linux/tools/bpf/Makefile

108 lines
2.7 KiB
Makefile
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 15:07:57 +01:00
# SPDX-License-Identifier: GPL-2.0
include ../scripts/Makefile.include
prefix ?= /usr/local
filter: add minimal BPF JIT image disassembler This is a minimal stand-alone user space helper, that allows for debugging or verification of emitted BPF JIT images. This is in particular useful for emitted opcode debugging, since minor bugs in the JIT compiler can be fatal. The disassembler is architecture generic and uses libopcodes and libbfd. How to get to the disassembly, example: 1) `echo 2 > /proc/sys/net/core/bpf_jit_enable` 2) Load a BPF filter (e.g. `tcpdump -p -n -s 0 -i eth1 host 192.168.20.0/24`) 3) Run e.g. `bpf_jit_disasm -o` to disassemble the most recent JIT code output `bpf_jit_disasm -o` will display the related opcodes to a particular instruction as well. Example for x86_64: $ ./bpf_jit_disasm 94 bytes emitted from JIT compiler (pass:3, flen:9) ffffffffa0356000 + <x>: 0: push %rbp 1: mov %rsp,%rbp 4: sub $0x60,%rsp 8: mov %rbx,-0x8(%rbp) c: mov 0x68(%rdi),%r9d 10: sub 0x6c(%rdi),%r9d 14: mov 0xe0(%rdi),%r8 1b: mov $0xc,%esi 20: callq 0xffffffffe0d01b71 25: cmp $0x86dd,%eax 2a: jne 0x000000000000003d 2c: mov $0x14,%esi 31: callq 0xffffffffe0d01b8d 36: cmp $0x6,%eax [...] 5c: leaveq 5d: retq $ ./bpf_jit_disasm -o 94 bytes emitted from JIT compiler (pass:3, flen:9) ffffffffa0356000 + <x>: 0: push %rbp 55 1: mov %rsp,%rbp 48 89 e5 4: sub $0x60,%rsp 48 83 ec 60 8: mov %rbx,-0x8(%rbp) 48 89 5d f8 c: mov 0x68(%rdi),%r9d 44 8b 4f 68 10: sub 0x6c(%rdi),%r9d 44 2b 4f 6c [...] 5c: leaveq c9 5d: retq c3 Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20 13:11:47 +01:00
CC = gcc
LEX = flex
YACC = bison
MAKE = make
INSTALL ?= install
filter: add minimal BPF JIT image disassembler This is a minimal stand-alone user space helper, that allows for debugging or verification of emitted BPF JIT images. This is in particular useful for emitted opcode debugging, since minor bugs in the JIT compiler can be fatal. The disassembler is architecture generic and uses libopcodes and libbfd. How to get to the disassembly, example: 1) `echo 2 > /proc/sys/net/core/bpf_jit_enable` 2) Load a BPF filter (e.g. `tcpdump -p -n -s 0 -i eth1 host 192.168.20.0/24`) 3) Run e.g. `bpf_jit_disasm -o` to disassemble the most recent JIT code output `bpf_jit_disasm -o` will display the related opcodes to a particular instruction as well. Example for x86_64: $ ./bpf_jit_disasm 94 bytes emitted from JIT compiler (pass:3, flen:9) ffffffffa0356000 + <x>: 0: push %rbp 1: mov %rsp,%rbp 4: sub $0x60,%rsp 8: mov %rbx,-0x8(%rbp) c: mov 0x68(%rdi),%r9d 10: sub 0x6c(%rdi),%r9d 14: mov 0xe0(%rdi),%r8 1b: mov $0xc,%esi 20: callq 0xffffffffe0d01b71 25: cmp $0x86dd,%eax 2a: jne 0x000000000000003d 2c: mov $0x14,%esi 31: callq 0xffffffffe0d01b8d 36: cmp $0x6,%eax [...] 5c: leaveq 5d: retq $ ./bpf_jit_disasm -o 94 bytes emitted from JIT compiler (pass:3, flen:9) ffffffffa0356000 + <x>: 0: push %rbp 55 1: mov %rsp,%rbp 48 89 e5 4: sub $0x60,%rsp 48 83 ec 60 8: mov %rbx,-0x8(%rbp) 48 89 5d f8 c: mov 0x68(%rdi),%r9d 44 8b 4f 68 10: sub 0x6c(%rdi),%r9d 44 2b 4f 6c [...] 5c: leaveq c9 5d: retq c3 Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20 13:11:47 +01:00
CFLAGS += -Wall -O2
CFLAGS += -D__EXPORTED_HEADERS__ -I$(srctree)/include/uapi -I$(srctree)/include
ifeq ($(srctree),)
srctree := $(patsubst %/,%,$(dir $(CURDIR)))
srctree := $(patsubst %/,%,$(dir $(srctree)))
endif
ifeq ($(V),1)
Q =
else
Q = @
endif
FEATURE_USER = .bpf
FEATURE_TESTS = libbfd disassembler-four-args
FEATURE_DISPLAY = libbfd disassembler-four-args
check_feat := 1
NON_CHECK_FEAT_TARGETS := clean bpftool_clean
ifdef MAKECMDGOALS
ifeq ($(filter-out $(NON_CHECK_FEAT_TARGETS),$(MAKECMDGOALS)),)
check_feat := 0
endif
endif
ifeq ($(check_feat),1)
ifeq ($(FEATURES_DUMP),)
include $(srctree)/tools/build/Makefile.feature
else
include $(FEATURES_DUMP)
endif
endif
ifeq ($(feature-disassembler-four-args), 1)
CFLAGS += -DDISASM_FOUR_ARGS_SIGNATURE
endif
$(OUTPUT)%.yacc.c: $(srctree)/tools/bpf/%.y
$(QUIET_BISON)$(YACC) -o $@ -d $<
$(OUTPUT)%.lex.c: $(srctree)/tools/bpf/%.l
$(QUIET_FLEX)$(LEX) -o $@ $<
$(OUTPUT)%.o: $(srctree)/tools/bpf/%.c
$(QUIET_CC)$(COMPILE.c) -o $@ $<
$(OUTPUT)%.yacc.o: $(OUTPUT)%.yacc.c
$(QUIET_CC)$(COMPILE.c) -o $@ $<
$(OUTPUT)%.lex.o: $(OUTPUT)%.lex.c
$(QUIET_CC)$(COMPILE.c) -o $@ $<
PROGS = $(OUTPUT)bpf_jit_disasm $(OUTPUT)bpf_dbg $(OUTPUT)bpf_asm
all: $(PROGS) bpftool
filter: add minimal BPF JIT image disassembler This is a minimal stand-alone user space helper, that allows for debugging or verification of emitted BPF JIT images. This is in particular useful for emitted opcode debugging, since minor bugs in the JIT compiler can be fatal. The disassembler is architecture generic and uses libopcodes and libbfd. How to get to the disassembly, example: 1) `echo 2 > /proc/sys/net/core/bpf_jit_enable` 2) Load a BPF filter (e.g. `tcpdump -p -n -s 0 -i eth1 host 192.168.20.0/24`) 3) Run e.g. `bpf_jit_disasm -o` to disassemble the most recent JIT code output `bpf_jit_disasm -o` will display the related opcodes to a particular instruction as well. Example for x86_64: $ ./bpf_jit_disasm 94 bytes emitted from JIT compiler (pass:3, flen:9) ffffffffa0356000 + <x>: 0: push %rbp 1: mov %rsp,%rbp 4: sub $0x60,%rsp 8: mov %rbx,-0x8(%rbp) c: mov 0x68(%rdi),%r9d 10: sub 0x6c(%rdi),%r9d 14: mov 0xe0(%rdi),%r8 1b: mov $0xc,%esi 20: callq 0xffffffffe0d01b71 25: cmp $0x86dd,%eax 2a: jne 0x000000000000003d 2c: mov $0x14,%esi 31: callq 0xffffffffe0d01b8d 36: cmp $0x6,%eax [...] 5c: leaveq 5d: retq $ ./bpf_jit_disasm -o 94 bytes emitted from JIT compiler (pass:3, flen:9) ffffffffa0356000 + <x>: 0: push %rbp 55 1: mov %rsp,%rbp 48 89 e5 4: sub $0x60,%rsp 48 83 ec 60 8: mov %rbx,-0x8(%rbp) 48 89 5d f8 c: mov 0x68(%rdi),%r9d 44 8b 4f 68 10: sub 0x6c(%rdi),%r9d 44 2b 4f 6c [...] 5c: leaveq c9 5d: retq c3 Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20 13:11:47 +01:00
$(OUTPUT)bpf_jit_disasm: CFLAGS += -DPACKAGE='bpf_jit_disasm'
$(OUTPUT)bpf_jit_disasm: $(OUTPUT)bpf_jit_disasm.o
$(QUIET_LINK)$(CC) $(CFLAGS) -o $@ $^ -lopcodes -lbfd -ldl
filter: add minimal BPF JIT image disassembler This is a minimal stand-alone user space helper, that allows for debugging or verification of emitted BPF JIT images. This is in particular useful for emitted opcode debugging, since minor bugs in the JIT compiler can be fatal. The disassembler is architecture generic and uses libopcodes and libbfd. How to get to the disassembly, example: 1) `echo 2 > /proc/sys/net/core/bpf_jit_enable` 2) Load a BPF filter (e.g. `tcpdump -p -n -s 0 -i eth1 host 192.168.20.0/24`) 3) Run e.g. `bpf_jit_disasm -o` to disassemble the most recent JIT code output `bpf_jit_disasm -o` will display the related opcodes to a particular instruction as well. Example for x86_64: $ ./bpf_jit_disasm 94 bytes emitted from JIT compiler (pass:3, flen:9) ffffffffa0356000 + <x>: 0: push %rbp 1: mov %rsp,%rbp 4: sub $0x60,%rsp 8: mov %rbx,-0x8(%rbp) c: mov 0x68(%rdi),%r9d 10: sub 0x6c(%rdi),%r9d 14: mov 0xe0(%rdi),%r8 1b: mov $0xc,%esi 20: callq 0xffffffffe0d01b71 25: cmp $0x86dd,%eax 2a: jne 0x000000000000003d 2c: mov $0x14,%esi 31: callq 0xffffffffe0d01b8d 36: cmp $0x6,%eax [...] 5c: leaveq 5d: retq $ ./bpf_jit_disasm -o 94 bytes emitted from JIT compiler (pass:3, flen:9) ffffffffa0356000 + <x>: 0: push %rbp 55 1: mov %rsp,%rbp 48 89 e5 4: sub $0x60,%rsp 48 83 ec 60 8: mov %rbx,-0x8(%rbp) 48 89 5d f8 c: mov 0x68(%rdi),%r9d 44 8b 4f 68 10: sub 0x6c(%rdi),%r9d 44 2b 4f 6c [...] 5c: leaveq c9 5d: retq c3 Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20 13:11:47 +01:00
$(OUTPUT)bpf_dbg: $(OUTPUT)bpf_dbg.o
$(QUIET_LINK)$(CC) $(CFLAGS) -o $@ $^ -lreadline
filter: bpf_dbg: add minimal bpf debugger This patch adds a minimal BPF debugger that "emulates" the kernel's BPF engine (w/o extensions) and allows for single stepping (forwards and backwards through BPF code) or running with >=1 breakpoints through selected or all packets from a pcap file with a provided user filter in order to facilitate verification of a BPF program. When a breakpoint is being hit, it dumps all register contents, decoded instructions and in case of branches both decoded branch targets as well as other useful information. Having this facility is in particular useful to verify BPF programs against given test traffic *before* attaching to a live system. With the general availability of cls_bpf, xt_bpf, socket filters, team driver and e.g. PTP code, all BPF users, quite often a single more complex BPF program is being used. Reasons for a more complex BPF program are primarily to optimize execution time for making a verdict when multiple simple BPF programs are combined into one in order to prevent parsing same headers multiple times. In particular, for cls_bpf that can have various return paths for encoding flowids, and xt_bpf to come to a fw verdict this can be the case. Therefore, as this can result in more complex and harder to debug code, it would be very useful to have this minimal tool for testing purposes. It can also be of help for BPF JIT developers as filters are "test attached" to the kernel on a temporary socket thus triggering a JIT image dump when enabled. The tool uses an interactive libreadline shell with auto-completion and history support. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11 23:43:43 +01:00
$(OUTPUT)bpf_asm: $(OUTPUT)bpf_asm.o $(OUTPUT)bpf_exp.yacc.o $(OUTPUT)bpf_exp.lex.o
$(QUIET_LINK)$(CC) $(CFLAGS) -o $@ $^
$(OUTPUT)bpf_exp.lex.c: $(OUTPUT)bpf_exp.yacc.c
$(OUTPUT)bpf_exp.yacc.o: $(OUTPUT)bpf_exp.yacc.c
$(OUTPUT)bpf_exp.lex.o: $(OUTPUT)bpf_exp.lex.c
clean: bpftool_clean
$(call QUIET_CLEAN, bpf-progs)
$(Q)rm -rf $(OUTPUT)*.o $(OUTPUT)bpf_jit_disasm $(OUTPUT)bpf_dbg \
$(OUTPUT)bpf_asm $(OUTPUT)bpf_exp.yacc.* $(OUTPUT)bpf_exp.lex.*
$(call QUIET_CLEAN, core-gen)
$(Q)rm -f $(OUTPUT)FEATURE-DUMP.bpf
filter: add minimal BPF JIT image disassembler This is a minimal stand-alone user space helper, that allows for debugging or verification of emitted BPF JIT images. This is in particular useful for emitted opcode debugging, since minor bugs in the JIT compiler can be fatal. The disassembler is architecture generic and uses libopcodes and libbfd. How to get to the disassembly, example: 1) `echo 2 > /proc/sys/net/core/bpf_jit_enable` 2) Load a BPF filter (e.g. `tcpdump -p -n -s 0 -i eth1 host 192.168.20.0/24`) 3) Run e.g. `bpf_jit_disasm -o` to disassemble the most recent JIT code output `bpf_jit_disasm -o` will display the related opcodes to a particular instruction as well. Example for x86_64: $ ./bpf_jit_disasm 94 bytes emitted from JIT compiler (pass:3, flen:9) ffffffffa0356000 + <x>: 0: push %rbp 1: mov %rsp,%rbp 4: sub $0x60,%rsp 8: mov %rbx,-0x8(%rbp) c: mov 0x68(%rdi),%r9d 10: sub 0x6c(%rdi),%r9d 14: mov 0xe0(%rdi),%r8 1b: mov $0xc,%esi 20: callq 0xffffffffe0d01b71 25: cmp $0x86dd,%eax 2a: jne 0x000000000000003d 2c: mov $0x14,%esi 31: callq 0xffffffffe0d01b8d 36: cmp $0x6,%eax [...] 5c: leaveq 5d: retq $ ./bpf_jit_disasm -o 94 bytes emitted from JIT compiler (pass:3, flen:9) ffffffffa0356000 + <x>: 0: push %rbp 55 1: mov %rsp,%rbp 48 89 e5 4: sub $0x60,%rsp 48 83 ec 60 8: mov %rbx,-0x8(%rbp) 48 89 5d f8 c: mov 0x68(%rdi),%r9d 44 8b 4f 68 10: sub 0x6c(%rdi),%r9d 44 2b 4f 6c [...] 5c: leaveq c9 5d: retq c3 Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20 13:11:47 +01:00
install: $(PROGS) bpftool_install
$(call QUIET_INSTALL, bpf_jit_disasm)
$(Q)$(INSTALL) -m 0755 -d $(DESTDIR)$(prefix)/bin
$(Q)$(INSTALL) $(OUTPUT)bpf_jit_disasm $(DESTDIR)$(prefix)/bin/bpf_jit_disasm
$(call QUIET_INSTALL, bpf_dbg)
$(Q)$(INSTALL) $(OUTPUT)bpf_dbg $(DESTDIR)$(prefix)/bin/bpf_dbg
$(call QUIET_INSTALL, bpf_asm)
$(Q)$(INSTALL) $(OUTPUT)bpf_asm $(DESTDIR)$(prefix)/bin/bpf_asm
bpftool:
$(call descend,bpftool)
bpftool_install:
$(call descend,bpftool,install)
bpftool_clean:
$(call descend,bpftool,clean)
.PHONY: all install clean bpftool bpftool_install bpftool_clean