linux/arch/powerpc/include/asm/opal-api.h

933 lines
24 KiB
C
Raw Normal View History

/*
* OPAL API definitions.
*
* Copyright 2011-2015 IBM Corp.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#ifndef __OPAL_API_H
#define __OPAL_API_H
/****** OPAL APIs ******/
/* Return codes */
#define OPAL_SUCCESS 0
#define OPAL_PARAMETER -1
#define OPAL_BUSY -2
#define OPAL_PARTIAL -3
#define OPAL_CONSTRAINED -4
#define OPAL_CLOSED -5
#define OPAL_HARDWARE -6
#define OPAL_UNSUPPORTED -7
#define OPAL_PERMISSION -8
#define OPAL_NO_MEM -9
#define OPAL_RESOURCE -10
#define OPAL_INTERNAL_ERROR -11
#define OPAL_BUSY_EVENT -12
#define OPAL_HARDWARE_FROZEN -13
#define OPAL_WRONG_STATE -14
#define OPAL_ASYNC_COMPLETION -15
#define OPAL_EMPTY -16
#define OPAL_I2C_TIMEOUT -17
#define OPAL_I2C_INVALID_CMD -18
#define OPAL_I2C_LBUS_PARITY -19
#define OPAL_I2C_BKEND_OVERRUN -20
#define OPAL_I2C_BKEND_ACCESS -21
#define OPAL_I2C_ARBT_LOST -22
#define OPAL_I2C_NACK_RCVD -23
#define OPAL_I2C_STOP_ERR -24
/* API Tokens (in r0) */
#define OPAL_INVALID_CALL -1
#define OPAL_TEST 0
#define OPAL_CONSOLE_WRITE 1
#define OPAL_CONSOLE_READ 2
#define OPAL_RTC_READ 3
#define OPAL_RTC_WRITE 4
#define OPAL_CEC_POWER_DOWN 5
#define OPAL_CEC_REBOOT 6
#define OPAL_READ_NVRAM 7
#define OPAL_WRITE_NVRAM 8
#define OPAL_HANDLE_INTERRUPT 9
#define OPAL_POLL_EVENTS 10
#define OPAL_PCI_SET_HUB_TCE_MEMORY 11
#define OPAL_PCI_SET_PHB_TCE_MEMORY 12
#define OPAL_PCI_CONFIG_READ_BYTE 13
#define OPAL_PCI_CONFIG_READ_HALF_WORD 14
#define OPAL_PCI_CONFIG_READ_WORD 15
#define OPAL_PCI_CONFIG_WRITE_BYTE 16
#define OPAL_PCI_CONFIG_WRITE_HALF_WORD 17
#define OPAL_PCI_CONFIG_WRITE_WORD 18
#define OPAL_SET_XIVE 19
#define OPAL_GET_XIVE 20
#define OPAL_GET_COMPLETION_TOKEN_STATUS 21 /* obsolete */
#define OPAL_REGISTER_OPAL_EXCEPTION_HANDLER 22
#define OPAL_PCI_EEH_FREEZE_STATUS 23
#define OPAL_PCI_SHPC 24
#define OPAL_CONSOLE_WRITE_BUFFER_SPACE 25
#define OPAL_PCI_EEH_FREEZE_CLEAR 26
#define OPAL_PCI_PHB_MMIO_ENABLE 27
#define OPAL_PCI_SET_PHB_MEM_WINDOW 28
#define OPAL_PCI_MAP_PE_MMIO_WINDOW 29
#define OPAL_PCI_SET_PHB_TABLE_MEMORY 30
#define OPAL_PCI_SET_PE 31
#define OPAL_PCI_SET_PELTV 32
#define OPAL_PCI_SET_MVE 33
#define OPAL_PCI_SET_MVE_ENABLE 34
#define OPAL_PCI_GET_XIVE_REISSUE 35
#define OPAL_PCI_SET_XIVE_REISSUE 36
#define OPAL_PCI_SET_XIVE_PE 37
#define OPAL_GET_XIVE_SOURCE 38
#define OPAL_GET_MSI_32 39
#define OPAL_GET_MSI_64 40
#define OPAL_START_CPU 41
#define OPAL_QUERY_CPU_STATUS 42
#define OPAL_WRITE_OPPANEL 43 /* unimplemented */
#define OPAL_PCI_MAP_PE_DMA_WINDOW 44
#define OPAL_PCI_MAP_PE_DMA_WINDOW_REAL 45
#define OPAL_PCI_RESET 49
#define OPAL_PCI_GET_HUB_DIAG_DATA 50
#define OPAL_PCI_GET_PHB_DIAG_DATA 51
#define OPAL_PCI_FENCE_PHB 52
#define OPAL_PCI_REINIT 53
#define OPAL_PCI_MASK_PE_ERROR 54
#define OPAL_SET_SLOT_LED_STATUS 55
#define OPAL_GET_EPOW_STATUS 56
#define OPAL_SET_SYSTEM_ATTENTION_LED 57
#define OPAL_RESERVED1 58
#define OPAL_RESERVED2 59
#define OPAL_PCI_NEXT_ERROR 60
#define OPAL_PCI_EEH_FREEZE_STATUS2 61
#define OPAL_PCI_POLL 62
#define OPAL_PCI_MSI_EOI 63
#define OPAL_PCI_GET_PHB_DIAG_DATA2 64
#define OPAL_XSCOM_READ 65
#define OPAL_XSCOM_WRITE 66
#define OPAL_LPC_READ 67
#define OPAL_LPC_WRITE 68
#define OPAL_RETURN_CPU 69
#define OPAL_REINIT_CPUS 70
#define OPAL_ELOG_READ 71
#define OPAL_ELOG_WRITE 72
#define OPAL_ELOG_ACK 73
#define OPAL_ELOG_RESEND 74
#define OPAL_ELOG_SIZE 75
#define OPAL_FLASH_VALIDATE 76
#define OPAL_FLASH_MANAGE 77
#define OPAL_FLASH_UPDATE 78
#define OPAL_RESYNC_TIMEBASE 79
#define OPAL_CHECK_TOKEN 80
#define OPAL_DUMP_INIT 81
#define OPAL_DUMP_INFO 82
#define OPAL_DUMP_READ 83
#define OPAL_DUMP_ACK 84
#define OPAL_GET_MSG 85
#define OPAL_CHECK_ASYNC_COMPLETION 86
#define OPAL_SYNC_HOST_REBOOT 87
#define OPAL_SENSOR_READ 88
#define OPAL_GET_PARAM 89
#define OPAL_SET_PARAM 90
#define OPAL_DUMP_RESEND 91
#define OPAL_ELOG_SEND 92 /* Deprecated */
#define OPAL_PCI_SET_PHB_CAPI_MODE 93
#define OPAL_DUMP_INFO2 94
#define OPAL_WRITE_OPPANEL_ASYNC 95
#define OPAL_PCI_ERR_INJECT 96
#define OPAL_PCI_EEH_FREEZE_SET 97
#define OPAL_HANDLE_HMI 98
#define OPAL_CONFIG_CPU_IDLE_STATE 99
#define OPAL_SLW_SET_REG 100
#define OPAL_REGISTER_DUMP_REGION 101
#define OPAL_UNREGISTER_DUMP_REGION 102
#define OPAL_WRITE_TPO 103
#define OPAL_READ_TPO 104
#define OPAL_GET_DPO_STATUS 105
#define OPAL_OLD_I2C_REQUEST 106 /* Deprecated */
#define OPAL_IPMI_SEND 107
#define OPAL_IPMI_RECV 108
#define OPAL_I2C_REQUEST 109
#define OPAL_FLASH_READ 110
#define OPAL_FLASH_WRITE 111
#define OPAL_FLASH_ERASE 112
#define OPAL_PRD_MSG 113
#define OPAL_LEDS_GET_INDICATOR 114
#define OPAL_LEDS_SET_INDICATOR 115
#define OPAL_CEC_REBOOT2 116
powerpc/powernv: Add a kmsg_dumper that flushes console output on panic On BMC machines, console output is controlled by the OPAL firmware and is only flushed when its pollers are called. When the kernel is in a panic state, it no longer calls these pollers and thus console output does not completely flush, causing some output from the panic to be lost. Output is only actually lost when the kernel is configured to not power off or reboot after panic (i.e. CONFIG_PANIC_TIMEOUT is set to 0) since OPAL flushes the console buffer as part of its power down routines. Before this patch, however, only partial output would be printed during the timeout wait. This patch adds a new kmsg_dumper which gets called at panic time to ensure panic output is not lost. It accomplishes this by calling OPAL_CONSOLE_FLUSH in the OPAL API, and if that is not available, the pollers are called enough times to (hopefully) completely flush the buffer. The flushing mechanism will only affect output printed at and before the kmsg_dump call in kernel/panic.c:panic(). As such, the "end Kernel panic" message may still be truncated as follows: >Call Trace: >[c000000f1f603b00] [c0000000008e9458] dump_stack+0x90/0xbc (unreliable) >[c000000f1f603b30] [c0000000008e7e78] panic+0xf8/0x2c4 >[c000000f1f603bc0] [c000000000be4860] mount_block_root+0x288/0x33c >[c000000f1f603c80] [c000000000be4d14] prepare_namespace+0x1f4/0x254 >[c000000f1f603d00] [c000000000be43e8] kernel_init_freeable+0x318/0x350 >[c000000f1f603dc0] [c00000000000bd74] kernel_init+0x24/0x130 >[c000000f1f603e30] [c0000000000095b0] ret_from_kernel_thread+0x5c/0xac >---[ end Kernel panic - not This functionality is implemented as a kmsg_dumper as it seems to be the most sensible way to introduce platform-specific functionality to the panic function. Signed-off-by: Russell Currey <ruscur@russell.cc> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-11-27 07:23:07 +01:00
#define OPAL_CONSOLE_FLUSH 117
#define OPAL_GET_DEVICE_TREE 118
#define OPAL_PCI_GET_PRESENCE_STATE 119
#define OPAL_PCI_GET_POWER_STATE 120
#define OPAL_PCI_SET_POWER_STATE 121
#define OPAL_INT_GET_XIRR 122
#define OPAL_INT_SET_CPPR 123
#define OPAL_INT_EOI 124
#define OPAL_INT_SET_MFRR 125
#define OPAL_PCI_TCE_KILL 126
#define OPAL_LAST 126
/* Device tree flags */
/*
* Flags set in power-mgmt nodes in device tree describing
* idle states that are supported in the platform.
*/
#define OPAL_PM_TIMEBASE_STOP 0x00000002
#define OPAL_PM_LOSE_HYP_CONTEXT 0x00002000
#define OPAL_PM_LOSE_FULL_CONTEXT 0x00004000
#define OPAL_PM_NAP_ENABLED 0x00010000
#define OPAL_PM_SLEEP_ENABLED 0x00020000
#define OPAL_PM_WINKLE_ENABLED 0x00040000
#define OPAL_PM_SLEEP_ENABLED_ER1 0x00080000 /* with workaround */
#define OPAL_PM_STOP_INST_FAST 0x00100000
#define OPAL_PM_STOP_INST_DEEP 0x00200000
powerpc/powernv: Introduce sysfs control for fastsleep workaround behavior Fastsleep is one of the idle state which cpuidle subsystem currently uses on power8 machines. In this state L2 cache is brought down to a threshold voltage. Therefore when the core is in fastsleep, the communication between L2 and L3 needs to be fenced. But there is a bug in the current power8 chips surrounding this fencing. OPAL provides a workaround which precludes the possibility of hitting this bug. But running with this workaround applied causes checkstop if any correctable error in L2 cache directory is detected. Hence OPAL also provides a way to undo the workaround. In the existing implementation, workaround is applied by the last thread of the core entering fastsleep and undone by the first thread waking up. But this has a performance cost. These OPAL calls account for roughly 4000 cycles everytime the core has to enter or wakeup from fastsleep. This patch introduces a sysfs attribute (fastsleep_workaround_applyonce) to choose the behavior of this workaround. By default, fastsleep_workaround_applyonce = 0. In this case, workaround is applied/undone everytime the core enters/exits fastsleep. fastsleep_workaround_applyonce = 1. In this case the workaround is applied once on all the cores and never undone. This can be triggered by echo 1 > /sys/devices/system/cpu/fastsleep_workaround_applyonce For simplicity this attribute can be modified only once. Implying, once fastsleep_workaround_applyonce is changed to 1, it cannot be reverted to the default state. Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-04-20 07:02:58 +02:00
/*
* OPAL_CONFIG_CPU_IDLE_STATE parameters
*/
#define OPAL_CONFIG_IDLE_FASTSLEEP 1
#define OPAL_CONFIG_IDLE_UNDO 0
#define OPAL_CONFIG_IDLE_APPLY 1
#ifndef __ASSEMBLY__
/* Other enums */
enum OpalFreezeState {
OPAL_EEH_STOPPED_NOT_FROZEN = 0,
OPAL_EEH_STOPPED_MMIO_FREEZE = 1,
OPAL_EEH_STOPPED_DMA_FREEZE = 2,
OPAL_EEH_STOPPED_MMIO_DMA_FREEZE = 3,
OPAL_EEH_STOPPED_RESET = 4,
OPAL_EEH_STOPPED_TEMP_UNAVAIL = 5,
OPAL_EEH_STOPPED_PERM_UNAVAIL = 6
};
enum OpalEehFreezeActionToken {
OPAL_EEH_ACTION_CLEAR_FREEZE_MMIO = 1,
OPAL_EEH_ACTION_CLEAR_FREEZE_DMA = 2,
OPAL_EEH_ACTION_CLEAR_FREEZE_ALL = 3,
OPAL_EEH_ACTION_SET_FREEZE_MMIO = 1,
OPAL_EEH_ACTION_SET_FREEZE_DMA = 2,
OPAL_EEH_ACTION_SET_FREEZE_ALL = 3
};
enum OpalPciStatusToken {
OPAL_EEH_NO_ERROR = 0,
OPAL_EEH_IOC_ERROR = 1,
OPAL_EEH_PHB_ERROR = 2,
OPAL_EEH_PE_ERROR = 3,
OPAL_EEH_PE_MMIO_ERROR = 4,
OPAL_EEH_PE_DMA_ERROR = 5
};
enum OpalPciErrorSeverity {
OPAL_EEH_SEV_NO_ERROR = 0,
OPAL_EEH_SEV_IOC_DEAD = 1,
OPAL_EEH_SEV_PHB_DEAD = 2,
OPAL_EEH_SEV_PHB_FENCED = 3,
OPAL_EEH_SEV_PE_ER = 4,
OPAL_EEH_SEV_INF = 5
};
enum OpalErrinjectType {
OPAL_ERR_INJECT_TYPE_IOA_BUS_ERR = 0,
OPAL_ERR_INJECT_TYPE_IOA_BUS_ERR64 = 1,
};
enum OpalErrinjectFunc {
/* IOA bus specific errors */
OPAL_ERR_INJECT_FUNC_IOA_LD_MEM_ADDR = 0,
OPAL_ERR_INJECT_FUNC_IOA_LD_MEM_DATA = 1,
OPAL_ERR_INJECT_FUNC_IOA_LD_IO_ADDR = 2,
OPAL_ERR_INJECT_FUNC_IOA_LD_IO_DATA = 3,
OPAL_ERR_INJECT_FUNC_IOA_LD_CFG_ADDR = 4,
OPAL_ERR_INJECT_FUNC_IOA_LD_CFG_DATA = 5,
OPAL_ERR_INJECT_FUNC_IOA_ST_MEM_ADDR = 6,
OPAL_ERR_INJECT_FUNC_IOA_ST_MEM_DATA = 7,
OPAL_ERR_INJECT_FUNC_IOA_ST_IO_ADDR = 8,
OPAL_ERR_INJECT_FUNC_IOA_ST_IO_DATA = 9,
OPAL_ERR_INJECT_FUNC_IOA_ST_CFG_ADDR = 10,
OPAL_ERR_INJECT_FUNC_IOA_ST_CFG_DATA = 11,
OPAL_ERR_INJECT_FUNC_IOA_DMA_RD_ADDR = 12,
OPAL_ERR_INJECT_FUNC_IOA_DMA_RD_DATA = 13,
OPAL_ERR_INJECT_FUNC_IOA_DMA_RD_MASTER = 14,
OPAL_ERR_INJECT_FUNC_IOA_DMA_RD_TARGET = 15,
OPAL_ERR_INJECT_FUNC_IOA_DMA_WR_ADDR = 16,
OPAL_ERR_INJECT_FUNC_IOA_DMA_WR_DATA = 17,
OPAL_ERR_INJECT_FUNC_IOA_DMA_WR_MASTER = 18,
OPAL_ERR_INJECT_FUNC_IOA_DMA_WR_TARGET = 19,
};
enum OpalMmioWindowType {
OPAL_M32_WINDOW_TYPE = 1,
OPAL_M64_WINDOW_TYPE = 2,
OPAL_IO_WINDOW_TYPE = 3
};
enum OpalExceptionHandler {
OPAL_MACHINE_CHECK_HANDLER = 1,
OPAL_HYPERVISOR_MAINTENANCE_HANDLER = 2,
OPAL_SOFTPATCH_HANDLER = 3
};
enum OpalPendingState {
OPAL_EVENT_OPAL_INTERNAL = 0x1,
OPAL_EVENT_NVRAM = 0x2,
OPAL_EVENT_RTC = 0x4,
OPAL_EVENT_CONSOLE_OUTPUT = 0x8,
OPAL_EVENT_CONSOLE_INPUT = 0x10,
OPAL_EVENT_ERROR_LOG_AVAIL = 0x20,
OPAL_EVENT_ERROR_LOG = 0x40,
OPAL_EVENT_EPOW = 0x80,
OPAL_EVENT_LED_STATUS = 0x100,
OPAL_EVENT_PCI_ERROR = 0x200,
OPAL_EVENT_DUMP_AVAIL = 0x400,
OPAL_EVENT_MSG_PENDING = 0x800,
};
enum OpalThreadStatus {
OPAL_THREAD_INACTIVE = 0x0,
OPAL_THREAD_STARTED = 0x1,
OPAL_THREAD_UNAVAILABLE = 0x2 /* opal-v3 */
};
enum OpalPciBusCompare {
OpalPciBusAny = 0, /* Any bus number match */
OpalPciBus3Bits = 2, /* Match top 3 bits of bus number */
OpalPciBus4Bits = 3, /* Match top 4 bits of bus number */
OpalPciBus5Bits = 4, /* Match top 5 bits of bus number */
OpalPciBus6Bits = 5, /* Match top 6 bits of bus number */
OpalPciBus7Bits = 6, /* Match top 7 bits of bus number */
OpalPciBusAll = 7, /* Match bus number exactly */
};
enum OpalDeviceCompare {
OPAL_IGNORE_RID_DEVICE_NUMBER = 0,
OPAL_COMPARE_RID_DEVICE_NUMBER = 1
};
enum OpalFuncCompare {
OPAL_IGNORE_RID_FUNCTION_NUMBER = 0,
OPAL_COMPARE_RID_FUNCTION_NUMBER = 1
};
enum OpalPeAction {
OPAL_UNMAP_PE = 0,
OPAL_MAP_PE = 1
};
enum OpalPeltvAction {
OPAL_REMOVE_PE_FROM_DOMAIN = 0,
OPAL_ADD_PE_TO_DOMAIN = 1
};
enum OpalMveEnableAction {
OPAL_DISABLE_MVE = 0,
OPAL_ENABLE_MVE = 1
};
enum OpalM64Action {
OPAL_DISABLE_M64 = 0,
OPAL_ENABLE_M64_SPLIT = 1,
OPAL_ENABLE_M64_NON_SPLIT = 2
};
enum OpalPciResetScope {
OPAL_RESET_PHB_COMPLETE = 1,
OPAL_RESET_PCI_LINK = 2,
OPAL_RESET_PHB_ERROR = 3,
OPAL_RESET_PCI_HOT = 4,
OPAL_RESET_PCI_FUNDAMENTAL = 5,
OPAL_RESET_PCI_IODA_TABLE = 6
};
enum OpalPciReinitScope {
/*
* Note: we chose values that do not overlap
* OpalPciResetScope as OPAL v2 used the same
* enum for both
*/
OPAL_REINIT_PCI_DEV = 1000
};
enum OpalPciResetState {
OPAL_DEASSERT_RESET = 0,
OPAL_ASSERT_RESET = 1
};
enum OpalPciSlotPresence {
OPAL_PCI_SLOT_EMPTY = 0,
OPAL_PCI_SLOT_PRESENT = 1
};
enum OpalPciSlotPower {
OPAL_PCI_SLOT_POWER_OFF = 0,
OPAL_PCI_SLOT_POWER_ON = 1,
OPAL_PCI_SLOT_OFFLINE = 2,
OPAL_PCI_SLOT_ONLINE = 3
};
enum OpalSlotLedType {
OPAL_SLOT_LED_TYPE_ID = 0, /* IDENTIFY LED */
OPAL_SLOT_LED_TYPE_FAULT = 1, /* FAULT LED */
OPAL_SLOT_LED_TYPE_ATTN = 2, /* System Attention LED */
OPAL_SLOT_LED_TYPE_MAX = 3
};
enum OpalSlotLedState {
OPAL_SLOT_LED_STATE_OFF = 0, /* LED is OFF */
OPAL_SLOT_LED_STATE_ON = 1 /* LED is ON */
};
/*
* Address cycle types for LPC accesses. These also correspond
* to the content of the first cell of the "reg" property for
* device nodes on the LPC bus
*/
enum OpalLPCAddressType {
OPAL_LPC_MEM = 0,
OPAL_LPC_IO = 1,
OPAL_LPC_FW = 2,
};
enum opal_msg_type {
OPAL_MSG_ASYNC_COMP = 0, /* params[0] = token, params[1] = rc,
* additional params function-specific
*/
OPAL_MSG_MEM_ERR = 1,
OPAL_MSG_EPOW = 2,
OPAL_MSG_SHUTDOWN = 3, /* params[0] = 1 reboot, 0 shutdown */
OPAL_MSG_HMI_EVT = 4,
OPAL_MSG_DPO = 5,
OPAL_MSG_PRD = 6,
OPAL_MSG_OCC = 7,
OPAL_MSG_TYPE_MAX,
};
struct opal_msg {
__be32 msg_type;
__be32 reserved;
__be64 params[8];
};
/* System parameter permission */
enum OpalSysparamPerm {
OPAL_SYSPARAM_READ = 0x1,
OPAL_SYSPARAM_WRITE = 0x2,
OPAL_SYSPARAM_RW = (OPAL_SYSPARAM_READ | OPAL_SYSPARAM_WRITE),
};
enum {
OPAL_IPMI_MSG_FORMAT_VERSION_1 = 1,
};
struct opal_ipmi_msg {
uint8_t version;
uint8_t netfn;
uint8_t cmd;
uint8_t data[];
};
/* FSP memory errors handling */
enum OpalMemErr_Version {
OpalMemErr_V1 = 1,
};
enum OpalMemErrType {
OPAL_MEM_ERR_TYPE_RESILIENCE = 0,
OPAL_MEM_ERR_TYPE_DYN_DALLOC,
};
/* Memory Reilience error type */
enum OpalMemErr_ResilErrType {
OPAL_MEM_RESILIENCE_CE = 0,
OPAL_MEM_RESILIENCE_UE,
OPAL_MEM_RESILIENCE_UE_SCRUB,
};
/* Dynamic Memory Deallocation type */
enum OpalMemErr_DynErrType {
OPAL_MEM_DYNAMIC_DEALLOC = 0,
};
struct OpalMemoryErrorData {
enum OpalMemErr_Version version:8; /* 0x00 */
enum OpalMemErrType type:8; /* 0x01 */
__be16 flags; /* 0x02 */
uint8_t reserved_1[4]; /* 0x04 */
union {
/* Memory Resilience corrected/uncorrected error info */
struct {
enum OpalMemErr_ResilErrType resil_err_type:8;
uint8_t reserved_1[7];
__be64 physical_address_start;
__be64 physical_address_end;
} resilience;
/* Dynamic memory deallocation error info */
struct {
enum OpalMemErr_DynErrType dyn_err_type:8;
uint8_t reserved_1[7];
__be64 physical_address_start;
__be64 physical_address_end;
} dyn_dealloc;
} u;
};
/* HMI interrupt event */
enum OpalHMI_Version {
OpalHMIEvt_V1 = 1,
OpalHMIEvt_V2 = 2,
};
enum OpalHMI_Severity {
OpalHMI_SEV_NO_ERROR = 0,
OpalHMI_SEV_WARNING = 1,
OpalHMI_SEV_ERROR_SYNC = 2,
OpalHMI_SEV_FATAL = 3,
};
enum OpalHMI_Disposition {
OpalHMI_DISPOSITION_RECOVERED = 0,
OpalHMI_DISPOSITION_NOT_RECOVERED = 1,
};
enum OpalHMI_ErrType {
OpalHMI_ERROR_MALFUNC_ALERT = 0,
OpalHMI_ERROR_PROC_RECOV_DONE,
OpalHMI_ERROR_PROC_RECOV_DONE_AGAIN,
OpalHMI_ERROR_PROC_RECOV_MASKED,
OpalHMI_ERROR_TFAC,
OpalHMI_ERROR_TFMR_PARITY,
OpalHMI_ERROR_HA_OVERFLOW_WARN,
OpalHMI_ERROR_XSCOM_FAIL,
OpalHMI_ERROR_XSCOM_DONE,
OpalHMI_ERROR_SCOM_FIR,
OpalHMI_ERROR_DEBUG_TRIG_FIR,
OpalHMI_ERROR_HYP_RESOURCE,
OpalHMI_ERROR_CAPP_RECOVERY,
};
enum OpalHMI_XstopType {
CHECKSTOP_TYPE_UNKNOWN = 0,
CHECKSTOP_TYPE_CORE = 1,
CHECKSTOP_TYPE_NX = 2,
};
enum OpalHMI_CoreXstopReason {
CORE_CHECKSTOP_IFU_REGFILE = 0x00000001,
CORE_CHECKSTOP_IFU_LOGIC = 0x00000002,
CORE_CHECKSTOP_PC_DURING_RECOV = 0x00000004,
CORE_CHECKSTOP_ISU_REGFILE = 0x00000008,
CORE_CHECKSTOP_ISU_LOGIC = 0x00000010,
CORE_CHECKSTOP_FXU_LOGIC = 0x00000020,
CORE_CHECKSTOP_VSU_LOGIC = 0x00000040,
CORE_CHECKSTOP_PC_RECOV_IN_MAINT_MODE = 0x00000080,
CORE_CHECKSTOP_LSU_REGFILE = 0x00000100,
CORE_CHECKSTOP_PC_FWD_PROGRESS = 0x00000200,
CORE_CHECKSTOP_LSU_LOGIC = 0x00000400,
CORE_CHECKSTOP_PC_LOGIC = 0x00000800,
CORE_CHECKSTOP_PC_HYP_RESOURCE = 0x00001000,
CORE_CHECKSTOP_PC_HANG_RECOV_FAILED = 0x00002000,
CORE_CHECKSTOP_PC_AMBI_HANG_DETECTED = 0x00004000,
CORE_CHECKSTOP_PC_DEBUG_TRIG_ERR_INJ = 0x00008000,
CORE_CHECKSTOP_PC_SPRD_HYP_ERR_INJ = 0x00010000,
};
enum OpalHMI_NestAccelXstopReason {
NX_CHECKSTOP_SHM_INVAL_STATE_ERR = 0x00000001,
NX_CHECKSTOP_DMA_INVAL_STATE_ERR_1 = 0x00000002,
NX_CHECKSTOP_DMA_INVAL_STATE_ERR_2 = 0x00000004,
NX_CHECKSTOP_DMA_CH0_INVAL_STATE_ERR = 0x00000008,
NX_CHECKSTOP_DMA_CH1_INVAL_STATE_ERR = 0x00000010,
NX_CHECKSTOP_DMA_CH2_INVAL_STATE_ERR = 0x00000020,
NX_CHECKSTOP_DMA_CH3_INVAL_STATE_ERR = 0x00000040,
NX_CHECKSTOP_DMA_CH4_INVAL_STATE_ERR = 0x00000080,
NX_CHECKSTOP_DMA_CH5_INVAL_STATE_ERR = 0x00000100,
NX_CHECKSTOP_DMA_CH6_INVAL_STATE_ERR = 0x00000200,
NX_CHECKSTOP_DMA_CH7_INVAL_STATE_ERR = 0x00000400,
NX_CHECKSTOP_DMA_CRB_UE = 0x00000800,
NX_CHECKSTOP_DMA_CRB_SUE = 0x00001000,
NX_CHECKSTOP_PBI_ISN_UE = 0x00002000,
};
struct OpalHMIEvent {
uint8_t version; /* 0x00 */
uint8_t severity; /* 0x01 */
uint8_t type; /* 0x02 */
uint8_t disposition; /* 0x03 */
uint8_t reserved_1[4]; /* 0x04 */
__be64 hmer;
/* TFMR register. Valid only for TFAC and TFMR_PARITY error type. */
__be64 tfmr;
/* version 2 and later */
union {
/*
* checkstop info (Core/NX).
* Valid for OpalHMI_ERROR_MALFUNC_ALERT.
*/
struct {
uint8_t xstop_type; /* enum OpalHMI_XstopType */
uint8_t reserved_1[3];
__be32 xstop_reason;
union {
__be32 pir; /* for CHECKSTOP_TYPE_CORE */
__be32 chip_id; /* for CHECKSTOP_TYPE_NX */
} u;
} xstop_error;
} u;
};
enum {
OPAL_P7IOC_DIAG_TYPE_NONE = 0,
OPAL_P7IOC_DIAG_TYPE_RGC = 1,
OPAL_P7IOC_DIAG_TYPE_BI = 2,
OPAL_P7IOC_DIAG_TYPE_CI = 3,
OPAL_P7IOC_DIAG_TYPE_MISC = 4,
OPAL_P7IOC_DIAG_TYPE_I2C = 5,
OPAL_P7IOC_DIAG_TYPE_LAST = 6
};
struct OpalIoP7IOCErrorData {
__be16 type;
/* GEM */
__be64 gemXfir;
__be64 gemRfir;
__be64 gemRirqfir;
__be64 gemMask;
__be64 gemRwof;
/* LEM */
__be64 lemFir;
__be64 lemErrMask;
__be64 lemAction0;
__be64 lemAction1;
__be64 lemWof;
union {
struct OpalIoP7IOCRgcErrorData {
__be64 rgcStatus; /* 3E1C10 */
__be64 rgcLdcp; /* 3E1C18 */
}rgc;
struct OpalIoP7IOCBiErrorData {
__be64 biLdcp0; /* 3C0100, 3C0118 */
__be64 biLdcp1; /* 3C0108, 3C0120 */
__be64 biLdcp2; /* 3C0110, 3C0128 */
__be64 biFenceStatus; /* 3C0130, 3C0130 */
uint8_t biDownbound; /* BI Downbound or Upbound */
}bi;
struct OpalIoP7IOCCiErrorData {
__be64 ciPortStatus; /* 3Dn008 */
__be64 ciPortLdcp; /* 3Dn010 */
uint8_t ciPort; /* Index of CI port: 0/1 */
}ci;
};
};
/**
* This structure defines the overlay which will be used to store PHB error
* data upon request.
*/
enum {
OPAL_PHB_ERROR_DATA_VERSION_1 = 1,
};
enum {
OPAL_PHB_ERROR_DATA_TYPE_P7IOC = 1,
OPAL_PHB_ERROR_DATA_TYPE_PHB3 = 2
};
enum {
OPAL_P7IOC_NUM_PEST_REGS = 128,
OPAL_PHB3_NUM_PEST_REGS = 256
};
struct OpalIoPhbErrorCommon {
__be32 version;
__be32 ioType;
__be32 len;
};
struct OpalIoP7IOCPhbErrorData {
struct OpalIoPhbErrorCommon common;
__be32 brdgCtl;
// P7IOC utl regs
__be32 portStatusReg;
__be32 rootCmplxStatus;
__be32 busAgentStatus;
// P7IOC cfg regs
__be32 deviceStatus;
__be32 slotStatus;
__be32 linkStatus;
__be32 devCmdStatus;
__be32 devSecStatus;
// cfg AER regs
__be32 rootErrorStatus;
__be32 uncorrErrorStatus;
__be32 corrErrorStatus;
__be32 tlpHdr1;
__be32 tlpHdr2;
__be32 tlpHdr3;
__be32 tlpHdr4;
__be32 sourceId;
__be32 rsv3;
// Record data about the call to allocate a buffer.
__be64 errorClass;
__be64 correlator;
//P7IOC MMIO Error Regs
__be64 p7iocPlssr; // n120
__be64 p7iocCsr; // n110
__be64 lemFir; // nC00
__be64 lemErrorMask; // nC18
__be64 lemWOF; // nC40
__be64 phbErrorStatus; // nC80
__be64 phbFirstErrorStatus; // nC88
__be64 phbErrorLog0; // nCC0
__be64 phbErrorLog1; // nCC8
__be64 mmioErrorStatus; // nD00
__be64 mmioFirstErrorStatus; // nD08
__be64 mmioErrorLog0; // nD40
__be64 mmioErrorLog1; // nD48
__be64 dma0ErrorStatus; // nD80
__be64 dma0FirstErrorStatus; // nD88
__be64 dma0ErrorLog0; // nDC0
__be64 dma0ErrorLog1; // nDC8
__be64 dma1ErrorStatus; // nE00
__be64 dma1FirstErrorStatus; // nE08
__be64 dma1ErrorLog0; // nE40
__be64 dma1ErrorLog1; // nE48
__be64 pestA[OPAL_P7IOC_NUM_PEST_REGS];
__be64 pestB[OPAL_P7IOC_NUM_PEST_REGS];
};
struct OpalIoPhb3ErrorData {
struct OpalIoPhbErrorCommon common;
__be32 brdgCtl;
/* PHB3 UTL regs */
__be32 portStatusReg;
__be32 rootCmplxStatus;
__be32 busAgentStatus;
/* PHB3 cfg regs */
__be32 deviceStatus;
__be32 slotStatus;
__be32 linkStatus;
__be32 devCmdStatus;
__be32 devSecStatus;
/* cfg AER regs */
__be32 rootErrorStatus;
__be32 uncorrErrorStatus;
__be32 corrErrorStatus;
__be32 tlpHdr1;
__be32 tlpHdr2;
__be32 tlpHdr3;
__be32 tlpHdr4;
__be32 sourceId;
__be32 rsv3;
/* Record data about the call to allocate a buffer */
__be64 errorClass;
__be64 correlator;
/* PHB3 MMIO Error Regs */
__be64 nFir; /* 000 */
__be64 nFirMask; /* 003 */
__be64 nFirWOF; /* 008 */
__be64 phbPlssr; /* 120 */
__be64 phbCsr; /* 110 */
__be64 lemFir; /* C00 */
__be64 lemErrorMask; /* C18 */
__be64 lemWOF; /* C40 */
__be64 phbErrorStatus; /* C80 */
__be64 phbFirstErrorStatus; /* C88 */
__be64 phbErrorLog0; /* CC0 */
__be64 phbErrorLog1; /* CC8 */
__be64 mmioErrorStatus; /* D00 */
__be64 mmioFirstErrorStatus; /* D08 */
__be64 mmioErrorLog0; /* D40 */
__be64 mmioErrorLog1; /* D48 */
__be64 dma0ErrorStatus; /* D80 */
__be64 dma0FirstErrorStatus; /* D88 */
__be64 dma0ErrorLog0; /* DC0 */
__be64 dma0ErrorLog1; /* DC8 */
__be64 dma1ErrorStatus; /* E00 */
__be64 dma1FirstErrorStatus; /* E08 */
__be64 dma1ErrorLog0; /* E40 */
__be64 dma1ErrorLog1; /* E48 */
__be64 pestA[OPAL_PHB3_NUM_PEST_REGS];
__be64 pestB[OPAL_PHB3_NUM_PEST_REGS];
};
enum {
OPAL_REINIT_CPUS_HILE_BE = (1 << 0),
OPAL_REINIT_CPUS_HILE_LE = (1 << 1),
};
typedef struct oppanel_line {
__be64 line;
__be64 line_len;
} oppanel_line_t;
enum opal_prd_msg_type {
OPAL_PRD_MSG_TYPE_INIT = 0, /* HBRT --> OPAL */
OPAL_PRD_MSG_TYPE_FINI, /* HBRT/kernel --> OPAL */
OPAL_PRD_MSG_TYPE_ATTN, /* HBRT <-- OPAL */
OPAL_PRD_MSG_TYPE_ATTN_ACK, /* HBRT --> OPAL */
OPAL_PRD_MSG_TYPE_OCC_ERROR, /* HBRT <-- OPAL */
OPAL_PRD_MSG_TYPE_OCC_RESET, /* HBRT <-- OPAL */
};
struct opal_prd_msg_header {
uint8_t type;
uint8_t pad[1];
__be16 size;
};
struct opal_prd_msg;
#define OCC_RESET 0
#define OCC_LOAD 1
#define OCC_THROTTLE 2
#define OCC_MAX_THROTTLE_STATUS 5
struct opal_occ_msg {
__be64 type;
__be64 chip;
__be64 throttle_status;
};
/*
* SG entries
*
* WARNING: The current implementation requires each entry
* to represent a block that is 4k aligned *and* each block
* size except the last one in the list to be as well.
*/
struct opal_sg_entry {
__be64 data;
__be64 length;
};
/*
* Candidate image SG list.
*
* length = VER | length
*/
struct opal_sg_list {
__be64 length;
__be64 next;
struct opal_sg_entry entry[];
};
/*
* Dump region ID range usable by the OS
*/
#define OPAL_DUMP_REGION_HOST_START 0x80
#define OPAL_DUMP_REGION_LOG_BUF 0x80
#define OPAL_DUMP_REGION_HOST_END 0xFF
/* CAPI modes for PHB */
enum {
OPAL_PHB_CAPI_MODE_PCIE = 0,
OPAL_PHB_CAPI_MODE_CAPI = 1,
OPAL_PHB_CAPI_MODE_SNOOP_OFF = 2,
OPAL_PHB_CAPI_MODE_SNOOP_ON = 3,
OPAL_PHB_CAPI_MODE_DMA = 4,
};
/* OPAL I2C request */
struct opal_i2c_request {
uint8_t type;
#define OPAL_I2C_RAW_READ 0
#define OPAL_I2C_RAW_WRITE 1
#define OPAL_I2C_SM_READ 2
#define OPAL_I2C_SM_WRITE 3
uint8_t flags;
#define OPAL_I2C_ADDR_10 0x01 /* Not supported yet */
uint8_t subaddr_sz; /* Max 4 */
uint8_t reserved;
__be16 addr; /* 7 or 10 bit address */
__be16 reserved2;
__be32 subaddr; /* Sub-address if any */
__be32 size; /* Data size */
__be64 buffer_ra; /* Buffer real address */
};
/*
* EPOW status sharing (OPAL and the host)
*
* The host will pass on OPAL, a buffer of length OPAL_SYSEPOW_MAX
* with individual elements being 16 bits wide to fetch the system
* wide EPOW status. Each element in the buffer will contain the
* EPOW status in it's bit representation for a particular EPOW sub
* class as defined here. So multiple detailed EPOW status bits
* specific for any sub class can be represented in a single buffer
* element as it's bit representation.
*/
/* System EPOW type */
enum OpalSysEpow {
OPAL_SYSEPOW_POWER = 0, /* Power EPOW */
OPAL_SYSEPOW_TEMP = 1, /* Temperature EPOW */
OPAL_SYSEPOW_COOLING = 2, /* Cooling EPOW */
OPAL_SYSEPOW_MAX = 3, /* Max EPOW categories */
};
/* Power EPOW */
enum OpalSysPower {
OPAL_SYSPOWER_UPS = 0x0001, /* System on UPS power */
OPAL_SYSPOWER_CHNG = 0x0002, /* System power config change */
OPAL_SYSPOWER_FAIL = 0x0004, /* System impending power failure */
OPAL_SYSPOWER_INCL = 0x0008, /* System incomplete power */
};
/* Temperature EPOW */
enum OpalSysTemp {
OPAL_SYSTEMP_AMB = 0x0001, /* System over ambient temperature */
OPAL_SYSTEMP_INT = 0x0002, /* System over internal temperature */
OPAL_SYSTEMP_HMD = 0x0004, /* System over ambient humidity */
};
/* Cooling EPOW */
enum OpalSysCooling {
OPAL_SYSCOOL_INSF = 0x0001, /* System insufficient cooling */
};
/* Argument to OPAL_CEC_REBOOT2() */
enum {
OPAL_REBOOT_NORMAL = 0,
OPAL_REBOOT_PLATFORM_ERROR = 1,
};
/* Argument to OPAL_PCI_TCE_KILL */
enum {
OPAL_PCI_TCE_KILL_PAGES,
OPAL_PCI_TCE_KILL_PE,
OPAL_PCI_TCE_KILL_ALL,
};
#endif /* __ASSEMBLY__ */
#endif /* __OPAL_API_H */