OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
linux/arch/tile/kernel/vmlinux.lds.S

96 lines
2.0 KiB
ArmAsm
Raw Normal View History

arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 05:09:12 +02:00
#include <asm-generic/vmlinux.lds.h>
#include <asm/page.h>
#include <asm/cache.h>
#include <asm/thread_info.h>
#include <hv/hypervisor.h>
/* Text loads starting from the supervisor interrupt vector address. */
#define TEXT_OFFSET MEM_SV_INTRPT
OUTPUT_ARCH(tile)
ENTRY(_start)
jiffies = jiffies_64;
PHDRS
{
intrpt1 PT_LOAD ;
text PT_LOAD ;
data PT_LOAD ;
}
SECTIONS
{
/* Text is loaded with a different VA than data; start with text. */
#undef LOAD_OFFSET
#define LOAD_OFFSET TEXT_OFFSET
/* Interrupt vectors */
.intrpt1 (LOAD_OFFSET) : AT ( 0 ) /* put at the start of physical memory */
{
_text = .;
_stext = .;
*(.intrpt1)
} :intrpt1 =0
/* Hypervisor call vectors */
#include "hvglue.lds"
/* Now the real code */
. = ALIGN(0x20000);
.text : AT (ADDR(.text) - LOAD_OFFSET) {
arch/tile: Miscellaneous cleanup changes. This commit is primarily changes caused by reviewing "sparse" and "checkpatch" output on our sources, so is somewhat noisy, since things like "printk() -> pr_err()" (or whatever) throughout the codebase tend to get tedious to read. Rather than trying to tease apart precisely which things changed due to which type of code review, this commit includes various cleanups in the code: - sparse: Add declarations in headers for globals. - sparse: Fix __user annotations. - sparse: Using gfp_t consistently instead of int. - sparse: removing functions not actually used. - checkpatch: Clean up printk() warnings by using pr_info(), etc.; also avoid partial-line printks except in bootup code. - checkpatch: Use exposed structs rather than typedefs. - checkpatch: Change some C99 comments to C89 comments. In addition, a couple of minor other changes are rolled in to this commit: - Add support for a "raise" instruction to cause SIGFPE, etc., to be raised. - Remove some compat code that is unnecessary when we fully eliminate some of the deprecated syscalls from the generic syscall ABI. - Update the tile_defconfig to reflect current config contents. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-25 23:04:17 +02:00
HEAD_TEXT
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 05:09:12 +02:00
SCHED_TEXT
LOCK_TEXT
__fix_text_end = .; /* tile-cpack won't rearrange before this */
TEXT_TEXT
*(.text.*)
*(.coldtext*)
*(.fixup)
*(.gnu.warning)
arch/tile: Miscellaneous cleanup changes. This commit is primarily changes caused by reviewing "sparse" and "checkpatch" output on our sources, so is somewhat noisy, since things like "printk() -> pr_err()" (or whatever) throughout the codebase tend to get tedious to read. Rather than trying to tease apart precisely which things changed due to which type of code review, this commit includes various cleanups in the code: - sparse: Add declarations in headers for globals. - sparse: Fix __user annotations. - sparse: Using gfp_t consistently instead of int. - sparse: removing functions not actually used. - checkpatch: Clean up printk() warnings by using pr_info(), etc.; also avoid partial-line printks except in bootup code. - checkpatch: Use exposed structs rather than typedefs. - checkpatch: Change some C99 comments to C89 comments. In addition, a couple of minor other changes are rolled in to this commit: - Add support for a "raise" instruction to cause SIGFPE, etc., to be raised. - Remove some compat code that is unnecessary when we fully eliminate some of the deprecated syscalls from the generic syscall ABI. - Update the tile_defconfig to reflect current config contents. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-25 23:04:17 +02:00
} :text =0
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 05:09:12 +02:00
_etext = .;
/* "Init" is divided into two areas with very different virtual addresses. */
INIT_TEXT_SECTION(PAGE_SIZE)
/* Now we skip back to PAGE_OFFSET for the data. */
. = (. - TEXT_OFFSET + PAGE_OFFSET);
#undef LOAD_OFFSET
#define LOAD_OFFSET PAGE_OFFSET
. = ALIGN(PAGE_SIZE);
VMLINUX_SYMBOL(_sinitdata) = .;
arch/tile: catch up with section naming convention in 2.6.35 The convention changed to, e.g., ".data..page_aligned". This commit fixes the places in the tile architecture that were still using the old convention. One tile-specific section (.init.page) was dropped in favor of just using an "aligned" attribute. Sam Ravnborg <sam@ravnborg.org> pointed out __PAGE_ALIGNED_BSS, etc. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-02-28 00:52:24 +01:00
INIT_DATA_SECTION(16) :data =0
percpu: Always align percpu output section to PAGE_SIZE Percpu allocator honors alignment request upto PAGE_SIZE and both the percpu addresses in the percpu address space and the translated kernel addresses should be aligned accordingly. The calculation of the former depends on the alignment of percpu output section in the kernel image. The linker script macros PERCPU_VADDR() and PERCPU() are used to define this output section and the latter takes @align parameter. Several architectures are using @align smaller than PAGE_SIZE breaking percpu memory alignment. This patch removes @align parameter from PERCPU(), renames it to PERCPU_SECTION() and makes it always align to PAGE_SIZE. While at it, add PCPU_SETUP_BUG_ON() checks such that alignment problems are reliably detected and remove percpu alignment comment recently added in workqueue.c as the condition would trigger BUG way before reaching there. For um, this patch raises the alignment of percpu area. As the area is in .init, there shouldn't be any noticeable difference. This problem was discovered by David Howells while debugging boot failure on mn10300. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Mike Frysinger <vapier@gentoo.org> Cc: uclinux-dist-devel@blackfin.uclinux.org Cc: David Howells <dhowells@redhat.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: user-mode-linux-devel@lists.sourceforge.net
2011-03-24 18:50:09 +01:00
PERCPU_SECTION(L2_CACHE_BYTES)
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 05:09:12 +02:00
. = ALIGN(PAGE_SIZE);
VMLINUX_SYMBOL(_einitdata) = .;
_sdata = .; /* Start of data section */
RO_DATA_SECTION(PAGE_SIZE)
/* initially writeable, then read-only */
. = ALIGN(PAGE_SIZE);
__w1data_begin = .;
.w1data : AT(ADDR(.w1data) - LOAD_OFFSET) {
VMLINUX_SYMBOL(__w1data_begin) = .;
*(.w1data)
VMLINUX_SYMBOL(__w1data_end) = .;
}
RW_DATA_SECTION(L2_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
_edata = .;
EXCEPTION_TABLE(L2_CACHE_BYTES)
NOTES
BSS_SECTION(8, PAGE_SIZE, 1)
_end = . ;
STABS_DEBUG
DWARF_DEBUG
DISCARDS
}