linux/drivers/media/dvb/frontends/dib8000.c

2341 lines
73 KiB
C
Raw Normal View History

/*
* Linux-DVB Driver for DiBcom's DiB8000 chip (ISDB-T).
*
* Copyright (C) 2009 DiBcom (http://www.dibcom.fr/)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation, version 2.
*/
#include <linux/kernel.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 09:04:11 +01:00
#include <linux/slab.h>
#include <linux/i2c.h>
#include "dvb_math.h"
#include "dvb_frontend.h"
#include "dib8000.h"
#define LAYER_ALL -1
#define LAYER_A 1
#define LAYER_B 2
#define LAYER_C 3
#define FE_CALLBACK_TIME_NEVER 0xffffffff
static int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "turn on debugging (default: 0)");
#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB8000: "); printk(args); printk("\n"); } } while (0)
#define FE_STATUS_TUNE_FAILED 0
struct i2c_device {
struct i2c_adapter *adap;
u8 addr;
};
struct dib8000_state {
struct dvb_frontend fe;
struct dib8000_config cfg;
struct i2c_device i2c;
struct dibx000_i2c_master i2c_master;
u16 wbd_ref;
u8 current_band;
u32 current_bandwidth;
struct dibx000_agc_config *current_agc;
u32 timf;
u32 timf_default;
u8 div_force_off:1;
u8 div_state:1;
u16 div_sync_wait;
u8 agc_state;
u8 differential_constellation;
u8 diversity_onoff;
s16 ber_monitored_layer;
u16 gpio_dir;
u16 gpio_val;
u16 revision;
u8 isdbt_cfg_loaded;
enum frontend_tune_state tune_state;
u32 status;
};
enum dib8000_power_mode {
DIB8000M_POWER_ALL = 0,
DIB8000M_POWER_INTERFACE_ONLY,
};
static u16 dib8000_i2c_read16(struct i2c_device *i2c, u16 reg)
{
u8 wb[2] = { reg >> 8, reg & 0xff };
u8 rb[2];
struct i2c_msg msg[2] = {
{.addr = i2c->addr >> 1,.flags = 0,.buf = wb,.len = 2},
{.addr = i2c->addr >> 1,.flags = I2C_M_RD,.buf = rb,.len = 2},
};
if (i2c_transfer(i2c->adap, msg, 2) != 2)
dprintk("i2c read error on %d", reg);
return (rb[0] << 8) | rb[1];
}
static u16 dib8000_read_word(struct dib8000_state *state, u16 reg)
{
return dib8000_i2c_read16(&state->i2c, reg);
}
static u32 dib8000_read32(struct dib8000_state *state, u16 reg)
{
u16 rw[2];
rw[0] = dib8000_read_word(state, reg + 0);
rw[1] = dib8000_read_word(state, reg + 1);
return ((rw[0] << 16) | (rw[1]));
}
static int dib8000_i2c_write16(struct i2c_device *i2c, u16 reg, u16 val)
{
u8 b[4] = {
(reg >> 8) & 0xff, reg & 0xff,
(val >> 8) & 0xff, val & 0xff,
};
struct i2c_msg msg = {
.addr = i2c->addr >> 1,.flags = 0,.buf = b,.len = 4
};
return i2c_transfer(i2c->adap, &msg, 1) != 1 ? -EREMOTEIO : 0;
}
static int dib8000_write_word(struct dib8000_state *state, u16 reg, u16 val)
{
return dib8000_i2c_write16(&state->i2c, reg, val);
}
V4L/DVB (13682): dib8000: make some constant static Eliminate the following sparse warnings (see "make C=1"): * dib8000.c:125:15: warning: symbol 'coeff_2k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:130:15: warning: symbol 'coeff_2k_sb_1seg' was not declared. Should it be static? * dib8000.c:134:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:139:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:144:15: warning: symbol 'coeff_2k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:149:15: warning: symbol 'coeff_2k_sb_3seg' was not declared. Should it be static? * dib8000.c:154:15: warning: symbol 'coeff_4k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:159:15: warning: symbol 'coeff_4k_sb_1seg' was not declared. Should it be static? * dib8000.c:164:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:169:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:174:15: warning: symbol 'coeff_4k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:179:15: warning: symbol 'coeff_4k_sb_3seg' was not declared. Should it be static? * dib8000.c:184:15: warning: symbol 'coeff_8k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:189:15: warning: symbol 'coeff_8k_sb_1seg' was not declared. Should it be static? * dib8000.c:194:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:199:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:204:15: warning: symbol 'coeff_8k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:209:15: warning: symbol 'coeff_8k_sb_3seg' was not declared. Should it be static? * dib8000.c:214:15: warning: symbol 'ana_fe_coeff_3seg' was not declared. Should it be static? * dib8000.c:218:15: warning: symbol 'ana_fe_coeff_1seg' was not declared. Should it be static? * dib8000.c:222:15: warning: symbol 'ana_fe_coeff_13seg' was not declared. Should it be static? Cc: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-11 23:35:40 +01:00
static const int16_t coeff_2k_sb_1seg_dqpsk[8] = {
(769 << 5) | 0x0a, (745 << 5) | 0x03, (595 << 5) | 0x0d, (769 << 5) | 0x0a, (920 << 5) | 0x09, (784 << 5) | 0x02, (519 << 5) | 0x0c,
(920 << 5) | 0x09
};
V4L/DVB (13682): dib8000: make some constant static Eliminate the following sparse warnings (see "make C=1"): * dib8000.c:125:15: warning: symbol 'coeff_2k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:130:15: warning: symbol 'coeff_2k_sb_1seg' was not declared. Should it be static? * dib8000.c:134:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:139:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:144:15: warning: symbol 'coeff_2k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:149:15: warning: symbol 'coeff_2k_sb_3seg' was not declared. Should it be static? * dib8000.c:154:15: warning: symbol 'coeff_4k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:159:15: warning: symbol 'coeff_4k_sb_1seg' was not declared. Should it be static? * dib8000.c:164:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:169:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:174:15: warning: symbol 'coeff_4k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:179:15: warning: symbol 'coeff_4k_sb_3seg' was not declared. Should it be static? * dib8000.c:184:15: warning: symbol 'coeff_8k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:189:15: warning: symbol 'coeff_8k_sb_1seg' was not declared. Should it be static? * dib8000.c:194:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:199:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:204:15: warning: symbol 'coeff_8k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:209:15: warning: symbol 'coeff_8k_sb_3seg' was not declared. Should it be static? * dib8000.c:214:15: warning: symbol 'ana_fe_coeff_3seg' was not declared. Should it be static? * dib8000.c:218:15: warning: symbol 'ana_fe_coeff_1seg' was not declared. Should it be static? * dib8000.c:222:15: warning: symbol 'ana_fe_coeff_13seg' was not declared. Should it be static? Cc: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-11 23:35:40 +01:00
static const int16_t coeff_2k_sb_1seg[8] = {
(692 << 5) | 0x0b, (683 << 5) | 0x01, (519 << 5) | 0x09, (692 << 5) | 0x0b, 0 | 0x1f, 0 | 0x1f, 0 | 0x1f, 0 | 0x1f
};
V4L/DVB (13682): dib8000: make some constant static Eliminate the following sparse warnings (see "make C=1"): * dib8000.c:125:15: warning: symbol 'coeff_2k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:130:15: warning: symbol 'coeff_2k_sb_1seg' was not declared. Should it be static? * dib8000.c:134:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:139:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:144:15: warning: symbol 'coeff_2k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:149:15: warning: symbol 'coeff_2k_sb_3seg' was not declared. Should it be static? * dib8000.c:154:15: warning: symbol 'coeff_4k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:159:15: warning: symbol 'coeff_4k_sb_1seg' was not declared. Should it be static? * dib8000.c:164:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:169:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:174:15: warning: symbol 'coeff_4k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:179:15: warning: symbol 'coeff_4k_sb_3seg' was not declared. Should it be static? * dib8000.c:184:15: warning: symbol 'coeff_8k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:189:15: warning: symbol 'coeff_8k_sb_1seg' was not declared. Should it be static? * dib8000.c:194:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:199:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:204:15: warning: symbol 'coeff_8k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:209:15: warning: symbol 'coeff_8k_sb_3seg' was not declared. Should it be static? * dib8000.c:214:15: warning: symbol 'ana_fe_coeff_3seg' was not declared. Should it be static? * dib8000.c:218:15: warning: symbol 'ana_fe_coeff_1seg' was not declared. Should it be static? * dib8000.c:222:15: warning: symbol 'ana_fe_coeff_13seg' was not declared. Should it be static? Cc: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-11 23:35:40 +01:00
static const int16_t coeff_2k_sb_3seg_0dqpsk_1dqpsk[8] = {
(832 << 5) | 0x10, (912 << 5) | 0x05, (900 << 5) | 0x12, (832 << 5) | 0x10, (-931 << 5) | 0x0f, (912 << 5) | 0x04, (807 << 5) | 0x11,
(-931 << 5) | 0x0f
};
V4L/DVB (13682): dib8000: make some constant static Eliminate the following sparse warnings (see "make C=1"): * dib8000.c:125:15: warning: symbol 'coeff_2k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:130:15: warning: symbol 'coeff_2k_sb_1seg' was not declared. Should it be static? * dib8000.c:134:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:139:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:144:15: warning: symbol 'coeff_2k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:149:15: warning: symbol 'coeff_2k_sb_3seg' was not declared. Should it be static? * dib8000.c:154:15: warning: symbol 'coeff_4k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:159:15: warning: symbol 'coeff_4k_sb_1seg' was not declared. Should it be static? * dib8000.c:164:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:169:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:174:15: warning: symbol 'coeff_4k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:179:15: warning: symbol 'coeff_4k_sb_3seg' was not declared. Should it be static? * dib8000.c:184:15: warning: symbol 'coeff_8k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:189:15: warning: symbol 'coeff_8k_sb_1seg' was not declared. Should it be static? * dib8000.c:194:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:199:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:204:15: warning: symbol 'coeff_8k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:209:15: warning: symbol 'coeff_8k_sb_3seg' was not declared. Should it be static? * dib8000.c:214:15: warning: symbol 'ana_fe_coeff_3seg' was not declared. Should it be static? * dib8000.c:218:15: warning: symbol 'ana_fe_coeff_1seg' was not declared. Should it be static? * dib8000.c:222:15: warning: symbol 'ana_fe_coeff_13seg' was not declared. Should it be static? Cc: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-11 23:35:40 +01:00
static const int16_t coeff_2k_sb_3seg_0dqpsk[8] = {
(622 << 5) | 0x0c, (941 << 5) | 0x04, (796 << 5) | 0x10, (622 << 5) | 0x0c, (982 << 5) | 0x0c, (519 << 5) | 0x02, (572 << 5) | 0x0e,
(982 << 5) | 0x0c
};
V4L/DVB (13682): dib8000: make some constant static Eliminate the following sparse warnings (see "make C=1"): * dib8000.c:125:15: warning: symbol 'coeff_2k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:130:15: warning: symbol 'coeff_2k_sb_1seg' was not declared. Should it be static? * dib8000.c:134:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:139:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:144:15: warning: symbol 'coeff_2k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:149:15: warning: symbol 'coeff_2k_sb_3seg' was not declared. Should it be static? * dib8000.c:154:15: warning: symbol 'coeff_4k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:159:15: warning: symbol 'coeff_4k_sb_1seg' was not declared. Should it be static? * dib8000.c:164:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:169:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:174:15: warning: symbol 'coeff_4k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:179:15: warning: symbol 'coeff_4k_sb_3seg' was not declared. Should it be static? * dib8000.c:184:15: warning: symbol 'coeff_8k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:189:15: warning: symbol 'coeff_8k_sb_1seg' was not declared. Should it be static? * dib8000.c:194:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:199:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:204:15: warning: symbol 'coeff_8k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:209:15: warning: symbol 'coeff_8k_sb_3seg' was not declared. Should it be static? * dib8000.c:214:15: warning: symbol 'ana_fe_coeff_3seg' was not declared. Should it be static? * dib8000.c:218:15: warning: symbol 'ana_fe_coeff_1seg' was not declared. Should it be static? * dib8000.c:222:15: warning: symbol 'ana_fe_coeff_13seg' was not declared. Should it be static? Cc: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-11 23:35:40 +01:00
static const int16_t coeff_2k_sb_3seg_1dqpsk[8] = {
(699 << 5) | 0x14, (607 << 5) | 0x04, (944 << 5) | 0x13, (699 << 5) | 0x14, (-720 << 5) | 0x0d, (640 << 5) | 0x03, (866 << 5) | 0x12,
(-720 << 5) | 0x0d
};
V4L/DVB (13682): dib8000: make some constant static Eliminate the following sparse warnings (see "make C=1"): * dib8000.c:125:15: warning: symbol 'coeff_2k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:130:15: warning: symbol 'coeff_2k_sb_1seg' was not declared. Should it be static? * dib8000.c:134:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:139:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:144:15: warning: symbol 'coeff_2k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:149:15: warning: symbol 'coeff_2k_sb_3seg' was not declared. Should it be static? * dib8000.c:154:15: warning: symbol 'coeff_4k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:159:15: warning: symbol 'coeff_4k_sb_1seg' was not declared. Should it be static? * dib8000.c:164:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:169:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:174:15: warning: symbol 'coeff_4k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:179:15: warning: symbol 'coeff_4k_sb_3seg' was not declared. Should it be static? * dib8000.c:184:15: warning: symbol 'coeff_8k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:189:15: warning: symbol 'coeff_8k_sb_1seg' was not declared. Should it be static? * dib8000.c:194:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:199:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:204:15: warning: symbol 'coeff_8k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:209:15: warning: symbol 'coeff_8k_sb_3seg' was not declared. Should it be static? * dib8000.c:214:15: warning: symbol 'ana_fe_coeff_3seg' was not declared. Should it be static? * dib8000.c:218:15: warning: symbol 'ana_fe_coeff_1seg' was not declared. Should it be static? * dib8000.c:222:15: warning: symbol 'ana_fe_coeff_13seg' was not declared. Should it be static? Cc: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-11 23:35:40 +01:00
static const int16_t coeff_2k_sb_3seg[8] = {
(664 << 5) | 0x0c, (925 << 5) | 0x03, (937 << 5) | 0x10, (664 << 5) | 0x0c, (-610 << 5) | 0x0a, (697 << 5) | 0x01, (836 << 5) | 0x0e,
(-610 << 5) | 0x0a
};
V4L/DVB (13682): dib8000: make some constant static Eliminate the following sparse warnings (see "make C=1"): * dib8000.c:125:15: warning: symbol 'coeff_2k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:130:15: warning: symbol 'coeff_2k_sb_1seg' was not declared. Should it be static? * dib8000.c:134:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:139:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:144:15: warning: symbol 'coeff_2k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:149:15: warning: symbol 'coeff_2k_sb_3seg' was not declared. Should it be static? * dib8000.c:154:15: warning: symbol 'coeff_4k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:159:15: warning: symbol 'coeff_4k_sb_1seg' was not declared. Should it be static? * dib8000.c:164:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:169:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:174:15: warning: symbol 'coeff_4k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:179:15: warning: symbol 'coeff_4k_sb_3seg' was not declared. Should it be static? * dib8000.c:184:15: warning: symbol 'coeff_8k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:189:15: warning: symbol 'coeff_8k_sb_1seg' was not declared. Should it be static? * dib8000.c:194:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:199:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:204:15: warning: symbol 'coeff_8k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:209:15: warning: symbol 'coeff_8k_sb_3seg' was not declared. Should it be static? * dib8000.c:214:15: warning: symbol 'ana_fe_coeff_3seg' was not declared. Should it be static? * dib8000.c:218:15: warning: symbol 'ana_fe_coeff_1seg' was not declared. Should it be static? * dib8000.c:222:15: warning: symbol 'ana_fe_coeff_13seg' was not declared. Should it be static? Cc: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-11 23:35:40 +01:00
static const int16_t coeff_4k_sb_1seg_dqpsk[8] = {
(-955 << 5) | 0x0e, (687 << 5) | 0x04, (818 << 5) | 0x10, (-955 << 5) | 0x0e, (-922 << 5) | 0x0d, (750 << 5) | 0x03, (665 << 5) | 0x0f,
(-922 << 5) | 0x0d
};
V4L/DVB (13682): dib8000: make some constant static Eliminate the following sparse warnings (see "make C=1"): * dib8000.c:125:15: warning: symbol 'coeff_2k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:130:15: warning: symbol 'coeff_2k_sb_1seg' was not declared. Should it be static? * dib8000.c:134:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:139:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:144:15: warning: symbol 'coeff_2k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:149:15: warning: symbol 'coeff_2k_sb_3seg' was not declared. Should it be static? * dib8000.c:154:15: warning: symbol 'coeff_4k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:159:15: warning: symbol 'coeff_4k_sb_1seg' was not declared. Should it be static? * dib8000.c:164:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:169:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:174:15: warning: symbol 'coeff_4k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:179:15: warning: symbol 'coeff_4k_sb_3seg' was not declared. Should it be static? * dib8000.c:184:15: warning: symbol 'coeff_8k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:189:15: warning: symbol 'coeff_8k_sb_1seg' was not declared. Should it be static? * dib8000.c:194:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:199:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:204:15: warning: symbol 'coeff_8k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:209:15: warning: symbol 'coeff_8k_sb_3seg' was not declared. Should it be static? * dib8000.c:214:15: warning: symbol 'ana_fe_coeff_3seg' was not declared. Should it be static? * dib8000.c:218:15: warning: symbol 'ana_fe_coeff_1seg' was not declared. Should it be static? * dib8000.c:222:15: warning: symbol 'ana_fe_coeff_13seg' was not declared. Should it be static? Cc: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-11 23:35:40 +01:00
static const int16_t coeff_4k_sb_1seg[8] = {
(638 << 5) | 0x0d, (683 << 5) | 0x02, (638 << 5) | 0x0d, (638 << 5) | 0x0d, (-655 << 5) | 0x0a, (517 << 5) | 0x00, (698 << 5) | 0x0d,
(-655 << 5) | 0x0a
};
V4L/DVB (13682): dib8000: make some constant static Eliminate the following sparse warnings (see "make C=1"): * dib8000.c:125:15: warning: symbol 'coeff_2k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:130:15: warning: symbol 'coeff_2k_sb_1seg' was not declared. Should it be static? * dib8000.c:134:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:139:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:144:15: warning: symbol 'coeff_2k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:149:15: warning: symbol 'coeff_2k_sb_3seg' was not declared. Should it be static? * dib8000.c:154:15: warning: symbol 'coeff_4k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:159:15: warning: symbol 'coeff_4k_sb_1seg' was not declared. Should it be static? * dib8000.c:164:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:169:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:174:15: warning: symbol 'coeff_4k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:179:15: warning: symbol 'coeff_4k_sb_3seg' was not declared. Should it be static? * dib8000.c:184:15: warning: symbol 'coeff_8k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:189:15: warning: symbol 'coeff_8k_sb_1seg' was not declared. Should it be static? * dib8000.c:194:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:199:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:204:15: warning: symbol 'coeff_8k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:209:15: warning: symbol 'coeff_8k_sb_3seg' was not declared. Should it be static? * dib8000.c:214:15: warning: symbol 'ana_fe_coeff_3seg' was not declared. Should it be static? * dib8000.c:218:15: warning: symbol 'ana_fe_coeff_1seg' was not declared. Should it be static? * dib8000.c:222:15: warning: symbol 'ana_fe_coeff_13seg' was not declared. Should it be static? Cc: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-11 23:35:40 +01:00
static const int16_t coeff_4k_sb_3seg_0dqpsk_1dqpsk[8] = {
(-707 << 5) | 0x14, (910 << 5) | 0x06, (889 << 5) | 0x16, (-707 << 5) | 0x14, (-958 << 5) | 0x13, (993 << 5) | 0x05, (523 << 5) | 0x14,
(-958 << 5) | 0x13
};
V4L/DVB (13682): dib8000: make some constant static Eliminate the following sparse warnings (see "make C=1"): * dib8000.c:125:15: warning: symbol 'coeff_2k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:130:15: warning: symbol 'coeff_2k_sb_1seg' was not declared. Should it be static? * dib8000.c:134:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:139:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:144:15: warning: symbol 'coeff_2k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:149:15: warning: symbol 'coeff_2k_sb_3seg' was not declared. Should it be static? * dib8000.c:154:15: warning: symbol 'coeff_4k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:159:15: warning: symbol 'coeff_4k_sb_1seg' was not declared. Should it be static? * dib8000.c:164:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:169:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:174:15: warning: symbol 'coeff_4k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:179:15: warning: symbol 'coeff_4k_sb_3seg' was not declared. Should it be static? * dib8000.c:184:15: warning: symbol 'coeff_8k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:189:15: warning: symbol 'coeff_8k_sb_1seg' was not declared. Should it be static? * dib8000.c:194:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:199:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:204:15: warning: symbol 'coeff_8k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:209:15: warning: symbol 'coeff_8k_sb_3seg' was not declared. Should it be static? * dib8000.c:214:15: warning: symbol 'ana_fe_coeff_3seg' was not declared. Should it be static? * dib8000.c:218:15: warning: symbol 'ana_fe_coeff_1seg' was not declared. Should it be static? * dib8000.c:222:15: warning: symbol 'ana_fe_coeff_13seg' was not declared. Should it be static? Cc: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-11 23:35:40 +01:00
static const int16_t coeff_4k_sb_3seg_0dqpsk[8] = {
(-723 << 5) | 0x13, (910 << 5) | 0x05, (777 << 5) | 0x14, (-723 << 5) | 0x13, (-568 << 5) | 0x0f, (547 << 5) | 0x03, (696 << 5) | 0x12,
(-568 << 5) | 0x0f
};
V4L/DVB (13682): dib8000: make some constant static Eliminate the following sparse warnings (see "make C=1"): * dib8000.c:125:15: warning: symbol 'coeff_2k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:130:15: warning: symbol 'coeff_2k_sb_1seg' was not declared. Should it be static? * dib8000.c:134:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:139:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:144:15: warning: symbol 'coeff_2k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:149:15: warning: symbol 'coeff_2k_sb_3seg' was not declared. Should it be static? * dib8000.c:154:15: warning: symbol 'coeff_4k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:159:15: warning: symbol 'coeff_4k_sb_1seg' was not declared. Should it be static? * dib8000.c:164:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:169:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:174:15: warning: symbol 'coeff_4k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:179:15: warning: symbol 'coeff_4k_sb_3seg' was not declared. Should it be static? * dib8000.c:184:15: warning: symbol 'coeff_8k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:189:15: warning: symbol 'coeff_8k_sb_1seg' was not declared. Should it be static? * dib8000.c:194:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:199:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:204:15: warning: symbol 'coeff_8k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:209:15: warning: symbol 'coeff_8k_sb_3seg' was not declared. Should it be static? * dib8000.c:214:15: warning: symbol 'ana_fe_coeff_3seg' was not declared. Should it be static? * dib8000.c:218:15: warning: symbol 'ana_fe_coeff_1seg' was not declared. Should it be static? * dib8000.c:222:15: warning: symbol 'ana_fe_coeff_13seg' was not declared. Should it be static? Cc: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-11 23:35:40 +01:00
static const int16_t coeff_4k_sb_3seg_1dqpsk[8] = {
(-940 << 5) | 0x15, (607 << 5) | 0x05, (915 << 5) | 0x16, (-940 << 5) | 0x15, (-848 << 5) | 0x13, (683 << 5) | 0x04, (543 << 5) | 0x14,
(-848 << 5) | 0x13
};
V4L/DVB (13682): dib8000: make some constant static Eliminate the following sparse warnings (see "make C=1"): * dib8000.c:125:15: warning: symbol 'coeff_2k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:130:15: warning: symbol 'coeff_2k_sb_1seg' was not declared. Should it be static? * dib8000.c:134:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:139:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:144:15: warning: symbol 'coeff_2k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:149:15: warning: symbol 'coeff_2k_sb_3seg' was not declared. Should it be static? * dib8000.c:154:15: warning: symbol 'coeff_4k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:159:15: warning: symbol 'coeff_4k_sb_1seg' was not declared. Should it be static? * dib8000.c:164:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:169:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:174:15: warning: symbol 'coeff_4k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:179:15: warning: symbol 'coeff_4k_sb_3seg' was not declared. Should it be static? * dib8000.c:184:15: warning: symbol 'coeff_8k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:189:15: warning: symbol 'coeff_8k_sb_1seg' was not declared. Should it be static? * dib8000.c:194:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:199:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:204:15: warning: symbol 'coeff_8k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:209:15: warning: symbol 'coeff_8k_sb_3seg' was not declared. Should it be static? * dib8000.c:214:15: warning: symbol 'ana_fe_coeff_3seg' was not declared. Should it be static? * dib8000.c:218:15: warning: symbol 'ana_fe_coeff_1seg' was not declared. Should it be static? * dib8000.c:222:15: warning: symbol 'ana_fe_coeff_13seg' was not declared. Should it be static? Cc: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-11 23:35:40 +01:00
static const int16_t coeff_4k_sb_3seg[8] = {
(612 << 5) | 0x12, (910 << 5) | 0x04, (864 << 5) | 0x14, (612 << 5) | 0x12, (-869 << 5) | 0x13, (683 << 5) | 0x02, (869 << 5) | 0x12,
(-869 << 5) | 0x13
};
V4L/DVB (13682): dib8000: make some constant static Eliminate the following sparse warnings (see "make C=1"): * dib8000.c:125:15: warning: symbol 'coeff_2k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:130:15: warning: symbol 'coeff_2k_sb_1seg' was not declared. Should it be static? * dib8000.c:134:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:139:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:144:15: warning: symbol 'coeff_2k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:149:15: warning: symbol 'coeff_2k_sb_3seg' was not declared. Should it be static? * dib8000.c:154:15: warning: symbol 'coeff_4k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:159:15: warning: symbol 'coeff_4k_sb_1seg' was not declared. Should it be static? * dib8000.c:164:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:169:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:174:15: warning: symbol 'coeff_4k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:179:15: warning: symbol 'coeff_4k_sb_3seg' was not declared. Should it be static? * dib8000.c:184:15: warning: symbol 'coeff_8k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:189:15: warning: symbol 'coeff_8k_sb_1seg' was not declared. Should it be static? * dib8000.c:194:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:199:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:204:15: warning: symbol 'coeff_8k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:209:15: warning: symbol 'coeff_8k_sb_3seg' was not declared. Should it be static? * dib8000.c:214:15: warning: symbol 'ana_fe_coeff_3seg' was not declared. Should it be static? * dib8000.c:218:15: warning: symbol 'ana_fe_coeff_1seg' was not declared. Should it be static? * dib8000.c:222:15: warning: symbol 'ana_fe_coeff_13seg' was not declared. Should it be static? Cc: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-11 23:35:40 +01:00
static const int16_t coeff_8k_sb_1seg_dqpsk[8] = {
(-835 << 5) | 0x12, (684 << 5) | 0x05, (735 << 5) | 0x14, (-835 << 5) | 0x12, (-598 << 5) | 0x10, (781 << 5) | 0x04, (739 << 5) | 0x13,
(-598 << 5) | 0x10
};
V4L/DVB (13682): dib8000: make some constant static Eliminate the following sparse warnings (see "make C=1"): * dib8000.c:125:15: warning: symbol 'coeff_2k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:130:15: warning: symbol 'coeff_2k_sb_1seg' was not declared. Should it be static? * dib8000.c:134:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:139:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:144:15: warning: symbol 'coeff_2k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:149:15: warning: symbol 'coeff_2k_sb_3seg' was not declared. Should it be static? * dib8000.c:154:15: warning: symbol 'coeff_4k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:159:15: warning: symbol 'coeff_4k_sb_1seg' was not declared. Should it be static? * dib8000.c:164:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:169:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:174:15: warning: symbol 'coeff_4k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:179:15: warning: symbol 'coeff_4k_sb_3seg' was not declared. Should it be static? * dib8000.c:184:15: warning: symbol 'coeff_8k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:189:15: warning: symbol 'coeff_8k_sb_1seg' was not declared. Should it be static? * dib8000.c:194:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:199:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:204:15: warning: symbol 'coeff_8k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:209:15: warning: symbol 'coeff_8k_sb_3seg' was not declared. Should it be static? * dib8000.c:214:15: warning: symbol 'ana_fe_coeff_3seg' was not declared. Should it be static? * dib8000.c:218:15: warning: symbol 'ana_fe_coeff_1seg' was not declared. Should it be static? * dib8000.c:222:15: warning: symbol 'ana_fe_coeff_13seg' was not declared. Should it be static? Cc: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-11 23:35:40 +01:00
static const int16_t coeff_8k_sb_1seg[8] = {
(673 << 5) | 0x0f, (683 << 5) | 0x03, (808 << 5) | 0x12, (673 << 5) | 0x0f, (585 << 5) | 0x0f, (512 << 5) | 0x01, (780 << 5) | 0x0f,
(585 << 5) | 0x0f
};
V4L/DVB (13682): dib8000: make some constant static Eliminate the following sparse warnings (see "make C=1"): * dib8000.c:125:15: warning: symbol 'coeff_2k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:130:15: warning: symbol 'coeff_2k_sb_1seg' was not declared. Should it be static? * dib8000.c:134:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:139:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:144:15: warning: symbol 'coeff_2k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:149:15: warning: symbol 'coeff_2k_sb_3seg' was not declared. Should it be static? * dib8000.c:154:15: warning: symbol 'coeff_4k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:159:15: warning: symbol 'coeff_4k_sb_1seg' was not declared. Should it be static? * dib8000.c:164:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:169:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:174:15: warning: symbol 'coeff_4k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:179:15: warning: symbol 'coeff_4k_sb_3seg' was not declared. Should it be static? * dib8000.c:184:15: warning: symbol 'coeff_8k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:189:15: warning: symbol 'coeff_8k_sb_1seg' was not declared. Should it be static? * dib8000.c:194:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:199:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:204:15: warning: symbol 'coeff_8k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:209:15: warning: symbol 'coeff_8k_sb_3seg' was not declared. Should it be static? * dib8000.c:214:15: warning: symbol 'ana_fe_coeff_3seg' was not declared. Should it be static? * dib8000.c:218:15: warning: symbol 'ana_fe_coeff_1seg' was not declared. Should it be static? * dib8000.c:222:15: warning: symbol 'ana_fe_coeff_13seg' was not declared. Should it be static? Cc: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-11 23:35:40 +01:00
static const int16_t coeff_8k_sb_3seg_0dqpsk_1dqpsk[8] = {
(863 << 5) | 0x17, (930 << 5) | 0x07, (878 << 5) | 0x19, (863 << 5) | 0x17, (0 << 5) | 0x14, (521 << 5) | 0x05, (980 << 5) | 0x18,
(0 << 5) | 0x14
};
V4L/DVB (13682): dib8000: make some constant static Eliminate the following sparse warnings (see "make C=1"): * dib8000.c:125:15: warning: symbol 'coeff_2k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:130:15: warning: symbol 'coeff_2k_sb_1seg' was not declared. Should it be static? * dib8000.c:134:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:139:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:144:15: warning: symbol 'coeff_2k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:149:15: warning: symbol 'coeff_2k_sb_3seg' was not declared. Should it be static? * dib8000.c:154:15: warning: symbol 'coeff_4k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:159:15: warning: symbol 'coeff_4k_sb_1seg' was not declared. Should it be static? * dib8000.c:164:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:169:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:174:15: warning: symbol 'coeff_4k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:179:15: warning: symbol 'coeff_4k_sb_3seg' was not declared. Should it be static? * dib8000.c:184:15: warning: symbol 'coeff_8k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:189:15: warning: symbol 'coeff_8k_sb_1seg' was not declared. Should it be static? * dib8000.c:194:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:199:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:204:15: warning: symbol 'coeff_8k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:209:15: warning: symbol 'coeff_8k_sb_3seg' was not declared. Should it be static? * dib8000.c:214:15: warning: symbol 'ana_fe_coeff_3seg' was not declared. Should it be static? * dib8000.c:218:15: warning: symbol 'ana_fe_coeff_1seg' was not declared. Should it be static? * dib8000.c:222:15: warning: symbol 'ana_fe_coeff_13seg' was not declared. Should it be static? Cc: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-11 23:35:40 +01:00
static const int16_t coeff_8k_sb_3seg_0dqpsk[8] = {
(-924 << 5) | 0x17, (910 << 5) | 0x06, (774 << 5) | 0x17, (-924 << 5) | 0x17, (-877 << 5) | 0x15, (565 << 5) | 0x04, (553 << 5) | 0x15,
(-877 << 5) | 0x15
};
V4L/DVB (13682): dib8000: make some constant static Eliminate the following sparse warnings (see "make C=1"): * dib8000.c:125:15: warning: symbol 'coeff_2k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:130:15: warning: symbol 'coeff_2k_sb_1seg' was not declared. Should it be static? * dib8000.c:134:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:139:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:144:15: warning: symbol 'coeff_2k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:149:15: warning: symbol 'coeff_2k_sb_3seg' was not declared. Should it be static? * dib8000.c:154:15: warning: symbol 'coeff_4k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:159:15: warning: symbol 'coeff_4k_sb_1seg' was not declared. Should it be static? * dib8000.c:164:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:169:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:174:15: warning: symbol 'coeff_4k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:179:15: warning: symbol 'coeff_4k_sb_3seg' was not declared. Should it be static? * dib8000.c:184:15: warning: symbol 'coeff_8k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:189:15: warning: symbol 'coeff_8k_sb_1seg' was not declared. Should it be static? * dib8000.c:194:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:199:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:204:15: warning: symbol 'coeff_8k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:209:15: warning: symbol 'coeff_8k_sb_3seg' was not declared. Should it be static? * dib8000.c:214:15: warning: symbol 'ana_fe_coeff_3seg' was not declared. Should it be static? * dib8000.c:218:15: warning: symbol 'ana_fe_coeff_1seg' was not declared. Should it be static? * dib8000.c:222:15: warning: symbol 'ana_fe_coeff_13seg' was not declared. Should it be static? Cc: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-11 23:35:40 +01:00
static const int16_t coeff_8k_sb_3seg_1dqpsk[8] = {
(-921 << 5) | 0x19, (607 << 5) | 0x06, (881 << 5) | 0x19, (-921 << 5) | 0x19, (-921 << 5) | 0x14, (713 << 5) | 0x05, (1018 << 5) | 0x18,
(-921 << 5) | 0x14
};
V4L/DVB (13682): dib8000: make some constant static Eliminate the following sparse warnings (see "make C=1"): * dib8000.c:125:15: warning: symbol 'coeff_2k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:130:15: warning: symbol 'coeff_2k_sb_1seg' was not declared. Should it be static? * dib8000.c:134:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:139:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:144:15: warning: symbol 'coeff_2k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:149:15: warning: symbol 'coeff_2k_sb_3seg' was not declared. Should it be static? * dib8000.c:154:15: warning: symbol 'coeff_4k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:159:15: warning: symbol 'coeff_4k_sb_1seg' was not declared. Should it be static? * dib8000.c:164:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:169:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:174:15: warning: symbol 'coeff_4k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:179:15: warning: symbol 'coeff_4k_sb_3seg' was not declared. Should it be static? * dib8000.c:184:15: warning: symbol 'coeff_8k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:189:15: warning: symbol 'coeff_8k_sb_1seg' was not declared. Should it be static? * dib8000.c:194:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:199:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:204:15: warning: symbol 'coeff_8k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:209:15: warning: symbol 'coeff_8k_sb_3seg' was not declared. Should it be static? * dib8000.c:214:15: warning: symbol 'ana_fe_coeff_3seg' was not declared. Should it be static? * dib8000.c:218:15: warning: symbol 'ana_fe_coeff_1seg' was not declared. Should it be static? * dib8000.c:222:15: warning: symbol 'ana_fe_coeff_13seg' was not declared. Should it be static? Cc: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-11 23:35:40 +01:00
static const int16_t coeff_8k_sb_3seg[8] = {
(514 << 5) | 0x14, (910 << 5) | 0x05, (861 << 5) | 0x17, (514 << 5) | 0x14, (690 << 5) | 0x14, (683 << 5) | 0x03, (662 << 5) | 0x15,
(690 << 5) | 0x14
};
V4L/DVB (13682): dib8000: make some constant static Eliminate the following sparse warnings (see "make C=1"): * dib8000.c:125:15: warning: symbol 'coeff_2k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:130:15: warning: symbol 'coeff_2k_sb_1seg' was not declared. Should it be static? * dib8000.c:134:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:139:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:144:15: warning: symbol 'coeff_2k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:149:15: warning: symbol 'coeff_2k_sb_3seg' was not declared. Should it be static? * dib8000.c:154:15: warning: symbol 'coeff_4k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:159:15: warning: symbol 'coeff_4k_sb_1seg' was not declared. Should it be static? * dib8000.c:164:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:169:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:174:15: warning: symbol 'coeff_4k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:179:15: warning: symbol 'coeff_4k_sb_3seg' was not declared. Should it be static? * dib8000.c:184:15: warning: symbol 'coeff_8k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:189:15: warning: symbol 'coeff_8k_sb_1seg' was not declared. Should it be static? * dib8000.c:194:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:199:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:204:15: warning: symbol 'coeff_8k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:209:15: warning: symbol 'coeff_8k_sb_3seg' was not declared. Should it be static? * dib8000.c:214:15: warning: symbol 'ana_fe_coeff_3seg' was not declared. Should it be static? * dib8000.c:218:15: warning: symbol 'ana_fe_coeff_1seg' was not declared. Should it be static? * dib8000.c:222:15: warning: symbol 'ana_fe_coeff_13seg' was not declared. Should it be static? Cc: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-11 23:35:40 +01:00
static const int16_t ana_fe_coeff_3seg[24] = {
81, 80, 78, 74, 68, 61, 54, 45, 37, 28, 19, 11, 4, 1022, 1017, 1013, 1010, 1008, 1008, 1008, 1008, 1010, 1014, 1017
};
V4L/DVB (13682): dib8000: make some constant static Eliminate the following sparse warnings (see "make C=1"): * dib8000.c:125:15: warning: symbol 'coeff_2k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:130:15: warning: symbol 'coeff_2k_sb_1seg' was not declared. Should it be static? * dib8000.c:134:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:139:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:144:15: warning: symbol 'coeff_2k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:149:15: warning: symbol 'coeff_2k_sb_3seg' was not declared. Should it be static? * dib8000.c:154:15: warning: symbol 'coeff_4k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:159:15: warning: symbol 'coeff_4k_sb_1seg' was not declared. Should it be static? * dib8000.c:164:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:169:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:174:15: warning: symbol 'coeff_4k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:179:15: warning: symbol 'coeff_4k_sb_3seg' was not declared. Should it be static? * dib8000.c:184:15: warning: symbol 'coeff_8k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:189:15: warning: symbol 'coeff_8k_sb_1seg' was not declared. Should it be static? * dib8000.c:194:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:199:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:204:15: warning: symbol 'coeff_8k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:209:15: warning: symbol 'coeff_8k_sb_3seg' was not declared. Should it be static? * dib8000.c:214:15: warning: symbol 'ana_fe_coeff_3seg' was not declared. Should it be static? * dib8000.c:218:15: warning: symbol 'ana_fe_coeff_1seg' was not declared. Should it be static? * dib8000.c:222:15: warning: symbol 'ana_fe_coeff_13seg' was not declared. Should it be static? Cc: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-11 23:35:40 +01:00
static const int16_t ana_fe_coeff_1seg[24] = {
249, 226, 164, 82, 5, 981, 970, 988, 1018, 20, 31, 26, 8, 1012, 1000, 1018, 1012, 8, 15, 14, 9, 3, 1017, 1003
};
V4L/DVB (13682): dib8000: make some constant static Eliminate the following sparse warnings (see "make C=1"): * dib8000.c:125:15: warning: symbol 'coeff_2k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:130:15: warning: symbol 'coeff_2k_sb_1seg' was not declared. Should it be static? * dib8000.c:134:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:139:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:144:15: warning: symbol 'coeff_2k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:149:15: warning: symbol 'coeff_2k_sb_3seg' was not declared. Should it be static? * dib8000.c:154:15: warning: symbol 'coeff_4k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:159:15: warning: symbol 'coeff_4k_sb_1seg' was not declared. Should it be static? * dib8000.c:164:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:169:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:174:15: warning: symbol 'coeff_4k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:179:15: warning: symbol 'coeff_4k_sb_3seg' was not declared. Should it be static? * dib8000.c:184:15: warning: symbol 'coeff_8k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:189:15: warning: symbol 'coeff_8k_sb_1seg' was not declared. Should it be static? * dib8000.c:194:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:199:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:204:15: warning: symbol 'coeff_8k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:209:15: warning: symbol 'coeff_8k_sb_3seg' was not declared. Should it be static? * dib8000.c:214:15: warning: symbol 'ana_fe_coeff_3seg' was not declared. Should it be static? * dib8000.c:218:15: warning: symbol 'ana_fe_coeff_1seg' was not declared. Should it be static? * dib8000.c:222:15: warning: symbol 'ana_fe_coeff_13seg' was not declared. Should it be static? Cc: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-11 23:35:40 +01:00
static const int16_t ana_fe_coeff_13seg[24] = {
396, 305, 105, -51, -77, -12, 41, 31, -11, -30, -11, 14, 15, -2, -13, -7, 5, 8, 1, -6, -7, -3, 0, 1
};
static u16 fft_to_mode(struct dib8000_state *state)
{
u16 mode;
switch (state->fe.dtv_property_cache.transmission_mode) {
case TRANSMISSION_MODE_2K:
mode = 1;
break;
case TRANSMISSION_MODE_4K:
mode = 2;
break;
default:
case TRANSMISSION_MODE_AUTO:
case TRANSMISSION_MODE_8K:
mode = 3;
break;
}
return mode;
}
static void dib8000_set_acquisition_mode(struct dib8000_state *state)
{
u16 nud = dib8000_read_word(state, 298);
nud |= (1 << 3) | (1 << 0);
dprintk("acquisition mode activated");
dib8000_write_word(state, 298, nud);
}
static int dib8000_set_output_mode(struct dib8000_state *state, int mode)
{
u16 outreg, fifo_threshold, smo_mode, sram = 0x0205; /* by default SDRAM deintlv is enabled */
outreg = 0;
fifo_threshold = 1792;
smo_mode = (dib8000_read_word(state, 299) & 0x0050) | (1 << 1);
dprintk("-I- Setting output mode for demod %p to %d", &state->fe, mode);
switch (mode) {
case OUTMODE_MPEG2_PAR_GATED_CLK: // STBs with parallel gated clock
outreg = (1 << 10); /* 0x0400 */
break;
case OUTMODE_MPEG2_PAR_CONT_CLK: // STBs with parallel continues clock
outreg = (1 << 10) | (1 << 6); /* 0x0440 */
break;
case OUTMODE_MPEG2_SERIAL: // STBs with serial input
outreg = (1 << 10) | (2 << 6) | (0 << 1); /* 0x0482 */
break;
case OUTMODE_DIVERSITY:
if (state->cfg.hostbus_diversity) {
outreg = (1 << 10) | (4 << 6); /* 0x0500 */
sram &= 0xfdff;
} else
sram |= 0x0c00;
break;
case OUTMODE_MPEG2_FIFO: // e.g. USB feeding
smo_mode |= (3 << 1);
fifo_threshold = 512;
outreg = (1 << 10) | (5 << 6);
break;
case OUTMODE_HIGH_Z: // disable
outreg = 0;
break;
case OUTMODE_ANALOG_ADC:
outreg = (1 << 10) | (3 << 6);
dib8000_set_acquisition_mode(state);
break;
default:
dprintk("Unhandled output_mode passed to be set for demod %p", &state->fe);
return -EINVAL;
}
if (state->cfg.output_mpeg2_in_188_bytes)
smo_mode |= (1 << 5);
dib8000_write_word(state, 299, smo_mode);
dib8000_write_word(state, 300, fifo_threshold); /* synchronous fread */
dib8000_write_word(state, 1286, outreg);
dib8000_write_word(state, 1291, sram);
return 0;
}
static int dib8000_set_diversity_in(struct dvb_frontend *fe, int onoff)
{
struct dib8000_state *state = fe->demodulator_priv;
u16 sync_wait = dib8000_read_word(state, 273) & 0xfff0;
if (!state->differential_constellation) {
dib8000_write_word(state, 272, 1 << 9); //dvsy_off_lmod4 = 1
dib8000_write_word(state, 273, sync_wait | (1 << 2) | 2); // sync_enable = 1; comb_mode = 2
} else {
dib8000_write_word(state, 272, 0); //dvsy_off_lmod4 = 0
dib8000_write_word(state, 273, sync_wait); // sync_enable = 0; comb_mode = 0
}
state->diversity_onoff = onoff;
switch (onoff) {
case 0: /* only use the internal way - not the diversity input */
dib8000_write_word(state, 270, 1);
dib8000_write_word(state, 271, 0);
break;
case 1: /* both ways */
dib8000_write_word(state, 270, 6);
dib8000_write_word(state, 271, 6);
break;
case 2: /* only the diversity input */
dib8000_write_word(state, 270, 0);
dib8000_write_word(state, 271, 1);
break;
}
return 0;
}
static void dib8000_set_power_mode(struct dib8000_state *state, enum dib8000_power_mode mode)
{
/* by default everything is going to be powered off */
u16 reg_774 = 0x3fff, reg_775 = 0xffff, reg_776 = 0xffff,
reg_900 = (dib8000_read_word(state, 900) & 0xfffc) | 0x3, reg_1280 = (dib8000_read_word(state, 1280) & 0x00ff) | 0xff00;
/* now, depending on the requested mode, we power on */
switch (mode) {
/* power up everything in the demod */
case DIB8000M_POWER_ALL:
reg_774 = 0x0000;
reg_775 = 0x0000;
reg_776 = 0x0000;
reg_900 &= 0xfffc;
reg_1280 &= 0x00ff;
break;
case DIB8000M_POWER_INTERFACE_ONLY:
reg_1280 &= 0x00ff;
break;
}
dprintk("powermode : 774 : %x ; 775 : %x; 776 : %x ; 900 : %x; 1280 : %x", reg_774, reg_775, reg_776, reg_900, reg_1280);
dib8000_write_word(state, 774, reg_774);
dib8000_write_word(state, 775, reg_775);
dib8000_write_word(state, 776, reg_776);
dib8000_write_word(state, 900, reg_900);
dib8000_write_word(state, 1280, reg_1280);
}
static int dib8000_set_adc_state(struct dib8000_state *state, enum dibx000_adc_states no)
{
int ret = 0;
u16 reg_907 = dib8000_read_word(state, 907), reg_908 = dib8000_read_word(state, 908);
switch (no) {
case DIBX000_SLOW_ADC_ON:
reg_908 |= (1 << 1) | (1 << 0);
ret |= dib8000_write_word(state, 908, reg_908);
reg_908 &= ~(1 << 1);
break;
case DIBX000_SLOW_ADC_OFF:
reg_908 |= (1 << 1) | (1 << 0);
break;
case DIBX000_ADC_ON:
reg_907 &= 0x0fff;
reg_908 &= 0x0003;
break;
case DIBX000_ADC_OFF: // leave the VBG voltage on
reg_907 |= (1 << 14) | (1 << 13) | (1 << 12);
reg_908 |= (1 << 5) | (1 << 4) | (1 << 3) | (1 << 2);
break;
case DIBX000_VBG_ENABLE:
reg_907 &= ~(1 << 15);
break;
case DIBX000_VBG_DISABLE:
reg_907 |= (1 << 15);
break;
default:
break;
}
ret |= dib8000_write_word(state, 907, reg_907);
ret |= dib8000_write_word(state, 908, reg_908);
return ret;
}
static int dib8000_set_bandwidth(struct dib8000_state *state, u32 bw)
{
u32 timf;
if (bw == 0)
bw = 6000;
if (state->timf == 0) {
dprintk("using default timf");
timf = state->timf_default;
} else {
dprintk("using updated timf");
timf = state->timf;
}
dib8000_write_word(state, 29, (u16) ((timf >> 16) & 0xffff));
dib8000_write_word(state, 30, (u16) ((timf) & 0xffff));
return 0;
}
static int dib8000_sad_calib(struct dib8000_state *state)
{
/* internal */
dib8000_write_word(state, 923, (0 << 1) | (0 << 0));
dib8000_write_word(state, 924, 776); // 0.625*3.3 / 4096
/* do the calibration */
dib8000_write_word(state, 923, (1 << 0));
dib8000_write_word(state, 923, (0 << 0));
msleep(1);
return 0;
}
int dib8000_set_wbd_ref(struct dvb_frontend *fe, u16 value)
{
struct dib8000_state *state = fe->demodulator_priv;
if (value > 4095)
value = 4095;
state->wbd_ref = value;
return dib8000_write_word(state, 106, value);
}
EXPORT_SYMBOL(dib8000_set_wbd_ref);
static void dib8000_reset_pll_common(struct dib8000_state *state, const struct dibx000_bandwidth_config *bw)
{
dprintk("ifreq: %d %x, inversion: %d", bw->ifreq, bw->ifreq, bw->ifreq >> 25);
dib8000_write_word(state, 23, (u16) (((bw->internal * 1000) >> 16) & 0xffff)); /* P_sec_len */
dib8000_write_word(state, 24, (u16) ((bw->internal * 1000) & 0xffff));
dib8000_write_word(state, 27, (u16) ((bw->ifreq >> 16) & 0x01ff));
dib8000_write_word(state, 28, (u16) (bw->ifreq & 0xffff));
dib8000_write_word(state, 26, (u16) ((bw->ifreq >> 25) & 0x0003));
dib8000_write_word(state, 922, bw->sad_cfg);
}
static void dib8000_reset_pll(struct dib8000_state *state)
{
const struct dibx000_bandwidth_config *pll = state->cfg.pll;
u16 clk_cfg1;
// clk_cfg0
dib8000_write_word(state, 901, (pll->pll_prediv << 8) | (pll->pll_ratio << 0));
// clk_cfg1
clk_cfg1 = (1 << 10) | (0 << 9) | (pll->IO_CLK_en_core << 8) |
(pll->bypclk_div << 5) | (pll->enable_refdiv << 4) | (1 << 3) | (pll->pll_range << 1) | (pll->pll_reset << 0);
dib8000_write_word(state, 902, clk_cfg1);
clk_cfg1 = (clk_cfg1 & 0xfff7) | (pll->pll_bypass << 3);
dib8000_write_word(state, 902, clk_cfg1);
dprintk("clk_cfg1: 0x%04x", clk_cfg1); /* 0x507 1 0 1 000 0 0 11 1 */
/* smpl_cfg: P_refclksel=2, P_ensmplsel=1 nodivsmpl=1 */
if (state->cfg.pll->ADClkSrc == 0)
dib8000_write_word(state, 904, (0 << 15) | (0 << 12) | (0 << 10) | (pll->modulo << 8) | (pll->ADClkSrc << 7) | (0 << 1));
else if (state->cfg.refclksel != 0)
dib8000_write_word(state, 904,
(0 << 15) | (1 << 12) | ((state->cfg.refclksel & 0x3) << 10) | (pll->modulo << 8) | (pll->
ADClkSrc << 7) | (0 << 1));
else
dib8000_write_word(state, 904, (0 << 15) | (1 << 12) | (3 << 10) | (pll->modulo << 8) | (pll->ADClkSrc << 7) | (0 << 1));
dib8000_reset_pll_common(state, pll);
}
static int dib8000_reset_gpio(struct dib8000_state *st)
{
/* reset the GPIOs */
dib8000_write_word(st, 1029, st->cfg.gpio_dir);
dib8000_write_word(st, 1030, st->cfg.gpio_val);
/* TODO 782 is P_gpio_od */
dib8000_write_word(st, 1032, st->cfg.gpio_pwm_pos);
dib8000_write_word(st, 1037, st->cfg.pwm_freq_div);
return 0;
}
static int dib8000_cfg_gpio(struct dib8000_state *st, u8 num, u8 dir, u8 val)
{
st->cfg.gpio_dir = dib8000_read_word(st, 1029);
st->cfg.gpio_dir &= ~(1 << num); /* reset the direction bit */
st->cfg.gpio_dir |= (dir & 0x1) << num; /* set the new direction */
dib8000_write_word(st, 1029, st->cfg.gpio_dir);
st->cfg.gpio_val = dib8000_read_word(st, 1030);
st->cfg.gpio_val &= ~(1 << num); /* reset the direction bit */
st->cfg.gpio_val |= (val & 0x01) << num; /* set the new value */
dib8000_write_word(st, 1030, st->cfg.gpio_val);
dprintk("gpio dir: %x: gpio val: %x", st->cfg.gpio_dir, st->cfg.gpio_val);
return 0;
}
int dib8000_set_gpio(struct dvb_frontend *fe, u8 num, u8 dir, u8 val)
{
struct dib8000_state *state = fe->demodulator_priv;
return dib8000_cfg_gpio(state, num, dir, val);
}
EXPORT_SYMBOL(dib8000_set_gpio);
static const u16 dib8000_defaults[] = {
/* auto search configuration - lock0 by default waiting
* for cpil_lock; lock1 cpil_lock; lock2 tmcc_sync_lock */
3, 7,
0x0004,
0x0400,
0x0814,
12, 11,
0x001b,
0x7740,
0x005b,
0x8d80,
0x01c9,
0xc380,
0x0000,
0x0080,
0x0000,
0x0090,
0x0001,
0xd4c0,
/*1, 32,
0x6680 // P_corm_thres Lock algorithms configuration */
11, 80, /* set ADC level to -16 */
(1 << 13) - 825 - 117,
(1 << 13) - 837 - 117,
(1 << 13) - 811 - 117,
(1 << 13) - 766 - 117,
(1 << 13) - 737 - 117,
(1 << 13) - 693 - 117,
(1 << 13) - 648 - 117,
(1 << 13) - 619 - 117,
(1 << 13) - 575 - 117,
(1 << 13) - 531 - 117,
(1 << 13) - 501 - 117,
4, 108,
0,
0,
0,
0,
1, 175,
0x0410,
1, 179,
8192, // P_fft_nb_to_cut
6, 181,
0x2800, // P_coff_corthres_ ( 2k 4k 8k ) 0x2800
0x2800,
0x2800,
0x2800, // P_coff_cpilthres_ ( 2k 4k 8k ) 0x2800
0x2800,
0x2800,
2, 193,
0x0666, // P_pha3_thres
0x0000, // P_cti_use_cpe, P_cti_use_prog
2, 205,
0x200f, // P_cspu_regul, P_cspu_win_cut
0x000f, // P_des_shift_work
5, 215,
0x023d, // P_adp_regul_cnt
0x00a4, // P_adp_noise_cnt
0x00a4, // P_adp_regul_ext
0x7ff0, // P_adp_noise_ext
0x3ccc, // P_adp_fil
1, 230,
0x0000, // P_2d_byp_ti_num
1, 263,
0x800, //P_equal_thres_wgn
1, 268,
(2 << 9) | 39, // P_equal_ctrl_synchro, P_equal_speedmode
1, 270,
0x0001, // P_div_lock0_wait
1, 285,
0x0020, //p_fec_
1, 299,
0x0062, // P_smo_mode, P_smo_rs_discard, P_smo_fifo_flush, P_smo_pid_parse, P_smo_error_discard
1, 338,
(1 << 12) | // P_ctrl_corm_thres4pre_freq_inh=1
(1 << 10) | // P_ctrl_pre_freq_mode_sat=1
(0 << 9) | // P_ctrl_pre_freq_inh=0
(3 << 5) | // P_ctrl_pre_freq_step=3
(1 << 0), // P_pre_freq_win_len=1
1, 903,
(0 << 4) | 2, // P_divclksel=0 P_divbitsel=2 (was clk=3,bit=1 for MPW)
0,
};
static u16 dib8000_identify(struct i2c_device *client)
{
u16 value;
//because of glitches sometimes
value = dib8000_i2c_read16(client, 896);
if ((value = dib8000_i2c_read16(client, 896)) != 0x01b3) {
dprintk("wrong Vendor ID (read=0x%x)", value);
return 0;
}
value = dib8000_i2c_read16(client, 897);
if (value != 0x8000 && value != 0x8001 && value != 0x8002) {
dprintk("wrong Device ID (%x)", value);
return 0;
}
switch (value) {
case 0x8000:
dprintk("found DiB8000A");
break;
case 0x8001:
dprintk("found DiB8000B");
break;
case 0x8002:
dprintk("found DiB8000C");
break;
}
return value;
}
static int dib8000_reset(struct dvb_frontend *fe)
{
struct dib8000_state *state = fe->demodulator_priv;
dib8000_write_word(state, 1287, 0x0003); /* sram lead in, rdy */
if ((state->revision = dib8000_identify(&state->i2c)) == 0)
return -EINVAL;
if (state->revision == 0x8000)
dprintk("error : dib8000 MA not supported");
dibx000_reset_i2c_master(&state->i2c_master);
dib8000_set_power_mode(state, DIB8000M_POWER_ALL);
/* always leave the VBG voltage on - it consumes almost nothing but takes a long time to start */
dib8000_set_adc_state(state, DIBX000_VBG_ENABLE);
/* restart all parts */
dib8000_write_word(state, 770, 0xffff);
dib8000_write_word(state, 771, 0xffff);
dib8000_write_word(state, 772, 0xfffc);
dib8000_write_word(state, 898, 0x000c); // sad
dib8000_write_word(state, 1280, 0x004d);
dib8000_write_word(state, 1281, 0x000c);
dib8000_write_word(state, 770, 0x0000);
dib8000_write_word(state, 771, 0x0000);
dib8000_write_word(state, 772, 0x0000);
dib8000_write_word(state, 898, 0x0004); // sad
dib8000_write_word(state, 1280, 0x0000);
dib8000_write_word(state, 1281, 0x0000);
/* drives */
if (state->cfg.drives)
dib8000_write_word(state, 906, state->cfg.drives);
else {
dprintk("using standard PAD-drive-settings, please adjust settings in config-struct to be optimal.");
dib8000_write_word(state, 906, 0x2d98); // min drive SDRAM - not optimal - adjust
}
dib8000_reset_pll(state);
if (dib8000_reset_gpio(state) != 0)
dprintk("GPIO reset was not successful.");
if (dib8000_set_output_mode(state, OUTMODE_HIGH_Z) != 0)
dprintk("OUTPUT_MODE could not be resetted.");
state->current_agc = NULL;
// P_iqc_alpha_pha, P_iqc_alpha_amp, P_iqc_dcc_alpha, ...
/* P_iqc_ca2 = 0; P_iqc_impnc_on = 0; P_iqc_mode = 0; */
if (state->cfg.pll->ifreq == 0)
dib8000_write_word(state, 40, 0x0755); /* P_iqc_corr_inh = 0 enable IQcorr block */
else
dib8000_write_word(state, 40, 0x1f55); /* P_iqc_corr_inh = 1 disable IQcorr block */
{
u16 l = 0, r;
const u16 *n;
n = dib8000_defaults;
l = *n++;
while (l) {
r = *n++;
do {
dib8000_write_word(state, r, *n++);
r++;
} while (--l);
l = *n++;
}
}
state->isdbt_cfg_loaded = 0;
//div_cfg override for special configs
if (state->cfg.div_cfg != 0)
dib8000_write_word(state, 903, state->cfg.div_cfg);
/* unforce divstr regardless whether i2c enumeration was done or not */
dib8000_write_word(state, 1285, dib8000_read_word(state, 1285) & ~(1 << 1));
dib8000_set_bandwidth(state, 6000);
dib8000_set_adc_state(state, DIBX000_SLOW_ADC_ON);
dib8000_sad_calib(state);
dib8000_set_adc_state(state, DIBX000_SLOW_ADC_OFF);
dib8000_set_power_mode(state, DIB8000M_POWER_INTERFACE_ONLY);
return 0;
}
static void dib8000_restart_agc(struct dib8000_state *state)
{
// P_restart_iqc & P_restart_agc
dib8000_write_word(state, 770, 0x0a00);
dib8000_write_word(state, 770, 0x0000);
}
static int dib8000_update_lna(struct dib8000_state *state)
{
u16 dyn_gain;
if (state->cfg.update_lna) {
// read dyn_gain here (because it is demod-dependent and not tuner)
dyn_gain = dib8000_read_word(state, 390);
if (state->cfg.update_lna(&state->fe, dyn_gain)) { // LNA has changed
dib8000_restart_agc(state);
return 1;
}
}
return 0;
}
static int dib8000_set_agc_config(struct dib8000_state *state, u8 band)
{
struct dibx000_agc_config *agc = NULL;
int i;
if (state->current_band == band && state->current_agc != NULL)
return 0;
state->current_band = band;
for (i = 0; i < state->cfg.agc_config_count; i++)
if (state->cfg.agc[i].band_caps & band) {
agc = &state->cfg.agc[i];
break;
}
if (agc == NULL) {
dprintk("no valid AGC configuration found for band 0x%02x", band);
return -EINVAL;
}
state->current_agc = agc;
/* AGC */
dib8000_write_word(state, 76, agc->setup);
dib8000_write_word(state, 77, agc->inv_gain);
dib8000_write_word(state, 78, agc->time_stabiliz);
dib8000_write_word(state, 101, (agc->alpha_level << 12) | agc->thlock);
// Demod AGC loop configuration
dib8000_write_word(state, 102, (agc->alpha_mant << 5) | agc->alpha_exp);
dib8000_write_word(state, 103, (agc->beta_mant << 6) | agc->beta_exp);
dprintk("WBD: ref: %d, sel: %d, active: %d, alpha: %d",
state->wbd_ref != 0 ? state->wbd_ref : agc->wbd_ref, agc->wbd_sel, !agc->perform_agc_softsplit, agc->wbd_sel);
/* AGC continued */
if (state->wbd_ref != 0)
dib8000_write_word(state, 106, state->wbd_ref);
else // use default
dib8000_write_word(state, 106, agc->wbd_ref);
dib8000_write_word(state, 107, (agc->wbd_alpha << 9) | (agc->perform_agc_softsplit << 8));
dib8000_write_word(state, 108, agc->agc1_max);
dib8000_write_word(state, 109, agc->agc1_min);
dib8000_write_word(state, 110, agc->agc2_max);
dib8000_write_word(state, 111, agc->agc2_min);
dib8000_write_word(state, 112, (agc->agc1_pt1 << 8) | agc->agc1_pt2);
dib8000_write_word(state, 113, (agc->agc1_slope1 << 8) | agc->agc1_slope2);
dib8000_write_word(state, 114, (agc->agc2_pt1 << 8) | agc->agc2_pt2);
dib8000_write_word(state, 115, (agc->agc2_slope1 << 8) | agc->agc2_slope2);
dib8000_write_word(state, 75, agc->agc1_pt3);
dib8000_write_word(state, 923, (dib8000_read_word(state, 923) & 0xffe3) | (agc->wbd_inv << 4) | (agc->wbd_sel << 2)); /*LB : 929 -> 923 */
return 0;
}
void dib8000_pwm_agc_reset(struct dvb_frontend *fe)
{
struct dib8000_state *state = fe->demodulator_priv;
dib8000_set_adc_state(state, DIBX000_ADC_ON);
dib8000_set_agc_config(state, (unsigned char)(BAND_OF_FREQUENCY(fe->dtv_property_cache.frequency / 1000)));
}
EXPORT_SYMBOL(dib8000_pwm_agc_reset);
static int dib8000_agc_soft_split(struct dib8000_state *state)
{
u16 agc, split_offset;
if (!state->current_agc || !state->current_agc->perform_agc_softsplit || state->current_agc->split.max == 0)
return FE_CALLBACK_TIME_NEVER;
// n_agc_global
agc = dib8000_read_word(state, 390);
if (agc > state->current_agc->split.min_thres)
split_offset = state->current_agc->split.min;
else if (agc < state->current_agc->split.max_thres)
split_offset = state->current_agc->split.max;
else
split_offset = state->current_agc->split.max *
(agc - state->current_agc->split.min_thres) / (state->current_agc->split.max_thres - state->current_agc->split.min_thres);
dprintk("AGC split_offset: %d", split_offset);
// P_agc_force_split and P_agc_split_offset
dib8000_write_word(state, 107, (dib8000_read_word(state, 107) & 0xff00) | split_offset);
return 5000;
}
static int dib8000_agc_startup(struct dvb_frontend *fe)
{
struct dib8000_state *state = fe->demodulator_priv;
enum frontend_tune_state *tune_state = &state->tune_state;
int ret = 0;
switch (*tune_state) {
case CT_AGC_START:
// set power-up level: interf+analog+AGC
dib8000_set_adc_state(state, DIBX000_ADC_ON);
if (dib8000_set_agc_config(state, (unsigned char)(BAND_OF_FREQUENCY(fe->dtv_property_cache.frequency / 1000))) != 0) {
*tune_state = CT_AGC_STOP;
state->status = FE_STATUS_TUNE_FAILED;
break;
}
ret = 70;
*tune_state = CT_AGC_STEP_0;
break;
case CT_AGC_STEP_0:
//AGC initialization
if (state->cfg.agc_control)
state->cfg.agc_control(&state->fe, 1);
dib8000_restart_agc(state);
// wait AGC rough lock time
ret = 50;
*tune_state = CT_AGC_STEP_1;
break;
case CT_AGC_STEP_1:
// wait AGC accurate lock time
ret = 70;
if (dib8000_update_lna(state))
// wait only AGC rough lock time
ret = 50;
else
*tune_state = CT_AGC_STEP_2;
break;
case CT_AGC_STEP_2:
dib8000_agc_soft_split(state);
if (state->cfg.agc_control)
state->cfg.agc_control(&state->fe, 0);
*tune_state = CT_AGC_STOP;
break;
default:
ret = dib8000_agc_soft_split(state);
break;
}
return ret;
}
static const int32_t lut_1000ln_mant[] =
{
908, 7003, 7090, 7170, 7244, 7313, 7377, 7438, 7495, 7549, 7600
};
int32_t dib8000_get_adc_power(struct dvb_frontend *fe, uint8_t mode)
{
struct dib8000_state *state = fe->demodulator_priv;
uint32_t ix = 0, tmp_val = 0, exp = 0, mant = 0;
int32_t val;
val = dib8000_read32(state, 384);
/* mode = 1 : ln_agcpower calc using mant-exp conversion and mantis look up table */
if (mode) {
tmp_val = val;
while (tmp_val >>= 1)
exp++;
mant = (val * 1000 / (1<<exp));
ix = (uint8_t)((mant-1000)/100); /* index of the LUT */
val = (lut_1000ln_mant[ix] + 693*(exp-20) - 6908); /* 1000 * ln(adcpower_real) ; 693 = 1000ln(2) ; 6908 = 1000*ln(1000) ; 20 comes from adc_real = adc_pow_int / 2**20 */
val = (val*256)/1000;
}
return val;
}
EXPORT_SYMBOL(dib8000_get_adc_power);
static void dib8000_update_timf(struct dib8000_state *state)
{
u32 timf = state->timf = dib8000_read32(state, 435);
dib8000_write_word(state, 29, (u16) (timf >> 16));
dib8000_write_word(state, 30, (u16) (timf & 0xffff));
dprintk("Updated timing frequency: %d (default: %d)", state->timf, state->timf_default);
}
static void dib8000_set_channel(struct dib8000_state *state, u8 seq, u8 autosearching)
{
u16 mode, max_constellation, seg_diff_mask = 0, nbseg_diff = 0;
u8 guard, crate, constellation, timeI;
u8 permu_seg[] = { 6, 5, 7, 4, 8, 3, 9, 2, 10, 1, 11, 0, 12 };
u16 i, coeff[4], P_cfr_left_edge = 0, P_cfr_right_edge = 0, seg_mask13 = 0x1fff; // All 13 segments enabled
const s16 *ncoeff = NULL, *ana_fe;
u16 tmcc_pow = 0;
u16 coff_pow = 0x2800;
u16 init_prbs = 0xfff;
u16 ana_gain = 0;
u16 adc_target_16dB[11] = {
(1 << 13) - 825 - 117,
(1 << 13) - 837 - 117,
(1 << 13) - 811 - 117,
(1 << 13) - 766 - 117,
(1 << 13) - 737 - 117,
(1 << 13) - 693 - 117,
(1 << 13) - 648 - 117,
(1 << 13) - 619 - 117,
(1 << 13) - 575 - 117,
(1 << 13) - 531 - 117,
(1 << 13) - 501 - 117
};
if (state->ber_monitored_layer != LAYER_ALL)
dib8000_write_word(state, 285, (dib8000_read_word(state, 285) & 0x60) | state->ber_monitored_layer);
else
dib8000_write_word(state, 285, dib8000_read_word(state, 285) & 0x60);
i = dib8000_read_word(state, 26) & 1; // P_dds_invspec
dib8000_write_word(state, 26, state->fe.dtv_property_cache.inversion ^ i);
if (state->fe.dtv_property_cache.isdbt_sb_mode) {
//compute new dds_freq for the seg and adjust prbs
int seg_offset =
state->fe.dtv_property_cache.isdbt_sb_segment_idx - (state->fe.dtv_property_cache.isdbt_sb_segment_count / 2) -
(state->fe.dtv_property_cache.isdbt_sb_segment_count % 2);
int clk = state->cfg.pll->internal;
u32 segtodds = ((u32) (430 << 23) / clk) << 3; // segtodds = SegBW / Fclk * pow(2,26)
int dds_offset = seg_offset * segtodds;
int new_dds, sub_channel;
if ((state->fe.dtv_property_cache.isdbt_sb_segment_count % 2) == 0) // if even
dds_offset -= (int)(segtodds / 2);
if (state->cfg.pll->ifreq == 0) {
if ((state->fe.dtv_property_cache.inversion ^ i) == 0) {
dib8000_write_word(state, 26, dib8000_read_word(state, 26) | 1);
new_dds = dds_offset;
} else
new_dds = dds_offset;
// We shift tuning frequency if the wanted segment is :
// - the segment of center frequency with an odd total number of segments
// - the segment to the left of center frequency with an even total number of segments
// - the segment to the right of center frequency with an even total number of segments
if ((state->fe.dtv_property_cache.delivery_system == SYS_ISDBT) && (state->fe.dtv_property_cache.isdbt_sb_mode == 1)
&&
(((state->fe.dtv_property_cache.isdbt_sb_segment_count % 2)
&& (state->fe.dtv_property_cache.isdbt_sb_segment_idx ==
((state->fe.dtv_property_cache.isdbt_sb_segment_count / 2) + 1)))
|| (((state->fe.dtv_property_cache.isdbt_sb_segment_count % 2) == 0)
&& (state->fe.dtv_property_cache.isdbt_sb_segment_idx == (state->fe.dtv_property_cache.isdbt_sb_segment_count / 2)))
|| (((state->fe.dtv_property_cache.isdbt_sb_segment_count % 2) == 0)
&& (state->fe.dtv_property_cache.isdbt_sb_segment_idx ==
((state->fe.dtv_property_cache.isdbt_sb_segment_count / 2) + 1)))
)) {
new_dds -= ((u32) (850 << 22) / clk) << 4; // new_dds = 850 (freq shift in KHz) / Fclk * pow(2,26)
}
} else {
if ((state->fe.dtv_property_cache.inversion ^ i) == 0)
new_dds = state->cfg.pll->ifreq - dds_offset;
else
new_dds = state->cfg.pll->ifreq + dds_offset;
}
dib8000_write_word(state, 27, (u16) ((new_dds >> 16) & 0x01ff));
dib8000_write_word(state, 28, (u16) (new_dds & 0xffff));
if (state->fe.dtv_property_cache.isdbt_sb_segment_count % 2) // if odd
sub_channel = ((state->fe.dtv_property_cache.isdbt_sb_subchannel + (3 * seg_offset) + 1) % 41) / 3;
else // if even
sub_channel = ((state->fe.dtv_property_cache.isdbt_sb_subchannel + (3 * seg_offset)) % 41) / 3;
sub_channel -= 6;
if (state->fe.dtv_property_cache.transmission_mode == TRANSMISSION_MODE_2K
|| state->fe.dtv_property_cache.transmission_mode == TRANSMISSION_MODE_4K) {
dib8000_write_word(state, 219, dib8000_read_word(state, 219) | 0x1); //adp_pass =1
dib8000_write_word(state, 190, dib8000_read_word(state, 190) | (0x1 << 14)); //pha3_force_pha_shift = 1
} else {
dib8000_write_word(state, 219, dib8000_read_word(state, 219) & 0xfffe); //adp_pass =0
dib8000_write_word(state, 190, dib8000_read_word(state, 190) & 0xbfff); //pha3_force_pha_shift = 0
}
switch (state->fe.dtv_property_cache.transmission_mode) {
case TRANSMISSION_MODE_2K:
switch (sub_channel) {
case -6:
init_prbs = 0x0;
break; // 41, 0, 1
case -5:
init_prbs = 0x423;
break; // 02~04
case -4:
init_prbs = 0x9;
break; // 05~07
case -3:
init_prbs = 0x5C7;
break; // 08~10
case -2:
init_prbs = 0x7A6;
break; // 11~13
case -1:
init_prbs = 0x3D8;
break; // 14~16
case 0:
init_prbs = 0x527;
break; // 17~19
case 1:
init_prbs = 0x7FF;
break; // 20~22
case 2:
init_prbs = 0x79B;
break; // 23~25
case 3:
init_prbs = 0x3D6;
break; // 26~28
case 4:
init_prbs = 0x3A2;
break; // 29~31
case 5:
init_prbs = 0x53B;
break; // 32~34
case 6:
init_prbs = 0x2F4;
break; // 35~37
default:
case 7:
init_prbs = 0x213;
break; // 38~40
}
break;
case TRANSMISSION_MODE_4K:
switch (sub_channel) {
case -6:
init_prbs = 0x0;
break; // 41, 0, 1
case -5:
init_prbs = 0x208;
break; // 02~04
case -4:
init_prbs = 0xC3;
break; // 05~07
case -3:
init_prbs = 0x7B9;
break; // 08~10
case -2:
init_prbs = 0x423;
break; // 11~13
case -1:
init_prbs = 0x5C7;
break; // 14~16
case 0:
init_prbs = 0x3D8;
break; // 17~19
case 1:
init_prbs = 0x7FF;
break; // 20~22
case 2:
init_prbs = 0x3D6;
break; // 23~25
case 3:
init_prbs = 0x53B;
break; // 26~28
case 4:
init_prbs = 0x213;
break; // 29~31
case 5:
init_prbs = 0x29;
break; // 32~34
case 6:
init_prbs = 0xD0;
break; // 35~37
default:
case 7:
init_prbs = 0x48E;
break; // 38~40
}
break;
default:
case TRANSMISSION_MODE_8K:
switch (sub_channel) {
case -6:
init_prbs = 0x0;
break; // 41, 0, 1
case -5:
init_prbs = 0x740;
break; // 02~04
case -4:
init_prbs = 0x069;
break; // 05~07
case -3:
init_prbs = 0x7DD;
break; // 08~10
case -2:
init_prbs = 0x208;
break; // 11~13
case -1:
init_prbs = 0x7B9;
break; // 14~16
case 0:
init_prbs = 0x5C7;
break; // 17~19
case 1:
init_prbs = 0x7FF;
break; // 20~22
case 2:
init_prbs = 0x53B;
break; // 23~25
case 3:
init_prbs = 0x29;
break; // 26~28
case 4:
init_prbs = 0x48E;
break; // 29~31
case 5:
init_prbs = 0x4C4;
break; // 32~34
case 6:
init_prbs = 0x367;
break; // 33~37
default:
case 7:
init_prbs = 0x684;
break; // 38~40
}
break;
}
} else { // if not state->fe.dtv_property_cache.isdbt_sb_mode
dib8000_write_word(state, 27, (u16) ((state->cfg.pll->ifreq >> 16) & 0x01ff));
dib8000_write_word(state, 28, (u16) (state->cfg.pll->ifreq & 0xffff));
dib8000_write_word(state, 26, (u16) ((state->cfg.pll->ifreq >> 25) & 0x0003));
}
/*P_mode == ?? */
dib8000_write_word(state, 10, (seq << 4));
// dib8000_write_word(state, 287, (dib8000_read_word(state, 287) & 0xe000) | 0x1000);
switch (state->fe.dtv_property_cache.guard_interval) {
case GUARD_INTERVAL_1_32:
guard = 0;
break;
case GUARD_INTERVAL_1_16:
guard = 1;
break;
case GUARD_INTERVAL_1_8:
guard = 2;
break;
case GUARD_INTERVAL_1_4:
default:
guard = 3;
break;
}
dib8000_write_word(state, 1, (init_prbs << 2) | (guard & 0x3)); // ADDR 1
max_constellation = DQPSK;
for (i = 0; i < 3; i++) {
switch (state->fe.dtv_property_cache.layer[i].modulation) {
case DQPSK:
constellation = 0;
break;
case QPSK:
constellation = 1;
break;
case QAM_16:
constellation = 2;
break;
case QAM_64:
default:
constellation = 3;
break;
}
switch (state->fe.dtv_property_cache.layer[i].fec) {
case FEC_1_2:
crate = 1;
break;
case FEC_2_3:
crate = 2;
break;
case FEC_3_4:
crate = 3;
break;
case FEC_5_6:
crate = 5;
break;
case FEC_7_8:
default:
crate = 7;
break;
}
if ((state->fe.dtv_property_cache.layer[i].interleaving > 0) &&
((state->fe.dtv_property_cache.layer[i].interleaving <= 3) ||
(state->fe.dtv_property_cache.layer[i].interleaving == 4 && state->fe.dtv_property_cache.isdbt_sb_mode == 1))
)
timeI = state->fe.dtv_property_cache.layer[i].interleaving;
else
timeI = 0;
dib8000_write_word(state, 2 + i, (constellation << 10) | ((state->fe.dtv_property_cache.layer[i].segment_count & 0xf) << 6) |
(crate << 3) | timeI);
if (state->fe.dtv_property_cache.layer[i].segment_count > 0) {
switch (max_constellation) {
case DQPSK:
case QPSK:
if (state->fe.dtv_property_cache.layer[i].modulation == QAM_16 ||
state->fe.dtv_property_cache.layer[i].modulation == QAM_64)
max_constellation = state->fe.dtv_property_cache.layer[i].modulation;
break;
case QAM_16:
if (state->fe.dtv_property_cache.layer[i].modulation == QAM_64)
max_constellation = state->fe.dtv_property_cache.layer[i].modulation;
break;
}
}
}
mode = fft_to_mode(state);
//dib8000_write_word(state, 5, 13); /*p_last_seg = 13*/
dib8000_write_word(state, 274, (dib8000_read_word(state, 274) & 0xffcf) |
((state->fe.dtv_property_cache.isdbt_partial_reception & 1) << 5) | ((state->fe.dtv_property_cache.
isdbt_sb_mode & 1) << 4));
dprintk("mode = %d ; guard = %d", mode, state->fe.dtv_property_cache.guard_interval);
/* signal optimization parameter */
if (state->fe.dtv_property_cache.isdbt_partial_reception) {
seg_diff_mask = (state->fe.dtv_property_cache.layer[0].modulation == DQPSK) << permu_seg[0];
for (i = 1; i < 3; i++)
nbseg_diff +=
(state->fe.dtv_property_cache.layer[i].modulation == DQPSK) * state->fe.dtv_property_cache.layer[i].segment_count;
for (i = 0; i < nbseg_diff; i++)
seg_diff_mask |= 1 << permu_seg[i + 1];
} else {
for (i = 0; i < 3; i++)
nbseg_diff +=
(state->fe.dtv_property_cache.layer[i].modulation == DQPSK) * state->fe.dtv_property_cache.layer[i].segment_count;
for (i = 0; i < nbseg_diff; i++)
seg_diff_mask |= 1 << permu_seg[i];
}
dprintk("nbseg_diff = %X (%d)", seg_diff_mask, seg_diff_mask);
state->differential_constellation = (seg_diff_mask != 0);
dib8000_set_diversity_in(&state->fe, state->diversity_onoff);
if (state->fe.dtv_property_cache.isdbt_sb_mode == 1) { // ISDB-Tsb
if (state->fe.dtv_property_cache.isdbt_partial_reception == 1) // 3-segments
seg_mask13 = 0x00E0;
else // 1-segment
seg_mask13 = 0x0040;
} else
seg_mask13 = 0x1fff;
// WRITE: Mode & Diff mask
dib8000_write_word(state, 0, (mode << 13) | seg_diff_mask);
if ((seg_diff_mask) || (state->fe.dtv_property_cache.isdbt_sb_mode))
dib8000_write_word(state, 268, (dib8000_read_word(state, 268) & 0xF9FF) | 0x0200);
else
dib8000_write_word(state, 268, (2 << 9) | 39); //init value
// ---- SMALL ----
// P_small_seg_diff
dib8000_write_word(state, 352, seg_diff_mask); // ADDR 352
dib8000_write_word(state, 353, seg_mask13); // ADDR 353
/* // P_small_narrow_band=0, P_small_last_seg=13, P_small_offset_num_car=5 */
// dib8000_write_word(state, 351, (state->fe.dtv_property_cache.isdbt_sb_mode << 8) | (13 << 4) | 5 );
// ---- SMALL ----
if (state->fe.dtv_property_cache.isdbt_sb_mode == 1) {
switch (state->fe.dtv_property_cache.transmission_mode) {
case TRANSMISSION_MODE_2K:
if (state->fe.dtv_property_cache.isdbt_partial_reception == 0) { // 1-seg
if (state->fe.dtv_property_cache.layer[0].modulation == DQPSK) // DQPSK
ncoeff = coeff_2k_sb_1seg_dqpsk;
else // QPSK or QAM
ncoeff = coeff_2k_sb_1seg;
} else { // 3-segments
if (state->fe.dtv_property_cache.layer[0].modulation == DQPSK) { // DQPSK on central segment
if (state->fe.dtv_property_cache.layer[1].modulation == DQPSK) // DQPSK on external segments
ncoeff = coeff_2k_sb_3seg_0dqpsk_1dqpsk;
else // QPSK or QAM on external segments
ncoeff = coeff_2k_sb_3seg_0dqpsk;
} else { // QPSK or QAM on central segment
if (state->fe.dtv_property_cache.layer[1].modulation == DQPSK) // DQPSK on external segments
ncoeff = coeff_2k_sb_3seg_1dqpsk;
else // QPSK or QAM on external segments
ncoeff = coeff_2k_sb_3seg;
}
}
break;
case TRANSMISSION_MODE_4K:
if (state->fe.dtv_property_cache.isdbt_partial_reception == 0) { // 1-seg
if (state->fe.dtv_property_cache.layer[0].modulation == DQPSK) // DQPSK
ncoeff = coeff_4k_sb_1seg_dqpsk;
else // QPSK or QAM
ncoeff = coeff_4k_sb_1seg;
} else { // 3-segments
if (state->fe.dtv_property_cache.layer[0].modulation == DQPSK) { // DQPSK on central segment
if (state->fe.dtv_property_cache.layer[1].modulation == DQPSK) { // DQPSK on external segments
ncoeff = coeff_4k_sb_3seg_0dqpsk_1dqpsk;
} else { // QPSK or QAM on external segments
ncoeff = coeff_4k_sb_3seg_0dqpsk;
}
} else { // QPSK or QAM on central segment
if (state->fe.dtv_property_cache.layer[1].modulation == DQPSK) { // DQPSK on external segments
ncoeff = coeff_4k_sb_3seg_1dqpsk;
} else // QPSK or QAM on external segments
ncoeff = coeff_4k_sb_3seg;
}
}
break;
case TRANSMISSION_MODE_AUTO:
case TRANSMISSION_MODE_8K:
default:
if (state->fe.dtv_property_cache.isdbt_partial_reception == 0) { // 1-seg
if (state->fe.dtv_property_cache.layer[0].modulation == DQPSK) // DQPSK
ncoeff = coeff_8k_sb_1seg_dqpsk;
else // QPSK or QAM
ncoeff = coeff_8k_sb_1seg;
} else { // 3-segments
if (state->fe.dtv_property_cache.layer[0].modulation == DQPSK) { // DQPSK on central segment
if (state->fe.dtv_property_cache.layer[1].modulation == DQPSK) { // DQPSK on external segments
ncoeff = coeff_8k_sb_3seg_0dqpsk_1dqpsk;
} else { // QPSK or QAM on external segments
ncoeff = coeff_8k_sb_3seg_0dqpsk;
}
} else { // QPSK or QAM on central segment
if (state->fe.dtv_property_cache.layer[1].modulation == DQPSK) { // DQPSK on external segments
ncoeff = coeff_8k_sb_3seg_1dqpsk;
} else // QPSK or QAM on external segments
ncoeff = coeff_8k_sb_3seg;
}
}
break;
}
for (i = 0; i < 8; i++)
dib8000_write_word(state, 343 + i, ncoeff[i]);
}
// P_small_coef_ext_enable=ISDB-Tsb, P_small_narrow_band=ISDB-Tsb, P_small_last_seg=13, P_small_offset_num_car=5
dib8000_write_word(state, 351,
(state->fe.dtv_property_cache.isdbt_sb_mode << 9) | (state->fe.dtv_property_cache.isdbt_sb_mode << 8) | (13 << 4) | 5);
// ---- COFF ----
// Carloff, the most robust
if (state->fe.dtv_property_cache.isdbt_sb_mode == 1) { // Sound Broadcasting mode - use both TMCC and AC pilots
// P_coff_cpil_alpha=4, P_coff_inh=0, P_coff_cpil_winlen=64
// P_coff_narrow_band=1, P_coff_square_val=1, P_coff_one_seg=~partial_rcpt, P_coff_use_tmcc=1, P_coff_use_ac=1
dib8000_write_word(state, 187,
(4 << 12) | (0 << 11) | (63 << 5) | (0x3 << 3) | ((~state->fe.dtv_property_cache.isdbt_partial_reception & 1) << 2)
| 0x3);
/* // P_small_coef_ext_enable = 1 */
/* dib8000_write_word(state, 351, dib8000_read_word(state, 351) | 0x200); */
if (state->fe.dtv_property_cache.isdbt_partial_reception == 0) { // Sound Broadcasting mode 1 seg
// P_coff_winlen=63, P_coff_thres_lock=15, P_coff_one_seg_width= (P_mode == 3) , P_coff_one_seg_sym= (P_mode-1)
if (mode == 3)
dib8000_write_word(state, 180, 0x1fcf | ((mode - 1) << 14));
else
dib8000_write_word(state, 180, 0x0fcf | ((mode - 1) << 14));
// P_ctrl_corm_thres4pre_freq_inh=1,P_ctrl_pre_freq_mode_sat=1,
// P_ctrl_pre_freq_inh=0, P_ctrl_pre_freq_step = 5, P_pre_freq_win_len=4
dib8000_write_word(state, 338, (1 << 12) | (1 << 10) | (0 << 9) | (5 << 5) | 4);
// P_ctrl_pre_freq_win_len=16, P_ctrl_pre_freq_thres_lockin=8
dib8000_write_word(state, 340, (16 << 6) | (8 << 0));
// P_ctrl_pre_freq_thres_lockout=6, P_small_use_tmcc/ac/cp=1
dib8000_write_word(state, 341, (6 << 3) | (1 << 2) | (1 << 1) | (1 << 0));
// P_coff_corthres_8k, 4k, 2k and P_coff_cpilthres_8k, 4k, 2k
dib8000_write_word(state, 181, 300);
dib8000_write_word(state, 182, 150);
dib8000_write_word(state, 183, 80);
dib8000_write_word(state, 184, 300);
dib8000_write_word(state, 185, 150);
dib8000_write_word(state, 186, 80);
} else { // Sound Broadcasting mode 3 seg
// P_coff_one_seg_sym= 1, P_coff_one_seg_width= 1, P_coff_winlen=63, P_coff_thres_lock=15
/* if (mode == 3) */
/* dib8000_write_word(state, 180, 0x2fca | ((0) << 14)); */
/* else */
/* dib8000_write_word(state, 180, 0x2fca | ((1) << 14)); */
dib8000_write_word(state, 180, 0x1fcf | (1 << 14));
// P_ctrl_corm_thres4pre_freq_inh = 1, P_ctrl_pre_freq_mode_sat=1,
// P_ctrl_pre_freq_inh=0, P_ctrl_pre_freq_step = 4, P_pre_freq_win_len=4
dib8000_write_word(state, 338, (1 << 12) | (1 << 10) | (0 << 9) | (4 << 5) | 4);
// P_ctrl_pre_freq_win_len=16, P_ctrl_pre_freq_thres_lockin=8
dib8000_write_word(state, 340, (16 << 6) | (8 << 0));
//P_ctrl_pre_freq_thres_lockout=6, P_small_use_tmcc/ac/cp=1
dib8000_write_word(state, 341, (6 << 3) | (1 << 2) | (1 << 1) | (1 << 0));
// P_coff_corthres_8k, 4k, 2k and P_coff_cpilthres_8k, 4k, 2k
dib8000_write_word(state, 181, 350);
dib8000_write_word(state, 182, 300);
dib8000_write_word(state, 183, 250);
dib8000_write_word(state, 184, 350);
dib8000_write_word(state, 185, 300);
dib8000_write_word(state, 186, 250);
}
} else if (state->isdbt_cfg_loaded == 0) { // if not Sound Broadcasting mode : put default values for 13 segments
dib8000_write_word(state, 180, (16 << 6) | 9);
dib8000_write_word(state, 187, (4 << 12) | (8 << 5) | 0x2);
coff_pow = 0x2800;
for (i = 0; i < 6; i++)
dib8000_write_word(state, 181 + i, coff_pow);
// P_ctrl_corm_thres4pre_freq_inh=1, P_ctrl_pre_freq_mode_sat=1,
// P_ctrl_pre_freq_mode_sat=1, P_ctrl_pre_freq_inh=0, P_ctrl_pre_freq_step = 3, P_pre_freq_win_len=1
dib8000_write_word(state, 338, (1 << 12) | (1 << 10) | (0 << 9) | (3 << 5) | 1);
// P_ctrl_pre_freq_win_len=8, P_ctrl_pre_freq_thres_lockin=6
dib8000_write_word(state, 340, (8 << 6) | (6 << 0));
// P_ctrl_pre_freq_thres_lockout=4, P_small_use_tmcc/ac/cp=1
dib8000_write_word(state, 341, (4 << 3) | (1 << 2) | (1 << 1) | (1 << 0));
}
// ---- FFT ----
if (state->fe.dtv_property_cache.isdbt_sb_mode == 1 && state->fe.dtv_property_cache.isdbt_partial_reception == 0) // 1-seg
dib8000_write_word(state, 178, 64); // P_fft_powrange=64
else
dib8000_write_word(state, 178, 32); // P_fft_powrange=32
/* make the cpil_coff_lock more robust but slower p_coff_winlen
* 6bits; p_coff_thres_lock 6bits (for coff lock if needed)
*/
/* if ( ( nbseg_diff>0)&&(nbseg_diff<13))
dib8000_write_word(state, 187, (dib8000_read_word(state, 187) & 0xfffb) | (1 << 3)); */
dib8000_write_word(state, 189, ~seg_mask13 | seg_diff_mask); /* P_lmod4_seg_inh */
dib8000_write_word(state, 192, ~seg_mask13 | seg_diff_mask); /* P_pha3_seg_inh */
dib8000_write_word(state, 225, ~seg_mask13 | seg_diff_mask); /* P_tac_seg_inh */
if ((!state->fe.dtv_property_cache.isdbt_sb_mode) && (state->cfg.pll->ifreq == 0))
dib8000_write_word(state, 266, ~seg_mask13 | seg_diff_mask | 0x40); /* P_equal_noise_seg_inh */
else
dib8000_write_word(state, 266, ~seg_mask13 | seg_diff_mask); /* P_equal_noise_seg_inh */
dib8000_write_word(state, 287, ~seg_mask13 | 0x1000); /* P_tmcc_seg_inh */
//dib8000_write_word(state, 288, ~seg_mask13 | seg_diff_mask); /* P_tmcc_seg_eq_inh */
if (!autosearching)
dib8000_write_word(state, 288, (~seg_mask13 | seg_diff_mask) & 0x1fff); /* P_tmcc_seg_eq_inh */
else
dib8000_write_word(state, 288, 0x1fff); //disable equalisation of the tmcc when autosearch to be able to find the DQPSK channels.
dprintk("287 = %X (%d)", ~seg_mask13 | 0x1000, ~seg_mask13 | 0x1000);
dib8000_write_word(state, 211, seg_mask13 & (~seg_diff_mask)); /* P_des_seg_enabled */
/* offset loop parameters */
if (state->fe.dtv_property_cache.isdbt_sb_mode == 1) {
if (state->fe.dtv_property_cache.isdbt_partial_reception == 0) // Sound Broadcasting mode 1 seg
/* P_timf_alpha = (11-P_mode), P_corm_alpha=6, P_corm_thres=0x80 */
dib8000_write_word(state, 32, ((11 - mode) << 12) | (6 << 8) | 0x40);
else // Sound Broadcasting mode 3 seg
/* P_timf_alpha = (10-P_mode), P_corm_alpha=6, P_corm_thres=0x80 */
dib8000_write_word(state, 32, ((10 - mode) << 12) | (6 << 8) | 0x60);
} else
// TODO in 13 seg, timf_alpha can always be the same or not ?
/* P_timf_alpha = (9-P_mode, P_corm_alpha=6, P_corm_thres=0x80 */
dib8000_write_word(state, 32, ((9 - mode) << 12) | (6 << 8) | 0x80);
if (state->fe.dtv_property_cache.isdbt_sb_mode == 1) {
if (state->fe.dtv_property_cache.isdbt_partial_reception == 0) // Sound Broadcasting mode 1 seg
/* P_ctrl_pha_off_max=3 P_ctrl_sfreq_inh =0 P_ctrl_sfreq_step = (11-P_mode) */
dib8000_write_word(state, 37, (3 << 5) | (0 << 4) | (10 - mode));
else // Sound Broadcasting mode 3 seg
/* P_ctrl_pha_off_max=3 P_ctrl_sfreq_inh =0 P_ctrl_sfreq_step = (10-P_mode) */
dib8000_write_word(state, 37, (3 << 5) | (0 << 4) | (9 - mode));
} else
/* P_ctrl_pha_off_max=3 P_ctrl_sfreq_inh =0 P_ctrl_sfreq_step = 9 */
dib8000_write_word(state, 37, (3 << 5) | (0 << 4) | (8 - mode));
/* P_dvsy_sync_wait - reuse mode */
switch (state->fe.dtv_property_cache.transmission_mode) {
case TRANSMISSION_MODE_8K:
mode = 256;
break;
case TRANSMISSION_MODE_4K:
mode = 128;
break;
default:
case TRANSMISSION_MODE_2K:
mode = 64;
break;
}
if (state->cfg.diversity_delay == 0)
mode = (mode * (1 << (guard)) * 3) / 2 + 48; // add 50% SFN margin + compensate for one DVSY-fifo
else
mode = (mode * (1 << (guard)) * 3) / 2 + state->cfg.diversity_delay; // add 50% SFN margin + compensate for DVSY-fifo
mode <<= 4;
dib8000_write_word(state, 273, (dib8000_read_word(state, 273) & 0x000f) | mode);
/* channel estimation fine configuration */
switch (max_constellation) {
case QAM_64:
ana_gain = 0x7; // -1 : avoid def_est saturation when ADC target is -16dB
coeff[0] = 0x0148; /* P_adp_regul_cnt 0.04 */
coeff[1] = 0xfff0; /* P_adp_noise_cnt -0.002 */
coeff[2] = 0x00a4; /* P_adp_regul_ext 0.02 */
coeff[3] = 0xfff8; /* P_adp_noise_ext -0.001 */
//if (!state->cfg.hostbus_diversity) //if diversity, we should prehaps use the configuration of the max_constallation -1
break;
case QAM_16:
ana_gain = 0x7; // -1 : avoid def_est saturation when ADC target is -16dB
coeff[0] = 0x023d; /* P_adp_regul_cnt 0.07 */
coeff[1] = 0xffdf; /* P_adp_noise_cnt -0.004 */
coeff[2] = 0x00a4; /* P_adp_regul_ext 0.02 */
coeff[3] = 0xfff0; /* P_adp_noise_ext -0.002 */
//if (!((state->cfg.hostbus_diversity) && (max_constellation == QAM_16)))
break;
default:
ana_gain = 0; // 0 : goes along with ADC target at -22dB to keep good mobile performance and lock at sensitivity level
coeff[0] = 0x099a; /* P_adp_regul_cnt 0.3 */
coeff[1] = 0xffae; /* P_adp_noise_cnt -0.01 */
coeff[2] = 0x0333; /* P_adp_regul_ext 0.1 */
coeff[3] = 0xfff8; /* P_adp_noise_ext -0.002 */
break;
}
for (mode = 0; mode < 4; mode++)
dib8000_write_word(state, 215 + mode, coeff[mode]);
// update ana_gain depending on max constellation
dib8000_write_word(state, 116, ana_gain);
// update ADC target depending on ana_gain
if (ana_gain) { // set -16dB ADC target for ana_gain=-1
for (i = 0; i < 10; i++)
dib8000_write_word(state, 80 + i, adc_target_16dB[i]);
} else { // set -22dB ADC target for ana_gain=0
for (i = 0; i < 10; i++)
dib8000_write_word(state, 80 + i, adc_target_16dB[i] - 355);
}
// ---- ANA_FE ----
if (state->fe.dtv_property_cache.isdbt_sb_mode) {
if (state->fe.dtv_property_cache.isdbt_partial_reception == 1) // 3-segments
ana_fe = ana_fe_coeff_3seg;
else // 1-segment
ana_fe = ana_fe_coeff_1seg;
} else
ana_fe = ana_fe_coeff_13seg;
if (state->fe.dtv_property_cache.isdbt_sb_mode == 1 || state->isdbt_cfg_loaded == 0)
for (mode = 0; mode < 24; mode++)
dib8000_write_word(state, 117 + mode, ana_fe[mode]);
// ---- CHAN_BLK ----
for (i = 0; i < 13; i++) {
if ((((~seg_diff_mask) >> i) & 1) == 1) {
P_cfr_left_edge += (1 << i) * ((i == 0) || ((((seg_mask13 & (~seg_diff_mask)) >> (i - 1)) & 1) == 0));
P_cfr_right_edge += (1 << i) * ((i == 12) || ((((seg_mask13 & (~seg_diff_mask)) >> (i + 1)) & 1) == 0));
}
}
dib8000_write_word(state, 222, P_cfr_left_edge); // P_cfr_left_edge
dib8000_write_word(state, 223, P_cfr_right_edge); // P_cfr_right_edge
// "P_cspu_left_edge" not used => do not care
// "P_cspu_right_edge" not used => do not care
if (state->fe.dtv_property_cache.isdbt_sb_mode == 1) { // ISDB-Tsb
dib8000_write_word(state, 228, 1); // P_2d_mode_byp=1
dib8000_write_word(state, 205, dib8000_read_word(state, 205) & 0xfff0); // P_cspu_win_cut = 0
if (state->fe.dtv_property_cache.isdbt_partial_reception == 0 // 1-segment
&& state->fe.dtv_property_cache.transmission_mode == TRANSMISSION_MODE_2K) {
//dib8000_write_word(state, 219, dib8000_read_word(state, 219) & 0xfffe); // P_adp_pass = 0
dib8000_write_word(state, 265, 15); // P_equal_noise_sel = 15
}
} else if (state->isdbt_cfg_loaded == 0) {
dib8000_write_word(state, 228, 0); // default value
dib8000_write_word(state, 265, 31); // default value
dib8000_write_word(state, 205, 0x200f); // init value
}
// ---- TMCC ----
for (i = 0; i < 3; i++)
tmcc_pow +=
(((state->fe.dtv_property_cache.layer[i].modulation == DQPSK) * 4 + 1) * state->fe.dtv_property_cache.layer[i].segment_count);
// Quantif of "P_tmcc_dec_thres_?k" is (0, 5+mode, 9);
// Threshold is set at 1/4 of max power.
tmcc_pow *= (1 << (9 - 2));
dib8000_write_word(state, 290, tmcc_pow); // P_tmcc_dec_thres_2k
dib8000_write_word(state, 291, tmcc_pow); // P_tmcc_dec_thres_4k
dib8000_write_word(state, 292, tmcc_pow); // P_tmcc_dec_thres_8k
//dib8000_write_word(state, 287, (1 << 13) | 0x1000 );
// ---- PHA3 ----
if (state->isdbt_cfg_loaded == 0)
dib8000_write_word(state, 250, 3285); /*p_2d_hspeed_thr0 */
if (state->fe.dtv_property_cache.isdbt_sb_mode == 1)
state->isdbt_cfg_loaded = 0;
else
state->isdbt_cfg_loaded = 1;
}
static int dib8000_autosearch_start(struct dvb_frontend *fe)
{
u8 factor;
u32 value;
struct dib8000_state *state = fe->demodulator_priv;
int slist = 0;
state->fe.dtv_property_cache.inversion = 0;
if (!state->fe.dtv_property_cache.isdbt_sb_mode)
state->fe.dtv_property_cache.layer[0].segment_count = 13;
state->fe.dtv_property_cache.layer[0].modulation = QAM_64;
state->fe.dtv_property_cache.layer[0].fec = FEC_2_3;
state->fe.dtv_property_cache.layer[0].interleaving = 0;
//choose the right list, in sb, always do everything
if (state->fe.dtv_property_cache.isdbt_sb_mode) {
state->fe.dtv_property_cache.transmission_mode = TRANSMISSION_MODE_8K;
state->fe.dtv_property_cache.guard_interval = GUARD_INTERVAL_1_8;
slist = 7;
dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x9fff) | (1 << 13));
} else {
if (state->fe.dtv_property_cache.guard_interval == GUARD_INTERVAL_AUTO) {
if (state->fe.dtv_property_cache.transmission_mode == TRANSMISSION_MODE_AUTO) {
slist = 7;
dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x9fff) | (1 << 13)); // P_mode = 1 to have autosearch start ok with mode2
} else
slist = 3;
} else {
if (state->fe.dtv_property_cache.transmission_mode == TRANSMISSION_MODE_AUTO) {
slist = 2;
dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x9fff) | (1 << 13)); // P_mode = 1
} else
slist = 0;
}
if (state->fe.dtv_property_cache.transmission_mode == TRANSMISSION_MODE_AUTO)
state->fe.dtv_property_cache.transmission_mode = TRANSMISSION_MODE_8K;
if (state->fe.dtv_property_cache.guard_interval == GUARD_INTERVAL_AUTO)
state->fe.dtv_property_cache.guard_interval = GUARD_INTERVAL_1_8;
dprintk("using list for autosearch : %d", slist);
dib8000_set_channel(state, (unsigned char)slist, 1);
//dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x9fff) | (1 << 13)); // P_mode = 1
factor = 1;
//set lock_mask values
dib8000_write_word(state, 6, 0x4);
dib8000_write_word(state, 7, 0x8);
dib8000_write_word(state, 8, 0x1000);
//set lock_mask wait time values
value = 50 * state->cfg.pll->internal * factor;
dib8000_write_word(state, 11, (u16) ((value >> 16) & 0xffff)); // lock0 wait time
dib8000_write_word(state, 12, (u16) (value & 0xffff)); // lock0 wait time
value = 100 * state->cfg.pll->internal * factor;
dib8000_write_word(state, 13, (u16) ((value >> 16) & 0xffff)); // lock1 wait time
dib8000_write_word(state, 14, (u16) (value & 0xffff)); // lock1 wait time
value = 1000 * state->cfg.pll->internal * factor;
dib8000_write_word(state, 15, (u16) ((value >> 16) & 0xffff)); // lock2 wait time
dib8000_write_word(state, 16, (u16) (value & 0xffff)); // lock2 wait time
value = dib8000_read_word(state, 0);
dib8000_write_word(state, 0, (u16) ((1 << 15) | value));
dib8000_read_word(state, 1284); // reset the INT. n_irq_pending
dib8000_write_word(state, 0, (u16) value);
}
return 0;
}
static int dib8000_autosearch_irq(struct dvb_frontend *fe)
{
struct dib8000_state *state = fe->demodulator_priv;
u16 irq_pending = dib8000_read_word(state, 1284);
if (irq_pending & 0x1) { // failed
dprintk("dib8000_autosearch_irq failed");
return 1;
}
if (irq_pending & 0x2) { // succeeded
dprintk("dib8000_autosearch_irq succeeded");
return 2;
}
return 0; // still pending
}
static int dib8000_tune(struct dvb_frontend *fe)
{
struct dib8000_state *state = fe->demodulator_priv;
int ret = 0;
u16 value, mode = fft_to_mode(state);
// we are already tuned - just resuming from suspend
if (state == NULL)
return -EINVAL;
dib8000_set_bandwidth(state, state->fe.dtv_property_cache.bandwidth_hz / 1000);
dib8000_set_channel(state, 0, 0);
// restart demod
ret |= dib8000_write_word(state, 770, 0x4000);
ret |= dib8000_write_word(state, 770, 0x0000);
msleep(45);
/* P_ctrl_inh_cor=0, P_ctrl_alpha_cor=4, P_ctrl_inh_isi=0, P_ctrl_alpha_isi=3 */
/* ret |= dib8000_write_word(state, 29, (0 << 9) | (4 << 5) | (0 << 4) | (3 << 0) ); workaround inh_isi stays at 1 */
// never achieved a lock before - wait for timfreq to update
if (state->timf == 0) {
if (state->fe.dtv_property_cache.isdbt_sb_mode == 1) {
if (state->fe.dtv_property_cache.isdbt_partial_reception == 0) // Sound Broadcasting mode 1 seg
msleep(300);
else // Sound Broadcasting mode 3 seg
msleep(500);
} else // 13 seg
msleep(200);
}
//dump_reg(state);
if (state->fe.dtv_property_cache.isdbt_sb_mode == 1) {
if (state->fe.dtv_property_cache.isdbt_partial_reception == 0) { // Sound Broadcasting mode 1 seg
/* P_timf_alpha = (13-P_mode) , P_corm_alpha=6, P_corm_thres=0x40 alpha to check on board */
dib8000_write_word(state, 32, ((13 - mode) << 12) | (6 << 8) | 0x40);
//dib8000_write_word(state, 32, (8 << 12) | (6 << 8) | 0x80);
/* P_ctrl_sfreq_step= (12-P_mode) P_ctrl_sfreq_inh =0 P_ctrl_pha_off_max */
ret |= dib8000_write_word(state, 37, (12 - mode) | ((5 + mode) << 5));
} else { // Sound Broadcasting mode 3 seg
/* P_timf_alpha = (12-P_mode) , P_corm_alpha=6, P_corm_thres=0x60 alpha to check on board */
dib8000_write_word(state, 32, ((12 - mode) << 12) | (6 << 8) | 0x60);
ret |= dib8000_write_word(state, 37, (11 - mode) | ((5 + mode) << 5));
}
} else { // 13 seg
/* P_timf_alpha = 8 , P_corm_alpha=6, P_corm_thres=0x80 alpha to check on board */
dib8000_write_word(state, 32, ((11 - mode) << 12) | (6 << 8) | 0x80);
ret |= dib8000_write_word(state, 37, (10 - mode) | ((5 + mode) << 5));
}
// we achieved a coff_cpil_lock - it's time to update the timf
if ((dib8000_read_word(state, 568) >> 11) & 0x1)
dib8000_update_timf(state);
//now that tune is finished, lock0 should lock on fec_mpeg to output this lock on MP_LOCK. It's changed in autosearch start
dib8000_write_word(state, 6, 0x200);
if (state->revision == 0x8002) {
value = dib8000_read_word(state, 903);
dib8000_write_word(state, 903, value & ~(1 << 3));
msleep(1);
dib8000_write_word(state, 903, value | (1 << 3));
}
return ret;
}
static int dib8000_wakeup(struct dvb_frontend *fe)
{
struct dib8000_state *state = fe->demodulator_priv;
dib8000_set_power_mode(state, DIB8000M_POWER_ALL);
dib8000_set_adc_state(state, DIBX000_ADC_ON);
if (dib8000_set_adc_state(state, DIBX000_SLOW_ADC_ON) != 0)
dprintk("could not start Slow ADC");
return 0;
}
static int dib8000_sleep(struct dvb_frontend *fe)
{
struct dib8000_state *st = fe->demodulator_priv;
if (1) {
dib8000_set_output_mode(st, OUTMODE_HIGH_Z);
dib8000_set_power_mode(st, DIB8000M_POWER_INTERFACE_ONLY);
return dib8000_set_adc_state(st, DIBX000_SLOW_ADC_OFF) | dib8000_set_adc_state(st, DIBX000_ADC_OFF);
} else {
return 0;
}
}
enum frontend_tune_state dib8000_get_tune_state(struct dvb_frontend *fe)
{
struct dib8000_state *state = fe->demodulator_priv;
return state->tune_state;
}
EXPORT_SYMBOL(dib8000_get_tune_state);
int dib8000_set_tune_state(struct dvb_frontend *fe, enum frontend_tune_state tune_state)
{
struct dib8000_state *state = fe->demodulator_priv;
state->tune_state = tune_state;
return 0;
}
EXPORT_SYMBOL(dib8000_set_tune_state);
static int dib8000_get_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *fep)
{
struct dib8000_state *state = fe->demodulator_priv;
u16 i, val = 0;
fe->dtv_property_cache.bandwidth_hz = 6000000;
fe->dtv_property_cache.isdbt_sb_mode = dib8000_read_word(state, 508) & 0x1;
val = dib8000_read_word(state, 570);
fe->dtv_property_cache.inversion = (val & 0x40) >> 6;
switch ((val & 0x30) >> 4) {
case 1:
fe->dtv_property_cache.transmission_mode = TRANSMISSION_MODE_2K;
break;
case 3:
default:
fe->dtv_property_cache.transmission_mode = TRANSMISSION_MODE_8K;
break;
}
switch (val & 0x3) {
case 0:
fe->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_32;
dprintk("dib8000_get_frontend GI = 1/32 ");
break;
case 1:
fe->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_16;
dprintk("dib8000_get_frontend GI = 1/16 ");
break;
case 2:
dprintk("dib8000_get_frontend GI = 1/8 ");
fe->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_8;
break;
case 3:
dprintk("dib8000_get_frontend GI = 1/4 ");
fe->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_4;
break;
}
val = dib8000_read_word(state, 505);
fe->dtv_property_cache.isdbt_partial_reception = val & 1;
dprintk("dib8000_get_frontend : partial_reception = %d ", fe->dtv_property_cache.isdbt_partial_reception);
for (i = 0; i < 3; i++) {
val = dib8000_read_word(state, 493 + i);
fe->dtv_property_cache.layer[i].segment_count = val & 0x0F;
dprintk("dib8000_get_frontend : Layer %d segments = %d ", i, fe->dtv_property_cache.layer[i].segment_count);
val = dib8000_read_word(state, 499 + i);
fe->dtv_property_cache.layer[i].interleaving = val & 0x3;
dprintk("dib8000_get_frontend : Layer %d time_intlv = %d ", i, fe->dtv_property_cache.layer[i].interleaving);
val = dib8000_read_word(state, 481 + i);
switch (val & 0x7) {
case 1:
fe->dtv_property_cache.layer[i].fec = FEC_1_2;
dprintk("dib8000_get_frontend : Layer %d Code Rate = 1/2 ", i);
break;
case 2:
fe->dtv_property_cache.layer[i].fec = FEC_2_3;
dprintk("dib8000_get_frontend : Layer %d Code Rate = 2/3 ", i);
break;
case 3:
fe->dtv_property_cache.layer[i].fec = FEC_3_4;
dprintk("dib8000_get_frontend : Layer %d Code Rate = 3/4 ", i);
break;
case 5:
fe->dtv_property_cache.layer[i].fec = FEC_5_6;
dprintk("dib8000_get_frontend : Layer %d Code Rate = 5/6 ", i);
break;
default:
fe->dtv_property_cache.layer[i].fec = FEC_7_8;
dprintk("dib8000_get_frontend : Layer %d Code Rate = 7/8 ", i);
break;
}
val = dib8000_read_word(state, 487 + i);
switch (val & 0x3) {
case 0:
dprintk("dib8000_get_frontend : Layer %d DQPSK ", i);
fe->dtv_property_cache.layer[i].modulation = DQPSK;
break;
case 1:
fe->dtv_property_cache.layer[i].modulation = QPSK;
dprintk("dib8000_get_frontend : Layer %d QPSK ", i);
break;
case 2:
fe->dtv_property_cache.layer[i].modulation = QAM_16;
dprintk("dib8000_get_frontend : Layer %d QAM16 ", i);
break;
case 3:
default:
dprintk("dib8000_get_frontend : Layer %d QAM64 ", i);
fe->dtv_property_cache.layer[i].modulation = QAM_64;
break;
}
}
return 0;
}
static int dib8000_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *fep)
{
struct dib8000_state *state = fe->demodulator_priv;
int time, ret;
fe->dtv_property_cache.delivery_system = SYS_ISDBT;
dib8000_set_output_mode(state, OUTMODE_HIGH_Z);
if (fe->ops.tuner_ops.set_params)
fe->ops.tuner_ops.set_params(fe, fep);
/* start up the AGC */
state->tune_state = CT_AGC_START;
do {
time = dib8000_agc_startup(fe);
if (time != FE_CALLBACK_TIME_NEVER)
msleep(time / 10);
else
break;
} while (state->tune_state != CT_AGC_STOP);
if (state->fe.dtv_property_cache.frequency == 0) {
dprintk("dib8000: must at least specify frequency ");
return 0;
}
if (state->fe.dtv_property_cache.bandwidth_hz == 0) {
dprintk("dib8000: no bandwidth specified, set to default ");
state->fe.dtv_property_cache.bandwidth_hz = 6000000;
}
state->tune_state = CT_DEMOD_START;
if ((state->fe.dtv_property_cache.delivery_system != SYS_ISDBT) ||
(state->fe.dtv_property_cache.inversion == INVERSION_AUTO) ||
(state->fe.dtv_property_cache.transmission_mode == TRANSMISSION_MODE_AUTO) ||
(state->fe.dtv_property_cache.guard_interval == GUARD_INTERVAL_AUTO) ||
(((state->fe.dtv_property_cache.isdbt_layer_enabled & (1 << 0)) != 0) &&
(state->fe.dtv_property_cache.layer[0].segment_count != 0xff) &&
(state->fe.dtv_property_cache.layer[0].segment_count != 0) &&
((state->fe.dtv_property_cache.layer[0].modulation == QAM_AUTO) ||
(state->fe.dtv_property_cache.layer[0].fec == FEC_AUTO))) ||
(((state->fe.dtv_property_cache.isdbt_layer_enabled & (1 << 1)) != 0) &&
(state->fe.dtv_property_cache.layer[1].segment_count != 0xff) &&
(state->fe.dtv_property_cache.layer[1].segment_count != 0) &&
((state->fe.dtv_property_cache.layer[1].modulation == QAM_AUTO) ||
(state->fe.dtv_property_cache.layer[1].fec == FEC_AUTO))) ||
(((state->fe.dtv_property_cache.isdbt_layer_enabled & (1 << 2)) != 0) &&
(state->fe.dtv_property_cache.layer[2].segment_count != 0xff) &&
(state->fe.dtv_property_cache.layer[2].segment_count != 0) &&
((state->fe.dtv_property_cache.layer[2].modulation == QAM_AUTO) ||
(state->fe.dtv_property_cache.layer[2].fec == FEC_AUTO))) ||
(((state->fe.dtv_property_cache.layer[0].segment_count == 0) ||
((state->fe.dtv_property_cache.isdbt_layer_enabled & (1 << 0)) == 0)) &&
((state->fe.dtv_property_cache.layer[1].segment_count == 0) ||
((state->fe.dtv_property_cache.isdbt_layer_enabled & (2 << 0)) == 0)) &&
((state->fe.dtv_property_cache.layer[2].segment_count == 0) || ((state->fe.dtv_property_cache.isdbt_layer_enabled & (3 << 0)) == 0)))) {
int i = 800, found;
dib8000_set_bandwidth(state, fe->dtv_property_cache.bandwidth_hz / 1000);
dib8000_autosearch_start(fe);
do {
msleep(10);
found = dib8000_autosearch_irq(fe);
} while (found == 0 && i--);
dprintk("Frequency %d Hz, autosearch returns: %d", fep->frequency, found);
if (found == 0 || found == 1)
return 0; // no channel found
dib8000_get_frontend(fe, fep);
}
ret = dib8000_tune(fe);
/* make this a config parameter */
dib8000_set_output_mode(state, state->cfg.output_mode);
return ret;
}
static int dib8000_read_status(struct dvb_frontend *fe, fe_status_t * stat)
{
struct dib8000_state *state = fe->demodulator_priv;
u16 lock = dib8000_read_word(state, 568);
*stat = 0;
if ((lock >> 13) & 1)
*stat |= FE_HAS_SIGNAL;
if ((lock >> 8) & 1) /* Equal */
*stat |= FE_HAS_CARRIER;
if (((lock >> 1) & 0xf) == 0xf) /* TMCC_SYNC */
*stat |= FE_HAS_SYNC;
if (((lock >> 12) & 1) && ((lock >> 5) & 7)) /* FEC MPEG */
*stat |= FE_HAS_LOCK;
if ((lock >> 12) & 1) {
lock = dib8000_read_word(state, 554); /* Viterbi Layer A */
if (lock & 0x01)
*stat |= FE_HAS_VITERBI;
lock = dib8000_read_word(state, 555); /* Viterbi Layer B */
if (lock & 0x01)
*stat |= FE_HAS_VITERBI;
lock = dib8000_read_word(state, 556); /* Viterbi Layer C */
if (lock & 0x01)
*stat |= FE_HAS_VITERBI;
}
return 0;
}
static int dib8000_read_ber(struct dvb_frontend *fe, u32 * ber)
{
struct dib8000_state *state = fe->demodulator_priv;
*ber = (dib8000_read_word(state, 560) << 16) | dib8000_read_word(state, 561); // 13 segments
return 0;
}
static int dib8000_read_unc_blocks(struct dvb_frontend *fe, u32 * unc)
{
struct dib8000_state *state = fe->demodulator_priv;
*unc = dib8000_read_word(state, 565); // packet error on 13 seg
return 0;
}
static int dib8000_read_signal_strength(struct dvb_frontend *fe, u16 * strength)
{
struct dib8000_state *state = fe->demodulator_priv;
u16 val = dib8000_read_word(state, 390);
*strength = 65535 - val;
return 0;
}
static int dib8000_read_snr(struct dvb_frontend *fe, u16 * snr)
{
struct dib8000_state *state = fe->demodulator_priv;
u16 val;
s32 signal_mant, signal_exp, noise_mant, noise_exp;
u32 result = 0;
val = dib8000_read_word(state, 542);
noise_mant = (val >> 6) & 0xff;
noise_exp = (val & 0x3f);
val = dib8000_read_word(state, 543);
signal_mant = (val >> 6) & 0xff;
signal_exp = (val & 0x3f);
if ((noise_exp & 0x20) != 0)
noise_exp -= 0x40;
if ((signal_exp & 0x20) != 0)
signal_exp -= 0x40;
if (signal_mant != 0)
result = intlog10(2) * 10 * signal_exp + 10 * intlog10(signal_mant);
else
result = intlog10(2) * 10 * signal_exp - 100;
if (noise_mant != 0)
result -= intlog10(2) * 10 * noise_exp + 10 * intlog10(noise_mant);
else
result -= intlog10(2) * 10 * noise_exp - 100;
*snr = result / ((1 << 24) / 10);
return 0;
}
int dib8000_i2c_enumeration(struct i2c_adapter *host, int no_of_demods, u8 default_addr, u8 first_addr)
{
int k = 0;
u8 new_addr = 0;
struct i2c_device client = {.adap = host };
for (k = no_of_demods - 1; k >= 0; k--) {
/* designated i2c address */
new_addr = first_addr + (k << 1);
client.addr = new_addr;
dib8000_i2c_write16(&client, 1287, 0x0003); /* sram lead in, rdy */
if (dib8000_identify(&client) == 0) {
dib8000_i2c_write16(&client, 1287, 0x0003); /* sram lead in, rdy */
client.addr = default_addr;
if (dib8000_identify(&client) == 0) {
dprintk("#%d: not identified", k);
return -EINVAL;
}
}
/* start diversity to pull_down div_str - just for i2c-enumeration */
dib8000_i2c_write16(&client, 1286, (1 << 10) | (4 << 6));
/* set new i2c address and force divstart */
dib8000_i2c_write16(&client, 1285, (new_addr << 2) | 0x2);
client.addr = new_addr;
dib8000_identify(&client);
dprintk("IC %d initialized (to i2c_address 0x%x)", k, new_addr);
}
for (k = 0; k < no_of_demods; k++) {
new_addr = first_addr | (k << 1);
client.addr = new_addr;
// unforce divstr
dib8000_i2c_write16(&client, 1285, new_addr << 2);
/* deactivate div - it was just for i2c-enumeration */
dib8000_i2c_write16(&client, 1286, 0);
}
return 0;
}
EXPORT_SYMBOL(dib8000_i2c_enumeration);
static int dib8000_fe_get_tune_settings(struct dvb_frontend *fe, struct dvb_frontend_tune_settings *tune)
{
tune->min_delay_ms = 1000;
tune->step_size = 0;
tune->max_drift = 0;
return 0;
}
static void dib8000_release(struct dvb_frontend *fe)
{
struct dib8000_state *st = fe->demodulator_priv;
dibx000_exit_i2c_master(&st->i2c_master);
kfree(st);
}
struct i2c_adapter *dib8000_get_i2c_master(struct dvb_frontend *fe, enum dibx000_i2c_interface intf, int gating)
{
struct dib8000_state *st = fe->demodulator_priv;
return dibx000_get_i2c_adapter(&st->i2c_master, intf, gating);
}
EXPORT_SYMBOL(dib8000_get_i2c_master);
int dib8000_pid_filter_ctrl(struct dvb_frontend *fe, u8 onoff)
{
struct dib8000_state *st = fe->demodulator_priv;
u16 val = dib8000_read_word(st, 299) & 0xffef;
val |= (onoff & 0x1) << 4;
dprintk("pid filter enabled %d", onoff);
return dib8000_write_word(st, 299, val);
}
EXPORT_SYMBOL(dib8000_pid_filter_ctrl);
int dib8000_pid_filter(struct dvb_frontend *fe, u8 id, u16 pid, u8 onoff)
{
struct dib8000_state *st = fe->demodulator_priv;
dprintk("Index %x, PID %d, OnOff %d", id, pid, onoff);
return dib8000_write_word(st, 305 + id, onoff ? (1 << 13) | pid : 0);
}
EXPORT_SYMBOL(dib8000_pid_filter);
static const struct dvb_frontend_ops dib8000_ops = {
.info = {
.name = "DiBcom 8000 ISDB-T",
.type = FE_OFDM,
.frequency_min = 44250000,
.frequency_max = 867250000,
.frequency_stepsize = 62500,
.caps = FE_CAN_INVERSION_AUTO |
FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_RECOVER | FE_CAN_HIERARCHY_AUTO,
},
.release = dib8000_release,
.init = dib8000_wakeup,
.sleep = dib8000_sleep,
.set_frontend = dib8000_set_frontend,
.get_tune_settings = dib8000_fe_get_tune_settings,
.get_frontend = dib8000_get_frontend,
.read_status = dib8000_read_status,
.read_ber = dib8000_read_ber,
.read_signal_strength = dib8000_read_signal_strength,
.read_snr = dib8000_read_snr,
.read_ucblocks = dib8000_read_unc_blocks,
};
struct dvb_frontend *dib8000_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib8000_config *cfg)
{
struct dvb_frontend *fe;
struct dib8000_state *state;
dprintk("dib8000_attach");
state = kzalloc(sizeof(struct dib8000_state), GFP_KERNEL);
if (state == NULL)
return NULL;
memcpy(&state->cfg, cfg, sizeof(struct dib8000_config));
state->i2c.adap = i2c_adap;
state->i2c.addr = i2c_addr;
state->gpio_val = cfg->gpio_val;
state->gpio_dir = cfg->gpio_dir;
/* Ensure the output mode remains at the previous default if it's
* not specifically set by the caller.
*/
if ((state->cfg.output_mode != OUTMODE_MPEG2_SERIAL) && (state->cfg.output_mode != OUTMODE_MPEG2_PAR_GATED_CLK))
state->cfg.output_mode = OUTMODE_MPEG2_FIFO;
fe = &state->fe;
fe->demodulator_priv = state;
memcpy(&state->fe.ops, &dib8000_ops, sizeof(struct dvb_frontend_ops));
state->timf_default = cfg->pll->timf;
if (dib8000_identify(&state->i2c) == 0)
goto error;
dibx000_init_i2c_master(&state->i2c_master, DIB8000, state->i2c.adap, state->i2c.addr);
dib8000_reset(fe);
dib8000_write_word(state, 285, (dib8000_read_word(state, 285) & ~0x60) | (3 << 5)); /* ber_rs_len = 3 */
return fe;
error:
kfree(state);
return NULL;
}
EXPORT_SYMBOL(dib8000_attach);
MODULE_AUTHOR("Olivier Grenie <Olivier.Grenie@dibcom.fr, " "Patrick Boettcher <pboettcher@dibcom.fr>");
MODULE_DESCRIPTION("Driver for the DiBcom 8000 ISDB-T demodulator");
MODULE_LICENSE("GPL");