linux/drivers/char/tpm/tpm_nsc.c

374 lines
9.7 KiB
C
Raw Normal View History

/*
* Copyright (C) 2004 IBM Corporation
*
* Authors:
* Leendert van Doorn <leendert@watson.ibm.com>
* Dave Safford <safford@watson.ibm.com>
* Reiner Sailer <sailer@watson.ibm.com>
* Kylene Hall <kjhall@us.ibm.com>
*
* Maintained by: <tpmdd_devel@lists.sourceforge.net>
*
* Device driver for TCG/TCPA TPM (trusted platform module).
* Specifications at www.trustedcomputinggroup.org
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation, version 2 of the
* License.
*
*/
#include "tpm.h"
/* National definitions */
#define TPM_NSC_BASE 0x360
#define TPM_NSC_IRQ 0x07
#define NSC_LDN_INDEX 0x07
#define NSC_SID_INDEX 0x20
#define NSC_LDC_INDEX 0x30
#define NSC_DIO_INDEX 0x60
#define NSC_CIO_INDEX 0x62
#define NSC_IRQ_INDEX 0x70
#define NSC_ITS_INDEX 0x71
#define NSC_STATUS 0x01
#define NSC_COMMAND 0x01
#define NSC_DATA 0x00
/* status bits */
#define NSC_STATUS_OBF 0x01 /* output buffer full */
#define NSC_STATUS_IBF 0x02 /* input buffer full */
#define NSC_STATUS_F0 0x04 /* F0 */
#define NSC_STATUS_A2 0x08 /* A2 */
#define NSC_STATUS_RDY 0x10 /* ready to receive command */
#define NSC_STATUS_IBR 0x20 /* ready to receive data */
/* command bits */
#define NSC_COMMAND_NORMAL 0x01 /* normal mode */
#define NSC_COMMAND_EOC 0x03
#define NSC_COMMAND_CANCEL 0x22
/*
* Wait for a certain status to appear
*/
static int wait_for_stat(struct tpm_chip *chip, u8 mask, u8 val, u8 * data)
{
int expired = 0;
struct timer_list status_timer =
TIMER_INITIALIZER(tpm_time_expired, jiffies + 10 * HZ,
(unsigned long) &expired);
/* status immediately available check */
*data = inb(chip->vendor->base + NSC_STATUS);
if ((*data & mask) == val)
return 0;
/* wait for status */
add_timer(&status_timer);
do {
set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout(TPM_TIMEOUT);
*data = inb(chip->vendor->base + 1);
if ((*data & mask) == val) {
del_singleshot_timer_sync(&status_timer);
return 0;
}
}
while (!expired);
return -EBUSY;
}
static int nsc_wait_for_ready(struct tpm_chip *chip)
{
int status;
int expired = 0;
struct timer_list status_timer =
TIMER_INITIALIZER(tpm_time_expired, jiffies + 100,
(unsigned long) &expired);
/* status immediately available check */
status = inb(chip->vendor->base + NSC_STATUS);
if (status & NSC_STATUS_OBF)
status = inb(chip->vendor->base + NSC_DATA);
if (status & NSC_STATUS_RDY)
return 0;
/* wait for status */
add_timer(&status_timer);
do {
set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout(TPM_TIMEOUT);
status = inb(chip->vendor->base + NSC_STATUS);
if (status & NSC_STATUS_OBF)
status = inb(chip->vendor->base + NSC_DATA);
if (status & NSC_STATUS_RDY) {
del_singleshot_timer_sync(&status_timer);
return 0;
}
}
while (!expired);
dev_info(&chip->pci_dev->dev, "wait for ready failed\n");
return -EBUSY;
}
static int tpm_nsc_recv(struct tpm_chip *chip, u8 * buf, size_t count)
{
u8 *buffer = buf;
u8 data, *p;
u32 size;
__be32 *native_size;
if (count < 6)
return -EIO;
if (wait_for_stat(chip, NSC_STATUS_F0, NSC_STATUS_F0, &data) < 0) {
dev_err(&chip->pci_dev->dev, "F0 timeout\n");
return -EIO;
}
if ((data =
inb(chip->vendor->base + NSC_DATA)) != NSC_COMMAND_NORMAL) {
dev_err(&chip->pci_dev->dev, "not in normal mode (0x%x)\n",
data);
return -EIO;
}
/* read the whole packet */
for (p = buffer; p < &buffer[count]; p++) {
if (wait_for_stat
(chip, NSC_STATUS_OBF, NSC_STATUS_OBF, &data) < 0) {
dev_err(&chip->pci_dev->dev,
"OBF timeout (while reading data)\n");
return -EIO;
}
if (data & NSC_STATUS_F0)
break;
*p = inb(chip->vendor->base + NSC_DATA);
}
if ((data & NSC_STATUS_F0) == 0) {
dev_err(&chip->pci_dev->dev, "F0 not set\n");
return -EIO;
}
if ((data = inb(chip->vendor->base + NSC_DATA)) != NSC_COMMAND_EOC) {
dev_err(&chip->pci_dev->dev,
"expected end of command(0x%x)\n", data);
return -EIO;
}
native_size = (__force __be32 *) (buf + 2);
size = be32_to_cpu(*native_size);
if (count < size)
return -EIO;
return size;
}
static int tpm_nsc_send(struct tpm_chip *chip, u8 * buf, size_t count)
{
u8 data;
int i;
/*
* If we hit the chip with back to back commands it locks up
* and never set IBF. Hitting it with this "hammer" seems to
* fix it. Not sure why this is needed, we followed the flow
* chart in the manual to the letter.
*/
outb(NSC_COMMAND_CANCEL, chip->vendor->base + NSC_COMMAND);
if (nsc_wait_for_ready(chip) != 0)
return -EIO;
if (wait_for_stat(chip, NSC_STATUS_IBF, 0, &data) < 0) {
dev_err(&chip->pci_dev->dev, "IBF timeout\n");
return -EIO;
}
outb(NSC_COMMAND_NORMAL, chip->vendor->base + NSC_COMMAND);
if (wait_for_stat(chip, NSC_STATUS_IBR, NSC_STATUS_IBR, &data) < 0) {
dev_err(&chip->pci_dev->dev, "IBR timeout\n");
return -EIO;
}
for (i = 0; i < count; i++) {
if (wait_for_stat(chip, NSC_STATUS_IBF, 0, &data) < 0) {
dev_err(&chip->pci_dev->dev,
"IBF timeout (while writing data)\n");
return -EIO;
}
outb(buf[i], chip->vendor->base + NSC_DATA);
}
if (wait_for_stat(chip, NSC_STATUS_IBF, 0, &data) < 0) {
dev_err(&chip->pci_dev->dev, "IBF timeout\n");
return -EIO;
}
outb(NSC_COMMAND_EOC, chip->vendor->base + NSC_COMMAND);
return count;
}
static void tpm_nsc_cancel(struct tpm_chip *chip)
{
outb(NSC_COMMAND_CANCEL, chip->vendor->base + NSC_COMMAND);
}
static struct file_operations nsc_ops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.open = tpm_open,
.read = tpm_read,
.write = tpm_write,
.release = tpm_release,
};
static struct tpm_vendor_specific tpm_nsc = {
.recv = tpm_nsc_recv,
.send = tpm_nsc_send,
.cancel = tpm_nsc_cancel,
.req_complete_mask = NSC_STATUS_OBF,
.req_complete_val = NSC_STATUS_OBF,
.base = TPM_NSC_BASE,
.miscdev = { .fops = &nsc_ops, },
};
static int __devinit tpm_nsc_init(struct pci_dev *pci_dev,
const struct pci_device_id *pci_id)
{
int rc = 0;
if (pci_enable_device(pci_dev))
return -EIO;
if (tpm_lpc_bus_init(pci_dev, TPM_NSC_BASE)) {
rc = -ENODEV;
goto out_err;
}
/* verify that it is a National part (SID) */
if (tpm_read_index(NSC_SID_INDEX) != 0xEF) {
rc = -ENODEV;
goto out_err;
}
dev_dbg(&pci_dev->dev, "NSC TPM detected\n");
dev_dbg(&pci_dev->dev,
"NSC LDN 0x%x, SID 0x%x, SRID 0x%x\n",
tpm_read_index(0x07), tpm_read_index(0x20),
tpm_read_index(0x27));
dev_dbg(&pci_dev->dev,
"NSC SIOCF1 0x%x SIOCF5 0x%x SIOCF6 0x%x SIOCF8 0x%x\n",
tpm_read_index(0x21), tpm_read_index(0x25),
tpm_read_index(0x26), tpm_read_index(0x28));
dev_dbg(&pci_dev->dev, "NSC IO Base0 0x%x\n",
(tpm_read_index(0x60) << 8) | tpm_read_index(0x61));
dev_dbg(&pci_dev->dev, "NSC IO Base1 0x%x\n",
(tpm_read_index(0x62) << 8) | tpm_read_index(0x63));
dev_dbg(&pci_dev->dev, "NSC Interrupt number and wakeup 0x%x\n",
tpm_read_index(0x70));
dev_dbg(&pci_dev->dev, "NSC IRQ type select 0x%x\n",
tpm_read_index(0x71));
dev_dbg(&pci_dev->dev,
"NSC DMA channel select0 0x%x, select1 0x%x\n",
tpm_read_index(0x74), tpm_read_index(0x75));
dev_dbg(&pci_dev->dev,
"NSC Config "
"0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n",
tpm_read_index(0xF0), tpm_read_index(0xF1),
tpm_read_index(0xF2), tpm_read_index(0xF3),
tpm_read_index(0xF4), tpm_read_index(0xF5),
tpm_read_index(0xF6), tpm_read_index(0xF7),
tpm_read_index(0xF8), tpm_read_index(0xF9));
dev_info(&pci_dev->dev,
"NSC PC21100 TPM revision %d\n",
tpm_read_index(0x27) & 0x1F);
if (tpm_read_index(NSC_LDC_INDEX) == 0)
dev_info(&pci_dev->dev, ": NSC TPM not active\n");
/* select PM channel 1 */
tpm_write_index(NSC_LDN_INDEX, 0x12);
tpm_read_index(NSC_LDN_INDEX);
/* disable the DPM module */
tpm_write_index(NSC_LDC_INDEX, 0);
tpm_read_index(NSC_LDC_INDEX);
/* set the data register base addresses */
tpm_write_index(NSC_DIO_INDEX, TPM_NSC_BASE >> 8);
tpm_write_index(NSC_DIO_INDEX + 1, TPM_NSC_BASE);
tpm_read_index(NSC_DIO_INDEX);
tpm_read_index(NSC_DIO_INDEX + 1);
/* set the command register base addresses */
tpm_write_index(NSC_CIO_INDEX, (TPM_NSC_BASE + 1) >> 8);
tpm_write_index(NSC_CIO_INDEX + 1, (TPM_NSC_BASE + 1));
tpm_read_index(NSC_DIO_INDEX);
tpm_read_index(NSC_DIO_INDEX + 1);
/* set the interrupt number to be used for the host interface */
tpm_write_index(NSC_IRQ_INDEX, TPM_NSC_IRQ);
tpm_write_index(NSC_ITS_INDEX, 0x00);
tpm_read_index(NSC_IRQ_INDEX);
/* enable the DPM module */
tpm_write_index(NSC_LDC_INDEX, 0x01);
tpm_read_index(NSC_LDC_INDEX);
if ((rc = tpm_register_hardware(pci_dev, &tpm_nsc)) < 0)
goto out_err;
return 0;
out_err:
pci_disable_device(pci_dev);
return rc;
}
static struct pci_device_id tpm_pci_tbl[] __devinitdata = {
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0)},
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12)},
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0)},
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12)},
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0)},
{PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_LPC)},
{0,}
};
MODULE_DEVICE_TABLE(pci, tpm_pci_tbl);
static struct pci_driver nsc_pci_driver = {
.name = "tpm_nsc",
.id_table = tpm_pci_tbl,
.probe = tpm_nsc_init,
.remove = __devexit_p(tpm_remove),
.suspend = tpm_pm_suspend,
.resume = tpm_pm_resume,
};
static int __init init_nsc(void)
{
return pci_register_driver(&nsc_pci_driver);
}
static void __exit cleanup_nsc(void)
{
pci_unregister_driver(&nsc_pci_driver);
}
module_init(init_nsc);
module_exit(cleanup_nsc);
MODULE_AUTHOR("Leendert van Doorn (leendert@watson.ibm.com)");
MODULE_DESCRIPTION("TPM Driver");
MODULE_VERSION("2.0");
MODULE_LICENSE("GPL");