linux/drivers/char/drm/Kconfig

106 lines
3.4 KiB
Plaintext
Raw Normal View History

#
# Drm device configuration
#
# This driver provides support for the
# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
#
config DRM
tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
depends on (AGP || AGP=n) && PCI
help
Kernel-level support for the Direct Rendering Infrastructure (DRI)
introduced in XFree86 4.0. If you say Y here, you need to select
the module that's right for your graphics card from the list below.
These modules provide support for synchronization, security, and
DMA transfers. Please see <http://dri.sourceforge.net/> for more
details. You should also select and configure AGP
(/dev/agpgart) support.
config DRM_TDFX
tristate "3dfx Banshee/Voodoo3+"
depends on DRM && PCI
help
Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
graphics card. If M is selected, the module will be called tdfx.
config DRM_R128
tristate "ATI Rage 128"
depends on DRM && PCI
help
Choose this option if you have an ATI Rage 128 graphics card. If M
is selected, the module will be called r128. AGP support for
this card is strongly suggested (unless you have a PCI version).
config DRM_RADEON
tristate "ATI Radeon"
depends on DRM && PCI
help
Choose this option if you have an ATI Radeon graphics card. There
are both PCI and AGP versions. You don't need to choose this to
run the Radeon in plain VGA mode.
If M is selected, the module will be called radeon.
config DRM_I810
tristate "Intel I810"
depends on DRM && AGP && AGP_INTEL
help
Choose this option if you have an Intel I810 graphics card. If M is
selected, the module will be called i810. AGP support is required
for this driver to work.
choice
prompt "Intel 830M, 845G, 852GM, 855GM, 865G"
depends on DRM && AGP && AGP_INTEL
optional
config DRM_I830
tristate "i830 driver"
help
Choose this option if you have a system that has Intel 830M, 845G,
852GM, 855GM or 865G integrated graphics. If M is selected, the
module will be called i830. AGP support is required for this driver
to work. This driver will eventually be replaced by the i915 one.
config DRM_I915
tristate "i915 driver"
help
Choose this option if you have a system that has Intel 830M, 845G,
852GM, 855GM 865G or 915G integrated graphics. If M is selected, the
module will be called i915. AGP support is required for this driver
to work. This driver will eventually replace the I830 driver, when
later release of X start to use the new DDX and DRI.
endchoice
config DRM_MGA
tristate "Matrox g200/g400"
Add support for PCI MGA cards to MGA DRM. This patch adds serveral new ioctls and a new query to get_param query to support PCI MGA cards. Two ioctls were added to implement interrupt based waiting. With this change, the client-side driver no longer needs to map the primary DMA region or the MMIO region. Previously, end-of-frame waiting was done by busy waiting in the client-side driver until one of the MMIO registers (the current DMA pointer) matched a pointer to the end of primary DMA space. By using interrupts, the busy waiting and the extra mappings are removed. A third ioctl was added to bootstrap DMA. This ioctl, which is used by the X-server, moves a *LOT* of code from the X-server into the kernel. This allows the kernel to do whatever needs to be done to setup DMA buffers. The entire process and the locations of the buffers are hidden from user-mode. Additionally, a get_param query was added to differentiate between G4x0 cards and G550 cards. A gap was left in the numbering sequence so that, if needed, G450 cards could be distinguished from G400 cards. According to Ville Syrjälä, the G4x0 cards and the G550 cards handle anisotropic filtering differently. This seems the most compatible way to let the client-side driver know which card it's own. Doing this very small change now eliminates the need to bump the DRM minor version twice. http://marc.theaimsgroup.com/?l=dri-devel&m=106625815319773&w=2 (airlied - this may not work at this point, I think the follow on buffer cleanup patches will be needed) From: Ian Romanick <idr@us.ibm.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2005-07-10 10:20:09 +02:00
depends on DRM
help
Choose this option if you have a Matrox G200, G400 or G450 graphics
card. If M is selected, the module will be called mga. AGP
support is required for this driver to work.
config DRM_SIS
tristate "SiS video cards"
depends on DRM && AGP
help
Choose this option if you have a SiS 630 or compatible video
chipset. If M is selected the module will be called sis. AGP
support is required for this driver to work.
config DRM_VIA
tristate "Via unichrome video cards"
depends on DRM
help
Choose this option if you have a Via unichrome or compatible video
chipset. If M is selected the module will be called via.
config DRM_SAVAGE
tristate "Savage video cards"
depends on DRM
help
Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
chipset. If M is selected the module will be called savage.