linux/arch/tile/kernel/proc.c

164 lines
3.5 KiB
C
Raw Normal View History

/*
* Copyright 2010 Tilera Corporation. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation, version 2.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for
* more details.
*/
#include <linux/smp.h>
#include <linux/seq_file.h>
#include <linux/threads.h>
#include <linux/cpumask.h>
#include <linux/timex.h>
#include <linux/delay.h>
#include <linux/fs.h>
#include <linux/proc_fs.h>
#include <linux/sysctl.h>
#include <linux/hardirq.h>
#include <linux/hugetlb.h>
#include <linux/mman.h>
#include <asm/unaligned.h>
#include <asm/pgtable.h>
#include <asm/processor.h>
#include <asm/sections.h>
#include <asm/homecache.h>
arch/tile: more /proc and /sys file support This change introduces a few of the less controversial /proc and /proc/sys interfaces for tile, along with sysfs attributes for various things that were originally proposed as /proc/tile files. It also adjusts the "hardwall" proc API. Arnd Bergmann reviewed the initial arch/tile submission, which included a complete set of all the /proc/tile and /proc/sys/tile knobs that we had added in a somewhat ad hoc way during initial development, and provided feedback on where most of them should go. One knob turned out to be similar enough to the existing /proc/sys/debug/exception-trace that it was re-implemented to use that model instead. Another knob was /proc/tile/grid, which reported the "grid" dimensions of a tile chip (e.g. 8x8 processors = 64-core chip). Arnd suggested looking at sysfs for that, so this change moves that information to a pair of sysfs attributes (chip_width and chip_height) in the /sys/devices/system/cpu directory. We also put the "chip_serial" and "chip_revision" information from our old /proc/tile/board file as attributes in /sys/devices/system/cpu. Other information collected via hypervisor APIs is now placed in /sys/hypervisor. We create a /sys/hypervisor/type file (holding the constant string "tilera") to be parallel with the Xen use of /sys/hypervisor/type holding "xen". We create three top-level files, "version" (the hypervisor's own version), "config_version" (the version of the configuration file), and "hvconfig" (the contents of the configuration file). The remaining information from our old /proc/tile/board and /proc/tile/switch files becomes an attribute group appearing under /sys/hypervisor/board/. Finally, after some feedback from Arnd Bergmann for the previous version of this patch, the /proc/tile/hardwall file is split up into two conceptual parts. First, a directory /proc/tile/hardwall/ which contains one file per active hardwall, each file named after the hardwall's ID and holding a cpulist that says which cpus are enclosed by the hardwall. Second, a /proc/PID file "hardwall" that is either empty (for non-hardwall-using processes) or contains the hardwall ID. Finally, this change pushes the /proc/sys/tile/unaligned_fixup/ directory, with knobs controlling the kernel code for handling the fixup of unaligned exceptions. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-26 18:40:09 +02:00
#include <asm/hardwall.h>
#include <arch/chip.h>
/*
* Support /proc/cpuinfo
*/
#define cpu_to_ptr(n) ((void *)((long)(n)+1))
#define ptr_to_cpu(p) ((long)(p) - 1)
static int show_cpuinfo(struct seq_file *m, void *v)
{
int n = ptr_to_cpu(v);
if (n == 0) {
char buf[NR_CPUS*5];
cpulist_scnprintf(buf, sizeof(buf), cpu_online_mask);
seq_printf(m, "cpu count\t: %d\n", num_online_cpus());
seq_printf(m, "cpu list\t: %s\n", buf);
seq_printf(m, "model name\t: %s\n", chip_model);
seq_printf(m, "flags\t\t:\n"); /* nothing for now */
seq_printf(m, "cpu MHz\t\t: %llu.%06llu\n",
get_clock_rate() / 1000000,
(get_clock_rate() % 1000000));
seq_printf(m, "bogomips\t: %lu.%02lu\n\n",
loops_per_jiffy/(500000/HZ),
(loops_per_jiffy/(5000/HZ)) % 100);
}
#ifdef CONFIG_SMP
if (!cpu_online(n))
return 0;
#endif
seq_printf(m, "processor\t: %d\n", n);
/* Print only num_online_cpus() blank lines total. */
if (cpumask_next(n, cpu_online_mask) < nr_cpu_ids)
seq_printf(m, "\n");
return 0;
}
static void *c_start(struct seq_file *m, loff_t *pos)
{
return *pos < nr_cpu_ids ? cpu_to_ptr(*pos) : NULL;
}
static void *c_next(struct seq_file *m, void *v, loff_t *pos)
{
++*pos;
return c_start(m, pos);
}
static void c_stop(struct seq_file *m, void *v)
{
}
const struct seq_operations cpuinfo_op = {
.start = c_start,
.next = c_next,
.stop = c_stop,
.show = show_cpuinfo,
};
arch/tile: more /proc and /sys file support This change introduces a few of the less controversial /proc and /proc/sys interfaces for tile, along with sysfs attributes for various things that were originally proposed as /proc/tile files. It also adjusts the "hardwall" proc API. Arnd Bergmann reviewed the initial arch/tile submission, which included a complete set of all the /proc/tile and /proc/sys/tile knobs that we had added in a somewhat ad hoc way during initial development, and provided feedback on where most of them should go. One knob turned out to be similar enough to the existing /proc/sys/debug/exception-trace that it was re-implemented to use that model instead. Another knob was /proc/tile/grid, which reported the "grid" dimensions of a tile chip (e.g. 8x8 processors = 64-core chip). Arnd suggested looking at sysfs for that, so this change moves that information to a pair of sysfs attributes (chip_width and chip_height) in the /sys/devices/system/cpu directory. We also put the "chip_serial" and "chip_revision" information from our old /proc/tile/board file as attributes in /sys/devices/system/cpu. Other information collected via hypervisor APIs is now placed in /sys/hypervisor. We create a /sys/hypervisor/type file (holding the constant string "tilera") to be parallel with the Xen use of /sys/hypervisor/type holding "xen". We create three top-level files, "version" (the hypervisor's own version), "config_version" (the version of the configuration file), and "hvconfig" (the contents of the configuration file). The remaining information from our old /proc/tile/board and /proc/tile/switch files becomes an attribute group appearing under /sys/hypervisor/board/. Finally, after some feedback from Arnd Bergmann for the previous version of this patch, the /proc/tile/hardwall file is split up into two conceptual parts. First, a directory /proc/tile/hardwall/ which contains one file per active hardwall, each file named after the hardwall's ID and holding a cpulist that says which cpus are enclosed by the hardwall. Second, a /proc/PID file "hardwall" that is either empty (for non-hardwall-using processes) or contains the hardwall ID. Finally, this change pushes the /proc/sys/tile/unaligned_fixup/ directory, with knobs controlling the kernel code for handling the fixup of unaligned exceptions. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-26 18:40:09 +02:00
/*
* Support /proc/tile directory
*/
static int __init proc_tile_init(void)
{
struct proc_dir_entry *root = proc_mkdir("tile", NULL);
if (root == NULL)
return 0;
proc_tile_hardwall_init(root);
return 0;
}
arch_initcall(proc_tile_init);
/*
* Support /proc/sys/tile directory
*/
#ifndef __tilegx__ /* FIXME: GX: no support for unaligned access yet */
static ctl_table unaligned_subtable[] = {
{
.procname = "enabled",
.data = &unaligned_fixup,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec
},
{
.procname = "printk",
.data = &unaligned_printk,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec
},
{
.procname = "count",
.data = &unaligned_fixup_count,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec
},
{}
};
static ctl_table unaligned_table[] = {
{
.procname = "unaligned_fixup",
.mode = 0555,
.child = unaligned_subtable
},
{}
};
static struct ctl_path tile_path[] = {
{ .procname = "tile" },
{ }
};
static int __init proc_sys_tile_init(void)
{
register_sysctl_paths(tile_path, unaligned_table);
return 0;
}
arch_initcall(proc_sys_tile_init);
#endif