linux/arch/arm/mach-tegra/sleep.S

162 lines
3.8 KiB
ArmAsm
Raw Normal View History

/*
* arch/arm/mach-tegra/sleep.S
*
* Copyright (c) 2010-2011, NVIDIA Corporation.
* Copyright (c) 2011, Google, Inc.
*
* Author: Colin Cross <ccross@android.com>
* Gary King <gking@nvidia.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/cache.h>
#include <asm/cp15.h>
#include <asm/hardware/cache-l2x0.h>
#include "iomap.h"
#include "flowctrl.h"
#include "sleep.h"
#define CLK_RESET_CCLK_BURST 0x20
#define CLK_RESET_CCLK_DIVIDER 0x24
#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PM_SLEEP)
/*
* tegra_disable_clean_inv_dcache
*
* disable, clean & invalidate the D-cache
*
* Corrupted registers: r1-r3, r6, r8, r9-r11
*/
ENTRY(tegra_disable_clean_inv_dcache)
stmfd sp!, {r0, r4-r5, r7, r9-r11, lr}
dmb @ ensure ordering
/* Disable the D-cache */
mrc p15, 0, r2, c1, c0, 0
bic r2, r2, #CR_C
mcr p15, 0, r2, c1, c0, 0
isb
/* Flush the D-cache */
cmp r0, #TEGRA_FLUSH_CACHE_ALL
blne v7_flush_dcache_louis
bleq v7_flush_dcache_all
/* Trun off coherency */
exit_smp r4, r5
ldmfd sp!, {r0, r4-r5, r7, r9-r11, pc}
ENDPROC(tegra_disable_clean_inv_dcache)
#endif
#ifdef CONFIG_PM_SLEEP
/*
* tegra_init_l2_for_a15
*
* set up the correct L2 cache data RAM latency
*/
ENTRY(tegra_init_l2_for_a15)
mrc p15, 0, r0, c0, c0, 5
ubfx r0, r0, #8, #4
tst r0, #1 @ only need for cluster 0
bne _exit_init_l2_a15
mrc p15, 0x1, r0, c9, c0, 2
and r0, r0, #7
cmp r0, #2
bicne r0, r0, #7
orrne r0, r0, #2
mcrne p15, 0x1, r0, c9, c0, 2
_exit_init_l2_a15:
ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ ARMv6 and greater introduced a new instruction ("bx") which can be used to return from function calls. Recent CPUs perform better when the "bx lr" instruction is used rather than the "mov pc, lr" instruction, and this sequence is strongly recommended to be used by the ARM architecture manual (section A.4.1.1). We provide a new macro "ret" with all its variants for the condition code which will resolve to the appropriate instruction. Rather than doing this piecemeal, and miss some instances, change all the "mov pc" instances to use the new macro, with the exception of the "movs" instruction and the kprobes code. This allows us to detect the "mov pc, lr" case and fix it up - and also gives us the possibility of deploying this for other registers depending on the CPU selection. Reported-by: Will Deacon <will.deacon@arm.com> Tested-by: Stephen Warren <swarren@nvidia.com> # Tegra Jetson TK1 Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> # mioa701_bootresume.S Tested-by: Andrew Lunn <andrew@lunn.ch> # Kirkwood Tested-by: Shawn Guo <shawn.guo@freescale.com> Tested-by: Tony Lindgren <tony@atomide.com> # OMAPs Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> # Armada XP, 375, 385 Acked-by: Sekhar Nori <nsekhar@ti.com> # DaVinci Acked-by: Christoffer Dall <christoffer.dall@linaro.org> # kvm/hyp Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> # PXA3xx Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> # Xen Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> # ARMv7M Tested-by: Simon Horman <horms+renesas@verge.net.au> # Shmobile Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-30 17:29:12 +02:00
ret lr
ENDPROC(tegra_init_l2_for_a15)
/*
* tegra_sleep_cpu_finish(unsigned long v2p)
*
* enters suspend in LP2 by turning off the mmu and jumping to
* tegra?_tear_down_cpu
*/
ENTRY(tegra_sleep_cpu_finish)
mov r4, r0
/* Flush and disable the L1 data cache */
mov r0, #TEGRA_FLUSH_CACHE_ALL
bl tegra_disable_clean_inv_dcache
mov r0, r4
mov32 r6, tegra_tear_down_cpu
ldr r1, [r6]
add r1, r1, r0
mov32 r3, tegra_shut_off_mmu
add r3, r3, r0
mov r0, r1
ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ ARMv6 and greater introduced a new instruction ("bx") which can be used to return from function calls. Recent CPUs perform better when the "bx lr" instruction is used rather than the "mov pc, lr" instruction, and this sequence is strongly recommended to be used by the ARM architecture manual (section A.4.1.1). We provide a new macro "ret" with all its variants for the condition code which will resolve to the appropriate instruction. Rather than doing this piecemeal, and miss some instances, change all the "mov pc" instances to use the new macro, with the exception of the "movs" instruction and the kprobes code. This allows us to detect the "mov pc, lr" case and fix it up - and also gives us the possibility of deploying this for other registers depending on the CPU selection. Reported-by: Will Deacon <will.deacon@arm.com> Tested-by: Stephen Warren <swarren@nvidia.com> # Tegra Jetson TK1 Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> # mioa701_bootresume.S Tested-by: Andrew Lunn <andrew@lunn.ch> # Kirkwood Tested-by: Shawn Guo <shawn.guo@freescale.com> Tested-by: Tony Lindgren <tony@atomide.com> # OMAPs Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> # Armada XP, 375, 385 Acked-by: Sekhar Nori <nsekhar@ti.com> # DaVinci Acked-by: Christoffer Dall <christoffer.dall@linaro.org> # kvm/hyp Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> # PXA3xx Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> # Xen Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> # ARMv7M Tested-by: Simon Horman <horms+renesas@verge.net.au> # Shmobile Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-30 17:29:12 +02:00
ret r3
ENDPROC(tegra_sleep_cpu_finish)
/*
* tegra_shut_off_mmu
*
* r0 = physical address to jump to with mmu off
*
* called with VA=PA mapping
* turns off MMU, icache, dcache and branch prediction
*/
.align L1_CACHE_SHIFT
.pushsection .idmap.text, "ax"
ENTRY(tegra_shut_off_mmu)
mrc p15, 0, r3, c1, c0, 0
movw r2, #CR_I | CR_Z | CR_C | CR_M
bic r3, r3, r2
dsb
mcr p15, 0, r3, c1, c0, 0
isb
#ifdef CONFIG_CACHE_L2X0
/* Disable L2 cache */
check_cpu_part_num 0xc09, r9, r10
ARM: tegra: add LP1 suspend support for Tegra30 The LP1 suspend mode will power off the CPU, clock gated the PLLs and put SDRAM to self-refresh mode. Any interrupt can wake up device from LP1. The sequence when LP1 suspending: * tunning off L1 data cache and the MMU * storing some EMC registers, DPD (deep power down) status, clk source of mselect and SCLK burst policy * putting SDRAM into self-refresh * switching CPU to CLK_M (12MHz OSC) * tunning off PLLM, PLLP, PLLA, PLLC and PLLX * switching SCLK to CLK_S (32KHz OSC) * shutting off the CPU rail The sequence of LP1 resuming: * re-enabling PLLM, PLLP, PLLA, PLLC and PLLX * restoring the clk source of mselect and SCLK burst policy * setting up CCLK burst policy to PLLX * restoring DPD status and some EMC registers * resuming SDRAM to normal mode * jumping to the "tegra_resume" from PMC_SCRATCH41 Due to the SDRAM will be put into self-refresh mode, the low level procedures of LP1 suspending and resuming should be copied to TEGRA_IRAM_CODE_AREA (TEGRA_IRAM_BASE + SZ_4K) when suspending. Before restoring the CPU context when resuming, the SDRAM needs to be switched back to normal mode. And the PLLs need to be re-enabled, SCLK burst policy be restored, CCLK burst policy be set in PLLX. Then jumping to "tegra_resume" that was expected to be stored in PMC_SCRATCH41 to restore CPU context and back to kernel. Based on the work by: Scott Williams <scwilliams@nvidia.com> Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-08-12 11:40:04 +02:00
movweq r2, #:lower16:(TEGRA_ARM_PERIF_BASE + 0x3000)
movteq r2, #:upper16:(TEGRA_ARM_PERIF_BASE + 0x3000)
moveq r3, #0
streq r3, [r2, #L2X0_CTRL]
#endif
ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ ARMv6 and greater introduced a new instruction ("bx") which can be used to return from function calls. Recent CPUs perform better when the "bx lr" instruction is used rather than the "mov pc, lr" instruction, and this sequence is strongly recommended to be used by the ARM architecture manual (section A.4.1.1). We provide a new macro "ret" with all its variants for the condition code which will resolve to the appropriate instruction. Rather than doing this piecemeal, and miss some instances, change all the "mov pc" instances to use the new macro, with the exception of the "movs" instruction and the kprobes code. This allows us to detect the "mov pc, lr" case and fix it up - and also gives us the possibility of deploying this for other registers depending on the CPU selection. Reported-by: Will Deacon <will.deacon@arm.com> Tested-by: Stephen Warren <swarren@nvidia.com> # Tegra Jetson TK1 Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> # mioa701_bootresume.S Tested-by: Andrew Lunn <andrew@lunn.ch> # Kirkwood Tested-by: Shawn Guo <shawn.guo@freescale.com> Tested-by: Tony Lindgren <tony@atomide.com> # OMAPs Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> # Armada XP, 375, 385 Acked-by: Sekhar Nori <nsekhar@ti.com> # DaVinci Acked-by: Christoffer Dall <christoffer.dall@linaro.org> # kvm/hyp Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> # PXA3xx Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> # Xen Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> # ARMv7M Tested-by: Simon Horman <horms+renesas@verge.net.au> # Shmobile Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-30 17:29:12 +02:00
ret r0
ENDPROC(tegra_shut_off_mmu)
.popsection
/*
* tegra_switch_cpu_to_pllp
*
* In LP2 the normal cpu clock pllx will be turned off. Switch the CPU to pllp
*/
ENTRY(tegra_switch_cpu_to_pllp)
/* in LP2 idle (SDRAM active), set the CPU burst policy to PLLP */
mov32 r5, TEGRA_CLK_RESET_BASE
mov r0, #(2 << 28) @ burst policy = run mode
orr r0, r0, #(4 << 4) @ use PLLP in run mode burst
str r0, [r5, #CLK_RESET_CCLK_BURST]
mov r0, #0
str r0, [r5, #CLK_RESET_CCLK_DIVIDER]
ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ ARMv6 and greater introduced a new instruction ("bx") which can be used to return from function calls. Recent CPUs perform better when the "bx lr" instruction is used rather than the "mov pc, lr" instruction, and this sequence is strongly recommended to be used by the ARM architecture manual (section A.4.1.1). We provide a new macro "ret" with all its variants for the condition code which will resolve to the appropriate instruction. Rather than doing this piecemeal, and miss some instances, change all the "mov pc" instances to use the new macro, with the exception of the "movs" instruction and the kprobes code. This allows us to detect the "mov pc, lr" case and fix it up - and also gives us the possibility of deploying this for other registers depending on the CPU selection. Reported-by: Will Deacon <will.deacon@arm.com> Tested-by: Stephen Warren <swarren@nvidia.com> # Tegra Jetson TK1 Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> # mioa701_bootresume.S Tested-by: Andrew Lunn <andrew@lunn.ch> # Kirkwood Tested-by: Shawn Guo <shawn.guo@freescale.com> Tested-by: Tony Lindgren <tony@atomide.com> # OMAPs Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> # Armada XP, 375, 385 Acked-by: Sekhar Nori <nsekhar@ti.com> # DaVinci Acked-by: Christoffer Dall <christoffer.dall@linaro.org> # kvm/hyp Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> # PXA3xx Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> # Xen Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> # ARMv7M Tested-by: Simon Horman <horms+renesas@verge.net.au> # Shmobile Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-30 17:29:12 +02:00
ret lr
ENDPROC(tegra_switch_cpu_to_pllp)
#endif