linux/drivers/block/aoe/aoe.h

202 lines
4.6 KiB
C
Raw Normal View History

/* Copyright (c) 2006 Coraid, Inc. See COPYING for GPL terms. */
#define VERSION "47"
#define AOE_MAJOR 152
#define DEVICE_NAME "aoe"
/* set AOE_PARTITIONS to 1 to use whole-disks only
* default is 16, which is 15 partitions plus the whole disk
*/
#ifndef AOE_PARTITIONS
#define AOE_PARTITIONS (16)
#endif
#define SYSMINOR(aoemajor, aoeminor) ((aoemajor) * NPERSHELF + (aoeminor))
#define AOEMAJOR(sysminor) ((sysminor) / NPERSHELF)
#define AOEMINOR(sysminor) ((sysminor) % NPERSHELF)
#define WHITESPACE " \t\v\f\n"
enum {
AOECMD_ATA,
AOECMD_CFG,
AOEFL_RSP = (1<<3),
AOEFL_ERR = (1<<2),
AOEAFL_EXT = (1<<6),
AOEAFL_DEV = (1<<4),
AOEAFL_ASYNC = (1<<1),
AOEAFL_WRITE = (1<<0),
AOECCMD_READ = 0,
AOECCMD_TEST,
AOECCMD_PTEST,
AOECCMD_SET,
AOECCMD_FSET,
AOE_HVER = 0x10,
};
struct aoe_hdr {
unsigned char dst[6];
unsigned char src[6];
__be16 type;
unsigned char verfl;
unsigned char err;
__be16 major;
unsigned char minor;
unsigned char cmd;
__be32 tag;
};
struct aoe_atahdr {
unsigned char aflags;
unsigned char errfeat;
unsigned char scnt;
unsigned char cmdstat;
unsigned char lba0;
unsigned char lba1;
unsigned char lba2;
unsigned char lba3;
unsigned char lba4;
unsigned char lba5;
unsigned char res[2];
};
struct aoe_cfghdr {
__be16 bufcnt;
__be16 fwver;
unsigned char scnt;
unsigned char aoeccmd;
unsigned char cslen[2];
};
enum {
DEVFL_UP = 1, /* device is installed in system and ready for AoE->ATA commands */
DEVFL_TKILL = (1<<1), /* flag for timer to know when to kill self */
DEVFL_EXT = (1<<2), /* device accepts lba48 commands */
DEVFL_CLOSEWAIT = (1<<3), /* device is waiting for all closes to revalidate */
DEVFL_GDALLOC = (1<<4), /* need to alloc gendisk */
aoe: handle multiple network paths to AoE device A remote AoE device is something can process ATA commands and is identified by an AoE shelf number and an AoE slot number. Such a device might have more than one network interface, and it might be reachable by more than one local network interface. This patch tracks the available network paths available to each AoE device, allowing them to be used more efficiently. Andrew Morton asked about the call to msleep_interruptible in the revalidate function. Yes, if a signal is pending, then msleep_interruptible will not return 0. That means we will not loop but will call aoenet_xmit with a NULL skb, which is a noop. If the system is too low on memory or the aoe driver is too low on frames, then the user can hit control-C to interrupt the attempt to do a revalidate. I have added a comment to the code summarizing that. Andrew Morton asked whether the allocation performed inside addtgt could use a more relaxed allocation like GFP_KERNEL, but addtgt is called when the aoedev lock has been locked with spin_lock_irqsave. It would be nice to allocate the memory under fewer restrictions, but targets are only added when the device is being discovered, and if the target can't be added right now, we can try again in a minute when then next AoE config query broadcast goes out. Andrew Morton pointed out that the "too many targets" message could be printed for failing GFP_ATOMIC allocations. The last patch in this series makes the messages more specific. Signed-off-by: Ed L. Cashin <ecashin@coraid.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 13:20:00 +01:00
DEVFL_KICKME = (1<<5), /* slow polling network card catch */
DEVFL_NEWSIZE = (1<<6), /* need to update dev size in block layer */
BUFFL_FAIL = 1,
};
enum {
DEFAULTBCNT = 2 * 512, /* 2 sectors */
NPERSHELF = 16, /* number of slots per shelf address */
FREETAG = -1,
aoe: handle multiple network paths to AoE device A remote AoE device is something can process ATA commands and is identified by an AoE shelf number and an AoE slot number. Such a device might have more than one network interface, and it might be reachable by more than one local network interface. This patch tracks the available network paths available to each AoE device, allowing them to be used more efficiently. Andrew Morton asked about the call to msleep_interruptible in the revalidate function. Yes, if a signal is pending, then msleep_interruptible will not return 0. That means we will not loop but will call aoenet_xmit with a NULL skb, which is a noop. If the system is too low on memory or the aoe driver is too low on frames, then the user can hit control-C to interrupt the attempt to do a revalidate. I have added a comment to the code summarizing that. Andrew Morton asked whether the allocation performed inside addtgt could use a more relaxed allocation like GFP_KERNEL, but addtgt is called when the aoedev lock has been locked with spin_lock_irqsave. It would be nice to allocate the memory under fewer restrictions, but targets are only added when the device is being discovered, and if the target can't be added right now, we can try again in a minute when then next AoE config query broadcast goes out. Andrew Morton pointed out that the "too many targets" message could be printed for failing GFP_ATOMIC allocations. The last patch in this series makes the messages more specific. Signed-off-by: Ed L. Cashin <ecashin@coraid.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 13:20:00 +01:00
MIN_BUFS = 16,
NTARGETS = 8,
NAOEIFS = 8,
TIMERTICK = HZ / 10,
MINTIMER = HZ >> 2,
MAXTIMER = HZ << 1,
HELPWAIT = 20,
};
struct buf {
struct list_head bufs;
aoe: handle multiple network paths to AoE device A remote AoE device is something can process ATA commands and is identified by an AoE shelf number and an AoE slot number. Such a device might have more than one network interface, and it might be reachable by more than one local network interface. This patch tracks the available network paths available to each AoE device, allowing them to be used more efficiently. Andrew Morton asked about the call to msleep_interruptible in the revalidate function. Yes, if a signal is pending, then msleep_interruptible will not return 0. That means we will not loop but will call aoenet_xmit with a NULL skb, which is a noop. If the system is too low on memory or the aoe driver is too low on frames, then the user can hit control-C to interrupt the attempt to do a revalidate. I have added a comment to the code summarizing that. Andrew Morton asked whether the allocation performed inside addtgt could use a more relaxed allocation like GFP_KERNEL, but addtgt is called when the aoedev lock has been locked with spin_lock_irqsave. It would be nice to allocate the memory under fewer restrictions, but targets are only added when the device is being discovered, and if the target can't be added right now, we can try again in a minute when then next AoE config query broadcast goes out. Andrew Morton pointed out that the "too many targets" message could be printed for failing GFP_ATOMIC allocations. The last patch in this series makes the messages more specific. Signed-off-by: Ed L. Cashin <ecashin@coraid.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 13:20:00 +01:00
ulong stime; /* for disk stats */
ulong flags;
ulong nframesout;
ulong resid;
ulong bv_resid;
aoe: handle multiple network paths to AoE device A remote AoE device is something can process ATA commands and is identified by an AoE shelf number and an AoE slot number. Such a device might have more than one network interface, and it might be reachable by more than one local network interface. This patch tracks the available network paths available to each AoE device, allowing them to be used more efficiently. Andrew Morton asked about the call to msleep_interruptible in the revalidate function. Yes, if a signal is pending, then msleep_interruptible will not return 0. That means we will not loop but will call aoenet_xmit with a NULL skb, which is a noop. If the system is too low on memory or the aoe driver is too low on frames, then the user can hit control-C to interrupt the attempt to do a revalidate. I have added a comment to the code summarizing that. Andrew Morton asked whether the allocation performed inside addtgt could use a more relaxed allocation like GFP_KERNEL, but addtgt is called when the aoedev lock has been locked with spin_lock_irqsave. It would be nice to allocate the memory under fewer restrictions, but targets are only added when the device is being discovered, and if the target can't be added right now, we can try again in a minute when then next AoE config query broadcast goes out. Andrew Morton pointed out that the "too many targets" message could be printed for failing GFP_ATOMIC allocations. The last patch in this series makes the messages more specific. Signed-off-by: Ed L. Cashin <ecashin@coraid.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 13:20:00 +01:00
ulong bv_off;
sector_t sector;
struct bio *bio;
struct bio_vec *bv;
};
struct frame {
int tag;
ulong waited;
struct buf *buf;
char *bufaddr;
ulong bcnt;
sector_t lba;
struct sk_buff *skb;
};
aoe: handle multiple network paths to AoE device A remote AoE device is something can process ATA commands and is identified by an AoE shelf number and an AoE slot number. Such a device might have more than one network interface, and it might be reachable by more than one local network interface. This patch tracks the available network paths available to each AoE device, allowing them to be used more efficiently. Andrew Morton asked about the call to msleep_interruptible in the revalidate function. Yes, if a signal is pending, then msleep_interruptible will not return 0. That means we will not loop but will call aoenet_xmit with a NULL skb, which is a noop. If the system is too low on memory or the aoe driver is too low on frames, then the user can hit control-C to interrupt the attempt to do a revalidate. I have added a comment to the code summarizing that. Andrew Morton asked whether the allocation performed inside addtgt could use a more relaxed allocation like GFP_KERNEL, but addtgt is called when the aoedev lock has been locked with spin_lock_irqsave. It would be nice to allocate the memory under fewer restrictions, but targets are only added when the device is being discovered, and if the target can't be added right now, we can try again in a minute when then next AoE config query broadcast goes out. Andrew Morton pointed out that the "too many targets" message could be printed for failing GFP_ATOMIC allocations. The last patch in this series makes the messages more specific. Signed-off-by: Ed L. Cashin <ecashin@coraid.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 13:20:00 +01:00
struct aoeif {
struct net_device *nd;
unsigned char lost;
unsigned char lostjumbo;
ushort maxbcnt;
};
struct aoetgt {
unsigned char addr[6];
ushort nframes;
struct frame *frames;
struct aoeif ifs[NAOEIFS];
struct aoeif *ifp; /* current aoeif in use */
ushort nout;
ushort maxout;
u16 lasttag; /* last tag sent */
u16 useme;
ulong lastwadj; /* last window adjustment */
int wpkts, rpkts;
};
struct aoedev {
struct aoedev *next;
ulong sysminor;
ulong aoemajor;
aoe: handle multiple network paths to AoE device A remote AoE device is something can process ATA commands and is identified by an AoE shelf number and an AoE slot number. Such a device might have more than one network interface, and it might be reachable by more than one local network interface. This patch tracks the available network paths available to each AoE device, allowing them to be used more efficiently. Andrew Morton asked about the call to msleep_interruptible in the revalidate function. Yes, if a signal is pending, then msleep_interruptible will not return 0. That means we will not loop but will call aoenet_xmit with a NULL skb, which is a noop. If the system is too low on memory or the aoe driver is too low on frames, then the user can hit control-C to interrupt the attempt to do a revalidate. I have added a comment to the code summarizing that. Andrew Morton asked whether the allocation performed inside addtgt could use a more relaxed allocation like GFP_KERNEL, but addtgt is called when the aoedev lock has been locked with spin_lock_irqsave. It would be nice to allocate the memory under fewer restrictions, but targets are only added when the device is being discovered, and if the target can't be added right now, we can try again in a minute when then next AoE config query broadcast goes out. Andrew Morton pointed out that the "too many targets" message could be printed for failing GFP_ATOMIC allocations. The last patch in this series makes the messages more specific. Signed-off-by: Ed L. Cashin <ecashin@coraid.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 13:20:00 +01:00
u16 aoeminor;
u16 flags;
u16 nopen; /* (bd_openers isn't available without sleeping) */
u16 rttavg; /* round trip average of requests/responses */
u16 mintimer;
u16 fw_ver; /* version of blade's firmware */
struct work_struct work;/* disk create work struct */
struct gendisk *gd;
struct request_queue blkq;
struct hd_geometry geo;
sector_t ssize;
struct timer_list timer;
spinlock_t lock;
struct sk_buff *sendq_hd; /* packets needing to be sent, list head */
struct sk_buff *sendq_tl;
mempool_t *bufpool; /* for deadlock-free Buf allocation */
struct list_head bufq; /* queue of bios to work on */
struct buf *inprocess; /* the one we're currently working on */
aoe: handle multiple network paths to AoE device A remote AoE device is something can process ATA commands and is identified by an AoE shelf number and an AoE slot number. Such a device might have more than one network interface, and it might be reachable by more than one local network interface. This patch tracks the available network paths available to each AoE device, allowing them to be used more efficiently. Andrew Morton asked about the call to msleep_interruptible in the revalidate function. Yes, if a signal is pending, then msleep_interruptible will not return 0. That means we will not loop but will call aoenet_xmit with a NULL skb, which is a noop. If the system is too low on memory or the aoe driver is too low on frames, then the user can hit control-C to interrupt the attempt to do a revalidate. I have added a comment to the code summarizing that. Andrew Morton asked whether the allocation performed inside addtgt could use a more relaxed allocation like GFP_KERNEL, but addtgt is called when the aoedev lock has been locked with spin_lock_irqsave. It would be nice to allocate the memory under fewer restrictions, but targets are only added when the device is being discovered, and if the target can't be added right now, we can try again in a minute when then next AoE config query broadcast goes out. Andrew Morton pointed out that the "too many targets" message could be printed for failing GFP_ATOMIC allocations. The last patch in this series makes the messages more specific. Signed-off-by: Ed L. Cashin <ecashin@coraid.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 13:20:00 +01:00
struct aoetgt *targets[NTARGETS];
struct aoetgt **tgt; /* target in use when working */
struct aoetgt **htgt; /* target needing rexmit assistance */
};
int aoeblk_init(void);
void aoeblk_exit(void);
void aoeblk_gdalloc(void *);
void aoedisk_rm_sysfs(struct aoedev *d);
int aoechr_init(void);
void aoechr_exit(void);
void aoechr_error(char *);
void aoecmd_work(struct aoedev *d);
void aoecmd_cfg(ushort aoemajor, unsigned char aoeminor);
void aoecmd_ata_rsp(struct sk_buff *);
void aoecmd_cfg_rsp(struct sk_buff *);
void aoecmd_sleepwork(struct work_struct *);
aoe: handle multiple network paths to AoE device A remote AoE device is something can process ATA commands and is identified by an AoE shelf number and an AoE slot number. Such a device might have more than one network interface, and it might be reachable by more than one local network interface. This patch tracks the available network paths available to each AoE device, allowing them to be used more efficiently. Andrew Morton asked about the call to msleep_interruptible in the revalidate function. Yes, if a signal is pending, then msleep_interruptible will not return 0. That means we will not loop but will call aoenet_xmit with a NULL skb, which is a noop. If the system is too low on memory or the aoe driver is too low on frames, then the user can hit control-C to interrupt the attempt to do a revalidate. I have added a comment to the code summarizing that. Andrew Morton asked whether the allocation performed inside addtgt could use a more relaxed allocation like GFP_KERNEL, but addtgt is called when the aoedev lock has been locked with spin_lock_irqsave. It would be nice to allocate the memory under fewer restrictions, but targets are only added when the device is being discovered, and if the target can't be added right now, we can try again in a minute when then next AoE config query broadcast goes out. Andrew Morton pointed out that the "too many targets" message could be printed for failing GFP_ATOMIC allocations. The last patch in this series makes the messages more specific. Signed-off-by: Ed L. Cashin <ecashin@coraid.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 13:20:00 +01:00
void aoecmd_cleanslate(struct aoedev *);
struct sk_buff *aoecmd_ata_id(struct aoedev *);
int aoedev_init(void);
void aoedev_exit(void);
struct aoedev *aoedev_by_aoeaddr(int maj, int min);
aoe: handle multiple network paths to AoE device A remote AoE device is something can process ATA commands and is identified by an AoE shelf number and an AoE slot number. Such a device might have more than one network interface, and it might be reachable by more than one local network interface. This patch tracks the available network paths available to each AoE device, allowing them to be used more efficiently. Andrew Morton asked about the call to msleep_interruptible in the revalidate function. Yes, if a signal is pending, then msleep_interruptible will not return 0. That means we will not loop but will call aoenet_xmit with a NULL skb, which is a noop. If the system is too low on memory or the aoe driver is too low on frames, then the user can hit control-C to interrupt the attempt to do a revalidate. I have added a comment to the code summarizing that. Andrew Morton asked whether the allocation performed inside addtgt could use a more relaxed allocation like GFP_KERNEL, but addtgt is called when the aoedev lock has been locked with spin_lock_irqsave. It would be nice to allocate the memory under fewer restrictions, but targets are only added when the device is being discovered, and if the target can't be added right now, we can try again in a minute when then next AoE config query broadcast goes out. Andrew Morton pointed out that the "too many targets" message could be printed for failing GFP_ATOMIC allocations. The last patch in this series makes the messages more specific. Signed-off-by: Ed L. Cashin <ecashin@coraid.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 13:20:00 +01:00
struct aoedev *aoedev_by_sysminor_m(ulong sysminor);
void aoedev_downdev(struct aoedev *d);
int aoedev_isbusy(struct aoedev *d);
int aoenet_init(void);
void aoenet_exit(void);
void aoenet_xmit(struct sk_buff *);
int is_aoe_netif(struct net_device *ifp);
int set_aoe_iflist(const char __user *str, size_t size);
unsigned long long mac_addr(char addr[6]);