OpenE2K/linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
5110e65536
linux/crypto/ctr.c

488 lines
13 KiB
C
Raw Normal View History

[CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-23 02:50:32 +02:00
/*
* CTR: Counter mode
*
* (C) Copyright IBM Corp. 2007 - Joy Latten <latten@us.ibm.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*
*/
#include <crypto/algapi.h>
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
#include <crypto/ctr.h>
crypto: ctr - make rfc3686 asynchronous block cipher Some hardware crypto drivers register asynchronous ctr(aes), which is left unused in IPSEC because rfc3686 template only supports synchronous block ciphers. Some other drivers register rfc3686(ctr(aes)) to workaround this limitation but not all. This patch changes rfc3686 to use asynchronous block ciphers, to allow async ctr(aes) algorithms to be utilized automatically by IPSEC. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2012-12-28 11:04:58 +01:00
#include <crypto/internal/skcipher.h>
[CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-23 02:50:32 +02:00
#include <linux/err.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/random.h>
#include <linux/scatterlist.h>
#include <linux/slab.h>
struct crypto_ctr_ctx {
struct crypto_cipher *child;
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
};
struct crypto_rfc3686_ctx {
crypto: ctr - Use skcipher in rfc3686 This patch converts rfc3686 to use the new skcipher interface as opposed to ablkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-12 07:17:37 +02:00
struct crypto_skcipher *child;
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
u8 nonce[CTR_RFC3686_NONCE_SIZE];
[CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-23 02:50:32 +02:00
};
crypto: ctr - make rfc3686 asynchronous block cipher Some hardware crypto drivers register asynchronous ctr(aes), which is left unused in IPSEC because rfc3686 template only supports synchronous block ciphers. Some other drivers register rfc3686(ctr(aes)) to workaround this limitation but not all. This patch changes rfc3686 to use asynchronous block ciphers, to allow async ctr(aes) algorithms to be utilized automatically by IPSEC. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2012-12-28 11:04:58 +01:00
struct crypto_rfc3686_req_ctx {
u8 iv[CTR_RFC3686_BLOCK_SIZE];
crypto: ctr - Use skcipher in rfc3686 This patch converts rfc3686 to use the new skcipher interface as opposed to ablkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-12 07:17:37 +02:00
struct skcipher_request subreq CRYPTO_MINALIGN_ATTR;
crypto: ctr - make rfc3686 asynchronous block cipher Some hardware crypto drivers register asynchronous ctr(aes), which is left unused in IPSEC because rfc3686 template only supports synchronous block ciphers. Some other drivers register rfc3686(ctr(aes)) to workaround this limitation but not all. This patch changes rfc3686 to use asynchronous block ciphers, to allow async ctr(aes) algorithms to be utilized automatically by IPSEC. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2012-12-28 11:04:58 +01:00
};
[CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-23 02:50:32 +02:00
static int crypto_ctr_setkey(struct crypto_tfm *parent, const u8 *key,
unsigned int keylen)
{
struct crypto_ctr_ctx *ctx = crypto_tfm_ctx(parent);
struct crypto_cipher *child = ctx->child;
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
int err;
[CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-23 02:50:32 +02:00
crypto_cipher_clear_flags(child, CRYPTO_TFM_REQ_MASK);
crypto_cipher_set_flags(child, crypto_tfm_get_flags(parent) &
CRYPTO_TFM_REQ_MASK);
err = crypto_cipher_setkey(child, key, keylen);
crypto_tfm_set_flags(parent, crypto_cipher_get_flags(child) &
CRYPTO_TFM_RES_MASK);
return err;
}
[CRYPTO] ctr: Fix multi-page processing When the data spans across a page boundary, CTR may incorrectly process a partial block in the middle because the blkcipher walking code may supply partial blocks in the middle as long as the total length of the supplied data is more than a block. CTR is supposed to return any unused partial block in that case to the walker. This patch fixes this by doing exactly that, returning partial blocks to the walker unless we received less than a block-worth of data to start with. This also allows us to optimise the bulk of the processing since we no longer have to worry about partial blocks until the very end. Thanks to Tan Swee Heng for fixes and actually testing this :) Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-29 14:23:53 +01:00
static void crypto_ctr_crypt_final(struct blkcipher_walk *walk,
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
struct crypto_cipher *tfm)
[CRYPTO] ctr: Fix multi-page processing When the data spans across a page boundary, CTR may incorrectly process a partial block in the middle because the blkcipher walking code may supply partial blocks in the middle as long as the total length of the supplied data is more than a block. CTR is supposed to return any unused partial block in that case to the walker. This patch fixes this by doing exactly that, returning partial blocks to the walker unless we received less than a block-worth of data to start with. This also allows us to optimise the bulk of the processing since we no longer have to worry about partial blocks until the very end. Thanks to Tan Swee Heng for fixes and actually testing this :) Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-29 14:23:53 +01:00
{
unsigned int bsize = crypto_cipher_blocksize(tfm);
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
unsigned long alignmask = crypto_cipher_alignmask(tfm);
u8 *ctrblk = walk->iv;
u8 tmp[bsize + alignmask];
u8 *keystream = PTR_ALIGN(tmp + 0, alignmask + 1);
[CRYPTO] ctr: Fix multi-page processing When the data spans across a page boundary, CTR may incorrectly process a partial block in the middle because the blkcipher walking code may supply partial blocks in the middle as long as the total length of the supplied data is more than a block. CTR is supposed to return any unused partial block in that case to the walker. This patch fixes this by doing exactly that, returning partial blocks to the walker unless we received less than a block-worth of data to start with. This also allows us to optimise the bulk of the processing since we no longer have to worry about partial blocks until the very end. Thanks to Tan Swee Heng for fixes and actually testing this :) Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-29 14:23:53 +01:00
u8 *src = walk->src.virt.addr;
u8 *dst = walk->dst.virt.addr;
unsigned int nbytes = walk->nbytes;
crypto_cipher_encrypt_one(tfm, keystream, ctrblk);
crypto: algapi - make crypto_xor() take separate dst and src arguments There are quite a number of occurrences in the kernel of the pattern if (dst != src) memcpy(dst, src, walk.total % AES_BLOCK_SIZE); crypto_xor(dst, final, walk.total % AES_BLOCK_SIZE); or crypto_xor(keystream, src, nbytes); memcpy(dst, keystream, nbytes); where crypto_xor() is preceded or followed by a memcpy() invocation that is only there because crypto_xor() uses its output parameter as one of the inputs. To avoid having to add new instances of this pattern in the arm64 code, which will be refactored to implement non-SIMD fallbacks, add an alternative implementation called crypto_xor_cpy(), taking separate input and output arguments. This removes the need for the separate memcpy(). Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-07-24 12:28:04 +02:00
crypto_xor_cpy(dst, keystream, src, nbytes);
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
crypto_inc(ctrblk, bsize);
[CRYPTO] ctr: Fix multi-page processing When the data spans across a page boundary, CTR may incorrectly process a partial block in the middle because the blkcipher walking code may supply partial blocks in the middle as long as the total length of the supplied data is more than a block. CTR is supposed to return any unused partial block in that case to the walker. This patch fixes this by doing exactly that, returning partial blocks to the walker unless we received less than a block-worth of data to start with. This also allows us to optimise the bulk of the processing since we no longer have to worry about partial blocks until the very end. Thanks to Tan Swee Heng for fixes and actually testing this :) Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-29 14:23:53 +01:00
}
[CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-23 02:50:32 +02:00
static int crypto_ctr_crypt_segment(struct blkcipher_walk *walk,
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
struct crypto_cipher *tfm)
[CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-23 02:50:32 +02:00
{
void (*fn)(struct crypto_tfm *, u8 *, const u8 *) =
crypto_cipher_alg(tfm)->cia_encrypt;
unsigned int bsize = crypto_cipher_blocksize(tfm);
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
u8 *ctrblk = walk->iv;
[CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-23 02:50:32 +02:00
u8 *src = walk->src.virt.addr;
u8 *dst = walk->dst.virt.addr;
unsigned int nbytes = walk->nbytes;
do {
/* create keystream */
[CRYPTO] ctr: Fix multi-page processing When the data spans across a page boundary, CTR may incorrectly process a partial block in the middle because the blkcipher walking code may supply partial blocks in the middle as long as the total length of the supplied data is more than a block. CTR is supposed to return any unused partial block in that case to the walker. This patch fixes this by doing exactly that, returning partial blocks to the walker unless we received less than a block-worth of data to start with. This also allows us to optimise the bulk of the processing since we no longer have to worry about partial blocks until the very end. Thanks to Tan Swee Heng for fixes and actually testing this :) Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-29 14:23:53 +01:00
fn(crypto_cipher_tfm(tfm), dst, ctrblk);
crypto_xor(dst, src, bsize);
[CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-23 02:50:32 +02:00
/* increment counter in counterblock */
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
crypto_inc(ctrblk, bsize);
[CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-23 02:50:32 +02:00
src += bsize;
dst += bsize;
[CRYPTO] ctr: Fix multi-page processing When the data spans across a page boundary, CTR may incorrectly process a partial block in the middle because the blkcipher walking code may supply partial blocks in the middle as long as the total length of the supplied data is more than a block. CTR is supposed to return any unused partial block in that case to the walker. This patch fixes this by doing exactly that, returning partial blocks to the walker unless we received less than a block-worth of data to start with. This also allows us to optimise the bulk of the processing since we no longer have to worry about partial blocks until the very end. Thanks to Tan Swee Heng for fixes and actually testing this :) Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-29 14:23:53 +01:00
} while ((nbytes -= bsize) >= bsize);
[CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-23 02:50:32 +02:00
[CRYPTO] ctr: Fix multi-page processing When the data spans across a page boundary, CTR may incorrectly process a partial block in the middle because the blkcipher walking code may supply partial blocks in the middle as long as the total length of the supplied data is more than a block. CTR is supposed to return any unused partial block in that case to the walker. This patch fixes this by doing exactly that, returning partial blocks to the walker unless we received less than a block-worth of data to start with. This also allows us to optimise the bulk of the processing since we no longer have to worry about partial blocks until the very end. Thanks to Tan Swee Heng for fixes and actually testing this :) Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-29 14:23:53 +01:00
return nbytes;
[CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-23 02:50:32 +02:00
}
static int crypto_ctr_crypt_inplace(struct blkcipher_walk *walk,
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
struct crypto_cipher *tfm)
[CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-23 02:50:32 +02:00
{
void (*fn)(struct crypto_tfm *, u8 *, const u8 *) =
crypto_cipher_alg(tfm)->cia_encrypt;
unsigned int bsize = crypto_cipher_blocksize(tfm);
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
unsigned long alignmask = crypto_cipher_alignmask(tfm);
[CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-23 02:50:32 +02:00
unsigned int nbytes = walk->nbytes;
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
u8 *ctrblk = walk->iv;
[CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-23 02:50:32 +02:00
u8 *src = walk->src.virt.addr;
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
u8 tmp[bsize + alignmask];
u8 *keystream = PTR_ALIGN(tmp + 0, alignmask + 1);
[CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-23 02:50:32 +02:00
do {
/* create keystream */
fn(crypto_cipher_tfm(tfm), keystream, ctrblk);
[CRYPTO] ctr: Fix multi-page processing When the data spans across a page boundary, CTR may incorrectly process a partial block in the middle because the blkcipher walking code may supply partial blocks in the middle as long as the total length of the supplied data is more than a block. CTR is supposed to return any unused partial block in that case to the walker. This patch fixes this by doing exactly that, returning partial blocks to the walker unless we received less than a block-worth of data to start with. This also allows us to optimise the bulk of the processing since we no longer have to worry about partial blocks until the very end. Thanks to Tan Swee Heng for fixes and actually testing this :) Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-29 14:23:53 +01:00
crypto_xor(src, keystream, bsize);
[CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-23 02:50:32 +02:00
/* increment counter in counterblock */
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
crypto_inc(ctrblk, bsize);
[CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-23 02:50:32 +02:00
src += bsize;
[CRYPTO] ctr: Fix multi-page processing When the data spans across a page boundary, CTR may incorrectly process a partial block in the middle because the blkcipher walking code may supply partial blocks in the middle as long as the total length of the supplied data is more than a block. CTR is supposed to return any unused partial block in that case to the walker. This patch fixes this by doing exactly that, returning partial blocks to the walker unless we received less than a block-worth of data to start with. This also allows us to optimise the bulk of the processing since we no longer have to worry about partial blocks until the very end. Thanks to Tan Swee Heng for fixes and actually testing this :) Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-29 14:23:53 +01:00
} while ((nbytes -= bsize) >= bsize);
[CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-23 02:50:32 +02:00
[CRYPTO] ctr: Fix multi-page processing When the data spans across a page boundary, CTR may incorrectly process a partial block in the middle because the blkcipher walking code may supply partial blocks in the middle as long as the total length of the supplied data is more than a block. CTR is supposed to return any unused partial block in that case to the walker. This patch fixes this by doing exactly that, returning partial blocks to the walker unless we received less than a block-worth of data to start with. This also allows us to optimise the bulk of the processing since we no longer have to worry about partial blocks until the very end. Thanks to Tan Swee Heng for fixes and actually testing this :) Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-29 14:23:53 +01:00
return nbytes;
[CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-23 02:50:32 +02:00
}
static int crypto_ctr_crypt(struct blkcipher_desc *desc,
struct scatterlist *dst, struct scatterlist *src,
unsigned int nbytes)
{
struct blkcipher_walk walk;
struct crypto_blkcipher *tfm = desc->tfm;
struct crypto_ctr_ctx *ctx = crypto_blkcipher_ctx(tfm);
struct crypto_cipher *child = ctx->child;
unsigned int bsize = crypto_cipher_blocksize(child);
int err;
blkcipher_walk_init(&walk, dst, src, nbytes);
err = blkcipher_walk_virt_block(desc, &walk, bsize);
[CRYPTO] ctr: Fix multi-page processing When the data spans across a page boundary, CTR may incorrectly process a partial block in the middle because the blkcipher walking code may supply partial blocks in the middle as long as the total length of the supplied data is more than a block. CTR is supposed to return any unused partial block in that case to the walker. This patch fixes this by doing exactly that, returning partial blocks to the walker unless we received less than a block-worth of data to start with. This also allows us to optimise the bulk of the processing since we no longer have to worry about partial blocks until the very end. Thanks to Tan Swee Heng for fixes and actually testing this :) Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-29 14:23:53 +01:00
while (walk.nbytes >= bsize) {
[CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-23 02:50:32 +02:00
if (walk.src.virt.addr == walk.dst.virt.addr)
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
nbytes = crypto_ctr_crypt_inplace(&walk, child);
[CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-23 02:50:32 +02:00
else
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
nbytes = crypto_ctr_crypt_segment(&walk, child);
[CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-23 02:50:32 +02:00
err = blkcipher_walk_done(desc, &walk, nbytes);
}
[CRYPTO] ctr: Fix multi-page processing When the data spans across a page boundary, CTR may incorrectly process a partial block in the middle because the blkcipher walking code may supply partial blocks in the middle as long as the total length of the supplied data is more than a block. CTR is supposed to return any unused partial block in that case to the walker. This patch fixes this by doing exactly that, returning partial blocks to the walker unless we received less than a block-worth of data to start with. This also allows us to optimise the bulk of the processing since we no longer have to worry about partial blocks until the very end. Thanks to Tan Swee Heng for fixes and actually testing this :) Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-29 14:23:53 +01:00
if (walk.nbytes) {
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
crypto_ctr_crypt_final(&walk, child);
[CRYPTO] ctr: Fix multi-page processing When the data spans across a page boundary, CTR may incorrectly process a partial block in the middle because the blkcipher walking code may supply partial blocks in the middle as long as the total length of the supplied data is more than a block. CTR is supposed to return any unused partial block in that case to the walker. This patch fixes this by doing exactly that, returning partial blocks to the walker unless we received less than a block-worth of data to start with. This also allows us to optimise the bulk of the processing since we no longer have to worry about partial blocks until the very end. Thanks to Tan Swee Heng for fixes and actually testing this :) Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-29 14:23:53 +01:00
err = blkcipher_walk_done(desc, &walk, 0);
}
[CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-23 02:50:32 +02:00
return err;
}
static int crypto_ctr_init_tfm(struct crypto_tfm *tfm)
{
struct crypto_instance *inst = (void *)tfm->__crt_alg;
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
struct crypto_spawn *spawn = crypto_instance_ctx(inst);
[CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-23 02:50:32 +02:00
struct crypto_ctr_ctx *ctx = crypto_tfm_ctx(tfm);
struct crypto_cipher *cipher;
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
cipher = crypto_spawn_cipher(spawn);
[CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-23 02:50:32 +02:00
if (IS_ERR(cipher))
return PTR_ERR(cipher);
ctx->child = cipher;
return 0;
}
static void crypto_ctr_exit_tfm(struct crypto_tfm *tfm)
{
struct crypto_ctr_ctx *ctx = crypto_tfm_ctx(tfm);
crypto_free_cipher(ctx->child);
}
static struct crypto_instance *crypto_ctr_alloc(struct rtattr **tb)
{
struct crypto_instance *inst;
crypto: ctr - Propagate NEED_FALLBACK bit When requesting a fallback algorithm, we should propagate the NEED_FALLBACK bit when search for the underlying algorithm. This will prevents drivers from allocating unnecessary fallbacks that are never called. For instance, currently the vmx-crypto driver will use the following chain of calls when calling the fallback implementation: p8_aes_ctr -> ctr(p8_aes) -> aes-generic However p8_aes will always delegate its calls to aes-generic. With this patch, p8_aes_ctr will be able to use ctr(aes-generic) directly as its fallback. The same applies to aes_s390. Signed-off-by: Marcelo Henrique Cerri <marcelo.cerri@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-27 13:38:26 +01:00
struct crypto_attr_type *algt;
[CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-23 02:50:32 +02:00
struct crypto_alg *alg;
crypto: ctr - Propagate NEED_FALLBACK bit When requesting a fallback algorithm, we should propagate the NEED_FALLBACK bit when search for the underlying algorithm. This will prevents drivers from allocating unnecessary fallbacks that are never called. For instance, currently the vmx-crypto driver will use the following chain of calls when calling the fallback implementation: p8_aes_ctr -> ctr(p8_aes) -> aes-generic However p8_aes will always delegate its calls to aes-generic. With this patch, p8_aes_ctr will be able to use ctr(aes-generic) directly as its fallback. The same applies to aes_s390. Signed-off-by: Marcelo Henrique Cerri <marcelo.cerri@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-27 13:38:26 +01:00
u32 mask;
[CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-23 02:50:32 +02:00
int err;
err = crypto_check_attr_type(tb, CRYPTO_ALG_TYPE_BLKCIPHER);
if (err)
return ERR_PTR(err);
crypto: ctr - Propagate NEED_FALLBACK bit When requesting a fallback algorithm, we should propagate the NEED_FALLBACK bit when search for the underlying algorithm. This will prevents drivers from allocating unnecessary fallbacks that are never called. For instance, currently the vmx-crypto driver will use the following chain of calls when calling the fallback implementation: p8_aes_ctr -> ctr(p8_aes) -> aes-generic However p8_aes will always delegate its calls to aes-generic. With this patch, p8_aes_ctr will be able to use ctr(aes-generic) directly as its fallback. The same applies to aes_s390. Signed-off-by: Marcelo Henrique Cerri <marcelo.cerri@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-27 13:38:26 +01:00
algt = crypto_get_attr_type(tb);
if (IS_ERR(algt))
return ERR_CAST(algt);
mask = CRYPTO_ALG_TYPE_MASK |
crypto_requires_off(algt->type, algt->mask,
CRYPTO_ALG_NEED_FALLBACK);
alg = crypto_attr_alg(tb[1], CRYPTO_ALG_TYPE_CIPHER, mask);
[CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-23 02:50:32 +02:00
if (IS_ERR(alg))
crypto: Use ERR_CAST Use ERR_CAST(x) rather than ERR_PTR(PTR_ERR(x)). The former makes more clear what is the purpose of the operation, which otherwise looks like a no-op. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ type T; T x; identifier f; @@ T f (...) { <+... - ERR_PTR(PTR_ERR(x)) + x ...+> } @@ expression x; @@ - ERR_PTR(PTR_ERR(x)) + ERR_CAST(x) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-05-26 02:36:51 +02:00
return ERR_CAST(alg);
[CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-23 02:50:32 +02:00
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
/* Block size must be >= 4 bytes. */
[CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-23 02:50:32 +02:00
err = -EINVAL;
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
if (alg->cra_blocksize < 4)
[CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-23 02:50:32 +02:00
goto out_put_alg;
[CRYPTO] ctr: Use crypto_inc and crypto_xor This patch replaces the custom inc/xor in CTR with the generic functions. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-20 13:32:56 +01:00
/* If this is false we'd fail the alignment of crypto_inc. */
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
if (alg->cra_blocksize % 4)
[CRYPTO] ctr: Use crypto_inc and crypto_xor This patch replaces the custom inc/xor in CTR with the generic functions. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-20 13:32:56 +01:00
goto out_put_alg;
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
inst = crypto_alloc_instance("ctr", alg);
if (IS_ERR(inst))
goto out;
[CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-23 02:50:32 +02:00
inst->alg.cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER;
inst->alg.cra_priority = alg->cra_priority;
inst->alg.cra_blocksize = 1;
crypto: algapi - make crypto_xor() and crypto_inc() alignment agnostic Instead of unconditionally forcing 4 byte alignment for all generic chaining modes that rely on crypto_xor() or crypto_inc() (which may result in unnecessary copying of data when the underlying hardware can perform unaligned accesses efficiently), make those functions deal with unaligned input explicitly, but only if the Kconfig symbol HAVE_EFFICIENT_UNALIGNED_ACCESS is set. This will allow us to drop the alignmasks from the CBC, CMAC, CTR, CTS, PCBC and SEQIV drivers. For crypto_inc(), this simply involves making the 4-byte stride conditional on HAVE_EFFICIENT_UNALIGNED_ACCESS being set, given that it typically operates on 16 byte buffers. For crypto_xor(), an algorithm is implemented that simply runs through the input using the largest strides possible if unaligned accesses are allowed. If they are not, an optimal sequence of memory accesses is emitted that takes the relative alignment of the input buffers into account, e.g., if the relative misalignment of dst and src is 4 bytes, the entire xor operation will be completed using 4 byte loads and stores (modulo unaligned bits at the start and end). Note that all expressions involving misalign are simply eliminated by the compiler when HAVE_EFFICIENT_UNALIGNED_ACCESS is defined. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-05 11:06:12 +01:00
inst->alg.cra_alignmask = alg->cra_alignmask;
[CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-23 02:50:32 +02:00
inst->alg.cra_type = &crypto_blkcipher_type;
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
inst->alg.cra_blkcipher.ivsize = alg->cra_blocksize;
inst->alg.cra_blkcipher.min_keysize = alg->cra_cipher.cia_min_keysize;
inst->alg.cra_blkcipher.max_keysize = alg->cra_cipher.cia_max_keysize;
[CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-23 02:50:32 +02:00
inst->alg.cra_ctxsize = sizeof(struct crypto_ctr_ctx);
inst->alg.cra_init = crypto_ctr_init_tfm;
inst->alg.cra_exit = crypto_ctr_exit_tfm;
inst->alg.cra_blkcipher.setkey = crypto_ctr_setkey;
inst->alg.cra_blkcipher.encrypt = crypto_ctr_crypt;
inst->alg.cra_blkcipher.decrypt = crypto_ctr_crypt;
crypto: ctr - Use chainiv on raw counter mode Raw counter mode only works with chainiv, which is no longer the default IV generator on SMP machines. This broke raw counter mode as it can no longer instantiate as a givcipher. This patch fixes it by always picking chainiv on raw counter mode. This is based on the diagnosis and a patch by Huang Ying. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-08-13 15:10:39 +02:00
inst->alg.cra_blkcipher.geniv = "chainiv";
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
out:
[CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-23 02:50:32 +02:00
crypto_mod_put(alg);
return inst;
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
out_put_alg:
inst = ERR_PTR(err);
goto out;
[CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-23 02:50:32 +02:00
}
static void crypto_ctr_free(struct crypto_instance *inst)
{
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
crypto_drop_spawn(crypto_instance_ctx(inst));
[CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-23 02:50:32 +02:00
kfree(inst);
}
static struct crypto_template crypto_ctr_tmpl = {
.name = "ctr",
.alloc = crypto_ctr_alloc,
.free = crypto_ctr_free,
.module = THIS_MODULE,
};
crypto: ctr - Use skcipher in rfc3686 This patch converts rfc3686 to use the new skcipher interface as opposed to ablkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-12 07:17:37 +02:00
static int crypto_rfc3686_setkey(struct crypto_skcipher *parent,
crypto: ctr - make rfc3686 asynchronous block cipher Some hardware crypto drivers register asynchronous ctr(aes), which is left unused in IPSEC because rfc3686 template only supports synchronous block ciphers. Some other drivers register rfc3686(ctr(aes)) to workaround this limitation but not all. This patch changes rfc3686 to use asynchronous block ciphers, to allow async ctr(aes) algorithms to be utilized automatically by IPSEC. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2012-12-28 11:04:58 +01:00
const u8 *key, unsigned int keylen)
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
{
crypto: ctr - Use skcipher in rfc3686 This patch converts rfc3686 to use the new skcipher interface as opposed to ablkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-12 07:17:37 +02:00
struct crypto_rfc3686_ctx *ctx = crypto_skcipher_ctx(parent);
struct crypto_skcipher *child = ctx->child;
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
int err;
/* the nonce is stored in bytes at end of key */
if (keylen < CTR_RFC3686_NONCE_SIZE)
return -EINVAL;
memcpy(ctx->nonce, key + (keylen - CTR_RFC3686_NONCE_SIZE),
CTR_RFC3686_NONCE_SIZE);
keylen -= CTR_RFC3686_NONCE_SIZE;
crypto: ctr - Use skcipher in rfc3686 This patch converts rfc3686 to use the new skcipher interface as opposed to ablkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-12 07:17:37 +02:00
crypto_skcipher_clear_flags(child, CRYPTO_TFM_REQ_MASK);
crypto_skcipher_set_flags(child, crypto_skcipher_get_flags(parent) &
CRYPTO_TFM_REQ_MASK);
err = crypto_skcipher_setkey(child, key, keylen);
crypto_skcipher_set_flags(parent, crypto_skcipher_get_flags(child) &
CRYPTO_TFM_RES_MASK);
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
return err;
}
crypto: ctr - Use skcipher in rfc3686 This patch converts rfc3686 to use the new skcipher interface as opposed to ablkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-12 07:17:37 +02:00
static int crypto_rfc3686_crypt(struct skcipher_request *req)
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
{
crypto: ctr - Use skcipher in rfc3686 This patch converts rfc3686 to use the new skcipher interface as opposed to ablkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-12 07:17:37 +02:00
struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
struct crypto_rfc3686_ctx *ctx = crypto_skcipher_ctx(tfm);
struct crypto_skcipher *child = ctx->child;
unsigned long align = crypto_skcipher_alignmask(tfm);
crypto: ctr - make rfc3686 asynchronous block cipher Some hardware crypto drivers register asynchronous ctr(aes), which is left unused in IPSEC because rfc3686 template only supports synchronous block ciphers. Some other drivers register rfc3686(ctr(aes)) to workaround this limitation but not all. This patch changes rfc3686 to use asynchronous block ciphers, to allow async ctr(aes) algorithms to be utilized automatically by IPSEC. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2012-12-28 11:04:58 +01:00
struct crypto_rfc3686_req_ctx *rctx =
crypto: ctr - Use skcipher in rfc3686 This patch converts rfc3686 to use the new skcipher interface as opposed to ablkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-12 07:17:37 +02:00
(void *)PTR_ALIGN((u8 *)skcipher_request_ctx(req), align + 1);
struct skcipher_request *subreq = &rctx->subreq;
crypto: ctr - make rfc3686 asynchronous block cipher Some hardware crypto drivers register asynchronous ctr(aes), which is left unused in IPSEC because rfc3686 template only supports synchronous block ciphers. Some other drivers register rfc3686(ctr(aes)) to workaround this limitation but not all. This patch changes rfc3686 to use asynchronous block ciphers, to allow async ctr(aes) algorithms to be utilized automatically by IPSEC. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2012-12-28 11:04:58 +01:00
u8 *iv = rctx->iv;
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
/* set up counter block */
memcpy(iv, ctx->nonce, CTR_RFC3686_NONCE_SIZE);
crypto: ctr - Use skcipher in rfc3686 This patch converts rfc3686 to use the new skcipher interface as opposed to ablkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-12 07:17:37 +02:00
memcpy(iv + CTR_RFC3686_NONCE_SIZE, req->iv, CTR_RFC3686_IV_SIZE);
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
/* initialize counter portion of counter block */
*(__be32 *)(iv + CTR_RFC3686_NONCE_SIZE + CTR_RFC3686_IV_SIZE) =
cpu_to_be32(1);
crypto: ctr - Use skcipher in rfc3686 This patch converts rfc3686 to use the new skcipher interface as opposed to ablkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-12 07:17:37 +02:00
skcipher_request_set_tfm(subreq, child);
skcipher_request_set_callback(subreq, req->base.flags,
req->base.complete, req->base.data);
skcipher_request_set_crypt(subreq, req->src, req->dst,
req->cryptlen, iv);
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
crypto: ctr - Use skcipher in rfc3686 This patch converts rfc3686 to use the new skcipher interface as opposed to ablkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-12 07:17:37 +02:00
return crypto_skcipher_encrypt(subreq);
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
}
crypto: ctr - Use skcipher in rfc3686 This patch converts rfc3686 to use the new skcipher interface as opposed to ablkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-12 07:17:37 +02:00
static int crypto_rfc3686_init_tfm(struct crypto_skcipher *tfm)
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
{
crypto: ctr - Use skcipher in rfc3686 This patch converts rfc3686 to use the new skcipher interface as opposed to ablkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-12 07:17:37 +02:00
struct skcipher_instance *inst = skcipher_alg_instance(tfm);
struct crypto_skcipher_spawn *spawn = skcipher_instance_ctx(inst);
struct crypto_rfc3686_ctx *ctx = crypto_skcipher_ctx(tfm);
struct crypto_skcipher *cipher;
crypto: ctr - make rfc3686 asynchronous block cipher Some hardware crypto drivers register asynchronous ctr(aes), which is left unused in IPSEC because rfc3686 template only supports synchronous block ciphers. Some other drivers register rfc3686(ctr(aes)) to workaround this limitation but not all. This patch changes rfc3686 to use asynchronous block ciphers, to allow async ctr(aes) algorithms to be utilized automatically by IPSEC. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2012-12-28 11:04:58 +01:00
unsigned long align;
crypto: ctr - Use skcipher in rfc3686 This patch converts rfc3686 to use the new skcipher interface as opposed to ablkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-12 07:17:37 +02:00
unsigned int reqsize;
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
crypto: skcipher - Get rid of crypto_spawn_skcipher2() Since commit 3a01d0ee2b99 ("crypto: skcipher - Remove top-level givcipher interface"), crypto_spawn_skcipher2() and crypto_spawn_skcipher() are equivalent. So switch callers of crypto_spawn_skcipher2() to crypto_spawn_skcipher() and remove it. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-10-28 18:52:19 +02:00
cipher = crypto_spawn_skcipher(spawn);
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
if (IS_ERR(cipher))
return PTR_ERR(cipher);
ctx->child = cipher;
crypto: ctr - Use skcipher in rfc3686 This patch converts rfc3686 to use the new skcipher interface as opposed to ablkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-12 07:17:37 +02:00
align = crypto_skcipher_alignmask(tfm);
crypto: ctr - make rfc3686 asynchronous block cipher Some hardware crypto drivers register asynchronous ctr(aes), which is left unused in IPSEC because rfc3686 template only supports synchronous block ciphers. Some other drivers register rfc3686(ctr(aes)) to workaround this limitation but not all. This patch changes rfc3686 to use asynchronous block ciphers, to allow async ctr(aes) algorithms to be utilized automatically by IPSEC. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2012-12-28 11:04:58 +01:00
align &= ~(crypto_tfm_ctx_alignment() - 1);
crypto: ctr - Use skcipher in rfc3686 This patch converts rfc3686 to use the new skcipher interface as opposed to ablkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-12 07:17:37 +02:00
reqsize = align + sizeof(struct crypto_rfc3686_req_ctx) +
crypto_skcipher_reqsize(cipher);
crypto_skcipher_set_reqsize(tfm, reqsize);
crypto: ctr - make rfc3686 asynchronous block cipher Some hardware crypto drivers register asynchronous ctr(aes), which is left unused in IPSEC because rfc3686 template only supports synchronous block ciphers. Some other drivers register rfc3686(ctr(aes)) to workaround this limitation but not all. This patch changes rfc3686 to use asynchronous block ciphers, to allow async ctr(aes) algorithms to be utilized automatically by IPSEC. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2012-12-28 11:04:58 +01:00
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
return 0;
}
crypto: ctr - Use skcipher in rfc3686 This patch converts rfc3686 to use the new skcipher interface as opposed to ablkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-12 07:17:37 +02:00
static void crypto_rfc3686_exit_tfm(struct crypto_skcipher *tfm)
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
{
crypto: ctr - Use skcipher in rfc3686 This patch converts rfc3686 to use the new skcipher interface as opposed to ablkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-12 07:17:37 +02:00
struct crypto_rfc3686_ctx *ctx = crypto_skcipher_ctx(tfm);
crypto_free_skcipher(ctx->child);
}
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
crypto: ctr - Use skcipher in rfc3686 This patch converts rfc3686 to use the new skcipher interface as opposed to ablkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-12 07:17:37 +02:00
static void crypto_rfc3686_free(struct skcipher_instance *inst)
{
struct crypto_skcipher_spawn *spawn = skcipher_instance_ctx(inst);
crypto_drop_skcipher(spawn);
kfree(inst);
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
}
crypto: ctr - Use skcipher in rfc3686 This patch converts rfc3686 to use the new skcipher interface as opposed to ablkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-12 07:17:37 +02:00
static int crypto_rfc3686_create(struct crypto_template *tmpl,
struct rtattr **tb)
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
{
crypto: ctr - make rfc3686 asynchronous block cipher Some hardware crypto drivers register asynchronous ctr(aes), which is left unused in IPSEC because rfc3686 template only supports synchronous block ciphers. Some other drivers register rfc3686(ctr(aes)) to workaround this limitation but not all. This patch changes rfc3686 to use asynchronous block ciphers, to allow async ctr(aes) algorithms to be utilized automatically by IPSEC. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2012-12-28 11:04:58 +01:00
struct crypto_attr_type *algt;
crypto: ctr - Use skcipher in rfc3686 This patch converts rfc3686 to use the new skcipher interface as opposed to ablkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-12 07:17:37 +02:00
struct skcipher_instance *inst;
struct skcipher_alg *alg;
crypto: ctr - make rfc3686 asynchronous block cipher Some hardware crypto drivers register asynchronous ctr(aes), which is left unused in IPSEC because rfc3686 template only supports synchronous block ciphers. Some other drivers register rfc3686(ctr(aes)) to workaround this limitation but not all. This patch changes rfc3686 to use asynchronous block ciphers, to allow async ctr(aes) algorithms to be utilized automatically by IPSEC. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2012-12-28 11:04:58 +01:00
struct crypto_skcipher_spawn *spawn;
const char *cipher_name;
crypto: ctr - Propagate NEED_FALLBACK bit When requesting a fallback algorithm, we should propagate the NEED_FALLBACK bit when search for the underlying algorithm. This will prevents drivers from allocating unnecessary fallbacks that are never called. For instance, currently the vmx-crypto driver will use the following chain of calls when calling the fallback implementation: p8_aes_ctr -> ctr(p8_aes) -> aes-generic However p8_aes will always delegate its calls to aes-generic. With this patch, p8_aes_ctr will be able to use ctr(aes-generic) directly as its fallback. The same applies to aes_s390. Signed-off-by: Marcelo Henrique Cerri <marcelo.cerri@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-27 13:38:26 +01:00
u32 mask;
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
int err;
crypto: ctr - make rfc3686 asynchronous block cipher Some hardware crypto drivers register asynchronous ctr(aes), which is left unused in IPSEC because rfc3686 template only supports synchronous block ciphers. Some other drivers register rfc3686(ctr(aes)) to workaround this limitation but not all. This patch changes rfc3686 to use asynchronous block ciphers, to allow async ctr(aes) algorithms to be utilized automatically by IPSEC. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2012-12-28 11:04:58 +01:00
algt = crypto_get_attr_type(tb);
if (IS_ERR(algt))
crypto: ctr - Use skcipher in rfc3686 This patch converts rfc3686 to use the new skcipher interface as opposed to ablkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-12 07:17:37 +02:00
return PTR_ERR(algt);
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
crypto: ctr - Use skcipher in rfc3686 This patch converts rfc3686 to use the new skcipher interface as opposed to ablkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-12 07:17:37 +02:00
if ((algt->type ^ CRYPTO_ALG_TYPE_SKCIPHER) & algt->mask)
return -EINVAL;
crypto: ctr - make rfc3686 asynchronous block cipher Some hardware crypto drivers register asynchronous ctr(aes), which is left unused in IPSEC because rfc3686 template only supports synchronous block ciphers. Some other drivers register rfc3686(ctr(aes)) to workaround this limitation but not all. This patch changes rfc3686 to use asynchronous block ciphers, to allow async ctr(aes) algorithms to be utilized automatically by IPSEC. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2012-12-28 11:04:58 +01:00
cipher_name = crypto_attr_alg_name(tb[1]);
if (IS_ERR(cipher_name))
crypto: ctr - Use skcipher in rfc3686 This patch converts rfc3686 to use the new skcipher interface as opposed to ablkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-12 07:17:37 +02:00
return PTR_ERR(cipher_name);
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
crypto: ctr - make rfc3686 asynchronous block cipher Some hardware crypto drivers register asynchronous ctr(aes), which is left unused in IPSEC because rfc3686 template only supports synchronous block ciphers. Some other drivers register rfc3686(ctr(aes)) to workaround this limitation but not all. This patch changes rfc3686 to use asynchronous block ciphers, to allow async ctr(aes) algorithms to be utilized automatically by IPSEC. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2012-12-28 11:04:58 +01:00
inst = kzalloc(sizeof(*inst) + sizeof(*spawn), GFP_KERNEL);
if (!inst)
crypto: ctr - Use skcipher in rfc3686 This patch converts rfc3686 to use the new skcipher interface as opposed to ablkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-12 07:17:37 +02:00
return -ENOMEM;
crypto: ctr - make rfc3686 asynchronous block cipher Some hardware crypto drivers register asynchronous ctr(aes), which is left unused in IPSEC because rfc3686 template only supports synchronous block ciphers. Some other drivers register rfc3686(ctr(aes)) to workaround this limitation but not all. This patch changes rfc3686 to use asynchronous block ciphers, to allow async ctr(aes) algorithms to be utilized automatically by IPSEC. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2012-12-28 11:04:58 +01:00
crypto: ctr - Propagate NEED_FALLBACK bit When requesting a fallback algorithm, we should propagate the NEED_FALLBACK bit when search for the underlying algorithm. This will prevents drivers from allocating unnecessary fallbacks that are never called. For instance, currently the vmx-crypto driver will use the following chain of calls when calling the fallback implementation: p8_aes_ctr -> ctr(p8_aes) -> aes-generic However p8_aes will always delegate its calls to aes-generic. With this patch, p8_aes_ctr will be able to use ctr(aes-generic) directly as its fallback. The same applies to aes_s390. Signed-off-by: Marcelo Henrique Cerri <marcelo.cerri@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-27 13:38:26 +01:00
mask = crypto_requires_sync(algt->type, algt->mask) |
crypto_requires_off(algt->type, algt->mask,
CRYPTO_ALG_NEED_FALLBACK);
crypto: ctr - Use skcipher in rfc3686 This patch converts rfc3686 to use the new skcipher interface as opposed to ablkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-12 07:17:37 +02:00
spawn = skcipher_instance_ctx(inst);
crypto: ctr - make rfc3686 asynchronous block cipher Some hardware crypto drivers register asynchronous ctr(aes), which is left unused in IPSEC because rfc3686 template only supports synchronous block ciphers. Some other drivers register rfc3686(ctr(aes)) to workaround this limitation but not all. This patch changes rfc3686 to use asynchronous block ciphers, to allow async ctr(aes) algorithms to be utilized automatically by IPSEC. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2012-12-28 11:04:58 +01:00
crypto: ctr - Use skcipher in rfc3686 This patch converts rfc3686 to use the new skcipher interface as opposed to ablkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-12 07:17:37 +02:00
crypto_set_skcipher_spawn(spawn, skcipher_crypto_instance(inst));
crypto: ctr - Propagate NEED_FALLBACK bit When requesting a fallback algorithm, we should propagate the NEED_FALLBACK bit when search for the underlying algorithm. This will prevents drivers from allocating unnecessary fallbacks that are never called. For instance, currently the vmx-crypto driver will use the following chain of calls when calling the fallback implementation: p8_aes_ctr -> ctr(p8_aes) -> aes-generic However p8_aes will always delegate its calls to aes-generic. With this patch, p8_aes_ctr will be able to use ctr(aes-generic) directly as its fallback. The same applies to aes_s390. Signed-off-by: Marcelo Henrique Cerri <marcelo.cerri@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-27 13:38:26 +01:00
err = crypto_grab_skcipher(spawn, cipher_name, 0, mask);
crypto: ctr - make rfc3686 asynchronous block cipher Some hardware crypto drivers register asynchronous ctr(aes), which is left unused in IPSEC because rfc3686 template only supports synchronous block ciphers. Some other drivers register rfc3686(ctr(aes)) to workaround this limitation but not all. This patch changes rfc3686 to use asynchronous block ciphers, to allow async ctr(aes) algorithms to be utilized automatically by IPSEC. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2012-12-28 11:04:58 +01:00
if (err)
goto err_free_inst;
crypto: ctr - Use skcipher in rfc3686 This patch converts rfc3686 to use the new skcipher interface as opposed to ablkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-12 07:17:37 +02:00
alg = crypto_spawn_skcipher_alg(spawn);
crypto: ctr - make rfc3686 asynchronous block cipher Some hardware crypto drivers register asynchronous ctr(aes), which is left unused in IPSEC because rfc3686 template only supports synchronous block ciphers. Some other drivers register rfc3686(ctr(aes)) to workaround this limitation but not all. This patch changes rfc3686 to use asynchronous block ciphers, to allow async ctr(aes) algorithms to be utilized automatically by IPSEC. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2012-12-28 11:04:58 +01:00
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
/* We only support 16-byte blocks. */
err = -EINVAL;
crypto: ctr - Use skcipher in rfc3686 This patch converts rfc3686 to use the new skcipher interface as opposed to ablkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-12 07:17:37 +02:00
if (crypto_skcipher_alg_ivsize(alg) != CTR_RFC3686_BLOCK_SIZE)
crypto: ctr - make rfc3686 asynchronous block cipher Some hardware crypto drivers register asynchronous ctr(aes), which is left unused in IPSEC because rfc3686 template only supports synchronous block ciphers. Some other drivers register rfc3686(ctr(aes)) to workaround this limitation but not all. This patch changes rfc3686 to use asynchronous block ciphers, to allow async ctr(aes) algorithms to be utilized automatically by IPSEC. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2012-12-28 11:04:58 +01:00
goto err_drop_spawn;
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
/* Not a stream cipher? */
crypto: ctr - Use skcipher in rfc3686 This patch converts rfc3686 to use the new skcipher interface as opposed to ablkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-12 07:17:37 +02:00
if (alg->base.cra_blocksize != 1)
crypto: ctr - make rfc3686 asynchronous block cipher Some hardware crypto drivers register asynchronous ctr(aes), which is left unused in IPSEC because rfc3686 template only supports synchronous block ciphers. Some other drivers register rfc3686(ctr(aes)) to workaround this limitation but not all. This patch changes rfc3686 to use asynchronous block ciphers, to allow async ctr(aes) algorithms to be utilized automatically by IPSEC. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2012-12-28 11:04:58 +01:00
goto err_drop_spawn;
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
crypto: ctr - make rfc3686 asynchronous block cipher Some hardware crypto drivers register asynchronous ctr(aes), which is left unused in IPSEC because rfc3686 template only supports synchronous block ciphers. Some other drivers register rfc3686(ctr(aes)) to workaround this limitation but not all. This patch changes rfc3686 to use asynchronous block ciphers, to allow async ctr(aes) algorithms to be utilized automatically by IPSEC. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2012-12-28 11:04:58 +01:00
err = -ENAMETOOLONG;
crypto: ctr - Use skcipher in rfc3686 This patch converts rfc3686 to use the new skcipher interface as opposed to ablkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-12 07:17:37 +02:00
if (snprintf(inst->alg.base.cra_name, CRYPTO_MAX_ALG_NAME,
"rfc3686(%s)", alg->base.cra_name) >= CRYPTO_MAX_ALG_NAME)
crypto: ctr - make rfc3686 asynchronous block cipher Some hardware crypto drivers register asynchronous ctr(aes), which is left unused in IPSEC because rfc3686 template only supports synchronous block ciphers. Some other drivers register rfc3686(ctr(aes)) to workaround this limitation but not all. This patch changes rfc3686 to use asynchronous block ciphers, to allow async ctr(aes) algorithms to be utilized automatically by IPSEC. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2012-12-28 11:04:58 +01:00
goto err_drop_spawn;
crypto: ctr - Use skcipher in rfc3686 This patch converts rfc3686 to use the new skcipher interface as opposed to ablkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-12 07:17:37 +02:00
if (snprintf(inst->alg.base.cra_driver_name, CRYPTO_MAX_ALG_NAME,
"rfc3686(%s)", alg->base.cra_driver_name) >=
CRYPTO_MAX_ALG_NAME)
crypto: ctr - make rfc3686 asynchronous block cipher Some hardware crypto drivers register asynchronous ctr(aes), which is left unused in IPSEC because rfc3686 template only supports synchronous block ciphers. Some other drivers register rfc3686(ctr(aes)) to workaround this limitation but not all. This patch changes rfc3686 to use asynchronous block ciphers, to allow async ctr(aes) algorithms to be utilized automatically by IPSEC. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2012-12-28 11:04:58 +01:00
goto err_drop_spawn;
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
crypto: ctr - Use skcipher in rfc3686 This patch converts rfc3686 to use the new skcipher interface as opposed to ablkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-12 07:17:37 +02:00
inst->alg.base.cra_priority = alg->base.cra_priority;
inst->alg.base.cra_blocksize = 1;
inst->alg.base.cra_alignmask = alg->base.cra_alignmask;
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
crypto: ctr - Use skcipher in rfc3686 This patch converts rfc3686 to use the new skcipher interface as opposed to ablkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-12 07:17:37 +02:00
inst->alg.base.cra_flags = alg->base.cra_flags & CRYPTO_ALG_ASYNC;
crypto: ctr - make rfc3686 asynchronous block cipher Some hardware crypto drivers register asynchronous ctr(aes), which is left unused in IPSEC because rfc3686 template only supports synchronous block ciphers. Some other drivers register rfc3686(ctr(aes)) to workaround this limitation but not all. This patch changes rfc3686 to use asynchronous block ciphers, to allow async ctr(aes) algorithms to be utilized automatically by IPSEC. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2012-12-28 11:04:58 +01:00
crypto: ctr - Use skcipher in rfc3686 This patch converts rfc3686 to use the new skcipher interface as opposed to ablkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-12 07:17:37 +02:00
inst->alg.ivsize = CTR_RFC3686_IV_SIZE;
inst->alg.chunksize = crypto_skcipher_alg_chunksize(alg);
inst->alg.min_keysize = crypto_skcipher_alg_min_keysize(alg) +
CTR_RFC3686_NONCE_SIZE;
inst->alg.max_keysize = crypto_skcipher_alg_max_keysize(alg) +
CTR_RFC3686_NONCE_SIZE;
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
crypto: ctr - Use skcipher in rfc3686 This patch converts rfc3686 to use the new skcipher interface as opposed to ablkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-12 07:17:37 +02:00
inst->alg.setkey = crypto_rfc3686_setkey;
inst->alg.encrypt = crypto_rfc3686_crypt;
inst->alg.decrypt = crypto_rfc3686_crypt;
crypto: ctr - make rfc3686 asynchronous block cipher Some hardware crypto drivers register asynchronous ctr(aes), which is left unused in IPSEC because rfc3686 template only supports synchronous block ciphers. Some other drivers register rfc3686(ctr(aes)) to workaround this limitation but not all. This patch changes rfc3686 to use asynchronous block ciphers, to allow async ctr(aes) algorithms to be utilized automatically by IPSEC. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2012-12-28 11:04:58 +01:00
crypto: ctr - Use skcipher in rfc3686 This patch converts rfc3686 to use the new skcipher interface as opposed to ablkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-12 07:17:37 +02:00
inst->alg.base.cra_ctxsize = sizeof(struct crypto_rfc3686_ctx);
[CRYPTO] seqiv: Add Sequence Number IV Generator This generator generates an IV based on a sequence number by xoring it with a salt. This algorithm is mainly useful for CTR and similar modes. This patch also sets it as the default IV generator for ctr. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-30 11:38:37 +01:00
crypto: ctr - Use skcipher in rfc3686 This patch converts rfc3686 to use the new skcipher interface as opposed to ablkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-12 07:17:37 +02:00
inst->alg.init = crypto_rfc3686_init_tfm;
inst->alg.exit = crypto_rfc3686_exit_tfm;
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
crypto: ctr - Use skcipher in rfc3686 This patch converts rfc3686 to use the new skcipher interface as opposed to ablkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-12 07:17:37 +02:00
inst->free = crypto_rfc3686_free;
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
crypto: ctr - Use skcipher in rfc3686 This patch converts rfc3686 to use the new skcipher interface as opposed to ablkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-12 07:17:37 +02:00
err = skcipher_register_instance(tmpl, inst);
if (err)
goto err_drop_spawn;
out:
return err;
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
crypto: ctr - make rfc3686 asynchronous block cipher Some hardware crypto drivers register asynchronous ctr(aes), which is left unused in IPSEC because rfc3686 template only supports synchronous block ciphers. Some other drivers register rfc3686(ctr(aes)) to workaround this limitation but not all. This patch changes rfc3686 to use asynchronous block ciphers, to allow async ctr(aes) algorithms to be utilized automatically by IPSEC. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2012-12-28 11:04:58 +01:00
err_drop_spawn:
crypto_drop_skcipher(spawn);
err_free_inst:
kfree(inst);
crypto: ctr - Use skcipher in rfc3686 This patch converts rfc3686 to use the new skcipher interface as opposed to ablkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-12 07:17:37 +02:00
goto out;
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
}
static struct crypto_template crypto_rfc3686_tmpl = {
.name = "rfc3686",
crypto: ctr - Use skcipher in rfc3686 This patch converts rfc3686 to use the new skcipher interface as opposed to ablkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-12 07:17:37 +02:00
.create = crypto_rfc3686_create,
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
.module = THIS_MODULE,
};
[CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-23 02:50:32 +02:00
static int __init crypto_ctr_module_init(void)
{
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
int err;
err = crypto_register_template(&crypto_ctr_tmpl);
if (err)
goto out;
err = crypto_register_template(&crypto_rfc3686_tmpl);
if (err)
goto out_drop_ctr;
out:
return err;
out_drop_ctr:
crypto_unregister_template(&crypto_ctr_tmpl);
goto out;
[CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-23 02:50:32 +02:00
}
static void __exit crypto_ctr_module_exit(void)
{
[CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 14:34:32 +01:00
crypto_unregister_template(&crypto_rfc3686_tmpl);
[CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-23 02:50:32 +02:00
crypto_unregister_template(&crypto_ctr_tmpl);
}
module_init(crypto_ctr_module_init);
module_exit(crypto_ctr_module_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("CTR Counter block mode");
crypto: prefix module autoloading with "crypto-" This prefixes all crypto module loading with "crypto-" so we never run the risk of exposing module auto-loading to userspace via a crypto API, as demonstrated by Mathias Krause: https://lkml.org/lkml/2013/3/4/70 Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-11-21 02:05:53 +01:00
MODULE_ALIAS_CRYPTO("rfc3686");
crypto: include crypto- module prefix in template This adds the module loading prefix "crypto-" to the template lookup as well. For example, attempting to load 'vfat(blowfish)' via AF_ALG now correctly includes the "crypto-" prefix at every level, correctly rejecting "vfat": net-pf-38 algif-hash crypto-vfat(blowfish) crypto-vfat(blowfish)-all crypto-vfat Reported-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-11-25 01:32:38 +01:00
MODULE_ALIAS_CRYPTO("ctr");
Reference in New Issue Copy Permalink