OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
linux/arch/arm/kernel/calls.S

372 lines
10 KiB
ArmAsm
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
/*
* linux/arch/arm/kernel/calls.S
*
* Copyright (C) 1995-2005 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
[ARM] safer handling of syscall table padding ARM entry-common.S needs to know syscall table size; in itself that would not be a problem, but there's an additional constraint - some of the instructions using it want a constant that would be a multiple of 4. So we have to pad syscall table with sys_ni_syscall and that's where the trouble begins. .rept pseudo-op wants a constant expression for number of repetitions and subtraction of two labels (before and after syscall table) doesn't always get simplified to constant early enough for .rept. If labels end up in different frags, we lose. And while the frag size is large enough (slightly below 4Kb), the syscall table is about 1/3 of that. We used to get away with that, but the recent changes had been enough to trigger the breakage. Proper fix is simple: have a macro (CALL(x)) to populate the table instead of using explicit .long x and the first time we include calls.S have it defined to .equ NR_syscalls,NR_syscalls+1. Then we can find the proper amount of padding on the first inclusion simply by looking at NR_syscalls at that time. And that will be constant, no matter what. Moreover, the same trick kills the need of having an estimate of padded NR_syscalls - it will be calculated for free at the same time. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 13:57:01 +01:00
* This file is included thrice in entry-common.S
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
*/
[ARM] safer handling of syscall table padding ARM entry-common.S needs to know syscall table size; in itself that would not be a problem, but there's an additional constraint - some of the instructions using it want a constant that would be a multiple of 4. So we have to pad syscall table with sys_ni_syscall and that's where the trouble begins. .rept pseudo-op wants a constant expression for number of repetitions and subtraction of two labels (before and after syscall table) doesn't always get simplified to constant early enough for .rept. If labels end up in different frags, we lose. And while the frag size is large enough (slightly below 4Kb), the syscall table is about 1/3 of that. We used to get away with that, but the recent changes had been enough to trigger the breakage. Proper fix is simple: have a macro (CALL(x)) to populate the table instead of using explicit .long x and the first time we include calls.S have it defined to .equ NR_syscalls,NR_syscalls+1. Then we can find the proper amount of padding on the first inclusion simply by looking at NR_syscalls at that time. And that will be constant, no matter what. Moreover, the same trick kills the need of having an estimate of padded NR_syscalls - it will be calculated for free at the same time. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 13:57:01 +01:00
/* 0 */ CALL(sys_restart_syscall)
CALL(sys_exit)
CALL(sys_fork_wrapper)
CALL(sys_read)
CALL(sys_write)
/* 5 */ CALL(sys_open)
CALL(sys_close)
CALL(sys_ni_syscall) /* was sys_waitpid */
CALL(sys_creat)
CALL(sys_link)
/* 10 */ CALL(sys_unlink)
CALL(sys_execve_wrapper)
CALL(sys_chdir)
CALL(OBSOLETE(sys_time)) /* used by libc4 */
CALL(sys_mknod)
/* 15 */ CALL(sys_chmod)
CALL(sys_lchown16)
CALL(sys_ni_syscall) /* was sys_break */
CALL(sys_ni_syscall) /* was sys_stat */
CALL(sys_lseek)
/* 20 */ CALL(sys_getpid)
CALL(sys_mount)
CALL(OBSOLETE(sys_oldumount)) /* used by libc4 */
CALL(sys_setuid16)
CALL(sys_getuid16)
/* 25 */ CALL(OBSOLETE(sys_stime))
CALL(sys_ptrace)
CALL(OBSOLETE(sys_alarm)) /* used by libc4 */
CALL(sys_ni_syscall) /* was sys_fstat */
CALL(sys_pause)
/* 30 */ CALL(OBSOLETE(sys_utime)) /* used by libc4 */
CALL(sys_ni_syscall) /* was sys_stty */
CALL(sys_ni_syscall) /* was sys_getty */
CALL(sys_access)
CALL(sys_nice)
/* 35 */ CALL(sys_ni_syscall) /* was sys_ftime */
CALL(sys_sync)
CALL(sys_kill)
CALL(sys_rename)
CALL(sys_mkdir)
/* 40 */ CALL(sys_rmdir)
CALL(sys_dup)
CALL(sys_pipe)
CALL(sys_times)
CALL(sys_ni_syscall) /* was sys_prof */
/* 45 */ CALL(sys_brk)
CALL(sys_setgid16)
CALL(sys_getgid16)
CALL(sys_ni_syscall) /* was sys_signal */
CALL(sys_geteuid16)
/* 50 */ CALL(sys_getegid16)
CALL(sys_acct)
CALL(sys_umount)
CALL(sys_ni_syscall) /* was sys_lock */
CALL(sys_ioctl)
/* 55 */ CALL(sys_fcntl)
CALL(sys_ni_syscall) /* was sys_mpx */
CALL(sys_setpgid)
CALL(sys_ni_syscall) /* was sys_ulimit */
CALL(sys_ni_syscall) /* was sys_olduname */
/* 60 */ CALL(sys_umask)
CALL(sys_chroot)
CALL(sys_ustat)
CALL(sys_dup2)
CALL(sys_getppid)
/* 65 */ CALL(sys_getpgrp)
CALL(sys_setsid)
CALL(sys_sigaction)
CALL(sys_ni_syscall) /* was sys_sgetmask */
CALL(sys_ni_syscall) /* was sys_ssetmask */
/* 70 */ CALL(sys_setreuid16)
CALL(sys_setregid16)
CALL(sys_sigsuspend_wrapper)
CALL(sys_sigpending)
CALL(sys_sethostname)
/* 75 */ CALL(sys_setrlimit)
CALL(OBSOLETE(sys_old_getrlimit)) /* used by libc4 */
CALL(sys_getrusage)
CALL(sys_gettimeofday)
CALL(sys_settimeofday)
/* 80 */ CALL(sys_getgroups16)
CALL(sys_setgroups16)
CALL(OBSOLETE(old_select)) /* used by libc4 */
CALL(sys_symlink)
CALL(sys_ni_syscall) /* was sys_lstat */
/* 85 */ CALL(sys_readlink)
CALL(sys_uselib)
CALL(sys_swapon)
CALL(sys_reboot)
CALL(OBSOLETE(old_readdir)) /* used by libc4 */
/* 90 */ CALL(OBSOLETE(old_mmap)) /* used by libc4 */
CALL(sys_munmap)
CALL(sys_truncate)
CALL(sys_ftruncate)
CALL(sys_fchmod)
/* 95 */ CALL(sys_fchown16)
CALL(sys_getpriority)
CALL(sys_setpriority)
CALL(sys_ni_syscall) /* was sys_profil */
CALL(sys_statfs)
/* 100 */ CALL(sys_fstatfs)
[ARM] Add more syscalls Add: sys_unshare sys_set_robust_list sys_get_robust_list sys_splice sys_arm_sync_file_range sys_tee sys_vmsplice sys_move_pages sys_getcpu Special note about sys_arm_sync_file_range(), which is implemented as: asmlinkage long sys_arm_sync_file_range(int fd, unsigned int flags, loff_t offset, loff_t nbytes) { return sys_sync_file_range(fd, offset, nbytes, flags); } We can't export sys_sync_file_range() directly on ARM because the argument list someone picked does not fit in the available registers. Would be nice if... there was an arch maintainer review mechanism for new syscalls before they hit the kernel. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-17 19:23:10 +01:00
CALL(sys_ni_syscall) /* sys_ioperm */
[ARM] 3338/1: old ABI compat: sys_socketcall Patch from Nicolas Pitre Commit 99595d0237926b5aba1fe4c844a011a1ba1ee1f8 forgot to intercept sys_socketcall as well. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-16 23:36:13 +01:00
CALL(OBSOLETE(ABI(sys_socketcall, sys_oabi_socketcall)))
[ARM] safer handling of syscall table padding ARM entry-common.S needs to know syscall table size; in itself that would not be a problem, but there's an additional constraint - some of the instructions using it want a constant that would be a multiple of 4. So we have to pad syscall table with sys_ni_syscall and that's where the trouble begins. .rept pseudo-op wants a constant expression for number of repetitions and subtraction of two labels (before and after syscall table) doesn't always get simplified to constant early enough for .rept. If labels end up in different frags, we lose. And while the frag size is large enough (slightly below 4Kb), the syscall table is about 1/3 of that. We used to get away with that, but the recent changes had been enough to trigger the breakage. Proper fix is simple: have a macro (CALL(x)) to populate the table instead of using explicit .long x and the first time we include calls.S have it defined to .equ NR_syscalls,NR_syscalls+1. Then we can find the proper amount of padding on the first inclusion simply by looking at NR_syscalls at that time. And that will be constant, no matter what. Moreover, the same trick kills the need of having an estimate of padded NR_syscalls - it will be calculated for free at the same time. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 13:57:01 +01:00
CALL(sys_syslog)
CALL(sys_setitimer)
/* 105 */ CALL(sys_getitimer)
CALL(sys_newstat)
CALL(sys_newlstat)
CALL(sys_newfstat)
CALL(sys_ni_syscall) /* was sys_uname */
/* 110 */ CALL(sys_ni_syscall) /* was sys_iopl */
CALL(sys_vhangup)
CALL(sys_ni_syscall)
CALL(OBSOLETE(sys_syscall)) /* call a syscall */
CALL(sys_wait4)
/* 115 */ CALL(sys_swapoff)
CALL(sys_sysinfo)
CALL(OBSOLETE(ABI(sys_ipc, sys_oabi_ipc)))
CALL(sys_fsync)
CALL(sys_sigreturn_wrapper)
/* 120 */ CALL(sys_clone_wrapper)
CALL(sys_setdomainname)
CALL(sys_newuname)
[ARM] Add more syscalls Add: sys_unshare sys_set_robust_list sys_get_robust_list sys_splice sys_arm_sync_file_range sys_tee sys_vmsplice sys_move_pages sys_getcpu Special note about sys_arm_sync_file_range(), which is implemented as: asmlinkage long sys_arm_sync_file_range(int fd, unsigned int flags, loff_t offset, loff_t nbytes) { return sys_sync_file_range(fd, offset, nbytes, flags); } We can't export sys_sync_file_range() directly on ARM because the argument list someone picked does not fit in the available registers. Would be nice if... there was an arch maintainer review mechanism for new syscalls before they hit the kernel. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-17 19:23:10 +01:00
CALL(sys_ni_syscall) /* modify_ldt */
[ARM] safer handling of syscall table padding ARM entry-common.S needs to know syscall table size; in itself that would not be a problem, but there's an additional constraint - some of the instructions using it want a constant that would be a multiple of 4. So we have to pad syscall table with sys_ni_syscall and that's where the trouble begins. .rept pseudo-op wants a constant expression for number of repetitions and subtraction of two labels (before and after syscall table) doesn't always get simplified to constant early enough for .rept. If labels end up in different frags, we lose. And while the frag size is large enough (slightly below 4Kb), the syscall table is about 1/3 of that. We used to get away with that, but the recent changes had been enough to trigger the breakage. Proper fix is simple: have a macro (CALL(x)) to populate the table instead of using explicit .long x and the first time we include calls.S have it defined to .equ NR_syscalls,NR_syscalls+1. Then we can find the proper amount of padding on the first inclusion simply by looking at NR_syscalls at that time. And that will be constant, no matter what. Moreover, the same trick kills the need of having an estimate of padded NR_syscalls - it will be calculated for free at the same time. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 13:57:01 +01:00
CALL(sys_adjtimex)
/* 125 */ CALL(sys_mprotect)
CALL(sys_sigprocmask)
CALL(sys_ni_syscall) /* was sys_create_module */
CALL(sys_init_module)
CALL(sys_delete_module)
/* 130 */ CALL(sys_ni_syscall) /* was sys_get_kernel_syms */
CALL(sys_quotactl)
CALL(sys_getpgid)
CALL(sys_fchdir)
CALL(sys_bdflush)
/* 135 */ CALL(sys_sysfs)
CALL(sys_personality)
[ARM] Add more syscalls Add: sys_unshare sys_set_robust_list sys_get_robust_list sys_splice sys_arm_sync_file_range sys_tee sys_vmsplice sys_move_pages sys_getcpu Special note about sys_arm_sync_file_range(), which is implemented as: asmlinkage long sys_arm_sync_file_range(int fd, unsigned int flags, loff_t offset, loff_t nbytes) { return sys_sync_file_range(fd, offset, nbytes, flags); } We can't export sys_sync_file_range() directly on ARM because the argument list someone picked does not fit in the available registers. Would be nice if... there was an arch maintainer review mechanism for new syscalls before they hit the kernel. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-17 19:23:10 +01:00
CALL(sys_ni_syscall) /* reserved for afs_syscall */
[ARM] safer handling of syscall table padding ARM entry-common.S needs to know syscall table size; in itself that would not be a problem, but there's an additional constraint - some of the instructions using it want a constant that would be a multiple of 4. So we have to pad syscall table with sys_ni_syscall and that's where the trouble begins. .rept pseudo-op wants a constant expression for number of repetitions and subtraction of two labels (before and after syscall table) doesn't always get simplified to constant early enough for .rept. If labels end up in different frags, we lose. And while the frag size is large enough (slightly below 4Kb), the syscall table is about 1/3 of that. We used to get away with that, but the recent changes had been enough to trigger the breakage. Proper fix is simple: have a macro (CALL(x)) to populate the table instead of using explicit .long x and the first time we include calls.S have it defined to .equ NR_syscalls,NR_syscalls+1. Then we can find the proper amount of padding on the first inclusion simply by looking at NR_syscalls at that time. And that will be constant, no matter what. Moreover, the same trick kills the need of having an estimate of padded NR_syscalls - it will be calculated for free at the same time. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 13:57:01 +01:00
CALL(sys_setfsuid16)
CALL(sys_setfsgid16)
/* 140 */ CALL(sys_llseek)
CALL(sys_getdents)
CALL(sys_select)
CALL(sys_flock)
CALL(sys_msync)
/* 145 */ CALL(sys_readv)
CALL(sys_writev)
CALL(sys_getsid)
CALL(sys_fdatasync)
CALL(sys_sysctl)
/* 150 */ CALL(sys_mlock)
CALL(sys_munlock)
CALL(sys_mlockall)
CALL(sys_munlockall)
CALL(sys_sched_setparam)
/* 155 */ CALL(sys_sched_getparam)
CALL(sys_sched_setscheduler)
CALL(sys_sched_getscheduler)
CALL(sys_sched_yield)
CALL(sys_sched_get_priority_max)
/* 160 */ CALL(sys_sched_get_priority_min)
CALL(sys_sched_rr_get_interval)
CALL(sys_nanosleep)
CALL(sys_arm_mremap)
CALL(sys_setresuid16)
/* 165 */ CALL(sys_getresuid16)
[ARM] Add more syscalls Add: sys_unshare sys_set_robust_list sys_get_robust_list sys_splice sys_arm_sync_file_range sys_tee sys_vmsplice sys_move_pages sys_getcpu Special note about sys_arm_sync_file_range(), which is implemented as: asmlinkage long sys_arm_sync_file_range(int fd, unsigned int flags, loff_t offset, loff_t nbytes) { return sys_sync_file_range(fd, offset, nbytes, flags); } We can't export sys_sync_file_range() directly on ARM because the argument list someone picked does not fit in the available registers. Would be nice if... there was an arch maintainer review mechanism for new syscalls before they hit the kernel. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-17 19:23:10 +01:00
CALL(sys_ni_syscall) /* vm86 */
[ARM] safer handling of syscall table padding ARM entry-common.S needs to know syscall table size; in itself that would not be a problem, but there's an additional constraint - some of the instructions using it want a constant that would be a multiple of 4. So we have to pad syscall table with sys_ni_syscall and that's where the trouble begins. .rept pseudo-op wants a constant expression for number of repetitions and subtraction of two labels (before and after syscall table) doesn't always get simplified to constant early enough for .rept. If labels end up in different frags, we lose. And while the frag size is large enough (slightly below 4Kb), the syscall table is about 1/3 of that. We used to get away with that, but the recent changes had been enough to trigger the breakage. Proper fix is simple: have a macro (CALL(x)) to populate the table instead of using explicit .long x and the first time we include calls.S have it defined to .equ NR_syscalls,NR_syscalls+1. Then we can find the proper amount of padding on the first inclusion simply by looking at NR_syscalls at that time. And that will be constant, no matter what. Moreover, the same trick kills the need of having an estimate of padded NR_syscalls - it will be calculated for free at the same time. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 13:57:01 +01:00
CALL(sys_ni_syscall) /* was sys_query_module */
CALL(sys_poll)
CALL(sys_nfsservctl)
/* 170 */ CALL(sys_setresgid16)
CALL(sys_getresgid16)
CALL(sys_prctl)
CALL(sys_rt_sigreturn_wrapper)
CALL(sys_rt_sigaction)
/* 175 */ CALL(sys_rt_sigprocmask)
CALL(sys_rt_sigpending)
CALL(sys_rt_sigtimedwait)
CALL(sys_rt_sigqueueinfo)
CALL(sys_rt_sigsuspend_wrapper)
/* 180 */ CALL(ABI(sys_pread64, sys_oabi_pread64))
CALL(ABI(sys_pwrite64, sys_oabi_pwrite64))
CALL(sys_chown16)
CALL(sys_getcwd)
CALL(sys_capget)
/* 185 */ CALL(sys_capset)
CALL(sys_sigaltstack_wrapper)
CALL(sys_sendfile)
[ARM] Add more syscalls Add: sys_unshare sys_set_robust_list sys_get_robust_list sys_splice sys_arm_sync_file_range sys_tee sys_vmsplice sys_move_pages sys_getcpu Special note about sys_arm_sync_file_range(), which is implemented as: asmlinkage long sys_arm_sync_file_range(int fd, unsigned int flags, loff_t offset, loff_t nbytes) { return sys_sync_file_range(fd, offset, nbytes, flags); } We can't export sys_sync_file_range() directly on ARM because the argument list someone picked does not fit in the available registers. Would be nice if... there was an arch maintainer review mechanism for new syscalls before they hit the kernel. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-17 19:23:10 +01:00
CALL(sys_ni_syscall) /* getpmsg */
CALL(sys_ni_syscall) /* putpmsg */
[ARM] safer handling of syscall table padding ARM entry-common.S needs to know syscall table size; in itself that would not be a problem, but there's an additional constraint - some of the instructions using it want a constant that would be a multiple of 4. So we have to pad syscall table with sys_ni_syscall and that's where the trouble begins. .rept pseudo-op wants a constant expression for number of repetitions and subtraction of two labels (before and after syscall table) doesn't always get simplified to constant early enough for .rept. If labels end up in different frags, we lose. And while the frag size is large enough (slightly below 4Kb), the syscall table is about 1/3 of that. We used to get away with that, but the recent changes had been enough to trigger the breakage. Proper fix is simple: have a macro (CALL(x)) to populate the table instead of using explicit .long x and the first time we include calls.S have it defined to .equ NR_syscalls,NR_syscalls+1. Then we can find the proper amount of padding on the first inclusion simply by looking at NR_syscalls at that time. And that will be constant, no matter what. Moreover, the same trick kills the need of having an estimate of padded NR_syscalls - it will be calculated for free at the same time. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 13:57:01 +01:00
/* 190 */ CALL(sys_vfork_wrapper)
CALL(sys_getrlimit)
CALL(sys_mmap2)
CALL(ABI(sys_truncate64, sys_oabi_truncate64))
CALL(ABI(sys_ftruncate64, sys_oabi_ftruncate64))
/* 195 */ CALL(ABI(sys_stat64, sys_oabi_stat64))
CALL(ABI(sys_lstat64, sys_oabi_lstat64))
CALL(ABI(sys_fstat64, sys_oabi_fstat64))
CALL(sys_lchown)
CALL(sys_getuid)
/* 200 */ CALL(sys_getgid)
CALL(sys_geteuid)
CALL(sys_getegid)
CALL(sys_setreuid)
CALL(sys_setregid)
/* 205 */ CALL(sys_getgroups)
CALL(sys_setgroups)
CALL(sys_fchown)
CALL(sys_setresuid)
CALL(sys_getresuid)
/* 210 */ CALL(sys_setresgid)
CALL(sys_getresgid)
CALL(sys_chown)
CALL(sys_setuid)
CALL(sys_setgid)
/* 215 */ CALL(sys_setfsuid)
CALL(sys_setfsgid)
CALL(sys_getdents64)
CALL(sys_pivot_root)
CALL(sys_mincore)
/* 220 */ CALL(sys_madvise)
CALL(ABI(sys_fcntl64, sys_oabi_fcntl64))
CALL(sys_ni_syscall) /* TUX */
CALL(sys_ni_syscall)
CALL(sys_gettid)
/* 225 */ CALL(ABI(sys_readahead, sys_oabi_readahead))
CALL(sys_setxattr)
CALL(sys_lsetxattr)
CALL(sys_fsetxattr)
CALL(sys_getxattr)
/* 230 */ CALL(sys_lgetxattr)
CALL(sys_fgetxattr)
CALL(sys_listxattr)
CALL(sys_llistxattr)
CALL(sys_flistxattr)
/* 235 */ CALL(sys_removexattr)
CALL(sys_lremovexattr)
CALL(sys_fremovexattr)
CALL(sys_tkill)
CALL(sys_sendfile64)
/* 240 */ CALL(sys_futex)
CALL(sys_sched_setaffinity)
CALL(sys_sched_getaffinity)
CALL(sys_io_setup)
CALL(sys_io_destroy)
/* 245 */ CALL(sys_io_getevents)
CALL(sys_io_submit)
CALL(sys_io_cancel)
CALL(sys_exit_group)
CALL(sys_lookup_dcookie)
/* 250 */ CALL(sys_epoll_create)
CALL(ABI(sys_epoll_ctl, sys_oabi_epoll_ctl))
CALL(ABI(sys_epoll_wait, sys_oabi_epoll_wait))
CALL(sys_remap_file_pages)
CALL(sys_ni_syscall) /* sys_set_thread_area */
/* 255 */ CALL(sys_ni_syscall) /* sys_get_thread_area */
CALL(sys_set_tid_address)
CALL(sys_timer_create)
CALL(sys_timer_settime)
CALL(sys_timer_gettime)
/* 260 */ CALL(sys_timer_getoverrun)
CALL(sys_timer_delete)
CALL(sys_clock_settime)
CALL(sys_clock_gettime)
CALL(sys_clock_getres)
/* 265 */ CALL(sys_clock_nanosleep)
CALL(sys_statfs64_wrapper)
CALL(sys_fstatfs64_wrapper)
CALL(sys_tgkill)
CALL(sys_utimes)
/* 270 */ CALL(sys_arm_fadvise64_64)
CALL(sys_pciconfig_iobase)
CALL(sys_pciconfig_read)
CALL(sys_pciconfig_write)
CALL(sys_mq_open)
/* 275 */ CALL(sys_mq_unlink)
CALL(sys_mq_timedsend)
CALL(sys_mq_timedreceive)
CALL(sys_mq_notify)
CALL(sys_mq_getsetattr)
/* 280 */ CALL(sys_waitid)
CALL(sys_socket)
[ARM] 3308/1: old ABI compat: struct sockaddr_un Patch from Nicolas Pitre struct sockaddr_un loses its padding with EABI. Since the size of the structure is used as a validation test in unix_mkname(), we need to change the length argument to 110 whenever it is 112. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-08 22:19:36 +01:00
CALL(ABI(sys_bind, sys_oabi_bind))
CALL(ABI(sys_connect, sys_oabi_connect))
[ARM] safer handling of syscall table padding ARM entry-common.S needs to know syscall table size; in itself that would not be a problem, but there's an additional constraint - some of the instructions using it want a constant that would be a multiple of 4. So we have to pad syscall table with sys_ni_syscall and that's where the trouble begins. .rept pseudo-op wants a constant expression for number of repetitions and subtraction of two labels (before and after syscall table) doesn't always get simplified to constant early enough for .rept. If labels end up in different frags, we lose. And while the frag size is large enough (slightly below 4Kb), the syscall table is about 1/3 of that. We used to get away with that, but the recent changes had been enough to trigger the breakage. Proper fix is simple: have a macro (CALL(x)) to populate the table instead of using explicit .long x and the first time we include calls.S have it defined to .equ NR_syscalls,NR_syscalls+1. Then we can find the proper amount of padding on the first inclusion simply by looking at NR_syscalls at that time. And that will be constant, no matter what. Moreover, the same trick kills the need of having an estimate of padded NR_syscalls - it will be calculated for free at the same time. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 13:57:01 +01:00
CALL(sys_listen)
/* 285 */ CALL(sys_accept)
CALL(sys_getsockname)
CALL(sys_getpeername)
CALL(sys_socketpair)
CALL(sys_send)
[ARM] 3308/1: old ABI compat: struct sockaddr_un Patch from Nicolas Pitre struct sockaddr_un loses its padding with EABI. Since the size of the structure is used as a validation test in unix_mkname(), we need to change the length argument to 110 whenever it is 112. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-08 22:19:36 +01:00
/* 290 */ CALL(ABI(sys_sendto, sys_oabi_sendto))
[ARM] safer handling of syscall table padding ARM entry-common.S needs to know syscall table size; in itself that would not be a problem, but there's an additional constraint - some of the instructions using it want a constant that would be a multiple of 4. So we have to pad syscall table with sys_ni_syscall and that's where the trouble begins. .rept pseudo-op wants a constant expression for number of repetitions and subtraction of two labels (before and after syscall table) doesn't always get simplified to constant early enough for .rept. If labels end up in different frags, we lose. And while the frag size is large enough (slightly below 4Kb), the syscall table is about 1/3 of that. We used to get away with that, but the recent changes had been enough to trigger the breakage. Proper fix is simple: have a macro (CALL(x)) to populate the table instead of using explicit .long x and the first time we include calls.S have it defined to .equ NR_syscalls,NR_syscalls+1. Then we can find the proper amount of padding on the first inclusion simply by looking at NR_syscalls at that time. And that will be constant, no matter what. Moreover, the same trick kills the need of having an estimate of padded NR_syscalls - it will be calculated for free at the same time. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 13:57:01 +01:00
CALL(sys_recv)
CALL(sys_recvfrom)
CALL(sys_shutdown)
CALL(sys_setsockopt)
/* 295 */ CALL(sys_getsockopt)
[ARM] 3308/1: old ABI compat: struct sockaddr_un Patch from Nicolas Pitre struct sockaddr_un loses its padding with EABI. Since the size of the structure is used as a validation test in unix_mkname(), we need to change the length argument to 110 whenever it is 112. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-08 22:19:36 +01:00
CALL(ABI(sys_sendmsg, sys_oabi_sendmsg))
[ARM] safer handling of syscall table padding ARM entry-common.S needs to know syscall table size; in itself that would not be a problem, but there's an additional constraint - some of the instructions using it want a constant that would be a multiple of 4. So we have to pad syscall table with sys_ni_syscall and that's where the trouble begins. .rept pseudo-op wants a constant expression for number of repetitions and subtraction of two labels (before and after syscall table) doesn't always get simplified to constant early enough for .rept. If labels end up in different frags, we lose. And while the frag size is large enough (slightly below 4Kb), the syscall table is about 1/3 of that. We used to get away with that, but the recent changes had been enough to trigger the breakage. Proper fix is simple: have a macro (CALL(x)) to populate the table instead of using explicit .long x and the first time we include calls.S have it defined to .equ NR_syscalls,NR_syscalls+1. Then we can find the proper amount of padding on the first inclusion simply by looking at NR_syscalls at that time. And that will be constant, no matter what. Moreover, the same trick kills the need of having an estimate of padded NR_syscalls - it will be calculated for free at the same time. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 13:57:01 +01:00
CALL(sys_recvmsg)
CALL(ABI(sys_semop, sys_oabi_semop))
CALL(sys_semget)
/* 300 */ CALL(sys_semctl)
CALL(sys_msgsnd)
CALL(sys_msgrcv)
CALL(sys_msgget)
CALL(sys_msgctl)
/* 305 */ CALL(sys_shmat)
CALL(sys_shmdt)
CALL(sys_shmget)
CALL(sys_shmctl)
CALL(sys_add_key)
/* 310 */ CALL(sys_request_key)
CALL(sys_keyctl)
CALL(ABI(sys_semtimedop, sys_oabi_semtimedop))
/* vserver */ CALL(sys_ni_syscall)
CALL(sys_ioprio_set)
/* 315 */ CALL(sys_ioprio_get)
CALL(sys_inotify_init)
CALL(sys_inotify_add_watch)
CALL(sys_inotify_rm_watch)
CALL(sys_mbind)
/* 320 */ CALL(sys_get_mempolicy)
CALL(sys_set_mempolicy)
[ARM] Add sys_*at syscalls Later glibc requires the *at syscalls. Add them. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-09 17:41:55 +01:00
CALL(sys_openat)
CALL(sys_mkdirat)
CALL(sys_mknodat)
/* 325 */ CALL(sys_fchownat)
CALL(sys_futimesat)
CALL(sys_fstatat64)
CALL(sys_unlinkat)
CALL(sys_renameat)
/* 330 */ CALL(sys_linkat)
CALL(sys_symlinkat)
CALL(sys_readlinkat)
CALL(sys_fchmodat)
CALL(sys_faccessat)
[ARM] Add more syscalls Add: sys_unshare sys_set_robust_list sys_get_robust_list sys_splice sys_arm_sync_file_range sys_tee sys_vmsplice sys_move_pages sys_getcpu Special note about sys_arm_sync_file_range(), which is implemented as: asmlinkage long sys_arm_sync_file_range(int fd, unsigned int flags, loff_t offset, loff_t nbytes) { return sys_sync_file_range(fd, offset, nbytes, flags); } We can't export sys_sync_file_range() directly on ARM because the argument list someone picked does not fit in the available registers. Would be nice if... there was an arch maintainer review mechanism for new syscalls before they hit the kernel. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-17 19:23:10 +01:00
/* 335 */ CALL(sys_ni_syscall) /* eventually pselect6 */
CALL(sys_ni_syscall) /* eventually ppoll */
CALL(sys_unshare)
CALL(sys_set_robust_list)
CALL(sys_get_robust_list)
/* 340 */ CALL(sys_splice)
Introduce fixed sys_sync_file_range2() syscall, implement on PowerPC and ARM Not all the world is an i386. Many architectures need 64-bit arguments to be aligned in suitable pairs of registers, and the original sys_sync_file_range(int, loff_t, loff_t, int) was therefore wasting an argument register for padding after the first integer. Since we don't normally have more than 6 arguments for system calls, that left no room for the final argument on some architectures. Fix this by introducing sys_sync_file_range2(int, int, loff_t, loff_t) which all fits nicely. In fact, ARM already had that, but called it sys_arm_sync_file_range. Move it to fs/sync.c and rename it, then implement the needed compatibility routine. And stop the missing syscall check from bitching about the absence of sys_sync_file_range() if we've implemented sys_sync_file_range2() instead. Tested on PPC32 and with 32-bit and 64-bit userspace on PPC64. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-27 23:10:09 +02:00
CALL(sys_sync_file_range2)
[ARM] Add more syscalls Add: sys_unshare sys_set_robust_list sys_get_robust_list sys_splice sys_arm_sync_file_range sys_tee sys_vmsplice sys_move_pages sys_getcpu Special note about sys_arm_sync_file_range(), which is implemented as: asmlinkage long sys_arm_sync_file_range(int fd, unsigned int flags, loff_t offset, loff_t nbytes) { return sys_sync_file_range(fd, offset, nbytes, flags); } We can't export sys_sync_file_range() directly on ARM because the argument list someone picked does not fit in the available registers. Would be nice if... there was an arch maintainer review mechanism for new syscalls before they hit the kernel. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-17 19:23:10 +01:00
CALL(sys_tee)
CALL(sys_vmsplice)
CALL(sys_move_pages)
/* 345 */ CALL(sys_getcpu)
CALL(sys_ni_syscall) /* eventually epoll_pwait */
[ARM] 4137/1: Add kexec support Add kexec support to ARM. Improvements like commandline handling could be made but this patch gives basic functional support. It uses the next available syscall number, 347. Once the syscall number is known, userspace support will be finalised/submitted to kexec-tools, various patches already exist. Originally based on a patch by Maxim Syrchin but updated and forward ported by various people. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-06 21:29:00 +01:00
CALL(sys_kexec_load)
[ARM] Update ARM syscalls Add utimensat, signalfd, timerfd, eventfd syscalls. Add ignore defines for sync_file_range and fadvise64_64 which we implement differently. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-16 13:41:15 +02:00
CALL(sys_utimensat)
CALL(sys_signalfd)
/* 350 */ CALL(sys_timerfd)
CALL(sys_eventfd)
[ARM] Add fallocate syscall entry Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-09-30 18:37:24 +02:00
CALL(sys_fallocate)
[ARM] safer handling of syscall table padding ARM entry-common.S needs to know syscall table size; in itself that would not be a problem, but there's an additional constraint - some of the instructions using it want a constant that would be a multiple of 4. So we have to pad syscall table with sys_ni_syscall and that's where the trouble begins. .rept pseudo-op wants a constant expression for number of repetitions and subtraction of two labels (before and after syscall table) doesn't always get simplified to constant early enough for .rept. If labels end up in different frags, we lose. And while the frag size is large enough (slightly below 4Kb), the syscall table is about 1/3 of that. We used to get away with that, but the recent changes had been enough to trigger the breakage. Proper fix is simple: have a macro (CALL(x)) to populate the table instead of using explicit .long x and the first time we include calls.S have it defined to .equ NR_syscalls,NR_syscalls+1. Then we can find the proper amount of padding on the first inclusion simply by looking at NR_syscalls at that time. And that will be constant, no matter what. Moreover, the same trick kills the need of having an estimate of padded NR_syscalls - it will be calculated for free at the same time. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 13:57:01 +01:00
#ifndef syscalls_counted
.equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
#define syscalls_counted
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
#endif
[ARM] safer handling of syscall table padding ARM entry-common.S needs to know syscall table size; in itself that would not be a problem, but there's an additional constraint - some of the instructions using it want a constant that would be a multiple of 4. So we have to pad syscall table with sys_ni_syscall and that's where the trouble begins. .rept pseudo-op wants a constant expression for number of repetitions and subtraction of two labels (before and after syscall table) doesn't always get simplified to constant early enough for .rept. If labels end up in different frags, we lose. And while the frag size is large enough (slightly below 4Kb), the syscall table is about 1/3 of that. We used to get away with that, but the recent changes had been enough to trigger the breakage. Proper fix is simple: have a macro (CALL(x)) to populate the table instead of using explicit .long x and the first time we include calls.S have it defined to .equ NR_syscalls,NR_syscalls+1. Then we can find the proper amount of padding on the first inclusion simply by looking at NR_syscalls at that time. And that will be constant, no matter what. Moreover, the same trick kills the need of having an estimate of padded NR_syscalls - it will be calculated for free at the same time. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 13:57:01 +01:00
.rept syscalls_padding
CALL(sys_ni_syscall)
.endr