linux/arch/arm/mach-ixp2000/ixdp2x01.c

422 lines
11 KiB
C
Raw Normal View History

/*
* arch/arm/mach-ixp2000/ixdp2x01.c
*
* Code common to Intel IXDP2401 and IXDP2801 platforms
*
* Original Author: Andrzej Mialkowski <andrzej.mialkowski@intel.com>
* Maintainer: Deepak Saxena <dsaxena@plexity.net>
*
* Copyright (C) 2002-2003 Intel Corp.
* Copyright (C) 2003-2004 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/bitops.h>
#include <linux/pci.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/system.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/pci.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
/*************************************************************************
* IXDP2x01 IRQ Handling
*************************************************************************/
static void ixdp2x01_irq_mask(unsigned int irq)
{
ixp2000_reg_wrb(IXDP2X01_INT_MASK_SET_REG,
IXP2000_BOARD_IRQ_MASK(irq));
}
static void ixdp2x01_irq_unmask(unsigned int irq)
{
ixp2000_reg_write(IXDP2X01_INT_MASK_CLR_REG,
IXP2000_BOARD_IRQ_MASK(irq));
}
static u32 valid_irq_mask;
static void ixdp2x01_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
{
u32 ex_interrupt;
int i;
desc->chip->mask(irq);
ex_interrupt = *IXDP2X01_INT_STAT_REG & valid_irq_mask;
if (!ex_interrupt) {
printk(KERN_ERR "Spurious IXDP2X01 CPLD interrupt!\n");
return;
}
for (i = 0; i < IXP2000_BOARD_IRQS; i++) {
if (ex_interrupt & (1 << i)) {
struct irqdesc *cpld_desc;
int cpld_irq = IXP2000_BOARD_IRQ(0) + i;
cpld_desc = irq_desc + cpld_irq;
desc_handle_irq(cpld_irq, cpld_desc, regs);
}
}
desc->chip->unmask(irq);
}
static struct irqchip ixdp2x01_irq_chip = {
.mask = ixdp2x01_irq_mask,
.ack = ixdp2x01_irq_mask,
.unmask = ixdp2x01_irq_unmask
};
/*
* We only do anything if we are the master NPU on the board.
* The slave NPU only has the ethernet chip going directly to
* the PCIB interrupt input.
*/
void __init ixdp2x01_init_irq(void)
{
int irq = 0;
/* initialize chip specific interrupts */
ixp2000_init_irq();
if (machine_is_ixdp2401())
valid_irq_mask = IXDP2401_VALID_IRQ_MASK;
else
valid_irq_mask = IXDP2801_VALID_IRQ_MASK;
/* Mask all interrupts from CPLD, disable simulation */
ixp2000_reg_write(IXDP2X01_INT_MASK_SET_REG, 0xffffffff);
ixp2000_reg_wrb(IXDP2X01_INT_SIM_REG, 0);
for (irq = NR_IXP2000_IRQS; irq < NR_IXDP2X01_IRQS; irq++) {
if (irq & valid_irq_mask) {
set_irq_chip(irq, &ixdp2x01_irq_chip);
set_irq_handler(irq, do_level_IRQ);
set_irq_flags(irq, IRQF_VALID);
} else {
set_irq_flags(irq, 0);
}
}
/* Hook into PCI interrupts */
set_irq_chained_handler(IRQ_IXP2000_PCIB, &ixdp2x01_irq_handler);
}
/*************************************************************************
* IXDP2x01 memory map and serial ports
*************************************************************************/
static struct map_desc ixdp2x01_io_desc __initdata = {
.virtual = IXDP2X01_VIRT_CPLD_BASE,
.pfn = __phys_to_pfn(IXDP2X01_PHYS_CPLD_BASE),
.length = IXDP2X01_CPLD_REGION_SIZE,
.type = MT_DEVICE
};
static struct uart_port ixdp2x01_serial_ports[2] = {
{
.membase = (char *)(IXDP2X01_UART1_VIRT_BASE),
.mapbase = (unsigned long)IXDP2X01_UART1_PHYS_BASE,
.irq = IRQ_IXDP2X01_UART1,
.flags = UPF_SKIP_TEST,
.iotype = UPIO_MEM32,
.regshift = 2,
.uartclk = IXDP2X01_UART_CLK,
.line = 1,
.type = PORT_16550A,
.fifosize = 16
}, {
.membase = (char *)(IXDP2X01_UART2_VIRT_BASE),
.mapbase = (unsigned long)IXDP2X01_UART2_PHYS_BASE,
.irq = IRQ_IXDP2X01_UART2,
.flags = UPF_SKIP_TEST,
.iotype = UPIO_MEM32,
.regshift = 2,
.uartclk = IXDP2X01_UART_CLK,
.line = 2,
.type = PORT_16550A,
.fifosize = 16
},
};
static void __init ixdp2x01_map_io(void)
{
ixp2000_map_io();
iotable_init(&ixdp2x01_io_desc, 1);
early_serial_setup(&ixdp2x01_serial_ports[0]);
early_serial_setup(&ixdp2x01_serial_ports[1]);
}
/*************************************************************************
* IXDP2x01 timer tick configuration
*************************************************************************/
static unsigned int ixdp2x01_clock;
static int __init ixdp2x01_clock_setup(char *str)
{
ixdp2x01_clock = simple_strtoul(str, NULL, 10);
return 1;
}
__setup("ixdp2x01_clock=", ixdp2x01_clock_setup);
static void __init ixdp2x01_timer_init(void)
{
if (!ixdp2x01_clock)
ixdp2x01_clock = 50000000;
ixp2000_init_time(ixdp2x01_clock);
}
static struct sys_timer ixdp2x01_timer = {
.init = ixdp2x01_timer_init,
.offset = ixp2000_gettimeoffset,
};
/*************************************************************************
* IXDP2x01 PCI
*************************************************************************/
void __init ixdp2x01_pci_preinit(void)
{
ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00000000);
ixp2000_pci_preinit();
pcibios_setup("firmware");
}
#define DEVPIN(dev, pin) ((pin) | ((dev) << 3))
static int __init ixdp2x01_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
u8 bus = dev->bus->number;
u32 devpin = DEVPIN(PCI_SLOT(dev->devfn), pin);
struct pci_bus *tmp_bus = dev->bus;
/* Primary bus, no interrupts here */
if (bus == 0) {
return -1;
}
/* Lookup first leaf in bus tree */
while ((tmp_bus->parent != NULL) && (tmp_bus->parent->parent != NULL)) {
tmp_bus = tmp_bus->parent;
}
/* Select between known bridges */
switch (tmp_bus->self->devfn | (tmp_bus->self->bus->number << 8)) {
/* Device is located after first MB bridge */
case 0x0008:
if (tmp_bus == dev->bus) {
/* Device is located directy after first MB bridge */
switch (devpin) {
case DEVPIN(1, 1): /* Onboard 82546 ch 0 */
if (machine_is_ixdp2401())
return IRQ_IXDP2401_INTA_82546;
return -1;
case DEVPIN(1, 2): /* Onboard 82546 ch 1 */
if (machine_is_ixdp2401())
return IRQ_IXDP2401_INTB_82546;
return -1;
case DEVPIN(0, 1): /* PMC INTA# */
return IRQ_IXDP2X01_SPCI_PMC_INTA;
case DEVPIN(0, 2): /* PMC INTB# */
return IRQ_IXDP2X01_SPCI_PMC_INTB;
case DEVPIN(0, 3): /* PMC INTC# */
return IRQ_IXDP2X01_SPCI_PMC_INTC;
case DEVPIN(0, 4): /* PMC INTD# */
return IRQ_IXDP2X01_SPCI_PMC_INTD;
}
}
break;
case 0x0010:
if (tmp_bus == dev->bus) {
/* Device is located directy after second MB bridge */
/* Secondary bus of second bridge */
switch (devpin) {
case DEVPIN(0, 1): /* DB#0 */
return IRQ_IXDP2X01_SPCI_DB_0;
case DEVPIN(1, 1): /* DB#1 */
return IRQ_IXDP2X01_SPCI_DB_1;
}
} else {
/* Device is located indirectly after second MB bridge */
/* Not supported now */
}
break;
}
return -1;
}
static int ixdp2x01_pci_setup(int nr, struct pci_sys_data *sys)
{
sys->mem_offset = 0xe0000000;
if (machine_is_ixdp2801() || machine_is_ixdp28x5())
sys->mem_offset -= ((*IXP2000_PCI_ADDR_EXT & 0xE000) << 16);
return ixp2000_pci_setup(nr, sys);
}
struct hw_pci ixdp2x01_pci __initdata = {
.nr_controllers = 1,
.setup = ixdp2x01_pci_setup,
.preinit = ixdp2x01_pci_preinit,
.scan = ixp2000_pci_scan_bus,
.map_irq = ixdp2x01_pci_map_irq,
};
int __init ixdp2x01_pci_init(void)
{
if (machine_is_ixdp2401() || machine_is_ixdp2801() ||\
machine_is_ixdp28x5())
pci_common_init(&ixdp2x01_pci);
return 0;
}
subsys_initcall(ixdp2x01_pci_init);
/*************************************************************************
* IXDP2x01 Machine Intialization
*************************************************************************/
static struct flash_platform_data ixdp2x01_flash_platform_data = {
.map_name = "cfi_probe",
.width = 1,
};
static unsigned long ixdp2x01_flash_bank_setup(unsigned long ofs)
{
ixp2000_reg_wrb(IXDP2X01_CPLD_FLASH_REG,
((ofs >> IXDP2X01_FLASH_WINDOW_BITS) | IXDP2X01_CPLD_FLASH_INTERN));
return (ofs & IXDP2X01_FLASH_WINDOW_MASK);
}
static struct ixp2000_flash_data ixdp2x01_flash_data = {
.platform_data = &ixdp2x01_flash_platform_data,
.bank_setup = ixdp2x01_flash_bank_setup
};
static struct resource ixdp2x01_flash_resource = {
.start = 0xc4000000,
.end = 0xc4000000 + 0x01ffffff,
.flags = IORESOURCE_MEM,
};
static struct platform_device ixdp2x01_flash = {
.name = "IXP2000-Flash",
.id = 0,
.dev = {
.platform_data = &ixdp2x01_flash_data,
},
.num_resources = 1,
.resource = &ixdp2x01_flash_resource,
};
static struct ixp2000_i2c_pins ixdp2x01_i2c_gpio_pins = {
.sda_pin = IXDP2X01_GPIO_SDA,
.scl_pin = IXDP2X01_GPIO_SCL,
};
static struct platform_device ixdp2x01_i2c_controller = {
.name = "IXP2000-I2C",
.id = 0,
.dev = {
.platform_data = &ixdp2x01_i2c_gpio_pins,
},
.num_resources = 0
};
static struct platform_device *ixdp2x01_devices[] __initdata = {
&ixdp2x01_flash,
&ixdp2x01_i2c_controller
};
static void __init ixdp2x01_init_machine(void)
{
ixp2000_reg_wrb(IXDP2X01_CPLD_FLASH_REG,
(IXDP2X01_CPLD_FLASH_BANK_MASK | IXDP2X01_CPLD_FLASH_INTERN));
ixdp2x01_flash_data.nr_banks =
((*IXDP2X01_CPLD_FLASH_REG & IXDP2X01_CPLD_FLASH_BANK_MASK) + 1);
platform_add_devices(ixdp2x01_devices, ARRAY_SIZE(ixdp2x01_devices));
ixp2000_uart_init();
}
#ifdef CONFIG_ARCH_IXDP2401
MACHINE_START(IXDP2401, "Intel IXDP2401 Development Platform")
/* Maintainer: MontaVista Software, Inc. */
.phys_io = IXP2000_UART_PHYS_BASE,
.io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.map_io = ixdp2x01_map_io,
.init_irq = ixdp2x01_init_irq,
.timer = &ixdp2x01_timer,
.init_machine = ixdp2x01_init_machine,
MACHINE_END
#endif
#ifdef CONFIG_ARCH_IXDP2801
MACHINE_START(IXDP2801, "Intel IXDP2801 Development Platform")
/* Maintainer: MontaVista Software, Inc. */
.phys_io = IXP2000_UART_PHYS_BASE,
.io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.map_io = ixdp2x01_map_io,
.init_irq = ixdp2x01_init_irq,
.timer = &ixdp2x01_timer,
.init_machine = ixdp2x01_init_machine,
MACHINE_END
/*
* IXDP28x5 is basically an IXDP2801 with a different CPU but Intel
* changed the machine ID in the bootloader
*/
MACHINE_START(IXDP28X5, "Intel IXDP2805/2855 Development Platform")
/* Maintainer: MontaVista Software, Inc. */
.phys_io = IXP2000_UART_PHYS_BASE,
.io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.map_io = ixdp2x01_map_io,
.init_irq = ixdp2x01_init_irq,
.timer = &ixdp2x01_timer,
.init_machine = ixdp2x01_init_machine,
MACHINE_END
#endif