OpenE2K/linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
af9e076536
linux/include/asm-i386/smp.h

115 lines
2.5 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
#ifndef __ASM_SMP_H
#define __ASM_SMP_H
/*
* We need the APIC definitions automatically as part of 'smp.h'
*/
#ifndef __ASSEMBLY__
#include <linux/kernel.h>
#include <linux/threads.h>
#include <linux/cpumask.h>
#endif
#ifdef CONFIG_X86_LOCAL_APIC
#ifndef __ASSEMBLY__
#include <asm/fixmap.h>
#include <asm/bitops.h>
#include <asm/mpspec.h>
#ifdef CONFIG_X86_IO_APIC
#include <asm/io_apic.h>
#endif
#include <asm/apic.h>
#endif
#endif
#define BAD_APICID 0xFFu
#ifdef CONFIG_SMP
#ifndef __ASSEMBLY__
/*
* Private routines/data
*/
extern void smp_alloc_memory(void);
extern int pic_mode;
extern int smp_num_siblings;
extern cpumask_t cpu_sibling_map[];
[PATCH] x86_64: add support for Intel dual-core detection and displaying Appended patch adds the support for Intel dual-core detection and displaying the core related information in /proc/cpuinfo. It adds two new fields "core id" and "cpu cores" to x86 /proc/cpuinfo and the "core id" field for x86_64("cpu cores" field is already present in x86_64). Number of processor cores in a die is detected using cpuid(4) and this is documented in IA-32 Intel Architecture Software Developer's Manual (vol 2a) (http://developer.intel.com/design/pentium4/manuals/index_new.htm#sdm_vol2a) This patch also adds cpu_core_map similar to cpu_sibling_map. Slightly hacked by AK. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-17 00:25:15 +02:00
extern cpumask_t cpu_core_map[];
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
extern void (*mtrr_hook) (void);
extern void zap_low_mappings (void);
[PATCH] sep initializing rework Make SEP init per-cpu, so it is hotplug safe. Signed-off-by: Li Shaohua<shaohua.li@intel.com> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 23:54:53 +02:00
extern void lock_ipi_call_lock(void);
extern void unlock_ipi_call_lock(void);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
#define MAX_APICID 256
extern u8 x86_cpu_to_apicid[];
[PATCH] PCI: Change MSI to use physical delivery mode always MSI hardcoded delivery mode to use logical delivery mode. Recently x86_64 moved to use physical mode addressing to support physflat mode. With this mode enabled noticed that my eth with MSI werent working. msi_address_init() was hardcoded to use logical mode for i386 and x86_64. So when we switch to use physical mode, things stopped working. Since anyway we dont use lowest priority delivery with MSI, its always directed to just a single CPU. Its safe and simpler to use physical mode always, even when we use logical delivery mode for IPI's or other ioapic RTE's. Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-09 06:42:33 +01:00
#define cpu_physical_id(cpu) x86_cpu_to_apicid[cpu]
[PATCH] cpu state clean after hot remove Clean CPU states in order to reuse smp boot code for CPU hotplug. Signed-off-by: Li Shaohua<shaohua.li@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 23:54:56 +02:00
#ifdef CONFIG_HOTPLUG_CPU
extern void cpu_exit_clear(void);
extern void cpu_uninit(void);
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
/*
* This function is needed by all SMP systems. It must _always_ be valid
* from the initial startup. We map APIC_BASE very early in page_setup(),
* so this is correct in the x86 case.
*/
[PATCH] smp_processor_id() cleanup This patch implements a number of smp_processor_id() cleanup ideas that Arjan van de Ven and I came up with. The previous __smp_processor_id/_smp_processor_id/smp_processor_id API spaghetti was hard to follow both on the implementational and on the usage side. Some of the complexity arose from picking wrong names, some of the complexity comes from the fact that not all architectures defined __smp_processor_id. In the new code, there are two externally visible symbols: - smp_processor_id(): debug variant. - raw_smp_processor_id(): nondebug variant. Replaces all existing uses of _smp_processor_id() and __smp_processor_id(). Defined by every SMP architecture in include/asm-*/smp.h. There is one new internal symbol, dependent on DEBUG_PREEMPT: - debug_smp_processor_id(): internal debug variant, mapped to smp_processor_id(). Also, i moved debug_smp_processor_id() from lib/kernel_lock.c into a new lib/smp_processor_id.c file. All related comments got updated and/or clarified. I have build/boot tested the following 8 .config combinations on x86: {SMP,UP} x {PREEMPT,!PREEMPT} x {DEBUG_PREEMPT,!DEBUG_PREEMPT} I have also build/boot tested x64 on UP/PREEMPT/DEBUG_PREEMPT. (Other architectures are untested, but should work just fine.) Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-22 02:14:34 +02:00
#define raw_smp_processor_id() (current_thread_info()->cpu)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
extern cpumask_t cpu_callout_map;
extern cpumask_t cpu_callin_map;
[PATCH] i386 boottime for_each_cpu broken for_each_cpu walks through all processors in cpu_possible_map, which is defined as cpu_callout_map on i386 and isn't initialised until all processors have been booted. This breaks things which do for_each_cpu iterations early during boot. So, define cpu_possible_map as a bitmap with NR_CPUS bits populated. This was triggered by a patch i'm working on which does alloc_percpu before bringing up secondary processors. From: Alexander Nyberg <alexn@telia.com> i386-boottime-for_each_cpu-broken.patch i386-boottime-for_each_cpu-broken-fix.patch The SMP version of __alloc_percpu checks the cpu_possible_map before allocating memory for a certain cpu. With the above patches the BSP cpuid is never set in cpu_possible_map which breaks CONFIG_SMP on uniprocessor machines (as soon as someone tries to dereference something allocated via __alloc_percpu, which in fact is never allocated since the cpu is not set in cpu_possible_map). Signed-off-by: Zwane Mwaikambo <zwane@arm.linux.org.uk> Signed-off-by: Alexander Nyberg <alexn@telia.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-04 00:56:51 +02:00
extern cpumask_t cpu_possible_map;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
/* We don't mark CPUs online until __cpu_up(), so we need another measure */
static inline int num_booting_cpus(void)
{
return cpus_weight(cpu_callout_map);
}
#ifdef CONFIG_X86_LOCAL_APIC
#ifdef APIC_DEFINITION
extern int hard_smp_processor_id(void);
#else
#include <mach_apicdef.h>
static inline int hard_smp_processor_id(void)
{
/* we don't want to mark this access volatile - bad code generation */
return GET_APIC_ID(*(unsigned long *)(APIC_BASE+APIC_ID));
}
#endif
#endif
[PATCH] i386 CPU hotplug (The i386 CPU hotplug patch provides infrastructure for some work which Pavel is doing as well as for ACPI S3 (suspend-to-RAM) work which Li Shaohua <shaohua.li@intel.com> is doing) The following provides i386 architecture support for safely unregistering and registering processors during runtime, updated for the current -mm tree. In order to avoid dumping cpu hotplug code into kernel/irq/* i dropped the cpu_online check in do_IRQ() by modifying fixup_irqs(). The difference being that on cpu offline, fixup_irqs() is called before we clear the cpu from cpu_online_map and a long delay in order to ensure that we never have any queued external interrupts on the APICs. There are additional changes to s390 and ppc64 to account for this change. 1) Add CONFIG_HOTPLUG_CPU 2) disable local APIC timer on dead cpus. 3) Disable preempt around irq balancing to prevent CPUs going down. 4) Print irq stats for all possible cpus. 5) Debugging check for interrupts on offline cpus. 6) Hacky fixup_irqs() to redirect irqs when cpus go off/online. 7) play_dead() for offline cpus to spin inside. 8) Handle offline cpus set in flush_tlb_others(). 9) Grab lock earlier in smp_call_function() to prevent CPUs going down. 10) Implement __cpu_disable() and __cpu_die(). 11) Enable local interrupts in cpu_enable() after fixup_irqs() 12) Don't fiddle with NMI on dead cpu, but leave intact on other cpus. 13) Program IRQ affinity whilst cpu is still in cpu_online_map on offline. Signed-off-by: Zwane Mwaikambo <zwane@linuxpower.ca> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 23:54:50 +02:00
[PATCH] stack overflow safe kdump: safe_smp_processor_id() This is a the first of a series of patch-sets aiming at making kdump more robust against stack overflows. This patch set does the following: * Add safe_smp_processor_id function to i386 architecture (this function was inspired by the x86_64 function of the same name). * Substitute "smp_processor_id" with the stack overflow-safe "safe_smp_processor_id" in the reboot path to the second kernel. This patch: On the event of a stack overflow critical data that usually resides at the bottom of the stack is likely to be stomped and, consequently, its use should be avoided. In particular, in the i386 and IA64 architectures the macro smp_processor_id ultimately makes use of the "cpu" member of struct thread_info which resides at the bottom of the stack. x86_64, on the other hand, is not affected by this problem because it benefits from the use of the PDA infrastructure. To circumvent this problem I suggest implementing "safe_smp_processor_id()" (it already exists in x86_64) for i386 and IA64 and use it as a replacement for smp_processor_id in the reboot path to the dump capture kernel. This is a possible implementation for i386. Signed-off-by: Fernando Vazquez <fernando@intellilink.co.jp> Looks-reasonable-to: Andi Kleen <ak@muc.de> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 08:29:07 +02:00
extern int safe_smp_processor_id(void);
[PATCH] i386 CPU hotplug (The i386 CPU hotplug patch provides infrastructure for some work which Pavel is doing as well as for ACPI S3 (suspend-to-RAM) work which Li Shaohua <shaohua.li@intel.com> is doing) The following provides i386 architecture support for safely unregistering and registering processors during runtime, updated for the current -mm tree. In order to avoid dumping cpu hotplug code into kernel/irq/* i dropped the cpu_online check in do_IRQ() by modifying fixup_irqs(). The difference being that on cpu offline, fixup_irqs() is called before we clear the cpu from cpu_online_map and a long delay in order to ensure that we never have any queued external interrupts on the APICs. There are additional changes to s390 and ppc64 to account for this change. 1) Add CONFIG_HOTPLUG_CPU 2) disable local APIC timer on dead cpus. 3) Disable preempt around irq balancing to prevent CPUs going down. 4) Print irq stats for all possible cpus. 5) Debugging check for interrupts on offline cpus. 6) Hacky fixup_irqs() to redirect irqs when cpus go off/online. 7) play_dead() for offline cpus to spin inside. 8) Handle offline cpus set in flush_tlb_others(). 9) Grab lock earlier in smp_call_function() to prevent CPUs going down. 10) Implement __cpu_disable() and __cpu_die(). 11) Enable local interrupts in cpu_enable() after fixup_irqs() 12) Don't fiddle with NMI on dead cpu, but leave intact on other cpus. 13) Program IRQ affinity whilst cpu is still in cpu_online_map on offline. Signed-off-by: Zwane Mwaikambo <zwane@linuxpower.ca> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 23:54:50 +02:00
extern int __cpu_disable(void);
extern void __cpu_die(unsigned int cpu);
[PATCH] i386: Support physical cpu hotplug for x86_64 This patch enables ACPI based physical CPU hotplug support for x86_64. Implements acpi_map_lsapic() and acpi_unmap_lsapic() to support physical cpu hotplug. Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@muc.de> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org>
2006-09-26 10:52:35 +02:00
extern unsigned int num_processors;
[PATCH] i386: Allow to use GENERICARCH for UP kernels There are some machines around (large xSeries or Unisys ES7000) that need physical IO-APIC destination mode to access all of their IO devices. This currently doesn't work in UP kernels as used in distribution installers. This patch allows to compile even UP kernels as GENERICARCH which allows to use physical or clustered APIC mode. Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:26 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
#endif /* !__ASSEMBLY__ */
[PATCH] PCI: Change MSI to use physical delivery mode always MSI hardcoded delivery mode to use logical delivery mode. Recently x86_64 moved to use physical mode addressing to support physflat mode. With this mode enabled noticed that my eth with MSI werent working. msi_address_init() was hardcoded to use logical mode for i386 and x86_64. So when we switch to use physical mode, things stopped working. Since anyway we dont use lowest priority delivery with MSI, its always directed to just a single CPU. Its safe and simpler to use physical mode always, even when we use logical delivery mode for IPI's or other ioapic RTE's. Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-09 06:42:33 +01:00
#else /* CONFIG_SMP */
[PATCH] stack overflow safe kdump: safe_smp_processor_id() This is a the first of a series of patch-sets aiming at making kdump more robust against stack overflows. This patch set does the following: * Add safe_smp_processor_id function to i386 architecture (this function was inspired by the x86_64 function of the same name). * Substitute "smp_processor_id" with the stack overflow-safe "safe_smp_processor_id" in the reboot path to the second kernel. This patch: On the event of a stack overflow critical data that usually resides at the bottom of the stack is likely to be stomped and, consequently, its use should be avoided. In particular, in the i386 and IA64 architectures the macro smp_processor_id ultimately makes use of the "cpu" member of struct thread_info which resides at the bottom of the stack. x86_64, on the other hand, is not affected by this problem because it benefits from the use of the PDA infrastructure. To circumvent this problem I suggest implementing "safe_smp_processor_id()" (it already exists in x86_64) for i386 and IA64 and use it as a replacement for smp_processor_id in the reboot path to the dump capture kernel. This is a possible implementation for i386. Signed-off-by: Fernando Vazquez <fernando@intellilink.co.jp> Looks-reasonable-to: Andi Kleen <ak@muc.de> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 08:29:07 +02:00
#define safe_smp_processor_id() 0
[PATCH] PCI: Change MSI to use physical delivery mode always MSI hardcoded delivery mode to use logical delivery mode. Recently x86_64 moved to use physical mode addressing to support physflat mode. With this mode enabled noticed that my eth with MSI werent working. msi_address_init() was hardcoded to use logical mode for i386 and x86_64. So when we switch to use physical mode, things stopped working. Since anyway we dont use lowest priority delivery with MSI, its always directed to just a single CPU. Its safe and simpler to use physical mode always, even when we use logical delivery mode for IPI's or other ioapic RTE's. Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-09 06:42:33 +01:00
#define cpu_physical_id(cpu) boot_cpu_physical_apicid
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
#define NO_PROC_ID 0xFF /* No processor magic marker */
#endif
[PATCH] i386: Allow to use GENERICARCH for UP kernels There are some machines around (large xSeries or Unisys ES7000) that need physical IO-APIC destination mode to access all of their IO devices. This currently doesn't work in UP kernels as used in distribution installers. This patch allows to compile even UP kernels as GENERICARCH which allows to use physical or clustered APIC mode. Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:26 +02:00
#ifndef __ASSEMBLY__
[PATCH] make kernels with CONFIG_X86_GENERIC and !CONFIG_SMP compilable CONFIG_X86_GENERIC is not exclusively CONFIG_SMP, as mach-default/ could be compiled also for UP archs. The patch fixes compilation error in include/asm/mach-summit/mach_apic.h in case CONFIG_X86_GENERIC && !CONFIG_SMP Signed-off-by: Jiri Kosina <jikos@jikos.cz> Acked-by: Keith Mannthey <kmannth@us.ibm.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06 11:11:56 +02:00
extern u8 apicid_2_node[];
[PATCH] i386: Allow to use GENERICARCH for UP kernels There are some machines around (large xSeries or Unisys ES7000) that need physical IO-APIC destination mode to access all of their IO devices. This currently doesn't work in UP kernels as used in distribution installers. This patch allows to compile even UP kernels as GENERICARCH which allows to use physical or clustered APIC mode. Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:26 +02:00
#ifdef CONFIG_X86_LOCAL_APIC
static __inline int logical_smp_processor_id(void)
{
/* we don't want to mark this access volatile - bad code generation */
return GET_APIC_LOGICAL_ID(*(unsigned long *)(APIC_BASE+APIC_LDR));
}
#endif
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
#endif
Reference in New Issue Copy Permalink