh;
}
return NULL;
}
/**
* run_queue - do all outstanding tasks related to a glock
* @gl: The glock in question
* @nonblock: True if we must not block in run_queue
*
*/
static void run_queue(struct gfs2_glock *gl, const int nonblock)
__releases(&gl->gl_lockref.lock)
__acquires(&gl->gl_lockref.lock)
{
struct gfs2_holder *gh = NULL;
int ret;
if (test_and_set_bit(GLF_LOCK, &gl->gl_flags))
return;
GLOCK_BUG_ON(gl, test_bit(GLF_DEMOTE_IN_PROGRESS, &gl->gl_flags));
if (test_bit(GLF_DEMOTE, &gl->gl_flags) &&
gl->gl_demote_state != gl->gl_state) {
if (find_first_holder(gl))
goto out_unlock;
if (nonblock)
goto out_sched;
set_bit(GLF_DEMOTE_IN_PROGRESS, &gl->gl_flags);
GLOCK_BUG_ON(gl, gl->gl_demote_state == LM_ST_EXCLUSIVE);
gl->gl_target = gl->gl_demote_state;
} else {
if (test_bit(GLF_DEMOTE, &gl->gl_flags))
gfs2_demote_wake(gl);
ret = do_promote(gl);
if (ret == 0)
goto out_unlock;
if (ret == 2)
goto out;
gh = find_first_waiter(gl);
gl->gl_target = gh->gh_state;
if (!(gh->gh_flags & (LM_FLAG_TRY | LM_FLAG_TRY_1CB)))
do_error(gl, 0); /* Fail queued try locks */
}
do_xmote(gl, gh, gl->gl_target);
out:
return;
out_sched:
clear_bit(GLF_LOCK, &gl->gl_flags);
smp_mb__after_atomic();
gl->gl_lockref.count++;
if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
gl->gl_lockref.count--;
return;
out_unlock:
clear_bit(GLF_LOCK, &gl->gl_flags);
smp_mb__after_atomic();
return;
}
static void delete_work_func(struct work_struct *work)
{
struct gfs2_glock *gl = container_of(work, struct gfs2_glock, gl_delete);
struct gfs2_sbd *sdp = gl->gl_name.ln_sbd;
struct inode *inode;
u64 no_addr = gl->gl_name.ln_number;
/* If someone's using this glock to create a new dinode, the block must
have been freed by another node, then re-used, in which case our
iopen callback is too late after the fact. Ignore it. */
if (test_bit(GLF_INODE_CREATING, &gl->gl_flags))
goto out;
inode = gfs2_lookup_by_inum(sdp, no_addr, NULL, GFS2_BLKST_UNLINKED);
if (inode && !IS_ERR(inode)) {
d_prune_aliases(inode);
iput(inode);
}
out:
gfs2_glock_put(gl);
}
static void glock_work_func(struct work_struct *work)
{
unsigned long delay = 0;
struct gfs2_glock *gl = container_of(work, struct gfs2_glock, gl_work.work);
int drop_ref = 0;
if (test_and_clear_bit(GLF_REPLY_PENDING, &gl->gl_flags)) {
finish_xmote(gl, gl->gl_reply);
drop_ref = 1;
}
spin_lock(&gl->gl_lockref.lock);
GFS2: Processes waiting on inode glock that no processes are holding This patch fixes a race in the GFS2 glock state machine that may result in lockups. The symptom is that all nodes but one will hang, waiting for a particular glock. All the holder records will have the "W" (Waiting) bit set. The other node will typically have the glock stuck in Exclusive mode (EX) with no holder records, but the dinode will be cached. In other words, an entry with "I:" will appear in the glock dump for that glock, but nothing else. The race has to do with the glock "Pending Demote" bit, which can be set, then immediately reset, thus losing the fact that another node needs the glock. The sequence of events is: 1. Something schedules the glock workqueue (e.g. glock request from fs) 2. The glock workqueue gets to the point between the test of the reply pending bit and the spin lock: if (test_and_clear_bit(GLF_REPLY_PENDING, &gl->gl_flags)) { finish_xmote(gl, gl->gl_reply); drop_ref = 1; } down_read(&gfs2_umount_flush_sem); <---- i.e. here spin_lock(&gl->gl_spin); 3. In comes (a) the reply to our EX lock request setting GLF_REPLY_PENDING and (b) the demote request which sets GLF_PENDING_DEMOTE 4. The following test is executed: if (test_and_clear_bit(GLF_PENDING_DEMOTE, &gl->gl_flags) && gl->gl_state != LM_ST_UNLOCKED && gl->gl_demote_state != LM_ST_EXCLUSIVE) { This resets the pending demote flag, and gl->gl_demote_state is not equal to exclusive, however because the reply from the dlm arrived after we checked for the GLF_REPLY_PENDING flag, gl->gl_state is still equal to unlocked, so although we reset the GLF_PENDING_DEMOTE flag, we didn't then set the GLF_DEMOTE flag or reinstate the GLF_PENDING_DEMOTE_FLAG. The patch closes the timing window by only transitioning the "Pending demote" bit to the "demote" flag once we know the other conditions (not unlocked and not exclusive) are met. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-05-24 16:44:42 +02:00
if (test_bit(GLF_PENDING_DEMOTE, &gl->gl_flags) &&
gl->gl_state != LM_ST_UNLOCKED &&
gl->gl_demote_state != LM_ST_EXCLUSIVE) {
unsigned long holdtime, now = jiffies;
GFS2: Processes waiting on inode glock that no processes are holding This patch fixes a race in the GFS2 glock state machine that may result in lockups. The symptom is that all nodes but one will hang, waiting for a particular glock. All the holder records will have the "W" (Waiting) bit set. The other node will typically have the glock stuck in Exclusive mode (EX) with no holder records, but the dinode will be cached. In other words, an entry with "I:" will appear in the glock dump for that glock, but nothing else. The race has to do with the glock "Pending Demote" bit, which can be set, then immediately reset, thus losing the fact that another node needs the glock. The sequence of events is: 1. Something schedules the glock workqueue (e.g. glock request from fs) 2. The glock workqueue gets to the point between the test of the reply pending bit and the spin lock: if (test_and_clear_bit(GLF_REPLY_PENDING, &gl->gl_flags)) { finish_xmote(gl, gl->gl_reply); drop_ref = 1; } down_read(&gfs2_umount_flush_sem); <---- i.e. here spin_lock(&gl->gl_spin); 3. In comes (a) the reply to our EX lock request setting GLF_REPLY_PENDING and (b) the demote request which sets GLF_PENDING_DEMOTE 4. The following test is executed: if (test_and_clear_bit(GLF_PENDING_DEMOTE, &gl->gl_flags) && gl->gl_state != LM_ST_UNLOCKED && gl->gl_demote_state != LM_ST_EXCLUSIVE) { This resets the pending demote flag, and gl->gl_demote_state is not equal to exclusive, however because the reply from the dlm arrived after we checked for the GLF_REPLY_PENDING flag, gl->gl_state is still equal to unlocked, so although we reset the GLF_PENDING_DEMOTE flag, we didn't then set the GLF_DEMOTE flag or reinstate the GLF_PENDING_DEMOTE_FLAG. The patch closes the timing window by only transitioning the "Pending demote" bit to the "demote" flag once we know the other conditions (not unlocked and not exclusive) are met. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-05-24 16:44:42 +02:00
holdtime = gl->gl_tchange + gl->gl_hold_time;
if (time_before(now, holdtime))
delay = holdtime - now;
GFS2: Processes waiting on inode glock that no processes are holding This patch fixes a race in the GFS2 glock state machine that may result in lockups. The symptom is that all nodes but one will hang, waiting for a particular glock. All the holder records will have the "W" (Waiting) bit set. The other node will typically have the glock stuck in Exclusive mode (EX) with no holder records, but the dinode will be cached. In other words, an entry with "I:" will appear in the glock dump for that glock, but nothing else. The race has to do with the glock "Pending Demote" bit, which can be set, then immediately reset, thus losing the fact that another node needs the glock. The sequence of events is: 1. Something schedules the glock workqueue (e.g. glock request from fs) 2. The glock workqueue gets to the point between the test of the reply pending bit and the spin lock: if (test_and_clear_bit(GLF_REPLY_PENDING, &gl->gl_flags)) { finish_xmote(gl, gl->gl_reply); drop_ref = 1; } down_read(&gfs2_umount_flush_sem); <---- i.e. here spin_lock(&gl->gl_spin); 3. In comes (a) the reply to our EX lock request setting GLF_REPLY_PENDING and (b) the demote request which sets GLF_PENDING_DEMOTE 4. The following test is executed: if (test_and_clear_bit(GLF_PENDING_DEMOTE, &gl->gl_flags) && gl->gl_state != LM_ST_UNLOCKED && gl->gl_demote_state != LM_ST_EXCLUSIVE) { This resets the pending demote flag, and gl->gl_demote_state is not equal to exclusive, however because the reply from the dlm arrived after we checked for the GLF_REPLY_PENDING flag, gl->gl_state is still equal to unlocked, so although we reset the GLF_PENDING_DEMOTE flag, we didn't then set the GLF_DEMOTE flag or reinstate the GLF_PENDING_DEMOTE_FLAG. The patch closes the timing window by only transitioning the "Pending demote" bit to the "demote" flag once we know the other conditions (not unlocked and not exclusive) are met. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-05-24 16:44:42 +02:00
if (!delay) {
clear_bit(GLF_PENDING_DEMOTE, &gl->gl_flags);
set_bit(GLF_DEMOTE, &gl->gl_flags);
}
}
run_queue(gl, 0);
spin_unlock(&gl->gl_lockref.lock);
if (!delay)
gfs2_glock_put(gl);
else {
if (gl->gl_name.ln_type != LM_TYPE_INODE)
delay = 0;
if (queue_delayed_work(glock_workqueue, &gl->gl_work, delay) == 0)
gfs2_glock_put(gl);
}
if (drop_ref)
gfs2_glock_put(gl);
}
/**
* gfs2_glock_get() - Get a glock, or create one if one doesn't exist
* @sdp: The GFS2 superblock
* @number: the lock number
* @glops: The glock_operations to use
* @create: If 0, don't create the glock if it doesn't exist
* @glp: the glock is returned here
*
* This does not lock a glock, just finds/creates structures for one.
*
* Returns: errno
*/
int gfs2_glock_get(struct gfs2_sbd *sdp, u64 number,
const struct gfs2_glock_operations *glops, int create,
struct gfs2_glock **glp)
{
struct super_block *s = sdp->sd_vfs;
struct lm_lockname name = { .ln_number = number,
.ln_type = glops->go_type,
.ln_sbd = sdp };
struct gfs2_glock *gl, *tmp = NULL;
struct address_space *mapping;
struct kmem_cache *cachep;
int ret, tries = 0;
gl = rhashtable_lookup_fast(&gl_hash_table, &name, ht_parms);
if (gl && !lockref_get_not_dead(&gl->gl_lockref))
gl = NULL;
*glp = gl;
if (gl)
return 0;
if (!create)
return -ENOENT;
if (glops->go_flags & GLOF_ASPACE)
cachep = gfs2_glock_aspace_cachep;
else
cachep = gfs2_glock_cachep;
gl = kmem_cache_alloc(cachep, GFP_NOFS);
if (!gl)
return -ENOMEM;
memset(&gl->gl_lksb, 0, sizeof(struct dlm_lksb));
if (glops->go_flags & GLOF_LVB) {
gl->gl_lksb.sb_lvbptr = kzalloc(GFS2_MIN_LVB_SIZE, GFP_NOFS);
if (!gl->gl_lksb.sb_lvbptr) {
kmem_cache_free(cachep, gl);
return -ENOMEM;
}
}
atomic_inc(&sdp->sd_glock_disposal);
gl->gl_node.next = NULL;
gl->gl_flags = 0;
gl->gl_name = name;
gl->gl_lockref.count = 1;
gl->gl_state = LM_ST_UNLOCKED;
gl->gl_target = LM_ST_UNLOCKED;
gl->gl_demote_state = LM_ST_EXCLUSIVE;
gl->gl_ops = glops;
gl->gl_dstamp = 0;
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 11:38:36 +01:00
preempt_disable();
/* We use the global stats to estimate the initial per-glock stats */
gl->gl_stats = this_cpu_ptr(sdp->sd_lkstats)->lkstats[glops->go_type];
preempt_enable();
gl->gl_stats.stats[GFS2_LKS_DCOUNT] = 0;
gl->gl_stats.stats[GFS2_LKS_QCOUNT] = 0;
gl->gl_tchange = jiffies;
gl->gl_object = NULL;
gl->gl_hold_time = GL_GLOCK_DFT_HOLD;
INIT_DELAYED_WORK(&gl->gl_work, glock_work_func);
INIT_WORK(&gl->gl_delete, delete_work_func);
mapping = gfs2_glock2aspace(gl);
if (mapping) {
mapping->a_ops = &gfs2_meta_aops;
mapping->host = s->s_bdev->bd_inode;
mapping->flags = 0;
mapping_set_gfp_mask(mapping, GFP_NOFS);
mapping->private_data = NULL;
mapping->writeback_index = 0;
}
again:
ret = rhashtable_lookup_insert_fast(&gl_hash_table, &gl->gl_node,
ht_parms);
if (ret == 0) {
*glp = gl;
return 0;
}
if (ret == -EEXIST) {
ret = 0;
tmp = rhashtable_lookup_fast(&gl_hash_table, &name, ht_parms);
if (tmp == NULL || !lockref_get_not_dead(&tmp->gl_lockref)) {
if (++tries < 100) {
cond_resched();
goto again;
}
tmp = NULL;
ret = -ENOMEM;
}
} else {
WARN_ON_ONCE(ret);
}
kfree(gl->gl_lksb.sb_lvbptr);
kmem_cache_free(cachep, gl);
atomic_dec(&sdp->sd_glock_disposal);
*glp = tmp;
return ret;
}
/**
* gfs2_holder_init - initialize a struct gfs2_holder in the default way
* @gl: the glock
* @state: the state we're requesting
* @flags: the modifier flags
* @gh: the holder structure
*
*/
void gfs2_holder_init(struct gfs2_glock *gl, unsigned int state, u16 flags,
struct gfs2_holder *gh)
{
INIT_LIST_HEAD(&gh->gh_list);
gh->gh_gl = gl;
gh->gh_ip = _RET_IP_;
gh->gh_owner_pid = get_pid(task_pid(current));
gh->gh_state = state;
gh->gh_flags = flags;
gh->gh_error = 0;
gh->gh_iflags = 0;
gfs2_glock_hold(gl);
}
/**
* gfs2_holder_reinit - reinitialize a struct gfs2_holder so we can requeue it
* @state: the state we're requesting
* @flags: the modifier flags
* @gh: the holder structure
*
* Don't mess with the glock.
*
*/
void gfs2_holder_reinit(unsigned int state, u16 flags, struct gfs2_holder *gh)
{
gh->gh_state = state;
gh->gh_flags = flags;
gh->gh_iflags = 0;
gh->gh_ip = _RET_IP_;
put_pid(gh->gh_owner_pid);
gh->gh_owner_pid = get_pid(task_pid(current));
}
/**
* gfs2_holder_uninit - uninitialize a holder structure (drop glock reference)
* @gh: the holder structure
*
*/
void gfs2_holder_uninit(struct gfs2_holder *gh)
{
put_pid(gh->gh_owner_pid);
gfs2_glock_put(gh->gh_gl);
gfs2_holder_mark_uninitialized(gh);
gh->gh_ip = 0;
}
/**
* gfs2_glock_wait - wait on a glock acquisition
* @gh: the glock holder
*
* Returns: 0 on success
*/
int gfs2_glock_wait(struct gfs2_holder *gh)
{
unsigned long time1 = jiffies;
might_sleep();
sched: Remove proliferation of wait_on_bit() action functions The current "wait_on_bit" interface requires an 'action' function to be provided which does the actual waiting. There are over 20 such functions, many of them identical. Most cases can be satisfied by one of just two functions, one which uses io_schedule() and one which just uses schedule(). So: Rename wait_on_bit and wait_on_bit_lock to wait_on_bit_action and wait_on_bit_lock_action to make it explicit that they need an action function. Introduce new wait_on_bit{,_lock} and wait_on_bit{,_lock}_io which are *not* given an action function but implicitly use a standard one. The decision to error-out if a signal is pending is now made based on the 'mode' argument rather than being encoded in the action function. All instances of the old wait_on_bit and wait_on_bit_lock which can use the new version have been changed accordingly and their action functions have been discarded. wait_on_bit{_lock} does not return any specific error code in the event of a signal so the caller must check for non-zero and interpolate their own error code as appropriate. The wait_on_bit() call in __fscache_wait_on_invalidate() was ambiguous as it specified TASK_UNINTERRUPTIBLE but used fscache_wait_bit_interruptible as an action function. David Howells confirms this should be uniformly "uninterruptible" The main remaining user of wait_on_bit{,_lock}_action is NFS which needs to use a freezer-aware schedule() call. A comment in fs/gfs2/glock.c notes that having multiple 'action' functions is useful as they display differently in the 'wchan' field of 'ps'. (and /proc/$PID/wchan). As the new bit_wait{,_io} functions are tagged "__sched", they will not show up at all, but something higher in the stack. So the distinction will still be visible, only with different function names (gds2_glock_wait versus gfs2_glock_dq_wait in the gfs2/glock.c case). Since first version of this patch (against 3.15) two new action functions appeared, on in NFS and one in CIFS. CIFS also now uses an action function that makes the same freezer aware schedule call as NFS. Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: David Howells <dhowells@redhat.com> (fscache, keys) Acked-by: Steven Whitehouse <swhiteho@redhat.com> (gfs2) Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steve French <sfrench@samba.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20140707051603.28027.72349.stgit@notabene.brown Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-07 07:16:04 +02:00
wait_on_bit(&gh->gh_iflags, HIF_WAIT, TASK_UNINTERRUPTIBLE);
if (time_after(jiffies, time1 + HZ)) /* have we waited > a second? */
/* Lengthen the minimum hold time. */
gh->gh_gl->gl_hold_time = min(gh->gh_gl->gl_hold_time +
GL_GLOCK_HOLD_INCR,
GL_GLOCK_MAX_HOLD);
return gh->gh_error;
}
/**
* handle_callback - process a demote request
* @gl: the glock
* @state: the state the caller wants us to change to
*
* There are only two requests that we are going to see in actual
* practise: LM_ST_SHARED and LM_ST_UNLOCKED
*/
static void handle_callback(struct gfs2_glock *gl, unsigned int state,
unsigned long delay, bool remote)
{
int bit = delay ? GLF_PENDING_DEMOTE : GLF_DEMOTE;
set_bit(bit, &gl->gl_flags);
if (gl->gl_demote_state == LM_ST_EXCLUSIVE) {
gl->gl_demote_state = state;
gl->gl_demote_time = jiffies;
} else if (gl->gl_demote_state != LM_ST_UNLOCKED &&
gl->gl_demote_state != state) {
gl->gl_demote_state = LM_ST_UNLOCKED;
}
if (gl->gl_ops->go_callback)
gl->gl_ops->go_callback(gl, remote);
trace_gfs2_demote_rq(gl, remote);
}
void gfs2_print_dbg(struct seq_file *seq, const char *fmt, ...)
{
struct va_format vaf;
va_list args;
va_start(args, fmt);
if (seq) {
seq_vprintf(seq, fmt, args);
} else {
vaf.fmt = fmt;
vaf.va = &args;
pr_err("%pV", &vaf);
}
va_end(args);
}
/**
* add_to_queue - Add a holder to the wait queue (but look for recursion)
* @gh: the holder structure to add
*
* Eventually we should move the recursive locking trap to a
* debugging option or something like that. This is the fast
* path and needs to have the minimum number of distractions.
*
*/
static inline void add_to_queue(struct gfs2_holder *gh)
__releases(&gl->gl_lockref.lock)
__acquires(&gl->gl_lockref.lock)
{
struct gfs2_glock *gl = gh->gh_gl;
struct gfs2_sbd *sdp = gl->gl_name.ln_sbd;
struct list_head *insert_pt = NULL;
struct gfs2_holder *gh2;
int try_futile = 0;
BUG_ON(gh->gh_owner_pid == NULL);
if (test_and_set_bit(HIF_WAIT, &gh->gh_iflags))
BUG();
if (gh->gh_flags & (LM_FLAG_TRY | LM_FLAG_TRY_1CB)) {
if (test_bit(GLF_LOCK, &gl->gl_flags))
try_futile = !may_grant(gl, gh);
if (test_bit(GLF_INVALIDATE_IN_PROGRESS, &gl->gl_flags))
goto fail;
}
list_for_each_entry(gh2, &gl->gl_holders, gh_list) {
if (unlikely(gh2->gh_owner_pid == gh->gh_owner_pid &&
(gh->gh_gl->gl_ops->go_type != LM_TYPE_FLOCK)))
goto trap_recursive;
if (try_futile &&
!(gh2->gh_flags & (LM_FLAG_TRY | LM_FLAG_TRY_1CB))) {
fail:
gh->gh_error = GLR_TRYFAILED;
gfs2_holder_wake(gh);
return;
}
if (test_bit(HIF_HOLDER, &gh2->gh_iflags))
continue;
if (unlikely((gh->gh_flags & LM_FLAG_PRIORITY) && !insert_pt))
insert_pt = &gh2->gh_list;
}
set_bit(GLF_QUEUED, &gl->gl_flags);
trace_gfs2_glock_queue(gh, 1);
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 11:38:36 +01:00
gfs2_glstats_inc(gl, GFS2_LKS_QCOUNT);
gfs2_sbstats_inc(gl, GFS2_LKS_QCOUNT);
if (likely(insert_pt == NULL)) {
list_add_tail(&gh->gh_list, &gl->gl_holders);
if (unlikely(gh->gh_flags & LM_FLAG_PRIORITY))
goto do_cancel;
return;
}
list_add_tail(&gh->gh_list, insert_pt);
do_cancel:
gh = list_entry(gl->gl_holders.next, struct gfs2_holder, gh_list);
if (!(gh->gh_flags & LM_FLAG_PRIORITY)) {
spin_unlock(&gl->gl_lockref.lock);
if (sdp->sd_lockstruct.ls_ops->lm_cancel)
sdp->sd_lockstruct.ls_ops->lm_cancel(gl);
spin_lock(&gl->gl_lockref.lock);
}
return;
trap_recursive:
pr_err("original: %pSR\n", (void *)gh2->gh_ip);
pr_err("pid: %d\n", pid_nr(gh2->gh_owner_pid));
pr_err("lock type: %d req lock state : %d\n",
gh2->gh_gl->gl_name.ln_type, gh2->gh_state);
pr_err("new: %pSR\n", (void *)gh->gh_ip);
pr_err("pid: %d\n", pid_nr(gh->gh_owner_pid));
pr_err("lock type: %d req lock state : %d\n",
gh->gh_gl->gl_name.ln_type, gh->gh_state);
gfs2_dump_glock(NULL, gl);
BUG();
}
/**
* gfs2_glock_nq - enqueue a struct gfs2_holder onto a glock (acquire a glock)
* @gh: the holder structure
*
* if (gh->gh_flags & GL_ASYNC), this never returns an error
*
* Returns: 0, GLR_TRYFAILED, or errno on failure
*/
int gfs2_glock_nq(struct gfs2_holder *gh)
{
struct gfs2_glock *gl = gh->gh_gl;
struct gfs2_sbd *sdp = gl->gl_name.ln_sbd;
int error = 0;
if (unlikely(test_bit(SDF_SHUTDOWN, &sdp->sd_flags)))
return -EIO;
if (test_bit(GLF_LRU, &gl->gl_flags))
gfs2_glock_remove_from_lru(gl);
spin_lock(&gl->gl_lockref.lock);
add_to_queue(gh);
if (unlikely((LM_FLAG_NOEXP & gh->gh_flags) &&
test_and_clear_bit(GLF_FROZEN, &gl->gl_flags))) {
set_bit(GLF_REPLY_PENDING, &gl->gl_flags);
gl->gl_lockref.count++;
if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
gl->gl_lockref.count--;
}
run_queue(gl, 1);
spin_unlock(&gl->gl_lockref.lock);
if (!(gh->gh_flags & GL_ASYNC))
error = gfs2_glock_wait(gh);
return error;
}
/**
* gfs2_glock_poll - poll to see if an async request has been completed
* @gh: the holder
*
* Returns: 1 if the request is ready to be gfs2_glock_wait()ed on
*/
int gfs2_glock_poll(struct gfs2_holder *gh)
{
return test_bit(HIF_WAIT, &gh->gh_iflags) ? 0 : 1;
}
/**
* gfs2_glock_dq - dequeue a struct gfs2_holder from a glock (release a glock)
* @gh: the glock holder
*
*/
void gfs2_glock_dq(struct gfs2_holder *gh)
{
struct gfs2_glock *gl = gh->gh_gl;
const struct gfs2_glock_operations *glops = gl->gl_ops;
unsigned delay = 0;
int fast_path = 0;
spin_lock(&gl->gl_lockref.lock);
if (gh->gh_flags & GL_NOCACHE)
handle_callback(gl, LM_ST_UNLOCKED, 0, false);
list_del_init(&gh->gh_list);
clear_bit(HIF_HOLDER, &gh->gh_iflags);
if (find_first_holder(gl) == NULL) {
if (glops->go_unlock) {
GLOCK_BUG_ON(gl, test_and_set_bit(GLF_LOCK, &gl->gl_flags));
spin_unlock(&gl->gl_lockref.lock);
glops->go_unlock(gh);
spin_lock(&gl->gl_lockref.lock);
clear_bit(GLF_LOCK, &gl->gl_flags);
}
if (list_empty(&gl->gl_holders) &&
!test_bit(GLF_PENDING_DEMOTE, &gl->gl_flags) &&
!test_bit(GLF_DEMOTE, &gl->gl_flags))
fast_path = 1;
}
if (!test_bit(GLF_LFLUSH, &gl->gl_flags) && demote_ok(gl) &&
(glops->go_flags & GLOF_LRU))
gfs2_glock_add_to_lru(gl);
trace_gfs2_glock_queue(gh, 0);
spin_unlock(&gl->gl_lockref.lock);
if (likely(fast_path))
return;
gfs2_glock_hold(gl);
if (test_bit(GLF_PENDING_DEMOTE, &gl->gl_flags) &&
!test_bit(GLF_DEMOTE, &gl->gl_flags) &&
gl->gl_name.ln_type == LM_TYPE_INODE)
delay = gl->gl_hold_time;
if (queue_delayed_work(glock_workqueue, &gl->gl_work, delay) == 0)
gfs2_glock_put(gl);
}
void gfs2_glock_dq_wait(struct gfs2_holder *gh)
{
struct gfs2_glock *gl = gh->gh_gl;
gfs2_glock_dq(gh);
might_sleep();
sched: Remove proliferation of wait_on_bit() action functions The current "wait_on_bit" interface requires an 'action' function to be provided which does the actual waiting. There are over 20 such functions, many of them identical. Most cases can be satisfied by one of just two functions, one which uses io_schedule() and one which just uses schedule(). So: Rename wait_on_bit and wait_on_bit_lock to wait_on_bit_action and wait_on_bit_lock_action to make it explicit that they need an action function. Introduce new wait_on_bit{,_lock} and wait_on_bit{,_lock}_io which are *not* given an action function but implicitly use a standard one. The decision to error-out if a signal is pending is now made based on the 'mode' argument rather than being encoded in the action function. All instances of the old wait_on_bit and wait_on_bit_lock which can use the new version have been changed accordingly and their action functions have been discarded. wait_on_bit{_lock} does not return any specific error code in the event of a signal so the caller must check for non-zero and interpolate their own error code as appropriate. The wait_on_bit() call in __fscache_wait_on_invalidate() was ambiguous as it specified TASK_UNINTERRUPTIBLE but used fscache_wait_bit_interruptible as an action function. David Howells confirms this should be uniformly "uninterruptible" The main remaining user of wait_on_bit{,_lock}_action is NFS which needs to use a freezer-aware schedule() call. A comment in fs/gfs2/glock.c notes that having multiple 'action' functions is useful as they display differently in the 'wchan' field of 'ps'. (and /proc/$PID/wchan). As the new bit_wait{,_io} functions are tagged "__sched", they will not show up at all, but something higher in the stack. So the distinction will still be visible, only with different function names (gds2_glock_wait versus gfs2_glock_dq_wait in the gfs2/glock.c case). Since first version of this patch (against 3.15) two new action functions appeared, on in NFS and one in CIFS. CIFS also now uses an action function that makes the same freezer aware schedule call as NFS. Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: David Howells <dhowells@redhat.com> (fscache, keys) Acked-by: Steven Whitehouse <swhiteho@redhat.com> (gfs2) Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steve French <sfrench@samba.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20140707051603.28027.72349.stgit@notabene.brown Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-07 07:16:04 +02:00
wait_on_bit(&gl->gl_flags, GLF_DEMOTE, TASK_UNINTERRUPTIBLE);
}
/**
* gfs2_glock_dq_uninit - dequeue a holder from a glock and initialize it
* @gh: the holder structure
*
*/
void gfs2_glock_dq_uninit(struct gfs2_holder *gh)
{
gfs2_glock_dq(gh);
gfs2_holder_uninit(gh);
}
/**
* gfs2_glock_nq_num - acquire a glock based on lock number
* @sdp: the filesystem
* @number: the lock number
* @glops: the glock operations for the type of glock
* @state: the state to acquire the glock in
* @flags: modifier flags for the acquisition
* @gh: the struct gfs2_holder
*
* Returns: errno
*/
int gfs2_glock_nq_num(struct gfs2_sbd *sdp, u64 number,
const struct gfs2_glock_operations *glops,
unsigned int state, u16 flags, struct gfs2_holder *gh)
{
struct gfs2_glock *gl;
int error;
error = gfs2_glock_get(sdp, number, glops, CREATE, &gl);
if (!error) {
error = gfs2_glock_nq_init(gl, state, flags, gh);
gfs2_glock_put(gl);
}
return error;
}
/**
* glock_compare - Compare two struct gfs2_glock structures for sorting
* @arg_a: the first structure
* @arg_b: the second structure
*
*/
static int glock_compare(const void *arg_a, const void *arg_b)
{
const struct gfs2_holder *gh_a = *(const struct gfs2_holder **)arg_a;
const struct gfs2_holder *gh_b = *(const struct gfs2_holder **)arg_b;
const struct lm_lockname *a = &gh_a->gh_gl->gl_name;
const struct lm_lockname *b = &gh_b->gh_gl->gl_name;
if (a->ln_number > b->ln_number)
return 1;
if (a->ln_number < b->ln_number)
return -1;
BUG_ON(gh_a->gh_gl->gl_ops->go_type == gh_b->gh_gl->gl_ops->go_type);
return 0;
}
/**
* nq_m_sync - synchonously acquire more than one glock in deadlock free order
* @num_gh: the number of structures
* @ghs: an array of struct gfs2_holder structures
*
* Returns: 0 on success (all glocks acquired),
* errno on failure (no glocks acquired)
*/
static int nq_m_sync(unsigned int num_gh, struct gfs2_holder *ghs,
struct gfs2_holder **p)
{
unsigned int x;
int error = 0;
for (x = 0; x < num_gh; x++)
p[x] = &ghs[x];
sort(p, num_gh, sizeof(struct gfs2_holder *), glock_compare, NULL);
for (x = 0; x < num_gh; x++) {
p[x]->gh_flags &= ~(LM_FLAG_TRY | GL_ASYNC);
error = gfs2_glock_nq(p[x]);
if (error) {
while (x--)
gfs2_glock_dq(p[x]);
break;
}
}
return error;
}
/**
* gfs2_glock_nq_m - acquire multiple glocks
* @num_gh: the number of structures
* @ghs: an array of struct gfs2_holder structures
*
*
* Returns: 0 on success (all glocks acquired),
* errno on failure (no glocks acquired)
*/
int gfs2_glock_nq_m(unsigned int num_gh, struct gfs2_holder *ghs)
{
struct gfs2_holder *tmp[4];
struct gfs2_holder **pph = tmp;
int error = 0;
switch(num_gh) {
case 0:
return 0;
case 1:
ghs->gh_flags &= ~(LM_FLAG_TRY | GL_ASYNC);
return gfs2_glock_nq(ghs);
default:
if (num_gh <= 4)
break;
pph = kmalloc(num_gh * sizeof(struct gfs2_holder *), GFP_NOFS);
if (!pph)
return -ENOMEM;
}
error = nq_m_sync(num_gh, ghs, pph);
if (pph != tmp)
kfree(pph);
return error;
}
/**
* gfs2_glock_dq_m - release multiple glocks
* @num_gh: the number of structures
* @ghs: an array of struct gfs2_holder structures
*
*/
void gfs2_glock_dq_m(unsigned int num_gh, struct gfs2_holder *ghs)
{
while (num_gh--)
gfs2_glock_dq(&ghs[num_gh]);
}
void gfs2_glock_cb(struct gfs2_glock *gl, unsigned int state)
{
unsigned long delay = 0;
unsigned long holdtime;
unsigned long now = jiffies;
gfs2_glock_hold(gl);
holdtime = gl->gl_tchange + gl->gl_hold_time;
if (test_bit(GLF_QUEUED, &gl->gl_flags) &&
gl->gl_name.ln_type == LM_TYPE_INODE) {
if (time_before(now, holdtime))
delay = holdtime - now;
if (test_bit(GLF_REPLY_PENDING, &gl->gl_flags))
delay = gl->gl_hold_time;
}
spin_lock(&gl->gl_lockref.lock);
handle_callback(gl, state, delay, true);
spin_unlock(&gl->gl_lockref.lock);
if (queue_delayed_work(glock_workqueue, &gl->gl_work, delay) == 0)
gfs2_glock_put(gl);
}
/**
* gfs2_should_freeze - Figure out if glock should be frozen
* @gl: The glock in question
*
* Glocks are not frozen if (a) the result of the dlm operation is
* an error, (b) the locking operation was an unlock operation or
* (c) if there is a "noexp" flagged request anywhere in the queue
*
* Returns: 1 if freezing should occur, 0 otherwise
*/
static int gfs2_should_freeze(const struct gfs2_glock *gl)
{
const struct gfs2_holder *gh;
if (gl->gl_reply & ~LM_OUT_ST_MASK)
return 0;
if (gl->gl_target == LM_ST_UNLOCKED)
return 0;
list_for_each_entry(gh, &gl->gl_holders, gh_list) {
if (test_bit(HIF_HOLDER, &gh->gh_iflags))
continue;
if (LM_FLAG_NOEXP & gh->gh_flags)
return 0;
}
return 1;
}
/**
* gfs2_glock_complete - Callback used by locking
* @gl: Pointer to the glock
* @ret: The return value from the dlm
*
* The gl_reply field is under the gl_lockref.lock lock so that it is ok
* to use a bitfield shared with other glock state fields.
*/
void gfs2_glock_complete(struct gfs2_glock *gl, int ret)
{
struct lm_lockstruct *ls = &gl->gl_name.ln_sbd->sd_lockstruct;
spin_lock(&gl->gl_lockref.lock);
gl->gl_reply = ret;
if (unlikely(test_bit(DFL_BLOCK_LOCKS, &ls->ls_recover_flags))) {
if (gfs2_should_freeze(gl)) {
set_bit(GLF_FROZEN, &gl->gl_flags);
spin_unlock(&gl->gl_lockref.lock);
return;
}
}
gl->gl_lockref.count++;
set_bit(GLF_REPLY_PENDING, &gl->gl_flags);
spin_unlock(&gl->gl_lockref.lock);
if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
gfs2_glock_put(gl);
}
static int glock_cmp(void *priv, struct list_head *a, struct list_head *b)
{
struct gfs2_glock *gla, *glb;
gla = list_entry(a, struct gfs2_glock, gl_lru);
glb = list_entry(b, struct gfs2_glock, gl_lru);
if (gla->gl_name.ln_number > glb->gl_name.ln_number)
return 1;
if (gla->gl_name.ln_number < glb->gl_name.ln_number)
return -1;
return 0;
}
/**
* gfs2_dispose_glock_lru - Demote a list of glocks
* @list: The list to dispose of
*
* Disposing of glocks may involve disk accesses, so that here we sort
* the glocks by number (i.e. disk location of the inodes) so that if
* there are any such accesses, they'll be sent in order (mostly).
*
* Must be called under the lru_lock, but may drop and retake this
* lock. While the lru_lock is dropped, entries may vanish from the
* list, but no new entries will appear on the list (since it is
* private)
*/
static void gfs2_dispose_glock_lru(struct list_head *list)
__releases(&lru_lock)
__acquires(&lru_lock)
{
struct gfs2_glock *gl;
list_sort(NULL, list, glock_cmp);
while(!list_empty(list)) {
gl = list_entry(list->next, struct gfs2_glock, gl_lru);
list_del_init(&gl->gl_lru);
if (!spin_trylock(&gl->gl_lockref.lock)) {
add_back_to_lru:
list_add(&gl->gl_lru, &lru_list);
atomic_inc(&lru_count);
continue;
}
if (test_and_set_bit(GLF_LOCK, &gl->gl_flags)) {
spin_unlock(&gl->gl_lockref.lock);
goto add_back_to_lru;
}
clear_bit(GLF_LRU, &gl->gl_flags);
gl->gl_lockref.count++;
if (demote_ok(gl))
handle_callback(gl, LM_ST_UNLOCKED, 0, false);
WARN_ON(!test_and_clear_bit(GLF_LOCK, &gl->gl_flags));
if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
gl->gl_lockref.count--;
spin_unlock(&gl->gl_lockref.lock);
cond_resched_lock(&lru_lock);
}
}
/**
* gfs2_scan_glock_lru - Scan the LRU looking for locks to demote
* @nr: The number of entries to scan
*
* This function selects the entries on the LRU which are able to
* be demoted, and then kicks off the process by calling
* gfs2_dispose_glock_lru() above.
*/
fs: convert fs shrinkers to new scan/count API Convert the filesystem shrinkers to use the new API, and standardise some of the behaviours of the shrinkers at the same time. For example, nr_to_scan means the number of objects to scan, not the number of objects to free. I refactored the CIFS idmap shrinker a little - it really needs to be broken up into a shrinker per tree and keep an item count with the tree root so that we don't need to walk the tree every time the shrinker needs to count the number of objects in the tree (i.e. all the time under memory pressure). [glommer@openvz.org: fixes for ext4, ubifs, nfs, cifs and glock. Fixes are needed mainly due to new code merged in the tree] [assorted fixes folded in] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Jan Kara <jack@suse.cz> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 02:18:09 +02:00
static long gfs2_scan_glock_lru(int nr)
{
struct gfs2_glock *gl;
LIST_HEAD(skipped);
LIST_HEAD(dispose);
fs: convert fs shrinkers to new scan/count API Convert the filesystem shrinkers to use the new API, and standardise some of the behaviours of the shrinkers at the same time. For example, nr_to_scan means the number of objects to scan, not the number of objects to free. I refactored the CIFS idmap shrinker a little - it really needs to be broken up into a shrinker per tree and keep an item count with the tree root so that we don't need to walk the tree every time the shrinker needs to count the number of objects in the tree (i.e. all the time under memory pressure). [glommer@openvz.org: fixes for ext4, ubifs, nfs, cifs and glock. Fixes are needed mainly due to new code merged in the tree] [assorted fixes folded in] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Jan Kara <jack@suse.cz> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 02:18:09 +02:00
long freed = 0;
spin_lock(&lru_lock);
fs: convert fs shrinkers to new scan/count API Convert the filesystem shrinkers to use the new API, and standardise some of the behaviours of the shrinkers at the same time. For example, nr_to_scan means the number of objects to scan, not the number of objects to free. I refactored the CIFS idmap shrinker a little - it really needs to be broken up into a shrinker per tree and keep an item count with the tree root so that we don't need to walk the tree every time the shrinker needs to count the number of objects in the tree (i.e. all the time under memory pressure). [glommer@openvz.org: fixes for ext4, ubifs, nfs, cifs and glock. Fixes are needed mainly due to new code merged in the tree] [assorted fixes folded in] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Jan Kara <jack@suse.cz> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 02:18:09 +02:00
while ((nr-- >= 0) && !list_empty(&lru_list)) {
gl = list_entry(lru_list.next, struct gfs2_glock, gl_lru);
/* Test for being demotable */
if (!test_bit(GLF_LOCK, &gl->gl_flags)) {
list_move(&gl->gl_lru, &dispose);
atomic_dec(&lru_count);
fs: convert fs shrinkers to new scan/count API Convert the filesystem shrinkers to use the new API, and standardise some of the behaviours of the shrinkers at the same time. For example, nr_to_scan means the number of objects to scan, not the number of objects to free. I refactored the CIFS idmap shrinker a little - it really needs to be broken up into a shrinker per tree and keep an item count with the tree root so that we don't need to walk the tree every time the shrinker needs to count the number of objects in the tree (i.e. all the time under memory pressure). [glommer@openvz.org: fixes for ext4, ubifs, nfs, cifs and glock. Fixes are needed mainly due to new code merged in the tree] [assorted fixes folded in] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Jan Kara <jack@suse.cz> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 02:18:09 +02:00
freed++;
continue;
}
list_move(&gl->gl_lru, &skipped);
}
list_splice(&skipped, &lru_list);
if (!list_empty(&dispose))
gfs2_dispose_glock_lru(&dispose);
spin_unlock(&lru_lock);
fs: convert fs shrinkers to new scan/count API Convert the filesystem shrinkers to use the new API, and standardise some of the behaviours of the shrinkers at the same time. For example, nr_to_scan means the number of objects to scan, not the number of objects to free. I refactored the CIFS idmap shrinker a little - it really needs to be broken up into a shrinker per tree and keep an item count with the tree root so that we don't need to walk the tree every time the shrinker needs to count the number of objects in the tree (i.e. all the time under memory pressure). [glommer@openvz.org: fixes for ext4, ubifs, nfs, cifs and glock. Fixes are needed mainly due to new code merged in the tree] [assorted fixes folded in] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Jan Kara <jack@suse.cz> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 02:18:09 +02:00
return freed;
}
fs: convert fs shrinkers to new scan/count API Convert the filesystem shrinkers to use the new API, and standardise some of the behaviours of the shrinkers at the same time. For example, nr_to_scan means the number of objects to scan, not the number of objects to free. I refactored the CIFS idmap shrinker a little - it really needs to be broken up into a shrinker per tree and keep an item count with the tree root so that we don't need to walk the tree every time the shrinker needs to count the number of objects in the tree (i.e. all the time under memory pressure). [glommer@openvz.org: fixes for ext4, ubifs, nfs, cifs and glock. Fixes are needed mainly due to new code merged in the tree] [assorted fixes folded in] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Jan Kara <jack@suse.cz> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 02:18:09 +02:00
static unsigned long gfs2_glock_shrink_scan(struct shrinker *shrink,
struct shrink_control *sc)
{
fs: convert fs shrinkers to new scan/count API Convert the filesystem shrinkers to use the new API, and standardise some of the behaviours of the shrinkers at the same time. For example, nr_to_scan means the number of objects to scan, not the number of objects to free. I refactored the CIFS idmap shrinker a little - it really needs to be broken up into a shrinker per tree and keep an item count with the tree root so that we don't need to walk the tree every time the shrinker needs to count the number of objects in the tree (i.e. all the time under memory pressure). [glommer@openvz.org: fixes for ext4, ubifs, nfs, cifs and glock. Fixes are needed mainly due to new code merged in the tree] [assorted fixes folded in] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Jan Kara <jack@suse.cz> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 02:18:09 +02:00
if (!(sc->gfp_mask & __GFP_FS))
return SHRINK_STOP;
return gfs2_scan_glock_lru(sc->nr_to_scan);
}
fs: convert fs shrinkers to new scan/count API Convert the filesystem shrinkers to use the new API, and standardise some of the behaviours of the shrinkers at the same time. For example, nr_to_scan means the number of objects to scan, not the number of objects to free. I refactored the CIFS idmap shrinker a little - it really needs to be broken up into a shrinker per tree and keep an item count with the tree root so that we don't need to walk the tree every time the shrinker needs to count the number of objects in the tree (i.e. all the time under memory pressure). [glommer@openvz.org: fixes for ext4, ubifs, nfs, cifs and glock. Fixes are needed mainly due to new code merged in the tree] [assorted fixes folded in] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Jan Kara <jack@suse.cz> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 02:18:09 +02:00
static unsigned long gfs2_glock_shrink_count(struct shrinker *shrink,
struct shrink_control *sc)
{
super: fix calculation of shrinkable objects for small numbers The sysctl knob sysctl_vfs_cache_pressure is used to determine which percentage of the shrinkable objects in our cache we should actively try to shrink. It works great in situations in which we have many objects (at least more than 100), because the aproximation errors will be negligible. But if this is not the case, specially when total_objects < 100, we may end up concluding that we have no objects at all (total / 100 = 0, if total < 100). This is certainly not the biggest killer in the world, but may matter in very low kernel memory situations. Signed-off-by: Glauber Costa <glommer@openvz.org> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 02:17:53 +02:00
return vfs_pressure_ratio(atomic_read(&lru_count));
}
static struct shrinker glock_shrinker = {
.seeks = DEFAULT_SEEKS,
fs: convert fs shrinkers to new scan/count API Convert the filesystem shrinkers to use the new API, and standardise some of the behaviours of the shrinkers at the same time. For example, nr_to_scan means the number of objects to scan, not the number of objects to free. I refactored the CIFS idmap shrinker a little - it really needs to be broken up into a shrinker per tree and keep an item count with the tree root so that we don't need to walk the tree every time the shrinker needs to count the number of objects in the tree (i.e. all the time under memory pressure). [glommer@openvz.org: fixes for ext4, ubifs, nfs, cifs and glock. Fixes are needed mainly due to new code merged in the tree] [assorted fixes folded in] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Jan Kara <jack@suse.cz> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 02:18:09 +02:00
.count_objects = gfs2_glock_shrink_count,
.scan_objects = gfs2_glock_shrink_scan,
};
/**
* examine_bucket - Call a function for glock in a hash bucket
* @examiner: the function
* @sdp: the filesystem
* @bucket: the bucket
*
*/
static void glock_hash_walk(glock_examiner examiner, const struct gfs2_sbd *sdp)
{
struct gfs2_glock *gl;
struct rhash_head *pos;
const struct bucket_table *tbl;
int i;
rcu_read_lock();
tbl = rht_dereference_rcu(gl_hash_table.tbl, &gl_hash_table);
for (i = 0; i < tbl->size; i++) {
rht_for_each_entry_rcu(gl, pos, tbl, i, gl_node) {
if ((gl->gl_name.ln_sbd == sdp) &&
lockref_get_not_dead(&gl->gl_lockref))
examiner(gl);
}
}
rcu_read_unlock();
cond_resched();
}
/**
* thaw_glock - thaw out a glock which has an unprocessed reply waiting
* @gl: The glock to thaw
*
*/
static void thaw_glock(struct gfs2_glock *gl)
{
if (!test_and_clear_bit(GLF_FROZEN, &gl->gl_flags))
goto out;
set_bit(GLF_REPLY_PENDING, &gl->gl_flags);
if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0) {
out:
gfs2_glock_put(gl);
}
}
/**
* clear_glock - look at a glock and see if we can free it from glock cache
* @gl: the glock to look at
*
*/
static void clear_glock(struct gfs2_glock *gl)
{
gfs2_glock_remove_from_lru(gl);
spin_lock(&gl->gl_lockref.lock);
if (gl->gl_state != LM_ST_UNLOCKED)
handle_callback(gl, LM_ST_UNLOCKED, 0, false);
spin_unlock(&gl->gl_lockref.lock);
if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
gfs2_glock_put(gl);
}
/**
* gfs2_glock_thaw - Thaw any frozen glocks
* @sdp: The super block
*
*/
void gfs2_glock_thaw(struct gfs2_sbd *sdp)
{
glock_hash_walk(thaw_glock, sdp);
}
static void dump_glock(struct seq_file *seq, struct gfs2_glock *gl)
{
spin_lock(&gl->gl_lockref.lock);
gfs2_dump_glock(seq, gl);
spin_unlock(&gl->gl_lockref.lock);
}
static void dump_glock_func(struct gfs2_glock *gl)
{
dump_glock(NULL, gl);
}
/**
* gfs2_gl_hash_clear - Empty out the glock hash table
* @sdp: the filesystem
* @wait: wait until it's all gone
*
* Called when unmounting the filesystem.
*/
void gfs2_gl_hash_clear(struct gfs2_sbd *sdp)
{
set_bit(SDF_SKIP_DLM_UNLOCK, &sdp->sd_flags);
flush_workqueue(glock_workqueue);
glock_hash_walk(clear_glock, sdp);
flush_workqueue(glock_workqueue);
wait_event_timeout(sdp->sd_glock_wait,
atomic_read(&sdp->sd_glock_disposal) == 0,
HZ * 600);
glock_hash_walk(dump_glock_func, sdp);
}
void gfs2_glock_finish_truncate(struct gfs2_inode *ip)
{
struct gfs2_glock *gl = ip->i_gl;
int ret;
ret = gfs2_truncatei_resume(ip);
gfs2_assert_withdraw(gl->gl_name.ln_sbd, ret == 0);
spin_lock(&gl->gl_lockref.lock);
clear_bit(GLF_LOCK, &gl->gl_flags);
run_queue(gl, 1);
spin_unlock(&gl->gl_lockref.lock);
}
static const char *state2str(unsigned state)
{
switch(state) {
case LM_ST_UNLOCKED:
return "UN";
case LM_ST_SHARED:
return "SH";
case LM_ST_DEFERRED:
return "DF";
case LM_ST_EXCLUSIVE:
return "EX";
}
return "??";
}
static const char *hflags2str(char *buf, u16 flags, unsigned long iflags)
{
char *p = buf;
if (flags & LM_FLAG_TRY)
*p++ = 't';
if (flags & LM_FLAG_TRY_1CB)
*p++ = 'T';
if (flags & LM_FLAG_NOEXP)
*p++ = 'e';
if (flags & LM_FLAG_ANY)
*p++ = 'A';
if (flags & LM_FLAG_PRIORITY)
*p++ = 'p';
if (flags & GL_ASYNC)
*p++ = 'a';
if (flags & GL_EXACT)
*p++ = 'E';
if (flags & GL_NOCACHE)
*p++ = 'c';
if (test_bit(HIF_HOLDER, &iflags))
*p++ = 'H';
if (test_bit(HIF_WAIT, &iflags))
*p++ = 'W';
if (test_bit(HIF_FIRST, &iflags))
*p++ = 'F';
*p = 0;
return buf;
}
/**
* dump_holder - print information about a glock holder
* @seq: the seq_file struct
* @gh: the glock holder
*
*/
static void dump_holder(struct seq_file *seq, const struct gfs2_holder *gh)
{
struct task_struct *gh_owner = NULL;
char flags_buf[32];
rcu_read_lock();
if (gh->gh_owner_pid)
gh_owner = pid_task(gh->gh_owner_pid, PIDTYPE_PID);
gfs2_print_dbg(seq, " H: s:%s f:%s e:%d p:%ld [%s] %pS\n",
state2str(gh->gh_state),
hflags2str(flags_buf, gh->gh_flags, gh->gh_iflags),
gh->gh_error,
gh->gh_owner_pid ? (long)pid_nr(gh->gh_owner_pid) : -1,
gh_owner ? gh_owner->comm : "(ended)",
(void *)gh->gh_ip);
rcu_read_unlock();
}
static const char *gflags2str(char *buf, const struct gfs2_glock *gl)
{
const unsigned long *gflags = &gl->gl_flags;
char *p = buf;
if (test_bit(GLF_LOCK, gflags))
*p++ = 'l';
if (test_bit(GLF_DEMOTE, gflags))
*p++ = 'D';
if (test_bit(GLF_PENDING_DEMOTE, gflags))
*p++ = 'd';
if (test_bit(GLF_DEMOTE_IN_PROGRESS, gflags))
*p++ = 'p';
if (test_bit(GLF_DIRTY, gflags))
*p++ = 'y';
if (test_bit(GLF_LFLUSH, gflags))
*p++ = 'f';
if (test_bit(GLF_INVALIDATE_IN_PROGRESS, gflags))
*p++ = 'i';
if (test_bit(GLF_REPLY_PENDING, gflags))
*p++ = 'r';
if (test_bit(GLF_INITIAL, gflags))
*p++ = 'I';
if (test_bit(GLF_FROZEN, gflags))
*p++ = 'F';
if (test_bit(GLF_QUEUED, gflags))
*p++ = 'q';
if (test_bit(GLF_LRU, gflags))
*p++ = 'L';
if (gl->gl_object)
*p++ = 'o';
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 11:38:36 +01:00
if (test_bit(GLF_BLOCKING, gflags))
*p++ = 'b';
*p = 0;
return buf;
}
/**
* gfs2_dump_glock - print information about a glock
* @seq: The seq_file struct
* @gl: the glock
*
* The file format is as follows:
* One line per object, capital letters are used to indicate objects
* G = glock, I = Inode, R = rgrp, H = holder. Glocks are not indented,
* other objects are indented by a single space and follow the glock to
* which they are related. Fields are indicated by lower case letters
* followed by a colon and the field value, except for strings which are in
* [] so that its possible to see if they are composed of spaces for
* example. The field's are n = number (id of the object), f = flags,
* t = type, s = state, r = refcount, e = error, p = pid.
*
*/
void gfs2_dump_glock(struct seq_file *seq, const struct gfs2_glock *gl)
{
const struct gfs2_glock_operations *glops = gl->gl_ops;
unsigned long long dtime;
const struct gfs2_holder *gh;
char gflags_buf[32];
dtime = jiffies - gl->gl_demote_time;
dtime *= 1000000/HZ; /* demote time in uSec */
if (!test_bit(GLF_DEMOTE, &gl->gl_flags))
dtime = 0;
gfs2_print_dbg(seq, "G: s:%s n:%u/%llx f:%s t:%s d:%s/%llu a:%d v:%d r:%d m:%ld\n",
state2str(gl->gl_state),
gl->gl_name.ln_type,
(unsigned long long)gl->gl_name.ln_number,
gflags2str(gflags_buf, gl),
state2str(gl->gl_target),
state2str(gl->gl_demote_state), dtime,
atomic_read(&gl->gl_ail_count),
atomic_read(&gl->gl_revokes),
(int)gl->gl_lockref.count, gl->gl_hold_time);
list_for_each_entry(gh, &gl->gl_holders, gh_list)
dump_holder(seq, gh);
if (gl->gl_state != LM_ST_UNLOCKED && glops->go_dump)
glops->go_dump(seq, gl);
}
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 11:38:36 +01:00
static int gfs2_glstats_seq_show(struct seq_file *seq, void *iter_ptr)
{
struct gfs2_glock *gl = iter_ptr;
seq_printf(seq, "G: n:%u/%llx rtt:%llu/%llu rttb:%llu/%llu irt:%llu/%llu dcnt: %llu qcnt: %llu\n",
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 11:38:36 +01:00
gl->gl_name.ln_type,
(unsigned long long)gl->gl_name.ln_number,
(unsigned long long)gl->gl_stats.stats[GFS2_LKS_SRTT],
(unsigned long long)gl->gl_stats.stats[GFS2_LKS_SRTTVAR],
(unsigned long long)gl->gl_stats.stats[GFS2_LKS_SRTTB],
(unsigned long long)gl->gl_stats.stats[GFS2_LKS_SRTTVARB],
(unsigned long long)gl->gl_stats.stats[GFS2_LKS_SIRT],
(unsigned long long)gl->gl_stats.stats[GFS2_LKS_SIRTVAR],
(unsigned long long)gl->gl_stats.stats[GFS2_LKS_DCOUNT],
(unsigned long long)gl->gl_stats.stats[GFS2_LKS_QCOUNT]);
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 11:38:36 +01:00
return 0;
}
static const char *gfs2_gltype[] = {
"type",
"reserved",
"nondisk",
"inode",
"rgrp",
"meta",
"iopen",
"flock",
"plock",
"quota",
"journal",
};
static const char *gfs2_stype[] = {
[GFS2_LKS_SRTT] = "srtt",
[GFS2_LKS_SRTTVAR] = "srttvar",
[GFS2_LKS_SRTTB] = "srttb",
[GFS2_LKS_SRTTVARB] = "srttvarb",
[GFS2_LKS_SIRT] = "sirt",
[GFS2_LKS_SIRTVAR] = "sirtvar",
[GFS2_LKS_DCOUNT] = "dlm",
[GFS2_LKS_QCOUNT] = "queue",
};
#define GFS2_NR_SBSTATS (ARRAY_SIZE(gfs2_gltype) * ARRAY_SIZE(gfs2_stype))
static int gfs2_sbstats_seq_show(struct seq_file *seq, void *iter_ptr)
{
struct gfs2_sbd *sdp = seq->private;
loff_t pos = *(loff_t *)iter_ptr;
unsigned index = pos >> 3;
unsigned subindex = pos & 0x07;
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 11:38:36 +01:00
int i;
if (index == 0 && subindex != 0)
return 0;
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 11:38:36 +01:00
seq_printf(seq, "%-10s %8s:", gfs2_gltype[index],
(index == 0) ? "cpu": gfs2_stype[subindex]);
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 11:38:36 +01:00
for_each_possible_cpu(i) {
const struct gfs2_pcpu_lkstats *lkstats = per_cpu_ptr(sdp->sd_lkstats, i);
if (index == 0)
seq_printf(seq, " %15u", i);
else
seq_printf(seq, " %15llu", (unsigned long long)lkstats->
lkstats[index - 1].stats[subindex]);
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 11:38:36 +01:00
}
seq_putc(seq, '\n');
return 0;
}
int __init gfs2_glock_init(void)
{
int ret;
ret = rhashtable_init(&gl_hash_table, &ht_parms);
if (ret < 0)
return ret;
glock_workqueue = alloc_workqueue("glock_workqueue", WQ_MEM_RECLAIM |
WQ_HIGHPRI | WQ_FREEZABLE, 0);
if (!glock_workqueue) {
rhashtable_destroy(&gl_hash_table);
return -ENOMEM;
}
gfs2_delete_workqueue = alloc_workqueue("delete_workqueue",
WQ_MEM_RECLAIM | WQ_FREEZABLE,
0);
if (!gfs2_delete_workqueue) {
destroy_workqueue(glock_workqueue);
rhashtable_destroy(&gl_hash_table);
return -ENOMEM;
}
ret = register_shrinker(&glock_shrinker);
if (ret) {
destroy_workqueue(gfs2_delete_workqueue);
destroy_workqueue(glock_workqueue);
rhashtable_destroy(&gl_hash_table);
return ret;
}
return 0;
}
void gfs2_glock_exit(void)
{
unregister_shrinker(&glock_shrinker);
rhashtable_destroy(&gl_hash_table);
destroy_workqueue(glock_workqueue);
destroy_workqueue(gfs2_delete_workqueue);
}
static void gfs2_glock_iter_next(struct gfs2_glock_iter *gi)
{
do {
gi->gl = rhashtable_walk_next(&gi->hti);
if (IS_ERR(gi->gl)) {
if (PTR_ERR(gi->gl) == -EAGAIN)
continue;
gi->gl = NULL;
}
/* Skip entries for other sb and dead entries */
} while ((gi->gl) && ((gi->sdp != gi->gl->gl_name.ln_sbd) ||
__lockref_is_dead(&gi->gl->gl_lockref)));
}
static void *gfs2_glock_seq_start(struct seq_file *seq, loff_t *pos)
{
struct gfs2_glock_iter *gi = seq->private;
loff_t n = *pos;
int ret;
if (gi->last_pos <= *pos)
n = (*pos - gi->last_pos);
ret = rhashtable_walk_start(&gi->hti);
if (ret)
return NULL;
do {
gfs2_glock_iter_next(gi);
} while (gi->gl && n--);
gi->last_pos = *pos;
return gi->gl;
}
static void *gfs2_glock_seq_next(struct seq_file *seq, void *iter_ptr,
loff_t *pos)
{
struct gfs2_glock_iter *gi = seq->private;
(*pos)++;
gi->last_pos = *pos;
gfs2_glock_iter_next(gi);
return gi->gl;
}
static void gfs2_glock_seq_stop(struct seq_file *seq, void *iter_ptr)
{
struct gfs2_glock_iter *gi = seq->private;
gi->gl = NULL;
rhashtable_walk_stop(&gi->hti);
}
static int gfs2_glock_seq_show(struct seq_file *seq, void *iter_ptr)
{
dump_glock(seq, iter_ptr);
return 0;
}
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 11:38:36 +01:00
static void *gfs2_sbstats_seq_start(struct seq_file *seq, loff_t *pos)
{
preempt_disable();
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 11:38:36 +01:00
if (*pos >= GFS2_NR_SBSTATS)
return NULL;
return pos;
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 11:38:36 +01:00
}
static void *gfs2_sbstats_seq_next(struct seq_file *seq, void *iter_ptr,
loff_t *pos)
{
(*pos)++;
if (*pos >= GFS2_NR_SBSTATS)
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 11:38:36 +01:00
return NULL;
return pos;
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 11:38:36 +01:00
}
static void gfs2_sbstats_seq_stop(struct seq_file *seq, void *iter_ptr)
{
preempt_enable();
}
static const struct seq_operations gfs2_glock_seq_ops = {
.start = gfs2_glock_seq_start,
.next = gfs2_glock_seq_next,
.stop = gfs2_glock_seq_stop,
.show = gfs2_glock_seq_show,
};
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 11:38:36 +01:00
static const struct seq_operations gfs2_glstats_seq_ops = {
.start = gfs2_glock_seq_start,
.next = gfs2_glock_seq_next,
.stop = gfs2_glock_seq_stop,
.show = gfs2_glstats_seq_show,
};
static const struct seq_operations gfs2_sbstats_seq_ops = {
.start = gfs2_sbstats_seq_start,
.next = gfs2_sbstats_seq_next,
.stop = gfs2_sbstats_seq_stop,
.show = gfs2_sbstats_seq_show,
};
#define GFS2_SEQ_GOODSIZE min(PAGE_SIZE << PAGE_ALLOC_COSTLY_ORDER, 65536UL)
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 11:38:36 +01:00
static int gfs2_glocks_open(struct inode *inode, struct file *file)
{
int ret = seq_open_private(file, &gfs2_glock_seq_ops,
sizeof(struct gfs2_glock_iter));
if (ret == 0) {
struct seq_file *seq = file->private_data;
struct gfs2_glock_iter *gi = seq->private;
gi->sdp = inode->i_private;
gi->last_pos = 0;
seq->buf = kmalloc(GFS2_SEQ_GOODSIZE, GFP_KERNEL | __GFP_NOWARN);
if (seq->buf)
seq->size = GFS2_SEQ_GOODSIZE;
gi->gl = NULL;
ret = rhashtable_walk_init(&gl_hash_table, &gi->hti, GFP_KERNEL);
}
return ret;
}
static int gfs2_glocks_release(struct inode *inode, struct file *file)
{
struct seq_file *seq = file->private_data;
struct gfs2_glock_iter *gi = seq->private;
gi->gl = NULL;
rhashtable_walk_exit(&gi->hti);
return seq_release_private(inode, file);
}
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 11:38:36 +01:00
static int gfs2_glstats_open(struct inode *inode, struct file *file)
{
int ret = seq_open_private(file, &gfs2_glstats_seq_ops,
sizeof(struct gfs2_glock_iter));
if (ret == 0) {
struct seq_file *seq = file->private_data;
struct gfs2_glock_iter *gi = seq->private;
gi->sdp = inode->i_private;
gi->last_pos = 0;
seq->buf = kmalloc(GFS2_SEQ_GOODSIZE, GFP_KERNEL | __GFP_NOWARN);
if (seq->buf)
seq->size = GFS2_SEQ_GOODSIZE;
gi->gl = NULL;
ret = rhashtable_walk_init(&gl_hash_table, &gi->hti, GFP_KERNEL);
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 11:38:36 +01:00
}
return ret;
}
static int gfs2_sbstats_open(struct inode *inode, struct file *file)
{
int ret = seq_open(file, &gfs2_sbstats_seq_ops);
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 11:38:36 +01:00
if (ret == 0) {
struct seq_file *seq = file->private_data;
seq->private = inode->i_private; /* sdp */
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 11:38:36 +01:00
}
return ret;
}
static const struct file_operations gfs2_glocks_fops = {
.owner = THIS_MODULE,
.open = gfs2_glocks_open,
.read = seq_read,
.llseek = seq_lseek,
.release = gfs2_glocks_release,
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 11:38:36 +01:00
};
static const struct file_operations gfs2_glstats_fops = {
.owner = THIS_MODULE,
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 11:38:36 +01:00
.open = gfs2_glstats_open,
.read = seq_read,
.llseek = seq_lseek,
.release = gfs2_glocks_release,
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 11:38:36 +01:00
};
static const struct file_operations gfs2_sbstats_fops = {
.owner = THIS_MODULE,
.open = gfs2_sbstats_open,
.read = seq_read,
.llseek = seq_lseek,
.release = seq_release,
};
int gfs2_create_debugfs_file(struct gfs2_sbd *sdp)
{
struct dentry *dent;
dent = debugfs_create_dir(sdp->sd_table_name, gfs2_root);
if (IS_ERR_OR_NULL(dent))
goto fail;
sdp->debugfs_dir = dent;
dent = debugfs_create_file("glocks",
S_IFREG | S_IRUGO,
sdp->debugfs_dir, sdp,
&gfs2_glocks_fops);
if (IS_ERR_OR_NULL(dent))
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 11:38:36 +01:00
goto fail;
sdp->debugfs_dentry_glocks = dent;
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 11:38:36 +01:00
dent = debugfs_create_file("glstats",
S_IFREG | S_IRUGO,
sdp->debugfs_dir, sdp,
&gfs2_glstats_fops);
if (IS_ERR_OR_NULL(dent))
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 11:38:36 +01:00
goto fail;
sdp->debugfs_dentry_glstats = dent;
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 11:38:36 +01:00
dent = debugfs_create_file("sbstats",
S_IFREG | S_IRUGO,
sdp->debugfs_dir, sdp,
&gfs2_sbstats_fops);
if (IS_ERR_OR_NULL(dent))
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 11:38:36 +01:00
goto fail;
sdp->debugfs_dentry_sbstats = dent;
return 0;
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 11:38:36 +01:00
fail:
gfs2_delete_debugfs_file(sdp);
return dent ? PTR_ERR(dent) : -ENOMEM;
}
void gfs2_delete_debugfs_file(struct gfs2_sbd *sdp)
{
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 11:38:36 +01:00
if (sdp->debugfs_dir) {
if (sdp->debugfs_dentry_glocks) {
debugfs_remove(sdp->debugfs_dentry_glocks);
sdp->debugfs_dentry_glocks = NULL;
}
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 11:38:36 +01:00
if (sdp->debugfs_dentry_glstats) {
debugfs_remove(sdp->debugfs_dentry_glstats);
sdp->debugfs_dentry_glstats = NULL;
}
if (sdp->debugfs_dentry_sbstats) {
debugfs_remove(sdp->debugfs_dentry_sbstats);
sdp->debugfs_dentry_sbstats = NULL;
}
debugfs_remove(sdp->debugfs_dir);
sdp->debugfs_dir = NULL;
}
}
int gfs2_register_debugfs(void)
{
gfs2_root = debugfs_create_dir("gfs2", NULL);
if (IS_ERR(gfs2_root))
return PTR_ERR(gfs2_root);
return gfs2_root ? 0 : -ENOMEM;
}
void gfs2_unregister_debugfs(void)
{
debugfs_remove(gfs2_root);
gfs2_root = NULL;
}