linux/arch/ppc/platforms/pal4_setup.c

175 lines
4.4 KiB
C
Raw Normal View History

/*
* Board setup routines for the SBS PalomarIV.
*
* Author: Dan Cox
*
* 2002 (c) MontaVista, Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/reboot.h>
#include <linux/time.h>
#include <linux/irq.h>
#include <linux/kdev_t.h>
#include <linux/initrd.h>
#include <linux/console.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <asm/io.h>
#include <asm/todc.h>
#include <asm/bootinfo.h>
#include <asm/machdep.h>
#include <syslib/cpc700.h>
#include "pal4.h"
extern void pal4_find_bridges(void);
unsigned int cpc700_irq_assigns[][2] = {
{1, 1}, /* IRQ 0: ECC correctable error */
{1, 1}, /* IRQ 1: PCI write to memory range */
{0, 1}, /* IRQ 2: PCI write to command register */
{0, 1}, /* IRQ 3: UART 0 */
{0, 1}, /* IRQ 4: UART 1 */
{0, 1}, /* IRQ 5: ICC 0 */
{0, 1}, /* IRQ 6: ICC 1 */
{0, 1}, /* IRQ 7: GPT compare 0 */
{0, 1}, /* IRQ 8: GPT compare 1 */
{0, 1}, /* IRQ 9: GPT compare 2 */
{0, 1}, /* IRQ 10: GPT compare 3 */
{0, 1}, /* IRQ 11: GPT compare 4 */
{0, 1}, /* IRQ 12: GPT capture 0 */
{0, 1}, /* IRQ 13: GPT capture 1 */
{0, 1}, /* IRQ 14: GPT capture 2 */
{0, 1}, /* IRQ 15: GPT capture 3 */
{0, 1}, /* IRQ 16: GPT capture 4 */
{0, 0}, /* IRQ 17: reserved */
{0, 0}, /* IRQ 18: reserved */
{0, 0}, /* IRQ 19: reserved */
{0, 0}, /* IRQ 20: reserved */
{0, 1}, /* IRQ 21: Ethernet */
{0, 0}, /* IRQ 22: reserved */
{0, 0}, /* IRQ 23: reserved */
{0, 0}, /* IRQ 24: resreved */
{0, 0}, /* IRQ 25: reserved */
{0, 0}, /* IRQ 26: reserved */
{0, 0}, /* IRQ 27: reserved */
{0, 0}, /* IRQ 28: reserved */
{0, 0}, /* IRQ 29: reserved */
{0, 0}, /* IRQ 30: reserved */
{0, 0}, /* IRQ 31: reserved */
};
static int
pal4_show_cpuinfo(struct seq_file *m)
{
seq_printf(m, "board\t\t: SBS Palomar IV\n");
return 0;
}
static void
pal4_restart(char *cmd)
{
local_irq_disable();
__asm__ __volatile__("lis 3,0xfff0\n \
ori 3,3,0x100\n \
mtspr 26,3\n \
li 3,0\n \
mtspr 27,3\n \
rfi");
for(;;);
}
static void
pal4_power_off(void)
{
local_irq_disable();
for(;;);
}
static void
pal4_halt(void)
{
pal4_power_off();
}
TODC_ALLOC();
static void __init
pal4_setup_arch(void)
{
unsigned long l2;
TODC_INIT(TODC_TYPE_MK48T37, 0, 0,
ioremap(PAL4_NVRAM, PAL4_NVRAM_SIZE), 8);
pal4_find_bridges();
#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start)
ROOT_DEV = Root_RAM0;
else
#endif
ROOT_DEV = Root_NFS;
/* The L2 gets disabled in the bootloader, but all the proper
bits should be present from the fw, so just re-enable it */
l2 = _get_L2CR();
if (!(l2 & L2CR_L2E)) {
/* presume that it was initially set if the size is
still present. */
if (l2 ^ L2CR_L2SIZ_MASK)
_set_L2CR(l2 | L2CR_L2E);
else
printk("L2 not set by firmware; left disabled.\n");
}
}
static void __init
pal4_map_io(void)
{
io_block_mapping(0xf0000000, 0xf0000000, 0x10000000, _PAGE_IO);
}
void __init
platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7)
{
parse_bootinfo(find_bootinfo());
isa_io_base = 0 /*PAL4_ISA_IO_BASE*/;
pci_dram_offset = 0 /*PAL4_PCI_SYS_MEM_BASE*/;
ppc_md.setup_arch = pal4_setup_arch;
ppc_md.show_cpuinfo = pal4_show_cpuinfo;
ppc_md.setup_io_mappings = pal4_map_io;
ppc_md.init_IRQ = cpc700_init_IRQ;
ppc_md.get_irq = cpc700_get_irq;
ppc_md.restart = pal4_restart;
ppc_md.halt = pal4_halt;
ppc_md.power_off = pal4_power_off;
ppc_md.time_init = todc_time_init;
ppc_md.set_rtc_time = todc_set_rtc_time;
ppc_md.get_rtc_time = todc_get_rtc_time;
ppc_md.calibrate_decr = todc_calibrate_decr;
ppc_md.nvram_read_val = todc_direct_read_val;
ppc_md.nvram_write_val = todc_direct_write_val;
}