linux/drivers/mmc/core/queue.c

515 lines
12 KiB
C
Raw Normal View History

/*
* Copyright (C) 2003 Russell King, All Rights Reserved.
* Copyright 2006-2007 Pierre Ossman
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 09:04:11 +01:00
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/blkdev.h>
#include <linux/freezer.h>
#include <linux/kthread.h>
#include <linux/scatterlist.h>
#include <linux/dma-mapping.h>
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
#include "queue.h"
#include "block.h"
#include "core.h"
#include "card.h"
#include "host.h"
static inline bool mmc_cqe_dcmd_busy(struct mmc_queue *mq)
{
/* Allow only 1 DCMD at a time */
return mq->in_flight[MMC_ISSUE_DCMD];
}
void mmc_cqe_check_busy(struct mmc_queue *mq)
{
if ((mq->cqe_busy & MMC_CQE_DCMD_BUSY) && !mmc_cqe_dcmd_busy(mq))
mq->cqe_busy &= ~MMC_CQE_DCMD_BUSY;
mq->cqe_busy &= ~MMC_CQE_QUEUE_FULL;
}
static inline bool mmc_cqe_can_dcmd(struct mmc_host *host)
{
return host->caps2 & MMC_CAP2_CQE_DCMD;
}
static enum mmc_issue_type mmc_cqe_issue_type(struct mmc_host *host,
struct request *req)
{
switch (req_op(req)) {
case REQ_OP_DRV_IN:
case REQ_OP_DRV_OUT:
case REQ_OP_DISCARD:
case REQ_OP_SECURE_ERASE:
return MMC_ISSUE_SYNC;
case REQ_OP_FLUSH:
return mmc_cqe_can_dcmd(host) ? MMC_ISSUE_DCMD : MMC_ISSUE_SYNC;
default:
return MMC_ISSUE_ASYNC;
}
}
enum mmc_issue_type mmc_issue_type(struct mmc_queue *mq, struct request *req)
{
struct mmc_host *host = mq->card->host;
if (mq->use_cqe)
return mmc_cqe_issue_type(host, req);
if (req_op(req) == REQ_OP_READ || req_op(req) == REQ_OP_WRITE)
return MMC_ISSUE_ASYNC;
return MMC_ISSUE_SYNC;
}
static void __mmc_cqe_recovery_notifier(struct mmc_queue *mq)
{
if (!mq->recovery_needed) {
mq->recovery_needed = true;
schedule_work(&mq->recovery_work);
}
}
void mmc_cqe_recovery_notifier(struct mmc_request *mrq)
{
struct mmc_queue_req *mqrq = container_of(mrq, struct mmc_queue_req,
brq.mrq);
struct request *req = mmc_queue_req_to_req(mqrq);
struct request_queue *q = req->q;
struct mmc_queue *mq = q->queuedata;
unsigned long flags;
spin_lock_irqsave(q->queue_lock, flags);
__mmc_cqe_recovery_notifier(mq);
spin_unlock_irqrestore(q->queue_lock, flags);
}
static enum blk_eh_timer_return mmc_cqe_timed_out(struct request *req)
{
struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req);
struct mmc_request *mrq = &mqrq->brq.mrq;
struct mmc_queue *mq = req->q->queuedata;
struct mmc_host *host = mq->card->host;
enum mmc_issue_type issue_type = mmc_issue_type(mq, req);
bool recovery_needed = false;
switch (issue_type) {
case MMC_ISSUE_ASYNC:
case MMC_ISSUE_DCMD:
if (host->cqe_ops->cqe_timeout(host, mrq, &recovery_needed)) {
if (recovery_needed)
__mmc_cqe_recovery_notifier(mq);
return BLK_EH_RESET_TIMER;
}
/* No timeout (XXX: huh? comment doesn't make much sense) */
blk_mq_complete_request(req);
return BLK_EH_DONE;
default:
/* Timeout is handled by mmc core */
return BLK_EH_RESET_TIMER;
}
}
static enum blk_eh_timer_return mmc_mq_timed_out(struct request *req,
bool reserved)
{
struct request_queue *q = req->q;
struct mmc_queue *mq = q->queuedata;
unsigned long flags;
int ret;
spin_lock_irqsave(q->queue_lock, flags);
if (mq->recovery_needed || !mq->use_cqe)
ret = BLK_EH_RESET_TIMER;
else
ret = mmc_cqe_timed_out(req);
spin_unlock_irqrestore(q->queue_lock, flags);
return ret;
}
static void mmc_mq_recovery_handler(struct work_struct *work)
{
struct mmc_queue *mq = container_of(work, struct mmc_queue,
recovery_work);
struct request_queue *q = mq->queue;
mmc_get_card(mq->card, &mq->ctx);
mq->in_recovery = true;
if (mq->use_cqe)
mmc_blk_cqe_recovery(mq);
else
mmc_blk_mq_recovery(mq);
mq->in_recovery = false;
spin_lock_irq(q->queue_lock);
mq->recovery_needed = false;
spin_unlock_irq(q->queue_lock);
mmc_put_card(mq->card, &mq->ctx);
blk_mq_run_hw_queues(q, true);
}
mmc: core: Allocate per-request data using the block layer core The mmc_queue_req is a per-request state container the MMC core uses to carry bounce buffers, pointers to asynchronous requests and so on. Currently allocated as a static array of objects, then as a request comes in, a mmc_queue_req is assigned to it, and used during the lifetime of the request. This is backwards compared to how other block layer drivers work: they usally let the block core provide a per-request struct that get allocated right beind the struct request, and which can be obtained using the blk_mq_rq_to_pdu() helper. (The _mq_ infix in this function name is misleading: it is used by both the old and the MQ block layer.) The per-request struct gets allocated to the size stored in the queue variable .cmd_size initialized using the .init_rq_fn() and cleaned up using .exit_rq_fn(). The block layer code makes the MMC core rely on this mechanism to allocate the per-request mmc_queue_req state container. Doing this make a lot of complicated queue handling go away. We only need to keep the .qnct that keeps count of how many request are currently being processed by the MMC layer. The MQ block layer will replace also this once we transition to it. Doing this refactoring is necessary to move the ioctl() operations into custom block layer requests tagged with REQ_OP_DRV_[IN|OUT] instead of the custom code using the BigMMCHostLock that we have today: those require that per-request data be obtainable easily from a request after creating a custom request with e.g.: struct request *rq = blk_get_request(q, REQ_OP_DRV_IN, __GFP_RECLAIM); struct mmc_queue_req *mq_rq = req_to_mq_rq(rq); And this is not possible with the current construction, as the request is not immediately assigned the per-request state container, but instead it gets assigned when the request finally enters the MMC queue, which is way too late for custom requests. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [Ulf: Folded in the fix to drop a call to blk_cleanup_queue()] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Heiner Kallweit <hkallweit1@gmail.com>
2017-05-18 11:29:32 +02:00
static struct scatterlist *mmc_alloc_sg(int sg_len, gfp_t gfp)
{
struct scatterlist *sg;
mmc: core: Allocate per-request data using the block layer core The mmc_queue_req is a per-request state container the MMC core uses to carry bounce buffers, pointers to asynchronous requests and so on. Currently allocated as a static array of objects, then as a request comes in, a mmc_queue_req is assigned to it, and used during the lifetime of the request. This is backwards compared to how other block layer drivers work: they usally let the block core provide a per-request struct that get allocated right beind the struct request, and which can be obtained using the blk_mq_rq_to_pdu() helper. (The _mq_ infix in this function name is misleading: it is used by both the old and the MQ block layer.) The per-request struct gets allocated to the size stored in the queue variable .cmd_size initialized using the .init_rq_fn() and cleaned up using .exit_rq_fn(). The block layer code makes the MMC core rely on this mechanism to allocate the per-request mmc_queue_req state container. Doing this make a lot of complicated queue handling go away. We only need to keep the .qnct that keeps count of how many request are currently being processed by the MMC layer. The MQ block layer will replace also this once we transition to it. Doing this refactoring is necessary to move the ioctl() operations into custom block layer requests tagged with REQ_OP_DRV_[IN|OUT] instead of the custom code using the BigMMCHostLock that we have today: those require that per-request data be obtainable easily from a request after creating a custom request with e.g.: struct request *rq = blk_get_request(q, REQ_OP_DRV_IN, __GFP_RECLAIM); struct mmc_queue_req *mq_rq = req_to_mq_rq(rq); And this is not possible with the current construction, as the request is not immediately assigned the per-request state container, but instead it gets assigned when the request finally enters the MMC queue, which is way too late for custom requests. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [Ulf: Folded in the fix to drop a call to blk_cleanup_queue()] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Heiner Kallweit <hkallweit1@gmail.com>
2017-05-18 11:29:32 +02:00
sg = kmalloc_array(sg_len, sizeof(*sg), gfp);
if (sg)
sg_init_table(sg, sg_len);
return sg;
}
static void mmc_queue_setup_discard(struct request_queue *q,
struct mmc_card *card)
{
unsigned max_discard;
max_discard = mmc_calc_max_discard(card);
if (!max_discard)
return;
blk_queue_flag_set(QUEUE_FLAG_DISCARD, q);
blk_queue_max_discard_sectors(q, max_discard);
q->limits.discard_granularity = card->pref_erase << 9;
/* granularity must not be greater than max. discard */
if (card->pref_erase > max_discard)
q->limits.discard_granularity = 0;
if (mmc_can_secure_erase_trim(card))
blk_queue_flag_set(QUEUE_FLAG_SECERASE, q);
}
mmc: core: Allocate per-request data using the block layer core The mmc_queue_req is a per-request state container the MMC core uses to carry bounce buffers, pointers to asynchronous requests and so on. Currently allocated as a static array of objects, then as a request comes in, a mmc_queue_req is assigned to it, and used during the lifetime of the request. This is backwards compared to how other block layer drivers work: they usally let the block core provide a per-request struct that get allocated right beind the struct request, and which can be obtained using the blk_mq_rq_to_pdu() helper. (The _mq_ infix in this function name is misleading: it is used by both the old and the MQ block layer.) The per-request struct gets allocated to the size stored in the queue variable .cmd_size initialized using the .init_rq_fn() and cleaned up using .exit_rq_fn(). The block layer code makes the MMC core rely on this mechanism to allocate the per-request mmc_queue_req state container. Doing this make a lot of complicated queue handling go away. We only need to keep the .qnct that keeps count of how many request are currently being processed by the MMC layer. The MQ block layer will replace also this once we transition to it. Doing this refactoring is necessary to move the ioctl() operations into custom block layer requests tagged with REQ_OP_DRV_[IN|OUT] instead of the custom code using the BigMMCHostLock that we have today: those require that per-request data be obtainable easily from a request after creating a custom request with e.g.: struct request *rq = blk_get_request(q, REQ_OP_DRV_IN, __GFP_RECLAIM); struct mmc_queue_req *mq_rq = req_to_mq_rq(rq); And this is not possible with the current construction, as the request is not immediately assigned the per-request state container, but instead it gets assigned when the request finally enters the MMC queue, which is way too late for custom requests. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [Ulf: Folded in the fix to drop a call to blk_cleanup_queue()] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Heiner Kallweit <hkallweit1@gmail.com>
2017-05-18 11:29:32 +02:00
/**
* mmc_init_request() - initialize the MMC-specific per-request data
* @q: the request queue
* @req: the request
* @gfp: memory allocation policy
*/
static int __mmc_init_request(struct mmc_queue *mq, struct request *req,
gfp_t gfp)
{
mmc: core: Allocate per-request data using the block layer core The mmc_queue_req is a per-request state container the MMC core uses to carry bounce buffers, pointers to asynchronous requests and so on. Currently allocated as a static array of objects, then as a request comes in, a mmc_queue_req is assigned to it, and used during the lifetime of the request. This is backwards compared to how other block layer drivers work: they usally let the block core provide a per-request struct that get allocated right beind the struct request, and which can be obtained using the blk_mq_rq_to_pdu() helper. (The _mq_ infix in this function name is misleading: it is used by both the old and the MQ block layer.) The per-request struct gets allocated to the size stored in the queue variable .cmd_size initialized using the .init_rq_fn() and cleaned up using .exit_rq_fn(). The block layer code makes the MMC core rely on this mechanism to allocate the per-request mmc_queue_req state container. Doing this make a lot of complicated queue handling go away. We only need to keep the .qnct that keeps count of how many request are currently being processed by the MMC layer. The MQ block layer will replace also this once we transition to it. Doing this refactoring is necessary to move the ioctl() operations into custom block layer requests tagged with REQ_OP_DRV_[IN|OUT] instead of the custom code using the BigMMCHostLock that we have today: those require that per-request data be obtainable easily from a request after creating a custom request with e.g.: struct request *rq = blk_get_request(q, REQ_OP_DRV_IN, __GFP_RECLAIM); struct mmc_queue_req *mq_rq = req_to_mq_rq(rq); And this is not possible with the current construction, as the request is not immediately assigned the per-request state container, but instead it gets assigned when the request finally enters the MMC queue, which is way too late for custom requests. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [Ulf: Folded in the fix to drop a call to blk_cleanup_queue()] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Heiner Kallweit <hkallweit1@gmail.com>
2017-05-18 11:29:32 +02:00
struct mmc_queue_req *mq_rq = req_to_mmc_queue_req(req);
struct mmc_card *card = mq->card;
struct mmc_host *host = card->host;
mmc: Delete bounce buffer handling In may, Steven sent a patch deleting the bounce buffer handling and the CONFIG_MMC_BLOCK_BOUNCE option. I chose the less invasive path of making it a runtime config option, and we merged that successfully for kernel v4.12. The code is however just standing in the way and taking up space for seemingly no gain on any systems in wide use today. Pierre says the code was there to improve speed on TI SDHCI controllers on certain HP laptops and possibly some Ricoh controllers as well. Early SDHCI controllers lacked the scatter-gather feature, which made software bounce buffers a significant speed boost. We are clearly talking about the list of SDHCI PCI-based MMC/SD card readers found in the pci_ids[] list in drivers/mmc/host/sdhci-pci-core.c. The TI SDHCI derivative is not supported by the upstream kernel. This leaves the Ricoh. What we can however notice is that the x86 defconfigs in the kernel did not enable CONFIG_MMC_BLOCK_BOUNCE option, which means that any such laptop would have to have a custom configured kernel to actually take advantage of this bounce buffer speed-up. It simply seems like there was a speed optimization for the Ricoh controllers that noone was using. (I have not checked the distro defconfigs but I am pretty sure the situation is the same there.) Bounce buffers increased performance on the OMAP HSMMC at one point, and was part of the original submission in commit a45c6cb81647 ("[ARM] 5369/1: omap mmc: Add new omap hsmmc controller for 2430 and 34xx, v3") This optimization was removed in commit 0ccd76d4c236 ("omap_hsmmc: Implement scatter-gather emulation") which found that scatter-gather emulation provided even better performance. The same was introduced for SDHCI in commit 2134a922c6e7 ("sdhci: scatter-gather (ADMA) support") I am pretty positively convinced that software scatter-gather emulation will do for any host controller what the bounce buffers were doing. Essentially, the bounce buffer was a reimplementation of software scatter-gather-emulation in the MMC subsystem, and it should be done away with. Cc: Pierre Ossman <pierre@ossman.eu> Cc: Juha Yrjola <juha.yrjola@solidboot.com> Cc: Steven J. Hill <Steven.Hill@cavium.com> Cc: Shawn Lin <shawn.lin@rock-chips.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Suggested-by: Steven J. Hill <Steven.Hill@cavium.com> Suggested-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-09-20 10:56:14 +02:00
mq_rq->sg = mmc_alloc_sg(host->max_segs, gfp);
if (!mq_rq->sg)
return -ENOMEM;
return 0;
}
mmc: core: Allocate per-request data using the block layer core The mmc_queue_req is a per-request state container the MMC core uses to carry bounce buffers, pointers to asynchronous requests and so on. Currently allocated as a static array of objects, then as a request comes in, a mmc_queue_req is assigned to it, and used during the lifetime of the request. This is backwards compared to how other block layer drivers work: they usally let the block core provide a per-request struct that get allocated right beind the struct request, and which can be obtained using the blk_mq_rq_to_pdu() helper. (The _mq_ infix in this function name is misleading: it is used by both the old and the MQ block layer.) The per-request struct gets allocated to the size stored in the queue variable .cmd_size initialized using the .init_rq_fn() and cleaned up using .exit_rq_fn(). The block layer code makes the MMC core rely on this mechanism to allocate the per-request mmc_queue_req state container. Doing this make a lot of complicated queue handling go away. We only need to keep the .qnct that keeps count of how many request are currently being processed by the MMC layer. The MQ block layer will replace also this once we transition to it. Doing this refactoring is necessary to move the ioctl() operations into custom block layer requests tagged with REQ_OP_DRV_[IN|OUT] instead of the custom code using the BigMMCHostLock that we have today: those require that per-request data be obtainable easily from a request after creating a custom request with e.g.: struct request *rq = blk_get_request(q, REQ_OP_DRV_IN, __GFP_RECLAIM); struct mmc_queue_req *mq_rq = req_to_mq_rq(rq); And this is not possible with the current construction, as the request is not immediately assigned the per-request state container, but instead it gets assigned when the request finally enters the MMC queue, which is way too late for custom requests. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [Ulf: Folded in the fix to drop a call to blk_cleanup_queue()] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Heiner Kallweit <hkallweit1@gmail.com>
2017-05-18 11:29:32 +02:00
static void mmc_exit_request(struct request_queue *q, struct request *req)
{
mmc: core: Allocate per-request data using the block layer core The mmc_queue_req is a per-request state container the MMC core uses to carry bounce buffers, pointers to asynchronous requests and so on. Currently allocated as a static array of objects, then as a request comes in, a mmc_queue_req is assigned to it, and used during the lifetime of the request. This is backwards compared to how other block layer drivers work: they usally let the block core provide a per-request struct that get allocated right beind the struct request, and which can be obtained using the blk_mq_rq_to_pdu() helper. (The _mq_ infix in this function name is misleading: it is used by both the old and the MQ block layer.) The per-request struct gets allocated to the size stored in the queue variable .cmd_size initialized using the .init_rq_fn() and cleaned up using .exit_rq_fn(). The block layer code makes the MMC core rely on this mechanism to allocate the per-request mmc_queue_req state container. Doing this make a lot of complicated queue handling go away. We only need to keep the .qnct that keeps count of how many request are currently being processed by the MMC layer. The MQ block layer will replace also this once we transition to it. Doing this refactoring is necessary to move the ioctl() operations into custom block layer requests tagged with REQ_OP_DRV_[IN|OUT] instead of the custom code using the BigMMCHostLock that we have today: those require that per-request data be obtainable easily from a request after creating a custom request with e.g.: struct request *rq = blk_get_request(q, REQ_OP_DRV_IN, __GFP_RECLAIM); struct mmc_queue_req *mq_rq = req_to_mq_rq(rq); And this is not possible with the current construction, as the request is not immediately assigned the per-request state container, but instead it gets assigned when the request finally enters the MMC queue, which is way too late for custom requests. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [Ulf: Folded in the fix to drop a call to blk_cleanup_queue()] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Heiner Kallweit <hkallweit1@gmail.com>
2017-05-18 11:29:32 +02:00
struct mmc_queue_req *mq_rq = req_to_mmc_queue_req(req);
mmc: core: Allocate per-request data using the block layer core The mmc_queue_req is a per-request state container the MMC core uses to carry bounce buffers, pointers to asynchronous requests and so on. Currently allocated as a static array of objects, then as a request comes in, a mmc_queue_req is assigned to it, and used during the lifetime of the request. This is backwards compared to how other block layer drivers work: they usally let the block core provide a per-request struct that get allocated right beind the struct request, and which can be obtained using the blk_mq_rq_to_pdu() helper. (The _mq_ infix in this function name is misleading: it is used by both the old and the MQ block layer.) The per-request struct gets allocated to the size stored in the queue variable .cmd_size initialized using the .init_rq_fn() and cleaned up using .exit_rq_fn(). The block layer code makes the MMC core rely on this mechanism to allocate the per-request mmc_queue_req state container. Doing this make a lot of complicated queue handling go away. We only need to keep the .qnct that keeps count of how many request are currently being processed by the MMC layer. The MQ block layer will replace also this once we transition to it. Doing this refactoring is necessary to move the ioctl() operations into custom block layer requests tagged with REQ_OP_DRV_[IN|OUT] instead of the custom code using the BigMMCHostLock that we have today: those require that per-request data be obtainable easily from a request after creating a custom request with e.g.: struct request *rq = blk_get_request(q, REQ_OP_DRV_IN, __GFP_RECLAIM); struct mmc_queue_req *mq_rq = req_to_mq_rq(rq); And this is not possible with the current construction, as the request is not immediately assigned the per-request state container, but instead it gets assigned when the request finally enters the MMC queue, which is way too late for custom requests. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [Ulf: Folded in the fix to drop a call to blk_cleanup_queue()] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Heiner Kallweit <hkallweit1@gmail.com>
2017-05-18 11:29:32 +02:00
kfree(mq_rq->sg);
mq_rq->sg = NULL;
}
static int mmc_mq_init_request(struct blk_mq_tag_set *set, struct request *req,
unsigned int hctx_idx, unsigned int numa_node)
{
return __mmc_init_request(set->driver_data, req, GFP_KERNEL);
}
static void mmc_mq_exit_request(struct blk_mq_tag_set *set, struct request *req,
unsigned int hctx_idx)
{
struct mmc_queue *mq = set->driver_data;
mmc_exit_request(mq->queue, req);
}
/*
* We use BLK_MQ_F_BLOCKING and have only 1 hardware queue, which means requests
* will not be dispatched in parallel.
*/
static blk_status_t mmc_mq_queue_rq(struct blk_mq_hw_ctx *hctx,
const struct blk_mq_queue_data *bd)
{
struct request *req = bd->rq;
struct request_queue *q = req->q;
struct mmc_queue *mq = q->queuedata;
struct mmc_card *card = mq->card;
struct mmc_host *host = card->host;
enum mmc_issue_type issue_type;
enum mmc_issued issued;
bool get_card, cqe_retune_ok;
int ret;
if (mmc_card_removed(mq->card)) {
req->rq_flags |= RQF_QUIET;
return BLK_STS_IOERR;
}
issue_type = mmc_issue_type(mq, req);
spin_lock_irq(q->queue_lock);
if (mq->recovery_needed) {
spin_unlock_irq(q->queue_lock);
return BLK_STS_RESOURCE;
}
switch (issue_type) {
case MMC_ISSUE_DCMD:
if (mmc_cqe_dcmd_busy(mq)) {
mq->cqe_busy |= MMC_CQE_DCMD_BUSY;
spin_unlock_irq(q->queue_lock);
return BLK_STS_RESOURCE;
}
break;
case MMC_ISSUE_ASYNC:
break;
default:
/*
* Timeouts are handled by mmc core, and we don't have a host
* API to abort requests, so we can't handle the timeout anyway.
* However, when the timeout happens, blk_mq_complete_request()
* no longer works (to stop the request disappearing under us).
* To avoid racing with that, set a large timeout.
*/
req->timeout = 600 * HZ;
break;
}
mq->in_flight[issue_type] += 1;
get_card = (mmc_tot_in_flight(mq) == 1);
cqe_retune_ok = (mmc_cqe_qcnt(mq) == 1);
spin_unlock_irq(q->queue_lock);
if (!(req->rq_flags & RQF_DONTPREP)) {
req_to_mmc_queue_req(req)->retries = 0;
req->rq_flags |= RQF_DONTPREP;
}
if (get_card)
mmc_get_card(card, &mq->ctx);
if (mq->use_cqe) {
host->retune_now = host->need_retune && cqe_retune_ok &&
!host->hold_retune;
}
blk_mq_start_request(req);
issued = mmc_blk_mq_issue_rq(mq, req);
switch (issued) {
case MMC_REQ_BUSY:
ret = BLK_STS_RESOURCE;
break;
case MMC_REQ_FAILED_TO_START:
ret = BLK_STS_IOERR;
break;
default:
ret = BLK_STS_OK;
break;
}
if (issued != MMC_REQ_STARTED) {
bool put_card = false;
spin_lock_irq(q->queue_lock);
mq->in_flight[issue_type] -= 1;
if (mmc_tot_in_flight(mq) == 0)
put_card = true;
spin_unlock_irq(q->queue_lock);
if (put_card)
mmc_put_card(card, &mq->ctx);
}
return ret;
}
static const struct blk_mq_ops mmc_mq_ops = {
.queue_rq = mmc_mq_queue_rq,
.init_request = mmc_mq_init_request,
.exit_request = mmc_mq_exit_request,
.complete = mmc_blk_mq_complete,
.timeout = mmc_mq_timed_out,
};
static void mmc_setup_queue(struct mmc_queue *mq, struct mmc_card *card)
{
struct mmc_host *host = card->host;
u64 limit = BLK_BOUNCE_HIGH;
if (mmc_dev(host)->dma_mask && *mmc_dev(host)->dma_mask)
limit = (u64)dma_max_pfn(mmc_dev(host)) << PAGE_SHIFT;
blk_queue_flag_set(QUEUE_FLAG_NONROT, mq->queue);
blk_queue_flag_clear(QUEUE_FLAG_ADD_RANDOM, mq->queue);
if (mmc_can_erase(card))
mmc_queue_setup_discard(mq->queue, card);
blk_queue_bounce_limit(mq->queue, limit);
blk_queue_max_hw_sectors(mq->queue,
min(host->max_blk_count, host->max_req_size / 512));
blk_queue_max_segments(mq->queue, host->max_segs);
blk_queue_max_segment_size(mq->queue, host->max_seg_size);
INIT_WORK(&mq->recovery_work, mmc_mq_recovery_handler);
INIT_WORK(&mq->complete_work, mmc_blk_mq_complete_work);
mutex_init(&mq->complete_lock);
init_waitqueue_head(&mq->wait);
}
static int mmc_mq_init_queue(struct mmc_queue *mq, int q_depth,
const struct blk_mq_ops *mq_ops, spinlock_t *lock)
{
int ret;
memset(&mq->tag_set, 0, sizeof(mq->tag_set));
mq->tag_set.ops = mq_ops;
mq->tag_set.queue_depth = q_depth;
mq->tag_set.numa_node = NUMA_NO_NODE;
mq->tag_set.flags = BLK_MQ_F_SHOULD_MERGE | BLK_MQ_F_SG_MERGE |
BLK_MQ_F_BLOCKING;
mq->tag_set.nr_hw_queues = 1;
mq->tag_set.cmd_size = sizeof(struct mmc_queue_req);
mq->tag_set.driver_data = mq;
ret = blk_mq_alloc_tag_set(&mq->tag_set);
if (ret)
return ret;
mq->queue = blk_mq_init_queue(&mq->tag_set);
if (IS_ERR(mq->queue)) {
ret = PTR_ERR(mq->queue);
goto free_tag_set;
}
mq->queue->queue_lock = lock;
mq->queue->queuedata = mq;
return 0;
free_tag_set:
blk_mq_free_tag_set(&mq->tag_set);
return ret;
}
/* Set queue depth to get a reasonable value for q->nr_requests */
#define MMC_QUEUE_DEPTH 64
static int mmc_mq_init(struct mmc_queue *mq, struct mmc_card *card,
spinlock_t *lock)
{
struct mmc_host *host = card->host;
int q_depth;
int ret;
/*
* The queue depth for CQE must match the hardware because the request
* tag is used to index the hardware queue.
*/
if (mq->use_cqe)
q_depth = min_t(int, card->ext_csd.cmdq_depth, host->cqe_qdepth);
else
q_depth = MMC_QUEUE_DEPTH;
ret = mmc_mq_init_queue(mq, q_depth, &mmc_mq_ops, lock);
if (ret)
return ret;
blk_queue_rq_timeout(mq->queue, 60 * HZ);
mmc_setup_queue(mq, card);
return 0;
}
/**
* mmc_init_queue - initialise a queue structure.
* @mq: mmc queue
* @card: mmc card to attach this queue
* @lock: queue lock
* @subname: partition subname
*
* Initialise a MMC card request queue.
*/
int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card,
spinlock_t *lock, const char *subname)
{
struct mmc_host *host = card->host;
mq->card = card;
mq->use_cqe = host->cqe_enabled;
return mmc_mq_init(mq, card, lock);
}
void mmc_queue_suspend(struct mmc_queue *mq)
{
blk_mq_quiesce_queue(mq->queue);
/*
* The host remains claimed while there are outstanding requests, so
* simply claiming and releasing here ensures there are none.
*/
mmc_claim_host(mq->card->host);
mmc_release_host(mq->card->host);
}
void mmc_queue_resume(struct mmc_queue *mq)
{
blk_mq_unquiesce_queue(mq->queue);
}
void mmc_cleanup_queue(struct mmc_queue *mq)
{
struct request_queue *q = mq->queue;
/*
* The legacy code handled the possibility of being suspended,
* so do that here too.
*/
if (blk_queue_quiesced(q))
blk_mq_unquiesce_queue(q);
blk_cleanup_queue(q);
/*
* A request can be completed before the next request, potentially
* leaving a complete_work with nothing to do. Such a work item might
* still be queued at this point. Flush it.
*/
flush_work(&mq->complete_work);
mq->card = NULL;
}
/*
* Prepare the sg list(s) to be handed of to the host driver
*/
unsigned int mmc_queue_map_sg(struct mmc_queue *mq, struct mmc_queue_req *mqrq)
{
struct request *req = mmc_queue_req_to_req(mqrq);
mmc: Delete bounce buffer handling In may, Steven sent a patch deleting the bounce buffer handling and the CONFIG_MMC_BLOCK_BOUNCE option. I chose the less invasive path of making it a runtime config option, and we merged that successfully for kernel v4.12. The code is however just standing in the way and taking up space for seemingly no gain on any systems in wide use today. Pierre says the code was there to improve speed on TI SDHCI controllers on certain HP laptops and possibly some Ricoh controllers as well. Early SDHCI controllers lacked the scatter-gather feature, which made software bounce buffers a significant speed boost. We are clearly talking about the list of SDHCI PCI-based MMC/SD card readers found in the pci_ids[] list in drivers/mmc/host/sdhci-pci-core.c. The TI SDHCI derivative is not supported by the upstream kernel. This leaves the Ricoh. What we can however notice is that the x86 defconfigs in the kernel did not enable CONFIG_MMC_BLOCK_BOUNCE option, which means that any such laptop would have to have a custom configured kernel to actually take advantage of this bounce buffer speed-up. It simply seems like there was a speed optimization for the Ricoh controllers that noone was using. (I have not checked the distro defconfigs but I am pretty sure the situation is the same there.) Bounce buffers increased performance on the OMAP HSMMC at one point, and was part of the original submission in commit a45c6cb81647 ("[ARM] 5369/1: omap mmc: Add new omap hsmmc controller for 2430 and 34xx, v3") This optimization was removed in commit 0ccd76d4c236 ("omap_hsmmc: Implement scatter-gather emulation") which found that scatter-gather emulation provided even better performance. The same was introduced for SDHCI in commit 2134a922c6e7 ("sdhci: scatter-gather (ADMA) support") I am pretty positively convinced that software scatter-gather emulation will do for any host controller what the bounce buffers were doing. Essentially, the bounce buffer was a reimplementation of software scatter-gather-emulation in the MMC subsystem, and it should be done away with. Cc: Pierre Ossman <pierre@ossman.eu> Cc: Juha Yrjola <juha.yrjola@solidboot.com> Cc: Steven J. Hill <Steven.Hill@cavium.com> Cc: Shawn Lin <shawn.lin@rock-chips.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Suggested-by: Steven J. Hill <Steven.Hill@cavium.com> Suggested-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-09-20 10:56:14 +02:00
return blk_rq_map_sg(mq->queue, req, mqrq->sg);
}