linux/drivers/net/wireless/hostap/hostap_cs.c

726 lines
18 KiB
C
Raw Normal View History

#define PRISM2_PCCARD
#include <linux/module.h>
#include <linux/init.h>
#include <linux/if.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 09:04:11 +01:00
#include <linux/slab.h>
#include <linux/wait.h>
#include <linux/timer.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/workqueue.h>
#include <linux/wireless.h>
#include <net/iw_handler.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/ds.h>
#include <asm/io.h>
#include "hostap_wlan.h"
static char *dev_info = "hostap_cs";
MODULE_AUTHOR("Jouni Malinen");
MODULE_DESCRIPTION("Support for Intersil Prism2-based 802.11 wireless LAN "
"cards (PC Card).");
MODULE_SUPPORTED_DEVICE("Intersil Prism2-based WLAN cards (PC Card)");
MODULE_LICENSE("GPL");
static int ignore_cis_vcc;
module_param(ignore_cis_vcc, int, 0444);
MODULE_PARM_DESC(ignore_cis_vcc, "Ignore broken CIS VCC entry");
/* struct local_info::hw_priv */
struct hostap_cs_priv {
struct pcmcia_device *link;
int sandisk_connectplus;
};
#ifdef PRISM2_IO_DEBUG
static inline void hfa384x_outb_debug(struct net_device *dev, int a, u8 v)
{
struct hostap_interface *iface;
local_info_t *local;
unsigned long flags;
iface = netdev_priv(dev);
local = iface->local;
spin_lock_irqsave(&local->lock, flags);
prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTB, a, v);
outb(v, dev->base_addr + a);
spin_unlock_irqrestore(&local->lock, flags);
}
static inline u8 hfa384x_inb_debug(struct net_device *dev, int a)
{
struct hostap_interface *iface;
local_info_t *local;
unsigned long flags;
u8 v;
iface = netdev_priv(dev);
local = iface->local;
spin_lock_irqsave(&local->lock, flags);
v = inb(dev->base_addr + a);
prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INB, a, v);
spin_unlock_irqrestore(&local->lock, flags);
return v;
}
static inline void hfa384x_outw_debug(struct net_device *dev, int a, u16 v)
{
struct hostap_interface *iface;
local_info_t *local;
unsigned long flags;
iface = netdev_priv(dev);
local = iface->local;
spin_lock_irqsave(&local->lock, flags);
prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTW, a, v);
outw(v, dev->base_addr + a);
spin_unlock_irqrestore(&local->lock, flags);
}
static inline u16 hfa384x_inw_debug(struct net_device *dev, int a)
{
struct hostap_interface *iface;
local_info_t *local;
unsigned long flags;
u16 v;
iface = netdev_priv(dev);
local = iface->local;
spin_lock_irqsave(&local->lock, flags);
v = inw(dev->base_addr + a);
prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INW, a, v);
spin_unlock_irqrestore(&local->lock, flags);
return v;
}
static inline void hfa384x_outsw_debug(struct net_device *dev, int a,
u8 *buf, int wc)
{
struct hostap_interface *iface;
local_info_t *local;
unsigned long flags;
iface = netdev_priv(dev);
local = iface->local;
spin_lock_irqsave(&local->lock, flags);
prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTSW, a, wc);
outsw(dev->base_addr + a, buf, wc);
spin_unlock_irqrestore(&local->lock, flags);
}
static inline void hfa384x_insw_debug(struct net_device *dev, int a,
u8 *buf, int wc)
{
struct hostap_interface *iface;
local_info_t *local;
unsigned long flags;
iface = netdev_priv(dev);
local = iface->local;
spin_lock_irqsave(&local->lock, flags);
prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INSW, a, wc);
insw(dev->base_addr + a, buf, wc);
spin_unlock_irqrestore(&local->lock, flags);
}
#define HFA384X_OUTB(v,a) hfa384x_outb_debug(dev, (a), (v))
#define HFA384X_INB(a) hfa384x_inb_debug(dev, (a))
#define HFA384X_OUTW(v,a) hfa384x_outw_debug(dev, (a), (v))
#define HFA384X_INW(a) hfa384x_inw_debug(dev, (a))
#define HFA384X_OUTSW(a, buf, wc) hfa384x_outsw_debug(dev, (a), (buf), (wc))
#define HFA384X_INSW(a, buf, wc) hfa384x_insw_debug(dev, (a), (buf), (wc))
#else /* PRISM2_IO_DEBUG */
#define HFA384X_OUTB(v,a) outb((v), dev->base_addr + (a))
#define HFA384X_INB(a) inb(dev->base_addr + (a))
#define HFA384X_OUTW(v,a) outw((v), dev->base_addr + (a))
#define HFA384X_INW(a) inw(dev->base_addr + (a))
#define HFA384X_INSW(a, buf, wc) insw(dev->base_addr + (a), buf, wc)
#define HFA384X_OUTSW(a, buf, wc) outsw(dev->base_addr + (a), buf, wc)
#endif /* PRISM2_IO_DEBUG */
static int hfa384x_from_bap(struct net_device *dev, u16 bap, void *buf,
int len)
{
u16 d_off;
u16 *pos;
d_off = (bap == 1) ? HFA384X_DATA1_OFF : HFA384X_DATA0_OFF;
pos = (u16 *) buf;
if (len / 2)
HFA384X_INSW(d_off, buf, len / 2);
pos += len / 2;
if (len & 1)
*((char *) pos) = HFA384X_INB(d_off);
return 0;
}
static int hfa384x_to_bap(struct net_device *dev, u16 bap, void *buf, int len)
{
u16 d_off;
u16 *pos;
d_off = (bap == 1) ? HFA384X_DATA1_OFF : HFA384X_DATA0_OFF;
pos = (u16 *) buf;
if (len / 2)
HFA384X_OUTSW(d_off, buf, len / 2);
pos += len / 2;
if (len & 1)
HFA384X_OUTB(*((char *) pos), d_off);
return 0;
}
/* FIX: This might change at some point.. */
#include "hostap_hw.c"
static void prism2_detach(struct pcmcia_device *p_dev);
static void prism2_release(u_long arg);
static int prism2_config(struct pcmcia_device *link);
static int prism2_pccard_card_present(local_info_t *local)
{
struct hostap_cs_priv *hw_priv = local->hw_priv;
if (hw_priv != NULL && hw_priv->link != NULL && pcmcia_dev_present(hw_priv->link))
return 1;
return 0;
}
/*
* SanDisk CompactFlash WLAN Flashcard - Product Manual v1.0
* Document No. 20-10-00058, January 2004
* http://www.sandisk.com/pdf/industrial/ProdManualCFWLANv1.0.pdf
*/
#define SANDISK_WLAN_ACTIVATION_OFF 0x40
#define SANDISK_HCR_OFF 0x42
static void sandisk_set_iobase(local_info_t *local)
{
int res;
struct hostap_cs_priv *hw_priv = local->hw_priv;
res = pcmcia_write_config_byte(hw_priv->link, 0x10,
hw_priv->link->resource[0]->start & 0x00ff);
if (res != 0) {
printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 0 -"
" res=%d\n", res);
}
udelay(10);
res = pcmcia_write_config_byte(hw_priv->link, 0x12,
(hw_priv->link->resource[0]->start >> 8) & 0x00ff);
if (res != 0) {
printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 1 -"
" res=%d\n", res);
}
}
static void sandisk_write_hcr(local_info_t *local, int hcr)
{
struct net_device *dev = local->dev;
int i;
HFA384X_OUTB(0x80, SANDISK_WLAN_ACTIVATION_OFF);
udelay(50);
for (i = 0; i < 10; i++) {
HFA384X_OUTB(hcr, SANDISK_HCR_OFF);
}
udelay(55);
HFA384X_OUTB(0x45, SANDISK_WLAN_ACTIVATION_OFF);
}
static int sandisk_enable_wireless(struct net_device *dev)
{
int res, ret = 0;
struct hostap_interface *iface = netdev_priv(dev);
local_info_t *local = iface->local;
struct hostap_cs_priv *hw_priv = local->hw_priv;
if (resource_size(hw_priv->link->resource[0]) < 0x42) {
/* Not enough ports to be SanDisk multi-function card */
ret = -ENODEV;
goto done;
}
if (hw_priv->link->manf_id != 0xd601 || hw_priv->link->card_id != 0x0101) {
/* No SanDisk manfid found */
ret = -ENODEV;
goto done;
}
if (hw_priv->link->socket->functions < 2) {
/* No multi-function links found */
ret = -ENODEV;
goto done;
}
printk(KERN_DEBUG "%s: Multi-function SanDisk ConnectPlus detected"
" - using vendor-specific initialization\n", dev->name);
hw_priv->sandisk_connectplus = 1;
res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR,
COR_SOFT_RESET);
if (res != 0) {
printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n",
dev->name, res);
goto done;
}
mdelay(5);
/*
* Do not enable interrupts here to avoid some bogus events. Interrupts
* will be enabled during the first cor_sreset call.
*/
res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR,
(COR_LEVEL_REQ | 0x8 | COR_ADDR_DECODE |
COR_FUNC_ENA));
if (res != 0) {
printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n",
dev->name, res);
goto done;
}
mdelay(5);
sandisk_set_iobase(local);
HFA384X_OUTB(0xc5, SANDISK_WLAN_ACTIVATION_OFF);
udelay(10);
HFA384X_OUTB(0x4b, SANDISK_WLAN_ACTIVATION_OFF);
udelay(10);
done:
return ret;
}
static void prism2_pccard_cor_sreset(local_info_t *local)
{
int res;
u8 val;
struct hostap_cs_priv *hw_priv = local->hw_priv;
if (!prism2_pccard_card_present(local))
return;
res = pcmcia_read_config_byte(hw_priv->link, CISREG_COR, &val);
if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 1 (%d)\n",
res);
return;
}
printk(KERN_DEBUG "prism2_pccard_cor_sreset: original COR %02x\n",
val);
val |= COR_SOFT_RESET;
res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR, val);
if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 2 (%d)\n",
res);
return;
}
mdelay(hw_priv->sandisk_connectplus ? 5 : 2);
val &= ~COR_SOFT_RESET;
if (hw_priv->sandisk_connectplus)
val |= COR_IREQ_ENA;
res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR, val);
if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 3 (%d)\n",
res);
return;
}
mdelay(hw_priv->sandisk_connectplus ? 5 : 2);
if (hw_priv->sandisk_connectplus)
sandisk_set_iobase(local);
}
static void prism2_pccard_genesis_reset(local_info_t *local, int hcr)
{
int res;
u8 old_cor;
struct hostap_cs_priv *hw_priv = local->hw_priv;
if (!prism2_pccard_card_present(local))
return;
if (hw_priv->sandisk_connectplus) {
sandisk_write_hcr(local, hcr);
return;
}
res = pcmcia_read_config_byte(hw_priv->link, CISREG_COR, &old_cor);
if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 1 "
"(%d)\n", res);
return;
}
printk(KERN_DEBUG "prism2_pccard_genesis_sreset: original COR %02x\n",
old_cor);
res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR,
old_cor | COR_SOFT_RESET);
if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 2 "
"(%d)\n", res);
return;
}
mdelay(10);
/* Setup Genesis mode */
res = pcmcia_write_config_byte(hw_priv->link, CISREG_CCSR, hcr);
if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 3 "
"(%d)\n", res);
return;
}
mdelay(10);
res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR,
old_cor & ~COR_SOFT_RESET);
if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 4 "
"(%d)\n", res);
return;
}
mdelay(10);
}
static struct prism2_helper_functions prism2_pccard_funcs =
{
.card_present = prism2_pccard_card_present,
.cor_sreset = prism2_pccard_cor_sreset,
.genesis_reset = prism2_pccard_genesis_reset,
.hw_type = HOSTAP_HW_PCCARD,
};
/* allocate local data and register with CardServices
* initialize dev_link structure, but do not configure the card yet */
static int hostap_cs_probe(struct pcmcia_device *p_dev)
{
int ret;
PDEBUG(DEBUG_HW, "%s: setting Vcc=33 (constant)\n", dev_info);
ret = prism2_config(p_dev);
if (ret) {
PDEBUG(DEBUG_EXTRA, "prism2_config() failed\n");
}
return ret;
}
static void prism2_detach(struct pcmcia_device *link)
{
PDEBUG(DEBUG_FLOW, "prism2_detach\n");
prism2_release((u_long)link);
/* release net devices */
if (link->priv) {
struct hostap_cs_priv *hw_priv;
struct net_device *dev;
struct hostap_interface *iface;
dev = link->priv;
iface = netdev_priv(dev);
hw_priv = iface->local->hw_priv;
prism2_free_local_data(dev);
kfree(hw_priv);
}
}
static int prism2_config_check(struct pcmcia_device *p_dev, void *priv_data)
{
if (p_dev->config_index == 0)
return -EINVAL;
return pcmcia_request_io(p_dev);
}
static int prism2_config(struct pcmcia_device *link)
{
struct net_device *dev;
struct hostap_interface *iface;
local_info_t *local;
int ret = 1;
struct hostap_cs_priv *hw_priv;
unsigned long flags;
PDEBUG(DEBUG_FLOW, "prism2_config()\n");
hw_priv = kzalloc(sizeof(*hw_priv), GFP_KERNEL);
if (hw_priv == NULL) {
ret = -ENOMEM;
goto failed;
}
/* Look for an appropriate configuration table entry in the CIS */
link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_AUDIO |
CONF_AUTO_CHECK_VCC | CONF_AUTO_SET_IO | CONF_ENABLE_IRQ;
if (ignore_cis_vcc)
link->config_flags &= ~CONF_AUTO_CHECK_VCC;
ret = pcmcia_loop_config(link, prism2_config_check, NULL);
if (ret) {
if (!ignore_cis_vcc)
printk(KERN_ERR "GetNextTuple(): No matching "
"CIS configuration. Maybe you need the "
"ignore_cis_vcc=1 parameter.\n");
goto failed;
}
/* Need to allocate net_device before requesting IRQ handler */
dev = prism2_init_local_data(&prism2_pccard_funcs, 0,
&link->dev);
if (dev == NULL)
goto failed;
link->priv = dev;
iface = netdev_priv(dev);
local = iface->local;
local->hw_priv = hw_priv;
hw_priv->link = link;
/*
* We enable IRQ here, but IRQ handler will not proceed
* until dev->base_addr is set below. This protect us from
* receive interrupts when driver is not initialized.
*/
ret = pcmcia_request_irq(link, prism2_interrupt);
if (ret)
goto failed;
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
spin_lock_irqsave(&local->irq_init_lock, flags);
dev->irq = link->irq;
dev->base_addr = link->resource[0]->start;
spin_unlock_irqrestore(&local->irq_init_lock, flags);
local->shutdown = 0;
sandisk_enable_wireless(dev);
ret = prism2_hw_config(dev, 1);
if (!ret)
ret = hostap_hw_ready(dev);
return ret;
failed:
kfree(hw_priv);
prism2_release((u_long)link);
return ret;
}
static void prism2_release(u_long arg)
{
struct pcmcia_device *link = (struct pcmcia_device *)arg;
PDEBUG(DEBUG_FLOW, "prism2_release\n");
if (link->priv) {
struct net_device *dev = link->priv;
struct hostap_interface *iface;
iface = netdev_priv(dev);
prism2_hw_shutdown(dev, 0);
iface->local->shutdown = 1;
}
pcmcia_disable_device(link);
PDEBUG(DEBUG_FLOW, "release - done\n");
}
static int hostap_cs_suspend(struct pcmcia_device *link)
{
struct net_device *dev = (struct net_device *) link->priv;
int dev_open = 0;
struct hostap_interface *iface = NULL;
if (!dev)
return -ENODEV;
iface = netdev_priv(dev);
PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_PM_SUSPEND\n", dev_info);
if (iface && iface->local)
dev_open = iface->local->num_dev_open > 0;
if (dev_open) {
netif_stop_queue(dev);
netif_device_detach(dev);
}
prism2_suspend(dev);
return 0;
}
static int hostap_cs_resume(struct pcmcia_device *link)
{
struct net_device *dev = (struct net_device *) link->priv;
int dev_open = 0;
struct hostap_interface *iface = NULL;
if (!dev)
return -ENODEV;
iface = netdev_priv(dev);
PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_PM_RESUME\n", dev_info);
if (iface && iface->local)
dev_open = iface->local->num_dev_open > 0;
prism2_hw_shutdown(dev, 1);
prism2_hw_config(dev, dev_open ? 0 : 1);
if (dev_open) {
netif_device_attach(dev);
netif_start_queue(dev);
}
return 0;
}
static const struct pcmcia_device_id hostap_cs_ids[] = {
PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100),
PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300),
PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777),
PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000),
PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002),
PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x3301),
PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002),
PCMCIA_DEVICE_MANF_CARD(0x026f, 0x030b),
PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612),
PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613),
PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002),
PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002),
PCMCIA_DEVICE_MANF_CARD(0x02d2, 0x0001),
PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x0001),
PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300),
/* PCMCIA_DEVICE_MANF_CARD(0xc00f, 0x0000), conflict with pcnet_cs */
PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002),
PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002),
PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005),
PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0010),
PCMCIA_DEVICE_MANF_CARD(0x0126, 0x0002),
PCMCIA_DEVICE_MANF_CARD_PROD_ID1(0xd601, 0x0005, "ADLINK 345 CF",
0x2d858104),
PCMCIA_DEVICE_MANF_CARD_PROD_ID1(0x0156, 0x0002, "INTERSIL",
0x74c5e40d),
PCMCIA_DEVICE_MANF_CARD_PROD_ID1(0x0156, 0x0002, "Intersil",
0x4b801a17),
PCMCIA_DEVICE_MANF_CARD_PROD_ID3(0x0156, 0x0002, "Version 01.02",
0x4b74baa0),
PCMCIA_MFC_DEVICE_PROD_ID12(0, "SanDisk", "ConnectPlus",
0x7a954bd9, 0x74be00c6),
PCMCIA_DEVICE_PROD_ID123(
"Addtron", "AWP-100 Wireless PCMCIA", "Version 01.02",
0xe6ec52ce, 0x08649af2, 0x4b74baa0),
PCMCIA_DEVICE_PROD_ID123(
"Canon", "Wireless LAN CF Card K30225", "Version 01.00",
0x96ef6fe2, 0x263fcbab, 0xa57adb8c),
PCMCIA_DEVICE_PROD_ID123(
"D", "Link DWL-650 11Mbps WLAN Card", "Version 01.02",
0x71b18589, 0xb6f1b0ab, 0x4b74baa0),
PCMCIA_DEVICE_PROD_ID123(
"Instant Wireless ", " Network PC CARD", "Version 01.02",
0x11d901af, 0x6e9bd926, 0x4b74baa0),
PCMCIA_DEVICE_PROD_ID123(
"SMC", "SMC2632W", "Version 01.02",
0xc4f8b18b, 0x474a1f2a, 0x4b74baa0),
PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-CF-S11G",
0x2decece3, 0x82067c18),
PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card",
0x54f7c49c, 0x15a75e5b),
PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE",
0x74c5e40d, 0xdb472a18),
PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card",
0x0733cc81, 0x0c52f395),
PCMCIA_DEVICE_PROD_ID12(
"ZoomAir 11Mbps High", "Rate wireless Networking",
0x273fe3db, 0x32a1eaee),
PCMCIA_DEVICE_PROD_ID123(
"Pretec", "CompactWLAN Card 802.11b", "2.5",
0x1cadd3e5, 0xe697636c, 0x7a5bfcf1),
PCMCIA_DEVICE_PROD_ID123(
"U.S. Robotics", "IEEE 802.11b PC-CARD", "Version 01.02",
0xc7b8df9d, 0x1700d087, 0x4b74baa0),
PCMCIA_DEVICE_PROD_ID123(
"Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio",
"Ver. 1.00",
0x5cd01705, 0x4271660f, 0x9d08ee12),
PCMCIA_DEVICE_PROD_ID123(
"Wireless LAN" , "11Mbps PC Card", "Version 01.02",
0x4b8870ff, 0x70e946d1, 0x4b74baa0),
PCMCIA_DEVICE_PROD_ID3("HFA3863", 0x355cb092),
PCMCIA_DEVICE_PROD_ID3("ISL37100P", 0x630d52b2),
PCMCIA_DEVICE_PROD_ID3("ISL37101P-10", 0xdd97a26b),
PCMCIA_DEVICE_PROD_ID3("ISL37300P", 0xc9049a39),
PCMCIA_DEVICE_NULL
};
MODULE_DEVICE_TABLE(pcmcia, hostap_cs_ids);
static struct pcmcia_driver hostap_driver = {
.name = "hostap_cs",
.probe = hostap_cs_probe,
.remove = prism2_detach,
.owner = THIS_MODULE,
.id_table = hostap_cs_ids,
.suspend = hostap_cs_suspend,
.resume = hostap_cs_resume,
};
static int __init init_prism2_pccard(void)
{
return pcmcia_register_driver(&hostap_driver);
}
static void __exit exit_prism2_pccard(void)
{
pcmcia_unregister_driver(&hostap_driver);
}
module_init(init_prism2_pccard);
module_exit(exit_prism2_pccard);