linux/drivers/acpi/acpica/dbmethod.c

370 lines
10 KiB
C
Raw Normal View History

/*******************************************************************************
*
* Module Name: dbmethod - Debug commands for control methods
*
******************************************************************************/
/*
* Copyright (C) 2000 - 2016, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#include "accommon.h"
#include "acdispat.h"
#include "acnamesp.h"
#include "acdebug.h"
#include "acparser.h"
#include "acpredef.h"
#define _COMPONENT ACPI_CA_DEBUGGER
ACPI_MODULE_NAME("dbmethod")
/*******************************************************************************
*
* FUNCTION: acpi_db_set_method_breakpoint
*
* PARAMETERS: location - AML offset of breakpoint
* walk_state - Current walk info
* op - Current Op (from parse walk)
*
* RETURN: None
*
* DESCRIPTION: Set a breakpoint in a control method at the specified
* AML offset
*
******************************************************************************/
void
acpi_db_set_method_breakpoint(char *location,
struct acpi_walk_state *walk_state,
union acpi_parse_object *op)
{
u32 address;
u32 aml_offset;
if (!op) {
acpi_os_printf("There is no method currently executing\n");
return;
}
/* Get and verify the breakpoint address */
address = strtoul(location, NULL, 16);
aml_offset = (u32)ACPI_PTR_DIFF(op->common.aml,
walk_state->parser_state.aml_start);
if (address <= aml_offset) {
acpi_os_printf("Breakpoint %X is beyond current address %X\n",
address, aml_offset);
}
/* Save breakpoint in current walk */
walk_state->user_breakpoint = address;
acpi_os_printf("Breakpoint set at AML offset %X\n", address);
}
/*******************************************************************************
*
* FUNCTION: acpi_db_set_method_call_breakpoint
*
* PARAMETERS: op - Current Op (from parse walk)
*
* RETURN: None
*
* DESCRIPTION: Set a breakpoint in a control method at the specified
* AML offset
*
******************************************************************************/
void acpi_db_set_method_call_breakpoint(union acpi_parse_object *op)
{
if (!op) {
acpi_os_printf("There is no method currently executing\n");
return;
}
acpi_gbl_step_to_next_call = TRUE;
}
/*******************************************************************************
*
* FUNCTION: acpi_db_set_method_data
*
* PARAMETERS: type_arg - L for local, A for argument
* index_arg - which one
* value_arg - Value to set.
*
* RETURN: None
*
* DESCRIPTION: Set a local or argument for the running control method.
* NOTE: only object supported is Number.
*
******************************************************************************/
void acpi_db_set_method_data(char *type_arg, char *index_arg, char *value_arg)
{
char type;
u32 index;
u32 value;
struct acpi_walk_state *walk_state;
union acpi_operand_object *obj_desc;
acpi_status status;
struct acpi_namespace_node *node;
/* Validate type_arg */
acpi_ut_strupr(type_arg);
type = type_arg[0];
if ((type != 'L') && (type != 'A') && (type != 'N')) {
acpi_os_printf("Invalid SET operand: %s\n", type_arg);
return;
}
value = strtoul(value_arg, NULL, 16);
if (type == 'N') {
node = acpi_db_convert_to_node(index_arg);
if (!node) {
return;
}
if (node->type != ACPI_TYPE_INTEGER) {
acpi_os_printf("Can only set Integer nodes\n");
return;
}
obj_desc = node->object;
obj_desc->integer.value = value;
return;
}
/* Get the index and value */
index = strtoul(index_arg, NULL, 16);
walk_state = acpi_ds_get_current_walk_state(acpi_gbl_current_walk_list);
if (!walk_state) {
acpi_os_printf("There is no method currently executing\n");
return;
}
/* Create and initialize the new object */
obj_desc = acpi_ut_create_integer_object((u64)value);
if (!obj_desc) {
acpi_os_printf("Could not create an internal object\n");
return;
}
/* Store the new object into the target */
switch (type) {
case 'A':
/* Set a method argument */
if (index > ACPI_METHOD_MAX_ARG) {
acpi_os_printf("Arg%u - Invalid argument name\n",
index);
goto cleanup;
}
status = acpi_ds_store_object_to_local(ACPI_REFCLASS_ARG,
index, obj_desc,
walk_state);
if (ACPI_FAILURE(status)) {
goto cleanup;
}
obj_desc = walk_state->arguments[index].object;
acpi_os_printf("Arg%u: ", index);
acpi_db_display_internal_object(obj_desc, walk_state);
break;
case 'L':
/* Set a method local */
if (index > ACPI_METHOD_MAX_LOCAL) {
acpi_os_printf
("Local%u - Invalid local variable name\n", index);
goto cleanup;
}
status = acpi_ds_store_object_to_local(ACPI_REFCLASS_LOCAL,
index, obj_desc,
walk_state);
if (ACPI_FAILURE(status)) {
goto cleanup;
}
obj_desc = walk_state->local_variables[index].object;
acpi_os_printf("Local%u: ", index);
acpi_db_display_internal_object(obj_desc, walk_state);
break;
default:
break;
}
cleanup:
acpi_ut_remove_reference(obj_desc);
}
/*******************************************************************************
*
* FUNCTION: acpi_db_disassemble_aml
*
* PARAMETERS: statements - Number of statements to disassemble
* op - Current Op (from parse walk)
*
* RETURN: None
*
* DESCRIPTION: Display disassembled AML (ASL) starting from Op for the number
* of statements specified.
*
******************************************************************************/
void acpi_db_disassemble_aml(char *statements, union acpi_parse_object *op)
{
u32 num_statements = 8;
if (!op) {
acpi_os_printf("There is no method currently executing\n");
return;
}
if (statements) {
num_statements = strtoul(statements, NULL, 0);
}
#ifdef ACPI_DISASSEMBLER
acpi_dm_disassemble(NULL, op, num_statements);
#endif
}
/*******************************************************************************
*
* FUNCTION: acpi_db_disassemble_method
*
* PARAMETERS: name - Name of control method
*
* RETURN: None
*
* DESCRIPTION: Display disassembled AML (ASL) starting from Op for the number
* of statements specified.
*
******************************************************************************/
acpi_status acpi_db_disassemble_method(char *name)
{
acpi_status status;
union acpi_parse_object *op;
struct acpi_walk_state *walk_state;
union acpi_operand_object *obj_desc;
struct acpi_namespace_node *method;
method = acpi_db_convert_to_node(name);
if (!method) {
return (AE_BAD_PARAMETER);
}
if (method->type != ACPI_TYPE_METHOD) {
ACPI_ERROR((AE_INFO, "%s (%s): Object must be a control method",
name, acpi_ut_get_type_name(method->type)));
return (AE_BAD_PARAMETER);
}
obj_desc = method->object;
op = acpi_ps_create_scope_op(obj_desc->method.aml_start);
if (!op) {
return (AE_NO_MEMORY);
}
/* Create and initialize a new walk state */
walk_state = acpi_ds_create_walk_state(0, op, NULL, NULL);
if (!walk_state) {
return (AE_NO_MEMORY);
}
status = acpi_ds_init_aml_walk(walk_state, op, NULL,
obj_desc->method.aml_start,
obj_desc->method.aml_length, NULL,
ACPI_IMODE_LOAD_PASS1);
if (ACPI_FAILURE(status)) {
return (status);
}
status = acpi_ut_allocate_owner_id(&obj_desc->method.owner_id);
walk_state->owner_id = obj_desc->method.owner_id;
/* Push start scope on scope stack and make it current */
status = acpi_ds_scope_stack_push(method, method->type, walk_state);
if (ACPI_FAILURE(status)) {
return (status);
}
/* Parse the entire method AML including deferred operators */
walk_state->parse_flags &= ~ACPI_PARSE_DELETE_TREE;
walk_state->parse_flags |= ACPI_PARSE_DISASSEMBLE;
status = acpi_ps_parse_aml(walk_state);
#ifdef ACPI_DISASSEMBLER
(void)acpi_dm_parse_deferred_ops(op);
/* Now we can disassemble the method */
acpi_gbl_dm_opt_verbose = FALSE;
acpi_dm_disassemble(NULL, op, 0);
acpi_gbl_dm_opt_verbose = TRUE;
#endif
acpi_ps_delete_parse_tree(op);
/* Method cleanup */
acpi_ns_delete_namespace_subtree(method);
acpi_ns_delete_namespace_by_owner(obj_desc->method.owner_id);
acpi_ut_release_owner_id(&obj_desc->method.owner_id);
return (AE_OK);
}