2007-02-17 02:40:22 +01:00
|
|
|
/*
|
|
|
|
* Support for IDE interfaces on Celleb platform
|
|
|
|
*
|
|
|
|
* (C) Copyright 2006 TOSHIBA CORPORATION
|
|
|
|
*
|
|
|
|
* This code is based on drivers/ide/pci/siimage.c:
|
|
|
|
* Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org>
|
|
|
|
* Copyright (C) 2003 Red Hat <alan@redhat.com>
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
|
|
* (at your option) any later version.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public License along
|
|
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
|
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/types.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/pci.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/hdreg.h>
|
|
|
|
#include <linux/ide.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
|
|
|
|
#define PCI_DEVICE_ID_TOSHIBA_SCC_ATA 0x01b4
|
|
|
|
|
|
|
|
#define SCC_PATA_NAME "scc IDE"
|
|
|
|
|
|
|
|
#define TDVHSEL_MASTER 0x00000001
|
|
|
|
#define TDVHSEL_SLAVE 0x00000004
|
|
|
|
|
|
|
|
#define MODE_JCUSFEN 0x00000080
|
|
|
|
|
|
|
|
#define CCKCTRL_ATARESET 0x00040000
|
|
|
|
#define CCKCTRL_BUFCNT 0x00020000
|
|
|
|
#define CCKCTRL_CRST 0x00010000
|
|
|
|
#define CCKCTRL_OCLKEN 0x00000100
|
|
|
|
#define CCKCTRL_ATACLKOEN 0x00000002
|
|
|
|
#define CCKCTRL_LCLKEN 0x00000001
|
|
|
|
|
|
|
|
#define QCHCD_IOS_SS 0x00000001
|
|
|
|
|
|
|
|
#define QCHSD_STPDIAG 0x00020000
|
|
|
|
|
|
|
|
#define INTMASK_MSK 0xD1000012
|
|
|
|
#define INTSTS_SERROR 0x80000000
|
|
|
|
#define INTSTS_PRERR 0x40000000
|
|
|
|
#define INTSTS_RERR 0x10000000
|
|
|
|
#define INTSTS_ICERR 0x01000000
|
|
|
|
#define INTSTS_BMSINT 0x00000010
|
|
|
|
#define INTSTS_BMHE 0x00000008
|
|
|
|
#define INTSTS_IOIRQS 0x00000004
|
|
|
|
#define INTSTS_INTRQ 0x00000002
|
|
|
|
#define INTSTS_ACTEINT 0x00000001
|
|
|
|
|
|
|
|
#define ECMODE_VALUE 0x01
|
|
|
|
|
|
|
|
static struct scc_ports {
|
|
|
|
unsigned long ctl, dma;
|
|
|
|
unsigned char hwif_id; /* for removing hwif from system */
|
|
|
|
} scc_ports[MAX_HWIFS];
|
|
|
|
|
|
|
|
/* PIO transfer mode table */
|
|
|
|
/* JCHST */
|
|
|
|
static unsigned long JCHSTtbl[2][7] = {
|
|
|
|
{0x0E, 0x05, 0x02, 0x03, 0x02, 0x00, 0x00}, /* 100MHz */
|
|
|
|
{0x13, 0x07, 0x04, 0x04, 0x03, 0x00, 0x00} /* 133MHz */
|
|
|
|
};
|
|
|
|
|
|
|
|
/* JCHHT */
|
|
|
|
static unsigned long JCHHTtbl[2][7] = {
|
|
|
|
{0x0E, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00}, /* 100MHz */
|
|
|
|
{0x13, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00} /* 133MHz */
|
|
|
|
};
|
|
|
|
|
|
|
|
/* JCHCT */
|
|
|
|
static unsigned long JCHCTtbl[2][7] = {
|
|
|
|
{0x1D, 0x1D, 0x1C, 0x0B, 0x06, 0x00, 0x00}, /* 100MHz */
|
|
|
|
{0x27, 0x26, 0x26, 0x0E, 0x09, 0x00, 0x00} /* 133MHz */
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
/* DMA transfer mode table */
|
|
|
|
/* JCHDCTM/JCHDCTS */
|
|
|
|
static unsigned long JCHDCTxtbl[2][7] = {
|
|
|
|
{0x0A, 0x06, 0x04, 0x03, 0x01, 0x00, 0x00}, /* 100MHz */
|
|
|
|
{0x0E, 0x09, 0x06, 0x04, 0x02, 0x01, 0x00} /* 133MHz */
|
|
|
|
};
|
|
|
|
|
|
|
|
/* JCSTWTM/JCSTWTS */
|
|
|
|
static unsigned long JCSTWTxtbl[2][7] = {
|
|
|
|
{0x06, 0x04, 0x03, 0x02, 0x02, 0x02, 0x00}, /* 100MHz */
|
|
|
|
{0x09, 0x06, 0x04, 0x02, 0x02, 0x02, 0x02} /* 133MHz */
|
|
|
|
};
|
|
|
|
|
|
|
|
/* JCTSS */
|
|
|
|
static unsigned long JCTSStbl[2][7] = {
|
|
|
|
{0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x00}, /* 100MHz */
|
|
|
|
{0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05} /* 133MHz */
|
|
|
|
};
|
|
|
|
|
|
|
|
/* JCENVT */
|
|
|
|
static unsigned long JCENVTtbl[2][7] = {
|
|
|
|
{0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00}, /* 100MHz */
|
|
|
|
{0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02} /* 133MHz */
|
|
|
|
};
|
|
|
|
|
|
|
|
/* JCACTSELS/JCACTSELM */
|
|
|
|
static unsigned long JCACTSELtbl[2][7] = {
|
|
|
|
{0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00}, /* 100MHz */
|
|
|
|
{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01} /* 133MHz */
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
static u8 scc_ide_inb(unsigned long port)
|
|
|
|
{
|
|
|
|
u32 data = in_be32((void*)port);
|
|
|
|
return (u8)data;
|
|
|
|
}
|
|
|
|
|
|
|
|
static u16 scc_ide_inw(unsigned long port)
|
|
|
|
{
|
|
|
|
u32 data = in_be32((void*)port);
|
|
|
|
return (u16)data;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void scc_ide_insw(unsigned long port, void *addr, u32 count)
|
|
|
|
{
|
|
|
|
u16 *ptr = (u16 *)addr;
|
|
|
|
while (count--) {
|
|
|
|
*ptr++ = le16_to_cpu(in_be32((void*)port));
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void scc_ide_insl(unsigned long port, void *addr, u32 count)
|
|
|
|
{
|
|
|
|
u16 *ptr = (u16 *)addr;
|
|
|
|
while (count--) {
|
|
|
|
*ptr++ = le16_to_cpu(in_be32((void*)port));
|
|
|
|
*ptr++ = le16_to_cpu(in_be32((void*)port));
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void scc_ide_outb(u8 addr, unsigned long port)
|
|
|
|
{
|
|
|
|
out_be32((void*)port, addr);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void scc_ide_outw(u16 addr, unsigned long port)
|
|
|
|
{
|
|
|
|
out_be32((void*)port, addr);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
scc_ide_outbsync(ide_drive_t * drive, u8 addr, unsigned long port)
|
|
|
|
{
|
|
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
|
|
|
|
|
|
out_be32((void*)port, addr);
|
|
|
|
__asm__ __volatile__("eieio":::"memory");
|
|
|
|
in_be32((void*)(hwif->dma_base + 0x01c));
|
|
|
|
__asm__ __volatile__("eieio":::"memory");
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
scc_ide_outsw(unsigned long port, void *addr, u32 count)
|
|
|
|
{
|
|
|
|
u16 *ptr = (u16 *)addr;
|
|
|
|
while (count--) {
|
|
|
|
out_be32((void*)port, cpu_to_le16(*ptr++));
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
scc_ide_outsl(unsigned long port, void *addr, u32 count)
|
|
|
|
{
|
|
|
|
u16 *ptr = (u16 *)addr;
|
|
|
|
while (count--) {
|
|
|
|
out_be32((void*)port, cpu_to_le16(*ptr++));
|
|
|
|
out_be32((void*)port, cpu_to_le16(*ptr++));
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* scc_ratemask - Compute available modes
|
|
|
|
* @drive: IDE drive
|
|
|
|
*
|
|
|
|
* Compute the available speeds for the devices on the interface.
|
|
|
|
* Enforce UDMA33 as a limit if there is no 80pin cable present.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static u8 scc_ratemask(ide_drive_t *drive)
|
|
|
|
{
|
|
|
|
u8 mode = 4;
|
|
|
|
|
|
|
|
if (!eighty_ninty_three(drive))
|
|
|
|
mode = min(mode, (u8)1);
|
|
|
|
return mode;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* scc_tuneproc - tune a drive PIO mode
|
|
|
|
* @drive: drive to tune
|
|
|
|
* @mode_wanted: the target operating mode
|
|
|
|
*
|
|
|
|
* Load the timing settings for this device mode into the
|
|
|
|
* controller.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static void scc_tuneproc(ide_drive_t *drive, byte mode_wanted)
|
|
|
|
{
|
|
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
|
|
struct scc_ports *ports = ide_get_hwifdata(hwif);
|
|
|
|
unsigned long ctl_base = ports->ctl;
|
|
|
|
unsigned long cckctrl_port = ctl_base + 0xff0;
|
|
|
|
unsigned long piosht_port = ctl_base + 0x000;
|
|
|
|
unsigned long pioct_port = ctl_base + 0x004;
|
|
|
|
unsigned long reg;
|
|
|
|
unsigned char speed = XFER_PIO_0;
|
|
|
|
int offset;
|
|
|
|
|
|
|
|
mode_wanted = ide_get_best_pio_mode(drive, mode_wanted, 4, NULL);
|
|
|
|
switch (mode_wanted) {
|
|
|
|
case 4:
|
|
|
|
speed = XFER_PIO_4;
|
|
|
|
break;
|
|
|
|
case 3:
|
|
|
|
speed = XFER_PIO_3;
|
|
|
|
break;
|
|
|
|
case 2:
|
|
|
|
speed = XFER_PIO_2;
|
|
|
|
break;
|
|
|
|
case 1:
|
|
|
|
speed = XFER_PIO_1;
|
|
|
|
break;
|
|
|
|
case 0:
|
|
|
|
default:
|
|
|
|
speed = XFER_PIO_0;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
2007-02-17 02:40:25 +01:00
|
|
|
reg = in_be32((void __iomem *)cckctrl_port);
|
2007-02-17 02:40:22 +01:00
|
|
|
if (reg & CCKCTRL_ATACLKOEN) {
|
|
|
|
offset = 1; /* 133MHz */
|
|
|
|
} else {
|
|
|
|
offset = 0; /* 100MHz */
|
|
|
|
}
|
|
|
|
reg = JCHSTtbl[offset][mode_wanted] << 16 | JCHHTtbl[offset][mode_wanted];
|
2007-02-17 02:40:25 +01:00
|
|
|
out_be32((void __iomem *)piosht_port, reg);
|
2007-02-17 02:40:22 +01:00
|
|
|
reg = JCHCTtbl[offset][mode_wanted];
|
2007-02-17 02:40:25 +01:00
|
|
|
out_be32((void __iomem *)pioct_port, reg);
|
2007-02-17 02:40:22 +01:00
|
|
|
|
|
|
|
ide_config_drive_speed(drive, speed);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* scc_tune_chipset - tune a drive DMA mode
|
|
|
|
* @drive: Drive to set up
|
|
|
|
* @xferspeed: speed we want to achieve
|
|
|
|
*
|
|
|
|
* Load the timing settings for this device mode into the
|
|
|
|
* controller.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static int scc_tune_chipset(ide_drive_t *drive, byte xferspeed)
|
|
|
|
{
|
|
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
|
|
u8 speed = ide_rate_filter(scc_ratemask(drive), xferspeed);
|
|
|
|
struct scc_ports *ports = ide_get_hwifdata(hwif);
|
|
|
|
unsigned long ctl_base = ports->ctl;
|
|
|
|
unsigned long cckctrl_port = ctl_base + 0xff0;
|
|
|
|
unsigned long mdmact_port = ctl_base + 0x008;
|
|
|
|
unsigned long mcrcst_port = ctl_base + 0x00c;
|
|
|
|
unsigned long sdmact_port = ctl_base + 0x010;
|
|
|
|
unsigned long scrcst_port = ctl_base + 0x014;
|
|
|
|
unsigned long udenvt_port = ctl_base + 0x018;
|
|
|
|
unsigned long tdvhsel_port = ctl_base + 0x020;
|
|
|
|
int is_slave = (&hwif->drives[1] == drive);
|
|
|
|
int offset, idx;
|
|
|
|
unsigned long reg;
|
|
|
|
unsigned long jcactsel;
|
|
|
|
|
2007-02-17 02:40:25 +01:00
|
|
|
reg = in_be32((void __iomem *)cckctrl_port);
|
2007-02-17 02:40:22 +01:00
|
|
|
if (reg & CCKCTRL_ATACLKOEN) {
|
|
|
|
offset = 1; /* 133MHz */
|
|
|
|
} else {
|
|
|
|
offset = 0; /* 100MHz */
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (speed) {
|
|
|
|
case XFER_UDMA_6:
|
|
|
|
idx = 6;
|
|
|
|
break;
|
|
|
|
case XFER_UDMA_5:
|
|
|
|
idx = 5;
|
|
|
|
break;
|
|
|
|
case XFER_UDMA_4:
|
|
|
|
idx = 4;
|
|
|
|
break;
|
|
|
|
case XFER_UDMA_3:
|
|
|
|
idx = 3;
|
|
|
|
break;
|
|
|
|
case XFER_UDMA_2:
|
|
|
|
idx = 2;
|
|
|
|
break;
|
|
|
|
case XFER_UDMA_1:
|
|
|
|
idx = 1;
|
|
|
|
break;
|
|
|
|
case XFER_UDMA_0:
|
|
|
|
idx = 0;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
jcactsel = JCACTSELtbl[offset][idx];
|
|
|
|
if (is_slave) {
|
2007-02-17 02:40:25 +01:00
|
|
|
out_be32((void __iomem *)sdmact_port, JCHDCTxtbl[offset][idx]);
|
|
|
|
out_be32((void __iomem *)scrcst_port, JCSTWTxtbl[offset][idx]);
|
|
|
|
jcactsel = jcactsel << 2;
|
|
|
|
out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_SLAVE) | jcactsel);
|
2007-02-17 02:40:22 +01:00
|
|
|
} else {
|
2007-02-17 02:40:25 +01:00
|
|
|
out_be32((void __iomem *)mdmact_port, JCHDCTxtbl[offset][idx]);
|
|
|
|
out_be32((void __iomem *)mcrcst_port, JCSTWTxtbl[offset][idx]);
|
|
|
|
out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_MASTER) | jcactsel);
|
2007-02-17 02:40:22 +01:00
|
|
|
}
|
|
|
|
reg = JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx];
|
2007-02-17 02:40:25 +01:00
|
|
|
out_be32((void __iomem *)udenvt_port, reg);
|
2007-02-17 02:40:22 +01:00
|
|
|
|
|
|
|
return ide_config_drive_speed(drive, speed);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* scc_config_chipset_for_dma - configure for DMA
|
|
|
|
* @drive: drive to configure
|
|
|
|
*
|
|
|
|
* Called by scc_config_drive_for_dma().
|
|
|
|
*/
|
|
|
|
|
|
|
|
static int scc_config_chipset_for_dma(ide_drive_t *drive)
|
|
|
|
{
|
|
|
|
u8 speed = ide_dma_speed(drive, scc_ratemask(drive));
|
|
|
|
|
|
|
|
if (!speed)
|
|
|
|
return 0;
|
|
|
|
|
2007-02-17 02:40:24 +01:00
|
|
|
if (scc_tune_chipset(drive, speed))
|
2007-02-17 02:40:22 +01:00
|
|
|
return 0;
|
|
|
|
|
|
|
|
return ide_dma_enable(drive);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* scc_configure_drive_for_dma - set up for DMA transfers
|
|
|
|
* @drive: drive we are going to set up
|
|
|
|
*
|
|
|
|
* Set up the drive for DMA, tune the controller and drive as
|
|
|
|
* required.
|
|
|
|
* If the drive isn't suitable for DMA or we hit other problems
|
|
|
|
* then we will drop down to PIO and set up PIO appropriately.
|
|
|
|
* (return 1)
|
|
|
|
*/
|
|
|
|
|
|
|
|
static int scc_config_drive_for_dma(ide_drive_t *drive)
|
|
|
|
{
|
2007-02-17 02:40:25 +01:00
|
|
|
if (ide_use_dma(drive) && scc_config_chipset_for_dma(drive))
|
2007-02-17 02:40:26 +01:00
|
|
|
return 0;
|
2007-02-17 02:40:25 +01:00
|
|
|
|
2007-02-17 02:40:25 +01:00
|
|
|
if (ide_use_fast_pio(drive))
|
2007-02-17 02:40:26 +01:00
|
|
|
scc_tuneproc(drive, 4);
|
2007-02-17 02:40:25 +01:00
|
|
|
|
2007-02-17 02:40:26 +01:00
|
|
|
return -1;
|
2007-02-17 02:40:22 +01:00
|
|
|
}
|
|
|
|
|
2007-02-17 02:40:25 +01:00
|
|
|
/**
|
|
|
|
* scc_ide_dma_setup - begin a DMA phase
|
|
|
|
* @drive: target device
|
|
|
|
*
|
|
|
|
* Build an IDE DMA PRD (IDE speak for scatter gather table)
|
|
|
|
* and then set up the DMA transfer registers.
|
|
|
|
*
|
|
|
|
* Returns 0 on success. If a PIO fallback is required then 1
|
|
|
|
* is returned.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static int scc_dma_setup(ide_drive_t *drive)
|
|
|
|
{
|
|
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
|
|
struct request *rq = HWGROUP(drive)->rq;
|
|
|
|
unsigned int reading;
|
|
|
|
u8 dma_stat;
|
|
|
|
|
|
|
|
if (rq_data_dir(rq))
|
|
|
|
reading = 0;
|
|
|
|
else
|
|
|
|
reading = 1 << 3;
|
|
|
|
|
|
|
|
/* fall back to pio! */
|
|
|
|
if (!ide_build_dmatable(drive, rq)) {
|
|
|
|
ide_map_sg(drive, rq);
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* PRD table */
|
|
|
|
out_be32((void __iomem *)hwif->dma_prdtable, hwif->dmatable_dma);
|
|
|
|
|
|
|
|
/* specify r/w */
|
|
|
|
out_be32((void __iomem *)hwif->dma_command, reading);
|
|
|
|
|
|
|
|
/* read dma_status for INTR & ERROR flags */
|
|
|
|
dma_stat = in_be32((void __iomem *)hwif->dma_status);
|
|
|
|
|
|
|
|
/* clear INTR & ERROR flags */
|
|
|
|
out_be32((void __iomem *)hwif->dma_status, dma_stat|6);
|
|
|
|
drive->waiting_for_dma = 1;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
2007-02-17 02:40:22 +01:00
|
|
|
/**
|
|
|
|
* scc_ide_dma_end - Stop DMA
|
|
|
|
* @drive: IDE drive
|
|
|
|
*
|
|
|
|
* Check and clear INT Status register.
|
|
|
|
* Then call __ide_dma_end().
|
|
|
|
*/
|
|
|
|
|
|
|
|
static int scc_ide_dma_end(ide_drive_t * drive)
|
|
|
|
{
|
|
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
|
|
unsigned long intsts_port = hwif->dma_base + 0x014;
|
|
|
|
u32 reg;
|
|
|
|
|
|
|
|
while (1) {
|
2007-02-17 02:40:25 +01:00
|
|
|
reg = in_be32((void __iomem *)intsts_port);
|
2007-02-17 02:40:22 +01:00
|
|
|
|
|
|
|
if (reg & INTSTS_SERROR) {
|
|
|
|
printk(KERN_WARNING "%s: SERROR\n", SCC_PATA_NAME);
|
2007-02-17 02:40:25 +01:00
|
|
|
out_be32((void __iomem *)intsts_port, INTSTS_SERROR|INTSTS_BMSINT);
|
2007-02-17 02:40:22 +01:00
|
|
|
|
2007-02-17 02:40:25 +01:00
|
|
|
out_be32((void __iomem *)hwif->dma_command, in_be32((void __iomem *)hwif->dma_command) & ~QCHCD_IOS_SS);
|
2007-02-17 02:40:22 +01:00
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (reg & INTSTS_PRERR) {
|
|
|
|
u32 maea0, maec0;
|
|
|
|
unsigned long ctl_base = hwif->config_data;
|
|
|
|
|
2007-02-17 02:40:25 +01:00
|
|
|
maea0 = in_be32((void __iomem *)(ctl_base + 0xF50));
|
|
|
|
maec0 = in_be32((void __iomem *)(ctl_base + 0xF54));
|
2007-02-17 02:40:22 +01:00
|
|
|
|
|
|
|
printk(KERN_WARNING "%s: PRERR [addr:%x cmd:%x]\n", SCC_PATA_NAME, maea0, maec0);
|
|
|
|
|
2007-02-17 02:40:25 +01:00
|
|
|
out_be32((void __iomem *)intsts_port, INTSTS_PRERR|INTSTS_BMSINT);
|
2007-02-17 02:40:22 +01:00
|
|
|
|
2007-02-17 02:40:25 +01:00
|
|
|
out_be32((void __iomem *)hwif->dma_command, in_be32((void __iomem *)hwif->dma_command) & ~QCHCD_IOS_SS);
|
2007-02-17 02:40:22 +01:00
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (reg & INTSTS_RERR) {
|
|
|
|
printk(KERN_WARNING "%s: Response Error\n", SCC_PATA_NAME);
|
2007-02-17 02:40:25 +01:00
|
|
|
out_be32((void __iomem *)intsts_port, INTSTS_RERR|INTSTS_BMSINT);
|
2007-02-17 02:40:22 +01:00
|
|
|
|
2007-02-17 02:40:25 +01:00
|
|
|
out_be32((void __iomem *)hwif->dma_command, in_be32((void __iomem *)hwif->dma_command) & ~QCHCD_IOS_SS);
|
2007-02-17 02:40:22 +01:00
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (reg & INTSTS_ICERR) {
|
2007-02-17 02:40:25 +01:00
|
|
|
out_be32((void __iomem *)hwif->dma_command, in_be32((void __iomem *)hwif->dma_command) & ~QCHCD_IOS_SS);
|
2007-02-17 02:40:22 +01:00
|
|
|
|
|
|
|
printk(KERN_WARNING "%s: Illegal Configuration\n", SCC_PATA_NAME);
|
2007-02-17 02:40:25 +01:00
|
|
|
out_be32((void __iomem *)intsts_port, INTSTS_ICERR|INTSTS_BMSINT);
|
2007-02-17 02:40:22 +01:00
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (reg & INTSTS_BMSINT) {
|
|
|
|
printk(KERN_WARNING "%s: Internal Bus Error\n", SCC_PATA_NAME);
|
2007-02-17 02:40:25 +01:00
|
|
|
out_be32((void __iomem *)intsts_port, INTSTS_BMSINT);
|
2007-02-17 02:40:22 +01:00
|
|
|
|
|
|
|
ide_do_reset(drive);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (reg & INTSTS_BMHE) {
|
2007-02-17 02:40:25 +01:00
|
|
|
out_be32((void __iomem *)intsts_port, INTSTS_BMHE);
|
2007-02-17 02:40:22 +01:00
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (reg & INTSTS_ACTEINT) {
|
2007-02-17 02:40:25 +01:00
|
|
|
out_be32((void __iomem *)intsts_port, INTSTS_ACTEINT);
|
2007-02-17 02:40:22 +01:00
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (reg & INTSTS_IOIRQS) {
|
2007-02-17 02:40:25 +01:00
|
|
|
out_be32((void __iomem *)intsts_port, INTSTS_IOIRQS);
|
2007-02-17 02:40:22 +01:00
|
|
|
continue;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
return __ide_dma_end(drive);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* setup_mmio_scc - map CTRL/BMID region
|
|
|
|
* @dev: PCI device we are configuring
|
|
|
|
* @name: device name
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
|
|
|
static int setup_mmio_scc (struct pci_dev *dev, const char *name)
|
|
|
|
{
|
|
|
|
unsigned long ctl_base = pci_resource_start(dev, 0);
|
|
|
|
unsigned long dma_base = pci_resource_start(dev, 1);
|
|
|
|
unsigned long ctl_size = pci_resource_len(dev, 0);
|
|
|
|
unsigned long dma_size = pci_resource_len(dev, 1);
|
|
|
|
void *ctl_addr;
|
|
|
|
void *dma_addr;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < MAX_HWIFS; i++) {
|
|
|
|
if (scc_ports[i].ctl == 0)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
if (i >= MAX_HWIFS)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
if (!request_mem_region(ctl_base, ctl_size, name)) {
|
|
|
|
printk(KERN_WARNING "%s: IDE controller MMIO ports not available.\n", SCC_PATA_NAME);
|
|
|
|
goto fail_0;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!request_mem_region(dma_base, dma_size, name)) {
|
|
|
|
printk(KERN_WARNING "%s: IDE controller MMIO ports not available.\n", SCC_PATA_NAME);
|
|
|
|
goto fail_1;
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((ctl_addr = ioremap(ctl_base, ctl_size)) == NULL)
|
|
|
|
goto fail_2;
|
|
|
|
|
|
|
|
if ((dma_addr = ioremap(dma_base, dma_size)) == NULL)
|
|
|
|
goto fail_3;
|
|
|
|
|
|
|
|
pci_set_master(dev);
|
|
|
|
scc_ports[i].ctl = (unsigned long)ctl_addr;
|
|
|
|
scc_ports[i].dma = (unsigned long)dma_addr;
|
|
|
|
pci_set_drvdata(dev, (void *) &scc_ports[i]);
|
|
|
|
|
|
|
|
return 1;
|
|
|
|
|
|
|
|
fail_3:
|
|
|
|
iounmap(ctl_addr);
|
|
|
|
fail_2:
|
|
|
|
release_mem_region(dma_base, dma_size);
|
|
|
|
fail_1:
|
|
|
|
release_mem_region(ctl_base, ctl_size);
|
|
|
|
fail_0:
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* init_setup_scc - set up an SCC PATA Controller
|
|
|
|
* @dev: PCI device
|
|
|
|
* @d: IDE PCI device
|
|
|
|
*
|
|
|
|
* Perform the initial set up for this device.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static int __devinit init_setup_scc(struct pci_dev *dev, ide_pci_device_t *d)
|
|
|
|
{
|
|
|
|
unsigned long ctl_base;
|
|
|
|
unsigned long dma_base;
|
|
|
|
unsigned long cckctrl_port;
|
|
|
|
unsigned long intmask_port;
|
|
|
|
unsigned long mode_port;
|
|
|
|
unsigned long ecmode_port;
|
|
|
|
unsigned long dma_status_port;
|
|
|
|
u32 reg = 0;
|
|
|
|
struct scc_ports *ports;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
rc = setup_mmio_scc(dev, d->name);
|
|
|
|
if (rc < 0) {
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
|
|
|
ports = pci_get_drvdata(dev);
|
|
|
|
ctl_base = ports->ctl;
|
|
|
|
dma_base = ports->dma;
|
|
|
|
cckctrl_port = ctl_base + 0xff0;
|
|
|
|
intmask_port = dma_base + 0x010;
|
|
|
|
mode_port = ctl_base + 0x024;
|
|
|
|
ecmode_port = ctl_base + 0xf00;
|
|
|
|
dma_status_port = dma_base + 0x004;
|
|
|
|
|
|
|
|
/* controller initialization */
|
|
|
|
reg = 0;
|
|
|
|
out_be32((void*)cckctrl_port, reg);
|
|
|
|
reg |= CCKCTRL_ATACLKOEN;
|
|
|
|
out_be32((void*)cckctrl_port, reg);
|
|
|
|
reg |= CCKCTRL_LCLKEN | CCKCTRL_OCLKEN;
|
|
|
|
out_be32((void*)cckctrl_port, reg);
|
|
|
|
reg |= CCKCTRL_CRST;
|
|
|
|
out_be32((void*)cckctrl_port, reg);
|
|
|
|
|
|
|
|
for (;;) {
|
|
|
|
reg = in_be32((void*)cckctrl_port);
|
|
|
|
if (reg & CCKCTRL_CRST)
|
|
|
|
break;
|
|
|
|
udelay(5000);
|
|
|
|
}
|
|
|
|
|
|
|
|
reg |= CCKCTRL_ATARESET;
|
|
|
|
out_be32((void*)cckctrl_port, reg);
|
|
|
|
|
|
|
|
out_be32((void*)ecmode_port, ECMODE_VALUE);
|
|
|
|
out_be32((void*)mode_port, MODE_JCUSFEN);
|
|
|
|
out_be32((void*)intmask_port, INTMASK_MSK);
|
|
|
|
|
|
|
|
return ide_setup_pci_device(dev, d);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* init_mmio_iops_scc - set up the iops for MMIO
|
|
|
|
* @hwif: interface to set up
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
|
|
|
static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif)
|
|
|
|
{
|
|
|
|
struct pci_dev *dev = hwif->pci_dev;
|
|
|
|
struct scc_ports *ports = pci_get_drvdata(dev);
|
|
|
|
unsigned long dma_base = ports->dma;
|
|
|
|
|
|
|
|
ide_set_hwifdata(hwif, ports);
|
|
|
|
|
|
|
|
hwif->INB = scc_ide_inb;
|
|
|
|
hwif->INW = scc_ide_inw;
|
|
|
|
hwif->INSW = scc_ide_insw;
|
|
|
|
hwif->INSL = scc_ide_insl;
|
|
|
|
hwif->OUTB = scc_ide_outb;
|
|
|
|
hwif->OUTBSYNC = scc_ide_outbsync;
|
|
|
|
hwif->OUTW = scc_ide_outw;
|
|
|
|
hwif->OUTSW = scc_ide_outsw;
|
|
|
|
hwif->OUTSL = scc_ide_outsl;
|
|
|
|
|
|
|
|
hwif->io_ports[IDE_DATA_OFFSET] = dma_base + 0x20;
|
|
|
|
hwif->io_ports[IDE_ERROR_OFFSET] = dma_base + 0x24;
|
|
|
|
hwif->io_ports[IDE_NSECTOR_OFFSET] = dma_base + 0x28;
|
|
|
|
hwif->io_ports[IDE_SECTOR_OFFSET] = dma_base + 0x2c;
|
|
|
|
hwif->io_ports[IDE_LCYL_OFFSET] = dma_base + 0x30;
|
|
|
|
hwif->io_ports[IDE_HCYL_OFFSET] = dma_base + 0x34;
|
|
|
|
hwif->io_ports[IDE_SELECT_OFFSET] = dma_base + 0x38;
|
|
|
|
hwif->io_ports[IDE_STATUS_OFFSET] = dma_base + 0x3c;
|
|
|
|
hwif->io_ports[IDE_CONTROL_OFFSET] = dma_base + 0x40;
|
|
|
|
|
|
|
|
hwif->irq = hwif->pci_dev->irq;
|
|
|
|
hwif->dma_base = dma_base;
|
|
|
|
hwif->config_data = ports->ctl;
|
2007-02-17 02:40:25 +01:00
|
|
|
hwif->mmio = 1;
|
2007-02-17 02:40:22 +01:00
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* init_iops_scc - set up iops
|
|
|
|
* @hwif: interface to set up
|
|
|
|
*
|
|
|
|
* Do the basic setup for the SCC hardware interface
|
|
|
|
* and then do the MMIO setup.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static void __devinit init_iops_scc(ide_hwif_t *hwif)
|
|
|
|
{
|
|
|
|
struct pci_dev *dev = hwif->pci_dev;
|
|
|
|
hwif->hwif_data = NULL;
|
|
|
|
if (pci_get_drvdata(dev) == NULL)
|
|
|
|
return;
|
|
|
|
init_mmio_iops_scc(hwif);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* init_hwif_scc - set up hwif
|
|
|
|
* @hwif: interface to set up
|
|
|
|
*
|
|
|
|
* We do the basic set up of the interface structure. The SCC
|
|
|
|
* requires several custom handlers so we override the default
|
|
|
|
* ide DMA handlers appropriately.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static void __devinit init_hwif_scc(ide_hwif_t *hwif)
|
|
|
|
{
|
|
|
|
struct scc_ports *ports = ide_get_hwifdata(hwif);
|
|
|
|
|
|
|
|
ports->hwif_id = hwif->index;
|
|
|
|
|
|
|
|
hwif->dma_command = hwif->dma_base;
|
|
|
|
hwif->dma_status = hwif->dma_base + 0x04;
|
|
|
|
hwif->dma_prdtable = hwif->dma_base + 0x08;
|
|
|
|
|
2007-02-17 02:40:25 +01:00
|
|
|
/* PTERADD */
|
|
|
|
out_be32((void __iomem *)(hwif->dma_base + 0x018), hwif->dmatable_dma);
|
2007-02-17 02:40:22 +01:00
|
|
|
|
2007-02-17 02:40:25 +01:00
|
|
|
hwif->dma_setup = scc_dma_setup;
|
2007-02-17 02:40:22 +01:00
|
|
|
hwif->ide_dma_end = scc_ide_dma_end;
|
|
|
|
hwif->speedproc = scc_tune_chipset;
|
|
|
|
hwif->tuneproc = scc_tuneproc;
|
|
|
|
hwif->ide_dma_check = scc_config_drive_for_dma;
|
|
|
|
|
|
|
|
hwif->drives[0].autotune = IDE_TUNE_AUTO;
|
|
|
|
hwif->drives[1].autotune = IDE_TUNE_AUTO;
|
|
|
|
|
2007-02-17 02:40:25 +01:00
|
|
|
if (in_be32((void __iomem *)(hwif->config_data + 0xff0)) & CCKCTRL_ATACLKOEN) {
|
2007-02-17 02:40:22 +01:00
|
|
|
hwif->ultra_mask = 0x7f; /* 133MHz */
|
|
|
|
} else {
|
|
|
|
hwif->ultra_mask = 0x3f; /* 100MHz */
|
|
|
|
}
|
|
|
|
hwif->mwdma_mask = 0x00;
|
|
|
|
hwif->swdma_mask = 0x00;
|
|
|
|
hwif->atapi_dma = 1;
|
|
|
|
|
|
|
|
/* we support 80c cable only. */
|
|
|
|
hwif->udma_four = 1;
|
|
|
|
|
|
|
|
hwif->autodma = 0;
|
|
|
|
if (!noautodma)
|
|
|
|
hwif->autodma = 1;
|
|
|
|
hwif->drives[0].autodma = hwif->autodma;
|
|
|
|
hwif->drives[1].autodma = hwif->autodma;
|
|
|
|
}
|
|
|
|
|
|
|
|
#define DECLARE_SCC_DEV(name_str) \
|
|
|
|
{ \
|
|
|
|
.name = name_str, \
|
|
|
|
.init_setup = init_setup_scc, \
|
|
|
|
.init_iops = init_iops_scc, \
|
|
|
|
.init_hwif = init_hwif_scc, \
|
|
|
|
.channels = 1, \
|
|
|
|
.autodma = AUTODMA, \
|
|
|
|
.bootable = ON_BOARD, \
|
|
|
|
}
|
|
|
|
|
|
|
|
static ide_pci_device_t scc_chipsets[] __devinitdata = {
|
|
|
|
/* 0 */ DECLARE_SCC_DEV("sccIDE"),
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* scc_init_one - pci layer discovery entry
|
|
|
|
* @dev: PCI device
|
|
|
|
* @id: ident table entry
|
|
|
|
*
|
|
|
|
* Called by the PCI code when it finds an SCC PATA controller.
|
|
|
|
* We then use the IDE PCI generic helper to do most of the work.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static int __devinit scc_init_one(struct pci_dev *dev, const struct pci_device_id *id)
|
|
|
|
{
|
|
|
|
ide_pci_device_t *d = &scc_chipsets[id->driver_data];
|
|
|
|
return d->init_setup(dev, d);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* scc_remove - pci layer remove entry
|
|
|
|
* @dev: PCI device
|
|
|
|
*
|
|
|
|
* Called by the PCI code when it removes an SCC PATA controller.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static void __devexit scc_remove(struct pci_dev *dev)
|
|
|
|
{
|
|
|
|
struct scc_ports *ports = pci_get_drvdata(dev);
|
|
|
|
ide_hwif_t *hwif = &ide_hwifs[ports->hwif_id];
|
|
|
|
unsigned long ctl_base = pci_resource_start(dev, 0);
|
|
|
|
unsigned long dma_base = pci_resource_start(dev, 1);
|
|
|
|
unsigned long ctl_size = pci_resource_len(dev, 0);
|
|
|
|
unsigned long dma_size = pci_resource_len(dev, 1);
|
|
|
|
|
|
|
|
if (hwif->dmatable_cpu) {
|
|
|
|
pci_free_consistent(hwif->pci_dev,
|
|
|
|
PRD_ENTRIES * PRD_BYTES,
|
|
|
|
hwif->dmatable_cpu,
|
|
|
|
hwif->dmatable_dma);
|
|
|
|
hwif->dmatable_cpu = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
ide_unregister(hwif->index);
|
|
|
|
|
|
|
|
hwif->chipset = ide_unknown;
|
|
|
|
iounmap((void*)ports->dma);
|
|
|
|
iounmap((void*)ports->ctl);
|
|
|
|
release_mem_region(dma_base, dma_size);
|
|
|
|
release_mem_region(ctl_base, ctl_size);
|
|
|
|
memset(ports, 0, sizeof(*ports));
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct pci_device_id scc_pci_tbl[] = {
|
|
|
|
{ PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
|
|
{ 0, },
|
|
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, scc_pci_tbl);
|
|
|
|
|
|
|
|
static struct pci_driver driver = {
|
|
|
|
.name = "SCC IDE",
|
|
|
|
.id_table = scc_pci_tbl,
|
|
|
|
.probe = scc_init_one,
|
|
|
|
.remove = scc_remove,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int scc_ide_init(void)
|
|
|
|
{
|
|
|
|
return ide_pci_register_driver(&driver);
|
|
|
|
}
|
|
|
|
|
|
|
|
module_init(scc_ide_init);
|
|
|
|
/* -- No exit code?
|
|
|
|
static void scc_ide_exit(void)
|
|
|
|
{
|
|
|
|
ide_pci_unregister_driver(&driver);
|
|
|
|
}
|
|
|
|
module_exit(scc_ide_exit);
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
|
|
MODULE_DESCRIPTION("PCI driver module for Toshiba SCC IDE");
|
|
|
|
MODULE_LICENSE("GPL");
|