OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
linux/arch/sparc64/mm/tlb.c

100 lines
1.9 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
/* arch/sparc64/mm/tlb.c
*
* Copyright (C) 2004 David S. Miller <davem@redhat.com>
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/percpu.h>
#include <linux/mm.h>
#include <linux/swap.h>
[SPARC64]: Disable preemption during flush_tlb_pending(). A context switch will force a call to flush_tlb_pending() (via switch_to()), so if we test tlb_nr to be non-zero, then sleep, it would become zero and later back at the original context we'll pass zero down into the TLB flushing code which should never see a nr argument of zero. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-01 07:54:27 +02:00
#include <linux/preempt.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
#include <asm/tlbflush.h>
#include <asm/cacheflush.h>
#include <asm/mmu_context.h>
#include <asm/tlb.h>
/* Heavily inspired by the ppc64 code. */
[PATCH] mm: tlb_finish_mmu forget rss zap_pte_range has been counting the pages it frees in tlb->freed, then tlb_finish_mmu has used that to update the mm's rss. That got stranger when I added anon_rss, yet updated it by a different route; and stranger when rss and anon_rss became mm_counters with special access macros. And it would no longer be viable if we're relying on page_table_lock to stabilize the mm_counter, but calling tlb_finish_mmu outside that lock. Remove the mmu_gather's freed field, let tlb_finish_mmu stick to its own business, just decrement the rss mm_counter in zap_pte_range (yes, there was some point to batching the update, and a subsequent patch restores that). And forget the anal paranoia of first reading the counter to avoid going negative - if rss does go negative, just fix that bug. Remove the mmu_gather's flushes and avoided_flushes from arm and arm26: no use was being made of them. But arm26 alone was actually using the freed, in the way some others use need_flush: give it a need_flush. arm26 seems to prefer spaces to tabs here: respect that. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 02:16:03 +01:00
DEFINE_PER_CPU(struct mmu_gather, mmu_gathers) = { 0, };
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
void flush_tlb_pending(void)
{
struct mmu_gather *mp = &__get_cpu_var(mmu_gathers);
[SPARC64]: Disable preemption during flush_tlb_pending(). A context switch will force a call to flush_tlb_pending() (via switch_to()), so if we test tlb_nr to be non-zero, then sleep, it would become zero and later back at the original context we'll pass zero down into the TLB flushing code which should never see a nr argument of zero. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-01 07:54:27 +02:00
preempt_disable();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
if (mp->tlb_nr) {
[SPARC64]: Move away from virtual page tables, part 1. We now use the TSB hardware assist features of the UltraSPARC MMUs. SMP is currently knowingly broken, we need to find another place to store the per-cpu base pointers. We hid them away in the TSB base register, and that obviously will not work any more :-) Another known broken case is non-8KB base page size. Also noticed that flush_tlb_all() is not referenced anywhere, only the internal __flush_tlb_all() (local cpu only) is used by the sparc64 port, so we can get rid of flush_tlb_all(). The kernel gets it's own 8KB TSB (swapper_tsb) and each address space gets it's own private 8K TSB. Later we can add code to dynamically increase the size of per-process TSB as the RSS grows. An 8KB TSB is good enough for up to about a 4MB RSS, after which the TSB starts to incur many capacity and conflict misses. We even accumulate OBP translations into the kernel TSB. Another area for refinement is large page size support. We could use a secondary address space TSB to handle those. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-01 03:29:18 +01:00
flush_tsb_user(mp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
if (CTX_VALID(mp->mm->context)) {
#ifdef CONFIG_SMP
smp_flush_tlb_pending(mp->mm, mp->tlb_nr,
&mp->vaddrs[0]);
#else
__flush_tlb_pending(CTX_HWBITS(mp->mm->context),
mp->tlb_nr, &mp->vaddrs[0]);
#endif
}
mp->tlb_nr = 0;
}
[SPARC64]: Disable preemption during flush_tlb_pending(). A context switch will force a call to flush_tlb_pending() (via switch_to()), so if we test tlb_nr to be non-zero, then sleep, it would become zero and later back at the original context we'll pass zero down into the TLB flushing code which should never see a nr argument of zero. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-01 07:54:27 +02:00
preempt_enable();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
}
void tlb_batch_add(struct mm_struct *mm, unsigned long vaddr, pte_t *ptep, pte_t orig)
{
struct mmu_gather *mp = &__get_cpu_var(mmu_gathers);
unsigned long nr;
vaddr &= PAGE_MASK;
if (pte_exec(orig))
vaddr |= 0x1UL;
[SPARC64]: Avoid dcache-dirty page state management on sun4v. It is totally wasted work, since we have no D-cache aliasing issues on sun4v. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 04:44:50 +01:00
if (tlb_type != hypervisor &&
pte_dirty(orig)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
unsigned long paddr, pfn = pte_pfn(orig);
struct address_space *mapping;
struct page *page;
if (!pfn_valid(pfn))
goto no_cache_flush;
page = pfn_to_page(pfn);
if (PageReserved(page))
goto no_cache_flush;
/* A real file page? */
mapping = page_mapping(page);
if (!mapping)
goto no_cache_flush;
paddr = (unsigned long) page_address(page);
if ((paddr ^ vaddr) & (1 << 13))
flush_dcache_page_all(mm, page);
}
no_cache_flush:
[PATCH] mm: tlb_is_full_mm was obscure tlb_is_full_mm? What does that mean? The TLB is full? No, it means that the mm's last user has gone and the whole mm is being torn down. And it's an inline function because sparc64 uses a different (slightly better) "tlb_frozen" name for the flag others call "fullmm". And now the ptep_get_and_clear_full macro used in zap_pte_range refers directly to tlb->fullmm, which would be wrong for sparc64. Rather than correct that, I'd prefer to scrap tlb_is_full_mm altogether, and change sparc64 to just use the same poor name as everyone else - is that okay? Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 02:16:02 +01:00
if (mp->fullmm)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
return;
nr = mp->tlb_nr;
if (unlikely(nr != 0 && mm != mp->mm)) {
flush_tlb_pending();
nr = 0;
}
if (nr == 0)
mp->mm = mm;
mp->vaddrs[nr] = vaddr;
mp->tlb_nr = ++nr;
if (nr >= TLB_BATCH_NR)
flush_tlb_pending();
}