linux/net/mac80211/status.c

390 lines
12 KiB
C
Raw Normal View History

/*
* Copyright 2002-2005, Instant802 Networks, Inc.
* Copyright 2005-2006, Devicescape Software, Inc.
* Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
* Copyright 2008-2009 Johannes Berg <johannes@sipsolutions.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <net/mac80211.h>
#include "ieee80211_i.h"
#include "rate.h"
#include "mesh.h"
#include "led.h"
void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw,
struct sk_buff *skb)
{
struct ieee80211_local *local = hw_to_local(hw);
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
int tmp;
skb->pkt_type = IEEE80211_TX_STATUS_MSG;
skb_queue_tail(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS ?
&local->skb_queue : &local->skb_queue_unreliable, skb);
tmp = skb_queue_len(&local->skb_queue) +
skb_queue_len(&local->skb_queue_unreliable);
while (tmp > IEEE80211_IRQSAFE_QUEUE_LIMIT &&
(skb = skb_dequeue(&local->skb_queue_unreliable))) {
dev_kfree_skb_irq(skb);
tmp--;
I802_DEBUG_INC(local->tx_status_drop);
}
tasklet_schedule(&local->tasklet);
}
EXPORT_SYMBOL(ieee80211_tx_status_irqsafe);
static void ieee80211_handle_filtered_frame(struct ieee80211_local *local,
struct sta_info *sta,
struct sk_buff *skb)
{
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
/*
* XXX: This is temporary!
*
* The problem here is that when we get here, the driver will
* quite likely have pretty much overwritten info->control by
* using info->driver_data or info->rate_driver_data. Thus,
* when passing out the frame to the driver again, we would be
* passing completely bogus data since the driver would then
* expect a properly filled info->control. In mac80211 itself
* the same problem occurs, since we need info->control.vif
* internally.
*
* To fix this, we should send the frame through TX processing
* again. However, it's not that simple, since the frame will
* have been software-encrypted (if applicable) already, and
* encrypting it again doesn't do much good. So to properly do
* that, we not only have to skip the actual 'raw' encryption
* (key selection etc. still has to be done!) but also the
* sequence number assignment since that impacts the crypto
* encapsulation, of course.
*
* Hence, for now, fix the bug by just dropping the frame.
*/
goto drop;
/*
* This skb 'survived' a round-trip through the driver, and
* hopefully the driver didn't mangle it too badly. However,
* we can definitely not rely on the the control information
* being correct. Clear it so we don't get junk there.
*/
memset(&info->control, 0, sizeof(info->control));
sta->tx_filtered_count++;
/*
* Clear the TX filter mask for this STA when sending the next
* packet. If the STA went to power save mode, this will happen
* when it wakes up for the next time.
*/
set_sta_flags(sta, WLAN_STA_CLEAR_PS_FILT);
/*
* This code races in the following way:
*
* (1) STA sends frame indicating it will go to sleep and does so
* (2) hardware/firmware adds STA to filter list, passes frame up
* (3) hardware/firmware processes TX fifo and suppresses a frame
* (4) we get TX status before having processed the frame and
* knowing that the STA has gone to sleep.
*
* This is actually quite unlikely even when both those events are
* processed from interrupts coming in quickly after one another or
* even at the same time because we queue both TX status events and
* RX frames to be processed by a tasklet and process them in the
* same order that they were received or TX status last. Hence, there
* is no race as long as the frame RX is processed before the next TX
* status, which drivers can ensure, see below.
*
* Note that this can only happen if the hardware or firmware can
* actually add STAs to the filter list, if this is done by the
* driver in response to set_tim() (which will only reduce the race
* this whole filtering tries to solve, not completely solve it)
* this situation cannot happen.
*
* To completely solve this race drivers need to make sure that they
* (a) don't mix the irq-safe/not irq-safe TX status/RX processing
* functions and
* (b) always process RX events before TX status events if ordering
* can be unknown, for example with different interrupt status
* bits.
*/
if (test_sta_flags(sta, WLAN_STA_PS_STA) &&
skb_queue_len(&sta->tx_filtered) < STA_MAX_TX_BUFFER) {
skb_queue_tail(&sta->tx_filtered, skb);
return;
}
if (!test_sta_flags(sta, WLAN_STA_PS_STA) &&
!(info->flags & IEEE80211_TX_INTFL_RETRIED)) {
/* Software retry the packet once */
info->flags |= IEEE80211_TX_INTFL_RETRIED;
ieee80211_add_pending_skb(local, skb);
return;
}
drop:
#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
if (net_ratelimit())
printk(KERN_DEBUG "%s: dropped TX filtered frame, "
"queue_len=%d PS=%d @%lu\n",
wiphy_name(local->hw.wiphy),
skb_queue_len(&sta->tx_filtered),
!!test_sta_flags(sta, WLAN_STA_PS_STA), jiffies);
#endif
dev_kfree_skb(skb);
}
static void ieee80211_frame_acked(struct sta_info *sta, struct sk_buff *skb)
{
struct ieee80211_mgmt *mgmt = (void *) skb->data;
struct ieee80211_local *local = sta->local;
struct ieee80211_sub_if_data *sdata = sta->sdata;
if (ieee80211_is_action(mgmt->frame_control) &&
sdata->vif.type == NL80211_IFTYPE_STATION &&
mgmt->u.action.category == WLAN_CATEGORY_HT &&
mgmt->u.action.u.ht_smps.action == WLAN_HT_ACTION_SMPS) {
/*
* This update looks racy, but isn't -- if we come
* here we've definitely got a station that we're
* talking to, and on a managed interface that can
* only be the AP. And the only other place updating
* this variable is before we're associated.
*/
switch (mgmt->u.action.u.ht_smps.smps_control) {
case WLAN_HT_SMPS_CONTROL_DYNAMIC:
sta->sdata->u.mgd.ap_smps = IEEE80211_SMPS_DYNAMIC;
break;
case WLAN_HT_SMPS_CONTROL_STATIC:
sta->sdata->u.mgd.ap_smps = IEEE80211_SMPS_STATIC;
break;
case WLAN_HT_SMPS_CONTROL_DISABLED:
default: /* shouldn't happen since we don't send that */
sta->sdata->u.mgd.ap_smps = IEEE80211_SMPS_OFF;
break;
}
ieee80211_queue_work(&local->hw, &local->recalc_smps);
}
}
void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb)
{
struct sk_buff *skb2;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
struct ieee80211_local *local = hw_to_local(hw);
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
u16 frag, type;
__le16 fc;
struct ieee80211_supported_band *sband;
struct ieee80211_tx_status_rtap_hdr *rthdr;
struct ieee80211_sub_if_data *sdata;
struct net_device *prev_dev = NULL;
struct sta_info *sta, *tmp;
int retry_count = -1, i;
bool injected;
for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) {
/* the HW cannot have attempted that rate */
if (i >= hw->max_rates) {
info->status.rates[i].idx = -1;
info->status.rates[i].count = 0;
}
retry_count += info->status.rates[i].count;
}
if (retry_count < 0)
retry_count = 0;
rcu_read_lock();
sband = local->hw.wiphy->bands[info->band];
for_each_sta_info(local, hdr->addr1, sta, tmp) {
/* skip wrong virtual interface */
if (memcmp(hdr->addr2, sta->sdata->vif.addr, ETH_ALEN))
continue;
if (!(info->flags & IEEE80211_TX_STAT_ACK) &&
test_sta_flags(sta, WLAN_STA_PS_STA)) {
/*
* The STA is in power save mode, so assume
* that this TX packet failed because of that.
*/
ieee80211_handle_filtered_frame(local, sta, skb);
rcu_read_unlock();
return;
}
fc = hdr->frame_control;
if ((info->flags & IEEE80211_TX_STAT_AMPDU_NO_BACK) &&
(ieee80211_is_data_qos(fc))) {
u16 tid, ssn;
u8 *qc;
qc = ieee80211_get_qos_ctl(hdr);
tid = qc[0] & 0xf;
ssn = ((le16_to_cpu(hdr->seq_ctrl) + 0x10)
& IEEE80211_SCTL_SEQ);
ieee80211_send_bar(sta->sdata, hdr->addr1,
tid, ssn);
}
if (info->flags & IEEE80211_TX_STAT_TX_FILTERED) {
ieee80211_handle_filtered_frame(local, sta, skb);
rcu_read_unlock();
return;
} else {
if (!(info->flags & IEEE80211_TX_STAT_ACK))
sta->tx_retry_failed++;
sta->tx_retry_count += retry_count;
}
rate_control_tx_status(local, sband, sta, skb);
if (ieee80211_vif_is_mesh(&sta->sdata->vif))
ieee80211s_update_metric(local, sta, skb);
if (!(info->flags & IEEE80211_TX_CTL_INJECTED) &&
(info->flags & IEEE80211_TX_STAT_ACK))
ieee80211_frame_acked(sta, skb);
}
rcu_read_unlock();
ieee80211_led_tx(local, 0);
/* SNMP counters
* Fragments are passed to low-level drivers as separate skbs, so these
* are actually fragments, not frames. Update frame counters only for
* the first fragment of the frame. */
frag = le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG;
type = le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_FTYPE;
if (info->flags & IEEE80211_TX_STAT_ACK) {
if (frag == 0) {
local->dot11TransmittedFrameCount++;
if (is_multicast_ether_addr(hdr->addr1))
local->dot11MulticastTransmittedFrameCount++;
if (retry_count > 0)
local->dot11RetryCount++;
if (retry_count > 1)
local->dot11MultipleRetryCount++;
}
/* This counter shall be incremented for an acknowledged MPDU
* with an individual address in the address 1 field or an MPDU
* with a multicast address in the address 1 field of type Data
* or Management. */
if (!is_multicast_ether_addr(hdr->addr1) ||
type == IEEE80211_FTYPE_DATA ||
type == IEEE80211_FTYPE_MGMT)
local->dot11TransmittedFragmentCount++;
} else {
if (frag == 0)
local->dot11FailedCount++;
}
/* this was a transmitted frame, but now we want to reuse it */
skb_orphan(skb);
/*
* This is a bit racy but we can avoid a lot of work
* with this test...
*/
if (!local->monitors && !local->cooked_mntrs) {
dev_kfree_skb(skb);
return;
}
/* send frame to monitor interfaces now */
if (skb_headroom(skb) < sizeof(*rthdr)) {
printk(KERN_ERR "ieee80211_tx_status: headroom too small\n");
dev_kfree_skb(skb);
return;
}
rthdr = (struct ieee80211_tx_status_rtap_hdr *)
skb_push(skb, sizeof(*rthdr));
memset(rthdr, 0, sizeof(*rthdr));
rthdr->hdr.it_len = cpu_to_le16(sizeof(*rthdr));
rthdr->hdr.it_present =
cpu_to_le32((1 << IEEE80211_RADIOTAP_TX_FLAGS) |
(1 << IEEE80211_RADIOTAP_DATA_RETRIES) |
(1 << IEEE80211_RADIOTAP_RATE));
if (!(info->flags & IEEE80211_TX_STAT_ACK) &&
!is_multicast_ether_addr(hdr->addr1))
rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_FAIL);
/*
* XXX: Once radiotap gets the bitmap reset thing the vendor
* extensions proposal contains, we can actually report
* the whole set of tries we did.
*/
if ((info->status.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) ||
(info->status.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT))
rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_CTS);
else if (info->status.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS)
rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_RTS);
if (info->status.rates[0].idx >= 0 &&
!(info->status.rates[0].flags & IEEE80211_TX_RC_MCS))
rthdr->rate = sband->bitrates[
info->status.rates[0].idx].bitrate / 5;
/* for now report the total retry_count */
rthdr->data_retries = retry_count;
/* Need to make a copy before skb->cb gets cleared */
injected = !!(info->flags & IEEE80211_TX_CTL_INJECTED);
/* XXX: is this sufficient for BPF? */
skb_set_mac_header(skb, 0);
skb->ip_summed = CHECKSUM_UNNECESSARY;
skb->pkt_type = PACKET_OTHERHOST;
skb->protocol = htons(ETH_P_802_2);
memset(skb->cb, 0, sizeof(skb->cb));
rcu_read_lock();
list_for_each_entry_rcu(sdata, &local->interfaces, list) {
if (sdata->vif.type == NL80211_IFTYPE_MONITOR) {
if (!ieee80211_sdata_running(sdata))
continue;
if ((sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) &&
!injected &&
(type == IEEE80211_FTYPE_DATA))
continue;
if (prev_dev) {
skb2 = skb_clone(skb, GFP_ATOMIC);
if (skb2) {
skb2->dev = prev_dev;
netif_rx(skb2);
}
}
prev_dev = sdata->dev;
}
}
if (prev_dev) {
skb->dev = prev_dev;
netif_rx(skb);
skb = NULL;
}
rcu_read_unlock();
dev_kfree_skb(skb);
}
EXPORT_SYMBOL(ieee80211_tx_status);