linux/scripts/link-vmlinux.sh

258 lines
6.0 KiB
Bash
Raw Normal View History

#!/bin/sh
#
# link vmlinux
#
# vmlinux is linked from the objects selected by $(KBUILD_VMLINUX_INIT) and
# $(KBUILD_VMLINUX_MAIN). Most are built-in.o files from top-level directories
# in the kernel tree, others are specified in arch/$(ARCH)/Makefile.
# Ordering when linking is important, and $(KBUILD_VMLINUX_INIT) must be first.
#
# vmlinux
# ^
# |
# +-< $(KBUILD_VMLINUX_INIT)
# | +--< init/version.o + more
# |
# +--< $(KBUILD_VMLINUX_MAIN)
# | +--< drivers/built-in.o mm/built-in.o + more
# |
# +-< ${kallsymso} (see description in KALLSYMS section)
#
# vmlinux version (uname -v) cannot be updated during normal
# descending-into-subdirs phase since we do not yet know if we need to
# update vmlinux.
# Therefore this step is delayed until just before final link of vmlinux.
#
# System.map is generated to document addresses of all kernel symbols
# Error out on error
set -e
# Nice output in kbuild format
# Will be supressed by "make -s"
info()
{
if [ "${quiet}" != "silent_" ]; then
printf " %-7s %s\n" ${1} ${2}
fi
}
# Link of vmlinux.o used for section mismatch analysis
# ${1} output file
modpost_link()
{
${LD} ${LDFLAGS} -r -o ${1} ${KBUILD_VMLINUX_INIT} \
--start-group ${KBUILD_VMLINUX_MAIN} --end-group
}
# Link of vmlinux
# ${1} - optional extra .o files
# ${2} - output file
vmlinux_link()
{
local lds="${objtree}/${KBUILD_LDS}"
if [ "${SRCARCH}" != "um" ]; then
${LD} ${LDFLAGS} ${LDFLAGS_vmlinux} -o ${2} \
-T ${lds} ${KBUILD_VMLINUX_INIT} \
--start-group ${KBUILD_VMLINUX_MAIN} --end-group ${1}
else
${CC} ${CFLAGS_vmlinux} -o ${2} \
-Wl,-T,${lds} ${KBUILD_VMLINUX_INIT} \
-Wl,--start-group \
${KBUILD_VMLINUX_MAIN} \
-Wl,--end-group \
-lutil -lrt -lpthread ${1}
rm -f linux
fi
}
# Create ${2} .o file with all symbols from the ${1} object file
kallsyms()
{
info KSYM ${2}
local kallsymopt;
if [ -n "${CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX}" ]; then
kallsymopt="${kallsymopt} --symbol-prefix=_"
fi
if [ -n "${CONFIG_KALLSYMS_ALL}" ]; then
kallsymopt="${kallsymopt} --all-symbols"
fi
if [ -n "${CONFIG_ARM}" ] && [ -z "${CONFIG_XIP_KERNEL}" ] && [ -n "${CONFIG_PAGE_OFFSET}" ]; then
kallsymopt="${kallsymopt} --page-offset=$CONFIG_PAGE_OFFSET"
fi
if [ -n "${CONFIG_KALLSYMS_ABSOLUTE_PERCPU}" ]; then
kallsyms: fix percpu vars on x86-64 with relocation. x86-64 has a problem: per-cpu variables are actually represented by their absolute offsets within the per-cpu area, but the symbols are not emitted as absolute. Thus kallsyms naively creates them as offsets from _text, meaning their values change if the kernel is relocated (especially noticeable with CONFIG_RANDOMIZE_BASE): $ egrep ' (gdt_|_(stext|_per_cpu_))' /root/kallsyms.nokaslr 0000000000000000 D __per_cpu_start 0000000000004000 D gdt_page 0000000000014280 D __per_cpu_end ffffffff810001c8 T _stext ffffffff81ee53c0 D __per_cpu_offset $ egrep ' (gdt_|_(stext|_per_cpu_))' /root/kallsyms.kaslr1 000000001f200000 D __per_cpu_start 000000001f204000 D gdt_page 000000001f214280 D __per_cpu_end ffffffffa02001c8 T _stext ffffffffa10e53c0 D __per_cpu_offset Making them absolute symbols is the Right Thing, but requires fixes to the relocs tool. So for the moment, we add a --absolute-percpu option which makes them absolute from a kallsyms perspective: $ egrep ' (gdt_|_(stext|_per_cpu_))' /proc/kallsyms # no KASLR 0000000000000000 A __per_cpu_start 000000000000a000 A gdt_page 0000000000013040 A __per_cpu_end ffffffff802001c8 T _stext ffffffff8099b180 D __per_cpu_offset ffffffff809a3000 D __per_cpu_load $ egrep ' (gdt_|_(stext|_per_cpu_))' /proc/kallsyms # With KASLR 0000000000000000 A __per_cpu_start 000000000000a000 A gdt_page 0000000000013040 A __per_cpu_end ffffffff89c001c8 T _stext ffffffff8a39d180 D __per_cpu_offset ffffffff8a3a5000 D __per_cpu_load Based-on-the-original-screenplay-by: Andy Honig <ahonig@google.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Kees Cook <keescook@chromium.org>
2014-03-17 04:35:46 +01:00
kallsymopt="${kallsymopt} --absolute-percpu"
fi
kallsyms: add support for relative offsets in kallsyms address table Similar to how relative extables are implemented, it is possible to emit the kallsyms table in such a way that it contains offsets relative to some anchor point in the kernel image rather than absolute addresses. On 64-bit architectures, it cuts the size of the kallsyms address table in half, since offsets between kernel symbols can typically be expressed in 32 bits. This saves several hundreds of kilobytes of permanent .rodata on average. In addition, the kallsyms address table is no longer subject to dynamic relocation when CONFIG_RELOCATABLE is in effect, so the relocation work done after decompression now doesn't have to do relocation updates for all these values. This saves up to 24 bytes (i.e., the size of a ELF64 RELA relocation table entry) per value, which easily adds up to a couple of megabytes of uncompressed __init data on ppc64 or arm64. Even if these relocation entries typically compress well, the combined size reduction of 2.8 MB uncompressed for a ppc64_defconfig build (of which 2.4 MB is __init data) results in a ~500 KB space saving in the compressed image. Since it is useful for some architectures (like x86) to retain the ability to emit absolute values as well, this patch also adds support for capturing both absolute and relative values when KALLSYMS_ABSOLUTE_PERCPU is in effect, by emitting absolute per-cpu addresses as positive 32-bit values, and addresses relative to the lowest encountered relative symbol as negative values, which are subtracted from the runtime address of this base symbol to produce the actual address. Support for the above is enabled by default for all architectures except IA-64 and Tile-GX, whose symbols are too far apart to capture in this manner. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Kees Cook <keescook@chromium.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Ingo Molnar <mingo@kernel.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michal Marek <mmarek@suse.cz> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-15 22:58:19 +01:00
if [ -n "${CONFIG_KALLSYMS_BASE_RELATIVE}" ]; then
kallsymopt="${kallsymopt} --base-relative"
fi
local aflags="${KBUILD_AFLAGS} ${KBUILD_AFLAGS_KERNEL} \
${NOSTDINC_FLAGS} ${LINUXINCLUDE} ${KBUILD_CPPFLAGS}"
local afile="`basename ${2} .o`.S"
${NM} -n ${1} | scripts/kallsyms ${kallsymopt} > ${afile}
${CC} ${aflags} -c -o ${2} ${afile}
}
# Create map file with all symbols from ${1}
# See mksymap for additional details
mksysmap()
{
${CONFIG_SHELL} "${srctree}/scripts/mksysmap" ${1} ${2}
}
sortextable()
{
${objtree}/scripts/sortextable ${1}
}
# Delete output files in case of error
cleanup()
{
rm -f .old_version
rm -f .tmp_System.map
rm -f .tmp_kallsyms*
rm -f .tmp_version
rm -f .tmp_vmlinux*
rm -f System.map
rm -f vmlinux
rm -f vmlinux.o
}
on_exit()
{
if [ $? -ne 0 ]; then
cleanup
fi
}
trap on_exit EXIT
on_signals()
{
exit 1
}
trap on_signals HUP INT QUIT TERM
#
#
# Use "make V=1" to debug this script
case "${KBUILD_VERBOSE}" in
*1*)
set -x
;;
esac
if [ "$1" = "clean" ]; then
cleanup
exit 0
fi
# We need access to CONFIG_ symbols
case "${KCONFIG_CONFIG}" in
*/*)
. "${KCONFIG_CONFIG}"
;;
*)
# Force using a file from the current directory
. "./${KCONFIG_CONFIG}"
esac
#link vmlinux.o
info LD vmlinux.o
modpost_link vmlinux.o
# modpost vmlinux.o to check for section mismatches
${MAKE} -f "${srctree}/scripts/Makefile.modpost" vmlinux.o
# Update version
info GEN .version
if [ ! -r .version ]; then
rm -f .version;
echo 1 >.version;
else
mv .version .old_version;
expr 0$(cat .old_version) + 1 >.version;
fi;
# final build of init/
${MAKE} -f "${srctree}/scripts/Makefile.build" obj=init
kallsymso=""
kallsyms_vmlinux=""
if [ -n "${CONFIG_KALLSYMS}" ]; then
# kallsyms support
# Generate section listing all symbols and add it into vmlinux
# It's a three step process:
# 1) Link .tmp_vmlinux1 so it has all symbols and sections,
# but __kallsyms is empty.
# Running kallsyms on that gives us .tmp_kallsyms1.o with
# the right size
# 2) Link .tmp_vmlinux2 so it now has a __kallsyms section of
# the right size, but due to the added section, some
# addresses have shifted.
# From here, we generate a correct .tmp_kallsyms2.o
# 2a) We may use an extra pass as this has been necessary to
# woraround some alignment related bugs.
# KALLSYMS_EXTRA_PASS=1 is used to trigger this.
# 3) The correct ${kallsymso} is linked into the final vmlinux.
#
# a) Verify that the System.map from vmlinux matches the map from
# ${kallsymso}.
kallsymso=.tmp_kallsyms2.o
kallsyms_vmlinux=.tmp_vmlinux2
# step 1
vmlinux_link "" .tmp_vmlinux1
kallsyms .tmp_vmlinux1 .tmp_kallsyms1.o
# step 2
vmlinux_link .tmp_kallsyms1.o .tmp_vmlinux2
kallsyms .tmp_vmlinux2 .tmp_kallsyms2.o
# step 2a
if [ -n "${KALLSYMS_EXTRA_PASS}" ]; then
kallsymso=.tmp_kallsyms3.o
kallsyms_vmlinux=.tmp_vmlinux3
vmlinux_link .tmp_kallsyms2.o .tmp_vmlinux3
kallsyms .tmp_vmlinux3 .tmp_kallsyms3.o
fi
fi
info LD vmlinux
vmlinux_link "${kallsymso}" vmlinux
if [ -n "${CONFIG_BUILDTIME_EXTABLE_SORT}" ]; then
info SORTEX vmlinux
sortextable vmlinux
fi
info SYSMAP System.map
mksysmap vmlinux System.map
# step a (see comment above)
if [ -n "${CONFIG_KALLSYMS}" ]; then
mksysmap ${kallsyms_vmlinux} .tmp_System.map
if ! cmp -s System.map .tmp_System.map; then
echo >&2 Inconsistent kallsyms data
echo >&2 Try "make KALLSYMS_EXTRA_PASS=1" as a workaround
exit 1
fi
fi
# We made a new kernel - delete old version file
rm -f .old_version