linux/arch/cris/arch-v32/kernel/process.c

268 lines
6.9 KiB
C
Raw Normal View History

/*
* Copyright (C) 2000-2003 Axis Communications AB
*
* Authors: Bjorn Wesen (bjornw@axis.com)
* Mikael Starvik (starvik@axis.com)
* Tobias Anderberg (tobiasa@axis.com), CRISv32 port.
*
* This file handles the architecture-dependent parts of process handling..
*/
#include <linux/sched.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 09:04:11 +01:00
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/fs.h>
#include <hwregs/reg_rdwr.h>
#include <hwregs/reg_map.h>
#include <hwregs/timer_defs.h>
#include <hwregs/intr_vect_defs.h>
extern void stop_watchdog(void);
extern int cris_hlt_counter;
/* We use this if we don't have any better idle routine. */
void default_idle(void)
{
local_irq_disable();
if (!need_resched() && !cris_hlt_counter) {
/* Halt until exception. */
__asm__ volatile("ei \n\t"
"halt ");
}
local_irq_enable();
}
/*
* Free current thread data structures etc..
*/
extern void deconfigure_bp(long pid);
void exit_thread(void)
{
deconfigure_bp(current->pid);
}
/*
* If the watchdog is enabled, disable interrupts and enter an infinite loop.
* The watchdog will reset the CPU after 0.1s. If the watchdog isn't enabled
* then enable it and wait.
*/
extern void arch_enable_nmi(void);
void
hard_reset_now(void)
{
/*
* Don't declare this variable elsewhere. We don't want any other
* code to know about it than the watchdog handler in entry.S and
* this code, implementing hard reset through the watchdog.
*/
#if defined(CONFIG_ETRAX_WATCHDOG)
extern int cause_of_death;
#endif
printk("*** HARD RESET ***\n");
local_irq_disable();
#if defined(CONFIG_ETRAX_WATCHDOG)
cause_of_death = 0xbedead;
#else
{
reg_timer_rw_wd_ctrl wd_ctrl = {0};
stop_watchdog();
wd_ctrl.key = 16; /* Arbitrary key. */
wd_ctrl.cnt = 1; /* Minimum time. */
wd_ctrl.cmd = regk_timer_start;
arch_enable_nmi();
REG_WR(timer, regi_timer0, rw_wd_ctrl, wd_ctrl);
}
#endif
while (1)
; /* Wait for reset. */
}
/*
* Return saved PC of a blocked thread.
*/
unsigned long thread_saved_pc(struct task_struct *t)
{
return task_pt_regs(t)->erp;
}
static void
kernel_thread_helper(void* dummy, int (*fn)(void *), void * arg)
{
fn(arg);
do_exit(-1); /* Should never be called, return bad exit value. */
}
/* Create a kernel thread. */
int
kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
{
struct pt_regs regs;
memset(&regs, 0, sizeof(regs));
/* Don't use r10 since that is set to 0 in copy_thread. */
regs.r11 = (unsigned long) fn;
regs.r12 = (unsigned long) arg;
regs.erp = (unsigned long) kernel_thread_helper;
regs.ccs = 1 << (I_CCS_BITNR + CCS_SHIFT);
/* Create the new process. */
return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, &regs, 0, NULL, NULL);
}
/*
* Setup the child's kernel stack with a pt_regs and call switch_stack() on it.
* It will be unnested during _resume and _ret_from_sys_call when the new thread
* is scheduled.
*
* Also setup the thread switching structure which is used to keep
* thread-specific data during _resumes.
*/
extern asmlinkage void ret_from_fork(void);
int
copy_thread(unsigned long clone_flags, unsigned long usp,
unsigned long unused,
struct task_struct *p, struct pt_regs *regs)
{
struct pt_regs *childregs;
struct switch_stack *swstack;
/*
* Put the pt_regs structure at the end of the new kernel stack page and
* fix it up. Note: the task_struct doubles as the kernel stack for the
* task.
*/
childregs = task_pt_regs(p);
*childregs = *regs; /* Struct copy of pt_regs. */
p->set_child_tid = p->clear_child_tid = NULL;
childregs->r10 = 0; /* Child returns 0 after a fork/clone. */
/* Set a new TLS ?
* The TLS is in $mof beacuse it is the 5th argument to sys_clone.
*/
if (p->mm && (clone_flags & CLONE_SETTLS)) {
task_thread_info(p)->tls = regs->mof;
}
/* Put the switch stack right below the pt_regs. */
swstack = ((struct switch_stack *) childregs) - 1;
/* Parameter to ret_from_sys_call. 0 is don't restart the syscall. */
swstack->r9 = 0;
/*
* We want to return into ret_from_sys_call after the _resume.
* ret_from_fork will call ret_from_sys_call.
*/
swstack->return_ip = (unsigned long) ret_from_fork;
/* Fix the user-mode and kernel-mode stackpointer. */
p->thread.usp = usp;
p->thread.ksp = (unsigned long) swstack;
return 0;
}
/*
* Be aware of the "magic" 7th argument in the four system-calls below.
* They need the latest stackframe, which is put as the 7th argument by
* entry.S. The previous arguments are dummies or actually used, but need
* to be defined to reach the 7th argument.
*
* N.B.: Another method to get the stackframe is to use current_regs(). But
* it returns the latest stack-frame stacked when going from _user mode_ and
* some of these (at least sys_clone) are called from kernel-mode sometimes
* (for example during kernel_thread, above) and thus cannot use it. Thus,
* to be sure not to get any surprises, we use the method for the other calls
* as well.
*/
asmlinkage int
sys_fork(long r10, long r11, long r12, long r13, long mof, long srp,
struct pt_regs *regs)
{
return do_fork(SIGCHLD, rdusp(), regs, 0, NULL, NULL);
}
/* FIXME: Is parent_tid/child_tid really third/fourth argument? Update lib? */
asmlinkage int
sys_clone(unsigned long newusp, unsigned long flags, int *parent_tid, int *child_tid,
unsigned long tls, long srp, struct pt_regs *regs)
{
if (!newusp)
newusp = rdusp();
return do_fork(flags, newusp, regs, 0, parent_tid, child_tid);
}
/*
* vfork is a system call in i386 because of register-pressure - maybe
* we can remove it and handle it in libc but we put it here until then.
*/
asmlinkage int
sys_vfork(long r10, long r11, long r12, long r13, long mof, long srp,
struct pt_regs *regs)
{
return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, rdusp(), regs, 0, NULL, NULL);
}
/* sys_execve() executes a new program. */
asmlinkage int
sys_execve(const char *fname,
const char *const *argv,
const char *const *envp, long r13, long mof, long srp,
struct pt_regs *regs)
{
int error;
char *filename;
filename = getname(fname);
error = PTR_ERR(filename);
if (IS_ERR(filename))
goto out;
error = do_execve(filename, argv, envp, regs);
putname(filename);
out:
return error;
}
unsigned long
get_wchan(struct task_struct *p)
{
/* TODO */
return 0;
}
#undef last_sched
#undef first_sched
void show_regs(struct pt_regs * regs)
{
unsigned long usp = rdusp();
printk("ERP: %08lx SRP: %08lx CCS: %08lx USP: %08lx MOF: %08lx\n",
regs->erp, regs->srp, regs->ccs, usp, regs->mof);
printk(" r0: %08lx r1: %08lx r2: %08lx r3: %08lx\n",
regs->r0, regs->r1, regs->r2, regs->r3);
printk(" r4: %08lx r5: %08lx r6: %08lx r7: %08lx\n",
regs->r4, regs->r5, regs->r6, regs->r7);
printk(" r8: %08lx r9: %08lx r10: %08lx r11: %08lx\n",
regs->r8, regs->r9, regs->r10, regs->r11);
printk("r12: %08lx r13: %08lx oR10: %08lx\n",
regs->r12, regs->r13, regs->orig_r10);
}