linux/drivers/media/pci/saa7164/saa7164-fw.c

614 lines
16 KiB
C
Raw Normal View History

/*
* Driver for the NXP SAA7164 PCIe bridge
*
* Copyright (c) 2010 Steven Toth <stoth@kernellabs.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
*
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/firmware.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 09:04:11 +01:00
#include <linux/slab.h>
#include "saa7164.h"
#define SAA7164_REV2_FIRMWARE "NXP7164-2010-03-10.1.fw"
#define SAA7164_REV2_FIRMWARE_SIZE 4019072
#define SAA7164_REV3_FIRMWARE "NXP7164-2010-03-10.1.fw"
#define SAA7164_REV3_FIRMWARE_SIZE 4019072
struct fw_header {
u32 firmwaresize;
u32 bslsize;
u32 reserved;
u32 version;
};
[media] saa7164: get rid of warning: no previous prototype drivers/media/pci/saa7164/saa7164-api.c:1489:5: warning: no previous prototype for 'saa7164_api_modify_gpio' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-api.c:168:5: warning: no previous prototype for 'saa7164_api_set_gop_size' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-api.c:622:5: warning: no previous prototype for 'saa7164_api_set_dif' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-api.c:825:5: warning: no previous prototype for 'saa7164_api_configure_port_vbi' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-api.c:861:5: warning: no previous prototype for 'saa7164_api_configure_port_mpeg2ts' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-api.c:895:5: warning: no previous prototype for 'saa7164_api_configure_port_mpeg2ps' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-api.c:928:5: warning: no previous prototype for 'saa7164_api_dump_subdevs' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-bus.c:109:6: warning: no previous prototype for 'saa7164_bus_dumpmsg' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-bus.c:84:6: warning: no previous prototype for 'saa7164_bus_verify' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-cmd.c:135:5: warning: no previous prototype for 'saa7164_cmd_dequeue' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-cmd.c:189:5: warning: no previous prototype for 'saa7164_cmd_set' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-cmd.c:262:5: warning: no previous prototype for 'saa7164_cmd_wait' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-cmd.c:26:5: warning: no previous prototype for 'saa7164_cmd_alloc_seqno' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-cmd.c:45:6: warning: no previous prototype for 'saa7164_cmd_free_seqno' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-cmd.c:57:6: warning: no previous prototype for 'saa7164_cmd_timeout_seqno' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-cmd.c:67:5: warning: no previous prototype for 'saa7164_cmd_timeout_get' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-encoder.c:1104:29: warning: no previous prototype for 'saa7164_enc_next_buf' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-encoder.c:1290:5: warning: no previous prototype for 'saa7164_g_chip_ident' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-encoder.c:1300:5: warning: no previous prototype for 'saa7164_g_register' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-encoder.c:1313:5: warning: no previous prototype for 'saa7164_s_register' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-fw.c:40:5: warning: no previous prototype for 'saa7164_dl_wait_ack' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-fw.c:56:5: warning: no previous prototype for 'saa7164_dl_wait_clr' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-fw.c:74:5: warning: no previous prototype for 'saa7164_downloadimage' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-vbi.c:1050:29: warning: no previous prototype for 'saa7164_vbi_next_buf' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-vbi.c:987:5: warning: no previous prototype for 'saa7164_vbi_fmt' [-Wmissing-prototypes] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-27 18:11:11 +02:00
static int saa7164_dl_wait_ack(struct saa7164_dev *dev, u32 reg)
{
u32 timeout = SAA_DEVICE_TIMEOUT;
while ((saa7164_readl(reg) & 0x01) == 0) {
timeout -= 10;
if (timeout == 0) {
printk(KERN_ERR "%s() timeout (no d/l ack)\n",
__func__);
return -EBUSY;
}
msleep(100);
}
return 0;
}
[media] saa7164: get rid of warning: no previous prototype drivers/media/pci/saa7164/saa7164-api.c:1489:5: warning: no previous prototype for 'saa7164_api_modify_gpio' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-api.c:168:5: warning: no previous prototype for 'saa7164_api_set_gop_size' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-api.c:622:5: warning: no previous prototype for 'saa7164_api_set_dif' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-api.c:825:5: warning: no previous prototype for 'saa7164_api_configure_port_vbi' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-api.c:861:5: warning: no previous prototype for 'saa7164_api_configure_port_mpeg2ts' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-api.c:895:5: warning: no previous prototype for 'saa7164_api_configure_port_mpeg2ps' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-api.c:928:5: warning: no previous prototype for 'saa7164_api_dump_subdevs' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-bus.c:109:6: warning: no previous prototype for 'saa7164_bus_dumpmsg' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-bus.c:84:6: warning: no previous prototype for 'saa7164_bus_verify' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-cmd.c:135:5: warning: no previous prototype for 'saa7164_cmd_dequeue' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-cmd.c:189:5: warning: no previous prototype for 'saa7164_cmd_set' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-cmd.c:262:5: warning: no previous prototype for 'saa7164_cmd_wait' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-cmd.c:26:5: warning: no previous prototype for 'saa7164_cmd_alloc_seqno' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-cmd.c:45:6: warning: no previous prototype for 'saa7164_cmd_free_seqno' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-cmd.c:57:6: warning: no previous prototype for 'saa7164_cmd_timeout_seqno' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-cmd.c:67:5: warning: no previous prototype for 'saa7164_cmd_timeout_get' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-encoder.c:1104:29: warning: no previous prototype for 'saa7164_enc_next_buf' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-encoder.c:1290:5: warning: no previous prototype for 'saa7164_g_chip_ident' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-encoder.c:1300:5: warning: no previous prototype for 'saa7164_g_register' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-encoder.c:1313:5: warning: no previous prototype for 'saa7164_s_register' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-fw.c:40:5: warning: no previous prototype for 'saa7164_dl_wait_ack' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-fw.c:56:5: warning: no previous prototype for 'saa7164_dl_wait_clr' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-fw.c:74:5: warning: no previous prototype for 'saa7164_downloadimage' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-vbi.c:1050:29: warning: no previous prototype for 'saa7164_vbi_next_buf' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-vbi.c:987:5: warning: no previous prototype for 'saa7164_vbi_fmt' [-Wmissing-prototypes] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-27 18:11:11 +02:00
static int saa7164_dl_wait_clr(struct saa7164_dev *dev, u32 reg)
{
u32 timeout = SAA_DEVICE_TIMEOUT;
while (saa7164_readl(reg) & 0x01) {
timeout -= 10;
if (timeout == 0) {
printk(KERN_ERR "%s() timeout (no d/l clr)\n",
__func__);
return -EBUSY;
}
msleep(100);
}
return 0;
}
/* TODO: move dlflags into dev-> and change to write/readl/b */
/* TODO: Excessive levels of debug */
[media] saa7164: get rid of warning: no previous prototype drivers/media/pci/saa7164/saa7164-api.c:1489:5: warning: no previous prototype for 'saa7164_api_modify_gpio' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-api.c:168:5: warning: no previous prototype for 'saa7164_api_set_gop_size' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-api.c:622:5: warning: no previous prototype for 'saa7164_api_set_dif' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-api.c:825:5: warning: no previous prototype for 'saa7164_api_configure_port_vbi' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-api.c:861:5: warning: no previous prototype for 'saa7164_api_configure_port_mpeg2ts' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-api.c:895:5: warning: no previous prototype for 'saa7164_api_configure_port_mpeg2ps' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-api.c:928:5: warning: no previous prototype for 'saa7164_api_dump_subdevs' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-bus.c:109:6: warning: no previous prototype for 'saa7164_bus_dumpmsg' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-bus.c:84:6: warning: no previous prototype for 'saa7164_bus_verify' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-cmd.c:135:5: warning: no previous prototype for 'saa7164_cmd_dequeue' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-cmd.c:189:5: warning: no previous prototype for 'saa7164_cmd_set' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-cmd.c:262:5: warning: no previous prototype for 'saa7164_cmd_wait' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-cmd.c:26:5: warning: no previous prototype for 'saa7164_cmd_alloc_seqno' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-cmd.c:45:6: warning: no previous prototype for 'saa7164_cmd_free_seqno' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-cmd.c:57:6: warning: no previous prototype for 'saa7164_cmd_timeout_seqno' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-cmd.c:67:5: warning: no previous prototype for 'saa7164_cmd_timeout_get' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-encoder.c:1104:29: warning: no previous prototype for 'saa7164_enc_next_buf' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-encoder.c:1290:5: warning: no previous prototype for 'saa7164_g_chip_ident' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-encoder.c:1300:5: warning: no previous prototype for 'saa7164_g_register' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-encoder.c:1313:5: warning: no previous prototype for 'saa7164_s_register' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-fw.c:40:5: warning: no previous prototype for 'saa7164_dl_wait_ack' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-fw.c:56:5: warning: no previous prototype for 'saa7164_dl_wait_clr' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-fw.c:74:5: warning: no previous prototype for 'saa7164_downloadimage' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-vbi.c:1050:29: warning: no previous prototype for 'saa7164_vbi_next_buf' [-Wmissing-prototypes] drivers/media/pci/saa7164/saa7164-vbi.c:987:5: warning: no previous prototype for 'saa7164_vbi_fmt' [-Wmissing-prototypes] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-27 18:11:11 +02:00
static int saa7164_downloadimage(struct saa7164_dev *dev, u8 *src, u32 srcsize,
u32 dlflags, u8 *dst, u32 dstsize)
{
u32 reg, timeout, offset;
u8 *srcbuf = NULL;
int ret;
u32 dlflag = dlflags;
u32 dlflag_ack = dlflag + 4;
u32 drflag = dlflag_ack + 4;
u32 drflag_ack = drflag + 4;
u32 bleflag = drflag_ack + 4;
dprintk(DBGLVL_FW,
"%s(image=%p, size=%d, flags=0x%x, dst=%p, dstsize=0x%x)\n",
__func__, src, srcsize, dlflags, dst, dstsize);
if ((src == NULL) || (dst == NULL)) {
ret = -EIO;
goto out;
}
srcbuf = kzalloc(4 * 1048576, GFP_KERNEL);
if (NULL == srcbuf) {
ret = -ENOMEM;
goto out;
}
if (srcsize > (4*1048576)) {
ret = -ENOMEM;
goto out;
}
memcpy(srcbuf, src, srcsize);
dprintk(DBGLVL_FW, "%s() dlflag = 0x%x\n", __func__, dlflag);
dprintk(DBGLVL_FW, "%s() dlflag_ack = 0x%x\n", __func__, dlflag_ack);
dprintk(DBGLVL_FW, "%s() drflag = 0x%x\n", __func__, drflag);
dprintk(DBGLVL_FW, "%s() drflag_ack = 0x%x\n", __func__, drflag_ack);
dprintk(DBGLVL_FW, "%s() bleflag = 0x%x\n", __func__, bleflag);
reg = saa7164_readl(dlflag);
dprintk(DBGLVL_FW, "%s() dlflag (0x%x)= 0x%x\n", __func__, dlflag, reg);
if (reg == 1)
dprintk(DBGLVL_FW,
"%s() Download flag already set, please reboot\n",
__func__);
/* Indicate download start */
saa7164_writel(dlflag, 1);
ret = saa7164_dl_wait_ack(dev, dlflag_ack);
if (ret < 0)
goto out;
/* Ack download start, then wait for wait */
saa7164_writel(dlflag, 0);
ret = saa7164_dl_wait_clr(dev, dlflag_ack);
if (ret < 0)
goto out;
/* Deal with the raw firmware, in the appropriate chunk size */
for (offset = 0; srcsize > dstsize;
srcsize -= dstsize, offset += dstsize) {
dprintk(DBGLVL_FW, "%s() memcpy %d\n", __func__, dstsize);
memcpy(dst, srcbuf + offset, dstsize);
/* Flag the data as ready */
saa7164_writel(drflag, 1);
ret = saa7164_dl_wait_ack(dev, drflag_ack);
if (ret < 0)
goto out;
/* Wait for indication data was received */
saa7164_writel(drflag, 0);
ret = saa7164_dl_wait_clr(dev, drflag_ack);
if (ret < 0)
goto out;
}
dprintk(DBGLVL_FW, "%s() memcpy(l) %d\n", __func__, dstsize);
/* Write last block to the device */
memcpy(dst, srcbuf+offset, srcsize);
/* Flag the data as ready */
saa7164_writel(drflag, 1);
ret = saa7164_dl_wait_ack(dev, drflag_ack);
if (ret < 0)
goto out;
saa7164_writel(drflag, 0);
timeout = 0;
while (saa7164_readl(bleflag) != SAA_DEVICE_IMAGE_BOOTING) {
if (saa7164_readl(bleflag) & SAA_DEVICE_IMAGE_CORRUPT) {
printk(KERN_ERR "%s() image corrupt\n", __func__);
ret = -EBUSY;
goto out;
}
if (saa7164_readl(bleflag) & SAA_DEVICE_MEMORY_CORRUPT) {
printk(KERN_ERR "%s() device memory corrupt\n",
__func__);
ret = -EBUSY;
goto out;
}
msleep(10); /* Checkpatch throws a < 20ms warning */
if (timeout++ > 60)
break;
}
printk(KERN_INFO "%s() Image downloaded, booting...\n", __func__);
ret = saa7164_dl_wait_clr(dev, drflag_ack);
if (ret < 0)
goto out;
printk(KERN_INFO "%s() Image booted successfully.\n", __func__);
ret = 0;
out:
kfree(srcbuf);
return ret;
}
/* TODO: Excessive debug */
/* Load the firmware. Optionally it can be in ROM or newer versions
* can be on disk, saving the expense of the ROM hardware. */
int saa7164_downloadfirmware(struct saa7164_dev *dev)
{
/* u32 second_timeout = 60 * SAA_DEVICE_TIMEOUT; */
u32 tmp, filesize, version, err_flags, first_timeout, fwlength;
u32 second_timeout, updatebootloader = 1, bootloadersize = 0;
const struct firmware *fw = NULL;
struct fw_header *hdr, *boothdr = NULL, *fwhdr;
u32 bootloaderversion = 0, fwloadersize;
u8 *bootloaderoffset = NULL, *fwloaderoffset;
char *fwname;
int ret;
dprintk(DBGLVL_FW, "%s()\n", __func__);
if (saa7164_boards[dev->board].chiprev == SAA7164_CHIP_REV2) {
fwname = SAA7164_REV2_FIRMWARE;
fwlength = SAA7164_REV2_FIRMWARE_SIZE;
} else {
fwname = SAA7164_REV3_FIRMWARE;
fwlength = SAA7164_REV3_FIRMWARE_SIZE;
}
version = saa7164_getcurrentfirmwareversion(dev);
if (version == 0x00) {
second_timeout = 100;
first_timeout = 100;
err_flags = saa7164_readl(SAA_BOOTLOADERERROR_FLAGS);
dprintk(DBGLVL_FW, "%s() err_flags = %x\n",
__func__, err_flags);
while (err_flags != SAA_DEVICE_IMAGE_BOOTING) {
dprintk(DBGLVL_FW, "%s() err_flags = %x\n",
__func__, err_flags);
msleep(10); /* Checkpatch throws a < 20ms warning */
if (err_flags & SAA_DEVICE_IMAGE_CORRUPT) {
printk(KERN_ERR "%s() firmware corrupt\n",
__func__);
break;
}
if (err_flags & SAA_DEVICE_MEMORY_CORRUPT) {
printk(KERN_ERR "%s() device memory corrupt\n",
__func__);
break;
}
if (err_flags & SAA_DEVICE_NO_IMAGE) {
printk(KERN_ERR "%s() no first image\n",
__func__);
break;
}
if (err_flags & SAA_DEVICE_IMAGE_SEARCHING) {
first_timeout -= 10;
if (first_timeout == 0) {
printk(KERN_ERR
"%s() no first image\n",
__func__);
break;
}
} else if (err_flags & SAA_DEVICE_IMAGE_LOADING) {
second_timeout -= 10;
if (second_timeout == 0) {
printk(KERN_ERR
"%s() FW load time exceeded\n",
__func__);
break;
}
} else {
second_timeout -= 10;
if (second_timeout == 0) {
printk(KERN_ERR
"%s() Unknown bootloader flags 0x%x\n",
__func__, err_flags);
break;
}
}
err_flags = saa7164_readl(SAA_BOOTLOADERERROR_FLAGS);
} /* While != Booting */
if (err_flags == SAA_DEVICE_IMAGE_BOOTING) {
dprintk(DBGLVL_FW, "%s() Loader 1 has loaded.\n",
__func__);
first_timeout = SAA_DEVICE_TIMEOUT;
second_timeout = 60 * SAA_DEVICE_TIMEOUT;
second_timeout = 100;
err_flags = saa7164_readl(SAA_SECONDSTAGEERROR_FLAGS);
dprintk(DBGLVL_FW, "%s() err_flags2 = %x\n",
__func__, err_flags);
while (err_flags != SAA_DEVICE_IMAGE_BOOTING) {
dprintk(DBGLVL_FW, "%s() err_flags2 = %x\n",
__func__, err_flags);
msleep(10); /* Checkpatch throws a < 20ms warning */
if (err_flags & SAA_DEVICE_IMAGE_CORRUPT) {
printk(KERN_ERR
"%s() firmware corrupt\n",
__func__);
break;
}
if (err_flags & SAA_DEVICE_MEMORY_CORRUPT) {
printk(KERN_ERR
"%s() device memory corrupt\n",
__func__);
break;
}
if (err_flags & SAA_DEVICE_NO_IMAGE) {
printk(KERN_ERR "%s() no first image\n",
__func__);
break;
}
if (err_flags & SAA_DEVICE_IMAGE_SEARCHING) {
first_timeout -= 10;
if (first_timeout == 0) {
printk(KERN_ERR
"%s() no second image\n",
__func__);
break;
}
} else if (err_flags &
SAA_DEVICE_IMAGE_LOADING) {
second_timeout -= 10;
if (second_timeout == 0) {
printk(KERN_ERR
"%s() FW load time exceeded\n",
__func__);
break;
}
} else {
second_timeout -= 10;
if (second_timeout == 0) {
printk(KERN_ERR
"%s() Unknown bootloader flags 0x%x\n",
__func__, err_flags);
break;
}
}
err_flags =
saa7164_readl(SAA_SECONDSTAGEERROR_FLAGS);
} /* err_flags != SAA_DEVICE_IMAGE_BOOTING */
dprintk(DBGLVL_FW, "%s() Loader flags 1:0x%x 2:0x%x.\n",
__func__,
saa7164_readl(SAA_BOOTLOADERERROR_FLAGS),
saa7164_readl(SAA_SECONDSTAGEERROR_FLAGS));
} /* err_flags == SAA_DEVICE_IMAGE_BOOTING */
/* It's possible for both firmwares to have booted,
* but that doesn't mean they've finished booting yet.
*/
if ((saa7164_readl(SAA_BOOTLOADERERROR_FLAGS) ==
SAA_DEVICE_IMAGE_BOOTING) &&
(saa7164_readl(SAA_SECONDSTAGEERROR_FLAGS) ==
SAA_DEVICE_IMAGE_BOOTING)) {
dprintk(DBGLVL_FW, "%s() Loader 2 has loaded.\n",
__func__);
first_timeout = SAA_DEVICE_TIMEOUT;
while (first_timeout) {
msleep(10); /* Checkpatch throws a < 20ms warning */
version =
saa7164_getcurrentfirmwareversion(dev);
if (version) {
dprintk(DBGLVL_FW,
"%s() All f/w loaded successfully\n",
__func__);
break;
} else {
first_timeout -= 10;
if (first_timeout == 0) {
printk(KERN_ERR
"%s() FW did not boot\n",
__func__);
break;
}
}
}
}
version = saa7164_getcurrentfirmwareversion(dev);
} /* version == 0 */
/* Has the firmware really booted? */
if ((saa7164_readl(SAA_BOOTLOADERERROR_FLAGS) ==
SAA_DEVICE_IMAGE_BOOTING) &&
(saa7164_readl(SAA_SECONDSTAGEERROR_FLAGS) ==
SAA_DEVICE_IMAGE_BOOTING) && (version == 0)) {
printk(KERN_ERR
"%s() The firmware hung, probably bad firmware\n",
__func__);
/* Tell the second stage loader we have a deadlock */
saa7164_writel(SAA_DEVICE_DEADLOCK_DETECTED_OFFSET,
SAA_DEVICE_DEADLOCK_DETECTED);
saa7164_getfirmwarestatus(dev);
return -ENOMEM;
}
dprintk(DBGLVL_FW, "Device has Firmware Version %d.%d.%d.%d\n",
(version & 0x0000fc00) >> 10,
(version & 0x000003e0) >> 5,
(version & 0x0000001f),
(version & 0xffff0000) >> 16);
/* Load the firmwware from the disk if required */
if (version == 0) {
printk(KERN_INFO "%s() Waiting for firmware upload (%s)\n",
__func__, fwname);
ret = request_firmware(&fw, fwname, &dev->pci->dev);
if (ret) {
printk(KERN_ERR "%s() Upload failed. "
"(file not found?)\n", __func__);
return -ENOMEM;
}
printk(KERN_INFO "%s() firmware read %Zu bytes.\n",
__func__, fw->size);
if (fw->size != fwlength) {
printk(KERN_ERR "xc5000: firmware incorrect size\n");
ret = -ENOMEM;
goto out;
}
printk(KERN_INFO "%s() firmware loaded.\n", __func__);
hdr = (struct fw_header *)fw->data;
printk(KERN_INFO "Firmware file header part 1:\n");
printk(KERN_INFO " .FirmwareSize = 0x%x\n", hdr->firmwaresize);
printk(KERN_INFO " .BSLSize = 0x%x\n", hdr->bslsize);
printk(KERN_INFO " .Reserved = 0x%x\n", hdr->reserved);
printk(KERN_INFO " .Version = 0x%x\n", hdr->version);
/* Retrieve bootloader if reqd */
if ((hdr->firmwaresize == 0) && (hdr->bslsize == 0))
/* Second bootloader in the firmware file */
filesize = hdr->reserved * 16;
else
filesize = (hdr->firmwaresize + hdr->bslsize) *
16 + sizeof(struct fw_header);
printk(KERN_INFO "%s() SecBootLoader.FileSize = %d\n",
__func__, filesize);
/* Get bootloader (if reqd) and firmware header */
if ((hdr->firmwaresize == 0) && (hdr->bslsize == 0)) {
/* Second boot loader is required */
/* Get the loader header */
boothdr = (struct fw_header *)(fw->data +
sizeof(struct fw_header));
bootloaderversion =
saa7164_readl(SAA_DEVICE_2ND_VERSION);
dprintk(DBGLVL_FW, "Onboard BootLoader:\n");
dprintk(DBGLVL_FW, "->Flag 0x%x\n",
saa7164_readl(SAA_BOOTLOADERERROR_FLAGS));
dprintk(DBGLVL_FW, "->Ack 0x%x\n",
saa7164_readl(SAA_DATAREADY_FLAG_ACK));
dprintk(DBGLVL_FW, "->FW Version 0x%x\n", version);
dprintk(DBGLVL_FW, "->Loader Version 0x%x\n",
bootloaderversion);
if ((saa7164_readl(SAA_BOOTLOADERERROR_FLAGS) ==
0x03) && (saa7164_readl(SAA_DATAREADY_FLAG_ACK)
== 0x00) && (version == 0x00)) {
dprintk(DBGLVL_FW, "BootLoader version in "
"rom %d.%d.%d.%d\n",
(bootloaderversion & 0x0000fc00) >> 10,
(bootloaderversion & 0x000003e0) >> 5,
(bootloaderversion & 0x0000001f),
(bootloaderversion & 0xffff0000) >> 16
);
dprintk(DBGLVL_FW, "BootLoader version "
"in file %d.%d.%d.%d\n",
(boothdr->version & 0x0000fc00) >> 10,
(boothdr->version & 0x000003e0) >> 5,
(boothdr->version & 0x0000001f),
(boothdr->version & 0xffff0000) >> 16
);
if (bootloaderversion == boothdr->version)
updatebootloader = 0;
}
/* Calculate offset to firmware header */
tmp = (boothdr->firmwaresize + boothdr->bslsize) * 16 +
(sizeof(struct fw_header) +
sizeof(struct fw_header));
fwhdr = (struct fw_header *)(fw->data+tmp);
} else {
/* No second boot loader */
fwhdr = hdr;
}
dprintk(DBGLVL_FW, "Firmware version in file %d.%d.%d.%d\n",
(fwhdr->version & 0x0000fc00) >> 10,
(fwhdr->version & 0x000003e0) >> 5,
(fwhdr->version & 0x0000001f),
(fwhdr->version & 0xffff0000) >> 16
);
if (version == fwhdr->version) {
/* No download, firmware already on board */
ret = 0;
goto out;
}
if ((hdr->firmwaresize == 0) && (hdr->bslsize == 0)) {
if (updatebootloader) {
/* Get ready to upload the bootloader */
bootloadersize = (boothdr->firmwaresize +
boothdr->bslsize) * 16 +
sizeof(struct fw_header);
bootloaderoffset = (u8 *)(fw->data +
sizeof(struct fw_header));
dprintk(DBGLVL_FW, "bootloader d/l starts.\n");
printk(KERN_INFO "%s() FirmwareSize = 0x%x\n",
__func__, boothdr->firmwaresize);
printk(KERN_INFO "%s() BSLSize = 0x%x\n",
__func__, boothdr->bslsize);
printk(KERN_INFO "%s() Reserved = 0x%x\n",
__func__, boothdr->reserved);
printk(KERN_INFO "%s() Version = 0x%x\n",
__func__, boothdr->version);
ret = saa7164_downloadimage(
dev,
bootloaderoffset,
bootloadersize,
SAA_DOWNLOAD_FLAGS,
dev->bmmio + SAA_DEVICE_DOWNLOAD_OFFSET,
SAA_DEVICE_BUFFERBLOCKSIZE);
if (ret < 0) {
printk(KERN_ERR
"bootloader d/l has failed\n");
goto out;
}
dprintk(DBGLVL_FW,
"bootloader download complete.\n");
}
printk(KERN_ERR "starting firmware download(2)\n");
bootloadersize = (boothdr->firmwaresize +
boothdr->bslsize) * 16 +
sizeof(struct fw_header);
bootloaderoffset =
(u8 *)(fw->data + sizeof(struct fw_header));
fwloaderoffset = bootloaderoffset + bootloadersize;
/* TODO: fix this bounds overrun here with old f/ws */
fwloadersize = (fwhdr->firmwaresize + fwhdr->bslsize) *
16 + sizeof(struct fw_header);
ret = saa7164_downloadimage(
dev,
fwloaderoffset,
fwloadersize,
SAA_DEVICE_2ND_DOWNLOADFLAG_OFFSET,
dev->bmmio + SAA_DEVICE_2ND_DOWNLOAD_OFFSET,
SAA_DEVICE_2ND_BUFFERBLOCKSIZE);
if (ret < 0) {
printk(KERN_ERR "firmware download failed\n");
goto out;
}
printk(KERN_ERR "firmware download complete.\n");
} else {
/* No bootloader update reqd, download firmware only */
printk(KERN_ERR "starting firmware download(3)\n");
ret = saa7164_downloadimage(
dev,
(u8 *)fw->data,
fw->size,
SAA_DOWNLOAD_FLAGS,
dev->bmmio + SAA_DEVICE_DOWNLOAD_OFFSET,
SAA_DEVICE_BUFFERBLOCKSIZE);
if (ret < 0) {
printk(KERN_ERR "firmware download failed\n");
goto out;
}
printk(KERN_ERR "firmware download complete.\n");
}
}
dev->firmwareloaded = 1;
ret = 0;
out:
release_firmware(fw);
return ret;
}