linux/arch/powerpc/kernel/vio.c

1684 lines
47 KiB
C
Raw Normal View History

/*
* IBM PowerPC Virtual I/O Infrastructure Support.
*
powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-23 20:31:33 +02:00
* Copyright (c) 2003,2008 IBM Corp.
* Dave Engebretsen engebret@us.ibm.com
* Santiago Leon santil@us.ibm.com
* Hollis Blanchard <hollisb@us.ibm.com>
* Stephen Rothwell
powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-23 20:31:33 +02:00
* Robert Jennings <rcjenn@us.ibm.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/cpu.h>
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/stat.h>
#include <linux/device.h>
#include <linux/init.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 09:04:11 +01:00
#include <linux/slab.h>
#include <linux/console.h>
#include <linux/export.h>
#include <linux/mm.h>
#include <linux/dma-mapping.h>
#include <linux/kobject.h>
#include <asm/iommu.h>
#include <asm/dma.h>
#include <asm/vio.h>
#include <asm/prom.h>
#include <asm/firmware.h>
#include <asm/tce.h>
#include <asm/page.h>
#include <asm/hvcall.h>
static struct vio_dev vio_bus_device = { /* fake "parent" device */
.name = "vio",
.type = "",
.dev.init_name = "vio",
.dev.bus = &vio_bus_type,
};
powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-23 20:31:33 +02:00
#ifdef CONFIG_PPC_SMLPAR
/**
* vio_cmo_pool - A pool of IO memory for CMO use
*
* @size: The size of the pool in bytes
* @free: The amount of free memory in the pool
*/
struct vio_cmo_pool {
size_t size;
size_t free;
};
/* How many ms to delay queued balance work */
#define VIO_CMO_BALANCE_DELAY 100
/* Portion out IO memory to CMO devices by this chunk size */
#define VIO_CMO_BALANCE_CHUNK 131072
/**
* vio_cmo_dev_entry - A device that is CMO-enabled and requires entitlement
*
* @vio_dev: struct vio_dev pointer
* @list: pointer to other devices on bus that are being tracked
*/
struct vio_cmo_dev_entry {
struct vio_dev *viodev;
struct list_head list;
};
/**
* vio_cmo - VIO bus accounting structure for CMO entitlement
*
* @lock: spinlock for entire structure
* @balance_q: work queue for balancing system entitlement
* @device_list: list of CMO-enabled devices requiring entitlement
* @entitled: total system entitlement in bytes
* @reserve: pool of memory from which devices reserve entitlement, incl. spare
* @excess: pool of excess entitlement not needed for device reserves or spare
* @spare: IO memory for device hotplug functionality
* @min: minimum necessary for system operation
* @desired: desired memory for system operation
* @curr: bytes currently allocated
* @high: high water mark for IO data usage
*/
struct vio_cmo {
spinlock_t lock;
struct delayed_work balance_q;
struct list_head device_list;
size_t entitled;
struct vio_cmo_pool reserve;
struct vio_cmo_pool excess;
size_t spare;
size_t min;
size_t desired;
size_t curr;
size_t high;
} vio_cmo;
/**
* vio_cmo_OF_devices - Count the number of OF devices that have DMA windows
*/
static int vio_cmo_num_OF_devs(void)
{
struct device_node *node_vroot;
int count = 0;
/*
* Count the number of vdevice entries with an
* ibm,my-dma-window OF property
*/
node_vroot = of_find_node_by_name(NULL, "vdevice");
if (node_vroot) {
struct device_node *of_node;
struct property *prop;
for_each_child_of_node(node_vroot, of_node) {
prop = of_find_property(of_node, "ibm,my-dma-window",
NULL);
if (prop)
count++;
}
}
of_node_put(node_vroot);
return count;
}
/**
* vio_cmo_alloc - allocate IO memory for CMO-enable devices
*
* @viodev: VIO device requesting IO memory
* @size: size of allocation requested
*
* Allocations come from memory reserved for the devices and any excess
* IO memory available to all devices. The spare pool used to service
* hotplug must be equal to %VIO_CMO_MIN_ENT for the excess pool to be
* made available.
*
* Return codes:
* 0 for successful allocation and -ENOMEM for a failure
*/
static inline int vio_cmo_alloc(struct vio_dev *viodev, size_t size)
{
unsigned long flags;
size_t reserve_free = 0;
size_t excess_free = 0;
int ret = -ENOMEM;
spin_lock_irqsave(&vio_cmo.lock, flags);
/* Determine the amount of free entitlement available in reserve */
if (viodev->cmo.entitled > viodev->cmo.allocated)
reserve_free = viodev->cmo.entitled - viodev->cmo.allocated;
/* If spare is not fulfilled, the excess pool can not be used. */
if (vio_cmo.spare >= VIO_CMO_MIN_ENT)
excess_free = vio_cmo.excess.free;
/* The request can be satisfied */
if ((reserve_free + excess_free) >= size) {
vio_cmo.curr += size;
if (vio_cmo.curr > vio_cmo.high)
vio_cmo.high = vio_cmo.curr;
viodev->cmo.allocated += size;
size -= min(reserve_free, size);
vio_cmo.excess.free -= size;
ret = 0;
}
spin_unlock_irqrestore(&vio_cmo.lock, flags);
return ret;
}
/**
* vio_cmo_dealloc - deallocate IO memory from CMO-enable devices
* @viodev: VIO device freeing IO memory
* @size: size of deallocation
*
* IO memory is freed by the device back to the correct memory pools.
* The spare pool is replenished first from either memory pool, then
* the reserve pool is used to reduce device entitlement, the excess
* pool is used to increase the reserve pool toward the desired entitlement
* target, and then the remaining memory is returned to the pools.
*
*/
static inline void vio_cmo_dealloc(struct vio_dev *viodev, size_t size)
{
unsigned long flags;
size_t spare_needed = 0;
size_t excess_freed = 0;
size_t reserve_freed = size;
size_t tmp;
int balance = 0;
spin_lock_irqsave(&vio_cmo.lock, flags);
vio_cmo.curr -= size;
/* Amount of memory freed from the excess pool */
if (viodev->cmo.allocated > viodev->cmo.entitled) {
excess_freed = min(reserve_freed, (viodev->cmo.allocated -
viodev->cmo.entitled));
reserve_freed -= excess_freed;
}
/* Remove allocation from device */
viodev->cmo.allocated -= (reserve_freed + excess_freed);
/* Spare is a subset of the reserve pool, replenish it first. */
spare_needed = VIO_CMO_MIN_ENT - vio_cmo.spare;
/*
* Replenish the spare in the reserve pool from the excess pool.
* This moves entitlement into the reserve pool.
*/
if (spare_needed && excess_freed) {
tmp = min(excess_freed, spare_needed);
vio_cmo.excess.size -= tmp;
vio_cmo.reserve.size += tmp;
vio_cmo.spare += tmp;
excess_freed -= tmp;
spare_needed -= tmp;
balance = 1;
}
/*
* Replenish the spare in the reserve pool from the reserve pool.
* This removes entitlement from the device down to VIO_CMO_MIN_ENT,
* if needed, and gives it to the spare pool. The amount of used
* memory in this pool does not change.
*/
if (spare_needed && reserve_freed) {
tmp = min3(spare_needed, reserve_freed, (viodev->cmo.entitled - VIO_CMO_MIN_ENT));
powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-23 20:31:33 +02:00
vio_cmo.spare += tmp;
viodev->cmo.entitled -= tmp;
reserve_freed -= tmp;
spare_needed -= tmp;
balance = 1;
}
/*
* Increase the reserve pool until the desired allocation is met.
* Move an allocation freed from the excess pool into the reserve
* pool and schedule a balance operation.
*/
if (excess_freed && (vio_cmo.desired > vio_cmo.reserve.size)) {
tmp = min(excess_freed, (vio_cmo.desired - vio_cmo.reserve.size));
vio_cmo.excess.size -= tmp;
vio_cmo.reserve.size += tmp;
excess_freed -= tmp;
balance = 1;
}
/* Return memory from the excess pool to that pool */
if (excess_freed)
vio_cmo.excess.free += excess_freed;
if (balance)
schedule_delayed_work(&vio_cmo.balance_q, VIO_CMO_BALANCE_DELAY);
spin_unlock_irqrestore(&vio_cmo.lock, flags);
}
/**
* vio_cmo_entitlement_update - Manage system entitlement changes
*
* @new_entitlement: new system entitlement to attempt to accommodate
*
* Increases in entitlement will be used to fulfill the spare entitlement
* and the rest is given to the excess pool. Decreases, if they are
* possible, come from the excess pool and from unused device entitlement
*
* Returns: 0 on success, -ENOMEM when change can not be made
*/
int vio_cmo_entitlement_update(size_t new_entitlement)
{
struct vio_dev *viodev;
struct vio_cmo_dev_entry *dev_ent;
unsigned long flags;
size_t avail, delta, tmp;
spin_lock_irqsave(&vio_cmo.lock, flags);
/* Entitlement increases */
if (new_entitlement > vio_cmo.entitled) {
delta = new_entitlement - vio_cmo.entitled;
/* Fulfill spare allocation */
if (vio_cmo.spare < VIO_CMO_MIN_ENT) {
tmp = min(delta, (VIO_CMO_MIN_ENT - vio_cmo.spare));
vio_cmo.spare += tmp;
vio_cmo.reserve.size += tmp;
delta -= tmp;
}
/* Remaining new allocation goes to the excess pool */
vio_cmo.entitled += delta;
vio_cmo.excess.size += delta;
vio_cmo.excess.free += delta;
goto out;
}
/* Entitlement decreases */
delta = vio_cmo.entitled - new_entitlement;
avail = vio_cmo.excess.free;
/*
* Need to check how much unused entitlement each device can
* sacrifice to fulfill entitlement change.
*/
list_for_each_entry(dev_ent, &vio_cmo.device_list, list) {
if (avail >= delta)
break;
viodev = dev_ent->viodev;
if ((viodev->cmo.entitled > viodev->cmo.allocated) &&
(viodev->cmo.entitled > VIO_CMO_MIN_ENT))
avail += viodev->cmo.entitled -
max_t(size_t, viodev->cmo.allocated,
VIO_CMO_MIN_ENT);
}
if (delta <= avail) {
vio_cmo.entitled -= delta;
/* Take entitlement from the excess pool first */
tmp = min(vio_cmo.excess.free, delta);
vio_cmo.excess.size -= tmp;
vio_cmo.excess.free -= tmp;
delta -= tmp;
/*
* Remove all but VIO_CMO_MIN_ENT bytes from devices
* until entitlement change is served
*/
list_for_each_entry(dev_ent, &vio_cmo.device_list, list) {
if (!delta)
break;
viodev = dev_ent->viodev;
tmp = 0;
if ((viodev->cmo.entitled > viodev->cmo.allocated) &&
(viodev->cmo.entitled > VIO_CMO_MIN_ENT))
tmp = viodev->cmo.entitled -
max_t(size_t, viodev->cmo.allocated,
VIO_CMO_MIN_ENT);
viodev->cmo.entitled -= min(tmp, delta);
delta -= min(tmp, delta);
}
} else {
spin_unlock_irqrestore(&vio_cmo.lock, flags);
return -ENOMEM;
}
out:
schedule_delayed_work(&vio_cmo.balance_q, 0);
spin_unlock_irqrestore(&vio_cmo.lock, flags);
return 0;
}
/**
* vio_cmo_balance - Balance entitlement among devices
*
* @work: work queue structure for this operation
*
* Any system entitlement above the minimum needed for devices, or
* already allocated to devices, can be distributed to the devices.
* The list of devices is iterated through to recalculate the desired
* entitlement level and to determine how much entitlement above the
* minimum entitlement is allocated to devices.
*
* Small chunks of the available entitlement are given to devices until
* their requirements are fulfilled or there is no entitlement left to give.
* Upon completion sizes of the reserve and excess pools are calculated.
*
* The system minimum entitlement level is also recalculated here.
* Entitlement will be reserved for devices even after vio_bus_remove to
* accommodate reloading the driver. The OF tree is walked to count the
* number of devices present and this will remove entitlement for devices
* that have actually left the system after having vio_bus_remove called.
*/
static void vio_cmo_balance(struct work_struct *work)
{
struct vio_cmo *cmo;
struct vio_dev *viodev;
struct vio_cmo_dev_entry *dev_ent;
unsigned long flags;
size_t avail = 0, level, chunk, need;
int devcount = 0, fulfilled;
cmo = container_of(work, struct vio_cmo, balance_q.work);
spin_lock_irqsave(&vio_cmo.lock, flags);
/* Calculate minimum entitlement and fulfill spare */
cmo->min = vio_cmo_num_OF_devs() * VIO_CMO_MIN_ENT;
BUG_ON(cmo->min > cmo->entitled);
cmo->spare = min_t(size_t, VIO_CMO_MIN_ENT, (cmo->entitled - cmo->min));
cmo->min += cmo->spare;
cmo->desired = cmo->min;
/*
* Determine how much entitlement is available and reset device
* entitlements
*/
avail = cmo->entitled - cmo->spare;
list_for_each_entry(dev_ent, &vio_cmo.device_list, list) {
viodev = dev_ent->viodev;
devcount++;
viodev->cmo.entitled = VIO_CMO_MIN_ENT;
cmo->desired += (viodev->cmo.desired - VIO_CMO_MIN_ENT);
avail -= max_t(size_t, viodev->cmo.allocated, VIO_CMO_MIN_ENT);
}
/*
* Having provided each device with the minimum entitlement, loop
* over the devices portioning out the remaining entitlement
* until there is nothing left.
*/
level = VIO_CMO_MIN_ENT;
while (avail) {
fulfilled = 0;
list_for_each_entry(dev_ent, &vio_cmo.device_list, list) {
viodev = dev_ent->viodev;
if (viodev->cmo.desired <= level) {
fulfilled++;
continue;
}
/*
* Give the device up to VIO_CMO_BALANCE_CHUNK
* bytes of entitlement, but do not exceed the
* desired level of entitlement for the device.
*/
chunk = min_t(size_t, avail, VIO_CMO_BALANCE_CHUNK);
chunk = min(chunk, (viodev->cmo.desired -
viodev->cmo.entitled));
viodev->cmo.entitled += chunk;
/*
* If the memory for this entitlement increase was
* already allocated to the device it does not come
* from the available pool being portioned out.
*/
need = max(viodev->cmo.allocated, viodev->cmo.entitled)-
max(viodev->cmo.allocated, level);
avail -= need;
}
if (fulfilled == devcount)
break;
level += VIO_CMO_BALANCE_CHUNK;
}
/* Calculate new reserve and excess pool sizes */
cmo->reserve.size = cmo->min;
cmo->excess.free = 0;
cmo->excess.size = 0;
need = 0;
list_for_each_entry(dev_ent, &vio_cmo.device_list, list) {
viodev = dev_ent->viodev;
/* Calculated reserve size above the minimum entitlement */
if (viodev->cmo.entitled)
cmo->reserve.size += (viodev->cmo.entitled -
VIO_CMO_MIN_ENT);
/* Calculated used excess entitlement */
if (viodev->cmo.allocated > viodev->cmo.entitled)
need += viodev->cmo.allocated - viodev->cmo.entitled;
}
cmo->excess.size = cmo->entitled - cmo->reserve.size;
cmo->excess.free = cmo->excess.size - need;
cancel_delayed_work(to_delayed_work(work));
powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-23 20:31:33 +02:00
spin_unlock_irqrestore(&vio_cmo.lock, flags);
}
static void *vio_dma_iommu_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t flag,
struct dma_attrs *attrs)
powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-23 20:31:33 +02:00
{
struct vio_dev *viodev = to_vio_dev(dev);
void *ret;
if (vio_cmo_alloc(viodev, roundup(size, PAGE_SIZE))) {
powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-23 20:31:33 +02:00
atomic_inc(&viodev->cmo.allocs_failed);
return NULL;
}
ret = dma_iommu_ops.alloc(dev, size, dma_handle, flag, attrs);
powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-23 20:31:33 +02:00
if (unlikely(ret == NULL)) {
vio_cmo_dealloc(viodev, roundup(size, PAGE_SIZE));
powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-23 20:31:33 +02:00
atomic_inc(&viodev->cmo.allocs_failed);
}
return ret;
}
static void vio_dma_iommu_free_coherent(struct device *dev, size_t size,
void *vaddr, dma_addr_t dma_handle,
struct dma_attrs *attrs)
powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-23 20:31:33 +02:00
{
struct vio_dev *viodev = to_vio_dev(dev);
dma_iommu_ops.free(dev, size, vaddr, dma_handle, attrs);
powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-23 20:31:33 +02:00
vio_cmo_dealloc(viodev, roundup(size, PAGE_SIZE));
powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-23 20:31:33 +02:00
}
static dma_addr_t vio_dma_iommu_map_page(struct device *dev, struct page *page,
unsigned long offset, size_t size,
enum dma_data_direction direction,
struct dma_attrs *attrs)
powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-23 20:31:33 +02:00
{
struct vio_dev *viodev = to_vio_dev(dev);
dma_addr_t ret = DMA_ERROR_CODE;
if (vio_cmo_alloc(viodev, roundup(size, IOMMU_PAGE_SIZE))) {
atomic_inc(&viodev->cmo.allocs_failed);
return ret;
}
ret = dma_iommu_ops.map_page(dev, page, offset, size, direction, attrs);
if (unlikely(dma_mapping_error(dev, ret))) {
powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-23 20:31:33 +02:00
vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE));
atomic_inc(&viodev->cmo.allocs_failed);
}
return ret;
}
static void vio_dma_iommu_unmap_page(struct device *dev, dma_addr_t dma_handle,
size_t size,
enum dma_data_direction direction,
struct dma_attrs *attrs)
powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-23 20:31:33 +02:00
{
struct vio_dev *viodev = to_vio_dev(dev);
dma_iommu_ops.unmap_page(dev, dma_handle, size, direction, attrs);
powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-23 20:31:33 +02:00
vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE));
}
static int vio_dma_iommu_map_sg(struct device *dev, struct scatterlist *sglist,
int nelems, enum dma_data_direction direction,
struct dma_attrs *attrs)
{
struct vio_dev *viodev = to_vio_dev(dev);
struct scatterlist *sgl;
int ret, count = 0;
size_t alloc_size = 0;
for (sgl = sglist; count < nelems; count++, sgl++)
alloc_size += roundup(sgl->length, IOMMU_PAGE_SIZE);
if (vio_cmo_alloc(viodev, alloc_size)) {
atomic_inc(&viodev->cmo.allocs_failed);
return 0;
}
ret = dma_iommu_ops.map_sg(dev, sglist, nelems, direction, attrs);
if (unlikely(!ret)) {
vio_cmo_dealloc(viodev, alloc_size);
atomic_inc(&viodev->cmo.allocs_failed);
return ret;
powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-23 20:31:33 +02:00
}
for (sgl = sglist, count = 0; count < ret; count++, sgl++)
alloc_size -= roundup(sgl->dma_length, IOMMU_PAGE_SIZE);
if (alloc_size)
vio_cmo_dealloc(viodev, alloc_size);
return ret;
}
static void vio_dma_iommu_unmap_sg(struct device *dev,
struct scatterlist *sglist, int nelems,
enum dma_data_direction direction,
struct dma_attrs *attrs)
{
struct vio_dev *viodev = to_vio_dev(dev);
struct scatterlist *sgl;
size_t alloc_size = 0;
int count = 0;
for (sgl = sglist; count < nelems; count++, sgl++)
alloc_size += roundup(sgl->dma_length, IOMMU_PAGE_SIZE);
dma_iommu_ops.unmap_sg(dev, sglist, nelems, direction, attrs);
vio_cmo_dealloc(viodev, alloc_size);
}
static int vio_dma_iommu_dma_supported(struct device *dev, u64 mask)
{
return dma_iommu_ops.dma_supported(dev, mask);
}
static u64 vio_dma_get_required_mask(struct device *dev)
{
return dma_iommu_ops.get_required_mask(dev);
}
struct dma_map_ops vio_dma_mapping_ops = {
.alloc = vio_dma_iommu_alloc_coherent,
.free = vio_dma_iommu_free_coherent,
.mmap = dma_direct_mmap_coherent,
.map_sg = vio_dma_iommu_map_sg,
.unmap_sg = vio_dma_iommu_unmap_sg,
.map_page = vio_dma_iommu_map_page,
.unmap_page = vio_dma_iommu_unmap_page,
.dma_supported = vio_dma_iommu_dma_supported,
.get_required_mask = vio_dma_get_required_mask,
powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-23 20:31:33 +02:00
};
/**
* vio_cmo_set_dev_desired - Set desired entitlement for a device
*
* @viodev: struct vio_dev for device to alter
* @desired: new desired entitlement level in bytes
powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-23 20:31:33 +02:00
*
* For use by devices to request a change to their entitlement at runtime or
* through sysfs. The desired entitlement level is changed and a balancing
* of system resources is scheduled to run in the future.
*/
void vio_cmo_set_dev_desired(struct vio_dev *viodev, size_t desired)
{
unsigned long flags;
struct vio_cmo_dev_entry *dev_ent;
int found = 0;
if (!firmware_has_feature(FW_FEATURE_CMO))
return;
spin_lock_irqsave(&vio_cmo.lock, flags);
if (desired < VIO_CMO_MIN_ENT)
desired = VIO_CMO_MIN_ENT;
/*
* Changes will not be made for devices not in the device list.
* If it is not in the device list, then no driver is loaded
* for the device and it can not receive entitlement.
*/
list_for_each_entry(dev_ent, &vio_cmo.device_list, list)
if (viodev == dev_ent->viodev) {
found = 1;
break;
}
if (!found) {
spin_unlock_irqrestore(&vio_cmo.lock, flags);
powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-23 20:31:33 +02:00
return;
}
powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-23 20:31:33 +02:00
/* Increase/decrease in desired device entitlement */
if (desired >= viodev->cmo.desired) {
/* Just bump the bus and device values prior to a balance*/
vio_cmo.desired += desired - viodev->cmo.desired;
viodev->cmo.desired = desired;
} else {
/* Decrease bus and device values for desired entitlement */
vio_cmo.desired -= viodev->cmo.desired - desired;
viodev->cmo.desired = desired;
/*
* If less entitlement is desired than current entitlement, move
* any reserve memory in the change region to the excess pool.
*/
if (viodev->cmo.entitled > desired) {
vio_cmo.reserve.size -= viodev->cmo.entitled - desired;
vio_cmo.excess.size += viodev->cmo.entitled - desired;
/*
* If entitlement moving from the reserve pool to the
* excess pool is currently unused, add to the excess
* free counter.
*/
if (viodev->cmo.allocated < viodev->cmo.entitled)
vio_cmo.excess.free += viodev->cmo.entitled -
max(viodev->cmo.allocated, desired);
viodev->cmo.entitled = desired;
}
}
schedule_delayed_work(&vio_cmo.balance_q, 0);
spin_unlock_irqrestore(&vio_cmo.lock, flags);
}
/**
* vio_cmo_bus_probe - Handle CMO specific bus probe activities
*
* @viodev - Pointer to struct vio_dev for device
*
* Determine the devices IO memory entitlement needs, attempting
* to satisfy the system minimum entitlement at first and scheduling
* a balance operation to take care of the rest at a later time.
*
* Returns: 0 on success, -EINVAL when device doesn't support CMO, and
* -ENOMEM when entitlement is not available for device or
* device entry.
*
*/
static int vio_cmo_bus_probe(struct vio_dev *viodev)
{
struct vio_cmo_dev_entry *dev_ent;
struct device *dev = &viodev->dev;
struct vio_driver *viodrv = to_vio_driver(dev->driver);
unsigned long flags;
size_t size;
bool dma_capable = false;
/* A device requires entitlement if it has a DMA window property */
switch (viodev->family) {
case VDEVICE:
if (of_get_property(viodev->dev.of_node,
"ibm,my-dma-window", NULL))
dma_capable = true;
break;
case PFO:
dma_capable = false;
break;
default:
dev_warn(dev, "unknown device family: %d\n", viodev->family);
BUG();
break;
}
powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-23 20:31:33 +02:00
/* Configure entitlement for the device. */
if (dma_capable) {
powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-23 20:31:33 +02:00
/* Check that the driver is CMO enabled and get desired DMA */
if (!viodrv->get_desired_dma) {
dev_err(dev, "%s: device driver does not support CMO\n",
__func__);
return -EINVAL;
}
viodev->cmo.desired = IOMMU_PAGE_ALIGN(viodrv->get_desired_dma(viodev));
if (viodev->cmo.desired < VIO_CMO_MIN_ENT)
viodev->cmo.desired = VIO_CMO_MIN_ENT;
size = VIO_CMO_MIN_ENT;
dev_ent = kmalloc(sizeof(struct vio_cmo_dev_entry),
GFP_KERNEL);
if (!dev_ent)
return -ENOMEM;
dev_ent->viodev = viodev;
spin_lock_irqsave(&vio_cmo.lock, flags);
list_add(&dev_ent->list, &vio_cmo.device_list);
} else {
viodev->cmo.desired = 0;
size = 0;
spin_lock_irqsave(&vio_cmo.lock, flags);
}
/*
* If the needs for vio_cmo.min have not changed since they
* were last set, the number of devices in the OF tree has
* been constant and the IO memory for this is already in
* the reserve pool.
*/
if (vio_cmo.min == ((vio_cmo_num_OF_devs() + 1) *
VIO_CMO_MIN_ENT)) {
/* Updated desired entitlement if device requires it */
if (size)
vio_cmo.desired += (viodev->cmo.desired -
VIO_CMO_MIN_ENT);
} else {
size_t tmp;
tmp = vio_cmo.spare + vio_cmo.excess.free;
if (tmp < size) {
dev_err(dev, "%s: insufficient free "
"entitlement to add device. "
"Need %lu, have %lu\n", __func__,
size, (vio_cmo.spare + tmp));
spin_unlock_irqrestore(&vio_cmo.lock, flags);
return -ENOMEM;
}
/* Use excess pool first to fulfill request */
tmp = min(size, vio_cmo.excess.free);
vio_cmo.excess.free -= tmp;
vio_cmo.excess.size -= tmp;
vio_cmo.reserve.size += tmp;
/* Use spare if excess pool was insufficient */
vio_cmo.spare -= size - tmp;
/* Update bus accounting */
vio_cmo.min += size;
vio_cmo.desired += viodev->cmo.desired;
}
spin_unlock_irqrestore(&vio_cmo.lock, flags);
return 0;
}
/**
* vio_cmo_bus_remove - Handle CMO specific bus removal activities
*
* @viodev - Pointer to struct vio_dev for device
*
* Remove the device from the cmo device list. The minimum entitlement
* will be reserved for the device as long as it is in the system. The
* rest of the entitlement the device had been allocated will be returned
* to the system.
*/
static void vio_cmo_bus_remove(struct vio_dev *viodev)
{
struct vio_cmo_dev_entry *dev_ent;
unsigned long flags;
size_t tmp;
spin_lock_irqsave(&vio_cmo.lock, flags);
if (viodev->cmo.allocated) {
dev_err(&viodev->dev, "%s: device had %lu bytes of IO "
"allocated after remove operation.\n",
__func__, viodev->cmo.allocated);
BUG();
}
/*
* Remove the device from the device list being maintained for
* CMO enabled devices.
*/
list_for_each_entry(dev_ent, &vio_cmo.device_list, list)
if (viodev == dev_ent->viodev) {
list_del(&dev_ent->list);
kfree(dev_ent);
break;
}
/*
* Devices may not require any entitlement and they do not need
* to be processed. Otherwise, return the device's entitlement
* back to the pools.
*/
if (viodev->cmo.entitled) {
/*
* This device has not yet left the OF tree, it's
* minimum entitlement remains in vio_cmo.min and
* vio_cmo.desired
*/
vio_cmo.desired -= (viodev->cmo.desired - VIO_CMO_MIN_ENT);
/*
* Save min allocation for device in reserve as long
* as it exists in OF tree as determined by later
* balance operation
*/
viodev->cmo.entitled -= VIO_CMO_MIN_ENT;
/* Replenish spare from freed reserve pool */
if (viodev->cmo.entitled && (vio_cmo.spare < VIO_CMO_MIN_ENT)) {
tmp = min(viodev->cmo.entitled, (VIO_CMO_MIN_ENT -
vio_cmo.spare));
vio_cmo.spare += tmp;
viodev->cmo.entitled -= tmp;
}
/* Remaining reserve goes to excess pool */
vio_cmo.excess.size += viodev->cmo.entitled;
vio_cmo.excess.free += viodev->cmo.entitled;
vio_cmo.reserve.size -= viodev->cmo.entitled;
/*
* Until the device is removed it will keep a
* minimum entitlement; this will guarantee that
* a module unload/load will result in a success.
*/
viodev->cmo.entitled = VIO_CMO_MIN_ENT;
viodev->cmo.desired = VIO_CMO_MIN_ENT;
atomic_set(&viodev->cmo.allocs_failed, 0);
}
spin_unlock_irqrestore(&vio_cmo.lock, flags);
}
static void vio_cmo_set_dma_ops(struct vio_dev *viodev)
{
set_dma_ops(&viodev->dev, &vio_dma_mapping_ops);
powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-23 20:31:33 +02:00
}
/**
* vio_cmo_bus_init - CMO entitlement initialization at bus init time
*
* Set up the reserve and excess entitlement pools based on available
* system entitlement and the number of devices in the OF tree that
* require entitlement in the reserve pool.
*/
static void vio_cmo_bus_init(void)
{
struct hvcall_mpp_data mpp_data;
int err;
memset(&vio_cmo, 0, sizeof(struct vio_cmo));
spin_lock_init(&vio_cmo.lock);
INIT_LIST_HEAD(&vio_cmo.device_list);
INIT_DELAYED_WORK(&vio_cmo.balance_q, vio_cmo_balance);
/* Get current system entitlement */
err = h_get_mpp(&mpp_data);
/*
* On failure, continue with entitlement set to 0, will panic()
* later when spare is reserved.
*/
if (err != H_SUCCESS) {
printk(KERN_ERR "%s: unable to determine system IO "\
"entitlement. (%d)\n", __func__, err);
vio_cmo.entitled = 0;
} else {
vio_cmo.entitled = mpp_data.entitled_mem;
}
/* Set reservation and check against entitlement */
vio_cmo.spare = VIO_CMO_MIN_ENT;
vio_cmo.reserve.size = vio_cmo.spare;
vio_cmo.reserve.size += (vio_cmo_num_OF_devs() *
VIO_CMO_MIN_ENT);
if (vio_cmo.reserve.size > vio_cmo.entitled) {
printk(KERN_ERR "%s: insufficient system entitlement\n",
__func__);
panic("%s: Insufficient system entitlement", __func__);
}
/* Set the remaining accounting variables */
vio_cmo.excess.size = vio_cmo.entitled - vio_cmo.reserve.size;
vio_cmo.excess.free = vio_cmo.excess.size;
vio_cmo.min = vio_cmo.reserve.size;
vio_cmo.desired = vio_cmo.reserve.size;
}
/* sysfs device functions and data structures for CMO */
#define viodev_cmo_rd_attr(name) \
static ssize_t viodev_cmo_##name##_show(struct device *dev, \
struct device_attribute *attr, \
char *buf) \
{ \
return sprintf(buf, "%lu\n", to_vio_dev(dev)->cmo.name); \
}
static ssize_t viodev_cmo_allocs_failed_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct vio_dev *viodev = to_vio_dev(dev);
return sprintf(buf, "%d\n", atomic_read(&viodev->cmo.allocs_failed));
}
static ssize_t viodev_cmo_allocs_failed_reset(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct vio_dev *viodev = to_vio_dev(dev);
atomic_set(&viodev->cmo.allocs_failed, 0);
return count;
}
static ssize_t viodev_cmo_desired_set(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct vio_dev *viodev = to_vio_dev(dev);
size_t new_desired;
int ret;
ret = strict_strtoul(buf, 10, &new_desired);
if (ret)
return ret;
vio_cmo_set_dev_desired(viodev, new_desired);
return count;
}
viodev_cmo_rd_attr(desired);
viodev_cmo_rd_attr(entitled);
viodev_cmo_rd_attr(allocated);
static ssize_t name_show(struct device *, struct device_attribute *, char *);
static ssize_t devspec_show(struct device *, struct device_attribute *, char *);
static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
char *buf);
powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-23 20:31:33 +02:00
static struct device_attribute vio_cmo_dev_attrs[] = {
__ATTR_RO(name),
__ATTR_RO(devspec),
__ATTR_RO(modalias),
powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-23 20:31:33 +02:00
__ATTR(cmo_desired, S_IWUSR|S_IRUSR|S_IWGRP|S_IRGRP|S_IROTH,
viodev_cmo_desired_show, viodev_cmo_desired_set),
__ATTR(cmo_entitled, S_IRUGO, viodev_cmo_entitled_show, NULL),
__ATTR(cmo_allocated, S_IRUGO, viodev_cmo_allocated_show, NULL),
__ATTR(cmo_allocs_failed, S_IWUSR|S_IRUSR|S_IWGRP|S_IRGRP|S_IROTH,
viodev_cmo_allocs_failed_show, viodev_cmo_allocs_failed_reset),
__ATTR_NULL
};
/* sysfs bus functions and data structures for CMO */
#define viobus_cmo_rd_attr(name) \
static ssize_t cmo_##name##_show(struct bus_type *bt, char *buf) \
powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-23 20:31:33 +02:00
{ \
return sprintf(buf, "%lu\n", vio_cmo.name); \
} \
static BUS_ATTR_RO(cmo_##name)
powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-23 20:31:33 +02:00
#define viobus_cmo_pool_rd_attr(name, var) \
static ssize_t \
cmo_##name##_##var##_show(struct bus_type *bt, char *buf) \
powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-23 20:31:33 +02:00
{ \
return sprintf(buf, "%lu\n", vio_cmo.name.var); \
} \
static BUS_ATTR_RO(cmo_##name##_##var)
viobus_cmo_rd_attr(entitled);
viobus_cmo_rd_attr(spare);
viobus_cmo_rd_attr(min);
viobus_cmo_rd_attr(desired);
viobus_cmo_rd_attr(curr);
viobus_cmo_pool_rd_attr(reserve, size);
viobus_cmo_pool_rd_attr(excess, size);
viobus_cmo_pool_rd_attr(excess, free);
static ssize_t cmo_high_show(struct bus_type *bt, char *buf)
{
return sprintf(buf, "%lu\n", vio_cmo.high);
powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-23 20:31:33 +02:00
}
static ssize_t cmo_high_store(struct bus_type *bt, const char *buf,
size_t count)
powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-23 20:31:33 +02:00
{
unsigned long flags;
spin_lock_irqsave(&vio_cmo.lock, flags);
vio_cmo.high = vio_cmo.curr;
spin_unlock_irqrestore(&vio_cmo.lock, flags);
return count;
}
static BUS_ATTR_RW(cmo_high);
static struct attribute *vio_bus_attrs[] = {
&bus_attr_cmo_entitled.attr,
&bus_attr_cmo_spare.attr,
&bus_attr_cmo_min.attr,
&bus_attr_cmo_desired.attr,
&bus_attr_cmo_curr.attr,
&bus_attr_cmo_high.attr,
&bus_attr_cmo_reserve_size.attr,
&bus_attr_cmo_excess_size.attr,
&bus_attr_cmo_excess_free.attr,
NULL,
powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-23 20:31:33 +02:00
};
ATTRIBUTE_GROUPS(vio_bus);
powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-23 20:31:33 +02:00
static void vio_cmo_sysfs_init(void)
{
vio_bus_type.dev_attrs = vio_cmo_dev_attrs;
vio_bus_type.bus_groups = vio_bus_groups;
powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-23 20:31:33 +02:00
}
#else /* CONFIG_PPC_SMLPAR */
int vio_cmo_entitlement_update(size_t new_entitlement) { return 0; }
void vio_cmo_set_dev_desired(struct vio_dev *viodev, size_t desired) {}
static int vio_cmo_bus_probe(struct vio_dev *viodev) { return 0; }
static void vio_cmo_bus_remove(struct vio_dev *viodev) {}
static void vio_cmo_set_dma_ops(struct vio_dev *viodev) {}
static void vio_cmo_bus_init(void) {}
static void vio_cmo_sysfs_init(void) { }
powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-23 20:31:33 +02:00
#endif /* CONFIG_PPC_SMLPAR */
EXPORT_SYMBOL(vio_cmo_entitlement_update);
EXPORT_SYMBOL(vio_cmo_set_dev_desired);
/*
* Platform Facilities Option (PFO) support
*/
/**
* vio_h_cop_sync - Perform a synchronous PFO co-processor operation
*
* @vdev - Pointer to a struct vio_dev for device
* @op - Pointer to a struct vio_pfo_op for the operation parameters
*
* Calls the hypervisor to synchronously perform the PFO operation
* described in @op. In the case of a busy response from the hypervisor,
* the operation will be re-submitted indefinitely unless a non-zero timeout
* is specified or an error occurs. The timeout places a limit on when to
* stop re-submitting a operation, the total time can be exceeded if an
* operation is in progress.
*
* If op->hcall_ret is not NULL, this will be set to the return from the
* last h_cop_op call or it will be 0 if an error not involving the h_call
* was encountered.
*
* Returns:
* 0 on success,
* -EINVAL if the h_call fails due to an invalid parameter,
* -E2BIG if the h_call can not be performed synchronously,
* -EBUSY if a timeout is specified and has elapsed,
* -EACCES if the memory area for data/status has been rescinded, or
* -EPERM if a hardware fault has been indicated
*/
int vio_h_cop_sync(struct vio_dev *vdev, struct vio_pfo_op *op)
{
struct device *dev = &vdev->dev;
unsigned long deadline = 0;
long hret = 0;
int ret = 0;
if (op->timeout)
deadline = jiffies + msecs_to_jiffies(op->timeout);
while (true) {
hret = plpar_hcall_norets(H_COP, op->flags,
vdev->resource_id,
op->in, op->inlen, op->out,
op->outlen, op->csbcpb);
if (hret == H_SUCCESS ||
(hret != H_NOT_ENOUGH_RESOURCES &&
hret != H_BUSY && hret != H_RESOURCE) ||
(op->timeout && time_after(deadline, jiffies)))
break;
dev_dbg(dev, "%s: hcall ret(%ld), retrying.\n", __func__, hret);
}
switch (hret) {
case H_SUCCESS:
ret = 0;
break;
case H_OP_MODE:
case H_TOO_BIG:
ret = -E2BIG;
break;
case H_RESCINDED:
ret = -EACCES;
break;
case H_HARDWARE:
ret = -EPERM;
break;
case H_NOT_ENOUGH_RESOURCES:
case H_RESOURCE:
case H_BUSY:
ret = -EBUSY;
break;
default:
ret = -EINVAL;
break;
}
if (ret)
dev_dbg(dev, "%s: Sync h_cop_op failure (ret:%d) (hret:%ld)\n",
__func__, ret, hret);
op->hcall_err = hret;
return ret;
}
EXPORT_SYMBOL(vio_h_cop_sync);
static struct iommu_table *vio_build_iommu_table(struct vio_dev *dev)
{
const __be32 *dma_window;
struct iommu_table *tbl;
unsigned long offset, size;
dma_window = of_get_property(dev->dev.of_node,
"ibm,my-dma-window", NULL);
if (!dma_window)
return NULL;
tbl = kzalloc(sizeof(*tbl), GFP_KERNEL);
if (tbl == NULL)
return NULL;
of_parse_dma_window(dev->dev.of_node, dma_window,
&tbl->it_index, &offset, &size);
/* TCE table size - measured in tce entries */
tbl->it_size = size >> IOMMU_PAGE_SHIFT;
/* offset for VIO should always be 0 */
tbl->it_offset = offset >> IOMMU_PAGE_SHIFT;
tbl->it_busno = 0;
tbl->it_type = TCE_VB;
tbl->it_blocksize = 16;
return iommu_init_table(tbl, -1);
}
/**
* vio_match_device: - Tell if a VIO device has a matching
* VIO device id structure.
* @ids: array of VIO device id structures to search in
* @dev: the VIO device structure to match against
*
* Used by a driver to check whether a VIO device present in the
* system is in its list of supported devices. Returns the matching
* vio_device_id structure or NULL if there is no match.
*/
static const struct vio_device_id *vio_match_device(
const struct vio_device_id *ids, const struct vio_dev *dev)
{
while (ids->type[0] != '\0') {
if ((strncmp(dev->type, ids->type, strlen(ids->type)) == 0) &&
of_device_is_compatible(dev->dev.of_node,
ids->compat))
return ids;
ids++;
}
return NULL;
}
/*
* Convert from struct device to struct vio_dev and pass to driver.
* dev->driver has already been set by generic code because vio_bus_match
* succeeded.
*/
static int vio_bus_probe(struct device *dev)
{
struct vio_dev *viodev = to_vio_dev(dev);
struct vio_driver *viodrv = to_vio_driver(dev->driver);
const struct vio_device_id *id;
int error = -ENODEV;
if (!viodrv->probe)
return error;
id = vio_match_device(viodrv->id_table, viodev);
powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-23 20:31:33 +02:00
if (id) {
memset(&viodev->cmo, 0, sizeof(viodev->cmo));
if (firmware_has_feature(FW_FEATURE_CMO)) {
error = vio_cmo_bus_probe(viodev);
if (error)
return error;
}
error = viodrv->probe(viodev, id);
if (error && firmware_has_feature(FW_FEATURE_CMO))
powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-23 20:31:33 +02:00
vio_cmo_bus_remove(viodev);
}
return error;
}
/* convert from struct device to struct vio_dev and pass to driver. */
static int vio_bus_remove(struct device *dev)
{
struct vio_dev *viodev = to_vio_dev(dev);
struct vio_driver *viodrv = to_vio_driver(dev->driver);
powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-23 20:31:33 +02:00
struct device *devptr;
int ret = 1;
/*
* Hold a reference to the device after the remove function is called
* to allow for CMO accounting cleanup for the device.
*/
devptr = get_device(dev);
if (viodrv->remove)
powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-23 20:31:33 +02:00
ret = viodrv->remove(viodev);
powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-23 20:31:33 +02:00
if (!ret && firmware_has_feature(FW_FEATURE_CMO))
vio_cmo_bus_remove(viodev);
put_device(devptr);
return ret;
}
/**
* vio_register_driver: - Register a new vio driver
* @viodrv: The vio_driver structure to be registered.
*/
int __vio_register_driver(struct vio_driver *viodrv, struct module *owner,
const char *mod_name)
{
pr_debug("%s: driver %s registering\n", __func__, viodrv->name);
/* fill in 'struct driver' fields */
viodrv->driver.name = viodrv->name;
viodrv->driver.pm = viodrv->pm;
viodrv->driver.bus = &vio_bus_type;
viodrv->driver.owner = owner;
viodrv->driver.mod_name = mod_name;
return driver_register(&viodrv->driver);
}
EXPORT_SYMBOL(__vio_register_driver);
/**
* vio_unregister_driver - Remove registration of vio driver.
* @viodrv: The vio_driver struct to be removed form registration
*/
void vio_unregister_driver(struct vio_driver *viodrv)
{
driver_unregister(&viodrv->driver);
}
EXPORT_SYMBOL(vio_unregister_driver);
/* vio_dev refcount hit 0 */
static void vio_dev_release(struct device *dev)
{
struct iommu_table *tbl = get_iommu_table_base(dev);
if (tbl)
iommu_free_table(tbl, of_node_full_name(dev->of_node));
of_node_put(dev->of_node);
kfree(to_vio_dev(dev));
}
/**
* vio_register_device_node: - Register a new vio device.
* @of_node: The OF node for this device.
*
* Creates and initializes a vio_dev structure from the data in
* of_node and adds it to the list of virtual devices.
* Returns a pointer to the created vio_dev or NULL if node has
* NULL device_type or compatible fields.
*/
struct vio_dev *vio_register_device_node(struct device_node *of_node)
{
struct vio_dev *viodev;
struct device_node *parent_node;
const __be32 *prop;
enum vio_dev_family family;
const char *of_node_name = of_node->name ? of_node->name : "<unknown>";
/*
* Determine if this node is a under the /vdevice node or under the
* /ibm,platform-facilities node. This decides the device's family.
*/
parent_node = of_get_parent(of_node);
if (parent_node) {
if (!strcmp(parent_node->full_name, "/ibm,platform-facilities"))
family = PFO;
else if (!strcmp(parent_node->full_name, "/vdevice"))
family = VDEVICE;
else {
pr_warn("%s: parent(%s) of %s not recognized.\n",
__func__,
parent_node->full_name,
of_node_name);
of_node_put(parent_node);
return NULL;
}
of_node_put(parent_node);
} else {
pr_warn("%s: could not determine the parent of node %s.\n",
__func__, of_node_name);
return NULL;
}
if (family == PFO) {
if (of_get_property(of_node, "interrupt-controller", NULL)) {
pr_debug("%s: Skipping the interrupt controller %s.\n",
__func__, of_node_name);
return NULL;
}
}
/* allocate a vio_dev for this node */
viodev = kzalloc(sizeof(struct vio_dev), GFP_KERNEL);
if (viodev == NULL) {
pr_warn("%s: allocation failure for VIO device.\n", __func__);
return NULL;
}
/* we need the 'device_type' property, in order to match with drivers */
viodev->family = family;
if (viodev->family == VDEVICE) {
unsigned int unit_address;
if (of_node->type != NULL)
viodev->type = of_node->type;
else {
pr_warn("%s: node %s is missing the 'device_type' "
"property.\n", __func__, of_node_name);
goto out;
}
prop = of_get_property(of_node, "reg", NULL);
if (prop == NULL) {
pr_warn("%s: node %s missing 'reg'\n",
__func__, of_node_name);
goto out;
}
unit_address = of_read_number(prop, 1);
dev_set_name(&viodev->dev, "%x", unit_address);
viodev->irq = irq_of_parse_and_map(of_node, 0);
viodev->unit_address = unit_address;
} else {
/* PFO devices need their resource_id for submitting COP_OPs
* This is an optional field for devices, but is required when
* performing synchronous ops */
prop = of_get_property(of_node, "ibm,resource-id", NULL);
if (prop != NULL)
viodev->resource_id = of_read_number(prop, 1);
dev_set_name(&viodev->dev, "%s", of_node_name);
viodev->type = of_node_name;
viodev->irq = 0;
}
viodev->name = of_node->name;
viodev->dev.of_node = of_node_get(of_node);
powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-23 20:31:33 +02:00
set_dev_node(&viodev->dev, of_node_to_nid(of_node));
/* init generic 'struct device' fields: */
viodev->dev.parent = &vio_bus_device.dev;
viodev->dev.bus = &vio_bus_type;
viodev->dev.release = vio_dev_release;
if (of_get_property(viodev->dev.of_node, "ibm,my-dma-window", NULL)) {
if (firmware_has_feature(FW_FEATURE_CMO))
vio_cmo_set_dma_ops(viodev);
else
set_dma_ops(&viodev->dev, &dma_iommu_ops);
set_iommu_table_base(&viodev->dev,
vio_build_iommu_table(viodev));
/* needed to ensure proper operation of coherent allocations
* later, in case driver doesn't set it explicitly */
dma_coerce_mask_and_coherent(&viodev->dev, DMA_BIT_MASK(64));
}
/* register with generic device framework */
if (device_register(&viodev->dev)) {
printk(KERN_ERR "%s: failed to register device %s\n",
__func__, dev_name(&viodev->dev));
put_device(&viodev->dev);
return NULL;
}
return viodev;
out: /* Use this exit point for any return prior to device_register */
kfree(viodev);
return NULL;
}
EXPORT_SYMBOL(vio_register_device_node);
/*
* vio_bus_scan_for_devices - Scan OF and register each child device
* @root_name - OF node name for the root of the subtree to search.
* This must be non-NULL
*
* Starting from the root node provide, register the device node for
* each child beneath the root.
*/
static void vio_bus_scan_register_devices(char *root_name)
{
struct device_node *node_root, *node_child;
if (!root_name)
return;
node_root = of_find_node_by_name(NULL, root_name);
if (node_root) {
/*
* Create struct vio_devices for each virtual device in
* the device tree. Drivers will associate with them later.
*/
node_child = of_get_next_child(node_root, NULL);
while (node_child) {
vio_register_device_node(node_child);
node_child = of_get_next_child(node_root, node_child);
}
of_node_put(node_root);
}
}
/**
* vio_bus_init: - Initialize the virtual IO bus
*/
static int __init vio_bus_init(void)
{
int err;
powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-23 20:31:33 +02:00
if (firmware_has_feature(FW_FEATURE_CMO))
vio_cmo_sysfs_init();
err = bus_register(&vio_bus_type);
if (err) {
printk(KERN_ERR "failed to register VIO bus\n");
return err;
}
/*
* The fake parent of all vio devices, just to give us
* a nice directory
*/
err = device_register(&vio_bus_device.dev);
if (err) {
printk(KERN_WARNING "%s: device_register returned %i\n",
__func__, err);
return err;
}
powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-23 20:31:33 +02:00
if (firmware_has_feature(FW_FEATURE_CMO))
vio_cmo_bus_init();
return 0;
}
postcore_initcall(vio_bus_init);
static int __init vio_device_init(void)
{
vio_bus_scan_register_devices("vdevice");
vio_bus_scan_register_devices("ibm,platform-facilities");
return 0;
}
device_initcall(vio_device_init);
static ssize_t name_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
return sprintf(buf, "%s\n", to_vio_dev(dev)->name);
}
static ssize_t devspec_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct device_node *of_node = dev->of_node;
return sprintf(buf, "%s\n", of_node_full_name(of_node));
}
static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
const struct vio_dev *vio_dev = to_vio_dev(dev);
struct device_node *dn;
const char *cp;
dn = dev->of_node;
if (!dn) {
strcpy(buf, "\n");
return strlen(buf);
}
cp = of_get_property(dn, "compatible", NULL);
if (!cp) {
strcpy(buf, "\n");
return strlen(buf);
}
return sprintf(buf, "vio:T%sS%s\n", vio_dev->type, cp);
}
static struct device_attribute vio_dev_attrs[] = {
__ATTR_RO(name),
__ATTR_RO(devspec),
__ATTR_RO(modalias),
__ATTR_NULL
};
void vio_unregister_device(struct vio_dev *viodev)
{
device_unregister(&viodev->dev);
}
EXPORT_SYMBOL(vio_unregister_device);
static int vio_bus_match(struct device *dev, struct device_driver *drv)
{
const struct vio_dev *vio_dev = to_vio_dev(dev);
struct vio_driver *vio_drv = to_vio_driver(drv);
const struct vio_device_id *ids = vio_drv->id_table;
return (ids != NULL) && (vio_match_device(ids, vio_dev) != NULL);
}
static int vio_hotplug(struct device *dev, struct kobj_uevent_env *env)
{
const struct vio_dev *vio_dev = to_vio_dev(dev);
struct device_node *dn;
const char *cp;
dn = dev->of_node;
if (!dn)
return -ENODEV;
cp = of_get_property(dn, "compatible", NULL);
if (!cp)
return -ENODEV;
add_uevent_var(env, "MODALIAS=vio:T%sS%s", vio_dev->type, cp);
return 0;
}
struct bus_type vio_bus_type = {
.name = "vio",
.dev_attrs = vio_dev_attrs,
.uevent = vio_hotplug,
.match = vio_bus_match,
.probe = vio_bus_probe,
.remove = vio_bus_remove,
};
/**
* vio_get_attribute: - get attribute for virtual device
* @vdev: The vio device to get property.
* @which: The property/attribute to be extracted.
* @length: Pointer to length of returned data size (unused if NULL).
*
* Calls prom.c's of_get_property() to return the value of the
* attribute specified by @which
*/
const void *vio_get_attribute(struct vio_dev *vdev, char *which, int *length)
{
return of_get_property(vdev->dev.of_node, which, length);
}
EXPORT_SYMBOL(vio_get_attribute);
#ifdef CONFIG_PPC_PSERIES
/* vio_find_name() - internal because only vio.c knows how we formatted the
* kobject name
*/
static struct vio_dev *vio_find_name(const char *name)
{
struct device *found;
found = bus_find_device_by_name(&vio_bus_type, NULL, name);
if (!found)
return NULL;
return to_vio_dev(found);
}
/**
* vio_find_node - find an already-registered vio_dev
* @vnode: device_node of the virtual device we're looking for
*/
struct vio_dev *vio_find_node(struct device_node *vnode)
{
char kobj_name[20];
struct device_node *vnode_parent;
const char *dev_type;
vnode_parent = of_get_parent(vnode);
if (!vnode_parent)
return NULL;
dev_type = of_get_property(vnode_parent, "device_type", NULL);
of_node_put(vnode_parent);
if (!dev_type)
return NULL;
/* construct the kobject name from the device node */
if (!strcmp(dev_type, "vdevice")) {
const __be32 *prop;
prop = of_get_property(vnode, "reg", NULL);
if (!prop)
return NULL;
snprintf(kobj_name, sizeof(kobj_name), "%x",
(uint32_t)of_read_number(prop, 1));
} else if (!strcmp(dev_type, "ibm,platform-facilities"))
snprintf(kobj_name, sizeof(kobj_name), "%s", vnode->name);
else
return NULL;
return vio_find_name(kobj_name);
}
EXPORT_SYMBOL(vio_find_node);
int vio_enable_interrupts(struct vio_dev *dev)
{
int rc = h_vio_signal(dev->unit_address, VIO_IRQ_ENABLE);
if (rc != H_SUCCESS)
printk(KERN_ERR "vio: Error 0x%x enabling interrupts\n", rc);
return rc;
}
EXPORT_SYMBOL(vio_enable_interrupts);
int vio_disable_interrupts(struct vio_dev *dev)
{
int rc = h_vio_signal(dev->unit_address, VIO_IRQ_DISABLE);
if (rc != H_SUCCESS)
printk(KERN_ERR "vio: Error 0x%x disabling interrupts\n", rc);
return rc;
}
EXPORT_SYMBOL(vio_disable_interrupts);
#endif /* CONFIG_PPC_PSERIES */