linux/arch/powerpc/mm/Makefile

46 lines
1.8 KiB
Makefile
Raw Normal View History

#
# Makefile for the linux ppc-specific parts of the memory manager.
#
subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror
ccflags-$(CONFIG_PPC64) := $(NO_MINIMAL_TOC)
obj-y := fault.o mem.o pgtable.o mmap.o \
init_$(BITS).o pgtable_$(BITS).o \
init-common.o mmu_context.o
obj-$(CONFIG_PPC_MMU_NOHASH) += mmu_context_nohash.o tlb_nohash.o \
tlb_nohash_low.o
obj-$(CONFIG_PPC_BOOK3E) += tlb_low_$(BITS)e.o
hash64-$(CONFIG_PPC_NATIVE) := hash_native_64.o
obj-$(CONFIG_PPC_BOOK3E_64) += pgtable-book3e.o
obj-$(CONFIG_PPC_STD_MMU_64) += pgtable-hash64.o hash_utils_64.o slb_low.o slb.o $(hash64-y) mmu_context_book3s64.o pgtable-book3s64.o
obj-$(CONFIG_PPC_RADIX_MMU) += pgtable-radix.o tlb-radix.o
obj-$(CONFIG_PPC_STD_MMU_32) += ppc_mmu_32.o hash_low_32.o mmu_context_hash32.o
obj-$(CONFIG_PPC_STD_MMU) += tlb_hash$(BITS).o
ifeq ($(CONFIG_PPC_STD_MMU_64),y)
obj-$(CONFIG_PPC_4K_PAGES) += hash64_4k.o
obj-$(CONFIG_PPC_64K_PAGES) += hash64_64k.o
endif
obj-$(CONFIG_40x) += 40x_mmu.o
obj-$(CONFIG_44x) += 44x_mmu.o
2016-02-09 17:07:50 +01:00
obj-$(CONFIG_PPC_8xx) += 8xx_mmu.o
obj-$(CONFIG_PPC_FSL_BOOK3E) += fsl_booke_mmu.o
obj-$(CONFIG_NEED_MULTIPLE_NODES) += numa.o
obj-$(CONFIG_PPC_SPLPAR) += vphn.o
[POWERPC] Introduce address space "slices" The basic issue is to be able to do what hugetlbfs does but with different page sizes for some other special filesystems; more specifically, my need is: - Huge pages - SPE local store mappings using 64K pages on a 4K base page size kernel on Cell - Some special 4K segments in 64K-page kernels for mapping a dodgy type of powerpc-specific infiniband hardware that requires 4K MMU mappings for various reasons I won't explain here. The main issues are: - To maintain/keep track of the page size per "segment" (as we can only have one page size per segment on powerpc, which are 256MB divisions of the address space). - To make sure special mappings stay within their allotted "segments" (including MAP_FIXED crap) - To make sure everybody else doesn't mmap/brk/grow_stack into a "segment" that is used for a special mapping Some of the necessary mechanisms to handle that were present in the hugetlbfs code, but mostly in ways not suitable for anything else. The patch relies on some changes to the generic get_unmapped_area() that just got merged. It still hijacks hugetlb callbacks here or there as the generic code hasn't been entirely cleaned up yet but that shouldn't be a problem. So what is a slice ? Well, I re-used the mechanism used formerly by our hugetlbfs implementation which divides the address space in "meta-segments" which I called "slices". The division is done using 256MB slices below 4G, and 1T slices above. Thus the address space is divided currently into 16 "low" slices and 16 "high" slices. (Special case: high slice 0 is the area between 4G and 1T). Doing so simplifies significantly the tracking of segments and avoids having to keep track of all the 256MB segments in the address space. While I used the "concepts" of hugetlbfs, I mostly re-implemented everything in a more generic way and "ported" hugetlbfs to it. Slices can have an associated page size, which is encoded in the mmu context and used by the SLB miss handler to set the segment sizes. The hash code currently doesn't care, it has a specific check for hugepages, though I might add a mechanism to provide per-slice hash mapping functions in the future. The slice code provide a pair of "generic" get_unmapped_area() (bottomup and topdown) functions that should work with any slice size. There is some trickiness here so I would appreciate people to have a look at the implementation of these and let me know if I got something wrong. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08 08:27:27 +02:00
obj-$(CONFIG_PPC_MM_SLICES) += slice.o
obj-y += hugetlbpage.o
ifeq ($(CONFIG_HUGETLB_PAGE),y)
obj-$(CONFIG_PPC_STD_MMU_64) += hugetlbpage-hash64.o
obj-$(CONFIG_PPC_RADIX_MMU) += hugetlbpage-radix.o
obj-$(CONFIG_PPC_BOOK3E_MMU) += hugetlbpage-book3e.o
endif
obj-$(CONFIG_TRANSPARENT_HUGEPAGE) += hugepage-hash64.o
[POWERPC] Provide a way to protect 4k subpages when using 64k pages Using 64k pages on 64-bit PowerPC systems makes life difficult for emulators that are trying to emulate an ISA, such as x86, which use a smaller page size, since the emulator can no longer use the MMU and the normal system calls for controlling page protections. Of course, the emulator can emulate the MMU by checking and possibly remapping the address for each memory access in software, but that is pretty slow. This provides a facility for such programs to control the access permissions on individual 4k sub-pages of 64k pages. The idea is that the emulator supplies an array of protection masks to apply to a specified range of virtual addresses. These masks are applied at the level where hardware PTEs are inserted into the hardware page table based on the Linux PTEs, so the Linux PTEs are not affected. Note that this new mechanism does not allow any access that would otherwise be prohibited; it can only prohibit accesses that would otherwise be allowed. This new facility is only available on 64-bit PowerPC and only when the kernel is configured for 64k pages. The masks are supplied using a new subpage_prot system call, which takes a starting virtual address and length, and a pointer to an array of protection masks in memory. The array has a 32-bit word per 64k page to be protected; each 32-bit word consists of 16 2-bit fields, for which 0 allows any access (that is otherwise allowed), 1 prevents write accesses, and 2 or 3 prevent any access. Implicit in this is that the regions of the address space that are protected are switched to use 4k hardware pages rather than 64k hardware pages (on machines with hardware 64k page support). In fact the whole process is switched to use 4k hardware pages when the subpage_prot system call is used, but this could be improved in future to switch only the affected segments. The subpage protection bits are stored in a 3 level tree akin to the page table tree. The top level of this tree is stored in a structure that is appended to the top level of the page table tree, i.e., the pgd array. Since it will often only be 32-bit addresses (below 4GB) that are protected, the pointers to the first four bottom level pages are also stored in this structure (each bottom level page contains the protection bits for 1GB of address space), so the protection bits for addresses below 4GB can be accessed with one fewer loads than those for higher addresses. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-23 22:35:13 +01:00
obj-$(CONFIG_PPC_SUBPAGE_PROT) += subpage-prot.o
obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o
obj-$(CONFIG_HIGHMEM) += highmem.o
obj-$(CONFIG_PPC_COPRO_BASE) += copro_fault.o
powerpc/mmu: Add userspace-to-physical addresses translation cache We are adding support for DMA memory pre-registration to be used in conjunction with VFIO. The idea is that the userspace which is going to run a guest may want to pre-register a user space memory region so it all gets pinned once and never goes away. Having this done, a hypervisor will not have to pin/unpin pages on every DMA map/unmap request. This is going to help with multiple pinning of the same memory. Another use of it is in-kernel real mode (mmu off) acceleration of DMA requests where real time translation of guest physical to host physical addresses is non-trivial and may fail as linux ptes may be temporarily invalid. Also, having cached host physical addresses (compared to just pinning at the start and then walking the page table again on every H_PUT_TCE), we can be sure that the addresses which we put into TCE table are the ones we already pinned. This adds a list of memory regions to mm_context_t. Each region consists of a header and a list of physical addresses. This adds API to: 1. register/unregister memory regions; 2. do final cleanup (which puts all pre-registered pages); 3. do userspace to physical address translation; 4. manage usage counters; multiple registration of the same memory is allowed (once per container). This implements 2 counters per registered memory region: - @mapped: incremented on every DMA mapping; decremented on unmapping; initialized to 1 when a region is just registered; once it becomes zero, no more mappings allowe; - @used: incremented on every "register" ioctl; decremented on "unregister"; unregistration is allowed for DMA mapped regions unless it is the very last reference. For the very last reference this checks that the region is still mapped and returns -EBUSY so the userspace gets to know that memory is still pinned and unregistration needs to be retried; @used remains 1. Host physical addresses are stored in vmalloc'ed array. In order to access these in the real mode (mmu off), there is a real_vmalloc_addr() helper. In-kernel acceleration patchset will move it from KVM to MMU code. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 08:35:24 +02:00
obj-$(CONFIG_SPAPR_TCE_IOMMU) += mmu_context_iommu.o
obj-$(CONFIG_PPC_PTDUMP) += dump_linuxpagetables.o
obj-$(CONFIG_PPC_HTDUMP) += dump_hashpagetable.o