linux/arch/m32r/boot/setup.S

168 lines
3.6 KiB
ArmAsm
Raw Normal View History

/*
* linux/arch/m32r/boot/setup.S -- A setup code.
*
* Copyright (C) 2001, 2002 Hiroyuki Kondo, Hirokazu Takata,
* and Hitoshi Yamamoto
*
*/
/* $Id$ */
#include <linux/linkage.h>
#include <asm/segment.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <linux/config.h>
#include <asm/assembler.h>
#include <asm/mmu_context.h>
#include <asm/m32r.h>
/*
* References to members of the boot_cpu_data structure.
*/
#define CPU_PARAMS boot_cpu_data
#define M32R_MCICAR 0xfffffff0
#define M32R_MCDCAR 0xfffffff4
#define M32R_MCCR 0xfffffffc
#define M32R_BSCR0 0xffffffd2
;BSEL
#define BSEL0CR0 0x00ef5000
#define BSEL0CR1 0x00ef5004
#define BSEL1CR0 0x00ef5100
#define BSEL1CR1 0x00ef5104
#define BSEL0CR0_VAL 0x00000000
#define BSEL0CR1_VAL 0x01200100
#define BSEL1CR0_VAL 0x01018000
#define BSEL1CR1_VAL 0x00200001
;SDRAMC
#define SDRAMC_SDRF0 0x00ef6000
#define SDRAMC_SDRF1 0x00ef6004
#define SDRAMC_SDIR0 0x00ef6008
#define SDRAMC_SDIR1 0x00ef600c
#define SDRAMC_SD0ADR 0x00ef6020
#define SDRAMC_SD0ER 0x00ef6024
#define SDRAMC_SD0TR 0x00ef6028
#define SDRAMC_SD0MOD 0x00ef602c
#define SDRAMC_SD1ADR 0x00ef6040
#define SDRAMC_SD1ER 0x00ef6044
#define SDRAMC_SD1TR 0x00ef6048
#define SDRAMC_SD1MOD 0x00ef604c
#define SDRAM0 0x18000000
#define SDRAM1 0x1c000000
/*------------------------------------------------------------------------
* start up
*/
/*------------------------------------------------------------------------
* Kernel entry
*/
.section .boot, "ax"
ENTRY(boot)
/* Set cache mode */
#if defined(CONFIG_CHIP_XNUX2)
ldi r0, #-2 ;LDIMM (r0, M32R_MCCR)
ldi r1, #0x0101 ; cache on (with invalidation)
; ldi r1, #0x00 ; cache off
sth r1, @r0
#elif defined(CONFIG_CHIP_M32700) || defined(CONFIG_CHIP_VDEC2) \
|| defined(CONFIG_CHIP_OPSP)
ldi r0, #-4 ;LDIMM (r0, M32R_MCCR)
ldi r1, #0x73 ; cache on (with invalidation)
; ldi r1, #0x00 ; cache off
st r1, @r0
#elif defined(CONFIG_CHIP_M32102)
ldi r0, #-4 ;LDIMM (r0, M32R_MCCR)
ldi r1, #0x101 ; cache on (with invalidation)
; ldi r1, #0x00 ; cache off
st r1, @r0
#else
#error unknown chip configuration
#endif
#ifdef CONFIG_SMP
;; if not BSP (CPU#0) goto AP_loop
seth r5, #shigh(M32R_CPUID_PORTL)
ld r5, @(low(M32R_CPUID_PORTL), r5)
bnez r5, AP_loop
#if !defined(CONFIG_PLAT_USRV)
;; boot AP
ld24 r5, #0xeff2f8 ; IPICR7
ldi r6, #0x2 ; IPI to CPU1
st r6, @r5
#endif
#endif
/*
* Now, Jump to stext
* if with MMU, TLB on.
* if with no MMU, only jump.
*/
.global eit_vector
mmu_on:
LDIMM (r13, stext)
#ifdef CONFIG_MMU
bl init_tlb
LDIMM (r2, eit_vector) ; set EVB(cr5)
mvtc r2, cr5
seth r0, #high(MMU_REG_BASE) ; Set MMU_REG_BASE higher
or3 r0, r0, #low(MMU_REG_BASE) ; Set MMU_REG_BASE lower
ldi r1, #0x01
st r1, @(MATM_offset,r0) ; Set MATM (T bit ON)
ld r0, @(MATM_offset,r0) ; Check
#else
seth r0,#high(M32R_MCDCAR)
or3 r0,r0,#low(M32R_MCDCAR)
ld24 r1,#0x8080
st r1,@r0
#endif /* CONFIG_MMU */
jmp r13
nop
nop
#ifdef CONFIG_SMP
/*
* AP wait loop
*/
ENTRY(AP_loop)
;; disable interrupt
clrpsw #0x40
;; reset EVB
LDIMM (r4, _AP_RE)
seth r5, #high(__PAGE_OFFSET)
or3 r5, r5, #low(__PAGE_OFFSET)
not r5, r5
and r4, r5
mvtc r4, cr5
;; disable maskable interrupt
seth r4, #high(M32R_ICU_IMASK_PORTL)
or3 r4, r4, #low(M32R_ICU_IMASK_PORTL)
ldi r5, #0
st r5, @r4
ld r5, @r4
;; enable only IPI
setpsw #0x40
;; LOOOOOOOOOOOOOOP!!!
.fillinsn
2:
nop
nop
bra 2b
nop
nop
#ifdef CONFIG_CHIP_M32700_TS1
.global dcache_dummy
.balign 16, 0
dcache_dummy:
.byte 16
#endif /* CONFIG_CHIP_M32700_TS1 */
#endif /* CONFIG_SMP */
.end