linux/fs/ocfs2/super.c

2643 lines
69 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/* -*- mode: c; c-basic-offset: 8; -*-
* vim: noexpandtab sw=8 ts=8 sts=0:
*
* super.c
*
* load/unload driver, mount/dismount volumes
*
* Copyright (C) 2002, 2004 Oracle. All rights reserved.
*/
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/highmem.h>
#include <linux/init.h>
#include <linux/random.h>
#include <linux/statfs.h>
#include <linux/moduleparam.h>
#include <linux/blkdev.h>
#include <linux/socket.h>
#include <linux/inet.h>
#include <linux/parser.h>
#include <linux/crc32.h>
#include <linux/debugfs.h>
#include <linux/mount.h>
#include <linux/seq_file.h>
#include <linux/quotaops.h>
#include <linux/cleancache.h>
#include <linux/signal.h>
#define CREATE_TRACE_POINTS
#include "ocfs2_trace.h"
#include <cluster/masklog.h>
#include "ocfs2.h"
/* this should be the only file to include a version 1 header */
#include "ocfs1_fs_compat.h"
#include "alloc.h"
#include "aops.h"
#include "blockcheck.h"
#include "dlmglue.h"
#include "export.h"
#include "extent_map.h"
#include "heartbeat.h"
#include "inode.h"
#include "journal.h"
#include "localalloc.h"
#include "namei.h"
#include "slot_map.h"
#include "super.h"
#include "sysfile.h"
#include "uptodate.h"
#include "xattr.h"
#include "quota.h"
#include "refcounttree.h"
#include "suballoc.h"
#include "buffer_head_io.h"
#include "filecheck.h"
static struct kmem_cache *ocfs2_inode_cachep;
struct kmem_cache *ocfs2_dquot_cachep;
struct kmem_cache *ocfs2_qf_chunk_cachep;
static struct dentry *ocfs2_debugfs_root;
MODULE_AUTHOR("Oracle");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("OCFS2 cluster file system");
struct mount_options
{
unsigned long commit_interval;
unsigned long mount_opt;
unsigned int atime_quantum;
signed short slot;
int localalloc_opt;
unsigned int resv_level;
int dir_resv_level;
char cluster_stack[OCFS2_STACK_LABEL_LEN + 1];
};
static int ocfs2_parse_options(struct super_block *sb, char *options,
struct mount_options *mopt,
int is_remount);
static int ocfs2_check_set_options(struct super_block *sb,
struct mount_options *options);
static int ocfs2_show_options(struct seq_file *s, struct dentry *root);
static void ocfs2_put_super(struct super_block *sb);
static int ocfs2_mount_volume(struct super_block *sb);
static int ocfs2_remount(struct super_block *sb, int *flags, char *data);
static void ocfs2_dismount_volume(struct super_block *sb, int mnt_err);
static int ocfs2_initialize_mem_caches(void);
static void ocfs2_free_mem_caches(void);
static void ocfs2_delete_osb(struct ocfs2_super *osb);
static int ocfs2_statfs(struct dentry *dentry, struct kstatfs *buf);
static int ocfs2_sync_fs(struct super_block *sb, int wait);
static int ocfs2_init_global_system_inodes(struct ocfs2_super *osb);
static int ocfs2_init_local_system_inodes(struct ocfs2_super *osb);
static void ocfs2_release_system_inodes(struct ocfs2_super *osb);
static int ocfs2_check_volume(struct ocfs2_super *osb);
static int ocfs2_verify_volume(struct ocfs2_dinode *di,
struct buffer_head *bh,
u32 sectsize,
struct ocfs2_blockcheck_stats *stats);
static int ocfs2_initialize_super(struct super_block *sb,
struct buffer_head *bh,
int sector_size,
struct ocfs2_blockcheck_stats *stats);
static int ocfs2_get_sector(struct super_block *sb,
struct buffer_head **bh,
int block,
int sect_size);
static struct inode *ocfs2_alloc_inode(struct super_block *sb);
static void ocfs2_free_inode(struct inode *inode);
static int ocfs2_susp_quotas(struct ocfs2_super *osb, int unsuspend);
static int ocfs2_enable_quotas(struct ocfs2_super *osb);
static void ocfs2_disable_quotas(struct ocfs2_super *osb);
static struct dquot **ocfs2_get_dquots(struct inode *inode)
{
return OCFS2_I(inode)->i_dquot;
}
static const struct super_operations ocfs2_sops = {
.statfs = ocfs2_statfs,
.alloc_inode = ocfs2_alloc_inode,
.free_inode = ocfs2_free_inode,
.drop_inode = ocfs2_drop_inode,
.evict_inode = ocfs2_evict_inode,
.sync_fs = ocfs2_sync_fs,
.put_super = ocfs2_put_super,
.remount_fs = ocfs2_remount,
.show_options = ocfs2_show_options,
.quota_read = ocfs2_quota_read,
.quota_write = ocfs2_quota_write,
.get_dquots = ocfs2_get_dquots,
};
enum {
Opt_barrier,
Opt_err_panic,
Opt_err_ro,
Opt_intr,
Opt_nointr,
Opt_hb_none,
Opt_hb_local,
Opt_hb_global,
Opt_data_ordered,
Opt_data_writeback,
Opt_atime_quantum,
Opt_slot,
Opt_commit,
Opt_localalloc,
Opt_localflocks,
Opt_stack,
Opt_user_xattr,
Opt_nouser_xattr,
Opt_inode64,
Opt_acl,
Opt_noacl,
Opt_usrquota,
Opt_grpquota,
Opt_coherency_buffered,
Opt_coherency_full,
Opt_resv_level,
Opt_dir_resv_level,
Opt_journal_async_commit,
ocfs2: add errors=continue OCFS2 is often used in high-availaibility systems. However, ocfs2 converts the filesystem to read-only at the drop of the hat. This may not be necessary, since turning the filesystem read-only would affect other running processes as well, decreasing availability. This attempt is to add errors=continue, which would return the EIO to the calling process and terminate furhter processing so that the filesystem is not corrupted further. However, the filesystem is not converted to read-only. As a future plan, I intend to create a small utility or extend fsck.ocfs2 to fix small errors such as in the inode. The input to the utility such as the inode can come from the kernel logs so we don't have to schedule a downtime for fixing small-enough errors. The patch changes the ocfs2_error to return an error. The error returned depends on the mount option set. If none is set, the default is to turn the filesystem read-only. Perhaps errors=continue is not the best option name. Historically it is used for making an attempt to progress in the current process itself. Should we call it errors=eio? or errors=killproc? Suggestions/Comments welcome. Sources are available at: https://github.com/goldwynr/linux/tree/error-cont Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 00:44:11 +02:00
Opt_err_cont,
Opt_err,
};
static const match_table_t tokens = {
{Opt_barrier, "barrier=%u"},
{Opt_err_panic, "errors=panic"},
{Opt_err_ro, "errors=remount-ro"},
{Opt_intr, "intr"},
{Opt_nointr, "nointr"},
{Opt_hb_none, OCFS2_HB_NONE},
{Opt_hb_local, OCFS2_HB_LOCAL},
{Opt_hb_global, OCFS2_HB_GLOBAL},
{Opt_data_ordered, "data=ordered"},
{Opt_data_writeback, "data=writeback"},
{Opt_atime_quantum, "atime_quantum=%u"},
{Opt_slot, "preferred_slot=%u"},
{Opt_commit, "commit=%u"},
{Opt_localalloc, "localalloc=%d"},
{Opt_localflocks, "localflocks"},
{Opt_stack, "cluster_stack=%s"},
{Opt_user_xattr, "user_xattr"},
{Opt_nouser_xattr, "nouser_xattr"},
{Opt_inode64, "inode64"},
{Opt_acl, "acl"},
{Opt_noacl, "noacl"},
{Opt_usrquota, "usrquota"},
{Opt_grpquota, "grpquota"},
{Opt_coherency_buffered, "coherency=buffered"},
{Opt_coherency_full, "coherency=full"},
{Opt_resv_level, "resv_level=%u"},
{Opt_dir_resv_level, "dir_resv_level=%u"},
{Opt_journal_async_commit, "journal_async_commit"},
ocfs2: add errors=continue OCFS2 is often used in high-availaibility systems. However, ocfs2 converts the filesystem to read-only at the drop of the hat. This may not be necessary, since turning the filesystem read-only would affect other running processes as well, decreasing availability. This attempt is to add errors=continue, which would return the EIO to the calling process and terminate furhter processing so that the filesystem is not corrupted further. However, the filesystem is not converted to read-only. As a future plan, I intend to create a small utility or extend fsck.ocfs2 to fix small errors such as in the inode. The input to the utility such as the inode can come from the kernel logs so we don't have to schedule a downtime for fixing small-enough errors. The patch changes the ocfs2_error to return an error. The error returned depends on the mount option set. If none is set, the default is to turn the filesystem read-only. Perhaps errors=continue is not the best option name. Historically it is used for making an attempt to progress in the current process itself. Should we call it errors=eio? or errors=killproc? Suggestions/Comments welcome. Sources are available at: https://github.com/goldwynr/linux/tree/error-cont Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 00:44:11 +02:00
{Opt_err_cont, "errors=continue"},
{Opt_err, NULL}
};
#ifdef CONFIG_DEBUG_FS
static int ocfs2_osb_dump(struct ocfs2_super *osb, char *buf, int len)
{
struct ocfs2_cluster_connection *cconn = osb->cconn;
struct ocfs2_recovery_map *rm = osb->recovery_map;
struct ocfs2_orphan_scan *os = &osb->osb_orphan_scan;
int i, out = 0;
unsigned long flags;
out += snprintf(buf + out, len - out,
"%10s => Id: %-s Uuid: %-s Gen: 0x%X Label: %-s\n",
"Device", osb->dev_str, osb->uuid_str,
osb->fs_generation, osb->vol_label);
out += snprintf(buf + out, len - out,
"%10s => State: %d Flags: 0x%lX\n", "Volume",
atomic_read(&osb->vol_state), osb->osb_flags);
out += snprintf(buf + out, len - out,
"%10s => Block: %lu Cluster: %d\n", "Sizes",
osb->sb->s_blocksize, osb->s_clustersize);
out += snprintf(buf + out, len - out,
"%10s => Compat: 0x%X Incompat: 0x%X "
"ROcompat: 0x%X\n",
"Features", osb->s_feature_compat,
osb->s_feature_incompat, osb->s_feature_ro_compat);
out += snprintf(buf + out, len - out,
"%10s => Opts: 0x%lX AtimeQuanta: %u\n", "Mount",
osb->s_mount_opt, osb->s_atime_quantum);
if (cconn) {
out += snprintf(buf + out, len - out,
"%10s => Stack: %s Name: %*s "
"Version: %d.%d\n", "Cluster",
(*osb->osb_cluster_stack == '\0' ?
"o2cb" : osb->osb_cluster_stack),
cconn->cc_namelen, cconn->cc_name,
cconn->cc_version.pv_major,
cconn->cc_version.pv_minor);
}
spin_lock_irqsave(&osb->dc_task_lock, flags);
out += snprintf(buf + out, len - out,
"%10s => Pid: %d Count: %lu WakeSeq: %lu "
"WorkSeq: %lu\n", "DownCnvt",
(osb->dc_task ? task_pid_nr(osb->dc_task) : -1),
osb->blocked_lock_count, osb->dc_wake_sequence,
osb->dc_work_sequence);
spin_unlock_irqrestore(&osb->dc_task_lock, flags);
spin_lock(&osb->osb_lock);
out += snprintf(buf + out, len - out, "%10s => Pid: %d Nodes:",
"Recovery",
(osb->recovery_thread_task ?
task_pid_nr(osb->recovery_thread_task) : -1));
if (rm->rm_used == 0)
out += snprintf(buf + out, len - out, " None\n");
else {
for (i = 0; i < rm->rm_used; i++)
out += snprintf(buf + out, len - out, " %d",
rm->rm_entries[i]);
out += snprintf(buf + out, len - out, "\n");
}
spin_unlock(&osb->osb_lock);
out += snprintf(buf + out, len - out,
"%10s => Pid: %d Interval: %lu\n", "Commit",
(osb->commit_task ? task_pid_nr(osb->commit_task) : -1),
osb->osb_commit_interval);
out += snprintf(buf + out, len - out,
"%10s => State: %d TxnId: %lu NumTxns: %d\n",
"Journal", osb->journal->j_state,
osb->journal->j_trans_id,
atomic_read(&osb->journal->j_num_trans));
out += snprintf(buf + out, len - out,
"%10s => GlobalAllocs: %d LocalAllocs: %d "
"SubAllocs: %d LAWinMoves: %d SAExtends: %d\n",
"Stats",
atomic_read(&osb->alloc_stats.bitmap_data),
atomic_read(&osb->alloc_stats.local_data),
atomic_read(&osb->alloc_stats.bg_allocs),
atomic_read(&osb->alloc_stats.moves),
atomic_read(&osb->alloc_stats.bg_extends));
out += snprintf(buf + out, len - out,
"%10s => State: %u Descriptor: %llu Size: %u bits "
"Default: %u bits\n",
"LocalAlloc", osb->local_alloc_state,
(unsigned long long)osb->la_last_gd,
osb->local_alloc_bits, osb->local_alloc_default_bits);
spin_lock(&osb->osb_lock);
out += snprintf(buf + out, len - out,
"%10s => InodeSlot: %d StolenInodes: %d, "
"MetaSlot: %d StolenMeta: %d\n", "Steal",
osb->s_inode_steal_slot,
atomic_read(&osb->s_num_inodes_stolen),
osb->s_meta_steal_slot,
atomic_read(&osb->s_num_meta_stolen));
spin_unlock(&osb->osb_lock);
out += snprintf(buf + out, len - out, "OrphanScan => ");
out += snprintf(buf + out, len - out, "Local: %u Global: %u ",
os->os_count, os->os_seqno);
out += snprintf(buf + out, len - out, " Last Scan: ");
if (atomic_read(&os->os_state) == ORPHAN_SCAN_INACTIVE)
out += snprintf(buf + out, len - out, "Disabled\n");
else
out += snprintf(buf + out, len - out, "%lu seconds ago\n",
(unsigned long)(ktime_get_seconds() - os->os_scantime));
out += snprintf(buf + out, len - out, "%10s => %3s %10s\n",
"Slots", "Num", "RecoGen");
for (i = 0; i < osb->max_slots; ++i) {
out += snprintf(buf + out, len - out,
"%10s %c %3d %10d\n",
" ",
(i == osb->slot_num ? '*' : ' '),
i, osb->slot_recovery_generations[i]);
}
return out;
}
static int ocfs2_osb_debug_open(struct inode *inode, struct file *file)
{
struct ocfs2_super *osb = inode->i_private;
char *buf = NULL;
buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
if (!buf)
goto bail;
i_size_write(inode, ocfs2_osb_dump(osb, buf, PAGE_SIZE));
file->private_data = buf;
return 0;
bail:
return -ENOMEM;
}
static int ocfs2_debug_release(struct inode *inode, struct file *file)
{
kfree(file->private_data);
return 0;
}
static ssize_t ocfs2_debug_read(struct file *file, char __user *buf,
size_t nbytes, loff_t *ppos)
{
return simple_read_from_buffer(buf, nbytes, ppos, file->private_data,
i_size_read(file->f_mapping->host));
}
#else
static int ocfs2_osb_debug_open(struct inode *inode, struct file *file)
{
return 0;
}
static int ocfs2_debug_release(struct inode *inode, struct file *file)
{
return 0;
}
static ssize_t ocfs2_debug_read(struct file *file, char __user *buf,
size_t nbytes, loff_t *ppos)
{
return 0;
}
#endif /* CONFIG_DEBUG_FS */
static const struct file_operations ocfs2_osb_debug_fops = {
.open = ocfs2_osb_debug_open,
.release = ocfs2_debug_release,
.read = ocfs2_debug_read,
.llseek = generic_file_llseek,
};
static int ocfs2_sync_fs(struct super_block *sb, int wait)
{
int status;
tid_t target;
struct ocfs2_super *osb = OCFS2_SB(sb);
if (ocfs2_is_hard_readonly(osb))
return -EROFS;
if (wait) {
status = ocfs2_flush_truncate_log(osb);
if (status < 0)
mlog_errno(status);
} else {
ocfs2_schedule_truncate_log_flush(osb, 0);
}
if (jbd2_journal_start_commit(osb->journal->j_journal,
&target)) {
if (wait)
jbd2_log_wait_commit(osb->journal->j_journal,
target);
}
return 0;
}
static int ocfs2_need_system_inode(struct ocfs2_super *osb, int ino)
{
if (!OCFS2_HAS_RO_COMPAT_FEATURE(osb->sb, OCFS2_FEATURE_RO_COMPAT_USRQUOTA)
&& (ino == USER_QUOTA_SYSTEM_INODE
|| ino == LOCAL_USER_QUOTA_SYSTEM_INODE))
return 0;
if (!OCFS2_HAS_RO_COMPAT_FEATURE(osb->sb, OCFS2_FEATURE_RO_COMPAT_GRPQUOTA)
&& (ino == GROUP_QUOTA_SYSTEM_INODE
|| ino == LOCAL_GROUP_QUOTA_SYSTEM_INODE))
return 0;
return 1;
}
static int ocfs2_init_global_system_inodes(struct ocfs2_super *osb)
{
struct inode *new = NULL;
int status = 0;
int i;
new = ocfs2_iget(osb, osb->root_blkno, OCFS2_FI_FLAG_SYSFILE, 0);
if (IS_ERR(new)) {
status = PTR_ERR(new);
mlog_errno(status);
goto bail;
}
osb->root_inode = new;
new = ocfs2_iget(osb, osb->system_dir_blkno, OCFS2_FI_FLAG_SYSFILE, 0);
if (IS_ERR(new)) {
status = PTR_ERR(new);
mlog_errno(status);
goto bail;
}
osb->sys_root_inode = new;
for (i = OCFS2_FIRST_ONLINE_SYSTEM_INODE;
i <= OCFS2_LAST_GLOBAL_SYSTEM_INODE; i++) {
if (!ocfs2_need_system_inode(osb, i))
continue;
new = ocfs2_get_system_file_inode(osb, i, osb->slot_num);
if (!new) {
ocfs2_release_system_inodes(osb);
status = ocfs2_is_soft_readonly(osb) ? -EROFS : -EINVAL;
mlog_errno(status);
mlog(ML_ERROR, "Unable to load system inode %d, "
"possibly corrupt fs?", i);
goto bail;
}
// the array now has one ref, so drop this one
iput(new);
}
bail:
if (status)
mlog_errno(status);
return status;
}
static int ocfs2_init_local_system_inodes(struct ocfs2_super *osb)
{
struct inode *new = NULL;
int status = 0;
int i;
for (i = OCFS2_LAST_GLOBAL_SYSTEM_INODE + 1;
i < NUM_SYSTEM_INODES;
i++) {
if (!ocfs2_need_system_inode(osb, i))
continue;
new = ocfs2_get_system_file_inode(osb, i, osb->slot_num);
if (!new) {
ocfs2_release_system_inodes(osb);
status = ocfs2_is_soft_readonly(osb) ? -EROFS : -EINVAL;
mlog(ML_ERROR, "status=%d, sysfile=%d, slot=%d\n",
status, i, osb->slot_num);
goto bail;
}
/* the array now has one ref, so drop this one */
iput(new);
}
bail:
if (status)
mlog_errno(status);
return status;
}
static void ocfs2_release_system_inodes(struct ocfs2_super *osb)
{
int i;
struct inode *inode;
for (i = 0; i < NUM_GLOBAL_SYSTEM_INODES; i++) {
inode = osb->global_system_inodes[i];
if (inode) {
iput(inode);
osb->global_system_inodes[i] = NULL;
}
}
inode = osb->sys_root_inode;
if (inode) {
iput(inode);
osb->sys_root_inode = NULL;
}
inode = osb->root_inode;
if (inode) {
iput(inode);
osb->root_inode = NULL;
}
if (!osb->local_system_inodes)
return;
for (i = 0; i < NUM_LOCAL_SYSTEM_INODES * osb->max_slots; i++) {
if (osb->local_system_inodes[i]) {
iput(osb->local_system_inodes[i]);
osb->local_system_inodes[i] = NULL;
}
}
kfree(osb->local_system_inodes);
osb->local_system_inodes = NULL;
}
/* We're allocating fs objects, use GFP_NOFS */
static struct inode *ocfs2_alloc_inode(struct super_block *sb)
{
struct ocfs2_inode_info *oi;
oi = kmem_cache_alloc(ocfs2_inode_cachep, GFP_NOFS);
if (!oi)
return NULL;
oi->i_sync_tid = 0;
oi->i_datasync_tid = 0;
memset(&oi->i_dquot, 0, sizeof(oi->i_dquot));
jbd2_journal_init_jbd_inode(&oi->ip_jinode, &oi->vfs_inode);
return &oi->vfs_inode;
}
static void ocfs2_free_inode(struct inode *inode)
{
kmem_cache_free(ocfs2_inode_cachep, OCFS2_I(inode));
}
static unsigned long long ocfs2_max_file_offset(unsigned int bbits,
unsigned int cbits)
{
unsigned int bytes = 1 << cbits;
unsigned int trim = bytes;
unsigned int bitshift = 32;
/*
* i_size and all block offsets in ocfs2 are always 64 bits
* wide. i_clusters is 32 bits, in cluster-sized units. So on
* 64 bit platforms, cluster size will be the limiting factor.
*/
#if BITS_PER_LONG == 32
BUILD_BUG_ON(sizeof(sector_t) != 8);
/*
* We might be limited by page cache size.
*/
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 14:29:47 +02:00
if (bytes > PAGE_SIZE) {
bytes = PAGE_SIZE;
trim = 1;
/*
* Shift by 31 here so that we don't get larger than
* MAX_LFS_FILESIZE
*/
bitshift = 31;
}
#endif
/*
* Trim by a whole cluster when we can actually approach the
* on-disk limits. Otherwise we can overflow i_clusters when
* an extent start is at the max offset.
*/
return (((unsigned long long)bytes) << bitshift) - trim;
}
static int ocfs2_remount(struct super_block *sb, int *flags, char *data)
{
int incompat_features;
int ret = 0;
struct mount_options parsed_options;
struct ocfs2_super *osb = OCFS2_SB(sb);
u32 tmp;
fs: push sync_filesystem() down to the file system's remount_fs() Previously, the no-op "mount -o mount /dev/xxx" operation when the file system is already mounted read-write causes an implied, unconditional syncfs(). This seems pretty stupid, and it's certainly documented or guaraunteed to do this, nor is it particularly useful, except in the case where the file system was mounted rw and is getting remounted read-only. However, it's possible that there might be some file systems that are actually depending on this behavior. In most file systems, it's probably fine to only call sync_filesystem() when transitioning from read-write to read-only, and there are some file systems where this is not needed at all (for example, for a pseudo-filesystem or something like romfs). Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: linux-fsdevel@vger.kernel.org Cc: Christoph Hellwig <hch@infradead.org> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Evgeniy Dushistov <dushistov@mail.ru> Cc: Jan Kara <jack@suse.cz> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Anders Larsen <al@alarsen.net> Cc: Phillip Lougher <phillip@squashfs.org.uk> Cc: Kees Cook <keescook@chromium.org> Cc: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Cc: Petr Vandrovec <petr@vandrovec.name> Cc: xfs@oss.sgi.com Cc: linux-btrfs@vger.kernel.org Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Cc: codalist@coda.cs.cmu.edu Cc: linux-ext4@vger.kernel.org Cc: linux-f2fs-devel@lists.sourceforge.net Cc: fuse-devel@lists.sourceforge.net Cc: cluster-devel@redhat.com Cc: linux-mtd@lists.infradead.org Cc: jfs-discussion@lists.sourceforge.net Cc: linux-nfs@vger.kernel.org Cc: linux-nilfs@vger.kernel.org Cc: linux-ntfs-dev@lists.sourceforge.net Cc: ocfs2-devel@oss.oracle.com Cc: reiserfs-devel@vger.kernel.org
2014-03-13 15:14:33 +01:00
sync_filesystem(sb);
if (!ocfs2_parse_options(sb, data, &parsed_options, 1) ||
!ocfs2_check_set_options(sb, &parsed_options)) {
ret = -EINVAL;
goto out;
}
tmp = OCFS2_MOUNT_HB_LOCAL | OCFS2_MOUNT_HB_GLOBAL |
OCFS2_MOUNT_HB_NONE;
if ((osb->s_mount_opt & tmp) != (parsed_options.mount_opt & tmp)) {
ret = -EINVAL;
mlog(ML_ERROR, "Cannot change heartbeat mode on remount\n");
goto out;
}
if ((osb->s_mount_opt & OCFS2_MOUNT_DATA_WRITEBACK) !=
(parsed_options.mount_opt & OCFS2_MOUNT_DATA_WRITEBACK)) {
ret = -EINVAL;
mlog(ML_ERROR, "Cannot change data mode on remount\n");
goto out;
}
/* Probably don't want this on remount; it might
* mess with other nodes */
if (!(osb->s_mount_opt & OCFS2_MOUNT_INODE64) &&
(parsed_options.mount_opt & OCFS2_MOUNT_INODE64)) {
ret = -EINVAL;
mlog(ML_ERROR, "Cannot enable inode64 on remount\n");
goto out;
}
/* We're going to/from readonly mode. */
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27 22:05:09 +01:00
if ((bool)(*flags & SB_RDONLY) != sb_rdonly(sb)) {
/* Disable quota accounting before remounting RO */
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27 22:05:09 +01:00
if (*flags & SB_RDONLY) {
ret = ocfs2_susp_quotas(osb, 0);
if (ret < 0)
goto out;
}
/* Lock here so the check of HARD_RO and the potential
* setting of SOFT_RO is atomic. */
spin_lock(&osb->osb_lock);
if (osb->osb_flags & OCFS2_OSB_HARD_RO) {
mlog(ML_ERROR, "Remount on readonly device is forbidden.\n");
ret = -EROFS;
goto unlock_osb;
}
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27 22:05:09 +01:00
if (*flags & SB_RDONLY) {
sb->s_flags |= SB_RDONLY;
osb->osb_flags |= OCFS2_OSB_SOFT_RO;
} else {
if (osb->osb_flags & OCFS2_OSB_ERROR_FS) {
mlog(ML_ERROR, "Cannot remount RDWR "
"filesystem due to previous errors.\n");
ret = -EROFS;
goto unlock_osb;
}
incompat_features = OCFS2_HAS_RO_COMPAT_FEATURE(sb, ~OCFS2_FEATURE_RO_COMPAT_SUPP);
if (incompat_features) {
mlog(ML_ERROR, "Cannot remount RDWR because "
"of unsupported optional features "
"(%x).\n", incompat_features);
ret = -EINVAL;
goto unlock_osb;
}
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27 22:05:09 +01:00
sb->s_flags &= ~SB_RDONLY;
osb->osb_flags &= ~OCFS2_OSB_SOFT_RO;
}
trace_ocfs2_remount(sb->s_flags, osb->osb_flags, *flags);
unlock_osb:
spin_unlock(&osb->osb_lock);
/* Enable quota accounting after remounting RW */
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27 22:05:09 +01:00
if (!ret && !(*flags & SB_RDONLY)) {
if (sb_any_quota_suspended(sb))
ret = ocfs2_susp_quotas(osb, 1);
else
ret = ocfs2_enable_quotas(osb);
if (ret < 0) {
/* Return back changes... */
spin_lock(&osb->osb_lock);
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27 22:05:09 +01:00
sb->s_flags |= SB_RDONLY;
osb->osb_flags |= OCFS2_OSB_SOFT_RO;
spin_unlock(&osb->osb_lock);
goto out;
}
}
}
if (!ret) {
/* Only save off the new mount options in case of a successful
* remount. */
osb->s_mount_opt = parsed_options.mount_opt;
osb->s_atime_quantum = parsed_options.atime_quantum;
osb->preferred_slot = parsed_options.slot;
if (parsed_options.commit_interval)
osb->osb_commit_interval = parsed_options.commit_interval;
if (!ocfs2_is_hard_readonly(osb))
ocfs2_set_journal_params(osb);
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27 22:05:09 +01:00
sb->s_flags = (sb->s_flags & ~SB_POSIXACL) |
((osb->s_mount_opt & OCFS2_MOUNT_POSIX_ACL) ?
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27 22:05:09 +01:00
SB_POSIXACL : 0);
}
out:
return ret;
}
static int ocfs2_sb_probe(struct super_block *sb,
struct buffer_head **bh,
int *sector_size,
struct ocfs2_blockcheck_stats *stats)
{
int status, tmpstat;
struct ocfs1_vol_disk_hdr *hdr;
struct ocfs2_dinode *di;
int blksize;
*bh = NULL;
/* may be > 512 */
*sector_size = bdev_logical_block_size(sb->s_bdev);
if (*sector_size > OCFS2_MAX_BLOCKSIZE) {
mlog(ML_ERROR, "Hardware sector size too large: %d (max=%d)\n",
*sector_size, OCFS2_MAX_BLOCKSIZE);
status = -EINVAL;
goto bail;
}
/* Can this really happen? */
if (*sector_size < OCFS2_MIN_BLOCKSIZE)
*sector_size = OCFS2_MIN_BLOCKSIZE;
/* check block zero for old format */
status = ocfs2_get_sector(sb, bh, 0, *sector_size);
if (status < 0) {
mlog_errno(status);
goto bail;
}
hdr = (struct ocfs1_vol_disk_hdr *) (*bh)->b_data;
if (hdr->major_version == OCFS1_MAJOR_VERSION) {
mlog(ML_ERROR, "incompatible version: %u.%u\n",
hdr->major_version, hdr->minor_version);
status = -EINVAL;
}
if (memcmp(hdr->signature, OCFS1_VOLUME_SIGNATURE,
strlen(OCFS1_VOLUME_SIGNATURE)) == 0) {
mlog(ML_ERROR, "incompatible volume signature: %8s\n",
hdr->signature);
status = -EINVAL;
}
brelse(*bh);
*bh = NULL;
if (status < 0) {
mlog(ML_ERROR, "This is an ocfs v1 filesystem which must be "
"upgraded before mounting with ocfs v2\n");
goto bail;
}
/*
* Now check at magic offset for 512, 1024, 2048, 4096
* blocksizes. 4096 is the maximum blocksize because it is
* the minimum clustersize.
*/
status = -EINVAL;
for (blksize = *sector_size;
blksize <= OCFS2_MAX_BLOCKSIZE;
blksize <<= 1) {
tmpstat = ocfs2_get_sector(sb, bh,
OCFS2_SUPER_BLOCK_BLKNO,
blksize);
if (tmpstat < 0) {
status = tmpstat;
mlog_errno(status);
break;
}
di = (struct ocfs2_dinode *) (*bh)->b_data;
memset(stats, 0, sizeof(struct ocfs2_blockcheck_stats));
spin_lock_init(&stats->b_lock);
tmpstat = ocfs2_verify_volume(di, *bh, blksize, stats);
if (tmpstat < 0) {
brelse(*bh);
*bh = NULL;
}
if (tmpstat != -EAGAIN) {
status = tmpstat;
break;
}
}
bail:
return status;
}
static int ocfs2_verify_heartbeat(struct ocfs2_super *osb)
{
u32 hb_enabled = OCFS2_MOUNT_HB_LOCAL | OCFS2_MOUNT_HB_GLOBAL;
if (osb->s_mount_opt & hb_enabled) {
if (ocfs2_mount_local(osb)) {
mlog(ML_ERROR, "Cannot heartbeat on a locally "
"mounted device.\n");
return -EINVAL;
}
if (ocfs2_userspace_stack(osb)) {
mlog(ML_ERROR, "Userspace stack expected, but "
"o2cb heartbeat arguments passed to mount\n");
return -EINVAL;
}
if (((osb->s_mount_opt & OCFS2_MOUNT_HB_GLOBAL) &&
!ocfs2_cluster_o2cb_global_heartbeat(osb)) ||
((osb->s_mount_opt & OCFS2_MOUNT_HB_LOCAL) &&
ocfs2_cluster_o2cb_global_heartbeat(osb))) {
mlog(ML_ERROR, "Mismatching o2cb heartbeat modes\n");
return -EINVAL;
}
}
if (!(osb->s_mount_opt & hb_enabled)) {
if (!ocfs2_mount_local(osb) && !ocfs2_is_hard_readonly(osb) &&
!ocfs2_userspace_stack(osb)) {
mlog(ML_ERROR, "Heartbeat has to be started to mount "
"a read-write clustered device.\n");
return -EINVAL;
}
}
return 0;
}
/*
* If we're using a userspace stack, mount should have passed
* a name that matches the disk. If not, mount should not
* have passed a stack.
*/
static int ocfs2_verify_userspace_stack(struct ocfs2_super *osb,
struct mount_options *mopt)
{
if (!ocfs2_userspace_stack(osb) && mopt->cluster_stack[0]) {
mlog(ML_ERROR,
"cluster stack passed to mount, but this filesystem "
"does not support it\n");
return -EINVAL;
}
if (ocfs2_userspace_stack(osb) &&
strncmp(osb->osb_cluster_stack, mopt->cluster_stack,
OCFS2_STACK_LABEL_LEN)) {
mlog(ML_ERROR,
"cluster stack passed to mount (\"%s\") does not "
"match the filesystem (\"%s\")\n",
mopt->cluster_stack,
osb->osb_cluster_stack);
return -EINVAL;
}
return 0;
}
static int ocfs2_susp_quotas(struct ocfs2_super *osb, int unsuspend)
{
int type;
struct super_block *sb = osb->sb;
unsigned int feature[OCFS2_MAXQUOTAS] = {
OCFS2_FEATURE_RO_COMPAT_USRQUOTA,
OCFS2_FEATURE_RO_COMPAT_GRPQUOTA};
int status = 0;
for (type = 0; type < OCFS2_MAXQUOTAS; type++) {
if (!OCFS2_HAS_RO_COMPAT_FEATURE(sb, feature[type]))
continue;
if (unsuspend)
status = dquot_resume(sb, type);
else {
struct ocfs2_mem_dqinfo *oinfo;
/* Cancel periodic syncing before suspending */
oinfo = sb_dqinfo(sb, type)->dqi_priv;
cancel_delayed_work_sync(&oinfo->dqi_sync_work);
status = dquot_suspend(sb, type);
}
if (status < 0)
break;
}
if (status < 0)
mlog(ML_ERROR, "Failed to suspend/unsuspend quotas on "
"remount (error = %d).\n", status);
return status;
}
static int ocfs2_enable_quotas(struct ocfs2_super *osb)
{
struct inode *inode[OCFS2_MAXQUOTAS] = { NULL, NULL };
struct super_block *sb = osb->sb;
unsigned int feature[OCFS2_MAXQUOTAS] = {
OCFS2_FEATURE_RO_COMPAT_USRQUOTA,
OCFS2_FEATURE_RO_COMPAT_GRPQUOTA};
unsigned int ino[OCFS2_MAXQUOTAS] = {
LOCAL_USER_QUOTA_SYSTEM_INODE,
LOCAL_GROUP_QUOTA_SYSTEM_INODE };
int status;
int type;
sb_dqopt(sb)->flags |= DQUOT_QUOTA_SYS_FILE | DQUOT_NEGATIVE_USAGE;
for (type = 0; type < OCFS2_MAXQUOTAS; type++) {
if (!OCFS2_HAS_RO_COMPAT_FEATURE(sb, feature[type]))
continue;
inode[type] = ocfs2_get_system_file_inode(osb, ino[type],
osb->slot_num);
if (!inode[type]) {
status = -ENOENT;
goto out_quota_off;
}
status = dquot_enable(inode[type], type, QFMT_OCFS2,
DQUOT_USAGE_ENABLED);
if (status < 0)
goto out_quota_off;
}
for (type = 0; type < OCFS2_MAXQUOTAS; type++)
iput(inode[type]);
return 0;
out_quota_off:
ocfs2_disable_quotas(osb);
for (type = 0; type < OCFS2_MAXQUOTAS; type++)
iput(inode[type]);
mlog_errno(status);
return status;
}
static void ocfs2_disable_quotas(struct ocfs2_super *osb)
{
int type;
struct inode *inode;
struct super_block *sb = osb->sb;
struct ocfs2_mem_dqinfo *oinfo;
/* We mostly ignore errors in this function because there's not much
* we can do when we see them */
for (type = 0; type < OCFS2_MAXQUOTAS; type++) {
if (!sb_has_quota_loaded(sb, type))
continue;
oinfo = sb_dqinfo(sb, type)->dqi_priv;
cancel_delayed_work_sync(&oinfo->dqi_sync_work);
inode = igrab(sb->s_dquot.files[type]);
/* Turn off quotas. This will remove all dquot structures from
* memory and so they will be automatically synced to global
* quota files */
dquot_disable(sb, type, DQUOT_USAGE_ENABLED |
DQUOT_LIMITS_ENABLED);
if (!inode)
continue;
iput(inode);
}
}
static int ocfs2_fill_super(struct super_block *sb, void *data, int silent)
{
struct dentry *root;
int status, sector_size;
struct mount_options parsed_options;
struct inode *inode = NULL;
struct ocfs2_super *osb = NULL;
struct buffer_head *bh = NULL;
char nodestr[12];
struct ocfs2_blockcheck_stats stats;
trace_ocfs2_fill_super(sb, data, silent);
if (!ocfs2_parse_options(sb, data, &parsed_options, 0)) {
status = -EINVAL;
goto read_super_error;
}
/* probe for superblock */
status = ocfs2_sb_probe(sb, &bh, &sector_size, &stats);
if (status < 0) {
mlog(ML_ERROR, "superblock probe failed!\n");
goto read_super_error;
}
status = ocfs2_initialize_super(sb, bh, sector_size, &stats);
osb = OCFS2_SB(sb);
if (status < 0) {
mlog_errno(status);
goto read_super_error;
}
brelse(bh);
bh = NULL;
if (!ocfs2_check_set_options(sb, &parsed_options)) {
status = -EINVAL;
goto read_super_error;
}
osb->s_mount_opt = parsed_options.mount_opt;
osb->s_atime_quantum = parsed_options.atime_quantum;
osb->preferred_slot = parsed_options.slot;
osb->osb_commit_interval = parsed_options.commit_interval;
ocfs2_la_set_sizes(osb, parsed_options.localalloc_opt);
osb->osb_resv_level = parsed_options.resv_level;
osb->osb_dir_resv_level = parsed_options.resv_level;
if (parsed_options.dir_resv_level == -1)
osb->osb_dir_resv_level = parsed_options.resv_level;
else
osb->osb_dir_resv_level = parsed_options.dir_resv_level;
status = ocfs2_verify_userspace_stack(osb, &parsed_options);
if (status)
goto read_super_error;
sb->s_magic = OCFS2_SUPER_MAGIC;
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27 22:05:09 +01:00
sb->s_flags = (sb->s_flags & ~(SB_POSIXACL | SB_NOSEC)) |
((osb->s_mount_opt & OCFS2_MOUNT_POSIX_ACL) ? SB_POSIXACL : 0);
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27 22:05:09 +01:00
/* Hard readonly mode only if: bdev_read_only, SB_RDONLY,
* heartbeat=none */
if (bdev_read_only(sb->s_bdev)) {
if (!sb_rdonly(sb)) {
status = -EACCES;
mlog(ML_ERROR, "Readonly device detected but readonly "
"mount was not specified.\n");
goto read_super_error;
}
/* You should not be able to start a local heartbeat
* on a readonly device. */
if (osb->s_mount_opt & OCFS2_MOUNT_HB_LOCAL) {
status = -EROFS;
mlog(ML_ERROR, "Local heartbeat specified on readonly "
"device.\n");
goto read_super_error;
}
status = ocfs2_check_journals_nolocks(osb);
if (status < 0) {
if (status == -EROFS)
mlog(ML_ERROR, "Recovery required on readonly "
"file system, but write access is "
"unavailable.\n");
else
mlog_errno(status);
goto read_super_error;
}
ocfs2_set_ro_flag(osb, 1);
printk(KERN_NOTICE "ocfs2: Readonly device (%s) detected. "
"Cluster services will not be used for this mount. "
"Recovery will be skipped.\n", osb->dev_str);
}
if (!ocfs2_is_hard_readonly(osb)) {
if (sb_rdonly(sb))
ocfs2_set_ro_flag(osb, 0);
}
status = ocfs2_verify_heartbeat(osb);
if (status < 0) {
mlog_errno(status);
goto read_super_error;
}
osb->osb_debug_root = debugfs_create_dir(osb->uuid_str,
ocfs2_debugfs_root);
if (!osb->osb_debug_root) {
status = -EINVAL;
mlog(ML_ERROR, "Unable to create per-mount debugfs root.\n");
goto read_super_error;
}
osb->osb_ctxt = debugfs_create_file("fs_state", S_IFREG|S_IRUSR,
osb->osb_debug_root,
osb,
&ocfs2_osb_debug_fops);
if (!osb->osb_ctxt) {
status = -EINVAL;
mlog_errno(status);
goto read_super_error;
}
if (ocfs2_meta_ecc(osb)) {
status = ocfs2_blockcheck_stats_debugfs_install(
&osb->osb_ecc_stats,
osb->osb_debug_root);
if (status) {
mlog(ML_ERROR,
"Unable to create blockcheck statistics "
"files\n");
goto read_super_error;
}
}
status = ocfs2_mount_volume(sb);
if (status < 0)
goto read_super_error;
if (osb->root_inode)
inode = igrab(osb->root_inode);
if (!inode) {
status = -EIO;
mlog_errno(status);
goto read_super_error;
}
root = d_make_root(inode);
if (!root) {
status = -ENOMEM;
mlog_errno(status);
goto read_super_error;
}
sb->s_root = root;
ocfs2_complete_mount_recovery(osb);
osb->osb_dev_kset = kset_create_and_add(sb->s_id, NULL,
&ocfs2_kset->kobj);
if (!osb->osb_dev_kset) {
status = -ENOMEM;
mlog(ML_ERROR, "Unable to create device kset %s.\n", sb->s_id);
goto read_super_error;
}
/* Create filecheck sysfs related directories/files at
* /sys/fs/ocfs2/<devname>/filecheck */
if (ocfs2_filecheck_create_sysfs(osb)) {
status = -ENOMEM;
mlog(ML_ERROR, "Unable to create filecheck sysfs directory at "
"/sys/fs/ocfs2/%s/filecheck.\n", sb->s_id);
goto read_super_error;
}
if (ocfs2_mount_local(osb))
snprintf(nodestr, sizeof(nodestr), "local");
else
snprintf(nodestr, sizeof(nodestr), "%u", osb->node_num);
printk(KERN_INFO "ocfs2: Mounting device (%s) on (node %s, slot %d) "
"with %s data mode.\n",
osb->dev_str, nodestr, osb->slot_num,
osb->s_mount_opt & OCFS2_MOUNT_DATA_WRITEBACK ? "writeback" :
"ordered");
atomic_set(&osb->vol_state, VOLUME_MOUNTED);
wake_up(&osb->osb_mount_event);
/* Now we can initialize quotas because we can afford to wait
* for cluster locks recovery now. That also means that truncation
* log recovery can happen but that waits for proper quota setup */
if (!sb_rdonly(sb)) {
status = ocfs2_enable_quotas(osb);
if (status < 0) {
/* We have to err-out specially here because
* s_root is already set */
mlog_errno(status);
atomic_set(&osb->vol_state, VOLUME_DISABLED);
wake_up(&osb->osb_mount_event);
return status;
}
}
ocfs2_complete_quota_recovery(osb);
/* Now we wake up again for processes waiting for quotas */
atomic_set(&osb->vol_state, VOLUME_MOUNTED_QUOTAS);
wake_up(&osb->osb_mount_event);
/* Start this when the mount is almost sure of being successful */
ocfs2_orphan_scan_start(osb);
return status;
read_super_error:
brelse(bh);
ocfs2: give an obvious tip for mismatched cluster names Add an obvious error message, due to mismatched cluster names between on-disk and in the current cluster. We can meet this case during OCFS2 cluster migration. If we can give the user an obvious tip for why they can not mount the file system after migration, they can quickly fix this mismatch problem. Second, also move printing ocfs2_fill_super() errno to the front of ocfs2_dismount_volume(), since ocfs2_dismount_volume() will also print its own message. I looked through all the code of OCFS2 (include o2cb); there is not any place which returns this error. In fact, the function calling path ocfs2_fill_super -> ocfs2_mount_volume -> ocfs2_dlm_init -> dlm_new_lockspace is a very specific one. We can use this errno to give the user a more clear tip, since this case is a little common during cluster migration, but the customer can quickly get the failure cause if there is a error printed. Also, I think it is not possible to add this errno in the o2cb path during ocfs2_dlm_init(), since the o2cb code has been stable for a long time. We only print this error tip when the user uses pcmk stack, since using the o2cb stack the user will not meet this error. [ghe@suse.com: v2] Link: http://lkml.kernel.org/r/1495419305-3780-1-git-send-email-ghe@suse.com Link: http://lkml.kernel.org/r/1495089336-19312-1-git-send-email-ghe@suse.com Signed-off-by: Gang He <ghe@suse.com> Reviewed-by: Mark Fasheh <mfasheh@versity.com> Acked-by: Joseph Qi <jiangqi903@gmail.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-01 01:14:29 +01:00
if (status)
mlog_errno(status);
if (osb) {
atomic_set(&osb->vol_state, VOLUME_DISABLED);
wake_up(&osb->osb_mount_event);
ocfs2_dismount_volume(sb, 1);
}
return status;
}
static struct dentry *ocfs2_mount(struct file_system_type *fs_type,
[PATCH] VFS: Permit filesystem to override root dentry on mount Extend the get_sb() filesystem operation to take an extra argument that permits the VFS to pass in the target vfsmount that defines the mountpoint. The filesystem is then required to manually set the superblock and root dentry pointers. For most filesystems, this should be done with simple_set_mnt() which will set the superblock pointer and then set the root dentry to the superblock's s_root (as per the old default behaviour). The get_sb() op now returns an integer as there's now no need to return the superblock pointer. This patch permits a superblock to be implicitly shared amongst several mount points, such as can be done with NFS to avoid potential inode aliasing. In such a case, simple_set_mnt() would not be called, and instead the mnt_root and mnt_sb would be set directly. The patch also makes the following changes: (*) the get_sb_*() convenience functions in the core kernel now take a vfsmount pointer argument and return an integer, so most filesystems have to change very little. (*) If one of the convenience function is not used, then get_sb() should normally call simple_set_mnt() to instantiate the vfsmount. This will always return 0, and so can be tail-called from get_sb(). (*) generic_shutdown_super() now calls shrink_dcache_sb() to clean up the dcache upon superblock destruction rather than shrink_dcache_anon(). This is required because the superblock may now have multiple trees that aren't actually bound to s_root, but that still need to be cleaned up. The currently called functions assume that the whole tree is rooted at s_root, and that anonymous dentries are not the roots of trees which results in dentries being left unculled. However, with the way NFS superblock sharing are currently set to be implemented, these assumptions are violated: the root of the filesystem is simply a dummy dentry and inode (the real inode for '/' may well be inaccessible), and all the vfsmounts are rooted on anonymous[*] dentries with child trees. [*] Anonymous until discovered from another tree. (*) The documentation has been adjusted, including the additional bit of changing ext2_* into foo_* in the documentation. [akpm@osdl.org: convert ipath_fs, do other stuff] Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Nathan Scott <nathans@sgi.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 11:02:57 +02:00
int flags,
const char *dev_name,
void *data)
{
return mount_bdev(fs_type, flags, dev_name, data, ocfs2_fill_super);
}
static struct file_system_type ocfs2_fs_type = {
.owner = THIS_MODULE,
.name = "ocfs2",
.mount = ocfs2_mount,
ocfs2: revert iput deferring code in ocfs2_drop_dentry_lock The following patches are reverted in this patch because these patches caused performance regression in the remote unlink() calls. ea455f8ab683 - ocfs2: Push out dropping of dentry lock to ocfs2_wq f7b1aa69be13 - ocfs2: Fix deadlock on umount 5fd131893793 - ocfs2: Don't oops in ocfs2_kill_sb on a failed mount Previous patches in this series removed the possible deadlocks from downconvert thread so the above patches shouldn't be needed anymore. The regression is caused because these patches delay the iput() in case of dentry unlocks. This also delays the unlocking of the open lockres. The open lockresource is required to test if the inode can be wiped from disk or not. When the deleting node does not get the open lock, it marks it as orphan (even though it is not in use by another node/process) and causes a journal checkpoint. This delays operations following the inode eviction. This also moves the inode to the orphaned inode which further causes more I/O and a lot of unneccessary orphans. The following script can be used to generate the load causing issues: declare -a create declare -a remove declare -a iterations=(1 2 4 8 16 32 64 128 256 512 1024 2048 4096 8192 16384) unique="`mktemp -u XXXXX`" script="/tmp/idontknow-${unique}.sh" cat <<EOF > "${script}" for n in {1..8}; do mkdir -p test/dir\${n} eval touch test/dir\${n}/foo{1.."\$1"} done EOF chmod 700 "${script}" function fcreate () { exec 2>&1 /usr/bin/time --format=%E "${script}" "$1" } function fremove () { exec 2>&1 /usr/bin/time --format=%E ssh node2 "cd `pwd`; rm -Rf test*" } function fcp () { exec 2>&1 /usr/bin/time --format=%E ssh node3 "cd `pwd`; cp -R test test.new" } echo ------------------------------------------------- echo "| # files | create #s | copy #s | remove #s |" echo ------------------------------------------------- for ((x=0; x < ${#iterations[*]} ; x++)) do create[$x]="`fcreate ${iterations[$x]}`" copy[$x]="`fcp ${iterations[$x]}`" remove[$x]="`fremove`" printf "| %8d | %9s | %9s | %9s |\n" ${iterations[$x]} ${create[$x]} ${copy[$x]} ${remove[$x]} done rm "${script}" echo "------------------------" Signed-off-by: Srinivas Eeda <srinivas.eeda@oracle.com> Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 23:46:59 +02:00
.kill_sb = kill_block_super,
.fs_flags = FS_REQUIRES_DEV|FS_RENAME_DOES_D_MOVE,
.next = NULL
};
MODULE_ALIAS_FS("ocfs2");
static int ocfs2_check_set_options(struct super_block *sb,
struct mount_options *options)
{
if (options->mount_opt & OCFS2_MOUNT_USRQUOTA &&
!OCFS2_HAS_RO_COMPAT_FEATURE(sb,
OCFS2_FEATURE_RO_COMPAT_USRQUOTA)) {
mlog(ML_ERROR, "User quotas were requested, but this "
"filesystem does not have the feature enabled.\n");
return 0;
}
if (options->mount_opt & OCFS2_MOUNT_GRPQUOTA &&
!OCFS2_HAS_RO_COMPAT_FEATURE(sb,
OCFS2_FEATURE_RO_COMPAT_GRPQUOTA)) {
mlog(ML_ERROR, "Group quotas were requested, but this "
"filesystem does not have the feature enabled.\n");
return 0;
}
if (options->mount_opt & OCFS2_MOUNT_POSIX_ACL &&
!OCFS2_HAS_INCOMPAT_FEATURE(sb, OCFS2_FEATURE_INCOMPAT_XATTR)) {
mlog(ML_ERROR, "ACL support requested but extended attributes "
"feature is not enabled\n");
return 0;
}
/* No ACL setting specified? Use XATTR feature... */
if (!(options->mount_opt & (OCFS2_MOUNT_POSIX_ACL |
OCFS2_MOUNT_NO_POSIX_ACL))) {
if (OCFS2_HAS_INCOMPAT_FEATURE(sb, OCFS2_FEATURE_INCOMPAT_XATTR))
options->mount_opt |= OCFS2_MOUNT_POSIX_ACL;
else
options->mount_opt |= OCFS2_MOUNT_NO_POSIX_ACL;
}
return 1;
}
static int ocfs2_parse_options(struct super_block *sb,
char *options,
struct mount_options *mopt,
int is_remount)
{
int status, user_stack = 0;
char *p;
u32 tmp;
int token, option;
substring_t args[MAX_OPT_ARGS];
trace_ocfs2_parse_options(is_remount, options ? options : "(none)");
mopt->commit_interval = 0;
mopt->mount_opt = OCFS2_MOUNT_NOINTR;
mopt->atime_quantum = OCFS2_DEFAULT_ATIME_QUANTUM;
mopt->slot = OCFS2_INVALID_SLOT;
mopt->localalloc_opt = -1;
mopt->cluster_stack[0] = '\0';
mopt->resv_level = OCFS2_DEFAULT_RESV_LEVEL;
mopt->dir_resv_level = -1;
if (!options) {
status = 1;
goto bail;
}
while ((p = strsep(&options, ",")) != NULL) {
if (!*p)
continue;
token = match_token(p, tokens, args);
switch (token) {
case Opt_hb_local:
mopt->mount_opt |= OCFS2_MOUNT_HB_LOCAL;
break;
case Opt_hb_none:
mopt->mount_opt |= OCFS2_MOUNT_HB_NONE;
break;
case Opt_hb_global:
mopt->mount_opt |= OCFS2_MOUNT_HB_GLOBAL;
break;
case Opt_barrier:
if (match_int(&args[0], &option)) {
status = 0;
goto bail;
}
if (option)
mopt->mount_opt |= OCFS2_MOUNT_BARRIER;
else
mopt->mount_opt &= ~OCFS2_MOUNT_BARRIER;
break;
case Opt_intr:
mopt->mount_opt &= ~OCFS2_MOUNT_NOINTR;
break;
case Opt_nointr:
mopt->mount_opt |= OCFS2_MOUNT_NOINTR;
break;
case Opt_err_panic:
ocfs2: add errors=continue OCFS2 is often used in high-availaibility systems. However, ocfs2 converts the filesystem to read-only at the drop of the hat. This may not be necessary, since turning the filesystem read-only would affect other running processes as well, decreasing availability. This attempt is to add errors=continue, which would return the EIO to the calling process and terminate furhter processing so that the filesystem is not corrupted further. However, the filesystem is not converted to read-only. As a future plan, I intend to create a small utility or extend fsck.ocfs2 to fix small errors such as in the inode. The input to the utility such as the inode can come from the kernel logs so we don't have to schedule a downtime for fixing small-enough errors. The patch changes the ocfs2_error to return an error. The error returned depends on the mount option set. If none is set, the default is to turn the filesystem read-only. Perhaps errors=continue is not the best option name. Historically it is used for making an attempt to progress in the current process itself. Should we call it errors=eio? or errors=killproc? Suggestions/Comments welcome. Sources are available at: https://github.com/goldwynr/linux/tree/error-cont Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 00:44:11 +02:00
mopt->mount_opt &= ~OCFS2_MOUNT_ERRORS_CONT;
mopt->mount_opt &= ~OCFS2_MOUNT_ERRORS_ROFS;
mopt->mount_opt |= OCFS2_MOUNT_ERRORS_PANIC;
break;
case Opt_err_ro:
ocfs2: add errors=continue OCFS2 is often used in high-availaibility systems. However, ocfs2 converts the filesystem to read-only at the drop of the hat. This may not be necessary, since turning the filesystem read-only would affect other running processes as well, decreasing availability. This attempt is to add errors=continue, which would return the EIO to the calling process and terminate furhter processing so that the filesystem is not corrupted further. However, the filesystem is not converted to read-only. As a future plan, I intend to create a small utility or extend fsck.ocfs2 to fix small errors such as in the inode. The input to the utility such as the inode can come from the kernel logs so we don't have to schedule a downtime for fixing small-enough errors. The patch changes the ocfs2_error to return an error. The error returned depends on the mount option set. If none is set, the default is to turn the filesystem read-only. Perhaps errors=continue is not the best option name. Historically it is used for making an attempt to progress in the current process itself. Should we call it errors=eio? or errors=killproc? Suggestions/Comments welcome. Sources are available at: https://github.com/goldwynr/linux/tree/error-cont Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 00:44:11 +02:00
mopt->mount_opt &= ~OCFS2_MOUNT_ERRORS_CONT;
mopt->mount_opt &= ~OCFS2_MOUNT_ERRORS_PANIC;
ocfs2: add errors=continue OCFS2 is often used in high-availaibility systems. However, ocfs2 converts the filesystem to read-only at the drop of the hat. This may not be necessary, since turning the filesystem read-only would affect other running processes as well, decreasing availability. This attempt is to add errors=continue, which would return the EIO to the calling process and terminate furhter processing so that the filesystem is not corrupted further. However, the filesystem is not converted to read-only. As a future plan, I intend to create a small utility or extend fsck.ocfs2 to fix small errors such as in the inode. The input to the utility such as the inode can come from the kernel logs so we don't have to schedule a downtime for fixing small-enough errors. The patch changes the ocfs2_error to return an error. The error returned depends on the mount option set. If none is set, the default is to turn the filesystem read-only. Perhaps errors=continue is not the best option name. Historically it is used for making an attempt to progress in the current process itself. Should we call it errors=eio? or errors=killproc? Suggestions/Comments welcome. Sources are available at: https://github.com/goldwynr/linux/tree/error-cont Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 00:44:11 +02:00
mopt->mount_opt |= OCFS2_MOUNT_ERRORS_ROFS;
break;
case Opt_err_cont:
mopt->mount_opt &= ~OCFS2_MOUNT_ERRORS_ROFS;
mopt->mount_opt &= ~OCFS2_MOUNT_ERRORS_PANIC;
mopt->mount_opt |= OCFS2_MOUNT_ERRORS_CONT;
break;
case Opt_data_ordered:
mopt->mount_opt &= ~OCFS2_MOUNT_DATA_WRITEBACK;
break;
case Opt_data_writeback:
mopt->mount_opt |= OCFS2_MOUNT_DATA_WRITEBACK;
break;
case Opt_user_xattr:
mopt->mount_opt &= ~OCFS2_MOUNT_NOUSERXATTR;
break;
case Opt_nouser_xattr:
mopt->mount_opt |= OCFS2_MOUNT_NOUSERXATTR;
break;
case Opt_atime_quantum:
if (match_int(&args[0], &option)) {
status = 0;
goto bail;
}
if (option >= 0)
mopt->atime_quantum = option;
break;
case Opt_slot:
if (match_int(&args[0], &option)) {
status = 0;
goto bail;
}
if (option)
mopt->slot = (s16)option;
break;
case Opt_commit:
if (match_int(&args[0], &option)) {
status = 0;
goto bail;
}
if (option < 0)
return 0;
if (option == 0)
option = JBD2_DEFAULT_MAX_COMMIT_AGE;
mopt->commit_interval = HZ * option;
break;
case Opt_localalloc:
if (match_int(&args[0], &option)) {
status = 0;
goto bail;
}
if (option >= 0)
mopt->localalloc_opt = option;
break;
case Opt_localflocks:
/*
* Changing this during remount could race
* flock() requests, or "unbalance" existing
* ones (e.g., a lock is taken in one mode but
* dropped in the other). If users care enough
* to flip locking modes during remount, we
* could add a "local" flag to individual
* flock structures for proper tracking of
* state.
*/
if (!is_remount)
mopt->mount_opt |= OCFS2_MOUNT_LOCALFLOCKS;
break;
case Opt_stack:
/* Check both that the option we were passed
* is of the right length and that it is a proper
* string of the right length.
*/
if (((args[0].to - args[0].from) !=
OCFS2_STACK_LABEL_LEN) ||
(strnlen(args[0].from,
OCFS2_STACK_LABEL_LEN) !=
OCFS2_STACK_LABEL_LEN)) {
mlog(ML_ERROR,
"Invalid cluster_stack option\n");
status = 0;
goto bail;
}
memcpy(mopt->cluster_stack, args[0].from,
OCFS2_STACK_LABEL_LEN);
mopt->cluster_stack[OCFS2_STACK_LABEL_LEN] = '\0';
/*
* Open code the memcmp here as we don't have
* an osb to pass to
* ocfs2_userspace_stack().
*/
if (memcmp(mopt->cluster_stack,
OCFS2_CLASSIC_CLUSTER_STACK,
OCFS2_STACK_LABEL_LEN))
user_stack = 1;
break;
case Opt_inode64:
mopt->mount_opt |= OCFS2_MOUNT_INODE64;
break;
case Opt_usrquota:
mopt->mount_opt |= OCFS2_MOUNT_USRQUOTA;
break;
case Opt_grpquota:
mopt->mount_opt |= OCFS2_MOUNT_GRPQUOTA;
break;
case Opt_coherency_buffered:
mopt->mount_opt |= OCFS2_MOUNT_COHERENCY_BUFFERED;
break;
case Opt_coherency_full:
mopt->mount_opt &= ~OCFS2_MOUNT_COHERENCY_BUFFERED;
break;
case Opt_acl:
mopt->mount_opt |= OCFS2_MOUNT_POSIX_ACL;
mopt->mount_opt &= ~OCFS2_MOUNT_NO_POSIX_ACL;
break;
case Opt_noacl:
mopt->mount_opt |= OCFS2_MOUNT_NO_POSIX_ACL;
mopt->mount_opt &= ~OCFS2_MOUNT_POSIX_ACL;
break;
case Opt_resv_level:
if (is_remount)
break;
if (match_int(&args[0], &option)) {
status = 0;
goto bail;
}
if (option >= OCFS2_MIN_RESV_LEVEL &&
option < OCFS2_MAX_RESV_LEVEL)
mopt->resv_level = option;
break;
case Opt_dir_resv_level:
if (is_remount)
break;
if (match_int(&args[0], &option)) {
status = 0;
goto bail;
}
if (option >= OCFS2_MIN_RESV_LEVEL &&
option < OCFS2_MAX_RESV_LEVEL)
mopt->dir_resv_level = option;
break;
case Opt_journal_async_commit:
mopt->mount_opt |= OCFS2_MOUNT_JOURNAL_ASYNC_COMMIT;
break;
default:
mlog(ML_ERROR,
"Unrecognized mount option \"%s\" "
"or missing value\n", p);
status = 0;
goto bail;
}
}
if (user_stack == 0) {
/* Ensure only one heartbeat mode */
tmp = mopt->mount_opt & (OCFS2_MOUNT_HB_LOCAL |
OCFS2_MOUNT_HB_GLOBAL |
OCFS2_MOUNT_HB_NONE);
if (hweight32(tmp) != 1) {
mlog(ML_ERROR, "Invalid heartbeat mount options\n");
status = 0;
goto bail;
}
}
status = 1;
bail:
return status;
}
static int ocfs2_show_options(struct seq_file *s, struct dentry *root)
{
struct ocfs2_super *osb = OCFS2_SB(root->d_sb);
unsigned long opts = osb->s_mount_opt;
unsigned int local_alloc_megs;
if (opts & (OCFS2_MOUNT_HB_LOCAL | OCFS2_MOUNT_HB_GLOBAL)) {
seq_printf(s, ",_netdev");
if (opts & OCFS2_MOUNT_HB_LOCAL)
seq_printf(s, ",%s", OCFS2_HB_LOCAL);
else
seq_printf(s, ",%s", OCFS2_HB_GLOBAL);
} else
seq_printf(s, ",%s", OCFS2_HB_NONE);
if (opts & OCFS2_MOUNT_NOINTR)
seq_printf(s, ",nointr");
if (opts & OCFS2_MOUNT_DATA_WRITEBACK)
seq_printf(s, ",data=writeback");
else
seq_printf(s, ",data=ordered");
if (opts & OCFS2_MOUNT_BARRIER)
seq_printf(s, ",barrier=1");
if (opts & OCFS2_MOUNT_ERRORS_PANIC)
seq_printf(s, ",errors=panic");
ocfs2: add errors=continue OCFS2 is often used in high-availaibility systems. However, ocfs2 converts the filesystem to read-only at the drop of the hat. This may not be necessary, since turning the filesystem read-only would affect other running processes as well, decreasing availability. This attempt is to add errors=continue, which would return the EIO to the calling process and terminate furhter processing so that the filesystem is not corrupted further. However, the filesystem is not converted to read-only. As a future plan, I intend to create a small utility or extend fsck.ocfs2 to fix small errors such as in the inode. The input to the utility such as the inode can come from the kernel logs so we don't have to schedule a downtime for fixing small-enough errors. The patch changes the ocfs2_error to return an error. The error returned depends on the mount option set. If none is set, the default is to turn the filesystem read-only. Perhaps errors=continue is not the best option name. Historically it is used for making an attempt to progress in the current process itself. Should we call it errors=eio? or errors=killproc? Suggestions/Comments welcome. Sources are available at: https://github.com/goldwynr/linux/tree/error-cont Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 00:44:11 +02:00
else if (opts & OCFS2_MOUNT_ERRORS_CONT)
seq_printf(s, ",errors=continue");
else
seq_printf(s, ",errors=remount-ro");
if (osb->preferred_slot != OCFS2_INVALID_SLOT)
seq_printf(s, ",preferred_slot=%d", osb->preferred_slot);
seq_printf(s, ",atime_quantum=%u", osb->s_atime_quantum);
if (osb->osb_commit_interval)
seq_printf(s, ",commit=%u",
(unsigned) (osb->osb_commit_interval / HZ));
local_alloc_megs = osb->local_alloc_bits >> (20 - osb->s_clustersize_bits);
if (local_alloc_megs != ocfs2_la_default_mb(osb))
seq_printf(s, ",localalloc=%d", local_alloc_megs);
if (opts & OCFS2_MOUNT_LOCALFLOCKS)
seq_printf(s, ",localflocks,");
if (osb->osb_cluster_stack[0])
fs: create and use seq_show_option for escaping Many file systems that implement the show_options hook fail to correctly escape their output which could lead to unescaped characters (e.g. new lines) leaking into /proc/mounts and /proc/[pid]/mountinfo files. This could lead to confusion, spoofed entries (resulting in things like systemd issuing false d-bus "mount" notifications), and who knows what else. This looks like it would only be the root user stepping on themselves, but it's possible weird things could happen in containers or in other situations with delegated mount privileges. Here's an example using overlay with setuid fusermount trusting the contents of /proc/mounts (via the /etc/mtab symlink). Imagine the use of "sudo" is something more sneaky: $ BASE="ovl" $ MNT="$BASE/mnt" $ LOW="$BASE/lower" $ UP="$BASE/upper" $ WORK="$BASE/work/ 0 0 none /proc fuse.pwn user_id=1000" $ mkdir -p "$LOW" "$UP" "$WORK" $ sudo mount -t overlay -o "lowerdir=$LOW,upperdir=$UP,workdir=$WORK" none /mnt $ cat /proc/mounts none /root/ovl/mnt overlay rw,relatime,lowerdir=ovl/lower,upperdir=ovl/upper,workdir=ovl/work/ 0 0 none /proc fuse.pwn user_id=1000 0 0 $ fusermount -u /proc $ cat /proc/mounts cat: /proc/mounts: No such file or directory This fixes the problem by adding new seq_show_option and seq_show_option_n helpers, and updating the vulnerable show_option handlers to use them as needed. Some, like SELinux, need to be open coded due to unusual existing escape mechanisms. [akpm@linux-foundation.org: add lost chunk, per Kees] [keescook@chromium.org: seq_show_option should be using const parameters] Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Acked-by: Jan Kara <jack@suse.com> Acked-by: Paul Moore <paul@paul-moore.com> Cc: J. R. Okajima <hooanon05g@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 00:44:57 +02:00
seq_show_option_n(s, "cluster_stack", osb->osb_cluster_stack,
OCFS2_STACK_LABEL_LEN);
if (opts & OCFS2_MOUNT_USRQUOTA)
seq_printf(s, ",usrquota");
if (opts & OCFS2_MOUNT_GRPQUOTA)
seq_printf(s, ",grpquota");
if (opts & OCFS2_MOUNT_COHERENCY_BUFFERED)
seq_printf(s, ",coherency=buffered");
else
seq_printf(s, ",coherency=full");
if (opts & OCFS2_MOUNT_NOUSERXATTR)
seq_printf(s, ",nouser_xattr");
else
seq_printf(s, ",user_xattr");
if (opts & OCFS2_MOUNT_INODE64)
seq_printf(s, ",inode64");
if (opts & OCFS2_MOUNT_POSIX_ACL)
seq_printf(s, ",acl");
else
seq_printf(s, ",noacl");
if (osb->osb_resv_level != OCFS2_DEFAULT_RESV_LEVEL)
seq_printf(s, ",resv_level=%d", osb->osb_resv_level);
if (osb->osb_dir_resv_level != osb->osb_resv_level)
seq_printf(s, ",dir_resv_level=%d", osb->osb_resv_level);
if (opts & OCFS2_MOUNT_JOURNAL_ASYNC_COMMIT)
seq_printf(s, ",journal_async_commit");
return 0;
}
static int __init ocfs2_init(void)
{
int status;
status = init_ocfs2_uptodate_cache();
if (status < 0)
goto out1;
status = ocfs2_initialize_mem_caches();
if (status < 0)
goto out2;
ocfs2_debugfs_root = debugfs_create_dir("ocfs2", NULL);
if (!ocfs2_debugfs_root) {
status = -ENOMEM;
mlog(ML_ERROR, "Unable to create ocfs2 debugfs root.\n");
ocfs2: fix occurring deadlock by changing ocfs2_wq from global to local This patch fixes a deadlock, as follows: Node 1 Node 2 Node 3 1)volume a and b are only mount vol a only mount vol b mounted 2) start to mount b start to mount a 3) check hb of Node 3 check hb of Node 2 in vol a, qs_holds++ in vol b, qs_holds++ 4) -------------------- all nodes' network down -------------------- 5) progress of mount b the same situation as failed, and then call Node 2 ocfs2_dismount_volume. but the process is hung, since there is a work in ocfs2_wq cannot beo completed. This work is about vol a, because ocfs2_wq is global wq. BTW, this work which is scheduled in ocfs2_wq is ocfs2_orphan_scan_work, and the context in this work needs to take inode lock of orphan_dir, because lockres owner are Node 1 and all nodes' nework has been down at the same time, so it can't get the inode lock. 6) Why can't this node be fenced when network disconnected? Because the process of mount is hung what caused qs_holds is not equal 0. Because all works in the ocfs2_wq are relative to the super block. The solution is to change the ocfs2_wq from global to local. In other words, move it into struct ocfs2_super. Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Xue jiufei <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 22:21:32 +01:00
goto out3;
}
ocfs2_set_locking_protocol();
status = register_quota_format(&ocfs2_quota_format);
if (status < 0)
ocfs2: fix occurring deadlock by changing ocfs2_wq from global to local This patch fixes a deadlock, as follows: Node 1 Node 2 Node 3 1)volume a and b are only mount vol a only mount vol b mounted 2) start to mount b start to mount a 3) check hb of Node 3 check hb of Node 2 in vol a, qs_holds++ in vol b, qs_holds++ 4) -------------------- all nodes' network down -------------------- 5) progress of mount b the same situation as failed, and then call Node 2 ocfs2_dismount_volume. but the process is hung, since there is a work in ocfs2_wq cannot beo completed. This work is about vol a, because ocfs2_wq is global wq. BTW, this work which is scheduled in ocfs2_wq is ocfs2_orphan_scan_work, and the context in this work needs to take inode lock of orphan_dir, because lockres owner are Node 1 and all nodes' nework has been down at the same time, so it can't get the inode lock. 6) Why can't this node be fenced when network disconnected? Because the process of mount is hung what caused qs_holds is not equal 0. Because all works in the ocfs2_wq are relative to the super block. The solution is to change the ocfs2_wq from global to local. In other words, move it into struct ocfs2_super. Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Xue jiufei <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 22:21:32 +01:00
goto out3;
status = register_filesystem(&ocfs2_fs_type);
if (!status)
return 0;
unregister_quota_format(&ocfs2_quota_format);
out3:
ocfs2: fix occurring deadlock by changing ocfs2_wq from global to local This patch fixes a deadlock, as follows: Node 1 Node 2 Node 3 1)volume a and b are only mount vol a only mount vol b mounted 2) start to mount b start to mount a 3) check hb of Node 3 check hb of Node 2 in vol a, qs_holds++ in vol b, qs_holds++ 4) -------------------- all nodes' network down -------------------- 5) progress of mount b the same situation as failed, and then call Node 2 ocfs2_dismount_volume. but the process is hung, since there is a work in ocfs2_wq cannot beo completed. This work is about vol a, because ocfs2_wq is global wq. BTW, this work which is scheduled in ocfs2_wq is ocfs2_orphan_scan_work, and the context in this work needs to take inode lock of orphan_dir, because lockres owner are Node 1 and all nodes' nework has been down at the same time, so it can't get the inode lock. 6) Why can't this node be fenced when network disconnected? Because the process of mount is hung what caused qs_holds is not equal 0. Because all works in the ocfs2_wq are relative to the super block. The solution is to change the ocfs2_wq from global to local. In other words, move it into struct ocfs2_super. Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Xue jiufei <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 22:21:32 +01:00
debugfs_remove(ocfs2_debugfs_root);
ocfs2_free_mem_caches();
out2:
exit_ocfs2_uptodate_cache();
out1:
mlog_errno(status);
return status;
}
static void __exit ocfs2_exit(void)
{
unregister_quota_format(&ocfs2_quota_format);
debugfs_remove(ocfs2_debugfs_root);
ocfs2_free_mem_caches();
unregister_filesystem(&ocfs2_fs_type);
exit_ocfs2_uptodate_cache();
}
static void ocfs2_put_super(struct super_block *sb)
{
trace_ocfs2_put_super(sb);
ocfs2_sync_blockdev(sb);
ocfs2_dismount_volume(sb, 0);
}
static int ocfs2_statfs(struct dentry *dentry, struct kstatfs *buf)
{
struct ocfs2_super *osb;
u32 numbits, freebits;
int status;
struct ocfs2_dinode *bm_lock;
struct buffer_head *bh = NULL;
struct inode *inode = NULL;
trace_ocfs2_statfs(dentry->d_sb, buf);
osb = OCFS2_SB(dentry->d_sb);
inode = ocfs2_get_system_file_inode(osb,
GLOBAL_BITMAP_SYSTEM_INODE,
OCFS2_INVALID_SLOT);
if (!inode) {
mlog(ML_ERROR, "failed to get bitmap inode\n");
status = -EIO;
goto bail;
}
status = ocfs2_inode_lock(inode, &bh, 0);
if (status < 0) {
mlog_errno(status);
goto bail;
}
bm_lock = (struct ocfs2_dinode *) bh->b_data;
numbits = le32_to_cpu(bm_lock->id1.bitmap1.i_total);
freebits = numbits - le32_to_cpu(bm_lock->id1.bitmap1.i_used);
buf->f_type = OCFS2_SUPER_MAGIC;
buf->f_bsize = dentry->d_sb->s_blocksize;
buf->f_namelen = OCFS2_MAX_FILENAME_LEN;
buf->f_blocks = ((sector_t) numbits) *
(osb->s_clustersize >> osb->sb->s_blocksize_bits);
buf->f_bfree = ((sector_t) freebits) *
(osb->s_clustersize >> osb->sb->s_blocksize_bits);
buf->f_bavail = buf->f_bfree;
buf->f_files = numbits;
buf->f_ffree = freebits;
buf->f_fsid.val[0] = crc32_le(0, osb->uuid_str, OCFS2_VOL_UUID_LEN)
& 0xFFFFFFFFUL;
buf->f_fsid.val[1] = crc32_le(0, osb->uuid_str + OCFS2_VOL_UUID_LEN,
OCFS2_VOL_UUID_LEN) & 0xFFFFFFFFUL;
brelse(bh);
ocfs2_inode_unlock(inode, 0);
status = 0;
bail:
iput(inode);
if (status)
mlog_errno(status);
return status;
}
static void ocfs2_inode_init_once(void *data)
{
struct ocfs2_inode_info *oi = data;
oi->ip_flags = 0;
oi->ip_open_count = 0;
spin_lock_init(&oi->ip_lock);
ocfs2_extent_map_init(&oi->vfs_inode);
INIT_LIST_HEAD(&oi->ip_io_markers);
INIT_LIST_HEAD(&oi->ip_unwritten_list);
oi->ip_dir_start_lookup = 0;
init_rwsem(&oi->ip_alloc_sem);
init_rwsem(&oi->ip_xattr_sem);
mutex_init(&oi->ip_io_mutex);
oi->ip_blkno = 0ULL;
oi->ip_clusters = 0;
ocfs2_resv_init_once(&oi->ip_la_data_resv);
ocfs2_lock_res_init_once(&oi->ip_rw_lockres);
ocfs2_lock_res_init_once(&oi->ip_inode_lockres);
ocfs2_lock_res_init_once(&oi->ip_open_lockres);
ocfs2_metadata_cache_init(INODE_CACHE(&oi->vfs_inode),
&ocfs2_inode_caching_ops);
inode_init_once(&oi->vfs_inode);
}
static int ocfs2_initialize_mem_caches(void)
{
ocfs2_inode_cachep = kmem_cache_create("ocfs2_inode_cache",
sizeof(struct ocfs2_inode_info),
0,
(SLAB_HWCACHE_ALIGN|SLAB_RECLAIM_ACCOUNT|
2016-01-15 00:18:21 +01:00
SLAB_MEM_SPREAD|SLAB_ACCOUNT),
ocfs2_inode_init_once);
ocfs2_dquot_cachep = kmem_cache_create("ocfs2_dquot_cache",
sizeof(struct ocfs2_dquot),
0,
(SLAB_HWCACHE_ALIGN|SLAB_RECLAIM_ACCOUNT|
SLAB_MEM_SPREAD),
NULL);
ocfs2_qf_chunk_cachep = kmem_cache_create("ocfs2_qf_chunk_cache",
sizeof(struct ocfs2_quota_chunk),
0,
(SLAB_RECLAIM_ACCOUNT|SLAB_MEM_SPREAD),
NULL);
if (!ocfs2_inode_cachep || !ocfs2_dquot_cachep ||
!ocfs2_qf_chunk_cachep) {
kmem_cache_destroy(ocfs2_inode_cachep);
kmem_cache_destroy(ocfs2_dquot_cachep);
kmem_cache_destroy(ocfs2_qf_chunk_cachep);
return -ENOMEM;
}
return 0;
}
static void ocfs2_free_mem_caches(void)
{
/*
* Make sure all delayed rcu free inodes are flushed before we
* destroy cache.
*/
rcu_barrier();
kmem_cache_destroy(ocfs2_inode_cachep);
ocfs2_inode_cachep = NULL;
kmem_cache_destroy(ocfs2_dquot_cachep);
ocfs2_dquot_cachep = NULL;
kmem_cache_destroy(ocfs2_qf_chunk_cachep);
ocfs2_qf_chunk_cachep = NULL;
}
static int ocfs2_get_sector(struct super_block *sb,
struct buffer_head **bh,
int block,
int sect_size)
{
if (!sb_set_blocksize(sb, sect_size)) {
mlog(ML_ERROR, "unable to set blocksize\n");
return -EIO;
}
*bh = sb_getblk(sb, block);
if (!*bh) {
mlog_errno(-ENOMEM);
return -ENOMEM;
}
lock_buffer(*bh);
if (!buffer_dirty(*bh))
clear_buffer_uptodate(*bh);
unlock_buffer(*bh);
ll_rw_block(REQ_OP_READ, 0, 1, bh);
wait_on_buffer(*bh);
if (!buffer_uptodate(*bh)) {
mlog_errno(-EIO);
brelse(*bh);
*bh = NULL;
return -EIO;
}
return 0;
}
static int ocfs2_mount_volume(struct super_block *sb)
{
int status = 0;
int unlock_super = 0;
struct ocfs2_super *osb = OCFS2_SB(sb);
if (ocfs2_is_hard_readonly(osb))
goto leave;
mutex_init(&osb->obs_trim_fs_mutex);
status = ocfs2_dlm_init(osb);
if (status < 0) {
mlog_errno(status);
ocfs2: give an obvious tip for mismatched cluster names Add an obvious error message, due to mismatched cluster names between on-disk and in the current cluster. We can meet this case during OCFS2 cluster migration. If we can give the user an obvious tip for why they can not mount the file system after migration, they can quickly fix this mismatch problem. Second, also move printing ocfs2_fill_super() errno to the front of ocfs2_dismount_volume(), since ocfs2_dismount_volume() will also print its own message. I looked through all the code of OCFS2 (include o2cb); there is not any place which returns this error. In fact, the function calling path ocfs2_fill_super -> ocfs2_mount_volume -> ocfs2_dlm_init -> dlm_new_lockspace is a very specific one. We can use this errno to give the user a more clear tip, since this case is a little common during cluster migration, but the customer can quickly get the failure cause if there is a error printed. Also, I think it is not possible to add this errno in the o2cb path during ocfs2_dlm_init(), since the o2cb code has been stable for a long time. We only print this error tip when the user uses pcmk stack, since using the o2cb stack the user will not meet this error. [ghe@suse.com: v2] Link: http://lkml.kernel.org/r/1495419305-3780-1-git-send-email-ghe@suse.com Link: http://lkml.kernel.org/r/1495089336-19312-1-git-send-email-ghe@suse.com Signed-off-by: Gang He <ghe@suse.com> Reviewed-by: Mark Fasheh <mfasheh@versity.com> Acked-by: Joseph Qi <jiangqi903@gmail.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-01 01:14:29 +01:00
if (status == -EBADR && ocfs2_userspace_stack(osb))
mlog(ML_ERROR, "couldn't mount because cluster name on"
" disk does not match the running cluster name.\n");
goto leave;
}
status = ocfs2_super_lock(osb, 1);
if (status < 0) {
mlog_errno(status);
goto leave;
}
unlock_super = 1;
/* This will load up the node map and add ourselves to it. */
status = ocfs2_find_slot(osb);
if (status < 0) {
mlog_errno(status);
goto leave;
}
/* load all node-local system inodes */
status = ocfs2_init_local_system_inodes(osb);
if (status < 0) {
mlog_errno(status);
goto leave;
}
status = ocfs2_check_volume(osb);
if (status < 0) {
mlog_errno(status);
goto leave;
}
status = ocfs2_truncate_log_init(osb);
if (status < 0)
mlog_errno(status);
leave:
if (unlock_super)
ocfs2_super_unlock(osb, 1);
return status;
}
static void ocfs2_dismount_volume(struct super_block *sb, int mnt_err)
{
int tmp, hangup_needed = 0;
struct ocfs2_super *osb = NULL;
char nodestr[12];
trace_ocfs2_dismount_volume(sb);
BUG_ON(!sb);
osb = OCFS2_SB(sb);
BUG_ON(!osb);
/* Remove file check sysfs related directores/files,
* and wait for the pending file check operations */
ocfs2_filecheck_remove_sysfs(osb);
kset_unregister(osb->osb_dev_kset);
debugfs_remove(osb->osb_ctxt);
/* Orphan scan should be stopped as early as possible */
ocfs2_orphan_scan_stop(osb);
ocfs2_disable_quotas(osb);
/* All dquots should be freed by now */
WARN_ON(!llist_empty(&osb->dquot_drop_list));
/* Wait for worker to be done with the work structure in osb */
cancel_work_sync(&osb->dquot_drop_work);
ocfs2_shutdown_local_alloc(osb);
ocfs2_truncate_log_shutdown(osb);
/* This will disable recovery and flush any recovery work. */
ocfs2_recovery_exit(osb);
ocfs2_journal_shutdown(osb);
ocfs2_sync_blockdev(sb);
ocfs2_purge_refcount_trees(osb);
/* No cluster connection means we've failed during mount, so skip
* all the steps which depended on that to complete. */
if (osb->cconn) {
tmp = ocfs2_super_lock(osb, 1);
if (tmp < 0) {
mlog_errno(tmp);
return;
}
}
if (osb->slot_num != OCFS2_INVALID_SLOT)
ocfs2_put_slot(osb);
if (osb->cconn)
ocfs2_super_unlock(osb, 1);
ocfs2_release_system_inodes(osb);
/*
* If we're dismounting due to mount error, mount.ocfs2 will clean
* up heartbeat. If we're a local mount, there is no heartbeat.
* If we failed before we got a uuid_str yet, we can't stop
* heartbeat. Otherwise, do it.
*/
if (!mnt_err && !ocfs2_mount_local(osb) && osb->uuid_str &&
!ocfs2_is_hard_readonly(osb))
hangup_needed = 1;
if (osb->cconn)
ocfs2_dlm_shutdown(osb, hangup_needed);
ocfs2_blockcheck_stats_debugfs_remove(&osb->osb_ecc_stats);
debugfs_remove(osb->osb_debug_root);
if (hangup_needed)
ocfs2_cluster_hangup(osb->uuid_str, strlen(osb->uuid_str));
atomic_set(&osb->vol_state, VOLUME_DISMOUNTED);
if (ocfs2_mount_local(osb))
snprintf(nodestr, sizeof(nodestr), "local");
else
snprintf(nodestr, sizeof(nodestr), "%u", osb->node_num);
printk(KERN_INFO "ocfs2: Unmounting device (%s) on (node %s)\n",
osb->dev_str, nodestr);
ocfs2_delete_osb(osb);
kfree(osb);
sb->s_dev = 0;
sb->s_fs_info = NULL;
}
static int ocfs2_setup_osb_uuid(struct ocfs2_super *osb, const unsigned char *uuid,
unsigned uuid_bytes)
{
int i, ret;
char *ptr;
BUG_ON(uuid_bytes != OCFS2_VOL_UUID_LEN);
osb->uuid_str = kzalloc(OCFS2_VOL_UUID_LEN * 2 + 1, GFP_KERNEL);
if (osb->uuid_str == NULL)
return -ENOMEM;
for (i = 0, ptr = osb->uuid_str; i < OCFS2_VOL_UUID_LEN; i++) {
/* print with null */
ret = snprintf(ptr, 3, "%02X", uuid[i]);
if (ret != 2) /* drop super cleans up */
return -EINVAL;
/* then only advance past the last char */
ptr += 2;
}
return 0;
}
/* Make sure entire volume is addressable by our journal. Requires
osb_clusters_at_boot to be valid and for the journal to have been
initialized by ocfs2_journal_init(). */
static int ocfs2_journal_addressable(struct ocfs2_super *osb)
{
int status = 0;
u64 max_block =
ocfs2_clusters_to_blocks(osb->sb,
osb->osb_clusters_at_boot) - 1;
/* 32-bit block number is always OK. */
if (max_block <= (u32)~0ULL)
goto out;
/* Volume is "huge", so see if our journal is new enough to
support it. */
if (!(OCFS2_HAS_COMPAT_FEATURE(osb->sb,
OCFS2_FEATURE_COMPAT_JBD2_SB) &&
jbd2_journal_check_used_features(osb->journal->j_journal, 0, 0,
JBD2_FEATURE_INCOMPAT_64BIT))) {
mlog(ML_ERROR, "The journal cannot address the entire volume. "
"Enable the 'block64' journal option with tunefs.ocfs2");
status = -EFBIG;
goto out;
}
out:
return status;
}
static int ocfs2_initialize_super(struct super_block *sb,
struct buffer_head *bh,
int sector_size,
struct ocfs2_blockcheck_stats *stats)
{
int status;
int i, cbits, bbits;
struct ocfs2_dinode *di = (struct ocfs2_dinode *)bh->b_data;
struct inode *inode = NULL;
struct ocfs2_journal *journal;
struct ocfs2_super *osb;
u64 total_blocks;
osb = kzalloc(sizeof(struct ocfs2_super), GFP_KERNEL);
if (!osb) {
status = -ENOMEM;
mlog_errno(status);
goto bail;
}
sb->s_fs_info = osb;
sb->s_op = &ocfs2_sops;
sb->s_d_op = &ocfs2_dentry_ops;
sb->s_export_op = &ocfs2_export_ops;
sb->s_qcop = &dquot_quotactl_sysfile_ops;
sb->dq_op = &ocfs2_quota_operations;
sb->s_quota_types = QTYPE_MASK_USR | QTYPE_MASK_GRP;
sb->s_xattr = ocfs2_xattr_handlers;
sb->s_time_gran = 1;
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27 22:05:09 +01:00
sb->s_flags |= SB_NOATIME;
/* this is needed to support O_LARGEFILE */
cbits = le32_to_cpu(di->id2.i_super.s_clustersize_bits);
bbits = le32_to_cpu(di->id2.i_super.s_blocksize_bits);
sb->s_maxbytes = ocfs2_max_file_offset(bbits, cbits);
memcpy(&sb->s_uuid, di->id2.i_super.s_uuid,
sizeof(di->id2.i_super.s_uuid));
osb->osb_dx_mask = (1 << (cbits - bbits)) - 1;
for (i = 0; i < 3; i++)
osb->osb_dx_seed[i] = le32_to_cpu(di->id2.i_super.s_dx_seed[i]);
osb->osb_dx_seed[3] = le32_to_cpu(di->id2.i_super.s_uuid_hash);
osb->sb = sb;
osb->s_sectsize_bits = blksize_bits(sector_size);
BUG_ON(!osb->s_sectsize_bits);
spin_lock_init(&osb->dc_task_lock);
init_waitqueue_head(&osb->dc_event);
osb->dc_work_sequence = 0;
osb->dc_wake_sequence = 0;
INIT_LIST_HEAD(&osb->blocked_lock_list);
osb->blocked_lock_count = 0;
spin_lock_init(&osb->osb_lock);
spin_lock_init(&osb->osb_xattr_lock);
ocfs2_init_steal_slots(osb);
mutex_init(&osb->system_file_mutex);
atomic_set(&osb->alloc_stats.moves, 0);
atomic_set(&osb->alloc_stats.local_data, 0);
atomic_set(&osb->alloc_stats.bitmap_data, 0);
atomic_set(&osb->alloc_stats.bg_allocs, 0);
atomic_set(&osb->alloc_stats.bg_extends, 0);
/* Copy the blockcheck stats from the superblock probe */
osb->osb_ecc_stats = *stats;
ocfs2_init_node_maps(osb);
snprintf(osb->dev_str, sizeof(osb->dev_str), "%u,%u",
MAJOR(osb->sb->s_dev), MINOR(osb->sb->s_dev));
osb->max_slots = le16_to_cpu(di->id2.i_super.s_max_slots);
if (osb->max_slots > OCFS2_MAX_SLOTS || osb->max_slots == 0) {
mlog(ML_ERROR, "Invalid number of node slots (%u)\n",
osb->max_slots);
status = -EINVAL;
goto bail;
}
ocfs2_orphan_scan_init(osb);
status = ocfs2_recovery_init(osb);
if (status) {
mlog(ML_ERROR, "Unable to initialize recovery state\n");
mlog_errno(status);
goto bail;
}
init_waitqueue_head(&osb->checkpoint_event);
osb->s_atime_quantum = OCFS2_DEFAULT_ATIME_QUANTUM;
osb->slot_num = OCFS2_INVALID_SLOT;
osb->s_xattr_inline_size = le16_to_cpu(
di->id2.i_super.s_xattr_inline_size);
osb->local_alloc_state = OCFS2_LA_UNUSED;
osb->local_alloc_bh = NULL;
INIT_DELAYED_WORK(&osb->la_enable_wq, ocfs2_la_enable_worker);
init_waitqueue_head(&osb->osb_mount_event);
status = ocfs2_resmap_init(osb, &osb->osb_la_resmap);
if (status) {
mlog_errno(status);
goto bail;
}
osb->vol_label = kmalloc(OCFS2_MAX_VOL_LABEL_LEN, GFP_KERNEL);
if (!osb->vol_label) {
mlog(ML_ERROR, "unable to alloc vol label\n");
status = -ENOMEM;
goto bail;
}
osb->slot_recovery_generations =
kcalloc(osb->max_slots, sizeof(*osb->slot_recovery_generations),
GFP_KERNEL);
if (!osb->slot_recovery_generations) {
status = -ENOMEM;
mlog_errno(status);
goto bail;
}
init_waitqueue_head(&osb->osb_wipe_event);
osb->osb_orphan_wipes = kcalloc(osb->max_slots,
sizeof(*osb->osb_orphan_wipes),
GFP_KERNEL);
if (!osb->osb_orphan_wipes) {
status = -ENOMEM;
mlog_errno(status);
goto bail;
}
osb->osb_rf_lock_tree = RB_ROOT;
osb->s_feature_compat =
le32_to_cpu(OCFS2_RAW_SB(di)->s_feature_compat);
osb->s_feature_ro_compat =
le32_to_cpu(OCFS2_RAW_SB(di)->s_feature_ro_compat);
osb->s_feature_incompat =
le32_to_cpu(OCFS2_RAW_SB(di)->s_feature_incompat);
if ((i = OCFS2_HAS_INCOMPAT_FEATURE(osb->sb, ~OCFS2_FEATURE_INCOMPAT_SUPP))) {
mlog(ML_ERROR, "couldn't mount because of unsupported "
"optional features (%x).\n", i);
status = -EINVAL;
goto bail;
}
if (!sb_rdonly(osb->sb) && (i = OCFS2_HAS_RO_COMPAT_FEATURE(osb->sb, ~OCFS2_FEATURE_RO_COMPAT_SUPP))) {
mlog(ML_ERROR, "couldn't mount RDWR because of "
"unsupported optional features (%x).\n", i);
status = -EINVAL;
goto bail;
}
if (ocfs2_clusterinfo_valid(osb)) {
osb->osb_stackflags =
OCFS2_RAW_SB(di)->s_cluster_info.ci_stackflags;
ocfs2: add clustername to cluster connection This is an effort of removing ocfs2_controld.pcmk and getting ocfs2 DLM handling up to the times with respect to DLM (>=4.0.1) and corosync (2.3.x). AFAIK, cman also is being phased out for a unified corosync cluster stack. fs/dlm performs all the functions with respect to fencing and node management and provides the API's to do so for ocfs2. For all future references, DLM stands for fs/dlm code. The advantages are: + No need to run an additional userspace daemon (ocfs2_controld) + No controld device handling and controld protocol + Shifting responsibilities of node management to DLM layer For backward compatibility, we are keeping the controld handling code. Once enough time has passed we can remove a significant portion of the code. This was tested by using the kernel with changes on older unmodified tools. The kernel used ocfs2_controld as expected, and displayed the appropriate warning message. This feature requires modification in the userspace ocfs2-tools. The changes can be found at: https://github.com/goldwynr/ocfs2-tools branch: nocontrold Currently, not many checks are present in the userspace code, but that would change soon. This patch (of 6): Add clustername to cluster connection. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-22 00:48:21 +01:00
strlcpy(osb->osb_cluster_stack,
OCFS2_RAW_SB(di)->s_cluster_info.ci_stack,
ocfs2: add clustername to cluster connection This is an effort of removing ocfs2_controld.pcmk and getting ocfs2 DLM handling up to the times with respect to DLM (>=4.0.1) and corosync (2.3.x). AFAIK, cman also is being phased out for a unified corosync cluster stack. fs/dlm performs all the functions with respect to fencing and node management and provides the API's to do so for ocfs2. For all future references, DLM stands for fs/dlm code. The advantages are: + No need to run an additional userspace daemon (ocfs2_controld) + No controld device handling and controld protocol + Shifting responsibilities of node management to DLM layer For backward compatibility, we are keeping the controld handling code. Once enough time has passed we can remove a significant portion of the code. This was tested by using the kernel with changes on older unmodified tools. The kernel used ocfs2_controld as expected, and displayed the appropriate warning message. This feature requires modification in the userspace ocfs2-tools. The changes can be found at: https://github.com/goldwynr/ocfs2-tools branch: nocontrold Currently, not many checks are present in the userspace code, but that would change soon. This patch (of 6): Add clustername to cluster connection. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-22 00:48:21 +01:00
OCFS2_STACK_LABEL_LEN + 1);
if (strlen(osb->osb_cluster_stack) != OCFS2_STACK_LABEL_LEN) {
mlog(ML_ERROR,
"couldn't mount because of an invalid "
"cluster stack label (%s) \n",
osb->osb_cluster_stack);
status = -EINVAL;
goto bail;
}
ocfs2: add clustername to cluster connection This is an effort of removing ocfs2_controld.pcmk and getting ocfs2 DLM handling up to the times with respect to DLM (>=4.0.1) and corosync (2.3.x). AFAIK, cman also is being phased out for a unified corosync cluster stack. fs/dlm performs all the functions with respect to fencing and node management and provides the API's to do so for ocfs2. For all future references, DLM stands for fs/dlm code. The advantages are: + No need to run an additional userspace daemon (ocfs2_controld) + No controld device handling and controld protocol + Shifting responsibilities of node management to DLM layer For backward compatibility, we are keeping the controld handling code. Once enough time has passed we can remove a significant portion of the code. This was tested by using the kernel with changes on older unmodified tools. The kernel used ocfs2_controld as expected, and displayed the appropriate warning message. This feature requires modification in the userspace ocfs2-tools. The changes can be found at: https://github.com/goldwynr/ocfs2-tools branch: nocontrold Currently, not many checks are present in the userspace code, but that would change soon. This patch (of 6): Add clustername to cluster connection. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-22 00:48:21 +01:00
strlcpy(osb->osb_cluster_name,
OCFS2_RAW_SB(di)->s_cluster_info.ci_cluster,
OCFS2_CLUSTER_NAME_LEN + 1);
} else {
/* The empty string is identical with classic tools that
* don't know about s_cluster_info. */
osb->osb_cluster_stack[0] = '\0';
}
get_random_bytes(&osb->s_next_generation, sizeof(u32));
/* FIXME
* This should be done in ocfs2_journal_init(), but unknown
* ordering issues will cause the filesystem to crash.
* If anyone wants to figure out what part of the code
* refers to osb->journal before ocfs2_journal_init() is run,
* be my guest.
*/
/* initialize our journal structure */
journal = kzalloc(sizeof(struct ocfs2_journal), GFP_KERNEL);
if (!journal) {
mlog(ML_ERROR, "unable to alloc journal\n");
status = -ENOMEM;
goto bail;
}
osb->journal = journal;
journal->j_osb = osb;
atomic_set(&journal->j_num_trans, 0);
init_rwsem(&journal->j_trans_barrier);
init_waitqueue_head(&journal->j_checkpointed);
spin_lock_init(&journal->j_lock);
journal->j_trans_id = (unsigned long) 1;
INIT_LIST_HEAD(&journal->j_la_cleanups);
INIT_WORK(&journal->j_recovery_work, ocfs2_complete_recovery);
journal->j_state = OCFS2_JOURNAL_FREE;
INIT_WORK(&osb->dquot_drop_work, ocfs2_drop_dquot_refs);
init_llist_head(&osb->dquot_drop_list);
/* get some pseudo constants for clustersize bits */
osb->s_clustersize_bits =
le32_to_cpu(di->id2.i_super.s_clustersize_bits);
osb->s_clustersize = 1 << osb->s_clustersize_bits;
if (osb->s_clustersize < OCFS2_MIN_CLUSTERSIZE ||
osb->s_clustersize > OCFS2_MAX_CLUSTERSIZE) {
mlog(ML_ERROR, "Volume has invalid cluster size (%d)\n",
osb->s_clustersize);
status = -EINVAL;
goto bail;
}
total_blocks = ocfs2_clusters_to_blocks(osb->sb,
le32_to_cpu(di->i_clusters));
status = generic_check_addressable(osb->sb->s_blocksize_bits,
total_blocks);
if (status) {
mlog(ML_ERROR, "Volume too large "
"to mount safely on this system");
status = -EFBIG;
goto bail;
}
if (ocfs2_setup_osb_uuid(osb, di->id2.i_super.s_uuid,
sizeof(di->id2.i_super.s_uuid))) {
mlog(ML_ERROR, "Out of memory trying to setup our uuid.\n");
status = -ENOMEM;
goto bail;
}
strlcpy(osb->vol_label, di->id2.i_super.s_label,
OCFS2_MAX_VOL_LABEL_LEN);
osb->root_blkno = le64_to_cpu(di->id2.i_super.s_root_blkno);
osb->system_dir_blkno = le64_to_cpu(di->id2.i_super.s_system_dir_blkno);
osb->first_cluster_group_blkno =
le64_to_cpu(di->id2.i_super.s_first_cluster_group);
osb->fs_generation = le32_to_cpu(di->i_fs_generation);
osb->uuid_hash = le32_to_cpu(di->id2.i_super.s_uuid_hash);
trace_ocfs2_initialize_super(osb->vol_label, osb->uuid_str,
(unsigned long long)osb->root_blkno,
(unsigned long long)osb->system_dir_blkno,
osb->s_clustersize_bits);
osb->osb_dlm_debug = ocfs2_new_dlm_debug();
if (!osb->osb_dlm_debug) {
status = -ENOMEM;
mlog_errno(status);
goto bail;
}
atomic_set(&osb->vol_state, VOLUME_INIT);
/* load root, system_dir, and all global system inodes */
status = ocfs2_init_global_system_inodes(osb);
if (status < 0) {
mlog_errno(status);
goto bail;
}
/*
* global bitmap
*/
inode = ocfs2_get_system_file_inode(osb, GLOBAL_BITMAP_SYSTEM_INODE,
OCFS2_INVALID_SLOT);
if (!inode) {
status = -EINVAL;
mlog_errno(status);
goto bail;
}
osb->bitmap_blkno = OCFS2_I(inode)->ip_blkno;
osb->osb_clusters_at_boot = OCFS2_I(inode)->ip_clusters;
iput(inode);
osb->bitmap_cpg = ocfs2_group_bitmap_size(sb, 0,
osb->s_feature_incompat) * 8;
status = ocfs2_init_slot_info(osb);
if (status < 0) {
mlog_errno(status);
goto bail;
}
cleancache_init_shared_fs(sb);
osb->ocfs2_wq = alloc_ordered_workqueue("ocfs2_wq", WQ_MEM_RECLAIM);
ocfs2: fix occurring deadlock by changing ocfs2_wq from global to local This patch fixes a deadlock, as follows: Node 1 Node 2 Node 3 1)volume a and b are only mount vol a only mount vol b mounted 2) start to mount b start to mount a 3) check hb of Node 3 check hb of Node 2 in vol a, qs_holds++ in vol b, qs_holds++ 4) -------------------- all nodes' network down -------------------- 5) progress of mount b the same situation as failed, and then call Node 2 ocfs2_dismount_volume. but the process is hung, since there is a work in ocfs2_wq cannot beo completed. This work is about vol a, because ocfs2_wq is global wq. BTW, this work which is scheduled in ocfs2_wq is ocfs2_orphan_scan_work, and the context in this work needs to take inode lock of orphan_dir, because lockres owner are Node 1 and all nodes' nework has been down at the same time, so it can't get the inode lock. 6) Why can't this node be fenced when network disconnected? Because the process of mount is hung what caused qs_holds is not equal 0. Because all works in the ocfs2_wq are relative to the super block. The solution is to change the ocfs2_wq from global to local. In other words, move it into struct ocfs2_super. Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Xue jiufei <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 22:21:32 +01:00
if (!osb->ocfs2_wq) {
status = -ENOMEM;
mlog_errno(status);
}
bail:
return status;
}
/*
* will return: -EAGAIN if it is ok to keep searching for superblocks
* -EINVAL if there is a bad superblock
* 0 on success
*/
static int ocfs2_verify_volume(struct ocfs2_dinode *di,
struct buffer_head *bh,
u32 blksz,
struct ocfs2_blockcheck_stats *stats)
{
int status = -EAGAIN;
if (memcmp(di->i_signature, OCFS2_SUPER_BLOCK_SIGNATURE,
strlen(OCFS2_SUPER_BLOCK_SIGNATURE)) == 0) {
/* We have to do a raw check of the feature here */
if (le32_to_cpu(di->id2.i_super.s_feature_incompat) &
OCFS2_FEATURE_INCOMPAT_META_ECC) {
status = ocfs2_block_check_validate(bh->b_data,
bh->b_size,
&di->i_check,
stats);
if (status)
goto out;
}
status = -EINVAL;
if ((1 << le32_to_cpu(di->id2.i_super.s_blocksize_bits)) != blksz) {
mlog(ML_ERROR, "found superblock with incorrect block "
"size: found %u, should be %u\n",
1 << le32_to_cpu(di->id2.i_super.s_blocksize_bits),
blksz);
} else if (le16_to_cpu(di->id2.i_super.s_major_rev_level) !=
OCFS2_MAJOR_REV_LEVEL ||
le16_to_cpu(di->id2.i_super.s_minor_rev_level) !=
OCFS2_MINOR_REV_LEVEL) {
mlog(ML_ERROR, "found superblock with bad version: "
"found %u.%u, should be %u.%u\n",
le16_to_cpu(di->id2.i_super.s_major_rev_level),
le16_to_cpu(di->id2.i_super.s_minor_rev_level),
OCFS2_MAJOR_REV_LEVEL,
OCFS2_MINOR_REV_LEVEL);
} else if (bh->b_blocknr != le64_to_cpu(di->i_blkno)) {
mlog(ML_ERROR, "bad block number on superblock: "
"found %llu, should be %llu\n",
(unsigned long long)le64_to_cpu(di->i_blkno),
(unsigned long long)bh->b_blocknr);
} else if (le32_to_cpu(di->id2.i_super.s_clustersize_bits) < 12 ||
le32_to_cpu(di->id2.i_super.s_clustersize_bits) > 20) {
mlog(ML_ERROR, "bad cluster size found: %u\n",
1 << le32_to_cpu(di->id2.i_super.s_clustersize_bits));
} else if (!le64_to_cpu(di->id2.i_super.s_root_blkno)) {
mlog(ML_ERROR, "bad root_blkno: 0\n");
} else if (!le64_to_cpu(di->id2.i_super.s_system_dir_blkno)) {
mlog(ML_ERROR, "bad system_dir_blkno: 0\n");
} else if (le16_to_cpu(di->id2.i_super.s_max_slots) > OCFS2_MAX_SLOTS) {
mlog(ML_ERROR,
"Superblock slots found greater than file system "
"maximum: found %u, max %u\n",
le16_to_cpu(di->id2.i_super.s_max_slots),
OCFS2_MAX_SLOTS);
} else {
/* found it! */
status = 0;
}
}
out:
if (status && status != -EAGAIN)
mlog_errno(status);
return status;
}
static int ocfs2_check_volume(struct ocfs2_super *osb)
{
int status;
int dirty;
int local;
struct ocfs2_dinode *local_alloc = NULL; /* only used if we
* recover
* ourselves. */
/* Init our journal object. */
status = ocfs2_journal_init(osb->journal, &dirty);
if (status < 0) {
mlog(ML_ERROR, "Could not initialize journal!\n");
goto finally;
}
/* Now that journal has been initialized, check to make sure
entire volume is addressable. */
status = ocfs2_journal_addressable(osb);
if (status)
goto finally;
/* If the journal was unmounted cleanly then we don't want to
* recover anything. Otherwise, journal_load will do that
* dirty work for us :) */
if (!dirty) {
status = ocfs2_journal_wipe(osb->journal, 0);
if (status < 0) {
mlog_errno(status);
goto finally;
}
} else {
printk(KERN_NOTICE "ocfs2: File system on device (%s) was not "
"unmounted cleanly, recovering it.\n", osb->dev_str);
}
local = ocfs2_mount_local(osb);
/* will play back anything left in the journal. */
status = ocfs2_journal_load(osb->journal, local, dirty);
if (status < 0) {
mlog(ML_ERROR, "ocfs2 journal load failed! %d\n", status);
goto finally;
}
if (osb->s_mount_opt & OCFS2_MOUNT_JOURNAL_ASYNC_COMMIT)
jbd2_journal_set_features(osb->journal->j_journal,
JBD2_FEATURE_COMPAT_CHECKSUM, 0,
JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT);
else
jbd2_journal_clear_features(osb->journal->j_journal,
JBD2_FEATURE_COMPAT_CHECKSUM, 0,
JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT);
if (dirty) {
/* recover my local alloc if we didn't unmount cleanly. */
status = ocfs2_begin_local_alloc_recovery(osb,
osb->slot_num,
&local_alloc);
if (status < 0) {
mlog_errno(status);
goto finally;
}
/* we complete the recovery process after we've marked
* ourselves as mounted. */
}
status = ocfs2_load_local_alloc(osb);
if (status < 0) {
mlog_errno(status);
goto finally;
}
if (dirty) {
/* Recovery will be completed after we've mounted the
* rest of the volume. */
osb->local_alloc_copy = local_alloc;
local_alloc = NULL;
}
/* go through each journal, trylock it and if you get the
* lock, and it's marked as dirty, set the bit in the recover
* map and launch a recovery thread for it. */
status = ocfs2_mark_dead_nodes(osb);
if (status < 0) {
mlog_errno(status);
goto finally;
}
status = ocfs2_compute_replay_slots(osb);
if (status < 0)
mlog_errno(status);
finally:
kfree(local_alloc);
if (status)
mlog_errno(status);
return status;
}
/*
* The routine gets called from dismount or close whenever a dismount on
* volume is requested and the osb open count becomes 1.
* It will remove the osb from the global list and also free up all the
* initialized resources and fileobject.
*/
static void ocfs2_delete_osb(struct ocfs2_super *osb)
{
/* This function assumes that the caller has the main osb resource */
ocfs2: fix occurring deadlock by changing ocfs2_wq from global to local This patch fixes a deadlock, as follows: Node 1 Node 2 Node 3 1)volume a and b are only mount vol a only mount vol b mounted 2) start to mount b start to mount a 3) check hb of Node 3 check hb of Node 2 in vol a, qs_holds++ in vol b, qs_holds++ 4) -------------------- all nodes' network down -------------------- 5) progress of mount b the same situation as failed, and then call Node 2 ocfs2_dismount_volume. but the process is hung, since there is a work in ocfs2_wq cannot beo completed. This work is about vol a, because ocfs2_wq is global wq. BTW, this work which is scheduled in ocfs2_wq is ocfs2_orphan_scan_work, and the context in this work needs to take inode lock of orphan_dir, because lockres owner are Node 1 and all nodes' nework has been down at the same time, so it can't get the inode lock. 6) Why can't this node be fenced when network disconnected? Because the process of mount is hung what caused qs_holds is not equal 0. Because all works in the ocfs2_wq are relative to the super block. The solution is to change the ocfs2_wq from global to local. In other words, move it into struct ocfs2_super. Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Xue jiufei <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 22:21:32 +01:00
/* ocfs2_initializer_super have already created this workqueue */
if (osb->ocfs2_wq)
ocfs2: fix occurring deadlock by changing ocfs2_wq from global to local This patch fixes a deadlock, as follows: Node 1 Node 2 Node 3 1)volume a and b are only mount vol a only mount vol b mounted 2) start to mount b start to mount a 3) check hb of Node 3 check hb of Node 2 in vol a, qs_holds++ in vol b, qs_holds++ 4) -------------------- all nodes' network down -------------------- 5) progress of mount b the same situation as failed, and then call Node 2 ocfs2_dismount_volume. but the process is hung, since there is a work in ocfs2_wq cannot beo completed. This work is about vol a, because ocfs2_wq is global wq. BTW, this work which is scheduled in ocfs2_wq is ocfs2_orphan_scan_work, and the context in this work needs to take inode lock of orphan_dir, because lockres owner are Node 1 and all nodes' nework has been down at the same time, so it can't get the inode lock. 6) Why can't this node be fenced when network disconnected? Because the process of mount is hung what caused qs_holds is not equal 0. Because all works in the ocfs2_wq are relative to the super block. The solution is to change the ocfs2_wq from global to local. In other words, move it into struct ocfs2_super. Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Xue jiufei <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 22:21:32 +01:00
destroy_workqueue(osb->ocfs2_wq);
ocfs2_free_slot_info(osb);
kfree(osb->osb_orphan_wipes);
kfree(osb->slot_recovery_generations);
/* FIXME
* This belongs in journal shutdown, but because we have to
* allocate osb->journal at the start of ocfs2_initialize_osb(),
* we free it here.
*/
kfree(osb->journal);
kfree(osb->local_alloc_copy);
kfree(osb->uuid_str);
kfree(osb->vol_label);
ocfs2_put_dlm_debug(osb->osb_dlm_debug);
memset(osb, 0, sizeof(struct ocfs2_super));
}
ocfs2: add errors=continue OCFS2 is often used in high-availaibility systems. However, ocfs2 converts the filesystem to read-only at the drop of the hat. This may not be necessary, since turning the filesystem read-only would affect other running processes as well, decreasing availability. This attempt is to add errors=continue, which would return the EIO to the calling process and terminate furhter processing so that the filesystem is not corrupted further. However, the filesystem is not converted to read-only. As a future plan, I intend to create a small utility or extend fsck.ocfs2 to fix small errors such as in the inode. The input to the utility such as the inode can come from the kernel logs so we don't have to schedule a downtime for fixing small-enough errors. The patch changes the ocfs2_error to return an error. The error returned depends on the mount option set. If none is set, the default is to turn the filesystem read-only. Perhaps errors=continue is not the best option name. Historically it is used for making an attempt to progress in the current process itself. Should we call it errors=eio? or errors=killproc? Suggestions/Comments welcome. Sources are available at: https://github.com/goldwynr/linux/tree/error-cont Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 00:44:11 +02:00
/* Depending on the mount option passed, perform one of the following:
* Put OCFS2 into a readonly state (default)
* Return EIO so that only the process errs
* Fix the error as if fsck.ocfs2 -y
* panic
*/
static int ocfs2_handle_error(struct super_block *sb)
{
struct ocfs2_super *osb = OCFS2_SB(sb);
ocfs2: add errors=continue OCFS2 is often used in high-availaibility systems. However, ocfs2 converts the filesystem to read-only at the drop of the hat. This may not be necessary, since turning the filesystem read-only would affect other running processes as well, decreasing availability. This attempt is to add errors=continue, which would return the EIO to the calling process and terminate furhter processing so that the filesystem is not corrupted further. However, the filesystem is not converted to read-only. As a future plan, I intend to create a small utility or extend fsck.ocfs2 to fix small errors such as in the inode. The input to the utility such as the inode can come from the kernel logs so we don't have to schedule a downtime for fixing small-enough errors. The patch changes the ocfs2_error to return an error. The error returned depends on the mount option set. If none is set, the default is to turn the filesystem read-only. Perhaps errors=continue is not the best option name. Historically it is used for making an attempt to progress in the current process itself. Should we call it errors=eio? or errors=killproc? Suggestions/Comments welcome. Sources are available at: https://github.com/goldwynr/linux/tree/error-cont Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 00:44:11 +02:00
int rv = 0;
ocfs2_set_osb_flag(osb, OCFS2_OSB_ERROR_FS);
ocfs2: add errors=continue OCFS2 is often used in high-availaibility systems. However, ocfs2 converts the filesystem to read-only at the drop of the hat. This may not be necessary, since turning the filesystem read-only would affect other running processes as well, decreasing availability. This attempt is to add errors=continue, which would return the EIO to the calling process and terminate furhter processing so that the filesystem is not corrupted further. However, the filesystem is not converted to read-only. As a future plan, I intend to create a small utility or extend fsck.ocfs2 to fix small errors such as in the inode. The input to the utility such as the inode can come from the kernel logs so we don't have to schedule a downtime for fixing small-enough errors. The patch changes the ocfs2_error to return an error. The error returned depends on the mount option set. If none is set, the default is to turn the filesystem read-only. Perhaps errors=continue is not the best option name. Historically it is used for making an attempt to progress in the current process itself. Should we call it errors=eio? or errors=killproc? Suggestions/Comments welcome. Sources are available at: https://github.com/goldwynr/linux/tree/error-cont Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 00:44:11 +02:00
pr_crit("On-disk corruption discovered. "
"Please run fsck.ocfs2 once the filesystem is unmounted.\n");
ocfs2: add errors=continue OCFS2 is often used in high-availaibility systems. However, ocfs2 converts the filesystem to read-only at the drop of the hat. This may not be necessary, since turning the filesystem read-only would affect other running processes as well, decreasing availability. This attempt is to add errors=continue, which would return the EIO to the calling process and terminate furhter processing so that the filesystem is not corrupted further. However, the filesystem is not converted to read-only. As a future plan, I intend to create a small utility or extend fsck.ocfs2 to fix small errors such as in the inode. The input to the utility such as the inode can come from the kernel logs so we don't have to schedule a downtime for fixing small-enough errors. The patch changes the ocfs2_error to return an error. The error returned depends on the mount option set. If none is set, the default is to turn the filesystem read-only. Perhaps errors=continue is not the best option name. Historically it is used for making an attempt to progress in the current process itself. Should we call it errors=eio? or errors=killproc? Suggestions/Comments welcome. Sources are available at: https://github.com/goldwynr/linux/tree/error-cont Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 00:44:11 +02:00
if (osb->s_mount_opt & OCFS2_MOUNT_ERRORS_PANIC) {
panic("OCFS2: (device %s): panic forced after error\n",
sb->s_id);
} else if (osb->s_mount_opt & OCFS2_MOUNT_ERRORS_CONT) {
pr_crit("OCFS2: Returning error to the calling process.\n");
rv = -EIO;
} else { /* default option */
rv = -EROFS;
if (sb_rdonly(sb) && (ocfs2_is_soft_readonly(osb) || ocfs2_is_hard_readonly(osb)))
ocfs2: add errors=continue OCFS2 is often used in high-availaibility systems. However, ocfs2 converts the filesystem to read-only at the drop of the hat. This may not be necessary, since turning the filesystem read-only would affect other running processes as well, decreasing availability. This attempt is to add errors=continue, which would return the EIO to the calling process and terminate furhter processing so that the filesystem is not corrupted further. However, the filesystem is not converted to read-only. As a future plan, I intend to create a small utility or extend fsck.ocfs2 to fix small errors such as in the inode. The input to the utility such as the inode can come from the kernel logs so we don't have to schedule a downtime for fixing small-enough errors. The patch changes the ocfs2_error to return an error. The error returned depends on the mount option set. If none is set, the default is to turn the filesystem read-only. Perhaps errors=continue is not the best option name. Historically it is used for making an attempt to progress in the current process itself. Should we call it errors=eio? or errors=killproc? Suggestions/Comments welcome. Sources are available at: https://github.com/goldwynr/linux/tree/error-cont Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 00:44:11 +02:00
return rv;
pr_crit("OCFS2: File system is now read-only.\n");
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27 22:05:09 +01:00
sb->s_flags |= SB_RDONLY;
ocfs2: add errors=continue OCFS2 is often used in high-availaibility systems. However, ocfs2 converts the filesystem to read-only at the drop of the hat. This may not be necessary, since turning the filesystem read-only would affect other running processes as well, decreasing availability. This attempt is to add errors=continue, which would return the EIO to the calling process and terminate furhter processing so that the filesystem is not corrupted further. However, the filesystem is not converted to read-only. As a future plan, I intend to create a small utility or extend fsck.ocfs2 to fix small errors such as in the inode. The input to the utility such as the inode can come from the kernel logs so we don't have to schedule a downtime for fixing small-enough errors. The patch changes the ocfs2_error to return an error. The error returned depends on the mount option set. If none is set, the default is to turn the filesystem read-only. Perhaps errors=continue is not the best option name. Historically it is used for making an attempt to progress in the current process itself. Should we call it errors=eio? or errors=killproc? Suggestions/Comments welcome. Sources are available at: https://github.com/goldwynr/linux/tree/error-cont Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 00:44:11 +02:00
ocfs2_set_ro_flag(osb, 0);
}
return rv;
}
ocfs2: add errors=continue OCFS2 is often used in high-availaibility systems. However, ocfs2 converts the filesystem to read-only at the drop of the hat. This may not be necessary, since turning the filesystem read-only would affect other running processes as well, decreasing availability. This attempt is to add errors=continue, which would return the EIO to the calling process and terminate furhter processing so that the filesystem is not corrupted further. However, the filesystem is not converted to read-only. As a future plan, I intend to create a small utility or extend fsck.ocfs2 to fix small errors such as in the inode. The input to the utility such as the inode can come from the kernel logs so we don't have to schedule a downtime for fixing small-enough errors. The patch changes the ocfs2_error to return an error. The error returned depends on the mount option set. If none is set, the default is to turn the filesystem read-only. Perhaps errors=continue is not the best option name. Historically it is used for making an attempt to progress in the current process itself. Should we call it errors=eio? or errors=killproc? Suggestions/Comments welcome. Sources are available at: https://github.com/goldwynr/linux/tree/error-cont Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 00:44:11 +02:00
int __ocfs2_error(struct super_block *sb, const char *function,
const char *fmt, ...)
{
struct va_format vaf;
va_list args;
va_start(args, fmt);
vaf.fmt = fmt;
vaf.va = &args;
/* Not using mlog here because we want to show the actual
* function the error came from. */
printk(KERN_CRIT "OCFS2: ERROR (device %s): %s: %pV",
sb->s_id, function, &vaf);
va_end(args);
ocfs2: add errors=continue OCFS2 is often used in high-availaibility systems. However, ocfs2 converts the filesystem to read-only at the drop of the hat. This may not be necessary, since turning the filesystem read-only would affect other running processes as well, decreasing availability. This attempt is to add errors=continue, which would return the EIO to the calling process and terminate furhter processing so that the filesystem is not corrupted further. However, the filesystem is not converted to read-only. As a future plan, I intend to create a small utility or extend fsck.ocfs2 to fix small errors such as in the inode. The input to the utility such as the inode can come from the kernel logs so we don't have to schedule a downtime for fixing small-enough errors. The patch changes the ocfs2_error to return an error. The error returned depends on the mount option set. If none is set, the default is to turn the filesystem read-only. Perhaps errors=continue is not the best option name. Historically it is used for making an attempt to progress in the current process itself. Should we call it errors=eio? or errors=killproc? Suggestions/Comments welcome. Sources are available at: https://github.com/goldwynr/linux/tree/error-cont Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 00:44:11 +02:00
return ocfs2_handle_error(sb);
}
/* Handle critical errors. This is intentionally more drastic than
* ocfs2_handle_error, so we only use for things like journal errors,
* etc. */
void __ocfs2_abort(struct super_block *sb, const char *function,
const char *fmt, ...)
{
struct va_format vaf;
va_list args;
va_start(args, fmt);
vaf.fmt = fmt;
vaf.va = &args;
printk(KERN_CRIT "OCFS2: abort (device %s): %s: %pV",
sb->s_id, function, &vaf);
va_end(args);
/* We don't have the cluster support yet to go straight to
* hard readonly in here. Until then, we want to keep
* ocfs2_abort() so that we can at least mark critical
* errors.
*
* TODO: This should abort the journal and alert other nodes
* that our slot needs recovery. */
/* Force a panic(). This stinks, but it's better than letting
* things continue without having a proper hard readonly
* here. */
if (!ocfs2_mount_local(OCFS2_SB(sb)))
OCFS2_SB(sb)->s_mount_opt |= OCFS2_MOUNT_ERRORS_PANIC;
ocfs2_handle_error(sb);
}
/*
* Void signal blockers, because in-kernel sigprocmask() only fails
* when SIG_* is wrong.
*/
void ocfs2_block_signals(sigset_t *oldset)
{
int rc;
sigset_t blocked;
sigfillset(&blocked);
rc = sigprocmask(SIG_BLOCK, &blocked, oldset);
BUG_ON(rc);
}
void ocfs2_unblock_signals(sigset_t *oldset)
{
int rc = sigprocmask(SIG_SETMASK, oldset, NULL);
BUG_ON(rc);
}
module_init(ocfs2_init);
module_exit(ocfs2_exit);