OpenE2K/linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
d07fbb8fdf
linux/include/scsi/sas_ata.h

106 lines
2.7 KiB
C
Raw Normal View History

[SCSI] Migrate libsas ATA code into a separate file This is a respin of my earlier patch that migrates the ATA support code into a separate file. For now, the controversial linking bits have been removed per James Bottomley's request for a patch that contains only the migration diffs, which means that libsas continues to require libata. I intend to address that problem in a separate patch. This patch is against the aic94xx-sas-2.6 git tree, and it has been sanity tested on my x206m with Seagate SATA and SAS disks without uncovering any new problems. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-18 23:43:37 +02:00
/*
* Support for SATA devices on Serial Attached SCSI (SAS) controllers
*
* Copyright (C) 2006 IBM Corporation
*
* Written by: Darrick J. Wong <djwong@us.ibm.com>, IBM Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
* USA
*
*/
#ifndef _SAS_ATA_H_
#define _SAS_ATA_H_
#include <linux/libata.h>
#include <scsi/libsas.h>
[SCSI] libsas: make ATA functions selectable by a config option Not everyone wants libsas automatically to pull in libata. This patch makes the behaviour configurable, so you can build libsas with or without ATA support. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-22 20:15:55 +02:00
#ifdef CONFIG_SCSI_SAS_ATA
[SCSI] Migrate libsas ATA code into a separate file This is a respin of my earlier patch that migrates the ATA support code into a separate file. For now, the controversial linking bits have been removed per James Bottomley's request for a patch that contains only the migration diffs, which means that libsas continues to require libata. I intend to address that problem in a separate patch. This patch is against the aic94xx-sas-2.6 git tree, and it has been sanity tested on my x206m with Seagate SATA and SAS disks without uncovering any new problems. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-18 23:43:37 +02:00
static inline int dev_is_sata(struct domain_device *dev)
{
[SCSI] sas: unify the pointlessly separated enums sas_dev_type and sas_device_type These enums have been separate since the dawn of SAS, mainly because the latter is a procotol only enum and the former includes additional state for libsas. The dichotomy causes endless confusion about which one you should use where and leads to pointless warnings like this: drivers/scsi/mvsas/mv_sas.c: In function 'mvs_update_phyinfo': drivers/scsi/mvsas/mv_sas.c:1162:34: warning: comparison between 'enum sas_device_type' and 'enum sas_dev_type' [-Wenum-compare] Fix by eliminating one of them. The one kept is effectively the sas.h one, but call it sas_device_type and make sure the enums are all properly namespaced with the SAS_ prefix. Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-07 23:44:06 +02:00
return dev->dev_type == SAS_SATA_DEV || dev->dev_type == SAS_SATA_PM ||
dev->dev_type == SAS_SATA_PM_PORT || dev->dev_type == SAS_SATA_PENDING;
[SCSI] Migrate libsas ATA code into a separate file This is a respin of my earlier patch that migrates the ATA support code into a separate file. For now, the controversial linking bits have been removed per James Bottomley's request for a patch that contains only the migration diffs, which means that libsas continues to require libata. I intend to address that problem in a separate patch. This patch is against the aic94xx-sas-2.6 git tree, and it has been sanity tested on my x206m with Seagate SATA and SAS disks without uncovering any new problems. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-18 23:43:37 +02:00
}
[SCSI] libsas: let libata recover links that fail to transmit initial sig-fis libsas fails to discover all sata devices in the domain. If a device fails negotiation and does not transmit a signature fis the link needs recovery. libata already understands how to manage slow to come up links, so treat these conditions as ata device attach events for the purposes of creating an ata_port. This allows libata to manage retrying link bring up. Rediscovery is modified to be careful about checking changes in dev_type. It looks like libsas leaks old devices if the sas address changes, but that's a fix for another patch. Acked-by: Jack Wang <jack_wang@usish.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-13 02:57:35 +01:00
int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy);
[SCSI] libsas, libata: fix start of life for a sas ata_port This changes the ordering of initialization and probing events from: 1/ allocate rphy in PORTE_BYTES_DMAED, DISCE_REVALIDATE_DOMAIN 2/ allocate ata_port and schedule port probe in DISCE_PROBE ...to: 1/ allocate ata_port in PORTE_BYTES_DMAED, DISCE_REVALIDATE_DOMAIN 2/ allocate rphy in PORTE_BYTES_DMAED, DISCE_REVALIDATE_DOMAIN 3/ schedule port probe in DISCE_PROBE This ordering prevents PHYE_SIGNAL_LOSS_EVENTS from sneaking in to destrory ata devices before they have been fully initialized: BUG: unable to handle kernel paging request at 0000000000003b10 IP: [<ffffffffa0053d7e>] sas_ata_end_eh+0x12/0x5e [libsas] ... [<ffffffffa004d1af>] sas_unregister_common_dev+0x78/0xc9 [libsas] [<ffffffffa004d4d4>] sas_unregister_dev+0x4f/0xad [libsas] [<ffffffffa004d5b1>] sas_unregister_domain_devices+0x7f/0xbf [libsas] [<ffffffffa004c487>] sas_deform_port+0x61/0x1b8 [libsas] [<ffffffffa004bed0>] sas_phye_loss_of_signal+0x29/0x2b [libsas] ...and kills the awkward "sata domain_device briefly existing in the domain without an ata_port" state. Reported-by: Michal Kosciowski <michal.kosciowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-22 05:09:07 +01:00
int sas_ata_init(struct domain_device *dev);
[SCSI] sas_ata: Implement sas_task_abort for ATA devices ATA devices need special handling for sas_task_abort. If the ATA command came from SCSI, then we merely need to tell SCSI to abort the scsi_cmnd. However, internal commands require a bit more work--we need to fill the qc with the appropriate error status and complete the command, and eventually post_internal will issue the actual ABORT TASK. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-30 10:18:58 +01:00
void sas_ata_task_abort(struct sas_task *task);
libsas: convert to libata new error handler The conversion is quite complex given that the libata new error handler has to be hooked into the current libsas timeout and error handling. The way this is done is to process all the failed commands via libsas first, but if they have no underlying sas task (and they're on a sata device) assume they are destined for the libata error handler and send them accordingly. Finally, activate the port recovery of the libata error handler for each port known to the host. This is somewhat suboptimal, since that port may not need recovering, but given the current architecture of the libata error handler, it's the only way; and the spurious activation is harmless. Signed-off-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-01-23 16:44:12 +01:00
void sas_ata_strategy_handler(struct Scsi_Host *shost);
[SCSI] libsas: fix mixed topology recovery If we have a domain with sas and sata devices there may still be sas recovery actions to take after peeling off the commands to send to libata. Reported-by: Andrzej Jakowski <andrzej.jakowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-11 21:08:36 +01:00
void sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q,
struct list_head *done_q);
[SCSI] libsas: use libata-eh-reset for sata rediscovery fis transmit failures Since sata devices can take several seconds to recover the link on reset the 0.5 seconds that libsas currently waits may not be enough. Instead if we are rediscovering a phy that was previously attached to a sata device let libata handle any resets to encourage the device to transmit the initial fis. Once sas_ata_hard_reset() and lldds learn how to honor 'deadline' libsas should stop encountering phys in an intermediate state, until then this will loop until the fis is transmitted or ->attached_sas_addr gets cleared, but in the more likely initial discovery case we keep existing behavior. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-01 08:23:33 +01:00
void sas_ata_schedule_reset(struct domain_device *dev);
[SCSI] libsas: execute transport link resets with libata-eh via host workqueue Link resets leave ata affiliations intact, so arrange for libsas to make an effort to avoid dropping the device due to a slow-to-recover link. Towards this end carry out reset in the host workqueue so that it can check for ata devices and kick the reset request to libata. Hard resets, in contrast, bypass libata since they are meant for associating an ata device with another initiator in the domain (tears down affiliations). Need to add a new transport_sas_phy_reset() since the current sas_phy_reset() is a utility function to libsas lldds. They are not prepared for it to loop back into eh. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-03 01:07:01 +01:00
void sas_ata_wait_eh(struct domain_device *dev);
[SCSI] libsas: async ata scanning libsas ata error handling is already async but this does not help the scan case. Move initial link recovery out from under host->scan_mutex, and delay synchronization with eh until after all port probe/recovery work has been queued. Device ordering is maintained with scan order by still calling sas_rphy_add() in order of domain discovery. Since we now scan the domain list when invoking libata-eh we need to be careful to check for fully initialized ata ports. Acked-by: Jack Wang <jack_wang@usish.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-19 05:47:01 +01:00
void sas_probe_sata(struct asd_sas_port *port);
[SCSI] libsas: suspend / resume support libsas power management routines to suspend and recover the sas domain based on a model where the lldd is allowed and expected to be "forgetful". sas_suspend_ha - disable event processing allowing the lldd to take down links without concern for causing hotplug events. Regardless of whether the lldd actually posts link down messages libsas notifies the lldd that all domain_devices are gone. sas_prep_resume_ha - on the way back up before the lldd starts link training clean out any spurious events that were generated on the way down, and re-enable event processing sas_resume_ha - after the lldd has started and decided that all phys have posted link-up events this routine is called to let libsas start it's own timeout of any phys that did not resume. After the timeout an lldd can cancel the phy teardown by posting a link-up event. Storage for ex_change_count (u16) and phy_change_count (u8) are changed to int so they can be set to -1 to indicate 'invalidated'. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jacek Danecki <jacek.danecki@intel.com> Tested-by: Maciej Patelczyk <maciej.patelczyk@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-06-22 08:41:51 +02:00
void sas_suspend_sata(struct asd_sas_port *port);
void sas_resume_sata(struct asd_sas_port *port);
[SCSI] libata, libsas: introduce sched_eh and end_eh port ops When managing shost->host_eh_scheduled libata assumes that there is a 1:1 shost-to-ata_port relationship. libsas creates a 1:N relationship so it needs to manage host_eh_scheduled cumulatively at the host level. The sched_eh and end_eh port port ops allow libsas to track when domain devices enter/leave the "eh-pending" state under ha->lock (previously named ha->state_lock, but it is no longer just a lock for ha->state changes). Since host_eh_scheduled indicates eh without backing commands pinning the device it can be deallocated at any time. Move the taking of the domain_device reference under the port_lock to guarantee that the ata_port stays around for the duration of eh. Reviewed-by: Jacek Danecki <jacek.danecki@intel.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-06-22 08:25:27 +02:00
void sas_ata_end_eh(struct ata_port *ap);
[SCSI] libsas: make ATA functions selectable by a config option Not everyone wants libsas automatically to pull in libata. This patch makes the behaviour configurable, so you can build libsas with or without ATA support. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-22 20:15:55 +02:00
#else
static inline int dev_is_sata(struct domain_device *dev)
{
return 0;
}
[SCSI] libsas, libata: fix start of life for a sas ata_port This changes the ordering of initialization and probing events from: 1/ allocate rphy in PORTE_BYTES_DMAED, DISCE_REVALIDATE_DOMAIN 2/ allocate ata_port and schedule port probe in DISCE_PROBE ...to: 1/ allocate ata_port in PORTE_BYTES_DMAED, DISCE_REVALIDATE_DOMAIN 2/ allocate rphy in PORTE_BYTES_DMAED, DISCE_REVALIDATE_DOMAIN 3/ schedule port probe in DISCE_PROBE This ordering prevents PHYE_SIGNAL_LOSS_EVENTS from sneaking in to destrory ata devices before they have been fully initialized: BUG: unable to handle kernel paging request at 0000000000003b10 IP: [<ffffffffa0053d7e>] sas_ata_end_eh+0x12/0x5e [libsas] ... [<ffffffffa004d1af>] sas_unregister_common_dev+0x78/0xc9 [libsas] [<ffffffffa004d4d4>] sas_unregister_dev+0x4f/0xad [libsas] [<ffffffffa004d5b1>] sas_unregister_domain_devices+0x7f/0xbf [libsas] [<ffffffffa004c487>] sas_deform_port+0x61/0x1b8 [libsas] [<ffffffffa004bed0>] sas_phye_loss_of_signal+0x29/0x2b [libsas] ...and kills the awkward "sata domain_device briefly existing in the domain without an ata_port" state. Reported-by: Michal Kosciowski <michal.kosciowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-22 05:09:07 +01:00
static inline int sas_ata_init(struct domain_device *dev)
[SCSI] libsas: make ATA functions selectable by a config option Not everyone wants libsas automatically to pull in libata. This patch makes the behaviour configurable, so you can build libsas with or without ATA support. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-22 20:15:55 +02:00
{
return 0;
}
[SCSI] libsas: fix missing inlines in header file Two functions in include/scsi/sas_ata.h don't have static inlines leading to problems if they're built in: On Thu, 2008-04-03 at 14:06 +0200, Toralf Förster wrote: > drivers/scsi/mvsas.o: In function `sas_ata_init_host_and_port': > mvsas.c:(.text+0x0): multiple definition of `sas_ata_init_host_and_port' > drivers/scsi/libsas/built-in.o:(.text+0x37f4): first defined here > drivers/scsi/mvsas.o: In function `sas_ata_task_abort': > mvsas.c:(.text+0x7): multiple definition of `sas_ata_task_abort' > drivers/scsi/libsas/built-in.o:(.text+0x37fb): first defined here > make[2]: *** [drivers/scsi/built-in.o] Error 1 > make[1]: *** [drivers/scsi] Error 2 > make: *** [drivers] Error 2 Add the correct static inline modifiers. Tested-by: Toralf Förster <toralf.foerster@gmx.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-03 16:04:31 +02:00
static inline void sas_ata_task_abort(struct sas_task *task)
[SCSI] libsas: make ATA functions selectable by a config option Not everyone wants libsas automatically to pull in libata. This patch makes the behaviour configurable, so you can build libsas with or without ATA support. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-22 20:15:55 +02:00
{
}
libsas: convert to libata new error handler The conversion is quite complex given that the libata new error handler has to be hooked into the current libsas timeout and error handling. The way this is done is to process all the failed commands via libsas first, but if they have no underlying sas task (and they're on a sata device) assume they are destined for the libata error handler and send them accordingly. Finally, activate the port recovery of the libata error handler for each port known to the host. This is somewhat suboptimal, since that port may not need recovering, but given the current architecture of the libata error handler, it's the only way; and the spurious activation is harmless. Signed-off-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-01-23 16:44:12 +01:00
static inline void sas_ata_strategy_handler(struct Scsi_Host *shost)
{
}
[SCSI] libsas: fix mixed topology recovery If we have a domain with sas and sata devices there may still be sas recovery actions to take after peeling off the commands to send to libata. Reported-by: Andrzej Jakowski <andrzej.jakowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-11 21:08:36 +01:00
static inline void sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q,
struct list_head *done_q)
libsas: convert to libata new error handler The conversion is quite complex given that the libata new error handler has to be hooked into the current libsas timeout and error handling. The way this is done is to process all the failed commands via libsas first, but if they have no underlying sas task (and they're on a sata device) assume they are destined for the libata error handler and send them accordingly. Finally, activate the port recovery of the libata error handler for each port known to the host. This is somewhat suboptimal, since that port may not need recovering, but given the current architecture of the libata error handler, it's the only way; and the spurious activation is harmless. Signed-off-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-01-23 16:44:12 +01:00
{
}
[SCSI] libsas: use libata-eh-reset for sata rediscovery fis transmit failures Since sata devices can take several seconds to recover the link on reset the 0.5 seconds that libsas currently waits may not be enough. Instead if we are rediscovering a phy that was previously attached to a sata device let libata handle any resets to encourage the device to transmit the initial fis. Once sas_ata_hard_reset() and lldds learn how to honor 'deadline' libsas should stop encountering phys in an intermediate state, until then this will loop until the fis is transmitted or ->attached_sas_addr gets cleared, but in the more likely initial discovery case we keep existing behavior. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-01 08:23:33 +01:00
static inline void sas_ata_schedule_reset(struct domain_device *dev)
{
}
[SCSI] libsas: execute transport link resets with libata-eh via host workqueue Link resets leave ata affiliations intact, so arrange for libsas to make an effort to avoid dropping the device due to a slow-to-recover link. Towards this end carry out reset in the host workqueue so that it can check for ata devices and kick the reset request to libata. Hard resets, in contrast, bypass libata since they are meant for associating an ata device with another initiator in the domain (tears down affiliations). Need to add a new transport_sas_phy_reset() since the current sas_phy_reset() is a utility function to libsas lldds. They are not prepared for it to loop back into eh. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-03 01:07:01 +01:00
static inline void sas_ata_wait_eh(struct domain_device *dev)
{
}
[SCSI] libsas: let libata recover links that fail to transmit initial sig-fis libsas fails to discover all sata devices in the domain. If a device fails negotiation and does not transmit a signature fis the link needs recovery. libata already understands how to manage slow to come up links, so treat these conditions as ata device attach events for the purposes of creating an ata_port. This allows libata to manage retrying link bring up. Rediscovery is modified to be careful about checking changes in dev_type. It looks like libsas leaks old devices if the sas address changes, but that's a fix for another patch. Acked-by: Jack Wang <jack_wang@usish.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-13 02:57:35 +01:00
[SCSI] libsas: async ata scanning libsas ata error handling is already async but this does not help the scan case. Move initial link recovery out from under host->scan_mutex, and delay synchronization with eh until after all port probe/recovery work has been queued. Device ordering is maintained with scan order by still calling sas_rphy_add() in order of domain discovery. Since we now scan the domain list when invoking libata-eh we need to be careful to check for fully initialized ata ports. Acked-by: Jack Wang <jack_wang@usish.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-19 05:47:01 +01:00
static inline void sas_probe_sata(struct asd_sas_port *port)
{
}
[SCSI] libsas: suspend / resume support libsas power management routines to suspend and recover the sas domain based on a model where the lldd is allowed and expected to be "forgetful". sas_suspend_ha - disable event processing allowing the lldd to take down links without concern for causing hotplug events. Regardless of whether the lldd actually posts link down messages libsas notifies the lldd that all domain_devices are gone. sas_prep_resume_ha - on the way back up before the lldd starts link training clean out any spurious events that were generated on the way down, and re-enable event processing sas_resume_ha - after the lldd has started and decided that all phys have posted link-up events this routine is called to let libsas start it's own timeout of any phys that did not resume. After the timeout an lldd can cancel the phy teardown by posting a link-up event. Storage for ex_change_count (u16) and phy_change_count (u8) are changed to int so they can be set to -1 to indicate 'invalidated'. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jacek Danecki <jacek.danecki@intel.com> Tested-by: Maciej Patelczyk <maciej.patelczyk@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-06-22 08:41:51 +02:00
static inline void sas_suspend_sata(struct asd_sas_port *port)
{
}
static inline void sas_resume_sata(struct asd_sas_port *port)
{
}
[SCSI] libsas: let libata recover links that fail to transmit initial sig-fis libsas fails to discover all sata devices in the domain. If a device fails negotiation and does not transmit a signature fis the link needs recovery. libata already understands how to manage slow to come up links, so treat these conditions as ata device attach events for the purposes of creating an ata_port. This allows libata to manage retrying link bring up. Rediscovery is modified to be careful about checking changes in dev_type. It looks like libsas leaks old devices if the sas address changes, but that's a fix for another patch. Acked-by: Jack Wang <jack_wang@usish.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-13 02:57:35 +01:00
static inline int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy)
{
return 0;
}
[SCSI] libata, libsas: introduce sched_eh and end_eh port ops When managing shost->host_eh_scheduled libata assumes that there is a 1:1 shost-to-ata_port relationship. libsas creates a 1:N relationship so it needs to manage host_eh_scheduled cumulatively at the host level. The sched_eh and end_eh port port ops allow libsas to track when domain devices enter/leave the "eh-pending" state under ha->lock (previously named ha->state_lock, but it is no longer just a lock for ha->state changes). Since host_eh_scheduled indicates eh without backing commands pinning the device it can be deallocated at any time. Move the taking of the domain_device reference under the port_lock to guarantee that the ata_port stays around for the duration of eh. Reviewed-by: Jacek Danecki <jacek.danecki@intel.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-06-22 08:25:27 +02:00
static inline void sas_ata_end_eh(struct ata_port *ap)
{
}
[SCSI] libsas: make ATA functions selectable by a config option Not everyone wants libsas automatically to pull in libata. This patch makes the behaviour configurable, so you can build libsas with or without ATA support. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-22 20:15:55 +02:00
#endif
[SCSI] Migrate libsas ATA code into a separate file This is a respin of my earlier patch that migrates the ATA support code into a separate file. For now, the controversial linking bits have been removed per James Bottomley's request for a patch that contains only the migration diffs, which means that libsas continues to require libata. I intend to address that problem in a separate patch. This patch is against the aic94xx-sas-2.6 git tree, and it has been sanity tested on my x206m with Seagate SATA and SAS disks without uncovering any new problems. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-18 23:43:37 +02:00
#endif /* _SAS_ATA_H_ */
Reference in New Issue Copy Permalink