OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
linux/arch/arm/mach-tegra/board-seaboard-pinmux.c

198 lines
9.4 KiB
C
Raw Normal View History

ARM: tegra: add seaboard, wario and kaen boards This adds board support for the Seaboard eval platform and some of the derivatives that are very similar. Since they only differ in some very minor ways, most of the code is shared. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Colin Cross <ccross@android.com>
2011-02-20 02:25:32 +01:00
/*
ARM: tegra: Switch to new pinctrl driver * Rename old pinmux and new pinctrl platform driver and DT match table entries, so the new driver gets instantiated. * Re-write board-pinmux.c, so that it uses pinctrl APIs to configura the pinmux. * Re-write board-*-pinmux.c so that the pinmux configuration tables are in pinctrl format. Ventana's pin mux table needed some edits on top of the basic format conversion, since some mux options that were previously marked as reserved are now valid in the new pinctrl driver. Attempting to use the old reserved names will result in a failure. Specifically, groups lpw0, lpw2, lsc1, lsck, and lsda were changed from function rsvd4 to displaya, and group pta was changed from function rsvd2 to hdmi. All boards' pin mux tables needed some edits on top of the based format conversion, since function i2c was split into i2c1 (first general I2C controller) and i2cp (power I2C controller) to better align function definitions with HW blocks. Due to the split of mux tables into pure mux and pull/tristate tables, many entries in the separate Seaboard/Ventana tables could be merged into the common table, since the entries differed only in the portion in one of the tables, not both. Most pin groups allow configuration of mux, tri-state, and pull. However, some don't allow pull configuration, which is instead configured by new groups that only allow pull configuration. This is a reflection of the true HW capabilities, which weren't fully represented by the old pinmux driver. This required adding new pull table entries for those new groups, and setting many other entries' pull configuration to TEGRA_PINCONFIG_DONT_SET. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Olof Johansson <olof@lixom.net>
2011-12-13 23:21:01 +01:00
* Copyright (C) 2010-2012 NVIDIA Corporation
arm/tegra: prepare Seaboard pinmux code for derived boards This patch splits out the common part of pinmux and GPIO initialization for seaboard and derived boards. This code is based on work done by Jong Kim <jongk@nvidia.com>. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-10-12 13:53:03 +02:00
* Copyright (C) 2011 Google, Inc.
ARM: tegra: add seaboard, wario and kaen boards This adds board support for the Seaboard eval platform and some of the derivatives that are very similar. Since they only differ in some very minor ways, most of the code is shared. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Colin Cross <ccross@android.com>
2011-02-20 02:25:32 +01:00
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/kernel.h>
#include "board-seaboard.h"
ARM: tegra: Switch to new pinctrl driver * Rename old pinmux and new pinctrl platform driver and DT match table entries, so the new driver gets instantiated. * Re-write board-pinmux.c, so that it uses pinctrl APIs to configura the pinmux. * Re-write board-*-pinmux.c so that the pinmux configuration tables are in pinctrl format. Ventana's pin mux table needed some edits on top of the basic format conversion, since some mux options that were previously marked as reserved are now valid in the new pinctrl driver. Attempting to use the old reserved names will result in a failure. Specifically, groups lpw0, lpw2, lsc1, lsck, and lsda were changed from function rsvd4 to displaya, and group pta was changed from function rsvd2 to hdmi. All boards' pin mux tables needed some edits on top of the based format conversion, since function i2c was split into i2c1 (first general I2C controller) and i2cp (power I2C controller) to better align function definitions with HW blocks. Due to the split of mux tables into pure mux and pull/tristate tables, many entries in the separate Seaboard/Ventana tables could be merged into the common table, since the entries differed only in the portion in one of the tables, not both. Most pin groups allow configuration of mux, tri-state, and pull. However, some don't allow pull configuration, which is instead configured by new groups that only allow pull configuration. This is a reflection of the true HW capabilities, which weren't fully represented by the old pinmux driver. This required adding new pull table entries for those new groups, and setting many other entries' pull configuration to TEGRA_PINCONFIG_DONT_SET. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Olof Johansson <olof@lixom.net>
2011-12-13 23:21:01 +01:00
#include "board-pinmux.h"
ARM: tegra: add seaboard, wario and kaen boards This adds board support for the Seaboard eval platform and some of the derivatives that are very similar. Since they only differ in some very minor ways, most of the code is shared. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Colin Cross <ccross@android.com>
2011-02-20 02:25:32 +01:00
ARM: tegra: Switch to new pinctrl driver * Rename old pinmux and new pinctrl platform driver and DT match table entries, so the new driver gets instantiated. * Re-write board-pinmux.c, so that it uses pinctrl APIs to configura the pinmux. * Re-write board-*-pinmux.c so that the pinmux configuration tables are in pinctrl format. Ventana's pin mux table needed some edits on top of the basic format conversion, since some mux options that were previously marked as reserved are now valid in the new pinctrl driver. Attempting to use the old reserved names will result in a failure. Specifically, groups lpw0, lpw2, lsc1, lsck, and lsda were changed from function rsvd4 to displaya, and group pta was changed from function rsvd2 to hdmi. All boards' pin mux tables needed some edits on top of the based format conversion, since function i2c was split into i2c1 (first general I2C controller) and i2cp (power I2C controller) to better align function definitions with HW blocks. Due to the split of mux tables into pure mux and pull/tristate tables, many entries in the separate Seaboard/Ventana tables could be merged into the common table, since the entries differed only in the portion in one of the tables, not both. Most pin groups allow configuration of mux, tri-state, and pull. However, some don't allow pull configuration, which is instead configured by new groups that only allow pull configuration. This is a reflection of the true HW capabilities, which weren't fully represented by the old pinmux driver. This required adding new pull table entries for those new groups, and setting many other entries' pull configuration to TEGRA_PINCONFIG_DONT_SET. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Olof Johansson <olof@lixom.net>
2011-12-13 23:21:01 +01:00
static unsigned long seaboard_pincfg_drive_sdio1[] = {
TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_HIGH_SPEED_MODE, 0),
TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_SCHMITT, 0),
TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_LOW_POWER_MODE, 3),
TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_DRIVE_DOWN_STRENGTH, 31),
TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_DRIVE_UP_STRENGTH, 31),
TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_SLEW_RATE_FALLING, 3),
TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_SLEW_RATE_RISING, 3),
ARM: tegra: add seaboard, wario and kaen boards This adds board support for the Seaboard eval platform and some of the derivatives that are very similar. Since they only differ in some very minor ways, most of the code is shared. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Colin Cross <ccross@android.com>
2011-02-20 02:25:32 +01:00
};
ARM: tegra: Switch to new pinctrl driver * Rename old pinmux and new pinctrl platform driver and DT match table entries, so the new driver gets instantiated. * Re-write board-pinmux.c, so that it uses pinctrl APIs to configura the pinmux. * Re-write board-*-pinmux.c so that the pinmux configuration tables are in pinctrl format. Ventana's pin mux table needed some edits on top of the basic format conversion, since some mux options that were previously marked as reserved are now valid in the new pinctrl driver. Attempting to use the old reserved names will result in a failure. Specifically, groups lpw0, lpw2, lsc1, lsck, and lsda were changed from function rsvd4 to displaya, and group pta was changed from function rsvd2 to hdmi. All boards' pin mux tables needed some edits on top of the based format conversion, since function i2c was split into i2c1 (first general I2C controller) and i2cp (power I2C controller) to better align function definitions with HW blocks. Due to the split of mux tables into pure mux and pull/tristate tables, many entries in the separate Seaboard/Ventana tables could be merged into the common table, since the entries differed only in the portion in one of the tables, not both. Most pin groups allow configuration of mux, tri-state, and pull. However, some don't allow pull configuration, which is instead configured by new groups that only allow pull configuration. This is a reflection of the true HW capabilities, which weren't fully represented by the old pinmux driver. This required adding new pull table entries for those new groups, and setting many other entries' pull configuration to TEGRA_PINCONFIG_DONT_SET. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Olof Johansson <olof@lixom.net>
2011-12-13 23:21:01 +01:00
static struct pinctrl_map common_map[] = {
TEGRA_MAP_MUXCONF("ata", "ide", none, driven),
TEGRA_MAP_MUXCONF("atb", "sdio4", none, driven),
TEGRA_MAP_MUXCONF("atc", "nand", none, driven),
TEGRA_MAP_MUXCONF("atd", "gmi", none, driven),
TEGRA_MAP_MUXCONF("ate", "gmi", none, tristate),
TEGRA_MAP_MUXCONF("cdev1", "plla_out", none, driven),
TEGRA_MAP_MUXCONF("cdev2", "pllp_out4", none, driven),
TEGRA_MAP_MUXCONF("crtp", "crt", up, tristate),
TEGRA_MAP_MUXCONF("csus", "vi_sensor_clk", none, tristate),
TEGRA_MAP_MUXCONF("dap1", "dap1", none, driven),
TEGRA_MAP_MUXCONF("dap2", "dap2", none, driven),
TEGRA_MAP_MUXCONF("dap3", "dap3", none, tristate),
TEGRA_MAP_MUXCONF("dap4", "dap4", none, driven),
TEGRA_MAP_MUXCONF("dta", "vi", down, driven),
TEGRA_MAP_MUXCONF("dtb", "vi", down, driven),
TEGRA_MAP_MUXCONF("dtc", "vi", down, driven),
TEGRA_MAP_MUXCONF("dtd", "vi", down, driven),
TEGRA_MAP_MUXCONF("dte", "vi", down, tristate),
TEGRA_MAP_MUXCONF("dtf", "i2c3", none, driven),
TEGRA_MAP_MUXCONF("gma", "sdio4", none, driven),
TEGRA_MAP_MUXCONF("gmb", "gmi", up, tristate),
TEGRA_MAP_MUXCONF("gmc", "uartd", none, driven),
TEGRA_MAP_MUXCONF("gme", "sdio4", none, driven),
TEGRA_MAP_MUXCONF("gpu", "pwm", none, driven),
TEGRA_MAP_MUXCONF("gpu7", "rtck", none, driven),
TEGRA_MAP_MUXCONF("gpv", "pcie", none, tristate),
TEGRA_MAP_MUXCONF("hdint", "hdmi", na, tristate),
TEGRA_MAP_MUXCONF("i2cp", "i2cp", none, driven),
TEGRA_MAP_MUXCONF("irrx", "uartb", none, driven),
TEGRA_MAP_MUXCONF("irtx", "uartb", none, driven),
TEGRA_MAP_MUXCONF("kbca", "kbc", up, driven),
TEGRA_MAP_MUXCONF("kbcb", "kbc", up, driven),
TEGRA_MAP_MUXCONF("kbcc", "kbc", up, driven),
TEGRA_MAP_MUXCONF("kbcd", "kbc", up, driven),
TEGRA_MAP_MUXCONF("kbce", "kbc", up, driven),
TEGRA_MAP_MUXCONF("kbcf", "kbc", up, driven),
TEGRA_MAP_MUXCONF("lcsn", "rsvd4", na, tristate),
TEGRA_MAP_MUXCONF("ld0", "displaya", na, driven),
TEGRA_MAP_MUXCONF("ld1", "displaya", na, driven),
TEGRA_MAP_MUXCONF("ld10", "displaya", na, driven),
TEGRA_MAP_MUXCONF("ld11", "displaya", na, driven),
TEGRA_MAP_MUXCONF("ld12", "displaya", na, driven),
TEGRA_MAP_MUXCONF("ld13", "displaya", na, driven),
TEGRA_MAP_MUXCONF("ld14", "displaya", na, driven),
TEGRA_MAP_MUXCONF("ld15", "displaya", na, driven),
TEGRA_MAP_MUXCONF("ld16", "displaya", na, driven),
TEGRA_MAP_MUXCONF("ld17", "displaya", na, driven),
TEGRA_MAP_MUXCONF("ld2", "displaya", na, driven),
TEGRA_MAP_MUXCONF("ld3", "displaya", na, driven),
TEGRA_MAP_MUXCONF("ld4", "displaya", na, driven),
TEGRA_MAP_MUXCONF("ld5", "displaya", na, driven),
TEGRA_MAP_MUXCONF("ld6", "displaya", na, driven),
TEGRA_MAP_MUXCONF("ld7", "displaya", na, driven),
TEGRA_MAP_MUXCONF("ld8", "displaya", na, driven),
TEGRA_MAP_MUXCONF("ld9", "displaya", na, driven),
TEGRA_MAP_MUXCONF("ldc", "rsvd4", na, tristate),
TEGRA_MAP_MUXCONF("ldi", "displaya", na, driven),
TEGRA_MAP_MUXCONF("lhp0", "displaya", na, driven),
TEGRA_MAP_MUXCONF("lhp1", "displaya", na, driven),
TEGRA_MAP_MUXCONF("lhp2", "displaya", na, driven),
TEGRA_MAP_MUXCONF("lhs", "displaya", na, driven),
TEGRA_MAP_MUXCONF("lm0", "rsvd4", na, driven),
TEGRA_MAP_MUXCONF("lm1", "crt", na, tristate),
TEGRA_MAP_MUXCONF("lpp", "displaya", na, driven),
TEGRA_MAP_MUXCONF("lpw1", "rsvd4", na, tristate),
TEGRA_MAP_MUXCONF("lsc0", "displaya", na, driven),
TEGRA_MAP_MUXCONF("lsdi", "rsvd4", na, tristate),
TEGRA_MAP_MUXCONF("lspi", "displaya", na, driven),
TEGRA_MAP_MUXCONF("lvp0", "rsvd4", na, tristate),
TEGRA_MAP_MUXCONF("lvp1", "displaya", na, driven),
TEGRA_MAP_MUXCONF("lvs", "displaya", na, driven),
TEGRA_MAP_MUXCONF("owc", "rsvd2", none, tristate),
TEGRA_MAP_MUXCONF("pmc", "pwr_on", na, driven),
TEGRA_MAP_MUXCONF("pta", "hdmi", none, driven),
TEGRA_MAP_MUXCONF("rm", "i2c1", none, driven),
TEGRA_MAP_MUXCONF("sdb", "sdio3", na, driven),
TEGRA_MAP_MUXCONF("sdc", "sdio3", none, driven),
TEGRA_MAP_MUXCONF("sdd", "sdio3", none, driven),
TEGRA_MAP_MUXCONF("sdio1", "sdio1", up, driven),
TEGRA_MAP_MUXCONF("slxa", "pcie", up, tristate),
TEGRA_MAP_MUXCONF("slxd", "spdif", none, driven),
TEGRA_MAP_MUXCONF("slxk", "pcie", none, driven),
TEGRA_MAP_MUXCONF("spdi", "rsvd2", none, driven),
TEGRA_MAP_MUXCONF("spdo", "rsvd2", none, driven),
TEGRA_MAP_MUXCONF("spib", "gmi", none, tristate),
TEGRA_MAP_MUXCONF("spid", "spi1", none, tristate),
TEGRA_MAP_MUXCONF("spie", "spi1", none, tristate),
TEGRA_MAP_MUXCONF("spif", "spi1", down, tristate),
TEGRA_MAP_MUXCONF("spih", "spi2_alt", up, tristate),
TEGRA_MAP_MUXCONF("uaa", "ulpi", up, driven),
TEGRA_MAP_MUXCONF("uab", "ulpi", up, driven),
TEGRA_MAP_MUXCONF("uac", "rsvd2", none, driven),
TEGRA_MAP_MUXCONF("uad", "irda", none, driven),
TEGRA_MAP_MUXCONF("uca", "uartc", none, driven),
TEGRA_MAP_MUXCONF("ucb", "uartc", none, driven),
TEGRA_MAP_MUXCONF("uda", "ulpi", none, driven),
TEGRA_MAP_CONF("ck32", none, na),
TEGRA_MAP_CONF("ddrc", none, na),
TEGRA_MAP_CONF("pmca", none, na),
TEGRA_MAP_CONF("pmcb", none, na),
TEGRA_MAP_CONF("pmcc", none, na),
TEGRA_MAP_CONF("pmcd", none, na),
TEGRA_MAP_CONF("pmce", none, na),
TEGRA_MAP_CONF("xm2c", none, na),
TEGRA_MAP_CONF("xm2d", none, na),
TEGRA_MAP_CONF("ls", up, na),
TEGRA_MAP_CONF("lc", up, na),
TEGRA_MAP_CONF("ld17_0", down, na),
TEGRA_MAP_CONF("ld19_18", down, na),
TEGRA_MAP_CONF("ld21_20", down, na),
TEGRA_MAP_CONF("ld23_22", down, na),
ARM: tegra: add seaboard, wario and kaen boards This adds board support for the Seaboard eval platform and some of the derivatives that are very similar. Since they only differ in some very minor ways, most of the code is shared. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Colin Cross <ccross@android.com>
2011-02-20 02:25:32 +01:00
};
ARM: tegra: Switch to new pinctrl driver * Rename old pinmux and new pinctrl platform driver and DT match table entries, so the new driver gets instantiated. * Re-write board-pinmux.c, so that it uses pinctrl APIs to configura the pinmux. * Re-write board-*-pinmux.c so that the pinmux configuration tables are in pinctrl format. Ventana's pin mux table needed some edits on top of the basic format conversion, since some mux options that were previously marked as reserved are now valid in the new pinctrl driver. Attempting to use the old reserved names will result in a failure. Specifically, groups lpw0, lpw2, lsc1, lsck, and lsda were changed from function rsvd4 to displaya, and group pta was changed from function rsvd2 to hdmi. All boards' pin mux tables needed some edits on top of the based format conversion, since function i2c was split into i2c1 (first general I2C controller) and i2cp (power I2C controller) to better align function definitions with HW blocks. Due to the split of mux tables into pure mux and pull/tristate tables, many entries in the separate Seaboard/Ventana tables could be merged into the common table, since the entries differed only in the portion in one of the tables, not both. Most pin groups allow configuration of mux, tri-state, and pull. However, some don't allow pull configuration, which is instead configured by new groups that only allow pull configuration. This is a reflection of the true HW capabilities, which weren't fully represented by the old pinmux driver. This required adding new pull table entries for those new groups, and setting many other entries' pull configuration to TEGRA_PINCONFIG_DONT_SET. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Olof Johansson <olof@lixom.net>
2011-12-13 23:21:01 +01:00
static struct pinctrl_map seaboard_map[] = {
TEGRA_MAP_MUXCONF("ddc", "rsvd2", none, tristate),
TEGRA_MAP_MUXCONF("gmd", "sflash", none, driven),
TEGRA_MAP_MUXCONF("lpw0", "hdmi", na, driven),
TEGRA_MAP_MUXCONF("lpw2", "hdmi", na, driven),
TEGRA_MAP_MUXCONF("lsc1", "hdmi", na, tristate),
TEGRA_MAP_MUXCONF("lsck", "hdmi", na, tristate),
TEGRA_MAP_MUXCONF("lsda", "hdmi", na, tristate),
TEGRA_MAP_MUXCONF("slxc", "spdif", none, tristate),
TEGRA_MAP_MUXCONF("spia", "gmi", up, tristate),
TEGRA_MAP_MUXCONF("spic", "gmi", up, driven),
TEGRA_MAP_MUXCONF("spig", "spi2_alt", up, tristate),
PIN_MAP_CONFIGS_GROUP_HOG_DEFAULT(PINMUX_DEV, "drive_sdio1", seaboard_pincfg_drive_sdio1),
arm/tegra: Rework Seaboard-vs-Ventana pinmux table Rather than modifying seaboard_pinmux[] using ventana_pinmux[], split seaboard_pinmux[] into common_pinmux[] and seaboard_pinmux[], and then actually apply common_pinmux[] always, followed by the appopriate one of seaboard_pinmux[] or ventana_pinmux[]. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-16 23:12:29 +01:00
};
ARM: tegra: Switch to new pinctrl driver * Rename old pinmux and new pinctrl platform driver and DT match table entries, so the new driver gets instantiated. * Re-write board-pinmux.c, so that it uses pinctrl APIs to configura the pinmux. * Re-write board-*-pinmux.c so that the pinmux configuration tables are in pinctrl format. Ventana's pin mux table needed some edits on top of the basic format conversion, since some mux options that were previously marked as reserved are now valid in the new pinctrl driver. Attempting to use the old reserved names will result in a failure. Specifically, groups lpw0, lpw2, lsc1, lsck, and lsda were changed from function rsvd4 to displaya, and group pta was changed from function rsvd2 to hdmi. All boards' pin mux tables needed some edits on top of the based format conversion, since function i2c was split into i2c1 (first general I2C controller) and i2cp (power I2C controller) to better align function definitions with HW blocks. Due to the split of mux tables into pure mux and pull/tristate tables, many entries in the separate Seaboard/Ventana tables could be merged into the common table, since the entries differed only in the portion in one of the tables, not both. Most pin groups allow configuration of mux, tri-state, and pull. However, some don't allow pull configuration, which is instead configured by new groups that only allow pull configuration. This is a reflection of the true HW capabilities, which weren't fully represented by the old pinmux driver. This required adding new pull table entries for those new groups, and setting many other entries' pull configuration to TEGRA_PINCONFIG_DONT_SET. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Olof Johansson <olof@lixom.net>
2011-12-13 23:21:01 +01:00
static struct pinctrl_map ventana_map[] = {
TEGRA_MAP_MUXCONF("ddc", "rsvd2", none, driven),
TEGRA_MAP_MUXCONF("gmd", "sflash", none, tristate),
TEGRA_MAP_MUXCONF("lpw0", "displaya", na, driven),
TEGRA_MAP_MUXCONF("lpw2", "displaya", na, driven),
TEGRA_MAP_MUXCONF("lsc1", "displaya", na, driven),
TEGRA_MAP_MUXCONF("lsck", "displaya", na, tristate),
TEGRA_MAP_MUXCONF("lsda", "displaya", na, tristate),
TEGRA_MAP_MUXCONF("slxc", "sdio3", none, driven),
TEGRA_MAP_MUXCONF("spia", "gmi", none, tristate),
TEGRA_MAP_MUXCONF("spic", "gmi", none, tristate),
TEGRA_MAP_MUXCONF("spig", "spi2_alt", none, tristate),
arm/tegra: add support for ventana pinmuxing Add support for ventana pinmuxing as a seaboard derivative. This is a cut down version of work done by Jong Kim <jongk@nvidia.com>. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-10-12 13:53:04 +02:00
};
ARM: tegra: add seaboard, wario and kaen boards This adds board support for the Seaboard eval platform and some of the derivatives that are very similar. Since they only differ in some very minor ways, most of the code is shared. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Colin Cross <ccross@android.com>
2011-02-20 02:25:32 +01:00
arm/tegra: Refactor board-*-pinmux.c to share code This moves the implementation of *_pinmux_init() into a single location. The board-specific pinmux data is left in each board's own file. This will allow future changes that set up the pinmux in a more complex fashion to do so without duplicating that code in each board's pinmux file. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-16 23:12:31 +01:00
static struct tegra_board_pinmux_conf common_conf = {
ARM: tegra: Switch to new pinctrl driver * Rename old pinmux and new pinctrl platform driver and DT match table entries, so the new driver gets instantiated. * Re-write board-pinmux.c, so that it uses pinctrl APIs to configura the pinmux. * Re-write board-*-pinmux.c so that the pinmux configuration tables are in pinctrl format. Ventana's pin mux table needed some edits on top of the basic format conversion, since some mux options that were previously marked as reserved are now valid in the new pinctrl driver. Attempting to use the old reserved names will result in a failure. Specifically, groups lpw0, lpw2, lsc1, lsck, and lsda were changed from function rsvd4 to displaya, and group pta was changed from function rsvd2 to hdmi. All boards' pin mux tables needed some edits on top of the based format conversion, since function i2c was split into i2c1 (first general I2C controller) and i2cp (power I2C controller) to better align function definitions with HW blocks. Due to the split of mux tables into pure mux and pull/tristate tables, many entries in the separate Seaboard/Ventana tables could be merged into the common table, since the entries differed only in the portion in one of the tables, not both. Most pin groups allow configuration of mux, tri-state, and pull. However, some don't allow pull configuration, which is instead configured by new groups that only allow pull configuration. This is a reflection of the true HW capabilities, which weren't fully represented by the old pinmux driver. This required adding new pull table entries for those new groups, and setting many other entries' pull configuration to TEGRA_PINCONFIG_DONT_SET. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Olof Johansson <olof@lixom.net>
2011-12-13 23:21:01 +01:00
.maps = common_map,
.map_count = ARRAY_SIZE(common_map),
arm/tegra: Refactor board-*-pinmux.c to share code This moves the implementation of *_pinmux_init() into a single location. The board-specific pinmux data is left in each board's own file. This will allow future changes that set up the pinmux in a more complex fashion to do so without duplicating that code in each board's pinmux file. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-16 23:12:31 +01:00
};
ARM: tegra: add seaboard, wario and kaen boards This adds board support for the Seaboard eval platform and some of the derivatives that are very similar. Since they only differ in some very minor ways, most of the code is shared. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Colin Cross <ccross@android.com>
2011-02-20 02:25:32 +01:00
arm/tegra: Refactor board-*-pinmux.c to share code This moves the implementation of *_pinmux_init() into a single location. The board-specific pinmux data is left in each board's own file. This will allow future changes that set up the pinmux in a more complex fashion to do so without duplicating that code in each board's pinmux file. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-16 23:12:31 +01:00
static struct tegra_board_pinmux_conf seaboard_conf = {
ARM: tegra: Switch to new pinctrl driver * Rename old pinmux and new pinctrl platform driver and DT match table entries, so the new driver gets instantiated. * Re-write board-pinmux.c, so that it uses pinctrl APIs to configura the pinmux. * Re-write board-*-pinmux.c so that the pinmux configuration tables are in pinctrl format. Ventana's pin mux table needed some edits on top of the basic format conversion, since some mux options that were previously marked as reserved are now valid in the new pinctrl driver. Attempting to use the old reserved names will result in a failure. Specifically, groups lpw0, lpw2, lsc1, lsck, and lsda were changed from function rsvd4 to displaya, and group pta was changed from function rsvd2 to hdmi. All boards' pin mux tables needed some edits on top of the based format conversion, since function i2c was split into i2c1 (first general I2C controller) and i2cp (power I2C controller) to better align function definitions with HW blocks. Due to the split of mux tables into pure mux and pull/tristate tables, many entries in the separate Seaboard/Ventana tables could be merged into the common table, since the entries differed only in the portion in one of the tables, not both. Most pin groups allow configuration of mux, tri-state, and pull. However, some don't allow pull configuration, which is instead configured by new groups that only allow pull configuration. This is a reflection of the true HW capabilities, which weren't fully represented by the old pinmux driver. This required adding new pull table entries for those new groups, and setting many other entries' pull configuration to TEGRA_PINCONFIG_DONT_SET. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Olof Johansson <olof@lixom.net>
2011-12-13 23:21:01 +01:00
.maps = seaboard_map,
.map_count = ARRAY_SIZE(seaboard_map),
arm/tegra: Refactor board-*-pinmux.c to share code This moves the implementation of *_pinmux_init() into a single location. The board-specific pinmux data is left in each board's own file. This will allow future changes that set up the pinmux in a more complex fashion to do so without duplicating that code in each board's pinmux file. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-16 23:12:31 +01:00
};
ARM: tegra: add seaboard, wario and kaen boards This adds board support for the Seaboard eval platform and some of the derivatives that are very similar. Since they only differ in some very minor ways, most of the code is shared. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Colin Cross <ccross@android.com>
2011-02-20 02:25:32 +01:00
arm/tegra: Refactor board-*-pinmux.c to share code This moves the implementation of *_pinmux_init() into a single location. The board-specific pinmux data is left in each board's own file. This will allow future changes that set up the pinmux in a more complex fashion to do so without duplicating that code in each board's pinmux file. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-16 23:12:31 +01:00
static struct tegra_board_pinmux_conf ventana_conf = {
ARM: tegra: Switch to new pinctrl driver * Rename old pinmux and new pinctrl platform driver and DT match table entries, so the new driver gets instantiated. * Re-write board-pinmux.c, so that it uses pinctrl APIs to configura the pinmux. * Re-write board-*-pinmux.c so that the pinmux configuration tables are in pinctrl format. Ventana's pin mux table needed some edits on top of the basic format conversion, since some mux options that were previously marked as reserved are now valid in the new pinctrl driver. Attempting to use the old reserved names will result in a failure. Specifically, groups lpw0, lpw2, lsc1, lsck, and lsda were changed from function rsvd4 to displaya, and group pta was changed from function rsvd2 to hdmi. All boards' pin mux tables needed some edits on top of the based format conversion, since function i2c was split into i2c1 (first general I2C controller) and i2cp (power I2C controller) to better align function definitions with HW blocks. Due to the split of mux tables into pure mux and pull/tristate tables, many entries in the separate Seaboard/Ventana tables could be merged into the common table, since the entries differed only in the portion in one of the tables, not both. Most pin groups allow configuration of mux, tri-state, and pull. However, some don't allow pull configuration, which is instead configured by new groups that only allow pull configuration. This is a reflection of the true HW capabilities, which weren't fully represented by the old pinmux driver. This required adding new pull table entries for those new groups, and setting many other entries' pull configuration to TEGRA_PINCONFIG_DONT_SET. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Olof Johansson <olof@lixom.net>
2011-12-13 23:21:01 +01:00
.maps = ventana_map,
.map_count = ARRAY_SIZE(ventana_map),
arm/tegra: Refactor board-*-pinmux.c to share code This moves the implementation of *_pinmux_init() into a single location. The board-specific pinmux data is left in each board's own file. This will allow future changes that set up the pinmux in a more complex fashion to do so without duplicating that code in each board's pinmux file. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-16 23:12:31 +01:00
};
arm/tegra: prepare Seaboard pinmux code for derived boards This patch splits out the common part of pinmux and GPIO initialization for seaboard and derived boards. This code is based on work done by Jong Kim <jongk@nvidia.com>. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-10-12 13:53:03 +02:00
arm/tegra: Refactor board-*-pinmux.c to share code This moves the implementation of *_pinmux_init() into a single location. The board-specific pinmux data is left in each board's own file. This will allow future changes that set up the pinmux in a more complex fashion to do so without duplicating that code in each board's pinmux file. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-16 23:12:31 +01:00
void seaboard_pinmux_init(void)
arm/tegra: prepare Seaboard pinmux code for derived boards This patch splits out the common part of pinmux and GPIO initialization for seaboard and derived boards. This code is based on work done by Jong Kim <jongk@nvidia.com>. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-10-12 13:53:03 +02:00
{
arm/tegra: Refactor board-*-pinmux.c to share code This moves the implementation of *_pinmux_init() into a single location. The board-specific pinmux data is left in each board's own file. This will allow future changes that set up the pinmux in a more complex fashion to do so without duplicating that code in each board's pinmux file. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-16 23:12:31 +01:00
tegra_board_pinmux_init(&common_conf, &seaboard_conf);
ARM: tegra: add seaboard, wario and kaen boards This adds board support for the Seaboard eval platform and some of the derivatives that are very similar. Since they only differ in some very minor ways, most of the code is shared. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Colin Cross <ccross@android.com>
2011-02-20 02:25:32 +01:00
}
arm/tegra: add support for ventana pinmuxing Add support for ventana pinmuxing as a seaboard derivative. This is a cut down version of work done by Jong Kim <jongk@nvidia.com>. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-10-12 13:53:04 +02:00
arm/tegra: Refactor board-*-pinmux.c to share code This moves the implementation of *_pinmux_init() into a single location. The board-specific pinmux data is left in each board's own file. This will allow future changes that set up the pinmux in a more complex fashion to do so without duplicating that code in each board's pinmux file. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-16 23:12:31 +01:00
void ventana_pinmux_init(void)
arm/tegra: add support for ventana pinmuxing Add support for ventana pinmuxing as a seaboard derivative. This is a cut down version of work done by Jong Kim <jongk@nvidia.com>. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-10-12 13:53:04 +02:00
{
arm/tegra: Refactor board-*-pinmux.c to share code This moves the implementation of *_pinmux_init() into a single location. The board-specific pinmux data is left in each board's own file. This will allow future changes that set up the pinmux in a more complex fashion to do so without duplicating that code in each board's pinmux file. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-16 23:12:31 +01:00
tegra_board_pinmux_init(&common_conf, &ventana_conf);
arm/tegra: add support for ventana pinmuxing Add support for ventana pinmuxing as a seaboard derivative. This is a cut down version of work done by Jong Kim <jongk@nvidia.com>. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-10-12 13:53:04 +02:00
}