linux/arch/powerpc/kernel/setup_32.c

348 lines
8.1 KiB
C
Raw Normal View History

/*
* Common prep/pmac/chrp boot and setup code.
*/
#include <linux/module.h>
#include <linux/string.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/reboot.h>
#include <linux/delay.h>
#include <linux/initrd.h>
#include <linux/tty.h>
#include <linux/bootmem.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/cpu.h>
#include <linux/console.h>
#include <linux/memblock.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/processor.h>
#include <asm/pgtable.h>
#include <asm/setup.h>
#include <asm/smp.h>
#include <asm/elf.h>
#include <asm/cputable.h>
#include <asm/bootx.h>
#include <asm/btext.h>
#include <asm/machdep.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/pmac_feature.h>
#include <asm/sections.h>
#include <asm/nvram.h>
#include <asm/xmon.h>
#include <asm/time.h>
#include <asm/serial.h>
#include <asm/udbg.h>
#include <asm/mmu_context.h>
#include "setup.h"
#define DBG(fmt...)
extern void bootx_init(unsigned long r4, unsigned long phys);
int boot_cpuid = -1;
EXPORT_SYMBOL_GPL(boot_cpuid);
int boot_cpuid_phys;
int smp_hw_index[NR_CPUS];
unsigned long ISA_DMA_THRESHOLD;
unsigned int DMA_MODE_READ;
unsigned int DMA_MODE_WRITE;
#ifdef CONFIG_VGA_CONSOLE
unsigned long vgacon_remap_base;
EXPORT_SYMBOL(vgacon_remap_base);
#endif
/*
* These are used in binfmt_elf.c to put aux entries on the stack
* for each elf executable being started.
*/
int dcache_bsize;
int icache_bsize;
int ucache_bsize;
/*
* We're called here very early in the boot. We determine the machine
* type and call the appropriate low-level setup functions.
* -- Cort <cort@fsmlabs.com>
*
* Note that the kernel may be running at an address which is different
* from the address that it was linked at, so we must use RELOC/PTRRELOC
* to access static data (including strings). -- paulus
*/
notrace unsigned long __init early_init(unsigned long dt_ptr)
{
unsigned long offset = reloc_offset();
struct cpu_spec *spec;
/* First zero the BSS -- use memset_io, some platforms don't have
* caches on yet */
memset_io((void __iomem *)PTRRELOC(&__bss_start), 0,
__bss_stop - __bss_start);
/*
* Identify the CPU type and fix up code sections
* that depend on which cpu we have.
*/
spec = identify_cpu(offset, mfspr(SPRN_PVR));
[POWERPC] Support feature fixups in vdso's This patch reworks the feature fixup mecanism so vdso's can be fixed up. The main issue was that the construct: .long label (or .llong on 64 bits) will not work in the case of a shared library like the vdso. It will generate an empty placeholder in the fixup table along with a reloc, which is not something we can deal with in the vdso. The idea here (thanks Alan Modra !) is to instead use something like: 1: .long label - 1b That is, the feature fixup tables no longer contain addresses of bits of code to patch, but offsets of such code from the fixup table entry itself. That is properly resolved by ld when building the .so's. I've modified the fixup mecanism generically to use that method for the rest of the kernel as well. Another trick is that the 32 bits vDSO included in the 64 bits kernel need to have a table in the 64 bits format. However, gas does not support 32 bits code with a statement of the form: .llong label - 1b (Or even just .llong label) That is, it cannot emit the right fixup/relocation for the linker to use to assign a 32 bits address to an .llong field. Thus, in the specific case of the 32 bits vdso built as part of the 64 bits kernel, we are using a modified macro that generates: .long 0xffffffff .llong label - 1b Note that is assumes that the value is negative which is enforced by the .lds (those offsets are always negative as the .text is always before the fixup table and gas doesn't support emiting the reloc the other way around). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-20 03:47:18 +02:00
do_feature_fixups(spec->cpu_features,
PTRRELOC(&__start___ftr_fixup),
PTRRELOC(&__stop___ftr_fixup));
do_feature_fixups(spec->mmu_features,
PTRRELOC(&__start___mmu_ftr_fixup),
PTRRELOC(&__stop___mmu_ftr_fixup));
do_lwsync_fixups(spec->cpu_features,
PTRRELOC(&__start___lwsync_fixup),
PTRRELOC(&__stop___lwsync_fixup));
return KERNELBASE + offset;
}
/*
* Find out what kind of machine we're on and save any data we need
* from the early boot process (devtree is copied on pmac by prom_init()).
* This is called very early on the boot process, after a minimal
* MMU environment has been set up but before MMU_init is called.
*/
notrace void __init machine_init(unsigned long dt_ptr)
{
lockdep_init();
/* Enable early debugging if any specified (see udbg.h) */
udbg_early_init();
/* Do some early initialization based on the flat device tree */
early_init_devtree(__va(dt_ptr));
probe_machine();
setup_kdump_trampoline();
#ifdef CONFIG_6xx
if (cpu_has_feature(CPU_FTR_CAN_DOZE) ||
cpu_has_feature(CPU_FTR_CAN_NAP))
ppc_md.power_save = ppc6xx_idle;
#endif
#ifdef CONFIG_E500
if (cpu_has_feature(CPU_FTR_CAN_DOZE) ||
cpu_has_feature(CPU_FTR_CAN_NAP))
ppc_md.power_save = e500_idle;
#endif
if (ppc_md.progress)
ppc_md.progress("id mach(): done", 0x200);
}
#ifdef CONFIG_BOOKE_WDT
/* Checks wdt=x and wdt_period=xx command-line option */
notrace int __init early_parse_wdt(char *p)
{
if (p && strncmp(p, "0", 1) != 0)
booke_wdt_enabled = 1;
return 0;
}
early_param("wdt", early_parse_wdt);
int __init early_parse_wdt_period (char *p)
{
if (p)
booke_wdt_period = simple_strtoul(p, NULL, 0);
return 0;
}
early_param("wdt_period", early_parse_wdt_period);
#endif /* CONFIG_BOOKE_WDT */
/* Checks "l2cr=xxxx" command-line option */
int __init ppc_setup_l2cr(char *str)
{
if (cpu_has_feature(CPU_FTR_L2CR)) {
unsigned long val = simple_strtoul(str, NULL, 0);
printk(KERN_INFO "l2cr set to %lx\n", val);
_set_L2CR(0); /* force invalidate by disable cache */
_set_L2CR(val); /* and enable it */
}
return 1;
}
__setup("l2cr=", ppc_setup_l2cr);
/* Checks "l3cr=xxxx" command-line option */
int __init ppc_setup_l3cr(char *str)
{
if (cpu_has_feature(CPU_FTR_L3CR)) {
unsigned long val = simple_strtoul(str, NULL, 0);
printk(KERN_INFO "l3cr set to %lx\n", val);
_set_L3CR(val); /* and enable it */
}
return 1;
}
__setup("l3cr=", ppc_setup_l3cr);
#ifdef CONFIG_GENERIC_NVRAM
/* Generic nvram hooks used by drivers/char/gen_nvram.c */
unsigned char nvram_read_byte(int addr)
{
if (ppc_md.nvram_read_val)
return ppc_md.nvram_read_val(addr);
return 0xff;
}
EXPORT_SYMBOL(nvram_read_byte);
void nvram_write_byte(unsigned char val, int addr)
{
if (ppc_md.nvram_write_val)
ppc_md.nvram_write_val(addr, val);
}
EXPORT_SYMBOL(nvram_write_byte);
ssize_t nvram_get_size(void)
{
if (ppc_md.nvram_size)
return ppc_md.nvram_size();
return -1;
}
EXPORT_SYMBOL(nvram_get_size);
void nvram_sync(void)
{
if (ppc_md.nvram_sync)
ppc_md.nvram_sync();
}
EXPORT_SYMBOL(nvram_sync);
#endif /* CONFIG_NVRAM */
int __init ppc_init(void)
{
/* clear the progress line */
if (ppc_md.progress)
ppc_md.progress(" ", 0xffff);
/* call platform init */
if (ppc_md.init != NULL) {
ppc_md.init();
}
return 0;
}
arch_initcall(ppc_init);
static void __init irqstack_early_init(void)
{
unsigned int i;
/* interrupt stacks must be in lowmem, we get that for free on ppc32
* as the memblock is limited to lowmem by default */
for_each_possible_cpu(i) {
softirq_ctx[i] = (struct thread_info *)
__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
hardirq_ctx[i] = (struct thread_info *)
__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
}
}
#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
static void __init exc_lvl_early_init(void)
{
unsigned int i, hw_cpu;
/* interrupt stacks must be in lowmem, we get that for free on ppc32
* as the memblock is limited to lowmem by MEMBLOCK_REAL_LIMIT */
for_each_possible_cpu(i) {
hw_cpu = get_hard_smp_processor_id(i);
critirq_ctx[hw_cpu] = (struct thread_info *)
__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
#ifdef CONFIG_BOOKE
dbgirq_ctx[hw_cpu] = (struct thread_info *)
__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
mcheckirq_ctx[hw_cpu] = (struct thread_info *)
__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
#endif
}
}
#else
#define exc_lvl_early_init()
#endif
/* Warning, IO base is not yet inited */
void __init setup_arch(char **cmdline_p)
{
*cmdline_p = cmd_line;
/* so udelay does something sensible, assume <= 1000 bogomips */
loops_per_jiffy = 500000000 / HZ;
unflatten_device_tree();
check_for_initrd();
if (ppc_md.init_early)
ppc_md.init_early();
find_legacy_serial_ports();
smp_setup_cpu_maps();
/* Register early console */
register_early_udbg_console();
xmon_setup();
/*
* Set cache line size based on type of cpu as a default.
* Systems with OF can look in the properties on the cpu node(s)
* for a possibly more accurate value.
*/
dcache_bsize = cur_cpu_spec->dcache_bsize;
icache_bsize = cur_cpu_spec->icache_bsize;
ucache_bsize = 0;
if (cpu_has_feature(CPU_FTR_UNIFIED_ID_CACHE))
ucache_bsize = icache_bsize = dcache_bsize;
/* reboot on panic */
panic_timeout = 180;
if (ppc_md.panic)
setup_panic();
init_mm.start_code = (unsigned long)_stext;
init_mm.end_code = (unsigned long) _etext;
init_mm.end_data = (unsigned long) _edata;
init_mm.brk = klimit;
exc_lvl_early_init();
irqstack_early_init();
/* set up the bootmem stuff with available memory */
do_init_bootmem();
if ( ppc_md.progress ) ppc_md.progress("setup_arch: bootmem", 0x3eab);
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
#endif
if (ppc_md.setup_arch)
ppc_md.setup_arch();
if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab);
paging_init();
/* Initialize the MMU context management stuff */
mmu_context_init();
}