OpenE2K/linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
80d1126fae
linux/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts

166 lines
3.5 KiB
Plaintext
Raw Normal View History

ARM: shmobile: kzm9g: Reference DT implementation Provide alternate board code for the kzm9g to demonstrate how DT may be used given the current state of driver device tree support. This is intended to act as a reference for mach-shmobile developers. Some notes: * Brings up the GIC interrupt handler using device tree * Brings up the following device using device tree: - MMCIF (MMC) * Does not bring up the INTC interrupt controller at all, thus external devices may not be used. In particular, the SMSC ethernet device may not be used and thus NFS root may not be used. * Uses existing C code and not device tree to initialise the following, which are needed for a working board: - SCIF (Serial) - CMT (Clock) - PFC (GPIO) To use this alternate board code instead of the normal board code, CONFIG_MACH_KZM9G_REFERENCE should be selected in the kernel config. And the sh73a0-kzm9g-reference.dtb flattened device tree blob should be used. Includes fix by Thierry Reding to no longer use gic_handle_irq() Includes fixes by Guennadi Liakhovetski for recent pinmux changes. Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-11-21 16:34:25 +01:00
/*
* Device Tree Source for the KZM-A9-GT board
*
* Copyright (C) 2012 Horms Solutions Ltd.
*
* Based on sh73a0-kzm9g.dts
* Copyright (C) 2012 Renesas Solutions Corp.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/dts-v1/;
ARM: shmobile: sh73a0: move SDHI and MMCIF DT nodes to sh73a0.dtsi To avoid having to repeat common DT node properties in all .dts files move them to SoC's .dtsi file, setting their status to "disabled." Individual boards will pick up devices, that they want to use and change their DT node status to enabled. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-19 13:47:43 +01:00
/include/ "sh73a0.dtsi"
ARM: shmobile: kzm9g: Reference DT implementation Provide alternate board code for the kzm9g to demonstrate how DT may be used given the current state of driver device tree support. This is intended to act as a reference for mach-shmobile developers. Some notes: * Brings up the GIC interrupt handler using device tree * Brings up the following device using device tree: - MMCIF (MMC) * Does not bring up the INTC interrupt controller at all, thus external devices may not be used. In particular, the SMSC ethernet device may not be used and thus NFS root may not be used. * Uses existing C code and not device tree to initialise the following, which are needed for a working board: - SCIF (Serial) - CMT (Clock) - PFC (GPIO) To use this alternate board code instead of the normal board code, CONFIG_MACH_KZM9G_REFERENCE should be selected in the kernel config. And the sh73a0-kzm9g-reference.dtb flattened device tree blob should be used. Includes fix by Thierry Reding to no longer use gic_handle_irq() Includes fixes by Guennadi Liakhovetski for recent pinmux changes. Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-11-21 16:34:25 +01:00
/ {
model = "KZM-A9-GT";
compatible = "renesas,kzm9g-reference", "renesas,sh73a0";
ARM: shmobile: kzm9g-reference: add AS3711 and CPUFreq DT bindings This adds DT bindings for an AS3711 PMIC, used for supplying power to the CPU, some peripherals and the backlight, as well as extends the cpu0 DT node with OPPs and a reference to the PMIC to support the CPUFreq and CPU DVFS functions. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-05 12:00:37 +02:00
cpus {
cpu@0 {
cpu0-supply = <&vdd_dvfs>;
operating-points = <
/* kHz uV */
1196000 1315000
598000 1175000
398667 1065000
>;
voltage-tolerance = <1>; /* 1% */
};
};
ARM: shmobile: kzm9g: Reference DT implementation Provide alternate board code for the kzm9g to demonstrate how DT may be used given the current state of driver device tree support. This is intended to act as a reference for mach-shmobile developers. Some notes: * Brings up the GIC interrupt handler using device tree * Brings up the following device using device tree: - MMCIF (MMC) * Does not bring up the INTC interrupt controller at all, thus external devices may not be used. In particular, the SMSC ethernet device may not be used and thus NFS root may not be used. * Uses existing C code and not device tree to initialise the following, which are needed for a working board: - SCIF (Serial) - CMT (Clock) - PFC (GPIO) To use this alternate board code instead of the normal board code, CONFIG_MACH_KZM9G_REFERENCE should be selected in the kernel config. And the sh73a0-kzm9g-reference.dtb flattened device tree blob should be used. Includes fix by Thierry Reding to no longer use gic_handle_irq() Includes fixes by Guennadi Liakhovetski for recent pinmux changes. Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-11-21 16:34:25 +01:00
chosen {
bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200";
};
memory {
device_type = "memory";
reg = <0x41000000 0x1e800000>;
};
ARM: shmobile: SDHI and MMCIF interfaces to kzm9g-reference Add SDHI0 and SDHI2 interfaces to kzm9g-reference. With no pinctrl DT support we cannot use GPIO card-detection and regulator switching. Also update the MMCIF DT node to use all 8 data lines and avoid redundant information in DT. Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> [ horms+renesas@verge.net.au: Updated for pinmux changes by Laurent Pinchart ] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-02-08 19:38:27 +01:00
reg_1p8v: regulator@0 {
ARM: shmobile: kzm9g: Reference DT implementation Provide alternate board code for the kzm9g to demonstrate how DT may be used given the current state of driver device tree support. This is intended to act as a reference for mach-shmobile developers. Some notes: * Brings up the GIC interrupt handler using device tree * Brings up the following device using device tree: - MMCIF (MMC) * Does not bring up the INTC interrupt controller at all, thus external devices may not be used. In particular, the SMSC ethernet device may not be used and thus NFS root may not be used. * Uses existing C code and not device tree to initialise the following, which are needed for a working board: - SCIF (Serial) - CMT (Clock) - PFC (GPIO) To use this alternate board code instead of the normal board code, CONFIG_MACH_KZM9G_REFERENCE should be selected in the kernel config. And the sh73a0-kzm9g-reference.dtb flattened device tree blob should be used. Includes fix by Thierry Reding to no longer use gic_handle_irq() Includes fixes by Guennadi Liakhovetski for recent pinmux changes. Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-11-21 16:34:25 +01:00
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
ARM: shmobile: SDHI and MMCIF interfaces to kzm9g-reference Add SDHI0 and SDHI2 interfaces to kzm9g-reference. With no pinctrl DT support we cannot use GPIO card-detection and regulator switching. Also update the MMCIF DT node to use all 8 data lines and avoid redundant information in DT. Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> [ horms+renesas@verge.net.au: Updated for pinmux changes by Laurent Pinchart ] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-02-08 19:38:27 +01:00
regulator-always-on;
regulator-boot-on;
};
ARM: shmobile: kzm9g: SDHI0 and SDHI1 use a 3.3V power supply kzm9g supplies 3.3V to its SDHI0 and SDHI2 interfaces. Specifying 2.8V prevents some (e.g. certain SDIO) cards from working. This patch fixes the voltage and removes redundant OCR masks from platform data. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-19 13:47:39 +01:00
reg_3p3v: regulator@1 {
ARM: shmobile: SDHI and MMCIF interfaces to kzm9g-reference Add SDHI0 and SDHI2 interfaces to kzm9g-reference. With no pinctrl DT support we cannot use GPIO card-detection and regulator switching. Also update the MMCIF DT node to use all 8 data lines and avoid redundant information in DT. Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> [ horms+renesas@verge.net.au: Updated for pinmux changes by Laurent Pinchart ] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-02-08 19:38:27 +01:00
compatible = "regulator-fixed";
ARM: shmobile: kzm9g: SDHI0 and SDHI1 use a 3.3V power supply kzm9g supplies 3.3V to its SDHI0 and SDHI2 interfaces. Specifying 2.8V prevents some (e.g. certain SDIO) cards from working. This patch fixes the voltage and removes redundant OCR masks from platform data. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-19 13:47:39 +01:00
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
ARM: shmobile: SDHI and MMCIF interfaces to kzm9g-reference Add SDHI0 and SDHI2 interfaces to kzm9g-reference. With no pinctrl DT support we cannot use GPIO card-detection and regulator switching. Also update the MMCIF DT node to use all 8 data lines and avoid redundant information in DT. Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> [ horms+renesas@verge.net.au: Updated for pinmux changes by Laurent Pinchart ] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-02-08 19:38:27 +01:00
regulator-always-on;
regulator-boot-on;
};
ARM: shmobile: kzm9g-reference: add ethernet support Add a DT node for the SMSC 9221 ethernet chip, found on kzm9g, to its reference implementation. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-21 17:05:44 +01:00
lan9220@10000000 {
compatible = "smsc,lan9220", "smsc,lan9115";
reg = <0x10000000 0x100>;
phy-mode = "mii";
interrupt-parent = <&irqpin0>;
interrupts = <3 0>; /* active low */
reg-io-width = <4>;
smsc,irq-push-pull;
smsc,save-mac-address;
vddvario-supply = <&reg_1p8v>;
vdd33a-supply = <&reg_3p3v>;
};
ARM: shmobile: kzm9g: Reference DT implementation Provide alternate board code for the kzm9g to demonstrate how DT may be used given the current state of driver device tree support. This is intended to act as a reference for mach-shmobile developers. Some notes: * Brings up the GIC interrupt handler using device tree * Brings up the following device using device tree: - MMCIF (MMC) * Does not bring up the INTC interrupt controller at all, thus external devices may not be used. In particular, the SMSC ethernet device may not be used and thus NFS root may not be used. * Uses existing C code and not device tree to initialise the following, which are needed for a working board: - SCIF (Serial) - CMT (Clock) - PFC (GPIO) To use this alternate board code instead of the normal board code, CONFIG_MACH_KZM9G_REFERENCE should be selected in the kernel config. And the sh73a0-kzm9g-reference.dtb flattened device tree blob should be used. Includes fix by Thierry Reding to no longer use gic_handle_irq() Includes fixes by Guennadi Liakhovetski for recent pinmux changes. Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-11-21 16:34:25 +01:00
};
ARM: shmobile: kzm9g-reference: add AS3711 and CPUFreq DT bindings This adds DT bindings for an AS3711 PMIC, used for supplying power to the CPU, some peripherals and the backlight, as well as extends the cpu0 DT node with OPPs and a reference to the PMIC to support the CPUFreq and CPU DVFS functions. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-05 12:00:37 +02:00
&i2c0 {
as3711@40 {
compatible = "ams,as3711";
reg = <0x40>;
regulators {
vdd_dvfs: sd1 {
regulator-name = "1.315V CPU";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
};
sd2 {
regulator-name = "1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
sd4 {
regulator-name = "1.215V";
regulator-min-microvolt = <1215000>;
regulator-max-microvolt = <1235000>;
regulator-always-on;
regulator-boot-on;
};
ldo2 {
regulator-name = "2.8V CPU";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
regulator-boot-on;
};
ldo3 {
regulator-name = "3.0V CPU";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
regulator-boot-on;
};
ldo4 {
regulator-name = "2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
regulator-boot-on;
};
ldo5 {
regulator-name = "2.8V #2";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
regulator-boot-on;
};
ldo7 {
regulator-name = "1.15V CPU";
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1150000>;
regulator-always-on;
regulator-boot-on;
};
ldo8 {
regulator-name = "1.15V CPU #2";
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1150000>;
regulator-always-on;
regulator-boot-on;
};
};
};
};
ARM: shmobile: kzm9g: Reference DT implementation Provide alternate board code for the kzm9g to demonstrate how DT may be used given the current state of driver device tree support. This is intended to act as a reference for mach-shmobile developers. Some notes: * Brings up the GIC interrupt handler using device tree * Brings up the following device using device tree: - MMCIF (MMC) * Does not bring up the INTC interrupt controller at all, thus external devices may not be used. In particular, the SMSC ethernet device may not be used and thus NFS root may not be used. * Uses existing C code and not device tree to initialise the following, which are needed for a working board: - SCIF (Serial) - CMT (Clock) - PFC (GPIO) To use this alternate board code instead of the normal board code, CONFIG_MACH_KZM9G_REFERENCE should be selected in the kernel config. And the sh73a0-kzm9g-reference.dtb flattened device tree blob should be used. Includes fix by Thierry Reding to no longer use gic_handle_irq() Includes fixes by Guennadi Liakhovetski for recent pinmux changes. Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-11-21 16:34:25 +01:00
&mmcif {
ARM: shmobile: SDHI and MMCIF interfaces to kzm9g-reference Add SDHI0 and SDHI2 interfaces to kzm9g-reference. With no pinctrl DT support we cannot use GPIO card-detection and regulator switching. Also update the MMCIF DT node to use all 8 data lines and avoid redundant information in DT. Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> [ horms+renesas@verge.net.au: Updated for pinmux changes by Laurent Pinchart ] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-02-08 19:38:27 +01:00
bus-width = <8>;
vmmc-supply = <&reg_1p8v>;
ARM: shmobile: sh73a0: move SDHI and MMCIF DT nodes to sh73a0.dtsi To avoid having to repeat common DT node properties in all .dts files move them to SoC's .dtsi file, setting their status to "disabled." Individual boards will pick up devices, that they want to use and change their DT node status to enabled. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-19 13:47:43 +01:00
status = "okay";
};
&sdhi0 {
vmmc-supply = <&reg_3p3v>;
bus-width = <4>;
status = "okay";
};
&sdhi2 {
vmmc-supply = <&reg_3p3v>;
bus-width = <4>;
broken-cd;
status = "okay";
ARM: shmobile: kzm9g: Reference DT implementation Provide alternate board code for the kzm9g to demonstrate how DT may be used given the current state of driver device tree support. This is intended to act as a reference for mach-shmobile developers. Some notes: * Brings up the GIC interrupt handler using device tree * Brings up the following device using device tree: - MMCIF (MMC) * Does not bring up the INTC interrupt controller at all, thus external devices may not be used. In particular, the SMSC ethernet device may not be used and thus NFS root may not be used. * Uses existing C code and not device tree to initialise the following, which are needed for a working board: - SCIF (Serial) - CMT (Clock) - PFC (GPIO) To use this alternate board code instead of the normal board code, CONFIG_MACH_KZM9G_REFERENCE should be selected in the kernel config. And the sh73a0-kzm9g-reference.dtb flattened device tree blob should be used. Includes fix by Thierry Reding to no longer use gic_handle_irq() Includes fixes by Guennadi Liakhovetski for recent pinmux changes. Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-11-21 16:34:25 +01:00
};
Reference in New Issue Copy Permalink