2005-04-17 00:20:36 +02:00
|
|
|
/* vi: ts=8 sw=8
|
|
|
|
*
|
|
|
|
* TI 3410/5052 USB Serial Driver Header
|
|
|
|
*
|
|
|
|
* Copyright (C) 2004 Texas Instruments
|
|
|
|
*
|
|
|
|
* This driver is based on the Linux io_ti driver, which is
|
|
|
|
* Copyright (C) 2000-2002 Inside Out Networks
|
|
|
|
* Copyright (C) 2001-2002 Greg Kroah-Hartman
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
|
|
* (at your option) any later version.
|
|
|
|
*
|
|
|
|
* For questions or problems with this driver, contact Texas Instruments
|
|
|
|
* technical support, or Al Borchers <alborchers@steinerpoint.com>, or
|
|
|
|
* Peter Berger <pberger@brimson.com>.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#ifndef _TI_3410_5052_H_
|
|
|
|
#define _TI_3410_5052_H_
|
|
|
|
|
|
|
|
/* Configuration ids */
|
|
|
|
#define TI_BOOT_CONFIG 1
|
|
|
|
#define TI_ACTIVE_CONFIG 2
|
|
|
|
|
|
|
|
/* Vendor and product ids */
|
|
|
|
#define TI_VENDOR_ID 0x0451
|
2009-01-12 13:31:16 +01:00
|
|
|
#define IBM_VENDOR_ID 0x04b3
|
2005-04-17 00:20:36 +02:00
|
|
|
#define TI_3410_PRODUCT_ID 0x3410
|
2009-01-12 13:31:16 +01:00
|
|
|
#define IBM_4543_PRODUCT_ID 0x4543
|
2009-02-04 16:38:33 +01:00
|
|
|
#define IBM_454B_PRODUCT_ID 0x454b
|
|
|
|
#define IBM_454C_PRODUCT_ID 0x454c
|
2006-11-17 09:21:27 +01:00
|
|
|
#define TI_3410_EZ430_ID 0xF430 /* TI ez430 development tool */
|
2005-04-17 00:20:36 +02:00
|
|
|
#define TI_5052_BOOT_PRODUCT_ID 0x5052 /* no EEPROM, no firmware */
|
|
|
|
#define TI_5152_BOOT_PRODUCT_ID 0x5152 /* no EEPROM, no firmware */
|
|
|
|
#define TI_5052_EEPROM_PRODUCT_ID 0x505A /* EEPROM, no firmware */
|
|
|
|
#define TI_5052_FIRMWARE_PRODUCT_ID 0x505F /* firmware is running */
|
|
|
|
|
2009-01-11 20:49:00 +01:00
|
|
|
/* Multi-Tech vendor and product ids */
|
|
|
|
#define MTS_VENDOR_ID 0x06E0
|
|
|
|
#define MTS_GSM_NO_FW_PRODUCT_ID 0xF108
|
|
|
|
#define MTS_CDMA_NO_FW_PRODUCT_ID 0xF109
|
|
|
|
#define MTS_CDMA_PRODUCT_ID 0xF110
|
|
|
|
#define MTS_GSM_PRODUCT_ID 0xF111
|
|
|
|
#define MTS_EDGE_PRODUCT_ID 0xF112
|
2010-04-23 00:18:20 +02:00
|
|
|
#define MTS_MT9234MU_PRODUCT_ID 0xF114
|
|
|
|
#define MTS_MT9234ZBA_PRODUCT_ID 0xF115
|
|
|
|
#define MTS_MT9234ZBAOLD_PRODUCT_ID 0x0319
|
2009-01-11 20:49:00 +01:00
|
|
|
|
2012-02-20 09:31:57 +01:00
|
|
|
/* Abbott Diabetics vendor and product ids */
|
|
|
|
#define ABBOTT_VENDOR_ID 0x1a61
|
|
|
|
#define ABBOTT_PRODUCT_ID 0x3410
|
|
|
|
|
2005-04-17 00:20:36 +02:00
|
|
|
/* Commands */
|
|
|
|
#define TI_GET_VERSION 0x01
|
|
|
|
#define TI_GET_PORT_STATUS 0x02
|
|
|
|
#define TI_GET_PORT_DEV_INFO 0x03
|
|
|
|
#define TI_GET_CONFIG 0x04
|
|
|
|
#define TI_SET_CONFIG 0x05
|
|
|
|
#define TI_OPEN_PORT 0x06
|
|
|
|
#define TI_CLOSE_PORT 0x07
|
|
|
|
#define TI_START_PORT 0x08
|
|
|
|
#define TI_STOP_PORT 0x09
|
|
|
|
#define TI_TEST_PORT 0x0A
|
|
|
|
#define TI_PURGE_PORT 0x0B
|
|
|
|
#define TI_RESET_EXT_DEVICE 0x0C
|
|
|
|
#define TI_WRITE_DATA 0x80
|
|
|
|
#define TI_READ_DATA 0x81
|
|
|
|
#define TI_REQ_TYPE_CLASS 0x82
|
|
|
|
|
|
|
|
/* Module identifiers */
|
|
|
|
#define TI_I2C_PORT 0x01
|
|
|
|
#define TI_IEEE1284_PORT 0x02
|
|
|
|
#define TI_UART1_PORT 0x03
|
|
|
|
#define TI_UART2_PORT 0x04
|
|
|
|
#define TI_RAM_PORT 0x05
|
|
|
|
|
|
|
|
/* Modem status */
|
|
|
|
#define TI_MSR_DELTA_CTS 0x01
|
|
|
|
#define TI_MSR_DELTA_DSR 0x02
|
|
|
|
#define TI_MSR_DELTA_RI 0x04
|
|
|
|
#define TI_MSR_DELTA_CD 0x08
|
|
|
|
#define TI_MSR_CTS 0x10
|
|
|
|
#define TI_MSR_DSR 0x20
|
|
|
|
#define TI_MSR_RI 0x40
|
|
|
|
#define TI_MSR_CD 0x80
|
|
|
|
#define TI_MSR_DELTA_MASK 0x0F
|
|
|
|
#define TI_MSR_MASK 0xF0
|
|
|
|
|
|
|
|
/* Line status */
|
|
|
|
#define TI_LSR_OVERRUN_ERROR 0x01
|
|
|
|
#define TI_LSR_PARITY_ERROR 0x02
|
|
|
|
#define TI_LSR_FRAMING_ERROR 0x04
|
|
|
|
#define TI_LSR_BREAK 0x08
|
|
|
|
#define TI_LSR_ERROR 0x0F
|
|
|
|
#define TI_LSR_RX_FULL 0x10
|
|
|
|
#define TI_LSR_TX_EMPTY 0x20
|
|
|
|
|
|
|
|
/* Line control */
|
|
|
|
#define TI_LCR_BREAK 0x40
|
|
|
|
|
|
|
|
/* Modem control */
|
|
|
|
#define TI_MCR_LOOP 0x04
|
|
|
|
#define TI_MCR_DTR 0x10
|
|
|
|
#define TI_MCR_RTS 0x20
|
|
|
|
|
|
|
|
/* Mask settings */
|
|
|
|
#define TI_UART_ENABLE_RTS_IN 0x0001
|
|
|
|
#define TI_UART_DISABLE_RTS 0x0002
|
|
|
|
#define TI_UART_ENABLE_PARITY_CHECKING 0x0008
|
|
|
|
#define TI_UART_ENABLE_DSR_OUT 0x0010
|
|
|
|
#define TI_UART_ENABLE_CTS_OUT 0x0020
|
|
|
|
#define TI_UART_ENABLE_X_OUT 0x0040
|
|
|
|
#define TI_UART_ENABLE_XA_OUT 0x0080
|
|
|
|
#define TI_UART_ENABLE_X_IN 0x0100
|
|
|
|
#define TI_UART_ENABLE_DTR_IN 0x0800
|
|
|
|
#define TI_UART_DISABLE_DTR 0x1000
|
|
|
|
#define TI_UART_ENABLE_MS_INTS 0x2000
|
|
|
|
#define TI_UART_ENABLE_AUTO_START_DMA 0x4000
|
|
|
|
|
|
|
|
/* Parity */
|
|
|
|
#define TI_UART_NO_PARITY 0x00
|
|
|
|
#define TI_UART_ODD_PARITY 0x01
|
|
|
|
#define TI_UART_EVEN_PARITY 0x02
|
|
|
|
#define TI_UART_MARK_PARITY 0x03
|
|
|
|
#define TI_UART_SPACE_PARITY 0x04
|
|
|
|
|
|
|
|
/* Stop bits */
|
|
|
|
#define TI_UART_1_STOP_BITS 0x00
|
|
|
|
#define TI_UART_1_5_STOP_BITS 0x01
|
|
|
|
#define TI_UART_2_STOP_BITS 0x02
|
|
|
|
|
|
|
|
/* Bits per character */
|
|
|
|
#define TI_UART_5_DATA_BITS 0x00
|
|
|
|
#define TI_UART_6_DATA_BITS 0x01
|
|
|
|
#define TI_UART_7_DATA_BITS 0x02
|
|
|
|
#define TI_UART_8_DATA_BITS 0x03
|
|
|
|
|
|
|
|
/* 232/485 modes */
|
|
|
|
#define TI_UART_232 0x00
|
|
|
|
#define TI_UART_485_RECEIVER_DISABLED 0x01
|
|
|
|
#define TI_UART_485_RECEIVER_ENABLED 0x02
|
|
|
|
|
|
|
|
/* Pipe transfer mode and timeout */
|
|
|
|
#define TI_PIPE_MODE_CONTINOUS 0x01
|
|
|
|
#define TI_PIPE_MODE_MASK 0x03
|
|
|
|
#define TI_PIPE_TIMEOUT_MASK 0x7C
|
|
|
|
#define TI_PIPE_TIMEOUT_ENABLE 0x80
|
|
|
|
|
|
|
|
/* Config struct */
|
|
|
|
struct ti_uart_config {
|
|
|
|
__u16 wBaudRate;
|
|
|
|
__u16 wFlags;
|
|
|
|
__u8 bDataBits;
|
|
|
|
__u8 bParity;
|
|
|
|
__u8 bStopBits;
|
|
|
|
char cXon;
|
|
|
|
char cXoff;
|
|
|
|
__u8 bUartMode;
|
|
|
|
} __attribute__((packed));
|
|
|
|
|
|
|
|
/* Get port status */
|
|
|
|
struct ti_port_status {
|
|
|
|
__u8 bCmdCode;
|
|
|
|
__u8 bModuleId;
|
|
|
|
__u8 bErrorCode;
|
|
|
|
__u8 bMSR;
|
|
|
|
__u8 bLSR;
|
|
|
|
} __attribute__((packed));
|
|
|
|
|
|
|
|
/* Purge modes */
|
|
|
|
#define TI_PURGE_OUTPUT 0x00
|
|
|
|
#define TI_PURGE_INPUT 0x80
|
|
|
|
|
|
|
|
/* Read/Write data */
|
|
|
|
#define TI_RW_DATA_ADDR_SFR 0x10
|
|
|
|
#define TI_RW_DATA_ADDR_IDATA 0x20
|
|
|
|
#define TI_RW_DATA_ADDR_XDATA 0x30
|
|
|
|
#define TI_RW_DATA_ADDR_CODE 0x40
|
|
|
|
#define TI_RW_DATA_ADDR_GPIO 0x50
|
|
|
|
#define TI_RW_DATA_ADDR_I2C 0x60
|
|
|
|
#define TI_RW_DATA_ADDR_FLASH 0x70
|
|
|
|
#define TI_RW_DATA_ADDR_DSP 0x80
|
|
|
|
|
|
|
|
#define TI_RW_DATA_UNSPECIFIED 0x00
|
|
|
|
#define TI_RW_DATA_BYTE 0x01
|
|
|
|
#define TI_RW_DATA_WORD 0x02
|
|
|
|
#define TI_RW_DATA_DOUBLE_WORD 0x04
|
|
|
|
|
|
|
|
struct ti_write_data_bytes {
|
|
|
|
__u8 bAddrType;
|
|
|
|
__u8 bDataType;
|
|
|
|
__u8 bDataCounter;
|
|
|
|
__be16 wBaseAddrHi;
|
|
|
|
__be16 wBaseAddrLo;
|
|
|
|
__u8 bData[0];
|
|
|
|
} __attribute__((packed));
|
|
|
|
|
|
|
|
struct ti_read_data_request {
|
|
|
|
__u8 bAddrType;
|
|
|
|
__u8 bDataType;
|
|
|
|
__u8 bDataCounter;
|
|
|
|
__be16 wBaseAddrHi;
|
|
|
|
__be16 wBaseAddrLo;
|
|
|
|
} __attribute__((packed));
|
|
|
|
|
|
|
|
struct ti_read_data_bytes {
|
|
|
|
__u8 bCmdCode;
|
|
|
|
__u8 bModuleId;
|
|
|
|
__u8 bErrorCode;
|
|
|
|
__u8 bData[0];
|
|
|
|
} __attribute__((packed));
|
|
|
|
|
|
|
|
/* Interrupt struct */
|
|
|
|
struct ti_interrupt {
|
|
|
|
__u8 bICode;
|
|
|
|
__u8 bIInfo;
|
|
|
|
} __attribute__((packed));
|
|
|
|
|
|
|
|
/* Interrupt codes */
|
|
|
|
#define TI_GET_PORT_FROM_CODE(c) (((c) >> 4) - 3)
|
|
|
|
#define TI_GET_FUNC_FROM_CODE(c) ((c) & 0x0f)
|
|
|
|
#define TI_CODE_HARDWARE_ERROR 0xFF
|
|
|
|
#define TI_CODE_DATA_ERROR 0x03
|
|
|
|
#define TI_CODE_MODEM_STATUS 0x04
|
|
|
|
|
|
|
|
/* Download firmware max packet size */
|
|
|
|
#define TI_DOWNLOAD_MAX_PACKET_SIZE 64
|
|
|
|
|
|
|
|
/* Firmware image header */
|
|
|
|
struct ti_firmware_header {
|
|
|
|
__le16 wLength;
|
|
|
|
__u8 bCheckSum;
|
|
|
|
} __attribute__((packed));
|
|
|
|
|
|
|
|
/* UART addresses */
|
|
|
|
#define TI_UART1_BASE_ADDR 0xFFA0 /* UART 1 base address */
|
|
|
|
#define TI_UART2_BASE_ADDR 0xFFB0 /* UART 2 base address */
|
|
|
|
#define TI_UART_OFFSET_LCR 0x0002 /* UART MCR register offset */
|
|
|
|
#define TI_UART_OFFSET_MCR 0x0004 /* UART MCR register offset */
|
|
|
|
|
|
|
|
#endif /* _TI_3410_5052_H_ */
|