linux/drivers/phy/phy-spear1310-miphy.c

262 lines
7.6 KiB
C
Raw Normal View History

/*
* ST SPEAr1310-miphy driver
*
* Copyright (C) 2014 ST Microelectronics
* Pratyush Anand <pratyush.anand@gmail.com>
* Mohit Kumar <mohit.kumar.dhaka@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/kernel.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/phy/phy.h>
#include <linux/regmap.h>
/* SPEAr1310 Registers */
#define SPEAR1310_PCIE_SATA_CFG 0x3A4
#define SPEAR1310_PCIE_SATA2_SEL_PCIE (0 << 31)
#define SPEAR1310_PCIE_SATA1_SEL_PCIE (0 << 30)
#define SPEAR1310_PCIE_SATA0_SEL_PCIE (0 << 29)
#define SPEAR1310_PCIE_SATA2_SEL_SATA BIT(31)
#define SPEAR1310_PCIE_SATA1_SEL_SATA BIT(30)
#define SPEAR1310_PCIE_SATA0_SEL_SATA BIT(29)
#define SPEAR1310_SATA2_CFG_TX_CLK_EN BIT(27)
#define SPEAR1310_SATA2_CFG_RX_CLK_EN BIT(26)
#define SPEAR1310_SATA2_CFG_POWERUP_RESET BIT(25)
#define SPEAR1310_SATA2_CFG_PM_CLK_EN BIT(24)
#define SPEAR1310_SATA1_CFG_TX_CLK_EN BIT(23)
#define SPEAR1310_SATA1_CFG_RX_CLK_EN BIT(22)
#define SPEAR1310_SATA1_CFG_POWERUP_RESET BIT(21)
#define SPEAR1310_SATA1_CFG_PM_CLK_EN BIT(20)
#define SPEAR1310_SATA0_CFG_TX_CLK_EN BIT(19)
#define SPEAR1310_SATA0_CFG_RX_CLK_EN BIT(18)
#define SPEAR1310_SATA0_CFG_POWERUP_RESET BIT(17)
#define SPEAR1310_SATA0_CFG_PM_CLK_EN BIT(16)
#define SPEAR1310_PCIE2_CFG_DEVICE_PRESENT BIT(11)
#define SPEAR1310_PCIE2_CFG_POWERUP_RESET BIT(10)
#define SPEAR1310_PCIE2_CFG_CORE_CLK_EN BIT(9)
#define SPEAR1310_PCIE2_CFG_AUX_CLK_EN BIT(8)
#define SPEAR1310_PCIE1_CFG_DEVICE_PRESENT BIT(7)
#define SPEAR1310_PCIE1_CFG_POWERUP_RESET BIT(6)
#define SPEAR1310_PCIE1_CFG_CORE_CLK_EN BIT(5)
#define SPEAR1310_PCIE1_CFG_AUX_CLK_EN BIT(4)
#define SPEAR1310_PCIE0_CFG_DEVICE_PRESENT BIT(3)
#define SPEAR1310_PCIE0_CFG_POWERUP_RESET BIT(2)
#define SPEAR1310_PCIE0_CFG_CORE_CLK_EN BIT(1)
#define SPEAR1310_PCIE0_CFG_AUX_CLK_EN BIT(0)
#define SPEAR1310_PCIE_CFG_MASK(x) ((0xF << (x * 4)) | BIT((x + 29)))
#define SPEAR1310_SATA_CFG_MASK(x) ((0xF << (x * 4 + 16)) | \
BIT((x + 29)))
#define SPEAR1310_PCIE_CFG_VAL(x) \
(SPEAR1310_PCIE_SATA##x##_SEL_PCIE | \
SPEAR1310_PCIE##x##_CFG_AUX_CLK_EN | \
SPEAR1310_PCIE##x##_CFG_CORE_CLK_EN | \
SPEAR1310_PCIE##x##_CFG_POWERUP_RESET | \
SPEAR1310_PCIE##x##_CFG_DEVICE_PRESENT)
#define SPEAR1310_SATA_CFG_VAL(x) \
(SPEAR1310_PCIE_SATA##x##_SEL_SATA | \
SPEAR1310_SATA##x##_CFG_PM_CLK_EN | \
SPEAR1310_SATA##x##_CFG_POWERUP_RESET | \
SPEAR1310_SATA##x##_CFG_RX_CLK_EN | \
SPEAR1310_SATA##x##_CFG_TX_CLK_EN)
#define SPEAR1310_PCIE_MIPHY_CFG_1 0x3A8
#define SPEAR1310_MIPHY_DUAL_OSC_BYPASS_EXT BIT(31)
#define SPEAR1310_MIPHY_DUAL_CLK_REF_DIV2 BIT(28)
#define SPEAR1310_MIPHY_DUAL_PLL_RATIO_TOP(x) (x << 16)
#define SPEAR1310_MIPHY_SINGLE_OSC_BYPASS_EXT BIT(15)
#define SPEAR1310_MIPHY_SINGLE_CLK_REF_DIV2 BIT(12)
#define SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(x) (x << 0)
#define SPEAR1310_PCIE_SATA_MIPHY_CFG_SATA_MASK (0xFFFF)
#define SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE_MASK (0xFFFF << 16)
#define SPEAR1310_PCIE_SATA_MIPHY_CFG_SATA \
(SPEAR1310_MIPHY_DUAL_OSC_BYPASS_EXT | \
SPEAR1310_MIPHY_DUAL_CLK_REF_DIV2 | \
SPEAR1310_MIPHY_DUAL_PLL_RATIO_TOP(60) | \
SPEAR1310_MIPHY_SINGLE_OSC_BYPASS_EXT | \
SPEAR1310_MIPHY_SINGLE_CLK_REF_DIV2 | \
SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(60))
#define SPEAR1310_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK \
(SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(120))
#define SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE \
(SPEAR1310_MIPHY_DUAL_OSC_BYPASS_EXT | \
SPEAR1310_MIPHY_DUAL_PLL_RATIO_TOP(25) | \
SPEAR1310_MIPHY_SINGLE_OSC_BYPASS_EXT | \
SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(25))
#define SPEAR1310_PCIE_MIPHY_CFG_2 0x3AC
enum spear1310_miphy_mode {
SATA,
PCIE,
};
struct spear1310_miphy_priv {
/* instance id of this phy */
u32 id;
/* phy mode: 0 for SATA 1 for PCIe */
enum spear1310_miphy_mode mode;
/* regmap for any soc specific misc registers */
struct regmap *misc;
/* phy struct pointer */
struct phy *phy;
};
static int spear1310_miphy_pcie_init(struct spear1310_miphy_priv *priv)
{
u32 val;
regmap_update_bits(priv->misc, SPEAR1310_PCIE_MIPHY_CFG_1,
SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE_MASK,
SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE);
switch (priv->id) {
case 0:
val = SPEAR1310_PCIE_CFG_VAL(0);
break;
case 1:
val = SPEAR1310_PCIE_CFG_VAL(1);
break;
case 2:
val = SPEAR1310_PCIE_CFG_VAL(2);
break;
default:
return -EINVAL;
}
regmap_update_bits(priv->misc, SPEAR1310_PCIE_SATA_CFG,
SPEAR1310_PCIE_CFG_MASK(priv->id), val);
return 0;
}
static int spear1310_miphy_pcie_exit(struct spear1310_miphy_priv *priv)
{
regmap_update_bits(priv->misc, SPEAR1310_PCIE_SATA_CFG,
SPEAR1310_PCIE_CFG_MASK(priv->id), 0);
regmap_update_bits(priv->misc, SPEAR1310_PCIE_MIPHY_CFG_1,
SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE_MASK, 0);
return 0;
}
static int spear1310_miphy_init(struct phy *phy)
{
struct spear1310_miphy_priv *priv = phy_get_drvdata(phy);
int ret = 0;
if (priv->mode == PCIE)
ret = spear1310_miphy_pcie_init(priv);
return ret;
}
static int spear1310_miphy_exit(struct phy *phy)
{
struct spear1310_miphy_priv *priv = phy_get_drvdata(phy);
int ret = 0;
if (priv->mode == PCIE)
ret = spear1310_miphy_pcie_exit(priv);
return ret;
}
static const struct of_device_id spear1310_miphy_of_match[] = {
{ .compatible = "st,spear1310-miphy" },
{ },
};
MODULE_DEVICE_TABLE(of, spear1310_miphy_of_match);
static const struct phy_ops spear1310_miphy_ops = {
.init = spear1310_miphy_init,
.exit = spear1310_miphy_exit,
.owner = THIS_MODULE,
};
static struct phy *spear1310_miphy_xlate(struct device *dev,
struct of_phandle_args *args)
{
struct spear1310_miphy_priv *priv = dev_get_drvdata(dev);
if (args->args_count < 1) {
dev_err(dev, "DT did not pass correct no of args\n");
return ERR_PTR(-ENODEV);
}
priv->mode = args->args[0];
if (priv->mode != SATA && priv->mode != PCIE) {
dev_err(dev, "DT did not pass correct phy mode\n");
return ERR_PTR(-ENODEV);
}
return priv->phy;
}
static int spear1310_miphy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct spear1310_miphy_priv *priv;
struct phy_provider *phy_provider;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->misc =
syscon_regmap_lookup_by_phandle(dev->of_node, "misc");
if (IS_ERR(priv->misc)) {
dev_err(dev, "failed to find misc regmap\n");
return PTR_ERR(priv->misc);
}
if (of_property_read_u32(dev->of_node, "phy-id", &priv->id)) {
dev_err(dev, "failed to find phy id\n");
return -EINVAL;
}
priv->phy = devm_phy_create(dev, NULL, &spear1310_miphy_ops);
if (IS_ERR(priv->phy)) {
dev_err(dev, "failed to create SATA PCIe PHY\n");
return PTR_ERR(priv->phy);
}
dev_set_drvdata(dev, priv);
phy_set_drvdata(priv->phy, priv);
phy_provider =
devm_of_phy_provider_register(dev, spear1310_miphy_xlate);
if (IS_ERR(phy_provider)) {
dev_err(dev, "failed to register phy provider\n");
return PTR_ERR(phy_provider);
}
return 0;
}
static struct platform_driver spear1310_miphy_driver = {
.probe = spear1310_miphy_probe,
.driver = {
.name = "spear1310-miphy",
.of_match_table = of_match_ptr(spear1310_miphy_of_match),
},
};
module_platform_driver(spear1310_miphy_driver);
MODULE_DESCRIPTION("ST SPEAR1310-MIPHY driver");
MODULE_AUTHOR("Pratyush Anand <pratyush.anand@gmail.com>");
MODULE_LICENSE("GPL v2");