OpenE2K/linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
5ef428c4b5
linux/arch/powerpc/kernel/fpu.S

177 lines
4.4 KiB
ArmAsm
Raw Normal View History

powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
/*
* FPU support code, moved here from head.S so that it can be used
* by chips which use other head-whatever.S files.
*
[POWERPC] Restore copyright notice in arch/powerpc/kernel/fpu.S This code got moved from head.S but the copyright notice on head.S didn't get transferred with it. Noticed by Cort Dougan <cort@fsmlabs.com>. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-30 06:45:35 +02:00
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
* Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
* Copyright (C) 1996 Paul Mackerras.
* Copyright (C) 1997 Dan Malek (dmalek@jlc.net).
*
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
*/
powerpc: Use reg.h instead of processor.h when we just want reg names Now that the register names and bit definitions are all in reg.h, use that instead of processor.h in assembly code in a few places. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 14:20:10 +02:00
#include <asm/reg.h>
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
#include <asm/page.h>
#include <asm/mmu.h>
#include <asm/pgtable.h>
#include <asm/cputable.h>
#include <asm/cache.h>
#include <asm/thread_info.h>
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
powerpc: Add VSX assembler code macros This adds the macros for the VSX load/store instruction as most binutils are not going to support this for a while. Also add VSX register save/restore macros and vsr[0-63] register definitions. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-25 06:07:18 +02:00
#ifdef CONFIG_VSX
#define REST_32FPVSRS(n,c,base) \
BEGIN_FTR_SECTION \
b 2f; \
END_FTR_SECTION_IFSET(CPU_FTR_VSX); \
REST_32FPRS(n,base); \
b 3f; \
2: REST_32VSRS(n,c,base); \
3:
#define SAVE_32FPVSRS(n,c,base) \
BEGIN_FTR_SECTION \
b 2f; \
END_FTR_SECTION_IFSET(CPU_FTR_VSX); \
SAVE_32FPRS(n,base); \
b 3f; \
2: SAVE_32VSRS(n,c,base); \
3:
#else
#define REST_32FPVSRS(n,b,base) REST_32FPRS(n, base)
#define SAVE_32FPVSRS(n,b,base) SAVE_32FPRS(n, base)
#endif
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
/*
* This task wants to use the FPU now.
* On UP, disable FP for the task which had the FPU previously,
* and save its floating-point registers in its thread_struct.
* Load up this task's FP registers from its thread_struct,
* enable the FPU for the current task and return to the task.
*/
powerpc: Define 32/64 bit asm macros and use them in fpu.S These macros help in writing assembly code that works for both ppc32 and ppc64. With this we now have a common fpu.S. This takes out load_up_fpu from head_64.S. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-06 02:59:19 +02:00
_GLOBAL(load_up_fpu)
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
mfmsr r5
ori r5,r5,MSR_FP
powerpc: Add VSX context save/restore, ptrace and signal support This patch extends the floating point save and restore code to use the VSX load/stores when VSX is available. This will make FP context save/restore marginally slower on FP only code, when VSX is available, as it has to load/store 128bits rather than just 64bits. Mixing FP, VMX and VSX code will get constant architected state. The signals interface is extended to enable access to VSR 0-31 doubleword 1 after discussions with tool chain maintainers. Backward compatibility is maintained. The ptrace interface is also extended to allow access to VSR 0-31 full registers. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-25 06:07:18 +02:00
#ifdef CONFIG_VSX
BEGIN_FTR_SECTION
oris r5,r5,MSR_VSX@h
END_FTR_SECTION_IFSET(CPU_FTR_VSX)
#endif
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
SYNC
MTMSRD(r5) /* enable use of fpu now */
isync
/*
* For SMP, we don't do lazy FPU switching because it just gets too
* horrendously complex, especially when a task switches from one CPU
* to another. Instead we call giveup_fpu in switch_to.
*/
#ifndef CONFIG_SMP
[PATCH] powerpc: Cleanup LOADADDR etc. asm macros This patch consolidates the variety of macros used for loading 32 or 64-bit constants in assembler (LOADADDR, LOADBASE, SET_REG_TO_*). The idea is to make the set of macros consistent across 32 and 64 bit and to make it more obvious which is the appropriate one to use in a given situation. The new macros and their semantics are described in the comments in ppc_asm.h. In the process, we change several places that were unnecessarily using immediate loads on ppc64 to use the GOT/TOC. Likewise we cleanup a couple of places where we were clumsily subtracting PAGE_OFFSET with asm instructions to use assemble-time arithmetic or the toreal() macro instead. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-13 04:56:25 +01:00
LOAD_REG_ADDRBASE(r3, last_task_used_math)
powerpc: Introduce toreal/fromreal assembly macros On 32-bit platforms, these convert from kernel virtual addresses to real (physical addresses), like tophys/tovirt but they use the same register for the source and destination. On 64-bit platforms, they do nothing because the hardware ignores the top two bits of the address in real mode. These new macros are used in fpu.S now. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 14:44:39 +02:00
toreal(r3)
[PATCH] powerpc: Cleanup LOADADDR etc. asm macros This patch consolidates the variety of macros used for loading 32 or 64-bit constants in assembler (LOADADDR, LOADBASE, SET_REG_TO_*). The idea is to make the set of macros consistent across 32 and 64 bit and to make it more obvious which is the appropriate one to use in a given situation. The new macros and their semantics are described in the comments in ppc_asm.h. In the process, we change several places that were unnecessarily using immediate loads on ppc64 to use the GOT/TOC. Likewise we cleanup a couple of places where we were clumsily subtracting PAGE_OFFSET with asm instructions to use assemble-time arithmetic or the toreal() macro instead. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-13 04:56:25 +01:00
PPC_LL r4,ADDROFF(last_task_used_math)(r3)
[PATCH] powerpc: Consolidate asm compatibility macros This patch consolidates macros used to generate assembly for compatibility across different CPUs or configs. A new header, asm-powerpc/asm-compat.h contains the main compatibility macros. It uses some preprocessor magic to make the macros suitable both for use in .S files, and in inline asm in .c files. Headers (bitops.h, uaccess.h, atomic.h, bug.h) which had their own such compatibility macros are changed to use asm-compat.h. ppc_asm.h is now for use in .S files *only*, and a #error enforces that. As such, we're a lot more careless about namespace pollution here than in asm-compat.h. While we're at it, this patch adds a call to the PPC405_ERR77 macro in futex.h which should have had it already, but didn't. Built and booted on pSeries, Maple and iSeries (ARCH=powerpc). Built for 32-bit powermac (ARCH=powerpc) and Walnut (ARCH=ppc). Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 02:56:55 +01:00
PPC_LCMPI 0,r4,0
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
beq 1f
powerpc: Introduce toreal/fromreal assembly macros On 32-bit platforms, these convert from kernel virtual addresses to real (physical addresses), like tophys/tovirt but they use the same register for the source and destination. On 64-bit platforms, they do nothing because the hardware ignores the top two bits of the address in real mode. These new macros are used in fpu.S now. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 14:44:39 +02:00
toreal(r4)
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
addi r4,r4,THREAD /* want last_task_used_math->thread */
powerpc: Add VSX context save/restore, ptrace and signal support This patch extends the floating point save and restore code to use the VSX load/stores when VSX is available. This will make FP context save/restore marginally slower on FP only code, when VSX is available, as it has to load/store 128bits rather than just 64bits. Mixing FP, VMX and VSX code will get constant architected state. The signals interface is extended to enable access to VSR 0-31 doubleword 1 after discussions with tool chain maintainers. Backward compatibility is maintained. The ptrace interface is also extended to allow access to VSR 0-31 full registers. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-25 06:07:18 +02:00
SAVE_32FPVSRS(0, r5, r4)
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
mffs fr0
[PATCH] powerpc: Fix handling of fpscr on 64-bit The recent merge of fpu.S broken the handling of fpscr for ARCH=powerpc and CONFIG_PPC64=y. FP registers could be corrupted, leading to strange random application crashes. The confusion arises, because the thread_struct has (and requires) a 64-bit area to save the fpscr, because we use load/store double instructions to get it in to/out of the FPU. However, only the low 32-bits are actually used, so we want to treat it as a 32-bit quantity when manipulating its bits to avoid extra load/stores on 32-bit. This patch replaces the current definition with a structure of two 32-bit quantities (pad and val), to clarify things as much as is possible. The 'val' field is used when manipulating bits, the structure itself is used when obtaining the address for loading/unloading the value from the FPU. While we're at it, consolidate the 4 (!) almost identical versions of cvt_fd() and cvt_df() (arch/ppc/kernel/misc.S, arch/ppc64/kernel/misc.S, arch/powerpc/kernel/misc_32.S, arch/powerpc/kernel/misc_64.S) into a single version in fpu.S. The new version takes a pointer to thread_struct and applies the correct offset itself, rather than a pointer to the fpscr field itself, again to avoid confusion as to which is the correct field to use. Finally, this patch makes ARCH=ppc64 also use the consolidated fpu.S code, which it previously did not. Built for G5 (ARCH=ppc64 and ARCH=powerpc), 32-bit powermac (ARCH=ppc and ARCH=powerpc) and Walnut (ARCH=ppc, CONFIG_MATH_EMULATION=y). Booted on G5 (ARCH=powerpc) and things which previously fell over no longer do. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 08:27:25 +02:00
stfd fr0,THREAD_FPSCR(r4)
[PATCH] powerpc: Consolidate asm compatibility macros This patch consolidates macros used to generate assembly for compatibility across different CPUs or configs. A new header, asm-powerpc/asm-compat.h contains the main compatibility macros. It uses some preprocessor magic to make the macros suitable both for use in .S files, and in inline asm in .c files. Headers (bitops.h, uaccess.h, atomic.h, bug.h) which had their own such compatibility macros are changed to use asm-compat.h. ppc_asm.h is now for use in .S files *only*, and a #error enforces that. As such, we're a lot more careless about namespace pollution here than in asm-compat.h. While we're at it, this patch adds a call to the PPC405_ERR77 macro in futex.h which should have had it already, but didn't. Built and booted on pSeries, Maple and iSeries (ARCH=powerpc). Built for 32-bit powermac (ARCH=powerpc) and Walnut (ARCH=ppc). Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 02:56:55 +01:00
PPC_LL r5,PT_REGS(r4)
powerpc: Introduce toreal/fromreal assembly macros On 32-bit platforms, these convert from kernel virtual addresses to real (physical addresses), like tophys/tovirt but they use the same register for the source and destination. On 64-bit platforms, they do nothing because the hardware ignores the top two bits of the address in real mode. These new macros are used in fpu.S now. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 14:44:39 +02:00
toreal(r5)
[PATCH] powerpc: Consolidate asm compatibility macros This patch consolidates macros used to generate assembly for compatibility across different CPUs or configs. A new header, asm-powerpc/asm-compat.h contains the main compatibility macros. It uses some preprocessor magic to make the macros suitable both for use in .S files, and in inline asm in .c files. Headers (bitops.h, uaccess.h, atomic.h, bug.h) which had their own such compatibility macros are changed to use asm-compat.h. ppc_asm.h is now for use in .S files *only*, and a #error enforces that. As such, we're a lot more careless about namespace pollution here than in asm-compat.h. While we're at it, this patch adds a call to the PPC405_ERR77 macro in futex.h which should have had it already, but didn't. Built and booted on pSeries, Maple and iSeries (ARCH=powerpc). Built for 32-bit powermac (ARCH=powerpc) and Walnut (ARCH=ppc). Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 02:56:55 +01:00
PPC_LL r4,_MSR-STACK_FRAME_OVERHEAD(r5)
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
li r10,MSR_FP|MSR_FE0|MSR_FE1
andc r4,r4,r10 /* disable FP for previous task */
[PATCH] powerpc: Consolidate asm compatibility macros This patch consolidates macros used to generate assembly for compatibility across different CPUs or configs. A new header, asm-powerpc/asm-compat.h contains the main compatibility macros. It uses some preprocessor magic to make the macros suitable both for use in .S files, and in inline asm in .c files. Headers (bitops.h, uaccess.h, atomic.h, bug.h) which had their own such compatibility macros are changed to use asm-compat.h. ppc_asm.h is now for use in .S files *only*, and a #error enforces that. As such, we're a lot more careless about namespace pollution here than in asm-compat.h. While we're at it, this patch adds a call to the PPC405_ERR77 macro in futex.h which should have had it already, but didn't. Built and booted on pSeries, Maple and iSeries (ARCH=powerpc). Built for 32-bit powermac (ARCH=powerpc) and Walnut (ARCH=ppc). Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 02:56:55 +01:00
PPC_STL r4,_MSR-STACK_FRAME_OVERHEAD(r5)
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
1:
#endif /* CONFIG_SMP */
/* enable use of FP after return */
powerpc: Define 32/64 bit asm macros and use them in fpu.S These macros help in writing assembly code that works for both ppc32 and ppc64. With this we now have a common fpu.S. This takes out load_up_fpu from head_64.S. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-06 02:59:19 +02:00
#ifdef CONFIG_PPC32
powerpc: Use names rather than numbers for SPRGs (v2) The kernel uses SPRG registers for various purposes, typically in low level assembly code as scratch registers or to hold per-cpu global infos such as the PACA or the current thread_info pointer. We want to be able to easily shuffle the usage of those registers as some implementations have specific constraints realted to some of them, for example, some have userspace readable aliases, etc.. and the current choice isn't always the best. This patch should not change any code generation, and replaces the usage of SPRN_SPRGn everywhere in the kernel with a named replacement and adds documentation next to the definition of the names as to what those are used for on each processor family. The only parts that still use the original numbers are bits of KVM or suspend/resume code that just blindly needs to save/restore all the SPRGs. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-07-14 22:52:54 +02:00
mfspr r5,SPRN_SPRG_THREAD /* current task's THREAD (phys) */
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
lwz r4,THREAD_FPEXC_MODE(r5)
ori r9,r9,MSR_FP /* enable FP for current */
or r9,r9,r4
powerpc: Define 32/64 bit asm macros and use them in fpu.S These macros help in writing assembly code that works for both ppc32 and ppc64. With this we now have a common fpu.S. This takes out load_up_fpu from head_64.S. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-06 02:59:19 +02:00
#else
ld r4,PACACURRENT(r13)
addi r5,r4,THREAD /* Get THREAD */
powerpc/64: Fix bug in setting floating-point exception mode When loading up the FPU, we were using a 'ld' (load doubleword) instruction to get the FP exception mode from the thread_struct, but it's only an int field. This changes the ld to lwz (load word and zero-extend). Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07 03:55:30 +01:00
lwz r4,THREAD_FPEXC_MODE(r5)
powerpc: Define 32/64 bit asm macros and use them in fpu.S These macros help in writing assembly code that works for both ppc32 and ppc64. With this we now have a common fpu.S. This takes out load_up_fpu from head_64.S. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-06 02:59:19 +02:00
ori r12,r12,MSR_FP
or r12,r12,r4
std r12,_MSR(r1)
#endif
[PATCH] powerpc: Fix handling of fpscr on 64-bit The recent merge of fpu.S broken the handling of fpscr for ARCH=powerpc and CONFIG_PPC64=y. FP registers could be corrupted, leading to strange random application crashes. The confusion arises, because the thread_struct has (and requires) a 64-bit area to save the fpscr, because we use load/store double instructions to get it in to/out of the FPU. However, only the low 32-bits are actually used, so we want to treat it as a 32-bit quantity when manipulating its bits to avoid extra load/stores on 32-bit. This patch replaces the current definition with a structure of two 32-bit quantities (pad and val), to clarify things as much as is possible. The 'val' field is used when manipulating bits, the structure itself is used when obtaining the address for loading/unloading the value from the FPU. While we're at it, consolidate the 4 (!) almost identical versions of cvt_fd() and cvt_df() (arch/ppc/kernel/misc.S, arch/ppc64/kernel/misc.S, arch/powerpc/kernel/misc_32.S, arch/powerpc/kernel/misc_64.S) into a single version in fpu.S. The new version takes a pointer to thread_struct and applies the correct offset itself, rather than a pointer to the fpscr field itself, again to avoid confusion as to which is the correct field to use. Finally, this patch makes ARCH=ppc64 also use the consolidated fpu.S code, which it previously did not. Built for G5 (ARCH=ppc64 and ARCH=powerpc), 32-bit powermac (ARCH=ppc and ARCH=powerpc) and Walnut (ARCH=ppc, CONFIG_MATH_EMULATION=y). Booted on G5 (ARCH=powerpc) and things which previously fell over no longer do. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 08:27:25 +02:00
lfd fr0,THREAD_FPSCR(r5)
[POWERPC] 64bit FPSCR support Forthcoming machines will extend the FPSCR to 64 bits. We already had a 64-bit save area for the FPSCR, but we need to use a new form of the mtfsf instruction. Fortunately this new form is decoded as an ordinary mtfsf by existing 64-bit processors. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-10 12:18:39 +02:00
MTFSF_L(fr0)
powerpc: Add VSX context save/restore, ptrace and signal support This patch extends the floating point save and restore code to use the VSX load/stores when VSX is available. This will make FP context save/restore marginally slower on FP only code, when VSX is available, as it has to load/store 128bits rather than just 64bits. Mixing FP, VMX and VSX code will get constant architected state. The signals interface is extended to enable access to VSR 0-31 doubleword 1 after discussions with tool chain maintainers. Backward compatibility is maintained. The ptrace interface is also extended to allow access to VSR 0-31 full registers. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-25 06:07:18 +02:00
REST_32FPVSRS(0, r4, r5)
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
#ifndef CONFIG_SMP
subi r4,r5,THREAD
powerpc: Introduce toreal/fromreal assembly macros On 32-bit platforms, these convert from kernel virtual addresses to real (physical addresses), like tophys/tovirt but they use the same register for the source and destination. On 64-bit platforms, they do nothing because the hardware ignores the top two bits of the address in real mode. These new macros are used in fpu.S now. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 14:44:39 +02:00
fromreal(r4)
[PATCH] powerpc: Cleanup LOADADDR etc. asm macros This patch consolidates the variety of macros used for loading 32 or 64-bit constants in assembler (LOADADDR, LOADBASE, SET_REG_TO_*). The idea is to make the set of macros consistent across 32 and 64 bit and to make it more obvious which is the appropriate one to use in a given situation. The new macros and their semantics are described in the comments in ppc_asm.h. In the process, we change several places that were unnecessarily using immediate loads on ppc64 to use the GOT/TOC. Likewise we cleanup a couple of places where we were clumsily subtracting PAGE_OFFSET with asm instructions to use assemble-time arithmetic or the toreal() macro instead. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-13 04:56:25 +01:00
PPC_STL r4,ADDROFF(last_task_used_math)(r3)
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
#endif /* CONFIG_SMP */
/* restore registers and return */
/* we haven't used ctr or xer or lr */
powerpc: Make load_up_fpu and load_up_altivec callable Make load_up_fpu and load_up_altivec callable so they can be reused by the VSX code. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-25 06:07:18 +02:00
blr
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
/*
* giveup_fpu(tsk)
* Disable FP for the task given as the argument,
* and save the floating-point registers in its thread_struct.
* Enables the FPU for use in the kernel on return.
*/
powerpc: Define 32/64 bit asm macros and use them in fpu.S These macros help in writing assembly code that works for both ppc32 and ppc64. With this we now have a common fpu.S. This takes out load_up_fpu from head_64.S. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-06 02:59:19 +02:00
_GLOBAL(giveup_fpu)
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
mfmsr r5
ori r5,r5,MSR_FP
powerpc: Add VSX context save/restore, ptrace and signal support This patch extends the floating point save and restore code to use the VSX load/stores when VSX is available. This will make FP context save/restore marginally slower on FP only code, when VSX is available, as it has to load/store 128bits rather than just 64bits. Mixing FP, VMX and VSX code will get constant architected state. The signals interface is extended to enable access to VSR 0-31 doubleword 1 after discussions with tool chain maintainers. Backward compatibility is maintained. The ptrace interface is also extended to allow access to VSR 0-31 full registers. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-25 06:07:18 +02:00
#ifdef CONFIG_VSX
BEGIN_FTR_SECTION
oris r5,r5,MSR_VSX@h
END_FTR_SECTION_IFSET(CPU_FTR_VSX)
#endif
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
SYNC_601
ISYNC_601
MTMSRD(r5) /* enable use of fpu now */
SYNC_601
isync
[PATCH] powerpc: Consolidate asm compatibility macros This patch consolidates macros used to generate assembly for compatibility across different CPUs or configs. A new header, asm-powerpc/asm-compat.h contains the main compatibility macros. It uses some preprocessor magic to make the macros suitable both for use in .S files, and in inline asm in .c files. Headers (bitops.h, uaccess.h, atomic.h, bug.h) which had their own such compatibility macros are changed to use asm-compat.h. ppc_asm.h is now for use in .S files *only*, and a #error enforces that. As such, we're a lot more careless about namespace pollution here than in asm-compat.h. While we're at it, this patch adds a call to the PPC405_ERR77 macro in futex.h which should have had it already, but didn't. Built and booted on pSeries, Maple and iSeries (ARCH=powerpc). Built for 32-bit powermac (ARCH=powerpc) and Walnut (ARCH=ppc). Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 02:56:55 +01:00
PPC_LCMPI 0,r3,0
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
beqlr- /* if no previous owner, done */
addi r3,r3,THREAD /* want THREAD of task */
[PATCH] powerpc: Consolidate asm compatibility macros This patch consolidates macros used to generate assembly for compatibility across different CPUs or configs. A new header, asm-powerpc/asm-compat.h contains the main compatibility macros. It uses some preprocessor magic to make the macros suitable both for use in .S files, and in inline asm in .c files. Headers (bitops.h, uaccess.h, atomic.h, bug.h) which had their own such compatibility macros are changed to use asm-compat.h. ppc_asm.h is now for use in .S files *only*, and a #error enforces that. As such, we're a lot more careless about namespace pollution here than in asm-compat.h. While we're at it, this patch adds a call to the PPC405_ERR77 macro in futex.h which should have had it already, but didn't. Built and booted on pSeries, Maple and iSeries (ARCH=powerpc). Built for 32-bit powermac (ARCH=powerpc) and Walnut (ARCH=ppc). Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 02:56:55 +01:00
PPC_LL r5,PT_REGS(r3)
PPC_LCMPI 0,r5,0
powerpc: Add VSX context save/restore, ptrace and signal support This patch extends the floating point save and restore code to use the VSX load/stores when VSX is available. This will make FP context save/restore marginally slower on FP only code, when VSX is available, as it has to load/store 128bits rather than just 64bits. Mixing FP, VMX and VSX code will get constant architected state. The signals interface is extended to enable access to VSR 0-31 doubleword 1 after discussions with tool chain maintainers. Backward compatibility is maintained. The ptrace interface is also extended to allow access to VSR 0-31 full registers. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-25 06:07:18 +02:00
SAVE_32FPVSRS(0, r4 ,r3)
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
mffs fr0
[PATCH] powerpc: Fix handling of fpscr on 64-bit The recent merge of fpu.S broken the handling of fpscr for ARCH=powerpc and CONFIG_PPC64=y. FP registers could be corrupted, leading to strange random application crashes. The confusion arises, because the thread_struct has (and requires) a 64-bit area to save the fpscr, because we use load/store double instructions to get it in to/out of the FPU. However, only the low 32-bits are actually used, so we want to treat it as a 32-bit quantity when manipulating its bits to avoid extra load/stores on 32-bit. This patch replaces the current definition with a structure of two 32-bit quantities (pad and val), to clarify things as much as is possible. The 'val' field is used when manipulating bits, the structure itself is used when obtaining the address for loading/unloading the value from the FPU. While we're at it, consolidate the 4 (!) almost identical versions of cvt_fd() and cvt_df() (arch/ppc/kernel/misc.S, arch/ppc64/kernel/misc.S, arch/powerpc/kernel/misc_32.S, arch/powerpc/kernel/misc_64.S) into a single version in fpu.S. The new version takes a pointer to thread_struct and applies the correct offset itself, rather than a pointer to the fpscr field itself, again to avoid confusion as to which is the correct field to use. Finally, this patch makes ARCH=ppc64 also use the consolidated fpu.S code, which it previously did not. Built for G5 (ARCH=ppc64 and ARCH=powerpc), 32-bit powermac (ARCH=ppc and ARCH=powerpc) and Walnut (ARCH=ppc, CONFIG_MATH_EMULATION=y). Booted on G5 (ARCH=powerpc) and things which previously fell over no longer do. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 08:27:25 +02:00
stfd fr0,THREAD_FPSCR(r3)
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
beq 1f
[PATCH] powerpc: Consolidate asm compatibility macros This patch consolidates macros used to generate assembly for compatibility across different CPUs or configs. A new header, asm-powerpc/asm-compat.h contains the main compatibility macros. It uses some preprocessor magic to make the macros suitable both for use in .S files, and in inline asm in .c files. Headers (bitops.h, uaccess.h, atomic.h, bug.h) which had their own such compatibility macros are changed to use asm-compat.h. ppc_asm.h is now for use in .S files *only*, and a #error enforces that. As such, we're a lot more careless about namespace pollution here than in asm-compat.h. While we're at it, this patch adds a call to the PPC405_ERR77 macro in futex.h which should have had it already, but didn't. Built and booted on pSeries, Maple and iSeries (ARCH=powerpc). Built for 32-bit powermac (ARCH=powerpc) and Walnut (ARCH=ppc). Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 02:56:55 +01:00
PPC_LL r4,_MSR-STACK_FRAME_OVERHEAD(r5)
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
li r3,MSR_FP|MSR_FE0|MSR_FE1
powerpc: Disable VSX or current process in giveup_fpu/altivec When we call giveup_fpu, we need to need to turn off VSX for the current process. If we don't, on return to userspace it may execute a VSX instruction before the next FP instruction, and not have its register state refreshed correctly from the thread_struct. Ditto for altivec. This caused a bug where an unaligned lfs or stfs results in fix_alignment calling giveup_fpu so it can use the FPRs (in order to do a single <-> double conversion), and then returning to userspace with FP off but VSX on. Then if a VSX instruction is executed, before another FP instruction, it will proceed without another exception and hence have the incorrect register state for VSX registers 0-31. lfs unaligned <- alignment exception turns FP off but leaves VSX on VSX instruction <- no exception since VSX on, hence we get the wrong VSX register values for VSX registers 0-31, which overlap the FPRs. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-01 20:02:42 +02:00
#ifdef CONFIG_VSX
BEGIN_FTR_SECTION
oris r3,r3,MSR_VSX@h
END_FTR_SECTION_IFSET(CPU_FTR_VSX)
#endif
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
andc r4,r4,r3 /* disable FP for previous task */
[PATCH] powerpc: Consolidate asm compatibility macros This patch consolidates macros used to generate assembly for compatibility across different CPUs or configs. A new header, asm-powerpc/asm-compat.h contains the main compatibility macros. It uses some preprocessor magic to make the macros suitable both for use in .S files, and in inline asm in .c files. Headers (bitops.h, uaccess.h, atomic.h, bug.h) which had their own such compatibility macros are changed to use asm-compat.h. ppc_asm.h is now for use in .S files *only*, and a #error enforces that. As such, we're a lot more careless about namespace pollution here than in asm-compat.h. While we're at it, this patch adds a call to the PPC405_ERR77 macro in futex.h which should have had it already, but didn't. Built and booted on pSeries, Maple and iSeries (ARCH=powerpc). Built for 32-bit powermac (ARCH=powerpc) and Walnut (ARCH=ppc). Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 02:56:55 +01:00
PPC_STL r4,_MSR-STACK_FRAME_OVERHEAD(r5)
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
1:
#ifndef CONFIG_SMP
li r5,0
[PATCH] powerpc: Cleanup LOADADDR etc. asm macros This patch consolidates the variety of macros used for loading 32 or 64-bit constants in assembler (LOADADDR, LOADBASE, SET_REG_TO_*). The idea is to make the set of macros consistent across 32 and 64 bit and to make it more obvious which is the appropriate one to use in a given situation. The new macros and their semantics are described in the comments in ppc_asm.h. In the process, we change several places that were unnecessarily using immediate loads on ppc64 to use the GOT/TOC. Likewise we cleanup a couple of places where we were clumsily subtracting PAGE_OFFSET with asm instructions to use assemble-time arithmetic or the toreal() macro instead. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-13 04:56:25 +01:00
LOAD_REG_ADDRBASE(r4,last_task_used_math)
PPC_STL r5,ADDROFF(last_task_used_math)(r4)
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
#endif /* CONFIG_SMP */
blr
[PATCH] powerpc: Fix handling of fpscr on 64-bit The recent merge of fpu.S broken the handling of fpscr for ARCH=powerpc and CONFIG_PPC64=y. FP registers could be corrupted, leading to strange random application crashes. The confusion arises, because the thread_struct has (and requires) a 64-bit area to save the fpscr, because we use load/store double instructions to get it in to/out of the FPU. However, only the low 32-bits are actually used, so we want to treat it as a 32-bit quantity when manipulating its bits to avoid extra load/stores on 32-bit. This patch replaces the current definition with a structure of two 32-bit quantities (pad and val), to clarify things as much as is possible. The 'val' field is used when manipulating bits, the structure itself is used when obtaining the address for loading/unloading the value from the FPU. While we're at it, consolidate the 4 (!) almost identical versions of cvt_fd() and cvt_df() (arch/ppc/kernel/misc.S, arch/ppc64/kernel/misc.S, arch/powerpc/kernel/misc_32.S, arch/powerpc/kernel/misc_64.S) into a single version in fpu.S. The new version takes a pointer to thread_struct and applies the correct offset itself, rather than a pointer to the fpscr field itself, again to avoid confusion as to which is the correct field to use. Finally, this patch makes ARCH=ppc64 also use the consolidated fpu.S code, which it previously did not. Built for G5 (ARCH=ppc64 and ARCH=powerpc), 32-bit powermac (ARCH=ppc and ARCH=powerpc) and Walnut (ARCH=ppc, CONFIG_MATH_EMULATION=y). Booted on G5 (ARCH=powerpc) and things which previously fell over no longer do. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 08:27:25 +02:00
/*
* These are used in the alignment trap handler when emulating
* single-precision loads and stores.
*/
_GLOBAL(cvt_fd)
lfs 0,0(r3)
stfd 0,0(r4)
blr
_GLOBAL(cvt_df)
lfd 0,0(r3)
stfs 0,0(r4)
blr
Reference in New Issue Copy Permalink