linux/net/x25/af_x25.c

1484 lines
33 KiB
C
Raw Normal View History

/*
* X.25 Packet Layer release 002
*
* This is ALPHA test software. This code may break your machine,
* randomly fail to work with new releases, misbehave and/or generally
* screw up. It might even work.
*
* This code REQUIRES 2.1.15 or higher
*
* This module:
* This module is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* History
* X.25 001 Jonathan Naylor Started coding.
* X.25 002 Jonathan Naylor Centralised disconnect handling.
* New timer architecture.
* 2000-03-11 Henner Eisen MSG_EOR handling more POSIX compliant.
* 2000-03-22 Daniela Squassoni Allowed disabling/enabling of
* facilities negotiation and increased
* the throughput upper limit.
* 2000-08-27 Arnaldo C. Melo s/suser/capable/ + micro cleanups
* 2000-09-04 Henner Eisen Set sock->state in x25_accept().
* Fixed x25_output() related skb leakage.
* 2000-10-02 Henner Eisen Made x25_kick() single threaded per socket.
* 2000-10-27 Henner Eisen MSG_DONTWAIT for fragment allocation.
* 2000-11-14 Henner Eisen Closing datalink from NETDEV_GOING_DOWN
* 2002-10-06 Arnaldo C. Melo Get rid of cli/sti, move proc stuff to
* x25_proc.c, using seq_file
[X25]: Selective sub-address matching with call user data. From: Shaun Pereira <spereira@tusc.com.au> This is the first (independent of the second) patch of two that I am working on with x25 on linux (tested with xot on a cisco router). Details are as follows. Current state of module: A server using the current implementation (2.6.11.7) of the x25 module will accept a call request/ incoming call packet at the listening x.25 address, from all callers to that address, as long as NO call user data is present in the packet header. If the server needs to choose to accept a particular call request/ incoming call packet arriving at its listening x25 address, then the kernel has to allow a match of call user data present in the call request packet with its own. This is required when multiple servers listen at the same x25 address and device interface. The kernel currently matches ALL call user data, if present. Current Changes: This patch is a follow up to the patch submitted previously by Andrew Hendry, and allows the user to selectively control the number of octets of call user data in the call request packet, that the kernel will match. By default no call user data is matched, even if call user data is present. To allow call user data matching, a cudmatchlength > 0 has to be passed into the kernel after which the passed number of octets will be matched. Otherwise the kernel behavior is exactly as the original implementation. This patch also ensures that as is normally the case, no call user data will be present in the Call accepted / call connected packet sent back to the caller Future Changes on next patch: There are cases however when call user data may be present in the call accepted packet. According to the X.25 recommendation (ITU-T 10/96) section 5.2.3.2 call user data may be present in the call accepted packet provided the fast select facility is used. My next patch will include this fast select utility and the ability to send up to 128 octets call user data in the call accepted packet provided the fast select facility is used. I am currently testing this, again with xot on linux and cisco. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> (With a fix from Alexey Dobriyan <adobriyan@gmail.com>) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-23 07:15:01 +02:00
* 2005-04-02 Shaun Pereira Selective sub address matching
* with call user data
[X25]: Fast select with no restriction on response This patch is a follow up to patch 1 regarding "Selective Sub Address matching with call user data". It allows use of the Fast-Select-Acceptance optional user facility for X.25. This patch just implements fast select with no restriction on response (NRR). What this means (according to ITU-T Recomendation 10/96 section 6.16) is that if in an incoming call packet, the relevant facility bits are set for fast-select-NRR, then the called DTE can issue a direct response to the incoming packet using a call-accepted packet that contains call-user-data. This patch allows such a response. The called DTE can also respond with a clear-request packet that contains call-user-data. However, this feature is currently not implemented by the patch. How is Fast Select Acceptance used? By default, the system does not allow fast select acceptance (as before). To enable a response to fast select acceptance, After a listen socket in created and bound as follows socket(AF_X25, SOCK_SEQPACKET, 0); bind(call_soc, (struct sockaddr *)&locl_addr, sizeof(locl_addr)); but before a listen system call is made, the following ioctl should be used. ioctl(call_soc,SIOCX25CALLACCPTAPPRV); Now the listen system call can be made listen(call_soc, 4); After this, an incoming-call packet will be accepted, but no call-accepted packet will be sent back until the following system call is made on the socket that accepts the call ioctl(vc_soc,SIOCX25SENDCALLACCPT); The network (or cisco xot router used for testing here) will allow the application server's call-user-data in the call-accepted packet, provided the call-request was made with Fast-select NRR. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-23 07:16:17 +02:00
* 2005-04-15 Shaun Pereira Fast select with no restriction on
* response
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/capability.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/timer.h>
#include <linux/string.h>
#include <linux/net.h>
#include <linux/netdevice.h>
#include <linux/if_arp.h>
#include <linux/skbuff.h>
#include <net/sock.h>
#include <net/tcp_states.h>
#include <asm/uaccess.h>
#include <linux/fcntl.h>
#include <linux/termios.h> /* For TIOCINQ/OUTQ */
#include <linux/notifier.h>
#include <linux/init.h>
#include <net/x25.h>
int sysctl_x25_restart_request_timeout = X25_DEFAULT_T20;
int sysctl_x25_call_request_timeout = X25_DEFAULT_T21;
int sysctl_x25_reset_request_timeout = X25_DEFAULT_T22;
int sysctl_x25_clear_request_timeout = X25_DEFAULT_T23;
int sysctl_x25_ack_holdback_timeout = X25_DEFAULT_T2;
HLIST_HEAD(x25_list);
DEFINE_RWLOCK(x25_list_lock);
static const struct proto_ops x25_proto_ops;
static struct x25_address null_x25_address = {" "};
int x25_addr_ntoa(unsigned char *p, struct x25_address *called_addr,
struct x25_address *calling_addr)
{
int called_len, calling_len;
char *called, *calling;
int i;
called_len = (*p >> 0) & 0x0F;
calling_len = (*p >> 4) & 0x0F;
called = called_addr->x25_addr;
calling = calling_addr->x25_addr;
p++;
for (i = 0; i < (called_len + calling_len); i++) {
if (i < called_len) {
if (i % 2 != 0) {
*called++ = ((*p >> 0) & 0x0F) + '0';
p++;
} else {
*called++ = ((*p >> 4) & 0x0F) + '0';
}
} else {
if (i % 2 != 0) {
*calling++ = ((*p >> 0) & 0x0F) + '0';
p++;
} else {
*calling++ = ((*p >> 4) & 0x0F) + '0';
}
}
}
*called = *calling = '\0';
return 1 + (called_len + calling_len + 1) / 2;
}
int x25_addr_aton(unsigned char *p, struct x25_address *called_addr,
struct x25_address *calling_addr)
{
unsigned int called_len, calling_len;
char *called, *calling;
int i;
called = called_addr->x25_addr;
calling = calling_addr->x25_addr;
called_len = strlen(called);
calling_len = strlen(calling);
*p++ = (calling_len << 4) | (called_len << 0);
for (i = 0; i < (called_len + calling_len); i++) {
if (i < called_len) {
if (i % 2 != 0) {
*p |= (*called++ - '0') << 0;
p++;
} else {
*p = 0x00;
*p |= (*called++ - '0') << 4;
}
} else {
if (i % 2 != 0) {
*p |= (*calling++ - '0') << 0;
p++;
} else {
*p = 0x00;
*p |= (*calling++ - '0') << 4;
}
}
}
return 1 + (called_len + calling_len + 1) / 2;
}
/*
* Socket removal during an interrupt is now safe.
*/
static void x25_remove_socket(struct sock *sk)
{
write_lock_bh(&x25_list_lock);
sk_del_node_init(sk);
write_unlock_bh(&x25_list_lock);
}
/*
* Kill all bound sockets on a dropped device.
*/
static void x25_kill_by_device(struct net_device *dev)
{
struct sock *s;
struct hlist_node *node;
write_lock_bh(&x25_list_lock);
sk_for_each(s, node, &x25_list)
if (x25_sk(s)->neighbour && x25_sk(s)->neighbour->dev == dev)
x25_disconnect(s, ENETUNREACH, 0, 0);
write_unlock_bh(&x25_list_lock);
}
/*
* Handle device status changes.
*/
static int x25_device_event(struct notifier_block *this, unsigned long event,
void *ptr)
{
struct net_device *dev = ptr;
struct x25_neigh *nb;
if (dev->type == ARPHRD_X25
#if defined(CONFIG_LLC) || defined(CONFIG_LLC_MODULE)
|| dev->type == ARPHRD_ETHER
#endif
) {
switch (event) {
case NETDEV_UP:
x25_link_device_up(dev);
break;
case NETDEV_GOING_DOWN:
nb = x25_get_neigh(dev);
if (nb) {
x25_terminate_link(nb);
x25_neigh_put(nb);
}
break;
case NETDEV_DOWN:
x25_kill_by_device(dev);
x25_route_device_down(dev);
x25_link_device_down(dev);
break;
}
}
return NOTIFY_DONE;
}
/*
* Add a socket to the bound sockets list.
*/
static void x25_insert_socket(struct sock *sk)
{
write_lock_bh(&x25_list_lock);
sk_add_node(sk, &x25_list);
write_unlock_bh(&x25_list_lock);
}
/*
* Find a socket that wants to accept the Call Request we just
* received. Check the full list for an address/cud match.
* If no cuds match return the next_best thing, an address match.
* Note: if a listening socket has cud set it must only get calls
* with matching cud.
*/
[X25]: Selective sub-address matching with call user data. From: Shaun Pereira <spereira@tusc.com.au> This is the first (independent of the second) patch of two that I am working on with x25 on linux (tested with xot on a cisco router). Details are as follows. Current state of module: A server using the current implementation (2.6.11.7) of the x25 module will accept a call request/ incoming call packet at the listening x.25 address, from all callers to that address, as long as NO call user data is present in the packet header. If the server needs to choose to accept a particular call request/ incoming call packet arriving at its listening x25 address, then the kernel has to allow a match of call user data present in the call request packet with its own. This is required when multiple servers listen at the same x25 address and device interface. The kernel currently matches ALL call user data, if present. Current Changes: This patch is a follow up to the patch submitted previously by Andrew Hendry, and allows the user to selectively control the number of octets of call user data in the call request packet, that the kernel will match. By default no call user data is matched, even if call user data is present. To allow call user data matching, a cudmatchlength > 0 has to be passed into the kernel after which the passed number of octets will be matched. Otherwise the kernel behavior is exactly as the original implementation. This patch also ensures that as is normally the case, no call user data will be present in the Call accepted / call connected packet sent back to the caller Future Changes on next patch: There are cases however when call user data may be present in the call accepted packet. According to the X.25 recommendation (ITU-T 10/96) section 5.2.3.2 call user data may be present in the call accepted packet provided the fast select facility is used. My next patch will include this fast select utility and the ability to send up to 128 octets call user data in the call accepted packet provided the fast select facility is used. I am currently testing this, again with xot on linux and cisco. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> (With a fix from Alexey Dobriyan <adobriyan@gmail.com>) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-23 07:15:01 +02:00
static struct sock *x25_find_listener(struct x25_address *addr,
struct sk_buff *skb)
{
struct sock *s;
struct sock *next_best;
struct hlist_node *node;
read_lock_bh(&x25_list_lock);
next_best = NULL;
sk_for_each(s, node, &x25_list)
if ((!strcmp(addr->x25_addr,
[X25]: Selective sub-address matching with call user data. From: Shaun Pereira <spereira@tusc.com.au> This is the first (independent of the second) patch of two that I am working on with x25 on linux (tested with xot on a cisco router). Details are as follows. Current state of module: A server using the current implementation (2.6.11.7) of the x25 module will accept a call request/ incoming call packet at the listening x.25 address, from all callers to that address, as long as NO call user data is present in the packet header. If the server needs to choose to accept a particular call request/ incoming call packet arriving at its listening x25 address, then the kernel has to allow a match of call user data present in the call request packet with its own. This is required when multiple servers listen at the same x25 address and device interface. The kernel currently matches ALL call user data, if present. Current Changes: This patch is a follow up to the patch submitted previously by Andrew Hendry, and allows the user to selectively control the number of octets of call user data in the call request packet, that the kernel will match. By default no call user data is matched, even if call user data is present. To allow call user data matching, a cudmatchlength > 0 has to be passed into the kernel after which the passed number of octets will be matched. Otherwise the kernel behavior is exactly as the original implementation. This patch also ensures that as is normally the case, no call user data will be present in the Call accepted / call connected packet sent back to the caller Future Changes on next patch: There are cases however when call user data may be present in the call accepted packet. According to the X.25 recommendation (ITU-T 10/96) section 5.2.3.2 call user data may be present in the call accepted packet provided the fast select facility is used. My next patch will include this fast select utility and the ability to send up to 128 octets call user data in the call accepted packet provided the fast select facility is used. I am currently testing this, again with xot on linux and cisco. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> (With a fix from Alexey Dobriyan <adobriyan@gmail.com>) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-23 07:15:01 +02:00
x25_sk(s)->source_addr.x25_addr) ||
!strcmp(addr->x25_addr,
null_x25_address.x25_addr)) &&
s->sk_state == TCP_LISTEN) {
/*
* Found a listening socket, now check the incoming
* call user data vs this sockets call user data
*/
[X25]: Selective sub-address matching with call user data. From: Shaun Pereira <spereira@tusc.com.au> This is the first (independent of the second) patch of two that I am working on with x25 on linux (tested with xot on a cisco router). Details are as follows. Current state of module: A server using the current implementation (2.6.11.7) of the x25 module will accept a call request/ incoming call packet at the listening x.25 address, from all callers to that address, as long as NO call user data is present in the packet header. If the server needs to choose to accept a particular call request/ incoming call packet arriving at its listening x25 address, then the kernel has to allow a match of call user data present in the call request packet with its own. This is required when multiple servers listen at the same x25 address and device interface. The kernel currently matches ALL call user data, if present. Current Changes: This patch is a follow up to the patch submitted previously by Andrew Hendry, and allows the user to selectively control the number of octets of call user data in the call request packet, that the kernel will match. By default no call user data is matched, even if call user data is present. To allow call user data matching, a cudmatchlength > 0 has to be passed into the kernel after which the passed number of octets will be matched. Otherwise the kernel behavior is exactly as the original implementation. This patch also ensures that as is normally the case, no call user data will be present in the Call accepted / call connected packet sent back to the caller Future Changes on next patch: There are cases however when call user data may be present in the call accepted packet. According to the X.25 recommendation (ITU-T 10/96) section 5.2.3.2 call user data may be present in the call accepted packet provided the fast select facility is used. My next patch will include this fast select utility and the ability to send up to 128 octets call user data in the call accepted packet provided the fast select facility is used. I am currently testing this, again with xot on linux and cisco. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> (With a fix from Alexey Dobriyan <adobriyan@gmail.com>) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-23 07:15:01 +02:00
if(skb->len > 0 && x25_sk(s)->cudmatchlength > 0) {
if((memcmp(x25_sk(s)->calluserdata.cuddata,
skb->data,
x25_sk(s)->cudmatchlength)) == 0) {
sock_hold(s);
goto found;
}
} else
next_best = s;
}
if (next_best) {
s = next_best;
sock_hold(s);
goto found;
}
s = NULL;
found:
read_unlock_bh(&x25_list_lock);
return s;
}
/*
* Find a connected X.25 socket given my LCI and neighbour.
*/
static struct sock *__x25_find_socket(unsigned int lci, struct x25_neigh *nb)
{
struct sock *s;
struct hlist_node *node;
sk_for_each(s, node, &x25_list)
if (x25_sk(s)->lci == lci && x25_sk(s)->neighbour == nb) {
sock_hold(s);
goto found;
}
s = NULL;
found:
return s;
}
struct sock *x25_find_socket(unsigned int lci, struct x25_neigh *nb)
{
struct sock *s;
read_lock_bh(&x25_list_lock);
s = __x25_find_socket(lci, nb);
read_unlock_bh(&x25_list_lock);
return s;
}
/*
* Find a unique LCI for a given device.
*/
static unsigned int x25_new_lci(struct x25_neigh *nb)
{
unsigned int lci = 1;
struct sock *sk;
read_lock_bh(&x25_list_lock);
while ((sk = __x25_find_socket(lci, nb)) != NULL) {
sock_put(sk);
if (++lci == 4096) {
lci = 0;
break;
}
}
read_unlock_bh(&x25_list_lock);
return lci;
}
/*
* Deferred destroy.
*/
void x25_destroy_socket(struct sock *);
/*
* handler for deferred kills.
*/
static void x25_destroy_timer(unsigned long data)
{
x25_destroy_socket((struct sock *)data);
}
/*
* This is called from user mode and the timers. Thus it protects itself
* against interrupt users but doesn't worry about being called during
* work. Once it is removed from the queue no interrupt or bottom half
* will touch it and we are (fairly 8-) ) safe.
* Not static as it's used by the timer
*/
void x25_destroy_socket(struct sock *sk)
{
struct sk_buff *skb;
sock_hold(sk);
lock_sock(sk);
x25_stop_heartbeat(sk);
x25_stop_timer(sk);
x25_remove_socket(sk);
x25_clear_queues(sk); /* Flush the queues */
while ((skb = skb_dequeue(&sk->sk_receive_queue)) != NULL) {
if (skb->sk != sk) { /* A pending connection */
/*
* Queue the unaccepted socket for death
*/
sock_set_flag(skb->sk, SOCK_DEAD);
x25_start_heartbeat(skb->sk);
x25_sk(skb->sk)->state = X25_STATE_0;
}
kfree_skb(skb);
}
if (atomic_read(&sk->sk_wmem_alloc) ||
atomic_read(&sk->sk_rmem_alloc)) {
/* Defer: outstanding buffers */
sk->sk_timer.expires = jiffies + 10 * HZ;
sk->sk_timer.function = x25_destroy_timer;
sk->sk_timer.data = (unsigned long)sk;
add_timer(&sk->sk_timer);
} else {
/* drop last reference so sock_put will free */
__sock_put(sk);
}
release_sock(sk);
sock_put(sk);
}
/*
* Handling for system calls applied via the various interfaces to a
* X.25 socket object.
*/
static int x25_setsockopt(struct socket *sock, int level, int optname,
char __user *optval, int optlen)
{
int opt;
struct sock *sk = sock->sk;
int rc = -ENOPROTOOPT;
if (level != SOL_X25 || optname != X25_QBITINCL)
goto out;
rc = -EINVAL;
if (optlen < sizeof(int))
goto out;
rc = -EFAULT;
if (get_user(opt, (int __user *)optval))
goto out;
x25_sk(sk)->qbitincl = !!opt;
rc = 0;
out:
return rc;
}
static int x25_getsockopt(struct socket *sock, int level, int optname,
char __user *optval, int __user *optlen)
{
struct sock *sk = sock->sk;
int val, len, rc = -ENOPROTOOPT;
if (level != SOL_X25 || optname != X25_QBITINCL)
goto out;
rc = -EFAULT;
if (get_user(len, optlen))
goto out;
len = min_t(unsigned int, len, sizeof(int));
rc = -EINVAL;
if (len < 0)
goto out;
rc = -EFAULT;
if (put_user(len, optlen))
goto out;
val = x25_sk(sk)->qbitincl;
rc = copy_to_user(optval, &val, len) ? -EFAULT : 0;
out:
return rc;
}
static int x25_listen(struct socket *sock, int backlog)
{
struct sock *sk = sock->sk;
int rc = -EOPNOTSUPP;
if (sk->sk_state != TCP_LISTEN) {
memset(&x25_sk(sk)->dest_addr, 0, X25_ADDR_LEN);
sk->sk_max_ack_backlog = backlog;
sk->sk_state = TCP_LISTEN;
rc = 0;
}
return rc;
}
static struct proto x25_proto = {
.name = "X25",
.owner = THIS_MODULE,
.obj_size = sizeof(struct x25_sock),
};
static struct sock *x25_alloc_socket(void)
{
struct x25_sock *x25;
struct sock *sk = sk_alloc(AF_X25, GFP_ATOMIC, &x25_proto, 1);
if (!sk)
goto out;
sock_init_data(NULL, sk);
x25 = x25_sk(sk);
skb_queue_head_init(&x25->ack_queue);
skb_queue_head_init(&x25->fragment_queue);
skb_queue_head_init(&x25->interrupt_in_queue);
skb_queue_head_init(&x25->interrupt_out_queue);
out:
return sk;
}
void x25_init_timers(struct sock *sk);
static int x25_create(struct socket *sock, int protocol)
{
struct sock *sk;
struct x25_sock *x25;
int rc = -ESOCKTNOSUPPORT;
if (sock->type != SOCK_SEQPACKET || protocol)
goto out;
rc = -ENOMEM;
if ((sk = x25_alloc_socket()) == NULL)
goto out;
x25 = x25_sk(sk);
sock_init_data(sock, sk);
x25_init_timers(sk);
sock->ops = &x25_proto_ops;
sk->sk_protocol = protocol;
sk->sk_backlog_rcv = x25_backlog_rcv;
x25->t21 = sysctl_x25_call_request_timeout;
x25->t22 = sysctl_x25_reset_request_timeout;
x25->t23 = sysctl_x25_clear_request_timeout;
x25->t2 = sysctl_x25_ack_holdback_timeout;
x25->state = X25_STATE_0;
[X25]: Selective sub-address matching with call user data. From: Shaun Pereira <spereira@tusc.com.au> This is the first (independent of the second) patch of two that I am working on with x25 on linux (tested with xot on a cisco router). Details are as follows. Current state of module: A server using the current implementation (2.6.11.7) of the x25 module will accept a call request/ incoming call packet at the listening x.25 address, from all callers to that address, as long as NO call user data is present in the packet header. If the server needs to choose to accept a particular call request/ incoming call packet arriving at its listening x25 address, then the kernel has to allow a match of call user data present in the call request packet with its own. This is required when multiple servers listen at the same x25 address and device interface. The kernel currently matches ALL call user data, if present. Current Changes: This patch is a follow up to the patch submitted previously by Andrew Hendry, and allows the user to selectively control the number of octets of call user data in the call request packet, that the kernel will match. By default no call user data is matched, even if call user data is present. To allow call user data matching, a cudmatchlength > 0 has to be passed into the kernel after which the passed number of octets will be matched. Otherwise the kernel behavior is exactly as the original implementation. This patch also ensures that as is normally the case, no call user data will be present in the Call accepted / call connected packet sent back to the caller Future Changes on next patch: There are cases however when call user data may be present in the call accepted packet. According to the X.25 recommendation (ITU-T 10/96) section 5.2.3.2 call user data may be present in the call accepted packet provided the fast select facility is used. My next patch will include this fast select utility and the ability to send up to 128 octets call user data in the call accepted packet provided the fast select facility is used. I am currently testing this, again with xot on linux and cisco. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> (With a fix from Alexey Dobriyan <adobriyan@gmail.com>) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-23 07:15:01 +02:00
x25->cudmatchlength = 0;
[X25]: Fast select with no restriction on response This patch is a follow up to patch 1 regarding "Selective Sub Address matching with call user data". It allows use of the Fast-Select-Acceptance optional user facility for X.25. This patch just implements fast select with no restriction on response (NRR). What this means (according to ITU-T Recomendation 10/96 section 6.16) is that if in an incoming call packet, the relevant facility bits are set for fast-select-NRR, then the called DTE can issue a direct response to the incoming packet using a call-accepted packet that contains call-user-data. This patch allows such a response. The called DTE can also respond with a clear-request packet that contains call-user-data. However, this feature is currently not implemented by the patch. How is Fast Select Acceptance used? By default, the system does not allow fast select acceptance (as before). To enable a response to fast select acceptance, After a listen socket in created and bound as follows socket(AF_X25, SOCK_SEQPACKET, 0); bind(call_soc, (struct sockaddr *)&locl_addr, sizeof(locl_addr)); but before a listen system call is made, the following ioctl should be used. ioctl(call_soc,SIOCX25CALLACCPTAPPRV); Now the listen system call can be made listen(call_soc, 4); After this, an incoming-call packet will be accepted, but no call-accepted packet will be sent back until the following system call is made on the socket that accepts the call ioctl(vc_soc,SIOCX25SENDCALLACCPT); The network (or cisco xot router used for testing here) will allow the application server's call-user-data in the call-accepted packet, provided the call-request was made with Fast-select NRR. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-23 07:16:17 +02:00
x25->accptapprv = X25_DENY_ACCPT_APPRV; /* normally no cud */
/* on call accept */
x25->facilities.winsize_in = X25_DEFAULT_WINDOW_SIZE;
x25->facilities.winsize_out = X25_DEFAULT_WINDOW_SIZE;
x25->facilities.pacsize_in = X25_DEFAULT_PACKET_SIZE;
x25->facilities.pacsize_out = X25_DEFAULT_PACKET_SIZE;
x25->facilities.throughput = X25_DEFAULT_THROUGHPUT;
x25->facilities.reverse = X25_DEFAULT_REVERSE;
rc = 0;
out:
return rc;
}
static struct sock *x25_make_new(struct sock *osk)
{
struct sock *sk = NULL;
struct x25_sock *x25, *ox25;
if (osk->sk_type != SOCK_SEQPACKET)
goto out;
if ((sk = x25_alloc_socket()) == NULL)
goto out;
x25 = x25_sk(sk);
sk->sk_type = osk->sk_type;
sk->sk_socket = osk->sk_socket;
sk->sk_priority = osk->sk_priority;
sk->sk_protocol = osk->sk_protocol;
sk->sk_rcvbuf = osk->sk_rcvbuf;
sk->sk_sndbuf = osk->sk_sndbuf;
sk->sk_state = TCP_ESTABLISHED;
sk->sk_sleep = osk->sk_sleep;
sk->sk_backlog_rcv = osk->sk_backlog_rcv;
sock_copy_flags(sk, osk);
ox25 = x25_sk(osk);
x25->t21 = ox25->t21;
x25->t22 = ox25->t22;
x25->t23 = ox25->t23;
x25->t2 = ox25->t2;
x25->facilities = ox25->facilities;
x25->qbitincl = ox25->qbitincl;
[X25]: Selective sub-address matching with call user data. From: Shaun Pereira <spereira@tusc.com.au> This is the first (independent of the second) patch of two that I am working on with x25 on linux (tested with xot on a cisco router). Details are as follows. Current state of module: A server using the current implementation (2.6.11.7) of the x25 module will accept a call request/ incoming call packet at the listening x.25 address, from all callers to that address, as long as NO call user data is present in the packet header. If the server needs to choose to accept a particular call request/ incoming call packet arriving at its listening x25 address, then the kernel has to allow a match of call user data present in the call request packet with its own. This is required when multiple servers listen at the same x25 address and device interface. The kernel currently matches ALL call user data, if present. Current Changes: This patch is a follow up to the patch submitted previously by Andrew Hendry, and allows the user to selectively control the number of octets of call user data in the call request packet, that the kernel will match. By default no call user data is matched, even if call user data is present. To allow call user data matching, a cudmatchlength > 0 has to be passed into the kernel after which the passed number of octets will be matched. Otherwise the kernel behavior is exactly as the original implementation. This patch also ensures that as is normally the case, no call user data will be present in the Call accepted / call connected packet sent back to the caller Future Changes on next patch: There are cases however when call user data may be present in the call accepted packet. According to the X.25 recommendation (ITU-T 10/96) section 5.2.3.2 call user data may be present in the call accepted packet provided the fast select facility is used. My next patch will include this fast select utility and the ability to send up to 128 octets call user data in the call accepted packet provided the fast select facility is used. I am currently testing this, again with xot on linux and cisco. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> (With a fix from Alexey Dobriyan <adobriyan@gmail.com>) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-23 07:15:01 +02:00
x25->cudmatchlength = ox25->cudmatchlength;
[X25]: Fast select with no restriction on response This patch is a follow up to patch 1 regarding "Selective Sub Address matching with call user data". It allows use of the Fast-Select-Acceptance optional user facility for X.25. This patch just implements fast select with no restriction on response (NRR). What this means (according to ITU-T Recomendation 10/96 section 6.16) is that if in an incoming call packet, the relevant facility bits are set for fast-select-NRR, then the called DTE can issue a direct response to the incoming packet using a call-accepted packet that contains call-user-data. This patch allows such a response. The called DTE can also respond with a clear-request packet that contains call-user-data. However, this feature is currently not implemented by the patch. How is Fast Select Acceptance used? By default, the system does not allow fast select acceptance (as before). To enable a response to fast select acceptance, After a listen socket in created and bound as follows socket(AF_X25, SOCK_SEQPACKET, 0); bind(call_soc, (struct sockaddr *)&locl_addr, sizeof(locl_addr)); but before a listen system call is made, the following ioctl should be used. ioctl(call_soc,SIOCX25CALLACCPTAPPRV); Now the listen system call can be made listen(call_soc, 4); After this, an incoming-call packet will be accepted, but no call-accepted packet will be sent back until the following system call is made on the socket that accepts the call ioctl(vc_soc,SIOCX25SENDCALLACCPT); The network (or cisco xot router used for testing here) will allow the application server's call-user-data in the call-accepted packet, provided the call-request was made with Fast-select NRR. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-23 07:16:17 +02:00
x25->accptapprv = ox25->accptapprv;
x25_init_timers(sk);
out:
return sk;
}
static int x25_release(struct socket *sock)
{
struct sock *sk = sock->sk;
struct x25_sock *x25;
if (!sk)
goto out;
x25 = x25_sk(sk);
switch (x25->state) {
case X25_STATE_0:
case X25_STATE_2:
x25_disconnect(sk, 0, 0, 0);
x25_destroy_socket(sk);
goto out;
case X25_STATE_1:
case X25_STATE_3:
case X25_STATE_4:
x25_clear_queues(sk);
x25_write_internal(sk, X25_CLEAR_REQUEST);
x25_start_t23timer(sk);
x25->state = X25_STATE_2;
sk->sk_state = TCP_CLOSE;
sk->sk_shutdown |= SEND_SHUTDOWN;
sk->sk_state_change(sk);
sock_set_flag(sk, SOCK_DEAD);
sock_set_flag(sk, SOCK_DESTROY);
break;
}
sock->sk = NULL;
sk->sk_socket = NULL; /* Not used, but we should do this */
out:
return 0;
}
static int x25_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)
{
struct sock *sk = sock->sk;
struct sockaddr_x25 *addr = (struct sockaddr_x25 *)uaddr;
if (!sock_flag(sk, SOCK_ZAPPED) ||
addr_len != sizeof(struct sockaddr_x25) ||
addr->sx25_family != AF_X25)
return -EINVAL;
x25_sk(sk)->source_addr = addr->sx25_addr;
x25_insert_socket(sk);
sock_reset_flag(sk, SOCK_ZAPPED);
SOCK_DEBUG(sk, "x25_bind: socket is bound\n");
return 0;
}
static int x25_wait_for_connection_establishment(struct sock *sk)
{
DECLARE_WAITQUEUE(wait, current);
int rc;
add_wait_queue_exclusive(sk->sk_sleep, &wait);
for (;;) {
__set_current_state(TASK_INTERRUPTIBLE);
rc = -ERESTARTSYS;
if (signal_pending(current))
break;
rc = sock_error(sk);
if (rc) {
sk->sk_socket->state = SS_UNCONNECTED;
break;
}
rc = 0;
if (sk->sk_state != TCP_ESTABLISHED) {
release_sock(sk);
schedule();
lock_sock(sk);
} else
break;
}
__set_current_state(TASK_RUNNING);
remove_wait_queue(sk->sk_sleep, &wait);
return rc;
}
static int x25_connect(struct socket *sock, struct sockaddr *uaddr,
int addr_len, int flags)
{
struct sock *sk = sock->sk;
struct x25_sock *x25 = x25_sk(sk);
struct sockaddr_x25 *addr = (struct sockaddr_x25 *)uaddr;
struct x25_route *rt;
int rc = 0;
lock_sock(sk);
if (sk->sk_state == TCP_ESTABLISHED && sock->state == SS_CONNECTING) {
sock->state = SS_CONNECTED;
goto out; /* Connect completed during a ERESTARTSYS event */
}
rc = -ECONNREFUSED;
if (sk->sk_state == TCP_CLOSE && sock->state == SS_CONNECTING) {
sock->state = SS_UNCONNECTED;
goto out;
}
rc = -EISCONN; /* No reconnect on a seqpacket socket */
if (sk->sk_state == TCP_ESTABLISHED)
goto out;
sk->sk_state = TCP_CLOSE;
sock->state = SS_UNCONNECTED;
rc = -EINVAL;
if (addr_len != sizeof(struct sockaddr_x25) ||
addr->sx25_family != AF_X25)
goto out;
rc = -ENETUNREACH;
rt = x25_get_route(&addr->sx25_addr);
if (!rt)
goto out;
x25->neighbour = x25_get_neigh(rt->dev);
if (!x25->neighbour)
goto out_put_route;
x25_limit_facilities(&x25->facilities, x25->neighbour);
x25->lci = x25_new_lci(x25->neighbour);
if (!x25->lci)
goto out_put_neigh;
rc = -EINVAL;
if (sock_flag(sk, SOCK_ZAPPED)) /* Must bind first - autobinding does not work */
goto out_put_neigh;
if (!strcmp(x25->source_addr.x25_addr, null_x25_address.x25_addr))
memset(&x25->source_addr, '\0', X25_ADDR_LEN);
x25->dest_addr = addr->sx25_addr;
/* Move to connecting socket, start sending Connect Requests */
sock->state = SS_CONNECTING;
sk->sk_state = TCP_SYN_SENT;
x25->state = X25_STATE_1;
x25_write_internal(sk, X25_CALL_REQUEST);
x25_start_heartbeat(sk);
x25_start_t21timer(sk);
/* Now the loop */
rc = -EINPROGRESS;
if (sk->sk_state != TCP_ESTABLISHED && (flags & O_NONBLOCK))
goto out_put_neigh;
rc = x25_wait_for_connection_establishment(sk);
if (rc)
goto out_put_neigh;
sock->state = SS_CONNECTED;
rc = 0;
out_put_neigh:
if (rc)
x25_neigh_put(x25->neighbour);
out_put_route:
x25_route_put(rt);
out:
release_sock(sk);
return rc;
}
static int x25_wait_for_data(struct sock *sk, int timeout)
{
DECLARE_WAITQUEUE(wait, current);
int rc = 0;
add_wait_queue_exclusive(sk->sk_sleep, &wait);
for (;;) {
__set_current_state(TASK_INTERRUPTIBLE);
if (sk->sk_shutdown & RCV_SHUTDOWN)
break;
rc = -ERESTARTSYS;
if (signal_pending(current))
break;
rc = -EAGAIN;
if (!timeout)
break;
rc = 0;
if (skb_queue_empty(&sk->sk_receive_queue)) {
release_sock(sk);
timeout = schedule_timeout(timeout);
lock_sock(sk);
} else
break;
}
__set_current_state(TASK_RUNNING);
remove_wait_queue(sk->sk_sleep, &wait);
return rc;
}
static int x25_accept(struct socket *sock, struct socket *newsock, int flags)
{
struct sock *sk = sock->sk;
struct sock *newsk;
struct sk_buff *skb;
int rc = -EINVAL;
if (!sk || sk->sk_state != TCP_LISTEN)
goto out;
rc = -EOPNOTSUPP;
if (sk->sk_type != SOCK_SEQPACKET)
goto out;
lock_sock(sk);
rc = x25_wait_for_data(sk, sk->sk_rcvtimeo);
if (rc)
goto out2;
skb = skb_dequeue(&sk->sk_receive_queue);
rc = -EINVAL;
if (!skb->sk)
goto out2;
newsk = skb->sk;
newsk->sk_socket = newsock;
newsk->sk_sleep = &newsock->wait;
/* Now attach up the new socket */
skb->sk = NULL;
kfree_skb(skb);
sk->sk_ack_backlog--;
newsock->sk = newsk;
newsock->state = SS_CONNECTED;
rc = 0;
out2:
release_sock(sk);
out:
return rc;
}
static int x25_getname(struct socket *sock, struct sockaddr *uaddr,
int *uaddr_len, int peer)
{
struct sockaddr_x25 *sx25 = (struct sockaddr_x25 *)uaddr;
struct sock *sk = sock->sk;
struct x25_sock *x25 = x25_sk(sk);
if (peer) {
if (sk->sk_state != TCP_ESTABLISHED)
return -ENOTCONN;
sx25->sx25_addr = x25->dest_addr;
} else
sx25->sx25_addr = x25->source_addr;
sx25->sx25_family = AF_X25;
*uaddr_len = sizeof(*sx25);
return 0;
}
int x25_rx_call_request(struct sk_buff *skb, struct x25_neigh *nb,
unsigned int lci)
{
struct sock *sk;
struct sock *make;
struct x25_sock *makex25;
struct x25_address source_addr, dest_addr;
struct x25_facilities facilities;
int len, rc;
/*
* Remove the LCI and frame type.
*/
skb_pull(skb, X25_STD_MIN_LEN);
/*
* Extract the X.25 addresses and convert them to ASCII strings,
* and remove them.
*/
skb_pull(skb, x25_addr_ntoa(skb->data, &source_addr, &dest_addr));
/*
* Get the length of the facilities, skip past them for the moment
* get the call user data because this is needed to determine
* the correct listener
*/
len = skb->data[0] + 1;
skb_pull(skb,len);
/*
* Find a listener for the particular address/cud pair.
*/
[X25]: Selective sub-address matching with call user data. From: Shaun Pereira <spereira@tusc.com.au> This is the first (independent of the second) patch of two that I am working on with x25 on linux (tested with xot on a cisco router). Details are as follows. Current state of module: A server using the current implementation (2.6.11.7) of the x25 module will accept a call request/ incoming call packet at the listening x.25 address, from all callers to that address, as long as NO call user data is present in the packet header. If the server needs to choose to accept a particular call request/ incoming call packet arriving at its listening x25 address, then the kernel has to allow a match of call user data present in the call request packet with its own. This is required when multiple servers listen at the same x25 address and device interface. The kernel currently matches ALL call user data, if present. Current Changes: This patch is a follow up to the patch submitted previously by Andrew Hendry, and allows the user to selectively control the number of octets of call user data in the call request packet, that the kernel will match. By default no call user data is matched, even if call user data is present. To allow call user data matching, a cudmatchlength > 0 has to be passed into the kernel after which the passed number of octets will be matched. Otherwise the kernel behavior is exactly as the original implementation. This patch also ensures that as is normally the case, no call user data will be present in the Call accepted / call connected packet sent back to the caller Future Changes on next patch: There are cases however when call user data may be present in the call accepted packet. According to the X.25 recommendation (ITU-T 10/96) section 5.2.3.2 call user data may be present in the call accepted packet provided the fast select facility is used. My next patch will include this fast select utility and the ability to send up to 128 octets call user data in the call accepted packet provided the fast select facility is used. I am currently testing this, again with xot on linux and cisco. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> (With a fix from Alexey Dobriyan <adobriyan@gmail.com>) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-23 07:15:01 +02:00
sk = x25_find_listener(&source_addr,skb);
skb_push(skb,len);
/*
* We can't accept the Call Request.
*/
if (sk == NULL || sk_acceptq_is_full(sk))
goto out_clear_request;
/*
* Try to reach a compromise on the requested facilities.
*/
if ((len = x25_negotiate_facilities(skb, sk, &facilities)) == -1)
goto out_sock_put;
/*
* current neighbour/link might impose additional limits
* on certain facilties
*/
x25_limit_facilities(&facilities, nb);
/*
* Try to create a new socket.
*/
make = x25_make_new(sk);
if (!make)
goto out_sock_put;
/*
* Remove the facilities
*/
skb_pull(skb, len);
skb->sk = make;
make->sk_state = TCP_ESTABLISHED;
makex25 = x25_sk(make);
makex25->lci = lci;
makex25->dest_addr = dest_addr;
makex25->source_addr = source_addr;
makex25->neighbour = nb;
makex25->facilities = facilities;
makex25->vc_facil_mask = x25_sk(sk)->vc_facil_mask;
[X25]: Selective sub-address matching with call user data. From: Shaun Pereira <spereira@tusc.com.au> This is the first (independent of the second) patch of two that I am working on with x25 on linux (tested with xot on a cisco router). Details are as follows. Current state of module: A server using the current implementation (2.6.11.7) of the x25 module will accept a call request/ incoming call packet at the listening x.25 address, from all callers to that address, as long as NO call user data is present in the packet header. If the server needs to choose to accept a particular call request/ incoming call packet arriving at its listening x25 address, then the kernel has to allow a match of call user data present in the call request packet with its own. This is required when multiple servers listen at the same x25 address and device interface. The kernel currently matches ALL call user data, if present. Current Changes: This patch is a follow up to the patch submitted previously by Andrew Hendry, and allows the user to selectively control the number of octets of call user data in the call request packet, that the kernel will match. By default no call user data is matched, even if call user data is present. To allow call user data matching, a cudmatchlength > 0 has to be passed into the kernel after which the passed number of octets will be matched. Otherwise the kernel behavior is exactly as the original implementation. This patch also ensures that as is normally the case, no call user data will be present in the Call accepted / call connected packet sent back to the caller Future Changes on next patch: There are cases however when call user data may be present in the call accepted packet. According to the X.25 recommendation (ITU-T 10/96) section 5.2.3.2 call user data may be present in the call accepted packet provided the fast select facility is used. My next patch will include this fast select utility and the ability to send up to 128 octets call user data in the call accepted packet provided the fast select facility is used. I am currently testing this, again with xot on linux and cisco. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> (With a fix from Alexey Dobriyan <adobriyan@gmail.com>) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-23 07:15:01 +02:00
/* ensure no reverse facil on accept */
makex25->vc_facil_mask &= ~X25_MASK_REVERSE;
makex25->cudmatchlength = x25_sk(sk)->cudmatchlength;
[X25]: Fast select with no restriction on response This patch is a follow up to patch 1 regarding "Selective Sub Address matching with call user data". It allows use of the Fast-Select-Acceptance optional user facility for X.25. This patch just implements fast select with no restriction on response (NRR). What this means (according to ITU-T Recomendation 10/96 section 6.16) is that if in an incoming call packet, the relevant facility bits are set for fast-select-NRR, then the called DTE can issue a direct response to the incoming packet using a call-accepted packet that contains call-user-data. This patch allows such a response. The called DTE can also respond with a clear-request packet that contains call-user-data. However, this feature is currently not implemented by the patch. How is Fast Select Acceptance used? By default, the system does not allow fast select acceptance (as before). To enable a response to fast select acceptance, After a listen socket in created and bound as follows socket(AF_X25, SOCK_SEQPACKET, 0); bind(call_soc, (struct sockaddr *)&locl_addr, sizeof(locl_addr)); but before a listen system call is made, the following ioctl should be used. ioctl(call_soc,SIOCX25CALLACCPTAPPRV); Now the listen system call can be made listen(call_soc, 4); After this, an incoming-call packet will be accepted, but no call-accepted packet will be sent back until the following system call is made on the socket that accepts the call ioctl(vc_soc,SIOCX25SENDCALLACCPT); The network (or cisco xot router used for testing here) will allow the application server's call-user-data in the call-accepted packet, provided the call-request was made with Fast-select NRR. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-23 07:16:17 +02:00
/* Normally all calls are accepted immediatly */
if(makex25->accptapprv & X25_DENY_ACCPT_APPRV) {
x25_write_internal(make, X25_CALL_ACCEPTED);
makex25->state = X25_STATE_3;
}
[X25]: Selective sub-address matching with call user data. From: Shaun Pereira <spereira@tusc.com.au> This is the first (independent of the second) patch of two that I am working on with x25 on linux (tested with xot on a cisco router). Details are as follows. Current state of module: A server using the current implementation (2.6.11.7) of the x25 module will accept a call request/ incoming call packet at the listening x.25 address, from all callers to that address, as long as NO call user data is present in the packet header. If the server needs to choose to accept a particular call request/ incoming call packet arriving at its listening x25 address, then the kernel has to allow a match of call user data present in the call request packet with its own. This is required when multiple servers listen at the same x25 address and device interface. The kernel currently matches ALL call user data, if present. Current Changes: This patch is a follow up to the patch submitted previously by Andrew Hendry, and allows the user to selectively control the number of octets of call user data in the call request packet, that the kernel will match. By default no call user data is matched, even if call user data is present. To allow call user data matching, a cudmatchlength > 0 has to be passed into the kernel after which the passed number of octets will be matched. Otherwise the kernel behavior is exactly as the original implementation. This patch also ensures that as is normally the case, no call user data will be present in the Call accepted / call connected packet sent back to the caller Future Changes on next patch: There are cases however when call user data may be present in the call accepted packet. According to the X.25 recommendation (ITU-T 10/96) section 5.2.3.2 call user data may be present in the call accepted packet provided the fast select facility is used. My next patch will include this fast select utility and the ability to send up to 128 octets call user data in the call accepted packet provided the fast select facility is used. I am currently testing this, again with xot on linux and cisco. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> (With a fix from Alexey Dobriyan <adobriyan@gmail.com>) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-23 07:15:01 +02:00
/*
* Incoming Call User Data.
*/
if (skb->len >= 0) {
memcpy(makex25->calluserdata.cuddata, skb->data, skb->len);
makex25->calluserdata.cudlength = skb->len;
}
sk->sk_ack_backlog++;
x25_insert_socket(make);
skb_queue_head(&sk->sk_receive_queue, skb);
x25_start_heartbeat(make);
if (!sock_flag(sk, SOCK_DEAD))
sk->sk_data_ready(sk, skb->len);
rc = 1;
sock_put(sk);
out:
return rc;
out_sock_put:
sock_put(sk);
out_clear_request:
rc = 0;
x25_transmit_clear_request(nb, lci, 0x01);
goto out;
}
static int x25_sendmsg(struct kiocb *iocb, struct socket *sock,
struct msghdr *msg, size_t len)
{
struct sock *sk = sock->sk;
struct x25_sock *x25 = x25_sk(sk);
struct sockaddr_x25 *usx25 = (struct sockaddr_x25 *)msg->msg_name;
struct sockaddr_x25 sx25;
struct sk_buff *skb;
unsigned char *asmptr;
int noblock = msg->msg_flags & MSG_DONTWAIT;
size_t size;
int qbit = 0, rc = -EINVAL;
if (msg->msg_flags & ~(MSG_DONTWAIT|MSG_OOB|MSG_EOR|MSG_CMSG_COMPAT))
goto out;
/* we currently don't support segmented records at the user interface */
if (!(msg->msg_flags & (MSG_EOR|MSG_OOB)))
goto out;
rc = -EADDRNOTAVAIL;
if (sock_flag(sk, SOCK_ZAPPED))
goto out;
rc = -EPIPE;
if (sk->sk_shutdown & SEND_SHUTDOWN) {
send_sig(SIGPIPE, current, 0);
goto out;
}
rc = -ENETUNREACH;
if (!x25->neighbour)
goto out;
if (usx25) {
rc = -EINVAL;
if (msg->msg_namelen < sizeof(sx25))
goto out;
memcpy(&sx25, usx25, sizeof(sx25));
rc = -EISCONN;
if (strcmp(x25->dest_addr.x25_addr, sx25.sx25_addr.x25_addr))
goto out;
rc = -EINVAL;
if (sx25.sx25_family != AF_X25)
goto out;
} else {
/*
* FIXME 1003.1g - if the socket is like this because
* it has become closed (not started closed) we ought
* to SIGPIPE, EPIPE;
*/
rc = -ENOTCONN;
if (sk->sk_state != TCP_ESTABLISHED)
goto out;
sx25.sx25_family = AF_X25;
sx25.sx25_addr = x25->dest_addr;
}
SOCK_DEBUG(sk, "x25_sendmsg: sendto: Addresses built.\n");
/* Build a packet */
SOCK_DEBUG(sk, "x25_sendmsg: sendto: building packet.\n");
if ((msg->msg_flags & MSG_OOB) && len > 32)
len = 32;
size = len + X25_MAX_L2_LEN + X25_EXT_MIN_LEN;
skb = sock_alloc_send_skb(sk, size, noblock, &rc);
if (!skb)
goto out;
X25_SKB_CB(skb)->flags = msg->msg_flags;
skb_reserve(skb, X25_MAX_L2_LEN + X25_EXT_MIN_LEN);
/*
* Put the data on the end
*/
SOCK_DEBUG(sk, "x25_sendmsg: Copying user data\n");
asmptr = skb->h.raw = skb_put(skb, len);
rc = memcpy_fromiovec(asmptr, msg->msg_iov, len);
if (rc)
goto out_kfree_skb;
/*
* If the Q BIT Include socket option is in force, the first
* byte of the user data is the logical value of the Q Bit.
*/
if (x25->qbitincl) {
qbit = skb->data[0];
skb_pull(skb, 1);
}
/*
* Push down the X.25 header
*/
SOCK_DEBUG(sk, "x25_sendmsg: Building X.25 Header.\n");
if (msg->msg_flags & MSG_OOB) {
if (x25->neighbour->extended) {
asmptr = skb_push(skb, X25_STD_MIN_LEN);
*asmptr++ = ((x25->lci >> 8) & 0x0F) | X25_GFI_EXTSEQ;
*asmptr++ = (x25->lci >> 0) & 0xFF;
*asmptr++ = X25_INTERRUPT;
} else {
asmptr = skb_push(skb, X25_STD_MIN_LEN);
*asmptr++ = ((x25->lci >> 8) & 0x0F) | X25_GFI_STDSEQ;
*asmptr++ = (x25->lci >> 0) & 0xFF;
*asmptr++ = X25_INTERRUPT;
}
} else {
if (x25->neighbour->extended) {
/* Build an Extended X.25 header */
asmptr = skb_push(skb, X25_EXT_MIN_LEN);
*asmptr++ = ((x25->lci >> 8) & 0x0F) | X25_GFI_EXTSEQ;
*asmptr++ = (x25->lci >> 0) & 0xFF;
*asmptr++ = X25_DATA;
*asmptr++ = X25_DATA;
} else {
/* Build an Standard X.25 header */
asmptr = skb_push(skb, X25_STD_MIN_LEN);
*asmptr++ = ((x25->lci >> 8) & 0x0F) | X25_GFI_STDSEQ;
*asmptr++ = (x25->lci >> 0) & 0xFF;
*asmptr++ = X25_DATA;
}
if (qbit)
skb->data[0] |= X25_Q_BIT;
}
SOCK_DEBUG(sk, "x25_sendmsg: Built header.\n");
SOCK_DEBUG(sk, "x25_sendmsg: Transmitting buffer\n");
rc = -ENOTCONN;
if (sk->sk_state != TCP_ESTABLISHED)
goto out_kfree_skb;
if (msg->msg_flags & MSG_OOB)
skb_queue_tail(&x25->interrupt_out_queue, skb);
else {
len = x25_output(sk, skb);
if (len < 0)
kfree_skb(skb);
else if (x25->qbitincl)
len++;
}
/*
* lock_sock() is currently only used to serialize this x25_kick()
* against input-driven x25_kick() calls. It currently only blocks
* incoming packets for this socket and does not protect against
* any other socket state changes and is not called from anywhere
* else. As x25_kick() cannot block and as long as all socket
* operations are BKL-wrapped, we don't need take to care about
* purging the backlog queue in x25_release().
*
* Using lock_sock() to protect all socket operations entirely
* (and making the whole x25 stack SMP aware) unfortunately would
* require major changes to {send,recv}msg and skb allocation methods.
* -> 2.5 ;)
*/
lock_sock(sk);
x25_kick(sk);
release_sock(sk);
rc = len;
out:
return rc;
out_kfree_skb:
kfree_skb(skb);
goto out;
}
static int x25_recvmsg(struct kiocb *iocb, struct socket *sock,
struct msghdr *msg, size_t size,
int flags)
{
struct sock *sk = sock->sk;
struct x25_sock *x25 = x25_sk(sk);
struct sockaddr_x25 *sx25 = (struct sockaddr_x25 *)msg->msg_name;
size_t copied;
int qbit;
struct sk_buff *skb;
unsigned char *asmptr;
int rc = -ENOTCONN;
/*
* This works for seqpacket too. The receiver has ordered the queue for
* us! We do one quick check first though
*/
if (sk->sk_state != TCP_ESTABLISHED)
goto out;
if (flags & MSG_OOB) {
rc = -EINVAL;
if (sock_flag(sk, SOCK_URGINLINE) ||
!skb_peek(&x25->interrupt_in_queue))
goto out;
skb = skb_dequeue(&x25->interrupt_in_queue);
skb_pull(skb, X25_STD_MIN_LEN);
/*
* No Q bit information on Interrupt data.
*/
if (x25->qbitincl) {
asmptr = skb_push(skb, 1);
*asmptr = 0x00;
}
msg->msg_flags |= MSG_OOB;
} else {
/* Now we can treat all alike */
skb = skb_recv_datagram(sk, flags & ~MSG_DONTWAIT,
flags & MSG_DONTWAIT, &rc);
if (!skb)
goto out;
qbit = (skb->data[0] & X25_Q_BIT) == X25_Q_BIT;
skb_pull(skb, x25->neighbour->extended ?
X25_EXT_MIN_LEN : X25_STD_MIN_LEN);
if (x25->qbitincl) {
asmptr = skb_push(skb, 1);
*asmptr = qbit;
}
}
skb->h.raw = skb->data;
copied = skb->len;
if (copied > size) {
copied = size;
msg->msg_flags |= MSG_TRUNC;
}
/* Currently, each datagram always contains a complete record */
msg->msg_flags |= MSG_EOR;
rc = skb_copy_datagram_iovec(skb, 0, msg->msg_iov, copied);
if (rc)
goto out_free_dgram;
if (sx25) {
sx25->sx25_family = AF_X25;
sx25->sx25_addr = x25->dest_addr;
}
msg->msg_namelen = sizeof(struct sockaddr_x25);
lock_sock(sk);
x25_check_rbuf(sk);
release_sock(sk);
rc = copied;
out_free_dgram:
skb_free_datagram(sk, skb);
out:
return rc;
}
static int x25_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
{
struct sock *sk = sock->sk;
struct x25_sock *x25 = x25_sk(sk);
void __user *argp = (void __user *)arg;
int rc;
switch (cmd) {
case TIOCOUTQ: {
int amount = sk->sk_sndbuf -
atomic_read(&sk->sk_wmem_alloc);
if (amount < 0)
amount = 0;
rc = put_user(amount, (unsigned int __user *)argp);
break;
}
case TIOCINQ: {
struct sk_buff *skb;
int amount = 0;
/*
* These two are safe on a single CPU system as
* only user tasks fiddle here
*/
if ((skb = skb_peek(&sk->sk_receive_queue)) != NULL)
amount = skb->len;
rc = put_user(amount, (unsigned int __user *)argp);
break;
}
case SIOCGSTAMP:
rc = -EINVAL;
if (sk)
rc = sock_get_timestamp(sk,
(struct timeval __user *)argp);
break;
case SIOCGIFADDR:
case SIOCSIFADDR:
case SIOCGIFDSTADDR:
case SIOCSIFDSTADDR:
case SIOCGIFBRDADDR:
case SIOCSIFBRDADDR:
case SIOCGIFNETMASK:
case SIOCSIFNETMASK:
case SIOCGIFMETRIC:
case SIOCSIFMETRIC:
rc = -EINVAL;
break;
case SIOCADDRT:
case SIOCDELRT:
rc = -EPERM;
if (!capable(CAP_NET_ADMIN))
break;
rc = x25_route_ioctl(cmd, argp);
break;
case SIOCX25GSUBSCRIP:
rc = x25_subscr_ioctl(cmd, argp);
break;
case SIOCX25SSUBSCRIP:
rc = -EPERM;
if (!capable(CAP_NET_ADMIN))
break;
rc = x25_subscr_ioctl(cmd, argp);
break;
case SIOCX25GFACILITIES: {
struct x25_facilities fac = x25->facilities;
rc = copy_to_user(argp, &fac,
sizeof(fac)) ? -EFAULT : 0;
break;
}
case SIOCX25SFACILITIES: {
struct x25_facilities facilities;
rc = -EFAULT;
if (copy_from_user(&facilities, argp,
sizeof(facilities)))
break;
rc = -EINVAL;
if (sk->sk_state != TCP_LISTEN &&
sk->sk_state != TCP_CLOSE)
break;
if (facilities.pacsize_in < X25_PS16 ||
facilities.pacsize_in > X25_PS4096)
break;
if (facilities.pacsize_out < X25_PS16 ||
facilities.pacsize_out > X25_PS4096)
break;
if (facilities.winsize_in < 1 ||
facilities.winsize_in > 127)
break;
if (facilities.throughput < 0x03 ||
facilities.throughput > 0xDD)
break;
[X25]: Fast select with no restriction on response This patch is a follow up to patch 1 regarding "Selective Sub Address matching with call user data". It allows use of the Fast-Select-Acceptance optional user facility for X.25. This patch just implements fast select with no restriction on response (NRR). What this means (according to ITU-T Recomendation 10/96 section 6.16) is that if in an incoming call packet, the relevant facility bits are set for fast-select-NRR, then the called DTE can issue a direct response to the incoming packet using a call-accepted packet that contains call-user-data. This patch allows such a response. The called DTE can also respond with a clear-request packet that contains call-user-data. However, this feature is currently not implemented by the patch. How is Fast Select Acceptance used? By default, the system does not allow fast select acceptance (as before). To enable a response to fast select acceptance, After a listen socket in created and bound as follows socket(AF_X25, SOCK_SEQPACKET, 0); bind(call_soc, (struct sockaddr *)&locl_addr, sizeof(locl_addr)); but before a listen system call is made, the following ioctl should be used. ioctl(call_soc,SIOCX25CALLACCPTAPPRV); Now the listen system call can be made listen(call_soc, 4); After this, an incoming-call packet will be accepted, but no call-accepted packet will be sent back until the following system call is made on the socket that accepts the call ioctl(vc_soc,SIOCX25SENDCALLACCPT); The network (or cisco xot router used for testing here) will allow the application server's call-user-data in the call-accepted packet, provided the call-request was made with Fast-select NRR. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-23 07:16:17 +02:00
if (facilities.reverse &&
(facilities.reverse | 0x81)!= 0x81)
break;
x25->facilities = facilities;
rc = 0;
break;
}
case SIOCX25GCALLUSERDATA: {
struct x25_calluserdata cud = x25->calluserdata;
rc = copy_to_user(argp, &cud,
sizeof(cud)) ? -EFAULT : 0;
break;
}
case SIOCX25SCALLUSERDATA: {
struct x25_calluserdata calluserdata;
rc = -EFAULT;
if (copy_from_user(&calluserdata, argp,
sizeof(calluserdata)))
break;
rc = -EINVAL;
if (calluserdata.cudlength > X25_MAX_CUD_LEN)
break;
x25->calluserdata = calluserdata;
rc = 0;
break;
}
case SIOCX25GCAUSEDIAG: {
struct x25_causediag causediag;
causediag = x25->causediag;
rc = copy_to_user(argp, &causediag,
sizeof(causediag)) ? -EFAULT : 0;
break;
}
[X25]: Selective sub-address matching with call user data. From: Shaun Pereira <spereira@tusc.com.au> This is the first (independent of the second) patch of two that I am working on with x25 on linux (tested with xot on a cisco router). Details are as follows. Current state of module: A server using the current implementation (2.6.11.7) of the x25 module will accept a call request/ incoming call packet at the listening x.25 address, from all callers to that address, as long as NO call user data is present in the packet header. If the server needs to choose to accept a particular call request/ incoming call packet arriving at its listening x25 address, then the kernel has to allow a match of call user data present in the call request packet with its own. This is required when multiple servers listen at the same x25 address and device interface. The kernel currently matches ALL call user data, if present. Current Changes: This patch is a follow up to the patch submitted previously by Andrew Hendry, and allows the user to selectively control the number of octets of call user data in the call request packet, that the kernel will match. By default no call user data is matched, even if call user data is present. To allow call user data matching, a cudmatchlength > 0 has to be passed into the kernel after which the passed number of octets will be matched. Otherwise the kernel behavior is exactly as the original implementation. This patch also ensures that as is normally the case, no call user data will be present in the Call accepted / call connected packet sent back to the caller Future Changes on next patch: There are cases however when call user data may be present in the call accepted packet. According to the X.25 recommendation (ITU-T 10/96) section 5.2.3.2 call user data may be present in the call accepted packet provided the fast select facility is used. My next patch will include this fast select utility and the ability to send up to 128 octets call user data in the call accepted packet provided the fast select facility is used. I am currently testing this, again with xot on linux and cisco. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> (With a fix from Alexey Dobriyan <adobriyan@gmail.com>) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-23 07:15:01 +02:00
case SIOCX25SCUDMATCHLEN: {
struct x25_subaddr sub_addr;
rc = -EINVAL;
if(sk->sk_state != TCP_CLOSE)
break;
rc = -EFAULT;
if (copy_from_user(&sub_addr, argp,
sizeof(sub_addr)))
break;
rc = -EINVAL;
if(sub_addr.cudmatchlength > X25_MAX_CUD_LEN)
break;
x25->cudmatchlength = sub_addr.cudmatchlength;
rc = 0;
break;
}
[X25]: Fast select with no restriction on response This patch is a follow up to patch 1 regarding "Selective Sub Address matching with call user data". It allows use of the Fast-Select-Acceptance optional user facility for X.25. This patch just implements fast select with no restriction on response (NRR). What this means (according to ITU-T Recomendation 10/96 section 6.16) is that if in an incoming call packet, the relevant facility bits are set for fast-select-NRR, then the called DTE can issue a direct response to the incoming packet using a call-accepted packet that contains call-user-data. This patch allows such a response. The called DTE can also respond with a clear-request packet that contains call-user-data. However, this feature is currently not implemented by the patch. How is Fast Select Acceptance used? By default, the system does not allow fast select acceptance (as before). To enable a response to fast select acceptance, After a listen socket in created and bound as follows socket(AF_X25, SOCK_SEQPACKET, 0); bind(call_soc, (struct sockaddr *)&locl_addr, sizeof(locl_addr)); but before a listen system call is made, the following ioctl should be used. ioctl(call_soc,SIOCX25CALLACCPTAPPRV); Now the listen system call can be made listen(call_soc, 4); After this, an incoming-call packet will be accepted, but no call-accepted packet will be sent back until the following system call is made on the socket that accepts the call ioctl(vc_soc,SIOCX25SENDCALLACCPT); The network (or cisco xot router used for testing here) will allow the application server's call-user-data in the call-accepted packet, provided the call-request was made with Fast-select NRR. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-23 07:16:17 +02:00
case SIOCX25CALLACCPTAPPRV: {
rc = -EINVAL;
if (sk->sk_state != TCP_CLOSE)
break;
x25->accptapprv = X25_ALLOW_ACCPT_APPRV;
rc = 0;
break;
}
case SIOCX25SENDCALLACCPT: {
rc = -EINVAL;
if (sk->sk_state != TCP_ESTABLISHED)
break;
if (x25->accptapprv) /* must call accptapprv above */
break;
x25_write_internal(sk, X25_CALL_ACCEPTED);
x25->state = X25_STATE_3;
rc = 0;
break;
}
default:
rc = -ENOIOCTLCMD;
break;
}
return rc;
}
static struct net_proto_family x25_family_ops = {
.family = AF_X25,
.create = x25_create,
.owner = THIS_MODULE,
};
static const struct proto_ops SOCKOPS_WRAPPED(x25_proto_ops) = {
.family = AF_X25,
.owner = THIS_MODULE,
.release = x25_release,
.bind = x25_bind,
.connect = x25_connect,
.socketpair = sock_no_socketpair,
.accept = x25_accept,
.getname = x25_getname,
.poll = datagram_poll,
.ioctl = x25_ioctl,
.listen = x25_listen,
.shutdown = sock_no_shutdown,
.setsockopt = x25_setsockopt,
.getsockopt = x25_getsockopt,
.sendmsg = x25_sendmsg,
.recvmsg = x25_recvmsg,
.mmap = sock_no_mmap,
.sendpage = sock_no_sendpage,
};
#include <linux/smp_lock.h>
SOCKOPS_WRAP(x25_proto, AF_X25);
static struct packet_type x25_packet_type = {
.type = __constant_htons(ETH_P_X25),
.func = x25_lapb_receive_frame,
};
static struct notifier_block x25_dev_notifier = {
.notifier_call = x25_device_event,
};
void x25_kill_by_neigh(struct x25_neigh *nb)
{
struct sock *s;
struct hlist_node *node;
write_lock_bh(&x25_list_lock);
sk_for_each(s, node, &x25_list)
if (x25_sk(s)->neighbour == nb)
x25_disconnect(s, ENETUNREACH, 0, 0);
write_unlock_bh(&x25_list_lock);
}
static int __init x25_init(void)
{
int rc = proto_register(&x25_proto, 0);
if (rc != 0)
goto out;
sock_register(&x25_family_ops);
dev_add_pack(&x25_packet_type);
register_netdevice_notifier(&x25_dev_notifier);
printk(KERN_INFO "X.25 for Linux. Version 0.2 for Linux 2.1.15\n");
#ifdef CONFIG_SYSCTL
x25_register_sysctl();
#endif
x25_proc_init();
out:
return rc;
}
module_init(x25_init);
static void __exit x25_exit(void)
{
x25_proc_exit();
x25_link_free();
x25_route_free();
#ifdef CONFIG_SYSCTL
x25_unregister_sysctl();
#endif
unregister_netdevice_notifier(&x25_dev_notifier);
dev_remove_pack(&x25_packet_type);
sock_unregister(AF_X25);
proto_unregister(&x25_proto);
}
module_exit(x25_exit);
MODULE_AUTHOR("Jonathan Naylor <g4klx@g4klx.demon.co.uk>");
MODULE_DESCRIPTION("The X.25 Packet Layer network layer protocol");
MODULE_LICENSE("GPL");
MODULE_ALIAS_NETPROTO(PF_X25);