OpenE2K/linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
adcf7d5e76
linux/sound/soc/sh/rcar/rsnd.h

298 lines
7.8 KiB
C
Raw Normal View History

ASoC: add Renesas R-Car core feature Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuits are different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2). (Actually, there are many difference in Generation1 chips) Basically, for the future, Renesas R-Car series will use Gen2 style sound circuit, but driver should care Gen1 also. The main differences between Gen1 and Gen2 peripheral are 1) register offset, 2) data path. This patch adds basic (core) feature for R-Car series sound driver as prototype Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-22 06:35:52 +02:00
/*
* Renesas R-Car
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef RSND_H
#define RSND_H
#include <linux/clk.h>
#include <linux/device.h>
ASoC: rsnd: add common DMAEngine method R-Car Sound driver will support DMA transfer in the future, then, SSI/SRU/SRC will use it. Current R-Car can't use soc-dmaengine-pcm.c since its DMAEngine doesn't support dmaengine_prep_dma_cyclic(), and SSI needs double plane transfer (which needs special submit) on DMAC. This patch adds common DMAEngine method for it Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 03:58:50 +02:00
#include <linux/dma-mapping.h>
ASoC: add Renesas R-Car core feature Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuits are different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2). (Actually, there are many difference in Generation1 chips) Basically, for the future, Renesas R-Car series will use Gen2 style sound circuit, but driver should care Gen1 also. The main differences between Gen1 and Gen2 peripheral are 1) register offset, 2) data path. This patch adds basic (core) feature for R-Car series sound driver as prototype Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-22 06:35:52 +02:00
#include <linux/io.h>
#include <linux/list.h>
#include <linux/module.h>
ASoC: rsnd: add common DMAEngine method R-Car Sound driver will support DMA transfer in the future, then, SSI/SRU/SRC will use it. Current R-Car can't use soc-dmaengine-pcm.c since its DMAEngine doesn't support dmaengine_prep_dma_cyclic(), and SSI needs double plane transfer (which needs special submit) on DMAC. This patch adds common DMAEngine method for it Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 03:58:50 +02:00
#include <linux/sh_dma.h>
#include <linux/workqueue.h>
ASoC: add Renesas R-Car core feature Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuits are different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2). (Actually, there are many difference in Generation1 chips) Basically, for the future, Renesas R-Car series will use Gen2 style sound circuit, but driver should care Gen1 also. The main differences between Gen1 and Gen2 peripheral are 1) register offset, 2) data path. This patch adds basic (core) feature for R-Car series sound driver as prototype Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-22 06:35:52 +02:00
#include <sound/rcar_snd.h>
#include <sound/soc.h>
#include <sound/pcm_params.h>
/*
* pseudo register
*
* The register address offsets SRU/SCU/SSIU on Gen1/Gen2 are very different.
* This driver uses pseudo register in order to hide it.
* see gen1/gen2 for detail
*/
ASoC: add Renesas R-Car Generation feature Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuit is different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2) (Actually, there are many difference in Generation1 chips) The main difference between Gen1 and Gen2 are 1) register offset, 2) data path In order to control Gen1/Gen2 by same method, this patch adds gen.c. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-22 06:36:21 +02:00
enum rsnd_reg {
ASoC: rcar: add Gen2 sound support This patch adds Gen2 sound support for Renesas R-Car. But, it is supporting PIO transfer only at this point Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-29 03:43:45 +01:00
/* SRU/SCU/SSIU */
ASoC: rsnd: route setting is needed only Gen1 Renesas sound has SRC (= Sampling Rate Converter), but, the HW implementation depends on its generation. It was part of SRU on Gen1, and SCU on Gen2. This SCU needs DMA transfer to use it. Current rsnd driver is using it as DMA transfer buffer (= no rate convert), and Gen1 is only supported at this point. This patch cleanup it with focusing about SRC and Gen2 part. rsnd_scu_set_route() is needed only Gen1. This patch renames it to rsnd_scu_set_route_if_gen1() and it adds comment to rsnd_reg member in order to clarify it is used for Gen1. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-20 04:27:37 +01:00
RSND_REG_SRC_ROUTE_SEL, /* for Gen1 */
RSND_REG_SRC_TMG_SEL0, /* for Gen1 */
RSND_REG_SRC_TMG_SEL1, /* for Gen1 */
RSND_REG_SRC_TMG_SEL2, /* for Gen1 */
RSND_REG_SRC_ROUTE_CTRL, /* for Gen1 */
ASoC: add Renesas R-Car SCU feature Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuit is different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2) (Actually, there are many difference in Generation1 chips) This patch adds SCU feature on this driver. But, it defines SCU style only, does nothing at this point. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-22 06:36:35 +02:00
RSND_REG_SSI_MODE0,
RSND_REG_SSI_MODE1,
ASoC: rsnd: SSI supports DMA transfer via BUSIF This patch adds BUSIF support for R-Car sound DMAEngine transfer. The sound data will be transferred via FIFO which can cover blank time which will happen when DMA channel is switching. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 03:59:12 +02:00
RSND_REG_BUSIF_MODE,
ASoC: rsnd: INT_ENABLE is needed only Gen2 INT_ENABLE is needed only Gen2. rsnd_mod_write() do nothing on Gen1, but it is confusable. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-20 04:28:19 +01:00
RSND_REG_INT_ENABLE, /* for Gen2 */
ASoC: rsnd: tidyup register naming Use correct register name which appears in the datasheet Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-20 04:27:03 +01:00
RSND_REG_SRC_ADINR,
ASoC: add Renesas R-Car SCU feature Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuit is different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2) (Actually, there are many difference in Generation1 chips) This patch adds SCU feature on this driver. But, it defines SCU style only, does nothing at this point. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-22 06:36:35 +02:00
ASoC: add Renesas R-Car ADG feature Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuit is different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2) (Actually, there are many difference in Generation1 chips) This patch adds ADG feature which controls sound clock Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-22 06:36:46 +02:00
/* ADG */
RSND_REG_BRRA,
RSND_REG_BRRB,
RSND_REG_SSICKR,
RSND_REG_AUDIO_CLK_SEL0,
RSND_REG_AUDIO_CLK_SEL1,
RSND_REG_AUDIO_CLK_SEL2,
ASoC: add Renesas R-Car SSI feature Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuit is different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2) (Actually, there are many difference in Generation1 chips) As 1st protype, this patch adds SSI feature on this driver. But, it is PIO sound playback support only at this point. The DMA transfer, and capture feature will be supported in the future Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-22 06:36:57 +02:00
/* SSI */
RSND_REG_SSICR,
RSND_REG_SSISR,
RSND_REG_SSITDR,
RSND_REG_SSIRDR,
RSND_REG_SSIWSR,
ASoC: add Renesas R-Car Generation feature Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuit is different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2) (Actually, there are many difference in Generation1 chips) The main difference between Gen1 and Gen2 are 1) register offset, 2) data path In order to control Gen1/Gen2 by same method, this patch adds gen.c. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-22 06:36:21 +02:00
RSND_REG_MAX,
};
ASoC: add Renesas R-Car core feature Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuits are different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2). (Actually, there are many difference in Generation1 chips) Basically, for the future, Renesas R-Car series will use Gen2 style sound circuit, but driver should care Gen1 also. The main differences between Gen1 and Gen2 peripheral are 1) register offset, 2) data path. This patch adds basic (core) feature for R-Car series sound driver as prototype Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-22 06:35:52 +02:00
struct rsnd_priv;
ASoC: add Renesas R-Car module feature Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuit is different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2) (Actually, there are many difference in Generation1 chips) Gen1 series consists of SRU/SSI/ADG, and Gen2 series consists of SCU/SSIU/SSI/ADG. In order to control these by same method, these are treated as "mod" on this driver. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-22 06:36:03 +02:00
struct rsnd_mod;
ASoC: add Renesas R-Car core feature Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuits are different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2). (Actually, there are many difference in Generation1 chips) Basically, for the future, Renesas R-Car series will use Gen2 style sound circuit, but driver should care Gen1 also. The main differences between Gen1 and Gen2 peripheral are 1) register offset, 2) data path. This patch adds basic (core) feature for R-Car series sound driver as prototype Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-22 06:35:52 +02:00
struct rsnd_dai;
struct rsnd_dai_stream;
ASoC: add Renesas R-Car Generation feature Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuit is different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2) (Actually, there are many difference in Generation1 chips) The main difference between Gen1 and Gen2 are 1) register offset, 2) data path In order to control Gen1/Gen2 by same method, this patch adds gen.c. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-22 06:36:21 +02:00
/*
* R-Car basic functions
*/
#define rsnd_mod_read(m, r) \
rsnd_read(rsnd_mod_to_priv(m), m, RSND_REG_##r)
#define rsnd_mod_write(m, r, d) \
rsnd_write(rsnd_mod_to_priv(m), m, RSND_REG_##r, d)
#define rsnd_mod_bset(m, r, s, d) \
rsnd_bset(rsnd_mod_to_priv(m), m, RSND_REG_##r, s, d)
u32 rsnd_read(struct rsnd_priv *priv, struct rsnd_mod *mod, enum rsnd_reg reg);
void rsnd_write(struct rsnd_priv *priv, struct rsnd_mod *mod,
enum rsnd_reg reg, u32 data);
void rsnd_bset(struct rsnd_priv *priv, struct rsnd_mod *mod, enum rsnd_reg reg,
u32 mask, u32 data);
ASoC: rsnd: add common DMAEngine method R-Car Sound driver will support DMA transfer in the future, then, SSI/SRU/SRC will use it. Current R-Car can't use soc-dmaengine-pcm.c since its DMAEngine doesn't support dmaengine_prep_dma_cyclic(), and SSI needs double plane transfer (which needs special submit) on DMAC. This patch adds common DMAEngine method for it Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 03:58:50 +02:00
/*
* R-Car DMA
*/
struct rsnd_dma {
struct rsnd_priv *priv;
struct sh_dmae_slave slave;
struct work_struct work;
struct dma_chan *chan;
enum dma_data_direction dir;
int (*inquiry)(struct rsnd_dma *dma, dma_addr_t *buf, int *len);
int (*complete)(struct rsnd_dma *dma);
int submit_loop;
};
void rsnd_dma_start(struct rsnd_dma *dma);
void rsnd_dma_stop(struct rsnd_dma *dma);
int rsnd_dma_available(struct rsnd_dma *dma);
int rsnd_dma_init(struct rsnd_priv *priv, struct rsnd_dma *dma,
int is_play, int id,
int (*inquiry)(struct rsnd_dma *dma, dma_addr_t *buf, int *len),
int (*complete)(struct rsnd_dma *dma));
void rsnd_dma_quit(struct rsnd_priv *priv,
struct rsnd_dma *dma);
ASoC: add Renesas R-Car module feature Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuit is different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2) (Actually, there are many difference in Generation1 chips) Gen1 series consists of SRU/SSI/ADG, and Gen2 series consists of SCU/SSIU/SSI/ADG. In order to control these by same method, these are treated as "mod" on this driver. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-22 06:36:03 +02:00
/*
* R-Car sound mod
*/
struct rsnd_mod_ops {
char *name;
int (*init)(struct rsnd_mod *mod,
struct rsnd_dai *rdai,
struct rsnd_dai_stream *io);
int (*quit)(struct rsnd_mod *mod,
struct rsnd_dai *rdai,
struct rsnd_dai_stream *io);
int (*start)(struct rsnd_mod *mod,
struct rsnd_dai *rdai,
struct rsnd_dai_stream *io);
int (*stop)(struct rsnd_mod *mod,
struct rsnd_dai *rdai,
struct rsnd_dai_stream *io);
};
struct rsnd_mod {
int id;
struct rsnd_priv *priv;
struct rsnd_mod_ops *ops;
struct list_head list; /* connect to rsnd_dai playback/capture */
ASoC: rsnd: add common DMAEngine method R-Car Sound driver will support DMA transfer in the future, then, SSI/SRU/SRC will use it. Current R-Car can't use soc-dmaengine-pcm.c since its DMAEngine doesn't support dmaengine_prep_dma_cyclic(), and SSI needs double plane transfer (which needs special submit) on DMAC. This patch adds common DMAEngine method for it Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 03:58:50 +02:00
struct rsnd_dma dma;
ASoC: add Renesas R-Car module feature Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuit is different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2) (Actually, there are many difference in Generation1 chips) Gen1 series consists of SRU/SSI/ADG, and Gen2 series consists of SCU/SSIU/SSI/ADG. In order to control these by same method, these are treated as "mod" on this driver. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-22 06:36:03 +02:00
};
#define rsnd_mod_to_priv(mod) ((mod)->priv)
ASoC: rsnd: add common DMAEngine method R-Car Sound driver will support DMA transfer in the future, then, SSI/SRU/SRC will use it. Current R-Car can't use soc-dmaengine-pcm.c since its DMAEngine doesn't support dmaengine_prep_dma_cyclic(), and SSI needs double plane transfer (which needs special submit) on DMAC. This patch adds common DMAEngine method for it Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 03:58:50 +02:00
#define rsnd_mod_to_dma(mod) (&(mod)->dma)
#define rsnd_dma_to_mod(_dma) container_of((_dma), struct rsnd_mod, dma)
ASoC: add Renesas R-Car module feature Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuit is different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2) (Actually, there are many difference in Generation1 chips) Gen1 series consists of SRU/SSI/ADG, and Gen2 series consists of SCU/SSIU/SSI/ADG. In order to control these by same method, these are treated as "mod" on this driver. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-22 06:36:03 +02:00
#define rsnd_mod_id(mod) ((mod)->id)
#define for_each_rsnd_mod(pos, n, io) \
list_for_each_entry_safe(pos, n, &(io)->head, list)
#define rsnd_mod_call(mod, func, rdai, io) \
(!(mod) ? -ENODEV : \
!((mod)->ops->func) ? 0 : \
(mod)->ops->func(mod, rdai, io))
void rsnd_mod_init(struct rsnd_priv *priv,
struct rsnd_mod *mod,
struct rsnd_mod_ops *ops,
int id);
char *rsnd_mod_name(struct rsnd_mod *mod);
ASoC: add Renesas R-Car core feature Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuits are different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2). (Actually, there are many difference in Generation1 chips) Basically, for the future, Renesas R-Car series will use Gen2 style sound circuit, but driver should care Gen1 also. The main differences between Gen1 and Gen2 peripheral are 1) register offset, 2) data path. This patch adds basic (core) feature for R-Car series sound driver as prototype Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-22 06:35:52 +02:00
/*
* R-Car sound DAI
*/
#define RSND_DAI_NAME_SIZE 16
struct rsnd_dai_stream {
struct list_head head; /* head of rsnd_mod list */
struct snd_pcm_substream *substream;
int byte_pos;
int period_pos;
int byte_per_period;
int next_period_byte;
};
struct rsnd_dai {
char name[RSND_DAI_NAME_SIZE];
struct rsnd_dai_platform_info *info; /* rcar_snd.h */
struct rsnd_dai_stream playback;
struct rsnd_dai_stream capture;
ASoC: rcar: some dubious one-bit signed bitfields Because these are signed they can either be 0 or -1 instead of 0 and 1 as intended. It doesn't cause a problem from what I can see, but it's dangerous and Sparse complains: sound/soc/sh/rcar/rsnd.h:177:25: error: dubious one-bit signed bitfield Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-08 10:46:53 +01:00
unsigned int clk_master:1;
unsigned int bit_clk_inv:1;
unsigned int frm_clk_inv:1;
unsigned int sys_delay:1;
unsigned int data_alignment:1;
ASoC: add Renesas R-Car core feature Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuits are different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2). (Actually, there are many difference in Generation1 chips) Basically, for the future, Renesas R-Car series will use Gen2 style sound circuit, but driver should care Gen1 also. The main differences between Gen1 and Gen2 peripheral are 1) register offset, 2) data path. This patch adds basic (core) feature for R-Car series sound driver as prototype Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-22 06:35:52 +02:00
};
#define rsnd_dai_nr(priv) ((priv)->dai_nr)
#define for_each_rsnd_dai(rdai, priv, i) \
for (i = 0, (rdai) = rsnd_dai_get(priv, i); \
i < rsnd_dai_nr(priv); \
i++, (rdai) = rsnd_dai_get(priv, i))
struct rsnd_dai *rsnd_dai_get(struct rsnd_priv *priv, int id);
ASoC: add Renesas R-Car module feature Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuit is different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2) (Actually, there are many difference in Generation1 chips) Gen1 series consists of SRU/SSI/ADG, and Gen2 series consists of SCU/SSIU/SSI/ADG. In order to control these by same method, these are treated as "mod" on this driver. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-22 06:36:03 +02:00
int rsnd_dai_disconnect(struct rsnd_mod *mod);
int rsnd_dai_connect(struct rsnd_dai *rdai, struct rsnd_mod *mod,
struct rsnd_dai_stream *io);
ASoC: add Renesas R-Car core feature Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuits are different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2). (Actually, there are many difference in Generation1 chips) Basically, for the future, Renesas R-Car series will use Gen2 style sound circuit, but driver should care Gen1 also. The main differences between Gen1 and Gen2 peripheral are 1) register offset, 2) data path. This patch adds basic (core) feature for R-Car series sound driver as prototype Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-22 06:35:52 +02:00
int rsnd_dai_is_play(struct rsnd_dai *rdai, struct rsnd_dai_stream *io);
ASoC: rsnd: remove platform dai and add dai_id on platform setting Current rsnd driver is using struct rsnd_dai_platform_info so that indicate sound DAI information (playback/capture SSI ID). But, SSI settings were also required separately. Thus, platform settings was very un-understandable. This patch adds dai_id to SSI settings, and removed rsnd_dai_platform_info. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 03:58:29 +02:00
int rsnd_dai_id(struct rsnd_priv *priv, struct rsnd_dai *rdai);
ASoC: add Renesas R-Car core feature Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuits are different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2). (Actually, there are many difference in Generation1 chips) Basically, for the future, Renesas R-Car series will use Gen2 style sound circuit, but driver should care Gen1 also. The main differences between Gen1 and Gen2 peripheral are 1) register offset, 2) data path. This patch adds basic (core) feature for R-Car series sound driver as prototype Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-22 06:35:52 +02:00
#define rsnd_dai_get_platform_info(rdai) ((rdai)->info)
ASoC: add Renesas R-Car SSI feature Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuit is different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2) (Actually, there are many difference in Generation1 chips) As 1st protype, this patch adds SSI feature on this driver. But, it is PIO sound playback support only at this point. The DMA transfer, and capture feature will be supported in the future Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-22 06:36:57 +02:00
#define rsnd_io_to_runtime(io) ((io)->substream->runtime)
ASoC: add Renesas R-Car core feature Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuits are different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2). (Actually, there are many difference in Generation1 chips) Basically, for the future, Renesas R-Car series will use Gen2 style sound circuit, but driver should care Gen1 also. The main differences between Gen1 and Gen2 peripheral are 1) register offset, 2) data path. This patch adds basic (core) feature for R-Car series sound driver as prototype Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-22 06:35:52 +02:00
void rsnd_dai_pointer_update(struct rsnd_dai_stream *io, int cnt);
int rsnd_dai_pointer_offset(struct rsnd_dai_stream *io, int additional);
ASoC: add Renesas R-Car Generation feature Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuit is different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2) (Actually, there are many difference in Generation1 chips) The main difference between Gen1 and Gen2 are 1) register offset, 2) data path In order to control Gen1/Gen2 by same method, this patch adds gen.c. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-22 06:36:21 +02:00
/*
* R-Car Gen1/Gen2
*/
int rsnd_gen_probe(struct platform_device *pdev,
struct rcar_snd_info *info,
struct rsnd_priv *priv);
void rsnd_gen_remove(struct platform_device *pdev,
struct rsnd_priv *priv);
int rsnd_gen_path_init(struct rsnd_priv *priv,
struct rsnd_dai *rdai,
struct rsnd_dai_stream *io);
int rsnd_gen_path_exit(struct rsnd_priv *priv,
struct rsnd_dai *rdai,
struct rsnd_dai_stream *io);
void __iomem *rsnd_gen_reg_get(struct rsnd_priv *priv,
struct rsnd_mod *mod,
enum rsnd_reg reg);
ASoC: rcar: fixup generation checker Current rcar is using rsnd_is_gen1/gen2() to checking its IP generation, but it needs data mask. This patch fixes it up. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-11 09:07:01 +02:00
#define rsnd_is_gen1(s) (((s)->info->flags & RSND_GEN_MASK) == RSND_GEN1)
#define rsnd_is_gen2(s) (((s)->info->flags & RSND_GEN_MASK) == RSND_GEN2)
ASoC: add Renesas R-Car Generation feature Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuit is different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2) (Actually, there are many difference in Generation1 chips) The main difference between Gen1 and Gen2 are 1) register offset, 2) data path In order to control Gen1/Gen2 by same method, this patch adds gen.c. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-22 06:36:21 +02:00
ASoC: add Renesas R-Car ADG feature Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuit is different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2) (Actually, there are many difference in Generation1 chips) This patch adds ADG feature which controls sound clock Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-22 06:36:46 +02:00
/*
* R-Car ADG
*/
int rsnd_adg_ssi_clk_stop(struct rsnd_mod *mod);
int rsnd_adg_ssi_clk_try_start(struct rsnd_mod *mod, unsigned int rate);
int rsnd_adg_probe(struct platform_device *pdev,
struct rcar_snd_info *info,
struct rsnd_priv *priv);
void rsnd_adg_remove(struct platform_device *pdev,
struct rsnd_priv *priv);
ASoC: add Renesas R-Car core feature Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuits are different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2). (Actually, there are many difference in Generation1 chips) Basically, for the future, Renesas R-Car series will use Gen2 style sound circuit, but driver should care Gen1 also. The main differences between Gen1 and Gen2 peripheral are 1) register offset, 2) data path. This patch adds basic (core) feature for R-Car series sound driver as prototype Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-22 06:35:52 +02:00
/*
* R-Car sound priv
*/
struct rsnd_priv {
struct device *dev;
struct rcar_snd_info *info;
spinlock_t lock;
ASoC: add Renesas R-Car Generation feature Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuit is different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2) (Actually, there are many difference in Generation1 chips) The main difference between Gen1 and Gen2 are 1) register offset, 2) data path In order to control Gen1/Gen2 by same method, this patch adds gen.c. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-22 06:36:21 +02:00
/*
* below value will be filled on rsnd_gen_probe()
*/
void *gen;
ASoC: add Renesas R-Car SCU feature Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuit is different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2) (Actually, there are many difference in Generation1 chips) This patch adds SCU feature on this driver. But, it defines SCU style only, does nothing at this point. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-22 06:36:35 +02:00
/*
* below value will be filled on rsnd_scu_probe()
*/
void *scu;
int scu_nr;
ASoC: add Renesas R-Car ADG feature Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuit is different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2) (Actually, there are many difference in Generation1 chips) This patch adds ADG feature which controls sound clock Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-22 06:36:46 +02:00
/*
* below value will be filled on rsnd_adg_probe()
*/
void *adg;
ASoC: add Renesas R-Car SSI feature Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuit is different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2) (Actually, there are many difference in Generation1 chips) As 1st protype, this patch adds SSI feature on this driver. But, it is PIO sound playback support only at this point. The DMA transfer, and capture feature will be supported in the future Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-22 06:36:57 +02:00
/*
* below value will be filled on rsnd_ssi_probe()
*/
void *ssiu;
ASoC: add Renesas R-Car core feature Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuits are different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2). (Actually, there are many difference in Generation1 chips) Basically, for the future, Renesas R-Car series will use Gen2 style sound circuit, but driver should care Gen1 also. The main differences between Gen1 and Gen2 peripheral are 1) register offset, 2) data path. This patch adds basic (core) feature for R-Car series sound driver as prototype Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-22 06:35:52 +02:00
/*
* below value will be filled on rsnd_dai_probe()
*/
struct snd_soc_dai_driver *daidrv;
struct rsnd_dai *rdai;
int dai_nr;
};
#define rsnd_priv_to_dev(priv) ((priv)->dev)
#define rsnd_lock(priv, flags) spin_lock_irqsave(&priv->lock, flags)
#define rsnd_unlock(priv, flags) spin_unlock_irqrestore(&priv->lock, flags)
ASoC: add Renesas R-Car SCU feature Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuit is different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2) (Actually, there are many difference in Generation1 chips) This patch adds SCU feature on this driver. But, it defines SCU style only, does nothing at this point. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-22 06:36:35 +02:00
/*
* R-Car SCU
*/
int rsnd_scu_probe(struct platform_device *pdev,
struct rcar_snd_info *info,
struct rsnd_priv *priv);
void rsnd_scu_remove(struct platform_device *pdev,
struct rsnd_priv *priv);
struct rsnd_mod *rsnd_scu_mod_get(struct rsnd_priv *priv, int id);
ASoC: rcar: add rsnd_scu_hpbif_is_enable() Current SSI needs RSND_SSI_DEPENDENT flag to decide dependent/independent mode. And SCU needs RSND_SCU_USE_HPBIF flag to decide HPBIF is enable/disable. But these 2 means same things. This patch adds new rsnd_scu_hpbif_is_enable() function, and merges above methods. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-18 07:50:59 +02:00
bool rsnd_scu_hpbif_is_enable(struct rsnd_mod *mod);
ASoC: add Renesas R-Car SCU feature Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuit is different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2) (Actually, there are many difference in Generation1 chips) This patch adds SCU feature on this driver. But, it defines SCU style only, does nothing at this point. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-22 06:36:35 +02:00
#define rsnd_scu_nr(priv) ((priv)->scu_nr)
ASoC: add Renesas R-Car SSI feature Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuit is different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2) (Actually, there are many difference in Generation1 chips) As 1st protype, this patch adds SSI feature on this driver. But, it is PIO sound playback support only at this point. The DMA transfer, and capture feature will be supported in the future Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-22 06:36:57 +02:00
/*
* R-Car SSI
*/
int rsnd_ssi_probe(struct platform_device *pdev,
struct rcar_snd_info *info,
struct rsnd_priv *priv);
void rsnd_ssi_remove(struct platform_device *pdev,
struct rsnd_priv *priv);
struct rsnd_mod *rsnd_ssi_mod_get(struct rsnd_priv *priv, int id);
ASoC: rsnd: remove platform dai and add dai_id on platform setting Current rsnd driver is using struct rsnd_dai_platform_info so that indicate sound DAI information (playback/capture SSI ID). But, SSI settings were also required separately. Thus, platform settings was very un-understandable. This patch adds dai_id to SSI settings, and removed rsnd_dai_platform_info. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 03:58:29 +02:00
struct rsnd_mod *rsnd_ssi_mod_get_frm_dai(struct rsnd_priv *priv,
int dai_id, int is_play);
ASoC: add Renesas R-Car SSI feature Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuit is different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2) (Actually, there are many difference in Generation1 chips) As 1st protype, this patch adds SSI feature on this driver. But, it is PIO sound playback support only at this point. The DMA transfer, and capture feature will be supported in the future Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-22 06:36:57 +02:00
ASoC: add Renesas R-Car core feature Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuits are different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2). (Actually, there are many difference in Generation1 chips) Basically, for the future, Renesas R-Car series will use Gen2 style sound circuit, but driver should care Gen1 also. The main differences between Gen1 and Gen2 peripheral are 1) register offset, 2) data path. This patch adds basic (core) feature for R-Car series sound driver as prototype Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-22 06:35:52 +02:00
#endif
Reference in New Issue Copy Permalink