OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
linux/include/asm-powerpc/kexec.h

67 lines
1.7 KiB
C
Raw Normal View History

powerpc: Merge asm-ppc/kexec.h and asm-ppc64/kexec.h Merge include/asm-ppc/kexec.h and include/asm-ppc64/kexec.h. The only thing that's really changed is that we now allocate crash_notes properly on PPC32. It's address is exported via sysfs, so it's not correct for it to be a pointer. I've also removed some of the "we don't use this" comments, because they're wrong (or perhaps were referring only to arch code). Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 05:35:45 +01:00
#ifndef _ASM_POWERPC_KEXEC_H
#define _ASM_POWERPC_KEXEC_H
[PATCH] powerpc: sanitize header files for user space includes include/asm-ppc/ had #ifdef __KERNEL__ in all header files that are not meant for use by user space, include/asm-powerpc does not have this yet. This patch gets us a lot closer there. There are a few cases where I was not sure, so I left them out. I have verified that no CONFIG_* symbols are used outside of __KERNEL__ any more and that there are no obvious compile errors when including any of the headers in user space libraries. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-16 22:43:46 +01:00
#ifdef __KERNEL__
powerpc: Merge asm-ppc/kexec.h and asm-ppc64/kexec.h Merge include/asm-ppc/kexec.h and include/asm-ppc64/kexec.h. The only thing that's really changed is that we now allocate crash_notes properly on PPC32. It's address is exported via sysfs, so it's not correct for it to be a pointer. I've also removed some of the "we don't use this" comments, because they're wrong (or perhaps were referring only to arch code). Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 05:35:45 +01:00
/*
* Maximum page that is mapped directly into kernel memory.
* XXX: Since we copy virt we can use any page we allocate
*/
#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
/*
* Maximum address we can reach in physical address mode.
* XXX: I want to allow initrd in highmem. Otherwise set to rmo on LPAR.
*/
#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
/* Maximum address we can use for the control code buffer */
#ifdef __powerpc64__
#define KEXEC_CONTROL_MEMORY_LIMIT (-1UL)
#else
/* TASK_SIZE, probably left over from use_mm ?? */
#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
#endif
#define KEXEC_CONTROL_CODE_SIZE 4096
/* The native architecture */
#ifdef __powerpc64__
#define KEXEC_ARCH KEXEC_ARCH_PPC64
#else
#define KEXEC_ARCH KEXEC_ARCH_PPC
#endif
[PATCH] powerpc: Add arch-dependent copy_oldmem_page Signed-off-by: Haren Myneni <haren@us.ibm.com> Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-04 08:39:51 +01:00
#define HAVE_ARCH_COPY_OLDMEM_PAGE
powerpc: Merge asm-ppc/kexec.h and asm-ppc64/kexec.h Merge include/asm-ppc/kexec.h and include/asm-ppc64/kexec.h. The only thing that's really changed is that we now allocate crash_notes properly on PPC32. It's address is exported via sysfs, so it's not correct for it to be a pointer. I've also removed some of the "we don't use this" comments, because they're wrong (or perhaps were referring only to arch code). Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 05:35:45 +01:00
#ifndef __ASSEMBLY__
[PATCH] powerpc: Add arch dependent basic infrastructure for Kdump. Implementing the machine_crash_shutdown which will be called by crash_kexec (called in case of a panic, sysrq etc.). Disable the interrupts, shootdown cpus using debugger IPI and collect regs for all CPUs. elfcorehdr= specifies the location of elf core header stored by the crashed kernel. This command line option will be passed by the kexec-tools to capture kernel. savemaxmem= specifies the actual memory size that the first kernel has and this value will be used for dumping in the capture kernel. This command line option will be passed by the kexec-tools to capture kernel. Signed-off-by: Haren Myneni <haren@us.ibm.com> Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-04 08:39:43 +01:00
#ifdef CONFIG_KEXEC
powerpc: Merge asm-ppc/kexec.h and asm-ppc64/kexec.h Merge include/asm-ppc/kexec.h and include/asm-ppc64/kexec.h. The only thing that's really changed is that we now allocate crash_notes properly on PPC32. It's address is exported via sysfs, so it's not correct for it to be a pointer. I've also removed some of the "we don't use this" comments, because they're wrong (or perhaps were referring only to arch code). Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 05:35:45 +01:00
#define MAX_NOTE_BYTES 1024
#ifdef __powerpc64__
extern void kexec_smp_wait(void); /* get and clear naca physid, wait for
master to copy new code to 0 */
[PATCH] powerpc: Export htab start/end via device tree The userspace kexec-tools need to know the location of the htab on non-lpar machines, as well as the end of the kernel. Export via the device tree. NB. This patch has been updated to use "linux,x" property names. You may need to update your kexec-tools to match. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-11 14:06:06 +01:00
extern void __init kexec_setup(void);
[PATCH] powerpc: Add arch dependent basic infrastructure for Kdump. Implementing the machine_crash_shutdown which will be called by crash_kexec (called in case of a panic, sysrq etc.). Disable the interrupts, shootdown cpus using debugger IPI and collect regs for all CPUs. elfcorehdr= specifies the location of elf core header stored by the crashed kernel. This command line option will be passed by the kexec-tools to capture kernel. savemaxmem= specifies the actual memory size that the first kernel has and this value will be used for dumping in the capture kernel. This command line option will be passed by the kexec-tools to capture kernel. Signed-off-by: Haren Myneni <haren@us.ibm.com> Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-04 08:39:43 +01:00
extern int crashing_cpu;
extern void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *));
#endif /* __powerpc64 __ */
powerpc: Merge asm-ppc/kexec.h and asm-ppc64/kexec.h Merge include/asm-ppc/kexec.h and include/asm-ppc64/kexec.h. The only thing that's really changed is that we now allocate crash_notes properly on PPC32. It's address is exported via sysfs, so it's not correct for it to be a pointer. I've also removed some of the "we don't use this" comments, because they're wrong (or perhaps were referring only to arch code). Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 05:35:45 +01:00
[PATCH] powerpc: Merge kexec This patch merges, to some extent, the PPC32 and PPC64 kexec implementations. We adopt the PPC32 approach of having ppc_md callbacks for the kexec functions. The current PPC64 implementation becomes the "default" implementation for PPC64 which platforms can select if they need no special treatment. I've added these default callbacks to pseries/maple/cell/powermac, this means iSeries no longer supports kexec - but it never worked anyway. I've renamed PPC32's machine_kexec_simple to default_machine_kexec, inline with PPC64. Judging by the comments it might be better named machine_kexec_non_of, or something, but at the moment it's the only implementation for PPC32 so it's the "default". Kexec requires machine_shutdown(), which is in machine_kexec.c on PPC32, but we already have in setup-common.c on powerpc. All this does is call ppc_md.nvram_sync, which only powermac implements, so instead make machine_shutdown a ppc_md member and have it call core99_nvram_sync directly on powermac. I've also stuck relocate_kernel.S into misc_32.S for powerpc. Built for ARCH=ppc, and 32 & 64 bit ARCH=powerpc, with KEXEC=y/n. Booted on P5 LPAR and successfully kexec'ed. Should apply on top of 493f25ef4087395891c99fcfe2c72e62e293e89f. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-14 13:35:00 +01:00
struct kimage;
[PATCH] powerpc: Add arch dependent basic infrastructure for Kdump. Implementing the machine_crash_shutdown which will be called by crash_kexec (called in case of a panic, sysrq etc.). Disable the interrupts, shootdown cpus using debugger IPI and collect regs for all CPUs. elfcorehdr= specifies the location of elf core header stored by the crashed kernel. This command line option will be passed by the kexec-tools to capture kernel. savemaxmem= specifies the actual memory size that the first kernel has and this value will be used for dumping in the capture kernel. This command line option will be passed by the kexec-tools to capture kernel. Signed-off-by: Haren Myneni <haren@us.ibm.com> Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-04 08:39:43 +01:00
struct pt_regs;
[PATCH] powerpc: Merge kexec This patch merges, to some extent, the PPC32 and PPC64 kexec implementations. We adopt the PPC32 approach of having ppc_md callbacks for the kexec functions. The current PPC64 implementation becomes the "default" implementation for PPC64 which platforms can select if they need no special treatment. I've added these default callbacks to pseries/maple/cell/powermac, this means iSeries no longer supports kexec - but it never worked anyway. I've renamed PPC32's machine_kexec_simple to default_machine_kexec, inline with PPC64. Judging by the comments it might be better named machine_kexec_non_of, or something, but at the moment it's the only implementation for PPC32 so it's the "default". Kexec requires machine_shutdown(), which is in machine_kexec.c on PPC32, but we already have in setup-common.c on powerpc. All this does is call ppc_md.nvram_sync, which only powermac implements, so instead make machine_shutdown a ppc_md member and have it call core99_nvram_sync directly on powermac. I've also stuck relocate_kernel.S into misc_32.S for powerpc. Built for ARCH=ppc, and 32 & 64 bit ARCH=powerpc, with KEXEC=y/n. Booted on P5 LPAR and successfully kexec'ed. Should apply on top of 493f25ef4087395891c99fcfe2c72e62e293e89f. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-14 13:35:00 +01:00
extern void default_machine_kexec(struct kimage *image);
extern int default_machine_kexec_prepare(struct kimage *image);
[PATCH] powerpc: Add arch dependent basic infrastructure for Kdump. Implementing the machine_crash_shutdown which will be called by crash_kexec (called in case of a panic, sysrq etc.). Disable the interrupts, shootdown cpus using debugger IPI and collect regs for all CPUs. elfcorehdr= specifies the location of elf core header stored by the crashed kernel. This command line option will be passed by the kexec-tools to capture kernel. savemaxmem= specifies the actual memory size that the first kernel has and this value will be used for dumping in the capture kernel. This command line option will be passed by the kexec-tools to capture kernel. Signed-off-by: Haren Myneni <haren@us.ibm.com> Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-04 08:39:43 +01:00
extern void default_machine_crash_shutdown(struct pt_regs *regs);
#endif /* !CONFIG_KEXEC */
[PATCH] powerpc: Merge kexec This patch merges, to some extent, the PPC32 and PPC64 kexec implementations. We adopt the PPC32 approach of having ppc_md callbacks for the kexec functions. The current PPC64 implementation becomes the "default" implementation for PPC64 which platforms can select if they need no special treatment. I've added these default callbacks to pseries/maple/cell/powermac, this means iSeries no longer supports kexec - but it never worked anyway. I've renamed PPC32's machine_kexec_simple to default_machine_kexec, inline with PPC64. Judging by the comments it might be better named machine_kexec_non_of, or something, but at the moment it's the only implementation for PPC32 so it's the "default". Kexec requires machine_shutdown(), which is in machine_kexec.c on PPC32, but we already have in setup-common.c on powerpc. All this does is call ppc_md.nvram_sync, which only powermac implements, so instead make machine_shutdown a ppc_md member and have it call core99_nvram_sync directly on powermac. I've also stuck relocate_kernel.S into misc_32.S for powerpc. Built for ARCH=ppc, and 32 & 64 bit ARCH=powerpc, with KEXEC=y/n. Booted on P5 LPAR and successfully kexec'ed. Should apply on top of 493f25ef4087395891c99fcfe2c72e62e293e89f. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-14 13:35:00 +01:00
[PATCH] Kdump: powerpc and s390 build failure fix ) From: Vivek Goyal <vgoyal@in.ibm.com> crash_setup_regs() is an architecture dependent function which is called in architecture independent section. So every architecture supporting kexec should at least provide a dummy definition of crash_setup_regs() even if crash dumping is not implemented yet, to avoid build failures. Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 05:51:45 +01:00
/*
* Provide a dummy definition to avoid build failures. Will remain
* empty till crash dump support is enabled.
*/
static inline void crash_setup_regs(struct pt_regs *newregs,
struct pt_regs *oldregs) { }
powerpc: Merge asm-ppc/kexec.h and asm-ppc64/kexec.h Merge include/asm-ppc/kexec.h and include/asm-ppc64/kexec.h. The only thing that's really changed is that we now allocate crash_notes properly on PPC32. It's address is exported via sysfs, so it's not correct for it to be a pointer. I've also removed some of the "we don't use this" comments, because they're wrong (or perhaps were referring only to arch code). Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 05:35:45 +01:00
#endif /* ! __ASSEMBLY__ */
[PATCH] powerpc: sanitize header files for user space includes include/asm-ppc/ had #ifdef __KERNEL__ in all header files that are not meant for use by user space, include/asm-powerpc does not have this yet. This patch gets us a lot closer there. There are a few cases where I was not sure, so I left them out. I have verified that no CONFIG_* symbols are used outside of __KERNEL__ any more and that there are no obvious compile errors when including any of the headers in user space libraries. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-16 22:43:46 +01:00
#endif /* __KERNEL__ */
powerpc: Merge asm-ppc/kexec.h and asm-ppc64/kexec.h Merge include/asm-ppc/kexec.h and include/asm-ppc64/kexec.h. The only thing that's really changed is that we now allocate crash_notes properly on PPC32. It's address is exported via sysfs, so it's not correct for it to be a pointer. I've also removed some of the "we don't use this" comments, because they're wrong (or perhaps were referring only to arch code). Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 05:35:45 +01:00
#endif /* _ASM_POWERPC_KEXEC_H */