linux/lib/percpu-refcount.c

332 lines
12 KiB
C
Raw Normal View History

#define pr_fmt(fmt) "%s: " fmt "\n", __func__
#include <linux/kernel.h>
percpu_ref: decouple switching to atomic mode and killing percpu_ref has treated the dropping of the base reference and switching to atomic mode as an integral operation; however, there's nothing inherent tying the two together. The use cases for percpu_ref have been expanding continuously. While the current init/kill/reinit/exit model can cover a lot, the coupling of kill/reinit with atomic/percpu mode switching is turning out to be too restrictive for use cases where many percpu_refs are created and destroyed back-to-back with only some of them reaching extended operation. The coupling also makes implementing always-atomic debug mode difficult. This patch separates out atomic mode switching into percpu_ref_switch_to_atomic() and reimplements percpu_ref_kill_and_confirm() on top of it. * The handling of __PERCPU_REF_ATOMIC and __PERCPU_REF_DEAD is now differentiated. Among get/put operations, percpu_ref_tryget_live() is the only one which cares about DEAD. * percpu_ref_switch_to_atomic() can be called multiple times on the same ref. This means that multiple @confirm_switch may get queued up which we can't do reliably without extra memory area. This is handled by making the later invocation synchronously wait for the completion of the previous one. This isn't particularly desirable but such synchronous waits shouldn't happen in most cases. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Johannes Weiner <hannes@cmpxchg.org>
2014-09-24 19:31:49 +02:00
#include <linux/sched.h>
#include <linux/wait.h>
#include <linux/percpu-refcount.h>
/*
* Initially, a percpu refcount is just a set of percpu counters. Initially, we
* don't try to detect the ref hitting 0 - which means that get/put can just
* increment or decrement the local counter. Note that the counter on a
* particular cpu can (and will) wrap - this is fine, when we go to shutdown the
* percpu counters will all sum to the correct value
*
* (More precisely: because moduler arithmatic is commutative the sum of all the
* percpu_count vars will be equal to what it would have been if all the gets
* and puts were done to a single integer, even if some of the percpu integers
* overflow or underflow).
*
* The real trick to implementing percpu refcounts is shutdown. We can't detect
* the ref hitting 0 on every put - this would require global synchronization
* and defeat the whole purpose of using percpu refs.
*
* What we do is require the user to keep track of the initial refcount; we know
* the ref can't hit 0 before the user drops the initial ref, so as long as we
* convert to non percpu mode before the initial ref is dropped everything
* works.
*
* Converting to non percpu mode is done with some RCUish stuff in
* percpu_ref_kill. Additionally, we need a bias value so that the
* atomic_long_t can't hit 0 before we've added up all the percpu refs.
*/
#define PERCPU_COUNT_BIAS (1LU << (BITS_PER_LONG - 1))
percpu_ref: decouple switching to atomic mode and killing percpu_ref has treated the dropping of the base reference and switching to atomic mode as an integral operation; however, there's nothing inherent tying the two together. The use cases for percpu_ref have been expanding continuously. While the current init/kill/reinit/exit model can cover a lot, the coupling of kill/reinit with atomic/percpu mode switching is turning out to be too restrictive for use cases where many percpu_refs are created and destroyed back-to-back with only some of them reaching extended operation. The coupling also makes implementing always-atomic debug mode difficult. This patch separates out atomic mode switching into percpu_ref_switch_to_atomic() and reimplements percpu_ref_kill_and_confirm() on top of it. * The handling of __PERCPU_REF_ATOMIC and __PERCPU_REF_DEAD is now differentiated. Among get/put operations, percpu_ref_tryget_live() is the only one which cares about DEAD. * percpu_ref_switch_to_atomic() can be called multiple times on the same ref. This means that multiple @confirm_switch may get queued up which we can't do reliably without extra memory area. This is handled by making the later invocation synchronously wait for the completion of the previous one. This isn't particularly desirable but such synchronous waits shouldn't happen in most cases. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Johannes Weiner <hannes@cmpxchg.org>
2014-09-24 19:31:49 +02:00
static DECLARE_WAIT_QUEUE_HEAD(percpu_ref_switch_waitq);
static unsigned long __percpu *percpu_count_ptr(struct percpu_ref *ref)
{
return (unsigned long __percpu *)
(ref->percpu_count_ptr & ~__PERCPU_REF_ATOMIC_DEAD);
}
/**
* percpu_ref_init - initialize a percpu refcount
* @ref: percpu_ref to initialize
* @release: function which will be called when refcount hits 0
* @flags: PERCPU_REF_INIT_* flags
* @gfp: allocation mask to use
*
* Initializes @ref. If @flags is zero, @ref starts in percpu mode with a
* refcount of 1; analagous to atomic_long_set(ref, 1). See the
* definitions of PERCPU_REF_INIT_* flags for flag behaviors.
*
* Note that @release must not sleep - it may potentially be called from RCU
* callback context by percpu_ref_kill().
*/
int percpu_ref_init(struct percpu_ref *ref, percpu_ref_func_t *release,
unsigned int flags, gfp_t gfp)
{
size_t align = max_t(size_t, 1 << __PERCPU_REF_FLAG_BITS,
__alignof__(unsigned long));
unsigned long start_count = 0;
ref->percpu_count_ptr = (unsigned long)
__alloc_percpu_gfp(sizeof(unsigned long), align, gfp);
if (!ref->percpu_count_ptr)
return -ENOMEM;
ref->force_atomic = flags & PERCPU_REF_INIT_ATOMIC;
if (flags & (PERCPU_REF_INIT_ATOMIC | PERCPU_REF_INIT_DEAD))
ref->percpu_count_ptr |= __PERCPU_REF_ATOMIC;
else
start_count += PERCPU_COUNT_BIAS;
if (flags & PERCPU_REF_INIT_DEAD)
ref->percpu_count_ptr |= __PERCPU_REF_DEAD;
else
start_count++;
atomic_long_set(&ref->count, start_count);
ref->release = release;
return 0;
}
EXPORT_SYMBOL_GPL(percpu_ref_init);
/**
* percpu_ref_exit - undo percpu_ref_init()
* @ref: percpu_ref to exit
*
* This function exits @ref. The caller is responsible for ensuring that
* @ref is no longer in active use. The usual places to invoke this
* function from are the @ref->release() callback or in init failure path
* where percpu_ref_init() succeeded but other parts of the initialization
* of the embedding object failed.
*/
void percpu_ref_exit(struct percpu_ref *ref)
{
unsigned long __percpu *percpu_count = percpu_count_ptr(ref);
if (percpu_count) {
free_percpu(percpu_count);
ref->percpu_count_ptr = __PERCPU_REF_ATOMIC_DEAD;
}
}
EXPORT_SYMBOL_GPL(percpu_ref_exit);
percpu_ref: decouple switching to atomic mode and killing percpu_ref has treated the dropping of the base reference and switching to atomic mode as an integral operation; however, there's nothing inherent tying the two together. The use cases for percpu_ref have been expanding continuously. While the current init/kill/reinit/exit model can cover a lot, the coupling of kill/reinit with atomic/percpu mode switching is turning out to be too restrictive for use cases where many percpu_refs are created and destroyed back-to-back with only some of them reaching extended operation. The coupling also makes implementing always-atomic debug mode difficult. This patch separates out atomic mode switching into percpu_ref_switch_to_atomic() and reimplements percpu_ref_kill_and_confirm() on top of it. * The handling of __PERCPU_REF_ATOMIC and __PERCPU_REF_DEAD is now differentiated. Among get/put operations, percpu_ref_tryget_live() is the only one which cares about DEAD. * percpu_ref_switch_to_atomic() can be called multiple times on the same ref. This means that multiple @confirm_switch may get queued up which we can't do reliably without extra memory area. This is handled by making the later invocation synchronously wait for the completion of the previous one. This isn't particularly desirable but such synchronous waits shouldn't happen in most cases. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Johannes Weiner <hannes@cmpxchg.org>
2014-09-24 19:31:49 +02:00
static void percpu_ref_call_confirm_rcu(struct rcu_head *rcu)
{
struct percpu_ref *ref = container_of(rcu, struct percpu_ref, rcu);
ref->confirm_switch(ref);
ref->confirm_switch = NULL;
wake_up_all(&percpu_ref_switch_waitq);
/* drop ref from percpu_ref_switch_to_atomic() */
percpu_ref_put(ref);
}
static void percpu_ref_switch_to_atomic_rcu(struct rcu_head *rcu)
{
struct percpu_ref *ref = container_of(rcu, struct percpu_ref, rcu);
unsigned long __percpu *percpu_count = percpu_count_ptr(ref);
unsigned long count = 0;
int cpu;
for_each_possible_cpu(cpu)
count += *per_cpu_ptr(percpu_count, cpu);
pr_debug("global %ld percpu %ld",
atomic_long_read(&ref->count), (long)count);
/*
* It's crucial that we sum the percpu counters _before_ adding the sum
* to &ref->count; since gets could be happening on one cpu while puts
* happen on another, adding a single cpu's count could cause
* @ref->count to hit 0 before we've got a consistent value - but the
* sum of all the counts will be consistent and correct.
*
* Subtracting the bias value then has to happen _after_ adding count to
* &ref->count; we need the bias value to prevent &ref->count from
* reaching 0 before we add the percpu counts. But doing it at the same
* time is equivalent and saves us atomic operations:
*/
atomic_long_add((long)count - PERCPU_COUNT_BIAS, &ref->count);
WARN_ONCE(atomic_long_read(&ref->count) <= 0,
percpu_ref: decouple switching to atomic mode and killing percpu_ref has treated the dropping of the base reference and switching to atomic mode as an integral operation; however, there's nothing inherent tying the two together. The use cases for percpu_ref have been expanding continuously. While the current init/kill/reinit/exit model can cover a lot, the coupling of kill/reinit with atomic/percpu mode switching is turning out to be too restrictive for use cases where many percpu_refs are created and destroyed back-to-back with only some of them reaching extended operation. The coupling also makes implementing always-atomic debug mode difficult. This patch separates out atomic mode switching into percpu_ref_switch_to_atomic() and reimplements percpu_ref_kill_and_confirm() on top of it. * The handling of __PERCPU_REF_ATOMIC and __PERCPU_REF_DEAD is now differentiated. Among get/put operations, percpu_ref_tryget_live() is the only one which cares about DEAD. * percpu_ref_switch_to_atomic() can be called multiple times on the same ref. This means that multiple @confirm_switch may get queued up which we can't do reliably without extra memory area. This is handled by making the later invocation synchronously wait for the completion of the previous one. This isn't particularly desirable but such synchronous waits shouldn't happen in most cases. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Johannes Weiner <hannes@cmpxchg.org>
2014-09-24 19:31:49 +02:00
"percpu ref (%pf) <= 0 (%ld) after switching to atomic",
ref->release, atomic_long_read(&ref->count));
percpu_ref: decouple switching to atomic mode and killing percpu_ref has treated the dropping of the base reference and switching to atomic mode as an integral operation; however, there's nothing inherent tying the two together. The use cases for percpu_ref have been expanding continuously. While the current init/kill/reinit/exit model can cover a lot, the coupling of kill/reinit with atomic/percpu mode switching is turning out to be too restrictive for use cases where many percpu_refs are created and destroyed back-to-back with only some of them reaching extended operation. The coupling also makes implementing always-atomic debug mode difficult. This patch separates out atomic mode switching into percpu_ref_switch_to_atomic() and reimplements percpu_ref_kill_and_confirm() on top of it. * The handling of __PERCPU_REF_ATOMIC and __PERCPU_REF_DEAD is now differentiated. Among get/put operations, percpu_ref_tryget_live() is the only one which cares about DEAD. * percpu_ref_switch_to_atomic() can be called multiple times on the same ref. This means that multiple @confirm_switch may get queued up which we can't do reliably without extra memory area. This is handled by making the later invocation synchronously wait for the completion of the previous one. This isn't particularly desirable but such synchronous waits shouldn't happen in most cases. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Johannes Weiner <hannes@cmpxchg.org>
2014-09-24 19:31:49 +02:00
/* @ref is viewed as dead on all CPUs, send out switch confirmation */
percpu_ref_call_confirm_rcu(rcu);
}
percpu_ref: decouple switching to atomic mode and killing percpu_ref has treated the dropping of the base reference and switching to atomic mode as an integral operation; however, there's nothing inherent tying the two together. The use cases for percpu_ref have been expanding continuously. While the current init/kill/reinit/exit model can cover a lot, the coupling of kill/reinit with atomic/percpu mode switching is turning out to be too restrictive for use cases where many percpu_refs are created and destroyed back-to-back with only some of them reaching extended operation. The coupling also makes implementing always-atomic debug mode difficult. This patch separates out atomic mode switching into percpu_ref_switch_to_atomic() and reimplements percpu_ref_kill_and_confirm() on top of it. * The handling of __PERCPU_REF_ATOMIC and __PERCPU_REF_DEAD is now differentiated. Among get/put operations, percpu_ref_tryget_live() is the only one which cares about DEAD. * percpu_ref_switch_to_atomic() can be called multiple times on the same ref. This means that multiple @confirm_switch may get queued up which we can't do reliably without extra memory area. This is handled by making the later invocation synchronously wait for the completion of the previous one. This isn't particularly desirable but such synchronous waits shouldn't happen in most cases. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Johannes Weiner <hannes@cmpxchg.org>
2014-09-24 19:31:49 +02:00
static void percpu_ref_noop_confirm_switch(struct percpu_ref *ref)
{
}
static void __percpu_ref_switch_to_atomic(struct percpu_ref *ref,
percpu_ref_func_t *confirm_switch)
{
if (!(ref->percpu_count_ptr & __PERCPU_REF_ATOMIC)) {
/* switching from percpu to atomic */
ref->percpu_count_ptr |= __PERCPU_REF_ATOMIC;
/*
* Non-NULL ->confirm_switch is used to indicate that
* switching is in progress. Use noop one if unspecified.
*/
WARN_ON_ONCE(ref->confirm_switch);
ref->confirm_switch =
confirm_switch ?: percpu_ref_noop_confirm_switch;
percpu_ref_get(ref); /* put after confirmation */
call_rcu_sched(&ref->rcu, percpu_ref_switch_to_atomic_rcu);
} else if (confirm_switch) {
/*
* Somebody already set ATOMIC. Switching may still be in
* progress. @confirm_switch must be invoked after the
* switching is complete and a full sched RCU grace period
* has passed. Wait synchronously for the previous
* switching and schedule @confirm_switch invocation.
*/
wait_event(percpu_ref_switch_waitq, !ref->confirm_switch);
ref->confirm_switch = confirm_switch;
percpu_ref_get(ref); /* put after confirmation */
call_rcu_sched(&ref->rcu, percpu_ref_call_confirm_rcu);
}
}
/**
percpu_ref: decouple switching to atomic mode and killing percpu_ref has treated the dropping of the base reference and switching to atomic mode as an integral operation; however, there's nothing inherent tying the two together. The use cases for percpu_ref have been expanding continuously. While the current init/kill/reinit/exit model can cover a lot, the coupling of kill/reinit with atomic/percpu mode switching is turning out to be too restrictive for use cases where many percpu_refs are created and destroyed back-to-back with only some of them reaching extended operation. The coupling also makes implementing always-atomic debug mode difficult. This patch separates out atomic mode switching into percpu_ref_switch_to_atomic() and reimplements percpu_ref_kill_and_confirm() on top of it. * The handling of __PERCPU_REF_ATOMIC and __PERCPU_REF_DEAD is now differentiated. Among get/put operations, percpu_ref_tryget_live() is the only one which cares about DEAD. * percpu_ref_switch_to_atomic() can be called multiple times on the same ref. This means that multiple @confirm_switch may get queued up which we can't do reliably without extra memory area. This is handled by making the later invocation synchronously wait for the completion of the previous one. This isn't particularly desirable but such synchronous waits shouldn't happen in most cases. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Johannes Weiner <hannes@cmpxchg.org>
2014-09-24 19:31:49 +02:00
* percpu_ref_switch_to_atomic - switch a percpu_ref to atomic mode
* @ref: percpu_ref to switch to atomic mode
* @confirm_switch: optional confirmation callback
*
percpu_ref: decouple switching to atomic mode and killing percpu_ref has treated the dropping of the base reference and switching to atomic mode as an integral operation; however, there's nothing inherent tying the two together. The use cases for percpu_ref have been expanding continuously. While the current init/kill/reinit/exit model can cover a lot, the coupling of kill/reinit with atomic/percpu mode switching is turning out to be too restrictive for use cases where many percpu_refs are created and destroyed back-to-back with only some of them reaching extended operation. The coupling also makes implementing always-atomic debug mode difficult. This patch separates out atomic mode switching into percpu_ref_switch_to_atomic() and reimplements percpu_ref_kill_and_confirm() on top of it. * The handling of __PERCPU_REF_ATOMIC and __PERCPU_REF_DEAD is now differentiated. Among get/put operations, percpu_ref_tryget_live() is the only one which cares about DEAD. * percpu_ref_switch_to_atomic() can be called multiple times on the same ref. This means that multiple @confirm_switch may get queued up which we can't do reliably without extra memory area. This is handled by making the later invocation synchronously wait for the completion of the previous one. This isn't particularly desirable but such synchronous waits shouldn't happen in most cases. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Johannes Weiner <hannes@cmpxchg.org>
2014-09-24 19:31:49 +02:00
* There's no reason to use this function for the usual reference counting.
* Use percpu_ref_kill[_and_confirm]().
*
* Schedule switching of @ref to atomic mode. All its percpu counts will
* be collected to the main atomic counter. On completion, when all CPUs
* are guaraneed to be in atomic mode, @confirm_switch, which may not
* block, is invoked. This function may be invoked concurrently with all
* the get/put operations and can safely be mixed with kill and reinit
* operations. Note that @ref will stay in atomic mode across kill/reinit
* cycles until percpu_ref_switch_to_percpu() is called.
*
percpu_ref: decouple switching to atomic mode and killing percpu_ref has treated the dropping of the base reference and switching to atomic mode as an integral operation; however, there's nothing inherent tying the two together. The use cases for percpu_ref have been expanding continuously. While the current init/kill/reinit/exit model can cover a lot, the coupling of kill/reinit with atomic/percpu mode switching is turning out to be too restrictive for use cases where many percpu_refs are created and destroyed back-to-back with only some of them reaching extended operation. The coupling also makes implementing always-atomic debug mode difficult. This patch separates out atomic mode switching into percpu_ref_switch_to_atomic() and reimplements percpu_ref_kill_and_confirm() on top of it. * The handling of __PERCPU_REF_ATOMIC and __PERCPU_REF_DEAD is now differentiated. Among get/put operations, percpu_ref_tryget_live() is the only one which cares about DEAD. * percpu_ref_switch_to_atomic() can be called multiple times on the same ref. This means that multiple @confirm_switch may get queued up which we can't do reliably without extra memory area. This is handled by making the later invocation synchronously wait for the completion of the previous one. This isn't particularly desirable but such synchronous waits shouldn't happen in most cases. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Johannes Weiner <hannes@cmpxchg.org>
2014-09-24 19:31:49 +02:00
* This function normally doesn't block and can be called from any context
* but it may block if @confirm_kill is specified and @ref is already in
* the process of switching to atomic mode. In such cases, @confirm_switch
* will be invoked after the switching is complete.
*
* Due to the way percpu_ref is implemented, @confirm_switch will be called
* after at least one full sched RCU grace period has passed but this is an
* implementation detail and must not be depended upon.
*/
percpu_ref: decouple switching to atomic mode and killing percpu_ref has treated the dropping of the base reference and switching to atomic mode as an integral operation; however, there's nothing inherent tying the two together. The use cases for percpu_ref have been expanding continuously. While the current init/kill/reinit/exit model can cover a lot, the coupling of kill/reinit with atomic/percpu mode switching is turning out to be too restrictive for use cases where many percpu_refs are created and destroyed back-to-back with only some of them reaching extended operation. The coupling also makes implementing always-atomic debug mode difficult. This patch separates out atomic mode switching into percpu_ref_switch_to_atomic() and reimplements percpu_ref_kill_and_confirm() on top of it. * The handling of __PERCPU_REF_ATOMIC and __PERCPU_REF_DEAD is now differentiated. Among get/put operations, percpu_ref_tryget_live() is the only one which cares about DEAD. * percpu_ref_switch_to_atomic() can be called multiple times on the same ref. This means that multiple @confirm_switch may get queued up which we can't do reliably without extra memory area. This is handled by making the later invocation synchronously wait for the completion of the previous one. This isn't particularly desirable but such synchronous waits shouldn't happen in most cases. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Johannes Weiner <hannes@cmpxchg.org>
2014-09-24 19:31:49 +02:00
void percpu_ref_switch_to_atomic(struct percpu_ref *ref,
percpu_ref_func_t *confirm_switch)
{
ref->force_atomic = true;
percpu_ref: decouple switching to atomic mode and killing percpu_ref has treated the dropping of the base reference and switching to atomic mode as an integral operation; however, there's nothing inherent tying the two together. The use cases for percpu_ref have been expanding continuously. While the current init/kill/reinit/exit model can cover a lot, the coupling of kill/reinit with atomic/percpu mode switching is turning out to be too restrictive for use cases where many percpu_refs are created and destroyed back-to-back with only some of them reaching extended operation. The coupling also makes implementing always-atomic debug mode difficult. This patch separates out atomic mode switching into percpu_ref_switch_to_atomic() and reimplements percpu_ref_kill_and_confirm() on top of it. * The handling of __PERCPU_REF_ATOMIC and __PERCPU_REF_DEAD is now differentiated. Among get/put operations, percpu_ref_tryget_live() is the only one which cares about DEAD. * percpu_ref_switch_to_atomic() can be called multiple times on the same ref. This means that multiple @confirm_switch may get queued up which we can't do reliably without extra memory area. This is handled by making the later invocation synchronously wait for the completion of the previous one. This isn't particularly desirable but such synchronous waits shouldn't happen in most cases. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Johannes Weiner <hannes@cmpxchg.org>
2014-09-24 19:31:49 +02:00
__percpu_ref_switch_to_atomic(ref, confirm_switch);
}
static void __percpu_ref_switch_to_percpu(struct percpu_ref *ref)
{
unsigned long __percpu *percpu_count = percpu_count_ptr(ref);
int cpu;
BUG_ON(!percpu_count);
if (!(ref->percpu_count_ptr & __PERCPU_REF_ATOMIC))
return;
wait_event(percpu_ref_switch_waitq, !ref->confirm_switch);
atomic_long_add(PERCPU_COUNT_BIAS, &ref->count);
/*
* Restore per-cpu operation. smp_store_release() is paired with
* smp_read_barrier_depends() in __ref_is_percpu() and guarantees
* that the zeroing is visible to all percpu accesses which can see
* the following __PERCPU_REF_ATOMIC clearing.
*/
for_each_possible_cpu(cpu)
*per_cpu_ptr(percpu_count, cpu) = 0;
smp_store_release(&ref->percpu_count_ptr,
ref->percpu_count_ptr & ~__PERCPU_REF_ATOMIC);
}
/**
* percpu_ref_switch_to_percpu - switch a percpu_ref to percpu mode
* @ref: percpu_ref to switch to percpu mode
*
* There's no reason to use this function for the usual reference counting.
* To re-use an expired ref, use percpu_ref_reinit().
*
* Switch @ref to percpu mode. This function may be invoked concurrently
* with all the get/put operations and can safely be mixed with kill and
* reinit operations. This function reverses the sticky atomic state set
* by PERCPU_REF_INIT_ATOMIC or percpu_ref_switch_to_atomic(). If @ref is
* dying or dead, the actual switching takes place on the following
* percpu_ref_reinit().
*
* This function normally doesn't block and can be called from any context
* but it may block if @ref is in the process of switching to atomic mode
* by percpu_ref_switch_atomic().
*/
void percpu_ref_switch_to_percpu(struct percpu_ref *ref)
{
ref->force_atomic = false;
/* a dying or dead ref can't be switched to percpu mode w/o reinit */
if (!(ref->percpu_count_ptr & __PERCPU_REF_DEAD))
__percpu_ref_switch_to_percpu(ref);
}
percpu_ref: decouple switching to atomic mode and killing percpu_ref has treated the dropping of the base reference and switching to atomic mode as an integral operation; however, there's nothing inherent tying the two together. The use cases for percpu_ref have been expanding continuously. While the current init/kill/reinit/exit model can cover a lot, the coupling of kill/reinit with atomic/percpu mode switching is turning out to be too restrictive for use cases where many percpu_refs are created and destroyed back-to-back with only some of them reaching extended operation. The coupling also makes implementing always-atomic debug mode difficult. This patch separates out atomic mode switching into percpu_ref_switch_to_atomic() and reimplements percpu_ref_kill_and_confirm() on top of it. * The handling of __PERCPU_REF_ATOMIC and __PERCPU_REF_DEAD is now differentiated. Among get/put operations, percpu_ref_tryget_live() is the only one which cares about DEAD. * percpu_ref_switch_to_atomic() can be called multiple times on the same ref. This means that multiple @confirm_switch may get queued up which we can't do reliably without extra memory area. This is handled by making the later invocation synchronously wait for the completion of the previous one. This isn't particularly desirable but such synchronous waits shouldn't happen in most cases. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Johannes Weiner <hannes@cmpxchg.org>
2014-09-24 19:31:49 +02:00
/**
* percpu_ref_kill_and_confirm - drop the initial ref and schedule confirmation
* @ref: percpu_ref to kill
* @confirm_kill: optional confirmation callback
*
* Equivalent to percpu_ref_kill() but also schedules kill confirmation if
* @confirm_kill is not NULL. @confirm_kill, which may not block, will be
* called after @ref is seen as dead from all CPUs at which point all
* further invocations of percpu_ref_tryget_live() will fail. See
* percpu_ref_tryget_live() for details.
*
* This function normally doesn't block and can be called from any context
* but it may block if @confirm_kill is specified and @ref is in the
* process of switching to atomic mode by percpu_ref_switch_atomic().
percpu_ref: decouple switching to atomic mode and killing percpu_ref has treated the dropping of the base reference and switching to atomic mode as an integral operation; however, there's nothing inherent tying the two together. The use cases for percpu_ref have been expanding continuously. While the current init/kill/reinit/exit model can cover a lot, the coupling of kill/reinit with atomic/percpu mode switching is turning out to be too restrictive for use cases where many percpu_refs are created and destroyed back-to-back with only some of them reaching extended operation. The coupling also makes implementing always-atomic debug mode difficult. This patch separates out atomic mode switching into percpu_ref_switch_to_atomic() and reimplements percpu_ref_kill_and_confirm() on top of it. * The handling of __PERCPU_REF_ATOMIC and __PERCPU_REF_DEAD is now differentiated. Among get/put operations, percpu_ref_tryget_live() is the only one which cares about DEAD. * percpu_ref_switch_to_atomic() can be called multiple times on the same ref. This means that multiple @confirm_switch may get queued up which we can't do reliably without extra memory area. This is handled by making the later invocation synchronously wait for the completion of the previous one. This isn't particularly desirable but such synchronous waits shouldn't happen in most cases. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Johannes Weiner <hannes@cmpxchg.org>
2014-09-24 19:31:49 +02:00
*
* Due to the way percpu_ref is implemented, @confirm_switch will be called
* after at least one full sched RCU grace period has passed but this is an
* implementation detail and must not be depended upon.
*/
void percpu_ref_kill_and_confirm(struct percpu_ref *ref,
percpu_ref_func_t *confirm_kill)
{
WARN_ONCE(ref->percpu_count_ptr & __PERCPU_REF_DEAD,
"%s called more than once on %pf!", __func__, ref->release);
ref->percpu_count_ptr |= __PERCPU_REF_DEAD;
__percpu_ref_switch_to_atomic(ref, confirm_kill);
percpu_ref_put(ref);
}
EXPORT_SYMBOL_GPL(percpu_ref_kill_and_confirm);
/**
* percpu_ref_reinit - re-initialize a percpu refcount
* @ref: perpcu_ref to re-initialize
*
* Re-initialize @ref so that it's in the same state as when it finished
* percpu_ref_init() ignoring %PERCPU_REF_INIT_DEAD. @ref must have been
* initialized successfully and reached 0 but not exited.
*
* Note that percpu_ref_tryget[_live]() are safe to perform on @ref while
* this function is in progress.
*/
void percpu_ref_reinit(struct percpu_ref *ref)
{
WARN_ON_ONCE(!percpu_ref_is_zero(ref));
ref->percpu_count_ptr &= ~__PERCPU_REF_DEAD;
percpu_ref_get(ref);
if (!ref->force_atomic)
__percpu_ref_switch_to_percpu(ref);
}
EXPORT_SYMBOL_GPL(percpu_ref_reinit);