linux/drivers/pinctrl/pinctrl-baytrail.c

617 lines
15 KiB
C
Raw Normal View History

/*
* Pinctrl GPIO driver for Intel Baytrail
* Copyright (c) 2012-2013, Intel Corporation.
*
* Author: Mathias Nyman <mathias.nyman@linux.intel.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/bitops.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
#include <linux/acpi.h>
#include <linux/platform_device.h>
#include <linux/seq_file.h>
#include <linux/io.h>
#include <linux/pm_runtime.h>
#include <linux/pinctrl/pinctrl.h>
/* memory mapped register offsets */
#define BYT_CONF0_REG 0x000
#define BYT_CONF1_REG 0x004
#define BYT_VAL_REG 0x008
#define BYT_DFT_REG 0x00c
#define BYT_INT_STAT_REG 0x800
/* BYT_CONF0_REG register bits */
#define BYT_IODEN BIT(31)
#define BYT_DIRECT_IRQ_EN BIT(27)
#define BYT_TRIG_NEG BIT(26)
#define BYT_TRIG_POS BIT(25)
#define BYT_TRIG_LVL BIT(24)
#define BYT_PULL_STR_SHIFT 9
#define BYT_PULL_STR_MASK (3 << BYT_PULL_STR_SHIFT)
#define BYT_PULL_STR_2K (0 << BYT_PULL_STR_SHIFT)
#define BYT_PULL_STR_10K (1 << BYT_PULL_STR_SHIFT)
#define BYT_PULL_STR_20K (2 << BYT_PULL_STR_SHIFT)
#define BYT_PULL_STR_40K (3 << BYT_PULL_STR_SHIFT)
#define BYT_PULL_ASSIGN_SHIFT 7
#define BYT_PULL_ASSIGN_MASK (3 << BYT_PULL_ASSIGN_SHIFT)
#define BYT_PULL_ASSIGN_UP (1 << BYT_PULL_ASSIGN_SHIFT)
#define BYT_PULL_ASSIGN_DOWN (2 << BYT_PULL_ASSIGN_SHIFT)
#define BYT_PIN_MUX 0x07
/* BYT_VAL_REG register bits */
#define BYT_INPUT_EN BIT(2) /* 0: input enabled (active low)*/
#define BYT_OUTPUT_EN BIT(1) /* 0: output enabled (active low)*/
#define BYT_LEVEL BIT(0)
#define BYT_DIR_MASK (BIT(1) | BIT(2))
#define BYT_TRIG_MASK (BIT(26) | BIT(25) | BIT(24))
#define BYT_NGPIO_SCORE 102
#define BYT_NGPIO_NCORE 28
#define BYT_NGPIO_SUS 44
#define BYT_SCORE_ACPI_UID "1"
#define BYT_NCORE_ACPI_UID "2"
#define BYT_SUS_ACPI_UID "3"
/*
* Baytrail gpio controller consist of three separate sub-controllers called
* SCORE, NCORE and SUS. The sub-controllers are identified by their acpi UID.
*
* GPIO numbering is _not_ ordered meaning that gpio # 0 in ACPI namespace does
* _not_ correspond to the first gpio register at controller's gpio base.
* There is no logic or pattern in mapping gpio numbers to registers (pads) so
* each sub-controller needs to have its own mapping table
*/
/* score_pins[gpio_nr] = pad_nr */
static unsigned const score_pins[BYT_NGPIO_SCORE] = {
85, 89, 93, 96, 99, 102, 98, 101, 34, 37,
36, 38, 39, 35, 40, 84, 62, 61, 64, 59,
54, 56, 60, 55, 63, 57, 51, 50, 53, 47,
52, 49, 48, 43, 46, 41, 45, 42, 58, 44,
95, 105, 70, 68, 67, 66, 69, 71, 65, 72,
86, 90, 88, 92, 103, 77, 79, 83, 78, 81,
80, 82, 13, 12, 15, 14, 17, 18, 19, 16,
2, 1, 0, 4, 6, 7, 9, 8, 33, 32,
31, 30, 29, 27, 25, 28, 26, 23, 21, 20,
24, 22, 5, 3, 10, 11, 106, 87, 91, 104,
97, 100,
};
static unsigned const ncore_pins[BYT_NGPIO_NCORE] = {
19, 18, 17, 20, 21, 22, 24, 25, 23, 16,
14, 15, 12, 26, 27, 1, 4, 8, 11, 0,
3, 6, 10, 13, 2, 5, 9, 7,
};
static unsigned const sus_pins[BYT_NGPIO_SUS] = {
29, 33, 30, 31, 32, 34, 36, 35, 38, 37,
18, 7, 11, 20, 17, 1, 8, 10, 19, 12,
0, 2, 23, 39, 28, 27, 22, 21, 24, 25,
26, 51, 56, 54, 49, 55, 48, 57, 50, 58,
52, 53, 59, 40,
};
static struct pinctrl_gpio_range byt_ranges[] = {
{
.name = BYT_SCORE_ACPI_UID, /* match with acpi _UID in probe */
.npins = BYT_NGPIO_SCORE,
.pins = score_pins,
},
{
.name = BYT_NCORE_ACPI_UID,
.npins = BYT_NGPIO_NCORE,
.pins = ncore_pins,
},
{
.name = BYT_SUS_ACPI_UID,
.npins = BYT_NGPIO_SUS,
.pins = sus_pins,
},
{
},
};
struct byt_gpio {
struct gpio_chip chip;
struct platform_device *pdev;
spinlock_t lock;
void __iomem *reg_base;
struct pinctrl_gpio_range *range;
};
#define to_byt_gpio(c) container_of(c, struct byt_gpio, chip)
static void __iomem *byt_gpio_reg(struct gpio_chip *chip, unsigned offset,
int reg)
{
struct byt_gpio *vg = to_byt_gpio(chip);
u32 reg_offset;
if (reg == BYT_INT_STAT_REG)
reg_offset = (offset / 32) * 4;
else
reg_offset = vg->range->pins[offset] * 16;
return vg->reg_base + reg_offset + reg;
}
static bool is_special_pin(struct byt_gpio *vg, unsigned offset)
{
/* SCORE pin 92-93 */
if (!strcmp(vg->range->name, BYT_SCORE_ACPI_UID) &&
offset >= 92 && offset <= 93)
return true;
/* SUS pin 11-21 */
if (!strcmp(vg->range->name, BYT_SUS_ACPI_UID) &&
offset >= 11 && offset <= 21)
return true;
return false;
}
static int byt_gpio_request(struct gpio_chip *chip, unsigned offset)
{
struct byt_gpio *vg = to_byt_gpio(chip);
void __iomem *reg = byt_gpio_reg(chip, offset, BYT_CONF0_REG);
u32 value;
bool special;
/*
* In most cases, func pin mux 000 means GPIO function.
* But, some pins may have func pin mux 001 represents
* GPIO function. Only allow user to export pin with
* func pin mux preset as GPIO function by BIOS/FW.
*/
value = readl(reg) & BYT_PIN_MUX;
special = is_special_pin(vg, offset);
if ((special && value != 1) || (!special && value)) {
dev_err(&vg->pdev->dev,
"pin %u cannot be used as GPIO.\n", offset);
return -EINVAL;
}
pm_runtime_get(&vg->pdev->dev);
return 0;
}
static void byt_gpio_free(struct gpio_chip *chip, unsigned offset)
{
struct byt_gpio *vg = to_byt_gpio(chip);
void __iomem *reg = byt_gpio_reg(&vg->chip, offset, BYT_CONF0_REG);
u32 value;
/* clear interrupt triggering */
value = readl(reg);
value &= ~(BYT_TRIG_POS | BYT_TRIG_NEG | BYT_TRIG_LVL);
writel(value, reg);
pm_runtime_put(&vg->pdev->dev);
}
static int byt_irq_type(struct irq_data *d, unsigned type)
{
struct byt_gpio *vg = to_byt_gpio(irq_data_get_irq_chip_data(d));
u32 offset = irqd_to_hwirq(d);
u32 value;
unsigned long flags;
void __iomem *reg = byt_gpio_reg(&vg->chip, offset, BYT_CONF0_REG);
if (offset >= vg->chip.ngpio)
return -EINVAL;
spin_lock_irqsave(&vg->lock, flags);
value = readl(reg);
/* For level trigges the BYT_TRIG_POS and BYT_TRIG_NEG bits
* are used to indicate high and low level triggering
*/
value &= ~(BYT_TRIG_POS | BYT_TRIG_NEG | BYT_TRIG_LVL);
switch (type) {
case IRQ_TYPE_LEVEL_HIGH:
value |= BYT_TRIG_LVL;
case IRQ_TYPE_EDGE_RISING:
value |= BYT_TRIG_POS;
break;
case IRQ_TYPE_LEVEL_LOW:
value |= BYT_TRIG_LVL;
case IRQ_TYPE_EDGE_FALLING:
value |= BYT_TRIG_NEG;
break;
case IRQ_TYPE_EDGE_BOTH:
value |= (BYT_TRIG_NEG | BYT_TRIG_POS);
break;
}
writel(value, reg);
spin_unlock_irqrestore(&vg->lock, flags);
return 0;
}
static int byt_gpio_get(struct gpio_chip *chip, unsigned offset)
{
void __iomem *reg = byt_gpio_reg(chip, offset, BYT_VAL_REG);
return readl(reg) & BYT_LEVEL;
}
static void byt_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
struct byt_gpio *vg = to_byt_gpio(chip);
void __iomem *reg = byt_gpio_reg(chip, offset, BYT_VAL_REG);
unsigned long flags;
u32 old_val;
spin_lock_irqsave(&vg->lock, flags);
old_val = readl(reg);
if (value)
writel(old_val | BYT_LEVEL, reg);
else
writel(old_val & ~BYT_LEVEL, reg);
spin_unlock_irqrestore(&vg->lock, flags);
}
static int byt_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
struct byt_gpio *vg = to_byt_gpio(chip);
void __iomem *reg = byt_gpio_reg(chip, offset, BYT_VAL_REG);
unsigned long flags;
u32 value;
spin_lock_irqsave(&vg->lock, flags);
value = readl(reg) | BYT_DIR_MASK;
value &= ~BYT_INPUT_EN; /* active low */
writel(value, reg);
spin_unlock_irqrestore(&vg->lock, flags);
return 0;
}
static int byt_gpio_direction_output(struct gpio_chip *chip,
unsigned gpio, int value)
{
struct byt_gpio *vg = to_byt_gpio(chip);
void __iomem *conf_reg = byt_gpio_reg(chip, gpio, BYT_CONF0_REG);
void __iomem *reg = byt_gpio_reg(chip, gpio, BYT_VAL_REG);
unsigned long flags;
u32 reg_val;
spin_lock_irqsave(&vg->lock, flags);
/*
* Before making any direction modifications, do a check if gpio
* is set for direct IRQ. On baytrail, setting GPIO to output does
* not make sense, so let's at least warn the caller before they shoot
* themselves in the foot.
*/
WARN(readl(conf_reg) & BYT_DIRECT_IRQ_EN,
"Potential Error: Setting GPIO with direct_irq_en to output");
reg_val = readl(reg) | BYT_DIR_MASK;
reg_val &= ~BYT_OUTPUT_EN;
if (value)
writel(reg_val | BYT_LEVEL, reg);
else
writel(reg_val & ~BYT_LEVEL, reg);
spin_unlock_irqrestore(&vg->lock, flags);
return 0;
}
static void byt_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
{
struct byt_gpio *vg = to_byt_gpio(chip);
int i;
unsigned long flags;
u32 conf0, val, offs;
spin_lock_irqsave(&vg->lock, flags);
for (i = 0; i < vg->chip.ngpio; i++) {
const char *pull_str = NULL;
const char *pull = NULL;
const char *label;
offs = vg->range->pins[i] * 16;
conf0 = readl(vg->reg_base + offs + BYT_CONF0_REG);
val = readl(vg->reg_base + offs + BYT_VAL_REG);
label = gpiochip_is_requested(chip, i);
if (!label)
label = "Unrequested";
switch (conf0 & BYT_PULL_ASSIGN_MASK) {
case BYT_PULL_ASSIGN_UP:
pull = "up";
break;
case BYT_PULL_ASSIGN_DOWN:
pull = "down";
break;
}
switch (conf0 & BYT_PULL_STR_MASK) {
case BYT_PULL_STR_2K:
pull_str = "2k";
break;
case BYT_PULL_STR_10K:
pull_str = "10k";
break;
case BYT_PULL_STR_20K:
pull_str = "20k";
break;
case BYT_PULL_STR_40K:
pull_str = "40k";
break;
}
seq_printf(s,
" gpio-%-3d (%-20.20s) %s %s %s pad-%-3d offset:0x%03x mux:%d %s%s%s",
i,
label,
val & BYT_INPUT_EN ? " " : "in",
val & BYT_OUTPUT_EN ? " " : "out",
val & BYT_LEVEL ? "hi" : "lo",
vg->range->pins[i], offs,
conf0 & 0x7,
conf0 & BYT_TRIG_NEG ? " fall" : " ",
conf0 & BYT_TRIG_POS ? " rise" : " ",
conf0 & BYT_TRIG_LVL ? " level" : " ");
if (pull && pull_str)
seq_printf(s, " %-4s %-3s", pull, pull_str);
else
seq_puts(s, " ");
if (conf0 & BYT_IODEN)
seq_puts(s, " open-drain");
seq_puts(s, "\n");
}
spin_unlock_irqrestore(&vg->lock, flags);
}
static void byt_gpio_irq_handler(unsigned irq, struct irq_desc *desc)
{
struct irq_data *data = irq_desc_get_irq_data(desc);
struct byt_gpio *vg = to_byt_gpio(irq_desc_get_handler_data(desc));
struct irq_chip *chip = irq_data_get_irq_chip(data);
u32 base, pin, mask;
void __iomem *reg;
u32 pending;
unsigned virq;
int looplimit = 0;
/* check from GPIO controller which pin triggered the interrupt */
for (base = 0; base < vg->chip.ngpio; base += 32) {
reg = byt_gpio_reg(&vg->chip, base, BYT_INT_STAT_REG);
while ((pending = readl(reg))) {
pin = __ffs(pending);
mask = BIT(pin);
/* Clear before handling so we can't lose an edge */
writel(mask, reg);
virq = irq_find_mapping(vg->chip.irqdomain, base + pin);
generic_handle_irq(virq);
/* In case bios or user sets triggering incorretly a pin
* might remain in "interrupt triggered" state.
*/
if (looplimit++ > 32) {
dev_err(&vg->pdev->dev,
"Gpio %d interrupt flood, disabling\n",
base + pin);
reg = byt_gpio_reg(&vg->chip, base + pin,
BYT_CONF0_REG);
mask = readl(reg);
mask &= ~(BYT_TRIG_NEG | BYT_TRIG_POS |
BYT_TRIG_LVL);
writel(mask, reg);
mask = readl(reg); /* flush */
break;
}
}
}
chip->irq_eoi(data);
}
static void byt_irq_unmask(struct irq_data *d)
{
}
static void byt_irq_mask(struct irq_data *d)
{
}
static struct irq_chip byt_irqchip = {
.name = "BYT-GPIO",
.irq_mask = byt_irq_mask,
.irq_unmask = byt_irq_unmask,
.irq_set_type = byt_irq_type,
.flags = IRQCHIP_SKIP_SET_WAKE,
};
static void byt_gpio_irq_init_hw(struct byt_gpio *vg)
{
void __iomem *reg;
u32 base, value;
/* clear interrupt status trigger registers */
for (base = 0; base < vg->chip.ngpio; base += 32) {
reg = byt_gpio_reg(&vg->chip, base, BYT_INT_STAT_REG);
writel(0xffffffff, reg);
/* make sure trigger bits are cleared, if not then a pin
might be misconfigured in bios */
value = readl(reg);
if (value)
dev_err(&vg->pdev->dev,
"GPIO interrupt error, pins misconfigured\n");
}
}
static int byt_gpio_probe(struct platform_device *pdev)
{
struct byt_gpio *vg;
struct gpio_chip *gc;
struct resource *mem_rc, *irq_rc;
struct device *dev = &pdev->dev;
struct acpi_device *acpi_dev;
struct pinctrl_gpio_range *range;
acpi_handle handle = ACPI_HANDLE(dev);
int ret;
if (acpi_bus_get_device(handle, &acpi_dev))
return -ENODEV;
vg = devm_kzalloc(dev, sizeof(struct byt_gpio), GFP_KERNEL);
if (!vg) {
dev_err(&pdev->dev, "can't allocate byt_gpio chip data\n");
return -ENOMEM;
}
for (range = byt_ranges; range->name; range++) {
if (!strcmp(acpi_dev->pnp.unique_id, range->name)) {
vg->chip.ngpio = range->npins;
vg->range = range;
break;
}
}
if (!vg->chip.ngpio || !vg->range)
return -ENODEV;
vg->pdev = pdev;
platform_set_drvdata(pdev, vg);
mem_rc = platform_get_resource(pdev, IORESOURCE_MEM, 0);
vg->reg_base = devm_ioremap_resource(dev, mem_rc);
if (IS_ERR(vg->reg_base))
return PTR_ERR(vg->reg_base);
spin_lock_init(&vg->lock);
gc = &vg->chip;
gc->label = dev_name(&pdev->dev);
gc->owner = THIS_MODULE;
gc->request = byt_gpio_request;
gc->free = byt_gpio_free;
gc->direction_input = byt_gpio_direction_input;
gc->direction_output = byt_gpio_direction_output;
gc->get = byt_gpio_get;
gc->set = byt_gpio_set;
gc->dbg_show = byt_gpio_dbg_show;
gc->base = -1;
gc->can_sleep = false;
gc->dev = dev;
ret = gpiochip_add(gc);
if (ret) {
dev_err(&pdev->dev, "failed adding byt-gpio chip\n");
return ret;
}
/* set up interrupts */
irq_rc = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (irq_rc && irq_rc->start) {
byt_gpio_irq_init_hw(vg);
ret = gpiochip_irqchip_add(gc, &byt_irqchip, 0,
handle_simple_irq, IRQ_TYPE_NONE);
if (ret) {
dev_err(dev, "failed to add irqchip\n");
gpiochip_remove(gc);
return ret;
}
gpiochip_set_chained_irqchip(gc, &byt_irqchip,
(unsigned)irq_rc->start,
byt_gpio_irq_handler);
}
pm_runtime_enable(dev);
return 0;
}
static int byt_gpio_runtime_suspend(struct device *dev)
{
return 0;
}
static int byt_gpio_runtime_resume(struct device *dev)
{
return 0;
}
static const struct dev_pm_ops byt_gpio_pm_ops = {
.runtime_suspend = byt_gpio_runtime_suspend,
.runtime_resume = byt_gpio_runtime_resume,
};
static const struct acpi_device_id byt_gpio_acpi_match[] = {
{ "INT33B2", 0 },
{ "INT33FC", 0 },
{ }
};
MODULE_DEVICE_TABLE(acpi, byt_gpio_acpi_match);
static int byt_gpio_remove(struct platform_device *pdev)
{
struct byt_gpio *vg = platform_get_drvdata(pdev);
pm_runtime_disable(&pdev->dev);
gpiochip_remove(&vg->chip);
return 0;
}
static struct platform_driver byt_gpio_driver = {
.probe = byt_gpio_probe,
.remove = byt_gpio_remove,
.driver = {
.name = "byt_gpio",
.owner = THIS_MODULE,
.pm = &byt_gpio_pm_ops,
.acpi_match_table = ACPI_PTR(byt_gpio_acpi_match),
},
};
static int __init byt_gpio_init(void)
{
return platform_driver_register(&byt_gpio_driver);
}
subsys_initcall(byt_gpio_init);