linux/drivers/serial/serial_cs.c

748 lines
21 KiB
C
Raw Normal View History

/*======================================================================
A driver for PCMCIA serial devices
serial_cs.c 1.134 2002/05/04 05:48:53
The contents of this file are subject to the Mozilla Public
License Version 1.1 (the "License"); you may not use this file
except in compliance with the License. You may obtain a copy of
the License at http://www.mozilla.org/MPL/
Software distributed under the License is distributed on an "AS
IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
implied. See the License for the specific language governing
rights and limitations under the License.
The initial developer of the original code is David A. Hinds
<dahinds@users.sourceforge.net>. Portions created by David A. Hinds
are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
Alternatively, the contents of this file may be used under the
terms of the GNU General Public License version 2 (the "GPL"), in which
case the provisions of the GPL are applicable instead of the
above. If you wish to allow the use of your version of this file
only under the terms of the GPL and not to allow others to use
your version of this file under the MPL, indicate your decision
by deleting the provisions above and replace them with the notice
and other provisions required by the GPL. If you do not delete
the provisions above, a recipient may use your version of this
file under either the MPL or the GPL.
======================================================================*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/serial_core.h>
#include <linux/major.h>
#include <asm/io.h>
#include <asm/system.h>
#include <pcmcia/version.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ciscode.h>
#include <pcmcia/ds.h>
#include <pcmcia/cisreg.h>
#include "8250.h"
#ifdef PCMCIA_DEBUG
static int pc_debug = PCMCIA_DEBUG;
module_param(pc_debug, int, 0644);
#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
static char *version = "serial_cs.c 1.134 2002/05/04 05:48:53 (David Hinds)";
#else
#define DEBUG(n, args...)
#endif
/*====================================================================*/
/* Parameters that can be set with 'insmod' */
/* Enable the speaker? */
static int do_sound = 1;
/* Skip strict UART tests? */
static int buggy_uart;
module_param(do_sound, int, 0444);
module_param(buggy_uart, int, 0444);
/*====================================================================*/
/* Table of multi-port card ID's */
struct multi_id {
u_short manfid;
u_short prodid;
int multi; /* 1 = multifunction, > 1 = # ports */
};
static struct multi_id multi_id[] = {
{ MANFID_OMEGA, PRODID_OMEGA_QSP_100, 4 },
{ MANFID_QUATECH, PRODID_QUATECH_DUAL_RS232, 2 },
{ MANFID_QUATECH, PRODID_QUATECH_DUAL_RS232_D1, 2 },
{ MANFID_QUATECH, PRODID_QUATECH_QUAD_RS232, 4 },
{ MANFID_SOCKET, PRODID_SOCKET_DUAL_RS232, 2 },
{ MANFID_INTEL, PRODID_INTEL_DUAL_RS232, 2 },
{ MANFID_NATINST, PRODID_NATINST_QUAD_RS232, 4 }
};
#define MULTI_COUNT (sizeof(multi_id)/sizeof(struct multi_id))
struct serial_info {
dev_link_t link;
int ndev;
int multi;
int slave;
int manfid;
dev_node_t node[4];
int line[4];
};
static void serial_config(dev_link_t * link);
static int serial_event(event_t event, int priority,
event_callback_args_t * args);
static dev_info_t dev_info = "serial_cs";
static dev_link_t *serial_attach(void);
static void serial_detach(dev_link_t *);
static dev_link_t *dev_list = NULL;
/*======================================================================
After a card is removed, serial_remove() will unregister
the serial device(s), and release the PCMCIA configuration.
======================================================================*/
static void serial_remove(dev_link_t *link)
{
struct serial_info *info = link->priv;
int i;
link->state &= ~DEV_PRESENT;
DEBUG(0, "serial_release(0x%p)\n", link);
/*
* Recheck to see if the device is still configured.
*/
if (info->link.state & DEV_CONFIG) {
for (i = 0; i < info->ndev; i++)
serial8250_unregister_port(info->line[i]);
info->link.dev = NULL;
if (!info->slave) {
pcmcia_release_configuration(info->link.handle);
pcmcia_release_io(info->link.handle, &info->link.io);
pcmcia_release_irq(info->link.handle, &info->link.irq);
}
info->link.state &= ~DEV_CONFIG;
}
}
static void serial_suspend(dev_link_t *link)
{
link->state |= DEV_SUSPEND;
if (link->state & DEV_CONFIG) {
struct serial_info *info = link->priv;
int i;
for (i = 0; i < info->ndev; i++)
serial8250_suspend_port(info->line[i]);
if (!info->slave)
pcmcia_release_configuration(link->handle);
}
}
static void serial_resume(dev_link_t *link)
{
link->state &= ~DEV_SUSPEND;
if (DEV_OK(link)) {
struct serial_info *info = link->priv;
int i;
if (!info->slave)
pcmcia_request_configuration(link->handle, &link->conf);
for (i = 0; i < info->ndev; i++)
serial8250_resume_port(info->line[i]);
}
}
/*======================================================================
serial_attach() creates an "instance" of the driver, allocating
local data structures for one device. The device is registered
with Card Services.
======================================================================*/
static dev_link_t *serial_attach(void)
{
struct serial_info *info;
client_reg_t client_reg;
dev_link_t *link;
int ret;
DEBUG(0, "serial_attach()\n");
/* Create new serial device */
info = kmalloc(sizeof (*info), GFP_KERNEL);
if (!info)
return NULL;
memset(info, 0, sizeof (*info));
link = &info->link;
link->priv = info;
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
link->io.NumPorts1 = 8;
link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->conf.Attributes = CONF_ENABLE_IRQ;
if (do_sound) {
link->conf.Attributes |= CONF_ENABLE_SPKR;
link->conf.Status = CCSR_AUDIO_ENA;
}
link->conf.IntType = INT_MEMORY_AND_IO;
/* Register with Card Services */
link->next = dev_list;
dev_list = link;
client_reg.dev_info = &dev_info;
client_reg.EventMask =
CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL |
CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET |
CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME;
client_reg.event_handler = &serial_event;
client_reg.Version = 0x0210;
client_reg.event_callback_args.client_data = link;
ret = pcmcia_register_client(&link->handle, &client_reg);
if (ret != CS_SUCCESS) {
cs_error(link->handle, RegisterClient, ret);
serial_detach(link);
return NULL;
}
return link;
}
/*======================================================================
This deletes a driver "instance". The device is de-registered
with Card Services. If it has been released, all local data
structures are freed. Otherwise, the structures will be freed
when the device is released.
======================================================================*/
static void serial_detach(dev_link_t * link)
{
struct serial_info *info = link->priv;
dev_link_t **linkp;
int ret;
DEBUG(0, "serial_detach(0x%p)\n", link);
/* Locate device structure */
for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
if (*linkp == link)
break;
if (*linkp == NULL)
return;
/*
* Ensure any outstanding scheduled tasks are completed.
*/
flush_scheduled_work();
/*
* Ensure that the ports have been released.
*/
serial_remove(link);
if (link->handle) {
ret = pcmcia_deregister_client(link->handle);
if (ret != CS_SUCCESS)
cs_error(link->handle, DeregisterClient, ret);
}
/* Unlink device structure, free bits */
*linkp = link->next;
kfree(info);
}
/*====================================================================*/
static int setup_serial(client_handle_t handle, struct serial_info * info,
kio_addr_t iobase, int irq)
{
struct uart_port port;
int line;
memset(&port, 0, sizeof (struct uart_port));
port.iobase = iobase;
port.irq = irq;
port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
port.uartclk = 1843200;
port.dev = &handle_to_dev(handle);
if (buggy_uart)
port.flags |= UPF_BUGGY_UART;
line = serial8250_register_port(&port);
if (line < 0) {
printk(KERN_NOTICE "serial_cs: serial8250_register_port() at "
"0x%04lx, irq %d failed\n", (u_long)iobase, irq);
return -EINVAL;
}
info->line[info->ndev] = line;
sprintf(info->node[info->ndev].dev_name, "ttyS%d", line);
info->node[info->ndev].major = TTY_MAJOR;
info->node[info->ndev].minor = 0x40 + line;
if (info->ndev > 0)
info->node[info->ndev - 1].next = &info->node[info->ndev];
info->ndev++;
return 0;
}
/*====================================================================*/
static int
first_tuple(client_handle_t handle, tuple_t * tuple, cisparse_t * parse)
{
int i;
i = pcmcia_get_first_tuple(handle, tuple);
if (i != CS_SUCCESS)
return CS_NO_MORE_ITEMS;
i = pcmcia_get_tuple_data(handle, tuple);
if (i != CS_SUCCESS)
return i;
return pcmcia_parse_tuple(handle, tuple, parse);
}
static int
next_tuple(client_handle_t handle, tuple_t * tuple, cisparse_t * parse)
{
int i;
i = pcmcia_get_next_tuple(handle, tuple);
if (i != CS_SUCCESS)
return CS_NO_MORE_ITEMS;
i = pcmcia_get_tuple_data(handle, tuple);
if (i != CS_SUCCESS)
return i;
return pcmcia_parse_tuple(handle, tuple, parse);
}
/*====================================================================*/
static int simple_config(dev_link_t *link)
{
static kio_addr_t base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
static int size_table[2] = { 8, 16 };
client_handle_t handle = link->handle;
struct serial_info *info = link->priv;
tuple_t tuple;
u_char buf[256];
cisparse_t parse;
cistpl_cftable_entry_t *cf = &parse.cftable_entry;
config_info_t config;
int i, j, try;
int s;
/* If the card is already configured, look up the port and irq */
i = pcmcia_get_configuration_info(handle, &config);
if ((i == CS_SUCCESS) && (config.Attributes & CONF_VALID_CLIENT)) {
kio_addr_t port = 0;
if ((config.BasePort2 != 0) && (config.NumPorts2 == 8)) {
port = config.BasePort2;
info->slave = 1;
} else if ((info->manfid == MANFID_OSITECH) &&
(config.NumPorts1 == 0x40)) {
port = config.BasePort1 + 0x28;
info->slave = 1;
}
if (info->slave)
return setup_serial(handle, info, port, config.AssignedIRQ);
}
link->conf.Vcc = config.Vcc;
/* First pass: look for a config entry that looks normal. */
tuple.TupleData = (cisdata_t *) buf;
tuple.TupleOffset = 0;
tuple.TupleDataMax = 255;
tuple.Attributes = 0;
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
/* Two tries: without IO aliases, then with aliases */
for (s = 0; s < 2; s++) {
for (try = 0; try < 2; try++) {
i = first_tuple(handle, &tuple, &parse);
while (i != CS_NO_MORE_ITEMS) {
if (i != CS_SUCCESS)
goto next_entry;
if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
link->conf.Vpp1 = link->conf.Vpp2 =
cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[s]) &&
(cf->io.win[0].base != 0)) {
link->conf.ConfigIndex = cf->index;
link->io.BasePort1 = cf->io.win[0].base;
link->io.IOAddrLines = (try == 0) ?
16 : cf->io.flags & CISTPL_IO_LINES_MASK;
i = pcmcia_request_io(link->handle, &link->io);
if (i == CS_SUCCESS)
goto found_port;
}
next_entry:
i = next_tuple(handle, &tuple, &parse);
}
}
}
/* Second pass: try to find an entry that isn't picky about
its base address, then try to grab any standard serial port
address, and finally try to get any free port. */
i = first_tuple(handle, &tuple, &parse);
while (i != CS_NO_MORE_ITEMS) {
if ((i == CS_SUCCESS) && (cf->io.nwin > 0) &&
((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
link->conf.ConfigIndex = cf->index;
for (j = 0; j < 5; j++) {
link->io.BasePort1 = base[j];
link->io.IOAddrLines = base[j] ? 16 : 3;
i = pcmcia_request_io(link->handle, &link->io);
if (i == CS_SUCCESS)
goto found_port;
}
}
i = next_tuple(handle, &tuple, &parse);
}
found_port:
if (i != CS_SUCCESS) {
printk(KERN_NOTICE
"serial_cs: no usable port range found, giving up\n");
cs_error(link->handle, RequestIO, i);
return -1;
}
i = pcmcia_request_irq(link->handle, &link->irq);
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestIRQ, i);
link->irq.AssignedIRQ = 0;
}
if (info->multi && (info->manfid == MANFID_3COM))
link->conf.ConfigIndex &= ~(0x08);
i = pcmcia_request_configuration(link->handle, &link->conf);
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestConfiguration, i);
return -1;
}
return setup_serial(handle, info, link->io.BasePort1, link->irq.AssignedIRQ);
}
static int multi_config(dev_link_t * link)
{
client_handle_t handle = link->handle;
struct serial_info *info = link->priv;
tuple_t tuple;
u_char buf[256];
cisparse_t parse;
cistpl_cftable_entry_t *cf = &parse.cftable_entry;
config_info_t config;
int i, base2 = 0;
i = pcmcia_get_configuration_info(handle, &config);
if (i != CS_SUCCESS) {
cs_error(handle, GetConfigurationInfo, i);
return -1;
}
link->conf.Vcc = config.Vcc;
tuple.TupleData = (cisdata_t *) buf;
tuple.TupleOffset = 0;
tuple.TupleDataMax = 255;
tuple.Attributes = 0;
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
/* First, look for a generic full-sized window */
link->io.NumPorts1 = info->multi * 8;
i = first_tuple(handle, &tuple, &parse);
while (i != CS_NO_MORE_ITEMS) {
/* The quad port cards have bad CIS's, so just look for a
window larger than 8 ports and assume it will be right */
if ((i == CS_SUCCESS) && (cf->io.nwin == 1) &&
(cf->io.win[0].len > 8)) {
link->conf.ConfigIndex = cf->index;
link->io.BasePort1 = cf->io.win[0].base;
link->io.IOAddrLines =
cf->io.flags & CISTPL_IO_LINES_MASK;
i = pcmcia_request_io(link->handle, &link->io);
base2 = link->io.BasePort1 + 8;
if (i == CS_SUCCESS)
break;
}
i = next_tuple(handle, &tuple, &parse);
}
/* If that didn't work, look for two windows */
if (i != CS_SUCCESS) {
link->io.NumPorts1 = link->io.NumPorts2 = 8;
info->multi = 2;
i = first_tuple(handle, &tuple, &parse);
while (i != CS_NO_MORE_ITEMS) {
if ((i == CS_SUCCESS) && (cf->io.nwin == 2)) {
link->conf.ConfigIndex = cf->index;
link->io.BasePort1 = cf->io.win[0].base;
link->io.BasePort2 = cf->io.win[1].base;
link->io.IOAddrLines =
cf->io.flags & CISTPL_IO_LINES_MASK;
i = pcmcia_request_io(link->handle, &link->io);
base2 = link->io.BasePort2;
if (i == CS_SUCCESS)
break;
}
i = next_tuple(handle, &tuple, &parse);
}
}
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestIO, i);
return -1;
}
i = pcmcia_request_irq(link->handle, &link->irq);
if (i != CS_SUCCESS) {
printk(KERN_NOTICE
"serial_cs: no usable port range found, giving up\n");
cs_error(link->handle, RequestIRQ, i);
link->irq.AssignedIRQ = 0;
}
/* Socket Dual IO: this enables irq's for second port */
if (info->multi && (info->manfid == MANFID_SOCKET)) {
link->conf.Present |= PRESENT_EXT_STATUS;
link->conf.ExtStatus = ESR_REQ_ATTN_ENA;
}
i = pcmcia_request_configuration(link->handle, &link->conf);
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestConfiguration, i);
return -1;
}
/* The Oxford Semiconductor OXCF950 cards are in fact single-port:
8 registers are for the UART, the others are extra registers */
if (info->manfid == MANFID_OXSEMI) {
if (cf->index == 1 || cf->index == 3) {
setup_serial(handle, info, base2, link->irq.AssignedIRQ);
outb(12, link->io.BasePort1 + 1);
} else {
setup_serial(handle, info, link->io.BasePort1, link->irq.AssignedIRQ);
outb(12, base2 + 1);
}
return 0;
}
setup_serial(handle, info, link->io.BasePort1, link->irq.AssignedIRQ);
/* The Nokia cards are not really multiport cards */
if (info->manfid == MANFID_NOKIA)
return 0;
for (i = 0; i < info->multi - 1; i++)
setup_serial(handle, info, base2 + (8 * i), link->irq.AssignedIRQ);
return 0;
}
/*======================================================================
serial_config() is scheduled to run after a CARD_INSERTION event
is received, to configure the PCMCIA socket, and to make the
serial device available to the system.
======================================================================*/
void serial_config(dev_link_t * link)
{
client_handle_t handle = link->handle;
struct serial_info *info = link->priv;
tuple_t tuple;
u_short buf[128];
cisparse_t parse;
cistpl_cftable_entry_t *cf = &parse.cftable_entry;
int i, last_ret, last_fn;
DEBUG(0, "serial_config(0x%p)\n", link);
tuple.TupleData = (cisdata_t *) buf;
tuple.TupleOffset = 0;
tuple.TupleDataMax = 255;
tuple.Attributes = 0;
/* Get configuration register information */
tuple.DesiredTuple = CISTPL_CONFIG;
last_ret = first_tuple(handle, &tuple, &parse);
if (last_ret != CS_SUCCESS) {
last_fn = ParseTuple;
goto cs_failed;
}
link->conf.ConfigBase = parse.config.base;
link->conf.Present = parse.config.rmask[0];
/* Configure card */
link->state |= DEV_CONFIG;
/* Is this a compliant multifunction card? */
tuple.DesiredTuple = CISTPL_LONGLINK_MFC;
tuple.Attributes = TUPLE_RETURN_COMMON | TUPLE_RETURN_LINK;
info->multi = (first_tuple(handle, &tuple, &parse) == CS_SUCCESS);
/* Is this a multiport card? */
tuple.DesiredTuple = CISTPL_MANFID;
if (first_tuple(handle, &tuple, &parse) == CS_SUCCESS) {
info->manfid = le16_to_cpu(buf[0]);
for (i = 0; i < MULTI_COUNT; i++)
if ((info->manfid == multi_id[i].manfid) &&
(le16_to_cpu(buf[1]) == multi_id[i].prodid))
break;
if (i < MULTI_COUNT)
info->multi = multi_id[i].multi;
}
/* Another check for dual-serial cards: look for either serial or
multifunction cards that ask for appropriate IO port ranges */
tuple.DesiredTuple = CISTPL_FUNCID;
if ((info->multi == 0) &&
((first_tuple(handle, &tuple, &parse) != CS_SUCCESS) ||
(parse.funcid.func == CISTPL_FUNCID_MULTI) ||
(parse.funcid.func == CISTPL_FUNCID_SERIAL))) {
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
if (first_tuple(handle, &tuple, &parse) == CS_SUCCESS) {
if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0))
info->multi = cf->io.win[0].len >> 3;
if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) &&
(cf->io.win[1].len == 8))
info->multi = 2;
}
}
if (info->multi > 1)
multi_config(link);
else
simple_config(link);
if (info->ndev == 0)
goto failed;
if (info->manfid == MANFID_IBM) {
conf_reg_t reg = { 0, CS_READ, 0x800, 0 };
last_ret = pcmcia_access_configuration_register(link->handle, &reg);
if (last_ret) {
last_fn = AccessConfigurationRegister;
goto cs_failed;
}
reg.Action = CS_WRITE;
reg.Value = reg.Value | 1;
last_ret = pcmcia_access_configuration_register(link->handle, &reg);
if (last_ret) {
last_fn = AccessConfigurationRegister;
goto cs_failed;
}
}
link->dev = &info->node[0];
link->state &= ~DEV_CONFIG_PENDING;
return;
cs_failed:
cs_error(link->handle, last_fn, last_ret);
failed:
serial_remove(link);
link->state &= ~DEV_CONFIG_PENDING;
}
/*======================================================================
The card status event handler. Mostly, this schedules other
stuff to run after an event is received. A CARD_REMOVAL event
also sets some flags to discourage the serial drivers from
talking to the ports.
======================================================================*/
static int
serial_event(event_t event, int priority, event_callback_args_t * args)
{
dev_link_t *link = args->client_data;
struct serial_info *info = link->priv;
DEBUG(1, "serial_event(0x%06x)\n", event);
switch (event) {
case CS_EVENT_CARD_REMOVAL:
serial_remove(link);
break;
case CS_EVENT_CARD_INSERTION:
link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
serial_config(link);
break;
case CS_EVENT_PM_SUSPEND:
serial_suspend(link);
break;
case CS_EVENT_RESET_PHYSICAL:
if ((link->state & DEV_CONFIG) && !info->slave)
pcmcia_release_configuration(link->handle);
break;
case CS_EVENT_PM_RESUME:
serial_resume(link);
break;
case CS_EVENT_CARD_RESET:
if (DEV_OK(link) && !info->slave)
pcmcia_request_configuration(link->handle, &link->conf);
break;
}
return 0;
}
static struct pcmcia_driver serial_cs_driver = {
.owner = THIS_MODULE,
.drv = {
.name = "serial_cs",
},
.attach = serial_attach,
.detach = serial_detach,
};
static int __init init_serial_cs(void)
{
return pcmcia_register_driver(&serial_cs_driver);
}
static void __exit exit_serial_cs(void)
{
pcmcia_unregister_driver(&serial_cs_driver);
BUG_ON(dev_list != NULL);
}
module_init(init_serial_cs);
module_exit(exit_serial_cs);
MODULE_LICENSE("GPL");